Current POWER cpus allow for a VRMA, a special mapping which describes a
guest's view of memory when in real mode (MMU off, from the guest's point
of view). Older cpus didn't have that which meant that to support a guest
a special host-contiguous region of memory was needed to give the guest its
Real Mode Area (RMA).
KVM used to provide special calls to allocate a contiguous RMA for those
cases. This was useful in the early days of KVM on Power to allow it to be
tested on PowerPC 970 chips as used in Macintosh G5 machines. Now, those
machines are so old as to be almost irrelevant.
The normal qemu deprecation process would require this to be marked
deprecated then removed in 2 releases. However, this can only be used
with corresponding support in the host kernel - which was dropped
years ago (in c17b98cf "KVM: PPC: Book3S HV: Remove code for PPC970
processors" of 2014-12-03 to be precise). Therefore it should be ok
to drop this immediately.
Just to be clear this only affects *KVM HV* guests with PowerPC 970,
and those already require an ancient host kernel. TCG and KVM PR
guests with PowerPC 970 should still work.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Thomas Huth <thuth@redhat.com>
The Partition Table Control Register (PTCR) is a hypervisor privileged
SPR. It contains the host real address of the Partition Table and its
size.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
commit e57ca75ce3 ("target/ppc: Manage external HPT via virtual
hypervisor") exported a set of methods to manipulate the HPT from the
core hash MMU. But SPR_SDR1 is still used under some circumstances to
get the base address of the HPT, which is incorrect for the sPAPR
machines.
Only the logging should be impacted.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
cpu_ppc_set_papr() removes the EP and HV bits from the MSR mask. While
removing the HV bit makes sense (a cpu in PAPR mode should never be
emulated in hypervisor mode), the EP bit is just bizarre. Although it's
true that a papr mode guest shouldn't be able to change the exception
prefix, the MSR[EP] bit doesn't even exist on the cpus supported for PAPR
mode, so it's pointless to do anything with it here.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The env->slb_nr field gives the size of the SLB (Segment Lookaside Buffer).
This is another static-after-initialization parameter of the specific
version of the 64-bit hash MMU in the CPU. So, this patch folds the field
into PPCHash64Options with the other hash MMU options.
This is a bit more complicated that the things previously put in there,
because slb_nr was foolishly included in the migration stream. So we need
some of the usual dance to handle backwards compatible migration.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
These macros were introduced to deal with the fact that the mmu_model
field has bit flags mixed in with what's otherwise an enum of various mmu
types.
We've now eliminated all those flags except for one, and that one -
POWERPC_MMU_64 - is already included/compared in the MMU_VER macros. So,
we can get rid of those macros and just directly compare mmu_model values
in the places it was used.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
The only place we test this flag is in conjunction with
ppc64_use_proc_tbl(). That checks for the LPCR_UPRT bit, which we already
ensure can't be set except on a machine with a v3 MMU (i.e. POWER9).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
The ci_large_pages boolean in CPUPPCState is only relevant to 64-bit hash
MMU machines, indicating whether it's possible to map large (> 4kiB) pages
as cache-inhibitied (i.e. for IO, rather than memory). Fold it as another
flag into the PPCHash64Options structure.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Currently env->mmu_model is a bit of an unholy mess of an enum of distinct
MMU types, with various flag bits as well. This makes which bits of the
field should be compared pretty confusing.
Make a start on cleaning that up by moving two of the flags bits -
POWERPC_MMU_1TSEG and POWERPC_MMU_AMR - which are specific to the 64-bit
hash MMU into a new flags field in PPCHash64Options structure.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Currently some cpus set the hash64_opts field in the class structure, with
specific details of their variant of the 64-bit hash mmu. For the
remaining cpus with that mmu, ppc_hash64_realize() fills in defaults.
But there are only a couple of cpus that use those fallbacks, so just have
them to set the has64_opts field instead, simplifying the logic.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
env->sps contains page size encoding information as an embedded structure.
Since this information is specific to 64-bit hash MMUs, split it out into
a separately allocated structure, to reduce the basic env size for other
cpus. Along the way we make a few other cleanups:
* Rename to PPCHash64Options which is more in line with qemu name
conventions, and reflects that we're going to merge some more hash64
mmu specific details in there in future. Also rename its
substructures to match qemu conventions.
* Move structure definitions to the mmu-hash64.[ch] files.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Initialization of the env->sps structure at the end of instance_init is
specific to the 64-bit hash MMU, so move the code into a helper function
in mmu-hash64.c.
We also create a corresponding function to be called at finalize time -
it's empty for now, but we'll need it shortly.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
CPU definitions for cpus with the 64-bit hash MMU can include a table of
available pagesizes. If this isn't supplied ppc_cpu_instance_init() will
fill it in a fallback table based on the POWERPC_MMU_64K bit in mmu_model.
However, it turns out all the cpus which support 64K pages already include
an explicit table of page sizes, so there's no point to the fallback table
including 64k pages.
That removes the only place which tests POWERPC_MMU_64K, so we can remove
it. Which in turn allows some logic to be removed from
kvm_fixup_page_sizes().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
In most cases we prefer to pass a PowerPCCPU rather than the (embedded)
CPUPPCState.
For ppc_hash64_update_{rmls,vrma}() change to take "cpu" instead of "env".
For ppc_hash64_set_{dsi,isi}() remove the redundant "env" parameter.
In theory this makes more work for the functions, but since "cs", "cpu"
and "env" are related by at most constant offsets, the compiler should be
able to optimize out the difference at effectively zero cost.
helper_*() functions are left alone - since they're more closely tied to
the TCG generated code, passing "env" is still the standard there.
While we're there, fix an incorrect indentation.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
The #if isn't necessary, because there's a suitable one inside
ppc_cpu_is_valid(). We've already filtered for suitable cpu models in the
functions that search and register them. So by the time we get to realize
having an invalid one indicates a code error, not a user error, so an
assert() is more appropriate than error_setg().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Because of the various hooks called some variant on "init" - and the rather
greater number that used to exist, I'm always wondering when a function
called simply "*_init" or "*_initfn" will be called.
To make it easier on myself, and maybe others, rename the instance_init
hooks for ppc cpus to *_instance_init(). While we're at it rename the
realize time hooks to *_realize() (from *_realizefn()) which seems to be
the more common current convention.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
There are a couple places (one generic, one target specific) where we need
to get the host page size associated with a particular memory backend. I
have some upcoming code which will add another place which wants this. So,
for convenience, add a helper function to calculate this.
host_memory_backend_pagesize() returns the host pagesize for a given
HostMemoryBackend object.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_mempath_getpagesize() gets the effective (host side) page size for
a block of memory backed by an mmap()ed file on the host. It requires
the mem_path parameter to be non-NULL.
This ends up meaning all the callers need a different case for handling
anonymous memory (for memory-backend-ram or default memory with -mem-path
is not specified).
