Add asc 0x3a, ascq 0: Medium not present to NOT READY sense
(needed to keep some guests from retrying causing long sleeps in the
kernel)
Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6953 c046a42c-6fe2-441c-8c8c-71466251a162
Recent patches added two compiler warnings about the format string
usage in qcow_read_extensions. One is printing a uint64_t using
%lu which is incorrect on many platforms as it can be a unsigned
long long, the second one is printing the result of sizeof as
%lu, but it is a size_t so it needs to be printed using %zu.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6944 c046a42c-6fe2-441c-8c8c-71466251a162
All the bdrv_ helpers should check for bs->drv being zero as that means
there is no backend image open. bdrv_flush fails to perform that check
and can thus cause NULL pointer dereferences.
Found using qemu-io.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6943 c046a42c-6fe2-441c-8c8c-71466251a162
Remove code dealing with negative sector numbers for byte access in
bdrv_check_request as sector numbers can't ever be negative.
Previously we supported negative sector counts for byte access, but
never sector numbers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6942 c046a42c-6fe2-441c-8c8c-71466251a162
While searching PC, always store the pc of a new instruction.
Instructions that didn't generate tcg code (such as nop) prevented the
next one to be referenced.
Based on patch for target-alpha, r6930.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6931 c046a42c-6fe2-441c-8c8c-71466251a162
While searching PC, always store the pc of a new instruction.
Instructions that didn't generate tcg code (such as nop) prevented the next
one to be referenced.
Signed-off-by: Tristan Gingold <gingold@adacore.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6930 c046a42c-6fe2-441c-8c8c-71466251a162
No need to stop translation after hw_st.
Signed-off-by: Tristan Gingold <gingold@adacore.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6925 c046a42c-6fe2-441c-8c8c-71466251a162
Thanks to Stuart Brady for the notice.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6920 c046a42c-6fe2-441c-8c8c-71466251a162
In the head of eeprom93xx.c we promise to support chips with 256 words,
but store the size in an unsigned byte. This patch replaces this with an
16 bit variable and changes the load/store code accordingly (introducing a
new version).
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6918 c046a42c-6fe2-441c-8c8c-71466251a162
The EEPROM 93xx device used to dump a C structure to the migration stream.
This structure includes mixed 8 and 16bit variables and is thus subject to
compiler dependent padding. Replace this with discrete dumps of each member
(and add a padding byte to ensure compatibility, a version update is
included in the following patch).
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6917 c046a42c-6fe2-441c-8c8c-71466251a162
Add linux kernel command line ("--append" option) support.
Fix kernel loading address to appropriate position when --append used.
Using --kernel but --append case is left untouched for backward compatibility.
This also change the host<->SH address mapping for r2d to
host addr == phys_ram_base + SH addr.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6916 c046a42c-6fe2-441c-8c8c-71466251a162
TCG does not allow the same memory location to be aliased in two
different global registers, fpu_fpr32 and fpu_fpr64.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6915 c046a42c-6fe2-441c-8c8c-71466251a162
[ Note: depends on char closing fixes ]
Properly clean up the gdbstub when the user tries to re-open it
(possibly under a different address). Moreover, allow to shut it down
from the monitor via 'gdbserver none'.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6913 c046a42c-6fe2-441c-8c8c-71466251a162
This patch fixes several issues around closing char devices. Affected
were pty (timer was left behind, even running), udp (no close handling
at all) and tcp (missing async IO handler cleanup). The bugs either
caused segfaults or stalled the qemu process. So far, hot-unplugging USB
serial adapters suffered from this.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6911 c046a42c-6fe2-441c-8c8c-71466251a162
If the user specifies the backing file format,
then when opening the backing file, there is no need
to probe the (backing file) image to figure out its format.
This follows my previous patches implementing bdrv_create2
which keeps (for qcow2 only) the backing file format
as a qcow2-extension
Suggested by Daniel P. Berrange.
Signed-off-by: Uri Lublin <uril@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6910 c046a42c-6fe2-441c-8c8c-71466251a162
Use a qcow2 extension to keep the backing file format.
By keeping the backing file format, we can:
1. Provide a way to know the backing file format without probing
it (setting the format at creation time).
2. Enable using qcow2 format over host block devices.
(only if the user specifically asks for it, by providing the format
at creation time).
Also fixes a security flaw found by Daniel P. Berrange on [1]
which summarizes: "Autoprobing: just say no."
[1] http://lists.gnu.org/archive/html/qemu-devel/2008-12/msg01083.html
Signed-off-by: Uri Lublin <uril@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6909 c046a42c-6fe2-441c-8c8c-71466251a162
Added a backing_format field to BlockDriverState.
Added bdrv_create2 and drv->bdrv_create2 to create an image with
a known backing file format.
Upon bdrv_open2 if backing format is known use it, instead of
probing the (backing) image.
Signed-off-by: Uri Lublin <uril@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6908 c046a42c-6fe2-441c-8c8c-71466251a162
Qcow2 extensions are build of magic (id) len (in bytes) and data.
They reside right after the qcow2 header.
If a backing filename exists it follows the qcow2 extension (if exist)
Qcow2 extensions are read upon image open.
Qcow2 extensions are identified by their magic.
Unknown qcow2 extensions (unknown magic) are skipped.
A Special magic of 0 means end-of-qcow2-extensions.
In this patchset, to be used to keep backing file format.
Based on a work done by Shahar Frank <sfrank@redhat.com>.
Signed-off-by: Uri Lublin <uril@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6907 c046a42c-6fe2-441c-8c8c-71466251a162
As cpu_memory_rw_debug is now capable of modifying ROM, we can drop our
own patch function.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6906 c046a42c-6fe2-441c-8c8c-71466251a162
Enhance cpu_memory_rw_debug so that it can write even to ROM regions.
This allows to modify ROM via gdb (I see no point in denying this to the
user), and it will enable us to drop kvm_patch_opcode_byte().
Credits go to Avi for suggesting this.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6905 c046a42c-6fe2-441c-8c8c-71466251a162
Use the generic bdrv_aio_readv/bdrv_aio_writev APIs instead of linearizing
buffers directly. This enables using the future native preadv/pwritev
support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6903 c046a42c-6fe2-441c-8c8c-71466251a162
