Make sure we don't leave guest_cursor pointing into nowhere. This might
lead to (rare) live migration failures, due to target trying to restore
the cursor from the stale pointer.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1421788
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1488789111-27340-1-git-send-email-kraxel@redhat.com
We are switching BUILD_BUG_ON to verify that it's parameter is a
compile-time constant, and it turns out that some gcc versions
(specifically gcc (Ubuntu 5.4.0-6ubuntu1~16.04.4) 5.4.0 20160609) are
not smart enough to figure it out for expressions involving local
variables. This is harmless but means that the check is ineffective for
these platforms. To fix, replace variables with macros.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Currently if the client keeps sending the same monitor config to
QEMU/spice-server, QEMU will always raise
a QXL_INTERRUPT_CLIENT_MONITORS_CONFIG regardless of whether there was a
change or not.
Guest-side (with fedora 25), the kernel QXL KMS driver will also forward the
event to user-space without checking if there were actual changes.
Next in line are gnome-shell/mutter (on a default f25 install), which
will try to reconfigure everything without checking if there is anything
to do.
Where this gets ugly is that when applying the resolution changes,
gnome-shell/mutter will call drmModeRmFB, drmModeAddFB, and
drmModeSetCrtc, which will cause the primary surface to be destroyed and
recreated by the QXL KMS driver. This in turn will cause the client to
resend a client monitors config message, which will cause QEMU to reemit
an interrupt with an unchanged monitors configuration, ...
This causes https://bugzilla.redhat.com/show_bug.cgi?id=1266484
This commit makes sure that we only emit
QXL_INTERRUPT_CLIENT_MONITORS_CONFIG when there are actual configuration
changes the guest should act on.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Message-id: 20161028144840.18326-1-cfergeau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qxl_set_dirty() expects start and end as range specification.
qxl_dirty_one_surface passes 'size' instead of 'offset + size' as end
parameter. Fix that. Also use uint64_t everywhere while being at it.
Bug was added by "e25139b qxl: set only off-screen surfaces dirty instead
of the whole vram" and carried forward unnoticed by "5cdc402 qxl: fix
surface migration".
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1468413187-22071-1-git-send-email-kraxel@redhat.com
Spice deprecated this callback in 0.12.6.
It's not a problem yet, but it will cause Clang to fail in a -Werror
build due to the deprecated tag.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1467240095-12507-2-git-send-email-jsnow@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Create a helper function qxl_dirty_one_surface() to mark a single qxl
surface as dirty. Use the new qxl_get_check_slot_offset function and
lookup the memory region from the slot instead of assuming the surface
is stored in vram.
Use the new helper function in qxl_dirty_surfaces, for both primary and
off-screen surfaces. For off-screen surfaces this is no functional
change. For primary surfaces this will dirty only the memory actually
used instead of the whole surface0 region. It will also work correctly
in case the guest places the primary surface in vram instead of the
surface0 region (linux kms driver does that).
https://bugzilla.redhat.com/show_bug.cgi?id=1235732
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1466597244-5938-3-git-send-email-kraxel@redhat.com
Store MemoryRegion and offset instead of a pointer for each qxl memory
slot, so we can easily figure in which memory region an qxl object
stored.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1466597244-5938-2-git-send-email-kraxel@redhat.com
New helper function which translates a qxl physical address into
memory slot and offset. Also applies sanity checks. Factored out
from qxl_phys2virt. No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1466597244-5938-1-git-send-email-kraxel@redhat.com
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-21-git-send-email-peter.maydell@linaro.org
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T). Same Coccinelle semantic patch as in commit b45c03f.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Symptom:
$ qemu-system-x86_64 -m 10000000
Unexpected error in ram_block_add() at /work/armbru/qemu/exec.c:1456:
upstream-qemu: cannot set up guest memory 'pc.ram': Cannot allocate memory
Aborted (core dumped)
Root cause: commit ef701d7 screwed up handling of out-of-memory
conditions. Before the commit, we report the error and exit(1), in
one place, ram_block_add(). The commit lifts the error handling up
the call chain some, to three places. Fine. Except it uses
&error_abort in these places, changing the behavior from exit(1) to
abort(), and thus undoing the work of commit 3922825 "exec: Don't
abort when we can't allocate guest memory".