We can make all those callers a little simpler by having
qemu_mempath_getpagesize() accept NULL, and treat that as the anonymous
memory case.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
According to the Vector/SIMD extension documentation bit 6 that is
currently masked is valid (listed as transient bit) but bits 7 and 8
should be reserved instead. Fix the mask to match this.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The normal gdb definition of the XER registers is only 32 bit,
and that's what the current version of power64-core.xml also
says (seems copied from gdb's). But qemu's idea of the XER register
is target_ulong (in CPUPPCState, ppc_gdb_register_len and
ppc_cpu_gdb_read_register)
That mismatch leads to the following message when attaching
with gdb:
Truncated register 32 in remote 'g' packet
(and following on that qemu stops responding). The simple fix is
to say the truth in the .xml file. But the better fix is to
actually make it 32bit on the wire, as old gdbs don't support
XML files for describing registers. Also the XER state in qemu
doesn't seem to use the high 32 bits, so sending it off to gdb
doesn't seem worthwhile.
Signed-off-by: Michael Matz <matz@suse.de>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
21b786f "PowerPC: Add TS bits into msr_mask" added the transaction states
to msr_mask for recent POWER CPUs to allow correct migration of machines
that are in certain interim transactional memory states.
This was correct, but unfortunately breaks backwards of pseries-2.7 and
earlier machine types which (stupidly) transferred the msr_mask in the
migration stream and failed if it wasn't equal on each end.
This works around the problem by masking out the new MSR bits in the
compatibility code to send the msr_mask on old machine types.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Tested-by: Lukáš Doktor <ldoktor@redhat.com>
ppc_tr_init_disas_context() correctly sets lazy_tlb_flush to true on
certain CPU models. However, it leaves it uninitialized, instead of
setting it to false on all others.
It wasn't caught before now because we didn't have examples in the tests
that exercised this path. However it can now be caught using clang's
undefined behaviour sanitizer and the sam460ex board.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
cpu_init(cpu_model) were replaced by cpu_create(cpu_type) so
no users are left, remove it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc)
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1518000027-274608-6-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
it will be used for providing to cpu name resolving class for
parsing cpu model for system and user emulation code.
Along with change add target to null-machine tests, so
that when switch to CPU_RESOLVING_TYPE happens,
it would ensure that null-machine usecase still works.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu> (m68k)
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc)
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> (tricore)
Message-Id: <1518000027-274608-4-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: Added macro to riscv too]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
tlbsync also needs to check the Guest Translation Shootdown Enable
(GTSE) bit in the Logical Partition Control Register (LPCR) to
determine at which privilege level it is running.
See commit c6fd28fd57 ("target/ppc: Update tlbie to check privilege
level based on GTSE")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
During migration, after MSR bits is synced, cpu_post_load() will use
msr_mask to determine which PPC MSR bits will be applied into the target
side. Hardware Transaction Memory(HTM) has been supported since Power8,
but TS0/TS1 bit was not in msr_mask yet. That will prevent target KVM
from loading TM checkpointed values.
This patch adds TS bits into msr_mask for Power8, so that transactional
application can be migrated across qemu.
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Convert cap-ibs (indirect branch speculation) to a custom spapr-cap
type.
All tristate caps have now been converted to custom spapr-caps, so
remove the remaining support for them.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
[dwg: Don't explicitly list "?"/help option, trust convention]
[dwg: Fold tristate removal into here, to not break bisect]
[dwg: Fix minor style problems]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Check the character and character_mask field when setting
cap_ppc_safe_indirect_branch based on the hypervisor response
to KVM_PPC_GET_CPU_CHAR. Previously the mask field wasn't checked
which was incorrect.
Fixes: 8acc2ae5 (target/ppc/kvm: Add cap_ppc_safe_[cache/bounds_check/indirect_branch])
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is needed before the next patch because the target-dependent kvm stub
uses the existing kvm_openpic_connect_vcpu() declaration, making it impossible
to move the device-specific declarations into the same file without breaking
ppc-linux-user compilation.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As cpu.h is another typically widely included file which doesn't need
full access to the softfloat API we can remove the includes from here
as well. Where they do need types it's typically for float_status and
the rounding modes so we move that to softfloat-types.h as well.
As a result of not having softfloat in every cpu.h call we now need to
add it to various helpers that do need the full softfloat.h
definitions.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[For PPC parts]
Acked-by: David Gibson <david@gibson.dropbear.id.au>
A few changes worth noting:
- Didn't migrate ctx->exception to DISAS_* since the exception field is
in many cases architecturally relevant.
- Moved the cross-page check from the end of translate_insn to tb_start.
- Removed the exit(1) after a TCG temp leak; changed the fprintf there to
qemu_log.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A couple of notes:
- removed ctx->nip in favour of base->pc_next. Yes, it is annoying,
but didn't want to waste its 4 bytes.
- ctx->singlestep_enabled does a lot more than
base.singlestep_enabled; this confused me at first.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-17-armbru@redhat.com>
The macro expansions of qdict_put_TYPE() and qlist_append_TYPE() need
qbool.h, qnull.h, qnum.h and qstring.h to compile. We include qnull.h
and qnum.h in the headers, but not qbool.h and qstring.h. Works,
because we include those wherever the macros get used.
Open-coding these helpers is of dubious value. Turn them into
functions and drop the includes from the headers.
This cleanup makes the number of objects depending on qapi/qmp/qnum.h
from 4551 (out of 4743) to 46 in my "build everything" tree. For
qapi/qmp/qnull.h, the number drops from 4552 to 21.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-10-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
In order to enable TCE operations support in KVM, we have to inform
the KVM about VFIO groups being attached to specific LIOBNs;
the necessary bits are implemented already by IOMMU MR and VFIO.
This defines get_attr() for the SPAPR TCE IOMMU MR which makes VFIO
call the KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE ioctl and establish
LIOBN-to-IOMMU link.
This changes spapr_tce_set_need_vfio() to avoid TCE table reallocation
if the kernel supports the TCE acceleration.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
[aw - remove unnecessary sys/ioctl.h include]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add three new kvm capabilities used to represent the level of host support
for three corresponding workarounds.
Host support for each of the capabilities is queried through the
new ioctl KVM_PPC_GET_CPU_CHAR which returns four uint64 quantities. The
first two, character and behaviour, represent the available
characteristics of the cpu and the behaviour of the cpu respectively.
The second two, c_mask and b_mask, represent the mask of known bits for
the character and beheviour dwords respectively.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[dwg: Correct some compile errors due to name change in final kernel
patch version]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The MC68040 MMU provides the size of the access that
triggers the page fault.
This size is set in the Special Status Word which
is written in the stack frame of the access fault
exception.
So we need the size in m68k_cpu_unassigned_access() and
m68k_cpu_handle_mmu_fault().
To be able to do that, this patch modifies the prototype of
handle_mmu_fault handler, tlb_fill() and probe_write().
do_unassigned_access() already includes a size parameter.
This patch also updates handle_mmu_fault handlers and
tlb_fill() of all targets (only parameter, no code change).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-2-laurent@vivier.eu>
The hypervisor doorbells are used by skiboot and Linux on POWER9
processors to wake up secondaries.
This adds processor control support to the Server architecture by
reusing the Embedded support. They are very similar, only the bits
definition of the CPU identifier differ.
Still to be done is message broadcast to all threads of the same
processor.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We know that only one bit (in addition to SO) is going to be set in
the condition register, so do two movconds instead of three setconds,
three shifts and two ORs.
For ppc64-linux-user, the code size reduction is around 5% and the
performance improvement slightly less than 10%. For softmmu, the
improvement is around 5%.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
commit f03a1af581 ("ppc: Fix POWER7 and POWER8 exception definitions")
introduced definitions for the server doorbell exceptions by reusing
the embedded definitions but this adds complexity in the powerpc_excp()
routine. Let's introduce specific definitions for the Server doorbells
exception.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When overwritting a valid TLB entry with a new one, the previous page
were not flushed in QEMU TLB, leading to incoherent mapping. This commit
fixes this.
