move FADT data initialization out of fadt_setup() into dedicated
init_fadt_data() that will set common for pc/q35 values in
AcpiFadtData structure and acpi_get_pm_info() will complement
it with pc/q35 specific values initialization.
That will allow to get rid of fadt_setup() and generalize
build_fadt() so it could be easily extended for rev5 and
reused by ARM target.
While at it also move facs/dsdt/xdsdt offsets from build_fadt()
arg list into AcpiFadtData, as they belong to the same dataset.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ACPI_PORT_SMI_CMD is alias for APM_CNT_IOPORT,
so make it really one instead of duplicating its value.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
next patch will need it before it gets to piix4/lpc branches
that initializes 'obj' now.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
SEV requires that guest bios must be encrypted before booting the guest.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180308223946.26784-26-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au> (hw/ppc)
Message-Id: <20180308223946.26784-4-f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Move the header from hw/isa/ to hw/dma/
- Remove the old i386/pc dependency
- use a bool type for the high_page_enable argument
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180308223946.26784-3-f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Again... (after 07dc788054 and 9157eee1b1).
We now extract the ISA bus specific helpers.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180308223946.26784-2-f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow distributions to disable the Intel and/or AMD IOMMU devices.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After reviewing a patch from Philippe that removes block-backend.h
from hw/lm32/milkymist.c, I noticed that this header is included
unnecessarily in a lot of other files, too. Remove those unneeded
includes to speed up the compilation process a little bit.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1518684912-31637-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The e1000 NIC is getting old and is not a very good default for a
PCIe machine type. Change it to e1000e, which should be supported
by a good number of guests.
In particular, drivers for 82574 were added first to Linux 2.6.27 (2008)
and Windows 2008 R2. This does mean that Windows 2008 will not work
anymore with Q35 machine types and a default "-net nic -net xxx" network
configuration; it did work before because it does have an AHCI driver.
However, Windows 2008 has been declared out of main stream support
in 2015. It will get out of extended support in 2020. Windows 2008
R2 has the same end of support dates and, since the two are basically
Vista vs. Windows 7, R2 probably is more popular.
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change all fprintf(stderr...) calls in hw/i386/multiboot.c to call
error_report() instead, including the mb_debug macro. Remove the "\n"
from strings passed to all modified calls, since error_report() appends
one.
Signed-off-by: Jack Schwartz <jack.schwartz@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Refer to field names when displaying fields in printf and debug statements.
Signed-off-by: Jack Schwartz <jack.schwartz@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The multiboot spec (https://www.gnu.org/software/grub/manual/multiboot/),
section 3.1.3, allows for bss_end_addr to be zero.
A zero bss_end_addr signifies there is no .bss section.
Suggested-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Jack Schwartz <jack.schwartz@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Automatic creation of SCSI controllers for "-drive if=scsi" for x86
machines was quite a bad idea (see description of commit f778a82f0c
for details). This is marked as deprecated since QEMU v2.9.0, and as
far as I know, nobody complained that this is still urgently required
anymore. Time to remove this now.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1519123357-13225-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The previous commit improved compile time by including less of the
generated QAPI headers. This is impossible for stuff defined directly
in qapi-schema.json, because that ends up in headers that that pull in
everything.
Move everything but include directives from qapi-schema.json to new
sub-module qapi/misc.json, then include just the "misc" shard where
possible.
It's possible everywhere, except:
* monitor.c needs qmp-command.h to get qmp_init_marshal()
* monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need
qapi-event.h to get enum QAPIEvent
Perhaps we'll get rid of those some other day.
Adding a type to qapi/migration.json now recompiles some 120 instead
of 2300 out of 5100 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-25-armbru@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter. Drop the include, and add it
to the places that actually need it.
While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.
This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
The macro expansions of qdict_put_TYPE() and qlist_append_TYPE() need
qbool.h, qnull.h, qnum.h and qstring.h to compile. We include qnull.h
and qnum.h in the headers, but not qbool.h and qstring.h. Works,
because we include those wherever the macros get used.