The three places are:
* memory_region_init_ram()
Commit 4994653 (right after commit ef701d7) lifted the error
handling further, through memory_region_init_ram(), multiplying the
incorrect use of &error_abort. Later on, imitation of existing
(bad) code may have created more.
* memory_region_init_ram_ptr()
The &error_abort is still there.
* memory_region_init_rom_device()
Doesn't need fixing, because commit 33e0eb5 (soon after commit
ef701d7) lifted the error handling further, and in the process
changed it from &error_abort to passing it up the call chain.
Correct, because the callers are realize() methods.
Fix the error handling after memory_region_init_ram() with a
Coccinelle semantic patch:
@r@
expression mr, owner, name, size, err;
position p;
@@
memory_region_init_ram(mr, owner, name, size,
(
- &error_abort
+ &error_fatal
|
err@p
)
);
@script:python@
p << r.p;
@@
print "%s:%s:%s" % (p[0].file, p[0].line, p[0].column)
When the last argument is &error_abort, it gets replaced by
&error_fatal. This is the fix.
If the last argument is anything else, its position is reported. This
lets us check the fix is complete. Four positions get reported:
* ram_backend_memory_alloc()
Error is passed up the call chain, ultimately through
user_creatable_complete(). As far as I can tell, it's callers all
handle the error sanely.
* fsl_imx25_realize(), fsl_imx31_realize(), dp8393x_realize()
DeviceClass.realize() methods, errors handled sanely further up the
call chain.
We're good. Test case again behaves:
$ qemu-system-x86_64 -m 10000000
qemu-system-x86_64: cannot set up guest memory 'pc.ram': Cannot allocate memory
[Exit 1 ]
The next commits will repair the rest of commit ef701d7's damage.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1441983105-26376-3-git-send-email-armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
The new spice-server function to limit the number of monitors (0.12.6)
changed while development from spice_qxl_set_monitors_config_limit to
spice_qxl_max_monitors (accepted upstream).
By mistake I post patch with former name.
This patch fix the function name.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This patch allow to limit number of heads using qxl driver. By default
qxl driver is not limited on any kind on head use so can decide to use
as much heads.
libvirt has this as a video card parameter (actually set to 1 but not
used). This parameter will allow to limit setting a use can do (which
could be confusing).
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
We create optional sections with this patch. But we already have
optional subsections. Instead of having two mechanism that do the
same, we can just generalize it.
For subsections we just change:
- Add a needed function to VMStateDescription
- Remove VMStateSubsection (after removal of the needed function
it is just a VMStateDescription)
- Adjust the whole tree, moving the needed function to the corresponding
VMStateDescription
Signed-off-by: Juan Quintela <quintela@redhat.com>
Skip mm_time updates (in qxl device memory) in case the guest is stopped.
Guest isn't able to look anyway, and it causes problems with migration.
Also make sure the initial state for spice server is stopped.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU/CoXAAoJECgfDbjSjVRpX7EH/RMmgtsDO4wvqJu++lHvkB/q
kSaXZYTpJTo0i5JE7n2brwuXA4902tTg9g5TMUpGPh9Pt2QRg7RTgGC1vqZyOBos
MPw+4BO2v66S6qgX7bOf222z7r64cHTY7pLkQlrfD4usPlu2eusZ64UTW6Ru51fW
WF9E9aunbl+HnuCGq6Iez3sCLscTBJpU/lEr6oSyHhuq3aa0CjjraEeV0E/QcwJG
HTUeFymL8NFvlXZblsLI++VOv7Mxpi6yiCQ5XoKpFgGMvidwo41Aso6gB3ySGxOd
w8O3Nbu77Iw/StDRNCg/5/GapabMKh2bE4UCsYY5OS63ZtD0fl0CCblhzm/ZFPw=
=LY/j
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio fixes and cleanups
A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* remotes/mst/tags/for_upstream: (130 commits)
acpi: drop unused code
aml-build: comment fix
acpi-build: fix typo in comment
acpi: update generated files
vhost user:support vhost user nic for non msi guests
aml-build: fix build for glib < 2.22
acpi: update generated files
Makefile.target: binary depends on config-devices
acpi-test-data: update after pci rewrite
acpi, mem-hotplug: use PC_DIMM_SLOT_PROP in acpi_memory_plug_cb().