Signed-off-by: Luc MICHEL <luc.michel@git.antfield.fr>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We recently had some discussions that were sidetracked for a while, because
nearly everyone misapprehended the purpose of the 'max_threads' field in
the compatiblity modes table. It's all about guest expectations, not host
expectations or support (that's handled elsewhere).
In an attempt to avoid a repeat of that confusion, rename the field to
'max_vthreads' and add an explanatory comment.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Increases the max smt mode to 8 for Power9. That's because KVM supports
smt emulation in this platform so QEMU should allow users to use it as
well.
Today if we try to pass -smp ...,threads=8, QEMU will silently truncate
it to smt4 mode and may cause a crash if we try to perform a cpu
hotplug.
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
[dwg: Added an explanatory comment]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When constructing the "host" cpu class we modify whether the VMX and VSX
vector extensions and DFP (Decimal Floating Point) are available
based on whether KVM can support those instructions. This can depend on
policy in the host kernel as well as on the actual host cpu capabilities.
However, the way we probe for this is not very nice: we explicitly check
the host's device tree. That works in practice, but it's not really
correct, since the device tree is a property of the host kernel's platform
which we don't really know about. We get away with it because the only
modern POWER platforms happen to encode VMX, VSX and DFP availability in
the device tree in the same way.
Arguably we should have an explicit KVM capability for this, but we haven't
needed one so far. Barring specific KVM policies which don't yet exist,
each of these instruction classes will be available in the guest if and
only if they're available in the qemu userspace process. We can determine
that from the ELF AUX vector we're supplied with.
Once reworked like this, there are no more callers for kvmppc_get_vmx() and
kvmppc_get_dfp() so remove them.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
As stated in the 1ad9f0a464 commit log, the returned entries are not
a whole PTEG. It was not a problem before 1ad9f0a464 as it would read
a single record assuming it contains a whole PTEG but now the code tries
reading the entire PTEG and "if ((n - i) < invalid)" produces negative
values which then are converted to size_t for memset() and that throws
seg fault.
This fixes the math.
While here, fix the last @i increment as well.
Fixes: 1ad9f0a464 "target/ppc: Fix KVM-HV HPTE accessors"
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Also introduce utilities to manipulate bitmasks (originaly from OPAL)
which be will be used in the model of the XIVE interrupt controller.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These are now trivial sets and tests against NULL. Unwrap.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
applied using ./scripts/clean-includes
not needed since 7ebaf79556
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
and use them in a couple of obvious places. Other macros will be used
in the model of the XIVE interrupt controller.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When a CPU is stopped with the 'stop-self' RTAS call, its state
'halted' is switched to 1 and, in this case, the MSR is not taken into
account anymore in the cpu_has_work() routine. Only the pending
hardware interrupts are checked with their LPCR:PECE* enablement bit.
If the DECR timer fires after 'stop-self' is called and before the CPU
'stop' state is reached, the nearly-dead CPU will have some work to do
and the guest will crash. This case happens very frequently with the
not yet upstream P9 XIVE exploitation mode. In XICS mode, the DECR is
occasionally fired but after 'stop' state, so no work is to be done
and the guest survives.
I suspect there is a race between the QEMU mainloop triggering the
timers and the TCG CPU thread but I could not quite identify the root
cause. To be safe, let's disable in the LPCR all the exceptions which
can cause an exit while the CPU is in power-saving mode and reenable
them when the CPU is started.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
and use the value to define precisely the default value of the LPCR in
the helper routine cpu_ppc_set_papr()
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Occasionally in Linux guests on x86_64 we're seeing logs like:
ppc_set_irq: 0x55b4e0d562f0 n_IRQ 8 level 1 => pending 00000100req 00000004
when they should read:
ppc_set_irq: 0x55b4e0d562f0 n_IRQ 8 level 1 => pending 00000100req 00000002
The "00000004" is CPU_INTERRUPT_EXITTB yet the code calls
cpu_interrupt(cs, CPU_INTERRUPT_HARD) ("00000002") in this function
just before the log message. Something is causing the HARD bit setting
to get lost.
The knock on effect of losing that bit is the decrementer timer interrupts
don't get delivered which causes the guest to sit idle in its idle handler
and 'hang'.
The issue occurs due to races from code which sets CPU_INTERRUPT_EXITTB.
Rather than poking directly into cs->interrupt_request, that code needs to:
a) hold BQL
b) use the cpu_interrupt() helper
This patch fixes the call sites to do this, fixing the hang. The calls
are made from a variety of contexts so a helper function is added to handle
the necessary locking. This can likely be improved and optimised in the future
but it ensures the code is correct and doesn't lockup as it stands today.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The msr invalidation code (commits 993eb and 2360b) inverts all
bits except MSR_TGPR and MSR_HVB. On non PowerPC 601 processors
this leads to incorrect change of excp_prefix in hreg_store_msr()
function. The problem is that new msr value get multiplied by msr_mask
and inverted msr does not, thus values of MSR_EP bit in new msr value
and inverted msr are distinct, so that excp_prefix changes but should
not.
Signed-off-by: Kurban Mallachiev <mallachiev@ispras.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
cpu->compat_pvr is used to store the current compat mode of the cpu.
On the receiving side during incoming migration we check compatibility
with the compat mode by calling ppc_set_compat(). However we fail to set
the compat mode with the hypervisor since the "new" compat mode doesn't
differ from the current (due to a "cpu->compat_pvr != compat_pvr" check).
This means that kvm runs the vcpus without a compat mode, which is the
incorrect behaviour. The implication being that a compatibility mode
will never be in effect after migration.
To fix this so that the compat mode is correctly set with the
hypervisor, store the desired compat mode and reset cpu->compat_pvr to
zero before calling ppc_set_compat().
Fixes: 5dfaa532 ("ppc: fix ppc_set_compat() with KVM PR")
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Migration of a system under stress (for example, with
"stress-ng --numa 2") triggers on the destination
some kernel watchdog messages like:
NMI watchdog: BUG: soft lockup - CPU#0 stuck for 3489660870s!
NMI watchdog: BUG: soft lockup - CPU#1 stuck for 3489660884s!
This problem appears with the changes introduced by
42043e4 spapr: clock should count only if vm is running
I think this commit only triggers the problem.
Kernel computes the soft lockup duration using the
Virtual Timebase register (VTB), not using the Timebase
Register (TBR, the one 42043e4 stops).
It appears VTB is not migrated, so this patch adds it in
the list of the SPRs to migrate, and fixes the problem.
For the migration, I've tested a migration from qemu-2.8.0 and
pseries-2.8.0 to a patched master (qemu-2.11.0-rc1). The received
VTB is 0 (as is it not initialized by qemu-2.8.0), but the value
seems to be ignored by KVM and a non zero VTB is used by the kernel.
I have no explanation for that, but as the original problem appears
only with SMP system under stress I suspect some problems in KVM
(I think because VTB is shared by all threads of a core).
