Commit Graph

95 Commits

Author SHA1 Message Date
Jan Kiszka e1c2008af6 pcnet: Add link state support
Update lnkst on link state changes so that guests can obtain this
information via reading back the LED output pin. Works for Linux but
not for guests that depend on the missing PHY.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-01 16:52:09 -05:00
Jan Kiszka 488a1a5dfe pcnet: Move BCR defines to header
This moves BCR defines to the common header and immediately makes use of
them to add BCR_APROMWE, replacing the open-coded write check in
pcnet_aprom_writeb.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-01 16:52:09 -05:00
Michael Brown 366c933245 pcnet: Fix sign extension: make ipxe work with >2G RAM
The problem is with definitions in hw/pcnet.c such as:

  #define CSR_CRDA(S)      ((S)->csr[28] | ((S)->csr[29] << 16))

"(S)->csr[29]" is a uint16_t, but "(S)->csr[29] << 16" gets promoted to
int, so the overall CSR_CRDA(s) is a (signed) int rather than a uint32_t.

This then gets assigned to a uint64_t using

  target_phys_addr_t crda = CSR_CRDA(s);

so when (S)->csr[29] has the high bit set, we end up with
crda=0xffffffffxxxxxxxx.

From: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-01 22:35:25 +02:00
Paolo Bonzini 7447545544 change all other clock references to use nanosecond resolution accessors
This was done with:

    sed -i 's/qemu_get_clock\>/qemu_get_clock_ns/' \
        $(git grep -l 'qemu_get_clock\>' )
    sed -i 's/qemu_new_timer\>/qemu_new_timer_ns/' \
        $(git grep -l 'qemu_new_timer\>' )

after checking that get_clock and new_timer never occur twice
on the same line.  There were no missed occurrences; however, even
if there had been, they would have been caught by the compiler.

There was exactly one false positive in qemu_run_timers:

     -    current_time = qemu_get_clock (clock);
     +    current_time = qemu_get_clock_ns (clock);

which is of course not in this patch.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-03-21 09:23:23 +01:00
William Dauchy 7165448a91 moving eeprom initialization
The initialization should not be only on reset but also when initializing
the device.
It resolves a bug when hot plugging a pci network device: the mac address
was always null.

Signed-off-by: William Dauchy <wdauchy@gmail.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-13 13:24:42 +00:00
Gerhard Wiesinger 219982ef42 hw/pcnet.c: Fix EPROM contents to suit AMD netware drivers
bugfix under DOS for AMD netware driver:
AMD PCNTNW Ethernet MLID v3.10 (960115), network card not found

bugfix works well under DOS with:
1.) AMD NDIS driver v2.0.1
2.) AMD PCNTNW Ethernet MLID v3.10 (960115)
3.) Knoppix 6.2

Signed-off-by: Gerhard Wiesinger <lists@wiesinger.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-05 13:07:25 +00:00
Gleb Natapov 1ca4d09ae0 Add bootindex parameter to net/block/fd device
If bootindex is specified on command line a string that describes device
in firmware readable way is added into sorted list. Later this list will
be passed into firmware to control boot order.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11 21:32:46 +00:00
Paul Brook a4c75a21f3 Split out common pcnet code
The core pcnet emulation code is used by both the PCI "pcnet" device
and the SPARC "lance" device.  Split the common code frm the PCI code so
that that can be configures independantly.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27 11:23:34 +00:00
Jan Kiszka c1ded3dc9f pcnet: Do not receive external frames in loopback mode
While not explicitly stated in the spec, it was observed on real systems
that enabling loopback testing on the pcnet controller disables
reception of external frames. And some legacy software relies on it, so
provide this behavior.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-21 09:16:57 -06:00
Michael S. Tsirkin 9dd749aace pcnet: address TODOs
pcnet enables memory/io on init, which
does not make sense as BAR values are wrong.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
2010-07-11 23:14:57 +03:00
Isaku Yamahata b80d4a9887 pci: don't overwrite multi functio bit in pci header type.
Don't overwrite pci header type.
Otherwise, multi function bit which pci_init_header_type() sets
appropriately is lost.
Anyway PCI_HEADER_TYPE_NORMAL is zero, so it is unnecessary to zero
which is already zero cleared.

how to test:
run qemu and issue info pci to see whether a device in question is
normal device, not pci-to-pci bridge.
This is handy because guest os isn't required.

tested changes:
The following files are covered by using following commands.
sparc64-softmmu
  apb_pci.c, vga-pci.c, cmd646.c, ne2k_pci.c, sun4u.c
ppc-softmmu
  grackle_pci.c, cmd646.c, ne2k_pci.c, vga-pci.c, macio.c
ppc-softmmu -M mac99
  unin_pci.c(uni-north, uni-north-agp)
ppc64-softmmu
  pci-ohci, ne2k_pci, vga-pci, unin_pci.c(u3-agp)
x86_64-softmmu
  acpi_piix4.c, ide/piix.c, piix_pci.c
  -vga vmware vmware_vga.c
  -watchdog i6300esb wdt_i6300esb.c
  -usb usb-uhci.c
  -sound ac97 ac97.c
  -nic model=rtl8139 rtl8139.c
  -nic model=pcnet pcnet.c
  -balloon virtio virtio-pci.c:

untested changes:
The following changes aren't tested.
prep_pci.c: ppc-softmmu -M prep should cover, but core dumped.
unin_pci.c(uni-north-pci): the caller is commented out.
openpic.c: the caller is commented out in ppc_prep.c