pci-hotplug-old: Has been dead for five major releases, bury
pci: Give a few helpers internal linkage
acpi: make build_*() routines static to aml-build.c
pc: acpi: remove not used anymore ssdt-[misc|pcihp].hex.generated blobs
pc: acpi-build: drop template patching and create PCI bus tree dynamically
tests: ACPI: update pc/SSDT.bridge due to new alg of PCI tree creation
pc: acpi-build: simplify PCI bus tree generation
tests: add ACPI blobs for qemu with bridge cases
tests: bios-tables-test: add support for testing bridges
tests: ACPI test blobs update due to PCI0._CRS changes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
hw/pci/pci-hotplug-old.c
Commit 3dcadce507 added three
update_displaychangelistener call sites:
Two for primary qxl cards, when entering/leaving vga mode, which are
correct.
One for secondary qxl cards, which is wrong because we don't register
a displaychangelistener in the first place for secondary cards.
Remove it.
Reported-by: Brad Campbell <lists2009@fnarfbargle.com>
Tested-by: Brad Campbell <lists2009@fnarfbargle.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We already have pow2floor, mirror it and use instead of a function with
similar results (same in used domain), to clarify our intent.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vga_common_init() doesn't allow more than 256 MiB vram size and silently
shrinks any larger value. qxl_dirty_surfaces() used the unshrinked size
via qxl->shadow_rom.surface0_area_size when accessing the memory, which
resulted in segfault.
Add a workaround for this case and an assert if it happens again.
We have to bump the vga memory limit too, because 256 MiB wouldn't have
allowed 8k (it requires more than 128 MiB).
1024 MiB doesn't work, but 512 MiB seems fine.
Proposed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Now that cursor updates are out of the way qxl needs the refresh timer
only when when running in vga mode, for dirty bitmap checking. In
native qxl mode the guest will notify us, so we don't need to poll and
can use the idle interval (one refresh wakeup every few seconds).
Cc: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Calling directly doesn't work due to the qxl-render code running in
spice server thread context. Meanwhile bottom half scheduling is
thread-safe though, so we can use that to kick a cursor update in
main i/o thread context.
Cc: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Xorg server hangs when using xfig and typing a text with space:
#0 qxl_wait_for_io_command (qxl=<value optimized out>) at qxl_io.c:47
#1 0x00007f826a49a299 in qxl_download_box (surface=0x221d030, x1=231, y1=259,
x2=<value optimized out>, y2=<value optimized out>) at qxl_surface.c:143
while (!(ram_header->int_pending & QXL_INTERRUPT_IO_CMD))
usleep (1);
The QXL driver is calling QXL_IO_UPDATE_AREA with an empty area. This
is a guest bug. The call is async and no ack is sent back on guest
bug, so the X server will hang. The driver should be improved to avoid
this situation and also to abort on QXL_INTERRUPT_ERROR. This will be
a different patch series for the driver. However, it is simple enough
to keep qemu running on empty areas update, which is what this patch
provides.
https://bugzilla.redhat.com/show_bug.cgi?id=1151363
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Simply switch function pointers when entering/leaving vga mode.
Allows to remove wrapper functions which do nothing but dispatch
calls depending on the current qxl mode.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add parameter errp to memory_region_init_ram and update all call sites
to pass in &error_abort.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VgaState->vram_size is the size of the pci bar. In case of qxl not the
whole pci bar can be used as vga framebuffer. Add a new variable
vbe_size to handle that case. By default (if unset) it equals
vram_size, but qxl can set vbe_size to something else.
This makes sure VBE_DISPI_INDEX_VIDEO_MEMORY_64K returns correct results
and sanity checks are done with the correct size too.