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
While trying to make KVM PR usable again, commit 5dfaa532ae introduced a
regression: the current compat_pvr value is passed to KVM instead of the
new one. This means that we always pass 0 instead of the max-cpu-compat
PVR during the initial machine reset. And at CAS time, we either pass
the PVR from the command line or even don't call kvmppc_set_compat() at
all, ie, the PCR will not be set as expected.
For example if we start a big endian fedora26 guest in power7 compat
mode on a POWER8 host, we get this in the guest:
$ cat /proc/cpuinfo
processor : 0
cpu : POWER7 (architected), altivec supported
clock : 4024.000000MHz
revision : 2.0 (pvr 004d 0200)
timebase : 512000000
platform : pSeries
model : IBM pSeries (emulated by qemu)
machine : CHRP IBM pSeries (emulated by qemu)
MMU : Hash
but the guest can still execute POWER8 instructions, and the following
program succeeds:
int main()
{
asm("vncipher 0,0,0"); // ISA 2.07 instruction
}
Let's pass the new compat_pvr to kvmppc_set_compat() and the program fails
with SIGILL as expected.
Reported-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that every target is using the disas_set_info hook,
the flags argument is unused. Remove it.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is identical for each target. So, move the initialization to
common code. Move the variable itself out of tcg_ctx and name it
cpu_env to minimize changes within targets.
This also means we can remove tcg_global_reg_new_{ptr,i32,i64},
since there are no longer global-register temps created by targets.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Groundwork for supporting multiple TCG contexts.
The core of this patch is this change to tcg/tcg.h:
> -extern TCGContext tcg_ctx;
> +extern TCGContext tcg_init_ctx;
> +extern TCGContext *tcg_ctx;
Note that for now we set *tcg_ctx to whatever TCGContext is passed
to tcg_context_init -- in this case &tcg_init_ctx.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert all existing readers of tb->cflags to tb_cflags, so that we
use atomic_read and therefore avoid undefined behaviour in C11.
Note that the remaining setters/getters of the field are protected
by tb_lock, and therefore do not need conversion.
Luckily all readers access the field via 'tb->cflags' (so no foo.cflags,
bar->cflags in the code base), which makes the conversion easily
scriptable:
FILES=$(git grep 'tb->cflags' target include/exec/gen-icount.h \
accel/tcg/translator.c | cut -f1 -d':' | sort | uniq)
perl -pi -e 's/([^.>])tb->cflags/$1tb_cflags(tb)/g' $FILES
perl -pi -e 's/([a-z->.]*)(->|\.)tb->cflags/tb_cflags($1$2tb)/g' $FILES
Then manually fixed the few errors that checkpatch reported.
Compile-tested for all targets.
Suggested-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move target cpu tcg initialization to common code,
called from cpu_exec_realizefn.
Acked-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When we used structures for TCGv_*, we needed a macro in order to
perform a comparison. Now that we use pointers, this is just clutter.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
use generic cpu_model parsing introduced by
(6063d4c0f vl.c: convert cpu_model to cpu type and set of global properties before machine_init())
it allows to:
* replace sPAPRMachineClass::tcg_default_cpu with
MachineClass::default_cpu_type
* drop cpu_parse_cpu_model() from hw/ppc/spapr.c and reuse
one in vl.c
* simplify spapr_get_cpu_core_type() by removing
not needed anymore recurrsion since alias look up
happens earlier at vl.c and spapr_get_cpu_core_type()
works only with resulted from that cpu type.
* spapr no more needs to parse/depend on being phased out
MachineState::cpu_model, all tha parsing done by generic
code and target specific callback.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
[dwg: Correct minor compile error]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
next commit will drop ppc_cpu_lookup_alias() declaration from header
and make it static which will break its last user ppc_cpu_class_by_name()
since ppc_cpu_class_by_name() defined before ppc_cpu_lookup_alias().
To avoid this move ppc_cpu_lookup_alias() right before
ppc_cpu_class_by_name().
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
consolidate 'host' core type registration by moving it from
KVM specific code into spapr_cpu_core.c, similar like it's
done in x86 target.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
replace sPAPRCPUCoreClass::cpu_class with cpu type name
since it were needed just to get that at points it were
accessed.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
there is a dedicated callback CPUClass::parse_features
which purpose is to convert -cpu features into a set of
global properties AND deal with compat/legacy features
that couldn't be directly translated into CPU's properties.
Create ppc variant of it (ppc_cpu_parse_featurestr) and
move 'compat=val' handling from spapr_cpu_core.c into it.
That removes a dependency of board/core code on cpu_model
parsing and would let to reuse common -cpu parsing
introduced by 6063d4c0
Set "max-cpu-compat" property only if it exists, in practice
it should limit 'compat' hack to spapr machine and allow
to avoid including machine/spapr headers in target/ppc/cpu.c
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For POWER ISA v3.0, the XER bit CA32 needs to be set by the shift
right algebraic instructions whenever the CA bit is to be set. This
change affects the following instructions:
* Shift Right Algebraic Word (sraw[.])
* Shift Right Algebraic Word Immediate (srawi[.])
* Shift Right Algebraic Doubleword (srad[.])
* Shift Right Algebraic Doubleword Immediate (sradi[.])
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At the moment the only POWER9 model which is listed in qemu is v1.0 (aka
"DD1"). This is a very early (read, buggy) version which will never be
released to the public - it was included in qemu only for the convenience
of those doing bringup on the early silicon. For bonus points, we actually
had its PVR incorrect in the table (0x004e0000 instead of 0x004e0100). We
also never actually implemented the differences in behaviour (read, bugs)
that marked DD1 in qemu.
Now that we know the PVR for the substantially better v2.0 (DD2) chip,
include it and make it the default POWER9 in qemu. For the time being we
leave the DD1 definition in place for the poor souls (read, me) who still
need to work with DD1 hardware.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We don't have any 460 or 460F CPUs in QEMU, so the init functions
are just dead code. Let's simply remove them (translate_init.c
is already big enough without them).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It is used by all PPC targets; we can give the directory its own
Makefile.objs file, and include it directly from target/ppc.
target/s390 can do the same when it starts using it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=/+LV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20170927a' into staging
Migration pull 2017-09-27
# gpg: Signature made Wed 27 Sep 2017 14:56:23 BST
# gpg: using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20170927a:
migration: Route more error paths
migration: Route errors up through vmstate_save
migration: wire vmstate_save_state errors up to vmstate_subsection_save
migration: Check field save returns
migration: check pre_save return in vmstate_save_state
migration: pre_save return int
migration: disable auto-converge during bulk block migration
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.
Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.
Note: If you add an error exit in your pre_save you must emit
an error_report to say why.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When running with KVM PR, if a new HPT is allocated we need to inform
KVM about the HPT address and size. This is currently done by hacking
the value of SDR1 and pushing it to KVM in several places.
Also, migration breaks the guest since it is very unlikely the HPT has
the same address in source and destination, but we push the incoming
value of SDR1 to KVM anyway.
This patch introduces a new virtual hypervisor hook so that the spapr
code can provide the correct value of SDR1 to be pushed to KVM each
time kvmppc_put_books_sregs() is called.
It allows to get rid of all the hacking in the spapr/kvmppc code and
it fixes migration of nested KVM PR.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Remove *all* unused CPU definitions as indicated by compile-time
`#if 0` constructs.