Open-coding these helpers is of dubious value. Turn them into
functions and drop the includes from the headers.
This cleanup makes the number of objects depending on qapi/qmp/qnum.h
from 4551 (out of 4743) to 46 in my "build everything" tree. For
qapi/qmp/qnull.h, the number drops from 4552 to 21.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-10-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
tpm_crb is a device for TPM 2.0 Command Response Buffer (CRB)
Interface as defined in TCG PC Client Platform TPM Profile (PTP)
Specification Family “2.0” Level 00 Revision 01.03 v22.
The PTP allows device implementation to switch between TIS and CRB
model at run time, but given that CRB is a simpler device to
implement, I chose to implement it as a different device.
The device doesn't implement other locality than 0 for now (my laptop
TPM doesn't either, so I assume this isn't so bad)
Tested with some success with Linux upstream and Windows 10, seabios &
modified ovmf. The device is recognized and correctly transmit
command/response with passthrough & emu. However, we are missing PPI
ACPI part atm.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Remove dependency of possible_cpus on 1st CPU instance,
which decouples configuration data from CPU instances that
are created using that data.
Also later it would be used for enabling early cpu to numa node
configuration at runtime qmp_query_hotpluggable_cpus() should
provide a list of available cpu slots at early stage,
before machine_init() is called and the 1st cpu is created,
so that mgmt might be able to call it and use output to set
numa mapping.
Use MachineClass::possible_cpu_arch_ids() callback to set
cpu type info, along with the rest of possible cpu properties,
to let machine define which cpu type* will be used.
* for SPAPR it will be a spapr core type and for ARM/s390x/x86
a respective descendant of CPUClass.
Move parse_numa_opts() in vl.c after cpu_model is parsed into
cpu_type so that possible_cpu_arch_ids() would know which
cpu_type to use during layout initialization.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <1515597770-268979-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The only user-creatable sysbus devices in qemu-system-x86_64 are
amd-iommu, intel-iommu, and xen-backend. xen-backend is handled
by xen_set_dynamic_sysbus(), so we only need to add amd-iommu and
intel-iommu.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20171125151610.20547-7-ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The existing has_dynamic_sysbus flag makes the machine accept
every user-creatable sysbus device type on the command-line.
Replace it with a list of allowed device types, so machines can
easily accept some sysbus devices while rejecting others.
To keep exactly the same behavior as before, the existing
has_dynamic_sysbus=true assignments are replaced with a
TYPE_SYS_BUS_DEVICE entry on the allowed list. Other patches
will replace the TYPE_SYS_BUS_DEVICE entries with more specific
lists of devices.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: qemu-arm@nongnu.org
Cc: qemu-ppc@nongnu.org
Cc: xen-devel@lists.xenproject.org
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20171125151610.20547-2-ehabkost@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Starting qemu with
qemu-system-x86_64 -S -M isapc -device {amd|intel}-iommu
leads to a segfault. The code assume PCI bus is present and
tries to access the bus structure without checking.
Since Intel VT-d and AMDVI should only work with PCI, add a
check for PCI bus and return error if not present.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Instead of having the same error checks in vtd_realize()
and amdvi_realize(), move that over to the generic
x86_iommu_realize().
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
It may be hard to read the assignment statement of "next_base", so
S/next_base += (1ULL << 32) - pcms->below_4g_mem_size;
/next_base = mem_base + mem_len;
... for readability.
No functionality change.
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current implementation of Intel IOMMU code only supports 39 bits
iova address width. This patch provides a new parameter (x-aw-bits)
for intel-iommu to extend its address width to 48 bits but keeping the
default the same (39 bits). The reason for not changing the default
is to avoid potential compatibility problems with live migration of
intel-iommu enabled QEMU guest. The only valid values for 'x-aw-bits'
parameter are 39 and 48.
After enabling larger address width (48), we should be able to map
larger iova addresses in the guest. For example, a QEMU guest that
is configured with large memory ( >=1TB ). To check whether 48 bits
aw is enabled, we can grep in the guest dmesg output with line:
"DMAR: Host address width 48".
