Not used outside C module.
Signed-off-by: Frediano Ziglio <frediano.ziglio@cloud.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Improve
Record/replay feature is not supported for '-rtc base=localtime'
Record/replay feature is not supported for 'smp'
Record/replay feature is not supported for '-snapshot'
to
Record/replay is not supported with -rtc base=localtime
Record/replay is not supported with multiple CPUs
Record/replay is not supported with -snapshot
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This pull request contains two small patches to hv-balloon:
the first one replacing alloca() usage with g_malloc0() + g_autofree
and the second one adding additional declaration of a protocol message
struct with an optional field explicitly defined to avoid a Coverity
warning.
Also included is a VMBus patch to print a warning when it is enabled
without the recommended set of Hyper-V features (enlightenments) since
some Windows versions crash at boot in this case.
-----BEGIN PGP SIGNATURE-----
iQGzBAABCAAdFiEE4ndqq6COJv9aG0oJUrHW6VHQzgcFAmXrQeMACgkQUrHW6VHQ
zgcvWwv9GUCDnidnDka8WGF2wgBEaPPdC2JXcqRFFLADISBAn/3fhsOERO6FwYuN
pouhVEJnHpp9ueNAx+et51ySRzGCaL+VdOGGeReQllIOZGsnOnB8JfM58UE4lX4Z
prCr72bxFsunxRqlqxssejrc8fBhgEQRPo5lQabl73rxftpXkNTHY0CGTwlvnaY1
CzEBTBuowzkZJbQYDL8Qim2HrYqrSnOaend6bbrj9P6P+UFw9wLJU5tkfYCiHUjg
Ux2Fjjx+5+qD9yE7khtxSHqjwWYkR7xA9di1yv4Znqg18gzdbuqnlrKR7F0v98yh
sWFy+fyfVRDg+G2yh2F+vAUjmAJUrfw5+GL3uZTWIevoQUoSHBQfgUEJrlIKvykZ
WP1XuAZRH3m2akDOXOWZVcDhkb3zPKtPJYZ2WncBZk+DLCs/vg94Taq0FcZefBTn
6qsFjs2lHz96uOSzgqICfU34ghcxfU5xgzmvKxKAiriOItmRMHgIYOXLHRfaIJhV
MT/9OMuW
=kVny
-----END PGP SIGNATURE-----
Merge tag 'pull-hv-balloon-20240308' of https://github.com/maciejsszmigiero/qemu into staging
Hyper-V Dynamic Memory and VMBus misc small patches
This pull request contains two small patches to hv-balloon:
the first one replacing alloca() usage with g_malloc0() + g_autofree
and the second one adding additional declaration of a protocol message
struct with an optional field explicitly defined to avoid a Coverity
warning.
Also included is a VMBus patch to print a warning when it is enabled
without the recommended set of Hyper-V features (enlightenments) since
some Windows versions crash at boot in this case.