Signed-off-by: John Snow <jsnow@redhat.com>
[dwg: Removed some additional now-useless comments]
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Following commit aef77960, remove now-unused definitions from
cpu-models.h.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The use of KVM_PPC_GET_HTAB_FD is open-coded in kvmppc_read_hptes()
and kvmppc_write_hpte().
This patch modifies kvmppc_get_htab_fd() so that it can be used
everywhere we need to access the in-kernel htab:
- add an index argument
=> only kvmppc_read_hptes() passes an actual index, all other users
pass 0
- add an errp argument to propagate error messages to the caller.
=> spapr migration code prints the error
=> hpte helpers pass &error_abort to keep the current behavior
of hw_error()
While here, this also fixes a bug in kvmppc_write_hpte() so that it
opens the htab fd for writing instead of reading as it currently does.
This never broke anything because we currently never call this code,
as explained in the changelog of commit c1385933804bb:
"This support updating htab managed by the hypervisor. Currently
we don't have any user for this feature. This actually bring the
store_hpte interface in-line with the load_hpte one. We may want
to use this when we want to emulate henter hcall in qemu for HV
kvm."
The above is still true today.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When kvmppc_get_htab_fd() fails, its return value is propagated up to
qemu_savevm_state_iterate() or to qemu_savevm_state_complete_precopy().
All savevm handlers expect to receive a negative errno on error.
Let's patch kvmppc_get_htab_fd() accordingly.
While here, let's change htab_load() in the spapr code to also
propagate the error, since it doesn't make sense to abort() if
we couldn't get the htab fd from KVM.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Despite its name it is a 440 core CPU
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It never got used since its introduction (commit 7c43bca004).
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The following capabilities are VM specific:
- KVM_CAP_PPC_SMT_POSSIBLE
- KVM_CAP_PPC_HTAB_FD
- KVM_CAP_PPC_ALLOC_HTAB
If both KVM HV and KVM PR are present, checking them always return
the HV value, even if we explicitely requested to use PR.
This has no visible effect for KVM_CAP_PPC_ALLOC_HTAB, because we also
try the KVM_PPC_ALLOCATE_HTAB ioctl which is only suppored by HV. As
a consequence, the spapr code doesn't even check KVM_CAP_PPC_HTAB_FD.
However, this will cause kvmppc_hint_smt_possible(), introduced by
commit fa98fbfcdf, to report several VSMT modes (eg, Available
VSMT modes: 8 4 2 1) whereas PR only support mode 1.
This patch fixes all three anyway to use kvm_vm_check_extension(). It
is okay since the VM is already created at the time kvm_arch_init() or
kvmppc_reset_htab() is called.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
All but a handful of files include exec/cpu-all.h via cpu.h only.
As these files already include cpu.h, let's just drop the additional
include.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Tidy up some of the warn_report() messages after having converted them
to use warn_report().
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <9cb1d23551898c9c9a5f84da6773e99871285120.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all the multi-line uses of fprintf(stderr, "warning:"..."\n"...
to use warn_report() instead. This helps standardise on a single
method of printing warnings to the user.
All of the warnings were changed using these commands:
find ./* -type f -exec sed -i \
'N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
Indentation fixed up manually afterwards.
Some of the lines were manually edited to reduce the line length to below
80 charecters. Some of the lines with newlines in the middle of the
string were also manually edit to avoid checkpatch errrors.
The #include lines were manually updated to allow the code to compile.
Several of the warning messages can be improved after this patch, to
keep this patch mechanical this has been moved into a later patch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Jason Wang <jasowang@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <5def63849ca8f551630c6f2b45bcb1c482f765a6.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the host has both KVM PR and KVM HV loaded and we pass:
-machine pseries,accel=kvm,kvm-type=PR
the kvmppc_is_pr() returns false instead of true. Since the helper
is mostly used as fallback, it doesn't have any real impact with
recent kernels. A notable exception is the workaround to allow
migration between compatible hosts with different PVRs (eg, POWER8
and POWER8E), since KVM still doesn't provide a way to check if a
specific PVR is supported (see commit c363a37a45 for details).
According to the official KVM API documentation [1], KVM_PPC_GET_PVINFO
is "vm ioctl", but we check it as a global ioctl. The following function
in KVM is hence called with kvm == NULL and considers we're in HV mode.
int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
{
int r;
/* Assume we're using HV mode when the HV module is loaded */
int hv_enabled = kvmppc_hv_ops ? 1 : 0;
if (kvm) {
/*
* Hooray - we know which VM type we're running on. Depend on
* that rather than the guess above.
*/
hv_enabled = is_kvmppc_hv_enabled(kvm);
}
Let's use kvm_vm_check_extension() to fix the issue.
[1] https://www.kernel.org/doc/Documentation/virtual/kvm/api.txt
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Running QEMU with
qemu-system-ppc64 -M none -nographic -m 256
and executing
dump-guest-memory /dev/null 0 8192
results in segfault
Fix by checking if we have CPU, and exit with
error if there is no CPU:
(qemu) dump-guest-memory /dev/null
this feature or command is not currently supported
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20170913142036.2469-2-lvivier@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Move the calculation of a CPU's VCPU ID out of the generic PPC code
(ppc_cpu_realizefn()) and into sPAPR specific code
(spapr_cpu_core_realize()) where it belongs.
Unfortunately, due to the way things are ordered, we still need to
default the VCPU ID in ppc_cpu_realizfn() but at least doing that
doesn't require any interaction with sPAPR.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Remove cpu models that aren't implemented and are not
compiled/tested since they are under TODO ifdef
which isn't defined in sources.
If someone really needs a removed model he/she should add
as regular one with corresponding implementation.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Caching there practically doesn't give any benefits
and that at slow path druring querying supported CPU list.
But it introduces non conventional path of where from
comes used CPU type name (kvm_ppc_register_host_cpu_type).
Taking in account that kvm_ppc_register_host_cpu_type()
fixes up models the aliases point to, it's sufficient to
make ppc_cpu_class_by_name() translate cpu alias to
correct cpu type name.
So drop PowerPCCPUAlias::oc field + ppc_cpu_class_by_alias()
and let ppc_cpu_class_by_name() do conversion to cpu type name,
which simplifies code a little bit saving ~20LOC and trouble
wondering why ppc_cpu_class_by_alias() is necessary.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
previous patches cleaned up cpu model/alias naming which
allows to simplify cpu model/alias to cpu type lookup a bit
byt removing recurssion and dependency of ppc_cpu_class_by_name() /
ppc_cpu_class_by_alias() on each other.
Besides of simplifying code it reduces it by ~15LOC.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
alias pointing to another alias forces lookup code to
do recurrsive translation till real cpu model is reached.
Drop this nonsence and make each alias point to cpu model
that has corresponding CPU type. It will allow to drop
recurrsion in cpu model translation code and actually
make ppc_cpu_aliases[] content use PowerPCCPUAlias
fields properly
(i.e. alias goes into .alias and model goes into .model)
While at it add TODO defines around aliases that point to
cpu models excluded by the same TODO defines.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
PPC handles -cpu FOO rather incosistently,
i.e. it does case-insensitive matching of FOO to
a CPU type (see: ppc_cpu_compare_class_name) but
handles alias names as case-sensitive, as result:
# qemu-system-ppc64 -M mac99 -cpu g3
qemu-system-ppc64: unable to find CPU model ' kN�U'
# qemu-system-ppc64 -cpu 970MP_V1.1
qemu-system-ppc64: Unable to find sPAPR CPU Core definition
while
# qemu-system-ppc64 -M mac99 -cpu G3
# qemu-system-ppc64 -cpu 970MP_v1.1
start up just fine.