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11 20:00:56 +03:00
Michael S. Tsirkin 7a7e5db993 pcnet: make subsystem vendor id match hardware
Real pcnet device (AT2450) apparently has subsystem
device and vendor id set to 0, this is out of spec
(which requires that vendor id is obtained from PCI SIG)
but windows xp driver seems to need this in order
to associate.

qemu sets pci subsystem id to qumranet/qemu
since d350d97d19,
debian does not yet have this patch.

https://bugzilla.redhat.com/show_bug.cgi?id=521247

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
2010-03-15 13:52:06 +02:00
Chris Kilgour 1a8e2aaa3f pcnet APROMWE bit location (retry)
According to AMD document 21485D pp.141, APROMWE is bit 8 of BCR2.

Signed-off-by: Christopher Kilgour <techie@whiterocker.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-08 11:30:09 -06:00
Blue Swirl 884a0c7677 pcnet: remove dead nested assignment, spotted by clang
Although the value stored to 'addr' is used in the enclosing expression,
the value is never actually read from 'addr'.

Probably a typo.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-13 18:59:54 +00:00
Michael S. Tsirkin 97526229da pcnet: switch to symbolic names for pci registers
No functional changes. I verified that the generated binary
does not change.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Glauber Costa <glommer@gmail.com>
2009-12-23 16:35:00 +02:00
Juan Quintela be73cfe2be savevm: Port to qdev.vmsd all devices that have qdev
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 10:05:58 -06:00
Mark McLoughlin 1fa5148223 net: convert pcnet to NICState
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 09:41:31 -06:00
Isaku Yamahata 89e8b13c53 pci: introduce FMT_PCIBUS for printf format for pcibus_t.
This patch is preliminary for 64bit BAR.
Later pcibus_t will be changed from uint32_t to uint64_t.
Introduce FMT_PCIBUS for printf format for pcibus_t.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09 08:43:08 -06:00
Isaku Yamahata 6e355d901b pci: introduce pcibus_t to represent pci bus address/size instead of uint32_t
This patch is preliminary for 64 bit BAR support.
Introduce dedicated type, pcibus_t, to represent pci bus address/size
instead of uint32_t.
Later this type will be changed to uint64_t.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09 08:43:08 -06:00
Isaku Yamahata 0392a017ae pci: s/PCI_ADDRESS_SPACE_/PCI_BASE_ADDRESS_SPACE_/ to match pci_regs.h
make constants for pci base address match pci_regs.h by
renaming PCI_ADDRESS_SPACE_xxx to PCI_BASE_ADDRESS_SPACE_xxx.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09 08:43:07 -06:00
Blue Swirl a01d6ef446 sparc32 (mostly): remove unneeded calls to device reset
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-11-07 08:55:24 +00:00
Juan Quintela 3d8650597d pcnet: port to vmstate
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27 12:28:52 -05:00
Gerd Hoffmann 94e1a912b2 pcnet: split away lance.c (sparc32 code).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27 12:28:40 -05:00
Gerd Hoffmann 7622483395 pcnet: use qdev properties for configuration.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27 12:28:39 -05:00
Jan Kiszka de41ac924b pcnet: Extend hardware reset
Update the IRQ state and stop the poll timer on reset. Moreover,
register the reset function with qemu.

Patchworks-ID: 35462
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-15 09:32:04 -05:00
Jan Kiszka ad323081aa pcnet: Restart poll timer on pcnet_start
Just like we call into pcnet_poll_timer on stop, we need to call it on
start to trigger the setup of the poll timer.

Patchworks-ID: 35313
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08 21:17:22 -05:00
Jan Kiszka efb56cf7c2 pcnet: Drop unused recv_pos field
This state field was never used, simply remained 0. Drop it from the
PCNetState and update the save/restore code accordingly, keeping
backward compatibility.

Patchworks-ID: 35314
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08 21:17:21 -05:00
Gerd Hoffmann e3936fa574 pci: move unregister from PCIDevice to PCIDeviceInfo
One more cleanup while being at it ;)

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05 09:32:48 -05:00
Anthony Liguori c227f0995e Revert "Get rid of _t suffix"
In the very least, a change like this requires discussion on the list.

The naming convention is goofy and it causes a massive merge problem.  Something
like this _must_ be presented on the list first so people can provide input
and cope with it.

This reverts commit 99a0949b72.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01 16:12:16 -05:00
malc 99a0949b72 Get rid of _t suffix
Some not so obvious bits, slirp and Xen were left alone for the time
being.