# -----BEGIN PGP SIGNATURE-----
#
# iQGzBAABCAAdFiEE4ndqq6COJv9aG0oJUrHW6VHQzgcFAmXrQeMACgkQUrHW6VHQ
# zgcvWwv9GUCDnidnDka8WGF2wgBEaPPdC2JXcqRFFLADISBAn/3fhsOERO6FwYuN
# pouhVEJnHpp9ueNAx+et51ySRzGCaL+VdOGGeReQllIOZGsnOnB8JfM58UE4lX4Z
# prCr72bxFsunxRqlqxssejrc8fBhgEQRPo5lQabl73rxftpXkNTHY0CGTwlvnaY1
# CzEBTBuowzkZJbQYDL8Qim2HrYqrSnOaend6bbrj9P6P+UFw9wLJU5tkfYCiHUjg
# Ux2Fjjx+5+qD9yE7khtxSHqjwWYkR7xA9di1yv4Znqg18gzdbuqnlrKR7F0v98yh
# sWFy+fyfVRDg+G2yh2F+vAUjmAJUrfw5+GL3uZTWIevoQUoSHBQfgUEJrlIKvykZ
# WP1XuAZRH3m2akDOXOWZVcDhkb3zPKtPJYZ2WncBZk+DLCs/vg94Taq0FcZefBTn
# 6qsFjs2lHz96uOSzgqICfU34ghcxfU5xgzmvKxKAiriOItmRMHgIYOXLHRfaIJhV
# MT/9OMuW
# =kVny
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 08 Mar 2024 16:50:43 GMT
# gpg: using RSA key E2776AABA08E26FF5A1B4A0952B1D6E951D0CE07
# gpg: Good signature from "Maciej S. Szmigiero <mail@maciej.szmigiero.name>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 727A 0D4D DB9E D9F6 039B ECEF 847F 5E37 90CE 0977
# Subkey fingerprint: E277 6AAB A08E 26FF 5A1B 4A09 52B1 D6E9 51D0 CE07
* tag 'pull-hv-balloon-20240308' of https://github.com/maciejsszmigiero/qemu:
vmbus: Print a warning when enabled without the recommended set of features
hv-balloon: define dm_hot_add_with_region to avoid Coverity warning
hv-balloon: avoid alloca() usage
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a job that can be run, either manually or on a schedule, to upload
a build to Coverity Scan. The job uses the run-coverity-scan script
in multiple phases of check, download tools and upload, in order to
avoid both wasting time (skip everything if you are above the upload
quota) and avoid filling the log with the progress of downloading
the tools.
The job is intended to run on a scheduled pipeline run, and scheduled
runs will not get any other job. It requires two variables to be in
GitLab CI, COVERITY_TOKEN and COVERITY_EMAIL. Those are already set up
in qemu-project's configuration as protected and masked variables.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an option to check if upload is permitted without actually
attempting a build. This can be useful to add a third outcome
beyond success and failure---namely, a CI job can self-cancel
if the uploading quota has been reached.
There is a small change here in that a failure to do the upload
check changes the exit code from 1 to 99. 99 was chosen because
it is what Autotools and Meson use to represent a problem in the
setup (as opposed to a failure in the test).
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add new "select" and "imply" directives if needed. The resulting
config-devices.mak files are the same as before.
Builds without default devices will become much smaller
than before, and qtests fail (as expected, though suboptimal)
for mips64-softmmu because most tests do not use -nodefaults,
so remove it from build-without-defaults
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
touch_all_pages() can return early, before creating threads. In this case,
however, it leaks the MemsetContext that it has allocated at the
beginning of the function.
Reported by Coverity as CID 1534922.
Fixes: 04accf43df ("oslib-posix: initialize backend memory objects in parallel", 2024-02-06)
Reviewed-by: Mark Kanda <mark.kanda@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
deliver_bitmask is allocated on the heap in apic_deliver(), but there
are many paths in the function that return before the corresponding
g_free() is reached. Fix this by switching to g_autofree and, while at
it, also switch to g_new. Do the same in apic_deliver_irq() as well
for consistency.
Fixes: b5ee0468e9 ("apic: add support for x2APIC mode", 2024-02-14)
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bui Quang Minh <minhquangbui99@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Netbsd isn't happy with qemu lsi53c895a emulation:
cd0(esiop0:0:2:0): command with tag id 0 reset
esiop0: autoconfiguration error: phase mismatch without command
esiop0: autoconfiguration error: unhandled scsi interrupt, sist=0x80 sstat1=0x0 DSA=0x23a64b1 DSP=0x50
This is because lsi_bad_phase() triggers a phase mismatch, which
stops SCRIPT processing. However, after returning to
lsi_command_complete(), SCRIPT is restarted with lsi_resume_script().
Fix this by adding a return value to lsi_bad_phase(), and only resume
script processing when lsi_bad_phase() didn't trigger a host interrupt.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Tested-by: Helge Deller <deller@gmx.de>
Message-ID: <20240302214453.2071388-1-svens@stackframe.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
--warn-common ldflag causes warnings for multiple definitions of
___asan_globals_registered when enabling AddressSanitizer with clang.
The warning is somewhat obsolete so just remove it.