Considering we can't take case-insensitive matching away,
make it case-insensitive for all alias/type/core_type
lookups.
As side effect it allows to remove duplicate core types
which are the same except of using different cased letters in name.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Replace
"-" TYPE_POWERPC_CPU
when composing cpu type name from cpu model string literal
and the same pattern in format strings with
POWERPC_CPU_TYPE_SUFFIX and POWERPC_CPU_TYPE_NAME(model)
macroses like we do in x86.
Later POWERPC_CPU_TYPE_NAME() will be used to define default
cpu type per machine type and as bonus it will be consistent
and easy grep-able pattern across all other targets that I'm
plannig to treat the same way.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The target/ppc/STATUS file has seen its last real update 10 years
ago - so the information in there is not up to date anymore. Since
nobody seems to care about this file, let's simply remove it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
KVM now allows writing to KVM_CAP_PPC_SMT which has previously been
read only. Doing so causes KVM to act, for that VM, as if the host's
SMT mode was the given value. This is particularly important on Power
9 systems because their default value is 1, but they are able to
support values up to 8.
This patch introduces a way to control this capability via a new
machine property called VSMT ("Virtual SMT"). If the value is not set
on the command line a default is chosen that is, when possible,
compatible with legacy systems.
Note that the intialization of KVM_CAP_PPC_SMT has changed slightly
because it has changed (in KVM) from a global capability to a
VM-specific one. This won't cause a problem on older KVMs because VM
capabilities fall back to global ones.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This allows to init the MMUCFG SPR with a non NULL value.
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Some OS don't populate the TSIZE field when using a fixed size TLB which result
in a 1KB TLB. When the TLB is a fixed size TLB the TSIZE field should be
ignored.
Fix this wrong behavior with MAV 2.0.
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This fixes booke206_tlbnps for MAV 2.0 by checking the MMUCFG register and
return directly the right tlbnps instead of computing it from non existing
field.
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The concept of a VCPU ID that differs from the CPU's index
(cpu->cpu_index) exists only within SPAPR machines so, move the
functions ppc_get_vcpu_id() and ppc_get_cpu_by_vcpu_id() into spapr.c
and rename them appropriately.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This field actually records the VCPU ID used by KVM and, although the
value is also used in the device tree it is primarily the VCPU ID so
rename it as such.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
[dwg: Updated comment missed in cpu.h]
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
it's just a wrapper, drop it and use cpu_generic_init() directly
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1503592308-93913-26-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <rth@twiddle.net>
When running in KVM PR mode, kvmppc_set_compat() always fail because the
current PR implementation doesn't handle KVM_REG_PPC_ARCH_COMPAT. Now that
the machine code inconditionally calls ppc_set_compat_all() at reset time
to restore the compat mode default value (commit 66d5c492dd), it is
impossible to start a guest with PR:
qemu-system-ppc64: Unable to set CPU compatibility mode in KVM:
Invalid argument
A tentative patch [1] was recently sent by Suraj to address the issue, but
it would prevent the compat mode to be turned off on reset. And we really
don't want to explicitely check for KVM PR. During the patch's review,
David suggested that we should only call the KVM ioctl() if the compat
PVR changes. This allows at least to run with KVM PR, provided no compat
mode is requested from the command line (which should be the case when
running PR nested). This is what this patch does.
While here, we also fix the side effect where KVM would fail but we would
change the CPU state in QEMU anyway.
[1] http://patchwork.ozlabs.org/patch/782039/
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit d5fc133eed ("ppc: Rework CPU compatibility testing
across migration") changed the way cpu_post_load behaves with
the PVR setting, causing an unexpected bug in KVM-HV migrations
between hosts that are compatible (POWER8 and POWER8E, for example).
Even with pvr_match() returning true, the guest freezes right after
cpu_post_load. The reason is that the guest kernel can't handle a
different PVR value other that the running host in KVM_SET_SREGS.
In [1] it was discussed the possibility of a new KVM capability
that would indicate that the guest kernel can handle a different
PVR in KVM_SET_SREGS. Even if such feature is implemented, there is
still the problem with older kernels that will not have this capability
and will fail to migrate.
This patch implements a workaround for that scenario. If running
with KVM, check if the guest kernel does not have the capability
(named here as 'cap_ppc_pvr_compat'). If it doesn't, calls
kvmppc_is_pr() to see if the guest is running in KVM-HV. If all this
happens, set env->spr[SPR_PVR] to the same value as the current
host PVR. This ensures that we allow migrations with 'close enough'
PVRs to still work in KVM-HV but also makes the code ready for
this new KVM capability when it is done.
A new function called 'kvmppc_pvr_workaround_required' was created
to encapsulate the conditions said above and to avoid calling too
many kvm.c internals inside cpu_post_load.
[1] https://lists.gnu.org/archive/html/qemu-ppc/2017-06/msg00503.html
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
[dwg: Fix for the case of using TCG on a PPC host]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The PSSCR register added in POWER9 controls certain power saving mode
behaviours. Mostly, it's not relevant to TCG, however because qemu
doesn't know about it yet, it doesn't synchronize the state with KVM,
and thus it doesn't get migrated.
To fix that, this adds a minimal stub implementation of the register.
This isn't complete, even to the extent that an implementation is
possible in TCG, just enough to get migration working. We need to
come back later and at least properly filter the various fields in the
register based on privilege level.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
This adds a trivial implementation of the TIDR register added in
POWER9. This isn't particularly important to qemu directly - it's
used by accelerator modules that we don't emulate.
However, since qemu isn't aware of it, its state is not synchronized
with KVM and therefore not migrated, which can be a problem.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
When running nested with KVM PR, ppc_set_compat() fails and QEMU crashes
because of "double free or corruption (!prev)". The crash happens because
error_report_err() has already called error_free().
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When a tlb instruction miss happen, rw is set to 0 at the bottom
of cpu_ppc_handle_mmu_fault which cause the MAS update function to miss
the SAS and TS bit in MAS6, MAS1 in booke206_update_mas_tlb_miss.
Just calling booke206_update_mas_tlb_miss with rw = 2 solve the issue.
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Make visit_type_null() take an @obj argument like its buddies. This
helps keep the next commit simple.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
On NetBSD, where tolower() and toupper() are implemented using an
array lookup, the compiler warns if you pass a plain 'char'
to these functions:
gdbstub.c:914:13: warning: array subscript has type 'char'
This reflects the fact that toupper() and tolower() give
undefined behaviour if they are passed a value that isn't
a valid 'unsigned char' or EOF.
We have qemu_tolower() and qemu_toupper() to avoid this problem;
use them.