Signed-off-by: malc <av1474@comtv.ru>
2009-10-01 22:45:02 +04:00
Juan Quintela 6ee093c907 Unexport ticks_per_sec variable. Create get_ticks_per_sec() function
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-11 10:19:52 -05:00
Juan Quintela 0abaa7c100 pcnet: Add pci_pcnet_{save/load} functions, then remove PCNetState pci_dev field
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27 20:47:00 -05:00
Juan Quintela 9fdab57bed pcnet: remove useless casts This are casts to the very type of the function
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27 20:47:00 -05:00
Juan Quintela 1f235a737b pcnet: Change casts to DO_UPCAST() for PCIPCNetState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27 20:47:00 -05:00
Gerd Hoffmann 81a322d4a1 qdev: add return value to init() callbacks.
Sorry folks, but it has to be.  One more of these invasive qdev patches.

We have a serious design bug in the qdev interface:  device init
callbacks can't signal failure because the init() callback has no
return value.  This patch fixes it.

We have already one case in-tree where this is needed:
Try -device virtio-blk-pci (without drive= specified) and watch qemu
segfault.  This patch fixes it.

With usb+scsi being converted to qdev we'll get more devices where the
init callback can fail for various reasons.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27 20:43:28 -05:00
Blue Swirl d60efc6b0d Make CPURead/WriteFunc structure 'const'
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-25 18:29:31 +00:00
Gerd Hoffmann 186507b446 qdev/prop: convert pcnet.c to helper macros.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
2009-08-10 13:05:52 -05:00
Gerd Hoffmann ee6847d19b qdev: rework device properties.
This patch is a major overhaul of the device properties.  The properties
are saved directly in the device state struct now, the linked list of
property values is gone.

Advantages:
  * We don't have to maintain the list with the property values.
  * The value in the property list and the value actually used by
    the device can't go out of sync any more (used to happen for
    the pci.devfn == -1 case) because there is only one place where
    the value is stored.
  * A record describing the property is required now, you can't set
    random properties any more.

There are bus-specific and device-specific properties.  The former
should be used for properties common to all bus drivers.  Typical
use case is bus addressing, i.e. pci.devfn and i2c.address.

Properties have a PropertyInfo struct attached with name, size and
function pointers to parse and print properties.  A few common property
types have PropertyInfos defined in qdev-properties.c.  Drivers are free
to implement their own very special property parsers if needed.

Properties can have default values.  If unset they are zero-filled.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16 17:28:51 -05:00
Gerd Hoffmann 0aab0d3a4a qdev: update pci device registration.
Makes pci_qdev_register take a PCIDeviceInfo struct instead of a bunch
of parameters.  Also adds config_read and config_write callbacks to
PCIDeviceInfo, so drivers needing these can be converted to the qdev
device API too.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2009-07-09 13:07:02 +01:00
Avi Kivity 28c2c26495 Rename pci_register_io_region() to pci_register_bar()
This function is used to manage a PCI BAR, so make the more generic
pci_register_io_region() available to other uses.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16 15:18:38 -05:00
Avi Kivity 1eed09cb4a Remove io_index argument from cpu_register_io_memory()
The parameter is always zero except when registering the three internal
io regions (ROM, unassigned, notdirty).  Remove the parameter to reduce
the API's power, thus facilitating future change.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16 15:18:37 -05:00
Mark McLoughlin 4f1c942b7f net: add return value to packet receive handler
This allows us to handle queue full conditions rather than dropping
the packet on the floor.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09 11:38:49 +01:00
Mark McLoughlin e3f5ec2b5e net: pass VLANClientState* as first arg to receive handlers
Give static type checking a chance to catch errors.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09 11:38:49 +01:00
Mark McLoughlin cda9046ba7 net: re-name vc->fd_read() to vc->receive()
VLANClientState's fd_read() handler doesn't read from file
descriptors, it adds a buffer to the client's receive queue.

Re-name the handlers to make things a little less confusing.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09 11:38:49 +01:00
Mark McLoughlin 463af5349a net: add fd_readv() handler to qemu_new_vlan_client() args
This, apparently, is the style we prefer - all VLANClientState
should be an argument to qemu_new_vlan_client().

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09 11:38:49 +01:00
Paul Brook 067a3ddc88 Remove qdev irq sink handling
We have both IRQ sinks and GPIO inputs.  These are in principle exactly
the same thing, so remove the former.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-26 14:56:11 +01:00
Paul Brook 4856fcff8a Fix lance segfaults
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-22 17:44:32 +01:00
Paul Brook 9d07d7579b PCI network qdev conversion
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14 22:35:07 +01:00
Isaku Yamahata 6407f37373 use PCI_HEADER_TYPE.
use symbolic value instead of 0x0e and related value.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
2009-05-03 19:03:00 +00:00
Chris Wright aff427a1ca Pci nic: pci_register_device can fail
The pci_register_device() call in PCI nic initialization routines can
fail.  Handle this failure and propagate a meaningful error message to
the user instead of generating a SEGV.

Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-01 09:47:14 -05:00