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
So you'll have a mouse pointer when running non-qxl gfx cards with
mouse pointer support (virtio-gpu, IIRC vmware too).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
PortioList is an abstraction used for construction of MemoryRegionPortioList
from MemoryRegionPortio. It can be used later to unmap created memory regions.
It also requires proper cleanup because some of the memory inside is allocated
dynamically.
By moving PortioList ot device state we make it possible to cleanup later and
avoid leaking memory.
This change spans several target platforms. The following testcases cover all
changed lines:
qemu-system-ppc -M prep
qemu-system-i386 -vga qxl
qemu-system-i386 -M isapc -soundhw adlib -device ib700,id=watchdog0,bus=isa.0
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Need a way to opt-out from vga.vram being global vmstate, for
secondary vga cards. Add a bool parameter to vga_common_init
to support this.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Most changes here are hotplug related:
This merges hotplug infrastructure changes by Igor,
some acpi related fixes, and PC fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJS+Jg2AAoJECgfDbjSjVRp2hIH/3PezOqYAJlp1LzHPYgTII5R
ZWdlHWJODB5QKGuDnJ0rKTZn+9n4f27Q7ynwqrodrLNtzglfmPUwtjTb52vbd1yh
qJ7BtvGIewUEjTPVs2feipb75jFZFhvIU46F1jPJAiaNKG0nl6zwVHn5XfFqesv2
4TlHAoqYvpUUuFcG7Qu+hREUrjb/tdxwP8EYM4qDPOSxguS2R2+3/17BVlPDQGia
bKl6j5EmnmmbQ0h8Sepy3YKh9d1rZnKFsolMFrL8ITjzEzzyKjpE284GNe/5eY25
HR25dY5eYTb0d3QPeH2O5sOrZgOFpTZc8WOo9Kxi0OTjWxFoZstZ1AOM3A2DAoY=
=EtLZ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi,pc,pci fixes and enhancements
Most changes here are hotplug related:
This merges hotplug infrastructure changes by Igor,
some acpi related fixes, and PC fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 10 Feb 2014 09:13:26 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
ACPI: Remove commented-out code from HPET._CRS
hw/pci: switch to a generic hotplug handling for PCIDevice
pci/pcie: convert PCIE hotplug to use hotplug-handler API
pci/shpc: convert SHPC hotplug to use hotplug-handler API
acpi/piix4pm: convert ACPI PCI hotplug to use hotplug-handler API
qdev:pci: refactor PCIDevice to use generic "hotpluggable" property
hw/acpi: move typeinfo to the file end
qdev: add "hotpluggable" property to Device
qdev: add to BusState "hotplug-handler" link
define hotplug interface
loader: document that errno is set
pc.c: better error message on initrd sizing failure
pc_piix: enable legacy hotplug for Xen
qtest: don't report signals if qtest driver enabled
hw:piix4:acpi: reuse pcihp code for legacy PCI hotplug
pcihp: remove unused AcpiPciHpPciStatus.device_present field
pcihp: make pci_read() mmio calback compatible with legacy ACPI hotplug
pcihp: make PCI hotplug mmio handlers indifferent to PCI_HOTPLUG_ADDR
pcihp: replace enable|disable_device() with oneliners
pcihp: reduce number of device check events
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Get rid of PCIDevice specific PCIDeviceClass.no_hotplug and use
generic DeviceClass.hotpluggable field instead.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Several small signedness / overflow corrections to qxl_create_guest_primary:
1. use 64 bit unsigned for size to avoid overflow possible from two 32
bit multiplicants.
2. correct sign for requested_height
3. add a more verbose error message when setting guest bug state (which
causes a complete guess blackout until reset, so it helps if it is
verbose).
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Without this we occasionally trigger an assert at
hw/pci/pci.c:pcibus_reset that asserts the irq_count is zero on reset.