(The use in scsi-generic.c does not trigger the warning because
it passes a uint8_t; we switch it anyway, for consistency.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> for the s390 part.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-id: 1500568290-7966-1-git-send-email-peter.maydell@linaro.org
Needed to implement a target-agnostic gen_intermediate_code()
in the future.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Benneé <alex.benee@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002025498.22386.18051908483085660588.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Done with the Coccinelle semantic patch
scripts/coccinelle/tcg_gen_extract.cocci.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20170718045540.16322-6-f4bug@amsat.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
But when a guest initializes radix mode, it issues a H_REGISTER_PROC_TBL
to update the LPCR of all CPUs. Hot-plugged CPUs inherit from the same
setting under KVM but not under TCG. So, Let's check for radix and update
the default LPCR to keep new CPUs in sync.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
So far, qemu implements the PAPR Hash Page Table (HPT) resizing extension
with TCG. The same implementation will work with KVM PR, but we don't
currently allow that. For KVM HV we can only implement resizing with the
assistance of the host kernel, which needs a new capability and ioctl()s.
This patch adds support for testing the new KVM capability and implementing
the resize in terms of KVM facilities when necessary. If we're running on
a kernel which doesn't have the new capability flag at all, we fall back to
testing for PR vs. HV KVM using the same hack that we already use in a
number of places for older kernels.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch implements hypercalls allowing a PAPR guest to resize its own
hash page table. This will eventually allow for more flexible memory
hotplug.
The implementation is partially asynchronous, handled in a special thread
running the hpt_prepare_thread() function. The state of a pending resize
is stored in SPAPR_MACHINE->pending_hpt.
The H_RESIZE_HPT_PREPARE hypercall will kick off creation of a new HPT, or,
if one is already in progress, monitor it for completion. If there is an
existing HPT resize in progress that doesn't match the size specified in
the call, it will cancel it, replacing it with a new one matching the
given size.
The H_RESIZE_HPT_COMMIT completes transition to a resized HPT, and can only
be called successfully once H_RESIZE_HPT_PREPARE has successfully
completed initialization of a new HPT. The guest must ensure that there
are no concurrent accesses to the existing HPT while this is called (this
effectively means stop_machine() for Linux guests).
For now H_RESIZE_HPT_COMMIT goes through the whole old HPT, rehashing each
HPTE into the new HPT. This can have quite high latency, but it seems to
be of the order of typical migration downtime latencies for HPTs of size
up to ~2GiB (which would be used in a 256GiB guest).
In future we probably want to move more of the rehashing to the "prepare"
phase, by having H_ENTER and other hcalls update both current and
pending HPTs. That's a project for another day, but should be possible
without any changes to the guest interface.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This introduces stub implementations of the H_RESIZE_HPT_PREPARE and
H_RESIZE_HPT_COMMIT hypercalls which we hope to add in a PAPR
extension to allow run time resizing of a guest's hash page table. It
also adds a new machine property for controlling whether this new
facility is available.
For now we only allow resizing with TCG, allowing it with KVM will require
kernel changes as well.
Finally, it adds a new string to the hypertas property in the device
tree, advertising to the guest the availability of the HPT resizing
hypercalls. This is a tentative suggested value, and would need to be
standardized by PAPR before being merged.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
The remaining non-const ones are in e1000e which modifies description at
runtime. They can be addressed separatedly.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170714021509.23681-6-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When running KVM on POWER, we allow the user to pass "-cpu POWERx" instead
of "-cpu host". This is achieved by patching the ppc_cpu_aliases[] array
so that "POWERx" points to the CPU class with the same PVR as the host CPU.
This causes CPUs to be instantiated from this CPU class instead of the
TYPE_HOST_POWERPC_CPU class which is used with "-cpu host". These CPUs thus
miss all the KVM specific tuning from kvmppc_host_cpu_class_init().
This currently causes QEMU with "-cpu POWER9" to fail when running KVM on a
POWER9 DD1 host:
qemu-system-ppc64: Register sync failed... If you're using kvm-hv.ko, only
"-cpu host" is possible
kvm_init_vcpu failed: Invalid argument
Let's have the "POWERx" alias to point to TYPE_HOST_POWERPC_CPU directly,
so that "-cpu POWERx" instantiates CPUs from the same class as "-cpu host".
Signed-off-by: Greg Kurz <groug@kaod.org>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In target/ppc/mmu-hash64.c there already exists the function
ppc_hash64_get_phys_page_debug() to get the physical (real) address for
a given effective address in hash mode.
Implement the function ppc_radix64_get_phys_page_debug() to allow a real
address to be obtained for a given effective address in radix mode.
This is used when a debugger is attached to qemu.
Previously we just had a comment saying this is unimplemented which then
fell through to the default case and caused an abort due to
unrecognised mmu model as the default had no case for the V3 mmu, which
was misleading at best.
We reuse ppc_radix64_walk_tree() which is used by the radix fault
handler since the process of walking the radix tree is identical.
Reported-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The mmu-radix64.c file implements functions to enable the radix mmu
emulation in tcg mode. There is a function ppc_radix64_walk_tree() which
performs the radix tree walk and also implicitly checks the pte
protection.
Move the protection checking of the pte from the ppc_radix64_walk_tree()
function into the caller. This means the ppc_radix64_walk_tree() function
can be used without protection checking which is useful for debugging.
ppc_radix64_walk_tree() no longer needs to take the rwx and prot variables.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Properly set the book E exception syndrome register when a floating
point exception occurs.
Currently on a book E processor, the POWERPC_EXCP_FP exception handler
fails to set "env->spr[SPR_BOOKE_ESR] = ESR_FP;" as required by the
book E specification.
Signed-off-by: Aaron Larson <alarson@ddci.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If ppc_cpu_realizefn() fails after cpu_exec_realizefn() has been
called, we will have to undo whatever cpu_exec_realizefn() did
by explicitly calling cpu_exec_unrealizeffn() which is currently
missing. Failure to do this proper cleanup will result in CPU
which was never fully realized to linger on the cpus list causing
SIGSEGV later (for eg when running "info cpus").
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The mmu fault handler should return 0 if it was able to successfully
handle the fault and a positive value otherwise.
Currently the tcg radix mmu fault handler will return 1 after
successfully handling a fault in virtual mode. This is incorrect
so fix it so that it returns 0 in this case.
The handler already correctly returns 0 when a fault was handled
in real mode and 1 if an interrupt was generated.
Fixes: d5fee0bbe6 ("target/ppc: Implement ISA V3.00 radix page fault handler")
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since the introduction of MTTCG, using the msgsnd instruction
abort()s if being called without holding the BQL. So let's protect
that part of the code now with qemu_mutex_lock_iothread().
Buglink: https://bugs.launchpad.net/qemu/+bug/1694998
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Migrating between different CPU versions is a bit complicated for ppc.
A long time ago, we ensured identical CPU versions at either end by
checking the PVR had the same value. However, this breaks under KVM
HV, because we always have to use the host's PVR - it's not
virtualized. That would mean we couldn't migrate between hosts with
different PVRs, even if the CPUs are close enough to compatible in
practice (sometimes identical cores with different surrounding logic
have different PVRs, so this happens in practice quite often).
So, we removed the PVR check, but instead checked that several flags
indicating supported instructions matched. This turns out to be a bad
idea, because those instruction masks are not architected information, but
essentially a TCG implementation detail. So changes to qemu internal CPU
modelling can break migration - this happened between qemu-2.6 and
qemu-2.7. That was addressed by 146c11f1 "target-ppc: Allow eventual
removal of old migration mistakes".
Now, verification of CPU compatibility across a migration basically doesn't
happen. We simply ignore the PVR of the incoming migration, and hope the
cpu on the destination is close enough to work.