Signed-off-by: Prasad Singamsetty <prasad.singamsety@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current implementation of Intel IOMMU code only supports 39 bits
host/iova address width so number of macros use hard coded values based
on that. This patch is to redefine them so they can be used with
variable address widths. This patch doesn't add any new functionality
but enables adding support for 48 bit address width.
Signed-off-by: Prasad Singamsetty <prasad.singamsety@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When -no-acpi option is used with Q35 machine type, no guest ACPI is
built, but the ACPI device is still created, so only checking the
presence of ACPI device before memory plug/unplug is not enough in
such cases. Check whether ACPI is disabled globally in addition and
fail memory plug/unplug if it's disabled.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Message-Id: <20171222015120.31730-1-haozhong.zhang@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
More recent specs of the TPM2 ACPI table add fields for the log area
start address and the log area minimum size, which we already use
for the TCPA table.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
It should be caching-mode. It may confuse people when it pops up.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Liu, Yi L <yi.l.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We have PCI_DEVFN_MAX now.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Liu, Yi L <yi.l.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When compiled with anything other than the 'log' trace backend, we have:
error: implicit declaration of function 'qemu_log_mask'
error: 'LOG_UNIMP' undeclared (first use in this function)
This patch adds the missing include.
Fixes: 7299e1a411
("hw/i386/vmport: replace fprintf() by trace events or LOG_UNIMP")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20171221211103.30311-1-laurent@vivier.eu
[PMM: fixed commit message description of when problem occurs]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now both classes (i8259, i8259-kvm) support this. Move this upper to
the common class code.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20171210063819.14892-6-peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's leverage the i8259 common code for kvm-i8259 too.
I think it's still possible that stats can lost when i8259 is in kernel
and meanwhile when irqfd is used, e.g., by vfio or vhost devices.
However that should be rare IMHO since they should be using MSIs mostly
if they really want performance (that's why people use vhost and device
assignment), and no old INTx should be used. As long as the INTx users
are emulated in QEMU the stats will be correct.
For "info pic", it should be always accurate since we fetch kvm regs
before dump.
More importantly, it's just too simple to do this now - it's only 10+
LOC to gain this feature.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20171210063819.14892-5-peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's a x86-only device, so it does not make sense to keep it
in the shared misc folder.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It's a x86-only device, so it does not make sense to keep it
in the shared misc folder.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
and remove the old i386/pc dependency
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
instead move them to the source file
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The device should be exposed if present. It shouldn't have an
undefined version (or else backend init failed, and device should fail
too). Finally, make the fields specific to TIS device model.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
This will allow to introduce new devices implementing TPM.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
pci_find_primary_bus() only has one user, in pc_xen_hvm_init(). That's
inside the machine construction code, so it already has easy access to the
machine's primary PCI bus.
Get it directly, and thereby remove pci_find_primary_bus(). This removes
one of only a handful of users of the ugly pci_host_bridges global.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
The bus pointer in PCIDevice is basically redundant with QOM information.
It's always initialized to the qdev_get_parent_bus(), the only difference
is the type.
Therefore this patch eliminates the field, instead creating a pci_get_bus()
helper to do the type mangling to derive it conveniently from the QOM
Device object underneath.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
when qemu is started with '-no-acpi' CLI option, an attempt
to unplug a CPU using device_del results in null pointer
dereference at:
#0 object_get_class
#1 pc_machine_device_unplug_request_cb
#2 qmp_marshal_device_del
which is caused by pcms->acpi_dev == NULL due to ACPI support
being disabled.
Considering that ACPI support is necessary for unplug to work,
check that it's enabled and fail unplug request gracefully
if no acpi device were found.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Linux and Windows need ACPI SRAT table to make memory hotplug work properly,
however currently QEMU doesn't create SRAT table if numa options aren't present
on CLI.