The common block is used to allow duplicate definitions of uninitialized
global variables. In the past, GCC and clang used to place such
variables in a common block by default, which prevented programmers for
noticing accidental duplicate definitions. Commit 49237acdb7 ("Enable
ld flag --warn-common") added --warn-common ldflag so that ld warns in
such a case.
Today, both of GCC and clang don't use common blocks by default[1][2] so
any remaining use of common blocks should be intentional. Remove
--warn-common ldflag to suppress warnings for intentional use of
common blocks.
[1]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85678
[2]: https://reviews.llvm.org/D75056
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20240304-common-v1-1-1a2005d1f350@daynix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Original goal of addition of drain_call_rcu to qmp_device_add was to cover
the failure case of qdev_device_add. It seems call of drain_call_rcu was
misplaced in 7bed89958b what led to waiting for pending RCU callbacks
under happy path too. What led to overall performance degradation of
qmp_device_add.
In this patch call of drain_call_rcu moved under handling of failure of
qdev_device_add.
Signed-off-by: Dmitrii Gavrilov <ds-gavr@yandex-team.ru>
Message-ID: <20231103105602.90475-1-ds-gavr@yandex-team.ru>
Fixes: 7bed89958b ("device_core: use drain_call_rcu in in qmp_device_add", 2020-10-12)
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
HP-UX 10.20 seems to make the lsi53c895a spinning on a memory location
under certain circumstances. As the SCSI controller and CPU are not
running at the same time this loop will never finish. After some
time, the check loop interrupts with a unexpected device disconnect.
This works, but is slow because the kernel resets the scsi controller.
Instead of signaling UDC, start a timer and exit the loop. Until the
timer fires, the CPU can process instructions which might changes the
memory location.
The limit of instructions is also reduced because scripts running on
the SCSI processor are usually very short. This keeps the time until
the loop is exit short.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-ID: <20240229204407.1699260-1-svens@stackframe.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the code to a separate file so that we do not have to compile
it anymore if CONFIG_ARM_V7M is not set.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240308141051.536599-2-thuth@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some Windows versions crash at boot or fail to enable the VMBus device if
they don't see the expected set of Hyper-V features (enlightenments).
Since this provides poor user experience let's warn user if the VMBus
device is enabled without the recommended set of Hyper-V features.
The recommended set is the minimum set of Hyper-V features required to make
the VMBus device work properly in Windows Server versions 2016, 2019 and
2022.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Since the presence of a hot add memory region is optional in hot add
request message it wasn't part of this message declaration
(struct dm_hot_add).
Instead, the code allocated such enlarged message by simply adding the
necessary size for this extra field to the size of basic hot add message
struct.
However, Coverity considers accessing this extra member to be
an out-of-bounds access, even thought the memory is actually there.
Fix this by adding an extended variant of this message that explicitly has
an additional union dm_mem_page_range at its end.
CID: #1523903
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
alloca() is frowned upon, replace it with g_malloc0() + g_autofree.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
MCFG segments should point to PCI configuration range, not BAR MMIO.
Signed-off-by: Ilya Chugin <danger_mail@list.ru>
Fixes: 55ecd83b36 ("hw/riscv/virt-acpi-build.c: Add IO controllers and devices")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Message-ID: <180d236d-c8e4-411a-b4d2-632eb82092fa@list.ru>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
G-stage translation should be considered to be user-level access in
riscv_cpu_get_phys_page_debug(), as already done in riscv_cpu_tlb_fill().
This fixes a bug that prevents gdb from reading memory while the VM is
running in VS-mode.
Signed-off-by: Hiroaki Yamamoto <hrak1529@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240228081028.35081-1-hrak1529@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The reads to in_clrip[x] registers return rectified input values of the
interrupt sources.
A rectified input value of an interrupt source is defined by the section
"4.5.2 Source configurations (sourcecfg[1]–sourcecfg[1023])" of the RISC-V
AIA specification as:
"rectified input value = (incoming wire value) XOR (source is inverted)"
Update the riscv_aplic_read_input_word() implementation to match the above.