Now that we've cleaned up handling of processor compatibility modes
for pseries machine type, we can do better. For new machine types
(pseries-2.10+) We allow migration if:
* The source and destination PVRs are for the same type of CPU, as
determined by CPU class's pvr_match function
OR * When the source was in a compatibility mode, and the destination CPU
supports the same compatibility mode
For older machine types we retain the existing behaviour - current CAS
code will usually set a compat mode which would break backwards
migration if we made them use the new behaviour. [Fixed from an
earlier version by Greg Kurz].
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Server class POWER CPUs have a "compat" property, which is used to set the
backwards compatibility mode for the processor. However, this only makes
sense for machine types which don't give the guest access to hypervisor
privilege - otherwise the compatibility level is under the guest's control.
To reflect this, this removes the CPU 'compat' property and instead
creates a 'max-cpu-compat' property on the pseries machine. Strictly
speaking this breaks compatibility, but AFAIK the 'compat' option was
never (directly) used with -device or device_add.
The option was used with -cpu. So, to maintain compatibility, this
patch adds a hack to the cpu option parsing to strip out any compat
options supplied with -cpu and set them on the machine property
instead of the now deprecated cpu property.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Tested-by: Andrea Bolognani <abologna@redhat.com>
In some cases a failing VMSTATE_*_EQUAL does not mean we detected a bug,
but it's actually the best we can do. Especially in these cases a verbose
error message is required.
Let's introduce infrastructure for specifying a error hint to be used if
equal check fails. Let's do this by adding a parameter to the _EQUAL
macros called _err_hint. Also change all current users to pass NULL as
last parameter so nothing changes for them.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170623144823.42936-1-pasic@linux.vnet.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The string returned by object_property_get_str() is dynamically allocated.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This function has three implementations. Two are stubs that do nothing
and the third one only passes the obj_path argument to:
Object *object_resolve_path(const char *path, bool *ambiguous);
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Move vcpu's associated numa_node field out of generic CPUState
into inherited classes that actually care about cpu<->numa mapping,
i.e: ARMCPU, PowerPCCPU, X86CPU.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1496161442-96665-6-git-send-email-imammedo@redhat.com>
[ehabkost: s/CPU is belonging to/CPU belongs to/ on comments]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
For transitioning back to userspace after the interrupt.
Suggested-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When running with KVM, we update the "family" CPU alias to point
to the right host CPU type, so that it for example possible to
use "-cpu POWER8" on a POWER8NVL host. However, the function for
printing the list of available CPU models is called earlier than
the KVM setup code, so the output of "-cpu help" is wrong in that
case. Since it would be somewhat ugly anyway to have different
help texts depending on whether "-enable-kvm" has been specified
or not, we should better always print the same text, so fix this
issue by printing "alias for preferred XXX CPU" instead.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
POWER9 DD1 silicon has some bugs which mean it a) isn't really compliant
with the ISA v3.00 and b) require a number of special workarounds in the
kernel.
At the moment, qemu isn't aware of DD1. For TCG we don't really want it to
be (why bother emulating buggy silicon). But with KVM, the guest does need
to be aware of DD1 so it can apply the necessary workarounds.
Meanwhile, the feature negotiation between qemu and the guest strongly
favours architected compatibility modes to "raw" CPU modes. In combination
with the above, this means the guest sees architected POWER9 mode, and
doesn't apply the DD1 workarounds. Well, unless it has yet another
workaround to partially ignore what qemu tells it.
This patch addresses this by disabling support for compatibility modes when
using KVM on a POWER9 DD1 host.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ISA V3.00 introduced a new radix mmu model. Implement the page fault
handler for this so we can run a tcg guest in radix mode and perform
address translation correctly.
In real mode (mmu turned off) addresses are masked to remove the top
4 bits and then are subject to partition scoped translation, since we only
support pseries at this stage it is only necessary to perform the masking
and then we're done.
In virtual mode (mmu turned on) address translation if performed as
follows:
1. Use the quadrant to determine the fully qualified address.
The fully qualified address is defined as the combination of the effective
address, the effective logical partition id (LPID) and the effective
process id (PID). Based on the quadrant (EA63:62) we set the pid and lpid
like so:
quadrant 0: lpid = LPIDR, pid = PIDR
quadrant 1: HV only (not allowed in pseries)
quadrant 2: HV only (not allowed in pseries)
quadrant 3: lpid = LPIDR, pid = 0
If we can't get the fully qualified address we raise a segment interrupt.
2. Find the guest radix tree
We ask the virtual hypervisor for the partition table which was registered
with H_REGISTER_PROC_TBL which points us to the process table in guest
memory. We then index this table by pid to get the process table entry
which points us to the appropriate radix tree to translate the address.
If the process table isn't big enough to contain an entry for the current
pid then we raise a storage interrupt.
3. Walk the radix tree
Next we walk the radix tree where each level is a table of page directory
entries indexed by some number of bits from the effective address, where
the number of bits is determined by the table size. We continue to walk
the tree (while entries are valid and the table is of minimum size) until
we reach a table of page table entries, indicated by having the leaf bit
set. The appropriate pte is then checked for sufficient access permissions,
the reference and change bits are updated and the real address is
calculated from the real page number bits of the pte and the low bits of
the effective address.
If we can't find an entry or can't access the entry bacause of permissions
then we raise a storage interrupt.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
[dwg: Add missing parentheses to macro]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The tlbie[l] instructions are used to invalidate TLB entries used to cache
address translations.
In ISAv3.00 (POWER9) more fields were added to the tblie[l] instructions
which were previously invalid. We don't care about any of these new fields
since we just invalidate the whole world anyway but we need to not
cause an illegal instruction exception when the instructions are called.
We also don't want to allow an older processor to have these fields set
since that would be invalid.
Add a new GEN_HANDLER for the ISAv3 instructions with the correct invalid
mask. These will only be generated to a POWER9 processor for now based on
the instruction flag. Also remove the PPC_MEM_TLBIE instruction flag from
the POWER9 processor definition to ensure the old tlbie isn't generated.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The Guest Translation Shootdown Enable (GTSE) bit in the Logical Partition
Control Register (LPCR) can be set to enable a guest to use the tlbie
instruction directly to invalidate translations.
When the GTSE bit is set then the tlbie instruction is supervisor
privileged, otherwise it is hypervisor privileged.
Add a guest translation shootdown enable (gtse) field to the diassembly
context and use this to check the correct privilege level at code
generation time.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
David Gibson
Cédric Le Goater
BALATON Zoltan
Michael Matz
Igor Mammedov
Simon Guo
Suraj Jitindar Singh
Mark Cave-Ayland
Alex Bennée
Emilio G. Cota
Markus Armbruster
Peter Maydell
Alexey Kardashevskiy
Philippe Mathieu-Daudé
Laurent Vivier
pbonzini@redhat.com
Luc MICHEL
Jose Ricardo Ziviani
Richard Henderson
Richard Henderson
Richard Purdie
Kurban Mallachiev
Laurent Vivier
Greg Kurz
Sandipan Das
Thomas Huth
Dr. David Alan Gilbert
John Snow
David Hildenbrand
Alistair Francis
Sam Bobroff
KONRAD Frederic
Marc-André Lureau
Daniel Henrique Barboza
Lluís Vilanova
Fam Zheng
Aaron Larson
Bharata B Rao
Halil Pasic
Nikunj A Dadhania