Which breaks both linux and windows guests in certain conditions:
* Windows: won't enable memory hotplug without SRAT table at all
* Linux: if QEMU is started with initial memory all below 4Gb and no SRAT table
present, guest kernel will use nommu DMA ops, which breaks 32bit hw drivers
when memory is hotplugged and guest tries to use it with that drivers.
Fix above issues by automatically creating a numa node when QEMU is started with
memory hotplug enabled but without '-numa' options on CLI.
(PS: auto-create numa node only for new machine types so not to break migration).
Which would provide SRAT table to guests without explicit -numa options on CLI
and would allow:
* Windows: to enable memory hotplug
* Linux: switch to SWIOTLB DMA ops, to bounce DMA transfers to 32bit allocated
buffers that legacy drivers/hw can handle.
[Rewritten by Igor]
Reported-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Alistair Francis <alistair23@gmail.com>
Cc: Takao Indoh <indou.takao@jp.fujitsu.com>
Cc: Izumi Taku <izumi.taku@jp.fujitsu.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently there is no MMIO range over 4G
reserved for PCI hotplug. Since the 32bit PCI hole
depends on the number of cold-plugged PCI devices
and other factors, it is very possible is too small
to hotplug PCI devices with large BARs.
Fix it by reserving 2G for I4400FX chipset
in order to comply with older Win32 Guest OSes
and 32G for Q35 chipset.
Even if the new defaults of pci-hole64-size will appear in
"info qtree" also for older machines, the property was
not implemented so no changes will be visible to guests.
Note this is a regression since prev QEMU versions had
some range reserved for 64bit PCI hotplug.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Legacy PCI device assignment has been removed from Linux in 4.12,
and had been deprecated 2 years ago there. We can remove it from
QEMU as well.
The ROM loading code was shared with Xen PCI passthrough, so move
it to hw/xen.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Xen vIOMMU device model will be in Xen hypervisor. Skip vIOMMU
check for Xen here when vcpu number is more than 255.
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Message-Id: <1502842933-8323-1-git-send-email-tianyu.lan@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
xen_modified_memory() sets errno to communicate what went wrong so log
this rather than the return value which is not interesting.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Since 4458fb3a79 (pc: Eliminate pc_default_machine_options()),
hot_add_cpu is set in pc_machine_class_init(), so we don't
need to set it in pc_q35_machine_options(), pc_i440fx_machine_options()
and xenfv_machine_options(), except to clear it in
pc_i440fx_1_4_machine_opt().
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't touch isapc when we change guest ABI and add new entries
to PC_COMPAT_* or new PCMachineClass compat flags. This means
isapc never guaranteed guest ABI and cross-QEMU-version live
migration compatibility. There's no point in keeping code for
kvm-pv-eoi and APIC ID compatibility in pc_init_isa().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of
TYPE_PCI_DEVICE, except:
1) The ones that already have INTERFACE_PCIE_DEVICE set:
* base-xhci
* e1000e
* nvme
* pvscsi
* vfio-pci
* virtio-pci
* vmxnet3
2) base-pci-bridge
Not all PCI bridges are Conventional PCI devices, so
INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes
that are actually Conventional PCI:
* dec-21154-p2p-bridge
* i82801b11-bridge
* pbm-bridge
* pci-bridge
The direct subtypes of base-pci-bridge not touched by this patch
are:
* xilinx-pcie-root: Already marked as PCIe-only.
* pcie-pci-bridge: Already marked as PCIe-only.
* pcie-port: all non-abstract subtypes of pcie-port are already
marked as PCIe-only devices.
3) megasas-base
Not all megasas devices are Conventional PCI devices, so the
interface names are added to the subclasses registered by
megasas_register_types(), according to information in the
megasas_devices[] array.
"megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add
INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas".
Acked-by: Alberto Garcia <berto@igalia.com>
Acked-by: John Snow <jsnow@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reintroduce the write callback that was removed when write support was
removed in commit 023e314856.