Fixes: e8f79343cf ("hw/intc: Add RISC-V AIA APLIC device emulation")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240306095722.463296-3-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The writes to setipnum_le register in APLIC MSI-mode have special
consideration for level-triggered interrupts as-per section "4.9.2
Special consideration for level-sensitive interrupt sources" of the
RISC-V AIA specification.
Particularly, the below text from the RISC-V specification defines
the behaviour of writes to setipnum_le for level-triggered interrupts:
"A second option is for the interrupt service routine to write the
APLIC’s source identity number for the interrupt to the domain’s
setipnum register just before exiting. This will cause the interrupt’s
pending bit to be set to one again if the source is still asserting
an interrupt, but not if the source is not asserting an interrupt."
Fix setipnum_le write emulation for APLIC MSI-mode by implementing
the above behaviour in riscv_aplic_set_pending() function.
Fixes: e8f79343cf ("hw/intc: Add RISC-V AIA APLIC device emulation")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240306095722.463296-2-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The result of (8 - 3 - vlmul) is negative when vlmul >= 6,
and results in wrong vill.
Signed-off-by: demin.han <demin.han@starfivetech.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240225174114.5298-1-demin.han@starfivetech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
After the 'mark_vs_dirty' changes from the previous patch the 'is_store'
bool is unused in some load/store functions that were changed. Remove it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240306171932.549549-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
While discussing a problem with how we're (not) setting vstart_eq_zero
Richard had the following to say w.r.t the conditional mark_vs_dirty()
calls on load/store functions [1]:
"I think it's required to have stores set dirty unconditionally, before
the operation.
Consider a store that traps on the 2nd element, leaving vstart = 2, and
exiting to the main loop via exception. The exception enters the kernel
page fault handler. The kernel may need to fault in the page for the
process, and in the meantime task switch.
If vs dirty is not already set, the kernel won't know to save vector
state on task switch."
Do a mark_vs_dirty() before both loads and stores.
[1] https://lore.kernel.org/qemu-riscv/72c7503b-0f43-44b8-aa82-fbafed2aac0c@linaro.org/
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240306171932.549549-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
mcountinhibit, mcounteren, scounteren and hcounteren must always be 32-bit
by privileged spec
Signed-off-by: Vadim Shakirov <vadim.shakirov@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20240202113919.18236-1-vadim.shakirov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
smaia and ssaia were ratified in August 25th 2023 [1].
zvfh and zvfhmin were ratified in August 2nd 2023 [2].
zfbfmin and zvfbf(min|wma) are frozen and moved to public review since
Dec 16th 2023 [3].
zaamo and zalrsc are both marked as "Frozen" since January 24th 2024
[4].
[1] https://jira.riscv.org/browse/RVS-438
[2] https://jira.riscv.org/browse/RVS-871
[3] https://jira.riscv.org/browse/RVS-704
[4] https://jira.riscv.org/browse/RVS-1995
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240301144053.265964-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The last KVM extensions added were back in 6.6. Sync them to Linux 6.8.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240304134732.386590-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The idea with this update is to get the latest KVM caps for RISC-V.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240304134732.386590-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Running test-fcvtmod triggers the following deprecation warning:
warning: CPU property 'Zfa' is deprecated. Please use 'zfa' instead
Let's fix that.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240229180656.1208881-1-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch exposes Ztso via hwprobe in QEMU's user space emulator.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240207122256.902627-3-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Ztso extension is already ratified, this adds it as a CPU property
and adds various fences throughout the port in order to allow TSO
targets to function on weaker hosts. We need no fences for AMOs as
they're already SC, the places we need barriers are described.
These fences are placed in the RISC-V backend rather than TCG as is
planned for x86-on-arm64 because RISC-V allows heterogeneous (and
likely soon dynamic) hart memory models.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-ID: <20240207122256.902627-2-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a RISC-V 'virt' machine to the graph. This implementation is a
modified copy of the existing arm machine in arm-virt-machine.c
It contains a virtio-mmio and a generic-pcihost controller. The
generic-pcihost controller hardcodes assumptions from the ARM 'virt'
machine, like ecam and pio_base addresses, so we'll add an extra step to
set its parameters after creating it.