This has become a problem with the new drm driver for linux, since doing
a reboot from console causes a race between console updates that set the
irq and the reset assertion that the irq is clear.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Hard reset can happen at any time. We should be able to put qxl into a
known-good state no matter what. Stop spice server thread for reset so
it can't be confused by fetching stale commands lingering around in the
rings while we reset is ongoing.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qxl creates a pipe, then writes something to it to wake up the iothread
from the spice server thread to raise an irq. These days qemu bottom
halves can be scheduled from threads and signals, so there is no reason
to do this any more. Time to clean it up.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSXNO8AAoJECgfDbjSjVRp7VAH/0B73mCOiyVACGx7fazK3SGK
X8TxZWVtG5A77ISqKyrtjLAhK9DCQjEzQTbMNhXHM3Ar6crwo7nJZnQvH2Gh1X2p
34BOQSVc4rtXz5pwDIr48dBLrxeslwXub79chUs+IK1/4RSn3h3nuS3k6JVkmLJN
rcHMj4ljJmi4Hd9vOpmS1jo/a61usi36hhU7CMgcrsXzStZycBBzCozOB3VW8p1X
/iwyf91YjmNPkn9gA3/aViGjszu8jE91dkA0C+ljwvcGbs2yEl3LCWEJfsMvoh5P
2M+k0XXbHwq/P9PFMa/2/lWOo4EO4Oxa+G/6QvovJrteYnktr+E9DqjU8pCT7yI=
=CVfs
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci, pc, acpi fixes, enhancements
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Oct 2013 07:33:48 AM CEST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
* mst/tags/for_anthony: (39 commits)
ssdt-proc: update generated file
ssdt: fix PBLK length
i386: ACPI table generation code from seabios
pc: use new api to add builtin tables
acpi: add interface to access user-installed tables
hpet: add API to find it
pvpanic: add API to access io port
ich9: APIs for pc guest info
piix: APIs for pc guest info
acpi/piix: add macros for acpi property names
i386: define pc guest info
loader: allow adding ROMs in done callbacks
i386: add bios linker/loader
loader: use file path size from fw_cfg.h
acpi: ssdt pcihp: updat generated file
acpi: pre-compiled ASL files
acpi: add rules to compile ASL source
i386: add ACPI table files from seabios
q35: expose mmcfg size as a property
q35: use macro for MCFG property name
...
Message-id: 1381818560-18367-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
# By Paolo Bonzini (10) and others
# Via Paolo Bonzini
* bonzini/iommu-for-anthony:
exec: remove qemu_safe_ram_ptr
icount: make it thread-safe
icount: document (future) locking rules for icount
icount: prepare the code for future races in calling qemu_clock_warp
icount: reorganize icount_warp_rt
icount: use cpu_get_icount() directly
timer: add timer_mod_anticipate and timer_mod_anticipate_ns
timer: extract timer_mod_ns_locked and timerlist_rearm
timer: make qemu_clock_enable sync between disable and timer's cb
qemu-thread: add QemuEvent
timer: protect timers_state's clock with seqlock
seqlock: introduce read-write seqlock
vga: Mark relevant portio lists regions as coalesced MMIO flushing
cirrus: Mark vga io region as coalesced MMIO flushing
portio: Allow to mark portio lists as coalesced MMIO flushing
compatfd: switch to QemuThread
memory: fix 128 arithmetic in info mtree
Message-id: 1382024935-28297-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This allows to remove the explicit qemu_flush_coalesced_mmio_buffer
calls.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch fixes spice display initialization to handle
multihead properly.
spice-core now keeps track of which QemuConsole has a spice
display channel attached to it and which has not. It also
manages display channel ids.
spice-display looks at all QemuConsoles and will pick up any
graphic console not yet bound to a spice channel (which in practice
are all non-qxl graphic devices).
Result is that
(a) you'll get a spice client window for each graphical device
now (first only without this patch), and
(b) mixing qxl and non-qxl vga cards works properly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann
Michael S. Tsirkin
Christophe Fergeau
John Snow
Peter Maydell
Markus Armbruster
Frediano Ziglio
Juan Quintela
Gonglei
Chih-Min Chao
Radim Krčmář
Marc-André Lureau
Hu Tao
Kirill Batuzov
Igor Mammedov
Alon Levy
Anthony Liguori
Anthony Liguori
Jan Kiszka