Contrary to the previous callback implementation, the write_cb
callback is called whenever a write happened, so handlers must be
ready to handle partial write as necessary.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
heterogeneous cpus are not supported and hotplugging different
cpu model crashes QEMU:
qemu-system-x86_64 -cpu qemu64 -smp 1,maxcpus=2
(qemu) device_add host-x86_64-cpu,socket-id=1,core-id=0,thread-id=0,id=foo
(qemu) info cpus
error: failed to get MSR 0x38d
qemu-system-x86_64: target/i386/kvm.c:2121: kvm_get_msrs: Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.
Aborted (core dumped)
Gracefully fail hotplug process in case of user mistake.
Reported-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1507638879-200718-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes e2b6c17 (kvmclock: update system_time_msr address forcibly)
which makes a call to get the latest value of the address
stored in system_timer_msr, but then uses the old address anyway.
Signed-off-by: Jim Somerville <Jim.Somerville@windriver.com>
Message-Id: <59b67db0bd15a46ab47c3aa657c81a4c11f168ea.1506702472.git.Jim.Somerville@windriver.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.
Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.
Note: If you add an error exit in your pre_save you must emit
an error_report to say why.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=LQ8U
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging
Machine/CPU/NUMA queue, 2017-09-19
# gpg: Signature made Tue 19 Sep 2017 21:17:01 BST
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/machine-next-pull-request:
MAINTAINERS: Update git URLs for my trees
hw/acpi-build: Fix SRAT memory building in case of node 0 without RAM
NUMA: Replace MAX_NODES with nb_numa_nodes in for loop
numa: cpu: calculate/set default node-ids after all -numa CLI options are parsed
arm: drop intermediate cpu_model -> cpu type parsing and use cpu type directly
pc: use generic cpu_model parsing
vl.c: convert cpu_model to cpu type and set of global properties before machine_init()
cpu: make cpu_generic_init() abort QEMU on error
qom: cpus: split cpu_generic_init() on feature parsing and cpu creation parts
hostmem-file: Add "discard-data" option
osdep: Define QEMU_MADV_REMOVE
vl: Clean up user-creatable objects when exiting
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, Using the fisrt node without memory on the machine makes
QEMU unhappy. With this example command line:
... \
-m 1024M,slots=4,maxmem=32G \
-numa node,nodeid=0 \
-numa node,mem=1024M,nodeid=1 \
-numa node,nodeid=2 \
-numa node,nodeid=3 \
Guest reports "No NUMA configuration found" and the NUMA topology is
wrong.
This is because when QEMU builds ACPI SRAT, it regards node 0 as the
default node to deal with the memory hole(640K-1M). this means the
node0 must have some memory(>1M), but, actually it can have no
memory.
Fix this problem by cut out the 640K hole in the same way the PCI
4G hole does.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Message-Id: <1504231805-30957-2-git-send-email-douly.fnst@cn.fujitsu.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Calculating default node-ids for CPUs in possible_cpu_arch_ids()
is rather fragile since defaults calculation uses nb_numa_nodes but
callback might be potentially called early before all -numa CLI
options are parsed, which would lead to cpus assigned only upto
nb_numa_nodes at the time possible_cpu_arch_ids() is called.
Issue was introduced by
(7c88e65 numa: mirror cpu to node mapping in MachineState::possible_cpus)
and for example CLI:
-smp 4 -numa node,cpus=0 -numa node
would set props.node-id in possible_cpus array for every non
explicitly mapped CPU to the first node.
Issue is not visible to guest nor to mgmt interface due to
1) implictly mapped cpus are forced to the first node in
case of partial mapping
2) in case of default mapping possible_cpu_arch_ids() is
called after all -numa options are parsed (resulting
in correct mapping).
However it's fragile to rely on late execution of
possible_cpu_arch_ids(), therefore add machine specific
callback that returns node-id for CPU and use it to calculate/
set defaults at machine_numa_finish_init() time when all -numa
options are parsed.
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1496314408-163972-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Tidy up some of the warn_report() messages after having converted them
to use warn_report().