Our command line is incremented with 'aclint' parameters to allow the
machine to run MSI tests.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240217192607.32565-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 'virt' machine makes assumptions on the Advanced Core-Local
Interruptor, or aclint, based on 'tcg_enabled()' conditionals. This
will impact MSI related tests support when adding a RISC-V 'virt' libqos
machine. The accelerator used in that case, 'qtest', isn't being
accounted for and we'll error out if we try to enable aclint.
Create a new virt_aclint_allowed() helper to gate the aclint code
considering both TCG and 'qtest' accelerators. The error message is
left untouched, mentioning TCG only, because we don't expect the
regular user to be aware of 'qtest'.
We want to add 'qtest' support for aclint only, leaving the TCG specific
bits out of it. This is done by changing the current format we use
today:
if (tcg_enabled()) {
if (s->have_aclint) { - aclint logic - }
else { - non-aclint, TCG logic - }
}
into:
if (virt_aclint_allowed() && s->have_aclint) {
- aclint logic -
} else if (tcg_enabled()) {
- non-aclint, TCG logic -
}
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240217192607.32565-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We want to add a RISC-V 'virt' libqos machine to increase our test
coverage. Some of the tests will try to plug a virtio-iommu-pci
device into the board and do some tests with it.
Enable virtio-iommu-pci in the 'virt' machine.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240217192607.32565-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Hotplugged FDT nodes will attempt to write this node that, at this
moment, is being created only in create_fdt_pcie() during
finalize_fdt().
Create it earlier.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240217192607.32565-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Enable ACPI NUMA support by adding the following 2 ACPI tables:
SRAT: provides the association for memory/Harts and Proximity Domains
SLIT: provides the relative distance between Proximity Domains
The SRAT RINTC Affinity Structure definition[1] was based on the recently
approved ACPI CodeFirst ECR[2].
[1] https://github.com/riscv-non-isa/riscv-acpi/issues/25
[2] https://mantis.uefi.org/mantis/view.php?id=2433
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20240129094200.3581037-1-haibo1.xu@intel.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add missing include guard in pmu.h to avoid the problem of double
inclusion.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240220110907.10479-1-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Added xATP_MODE validation for vsatp/hgatp CSRs.
The xATP register is an SXLEN-bit read/write WARL register, so
the legal value must be returned (See riscv-privileged-20211203, SATP/VSATP/HGATP CSRs).
Signed-off-by: Irina Ryapolova <irina.ryapolova@syntacore.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240109145923.37893-2-irina.ryapolova@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The SATP register is an SXLEN-bit read/write WARL register. It means that CSR fields are only defined
for a subset of bit encodings, but allow any value to be written while guaranteeing to return a legal
value whenever read (See riscv-privileged-20211203, SATP CSR).
For example on rv64 we are trying to write to SATP CSR val = 0x1000000000000000 (SATP_MODE = 1 - Reserved for standard use)
and after that we are trying to read SATP_CSR. We read from the SATP CSR value = 0x1000000000000000, which is not a correct
operation (return illegal value).
Signed-off-by: Irina Ryapolova <irina.ryapolova@syntacore.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240109145923.37893-1-irina.ryapolova@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Named features are extensions which don't make sense for users to
control and are therefore not exposed on the command line. However,
svade is an extension which makes sense for users to control, so treat
it like a "normal" extension. The default is false, even for the max
cpu type, since QEMU has always implemented hardware A/D PTE bit
updating, so users must opt into svade (or get it from a CPU type
which enables it by default).
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240215223955.969568-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Gate hardware A/D PTE bit updating on {m,h}envcfg.ADUE and only
enable menvcfg.ADUE on reset if svade has not been selected. Now
that we also consider svade, we have four possible configurations:
1) !svade && !svadu
use hardware updating and there's no way to disable it
(the default, which maintains past behavior. Maintaining
the default, even with !svadu is a change that fixes [1])
2) !svade && svadu
use hardware updating, but also provide {m,h}envcfg.ADUE,
allowing software to switch to exception mode
(being able to switch is a change which fixes [1])
3) svade && !svadu
use exception mode and there's no way to switch to hardware
updating
(this behavior change fixes [2])
4) svade && svadu
use exception mode, but also provide {m,h}envcfg.ADUE,
allowing software to switch to hardware updating
(this behavior change fixes [2])
Fixes: 0af3f115e6 ("target/riscv: Add *envcfg.HADE related check in address translation") [1]
Fixes: 48531f5adb ("target/riscv: implement svade") [2]
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240215223955.969568-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The hypervisor should decide what it wants to enable. Zero all
configuration enable bits on reset.
Also, commit ed67d63798 ("target/riscv: Update CSR bits name for
svadu extension") missed one reference to 'hade'. Change it now.
Fixes: 0af3f115e6 ("target/riscv: Add *envcfg.HADE related check in address translation")
Fixes: ed67d63798 ("target/riscv: Update CSR bits name for svadu extension")
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240215223955.969568-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RVA22U64 and RVA22S64 profiles mandates certain extensions that,
until now, we were implying that they were available.
We can't do this anymore since named features also has a riscv,isa
entry. Let's add them to riscv_cpu_named_features[].
Instead of adding one bool for each named feature that we'll always
implement, i.e. can't be turned off, add a 'ext_always_enabled' bool in
cpu->cfg. This bool will be set to 'true' in TCG accel init, and all
named features will point to it. This also means that KVM won't see
these features as always enable, which is our intention.
If any accelerator adds support to disable one of these features, we'll
have to promote them to regular extensions and allow users to disable it
via command line.
After this patch, here's the riscv,isa from a buildroot using the
'rva22s64' CPU:
# cat /proc/device-tree/cpus/cpu@0/riscv,isa
rv64imafdc_zic64b_zicbom_zicbop_zicboz_ziccamoa_ziccif_zicclsm_ziccrse_
zicntr_zicsr_zifencei_zihintpause_zihpm_za64rs_zfhmin_zca_zcd_zba_zbb_
zbs_zkt_ssccptr_sscounterenw_sstvala_sstvecd_svade_svinval_svpbmt#
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20240215223955.969568-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Further discussions after the introduction of rva22 support in QEMU
revealed that what we've been calling 'named features' are actually
regular extensions, with their respective riscv,isa DTs. This is
clarified in [1]. [2] is a bug tracker asking for the profile spec to be
less cryptic about it.
As far as QEMU goes we understand extensions as something that the user
can enable/disable in the command line. This isn't the case for named
features, so we'll have to reach a middle ground.
We'll keep our existing nomenclature 'named features' to refer to any
extension that the user can't control in the command line. We'll also do
the following:
- 'svade' and 'zic64b' flags are renamed to 'ext_svade' and
'ext_zic64b'. 'ext_svade' and 'ext_zic64b' now have riscv,isa strings and
priv_spec versions;
- skip name feature check in cpu_bump_multi_ext_priv_ver(). Now that
named features have a riscv,isa and an entry in isa_edata_arr[] we
don't need to gate the call to cpu_cfg_ext_get_min_version() anymore.
[1] https://github.com/riscv/riscv-profiles/issues/121
[2] https://github.com/riscv/riscv-profiles/issues/142
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240215223955.969568-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Recent changes in options handling removed the 'mmu' default the bare
CPUs had, meaning that we must enable 'mmu' by hand when using the
rva22s64 profile CPU.
Given that this profile is setting a satp mode, it already implies that
we need a 'mmu'. Enable the 'mmu' in this case.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240215223955.969568-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Upstream Linux recently added many additional keys to the hwprobe API.
This patch adds support for all of them with the exception of Ztso,
which is currently not supported in QEMU.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240207115926.887816-3-christoph.muellner@vrull.eu>
[ Changes by AF:
- Fixup whitespace
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