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <9cb1d23551898c9c9a5f84da6773e99871285120.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all the multi-line uses of fprintf(stderr, "warning:"..."\n"...
to use warn_report() instead. This helps standardise on a single
method of printing warnings to the user.
All of the warnings were changed using these commands:
find ./* -type f -exec sed -i \
'N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
Indentation fixed up manually afterwards.
Some of the lines were manually edited to reduce the line length to below
80 charecters. Some of the lines with newlines in the middle of the
string were also manually edit to avoid checkpatch errrors.
The #include lines were manually updated to allow the code to compile.
Several of the warning messages can be improved after this patch, to
keep this patch mechanical this has been moved into a later patch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Jason Wang <jasowang@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <5def63849ca8f551630c6f2b45bcb1c482f765a6.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all the single line uses of fprintf(stderr, "warning:"..."\n"...
to use warn_report() instead. This helps standardise on a single
method of printing warnings to the user.
All of the warnings were changed using this command:
find ./* -type f -exec sed -i \
's|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig' \
{} +
Some of the lines were manually edited to reduce the line length to below
80 charecters.
The #include lines were manually updated to allow the code to compile.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com> [mips]
Message-Id: <ae8f8a7f0a88ded61743dff2adade21f8122a9e7.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While loading kernel via multiboot-v1 image, (flags & 0x00010000)
indicates that multiboot header contains valid addresses to load
the kernel image. These addresses are used to compute kernel
size and kernel text offset in the OS image. Validate these
address values to avoid an OOB access issue.
This is CVE-2017-14167.
Reported-by: Thomas Garnier <thgarnie@google.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <20170907063256.7418-1-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
define default CPU type in generic way in pc_machine_class_init()
and let common machine code to handle cpu_model parsing
Patch also introduces TARGET_DEFAULT_CPU_TYPE define for 2 purposes:
* make foo_machine_class_init() look uniform on every target
* use define in [bsd|linux]-user targets to pick default
cpu type
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1505318697-77161-5-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In vtd_switch_address_space() we did the memory region switch, however
it's possible that the caller of it has not taken the BQL at all. Make
sure we have it.
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Jason Wang <jasowang@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
HW part of ACPI PCI hotplug in QEMU depends on ACPI_PCIHP_PROP_BSEL
being set on a PCI bus that supports ACPI hotplug. It should work
regardless of the source of ACPI tables (QEMU generator/legacy SeaBIOS/Xen).
So move ACPI_PCIHP_PROP_BSEL initialization into HW ACPI implementation
part from QEMU's ACPI table generator.
To do PCI passthrough with Xen, the property ACPI_PCIHP_PROP_BSEL needs
to be set, but this was done only when ACPI tables are built which is
not needed for a Xen guest. The need for the property starts with commit
"pc: pcihp: avoid adding ACPI_PCIHP_PROP_BSEL twice"
(f0c9d64a68).
Adding find_i440fx into stubs so that mips-softmmu target can be built.
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
I found these pattern via grepping the source tree. I don't have a
coccinelle script for it!
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The 'm->numa_auto_assign_ram = numa_legacy_auto_assign_ram;' line
was supposed to be in pc_i440fx_2_9_machine_options() (see commit
3bfe5716 "numa: equally distribute memory on nodes"), but the
merge commit adb354dd ("Merge remote-tracking branch
'mst/tags/for_upstream' into staging") moved it to the
pc_i440fx_2_10_machine_options().
Move the line back to pc_i440fx_2_9_machine_options().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 20170818190943.23858-1-ehabkost@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU currently crashes when trying to use a 'pc-dimm' on the pseries
machine without specifying its 'memdev' property. This happens because
pc_dimm_get_memory_region() does not check whether the 'memdev' property
has properly been set by the user. Looking closer at this function, it's
also obvious that it is using &error_abort to call another function - and
this is bad in a function that is used in the hot-plugging calling chain
since this can also cause QEMU to exit unexpectedly.
So let's fix these issues in a proper way now: Add a "Error **errp"
parameter to pc_dimm_get_memory_region() which we use in case the 'memdev'
property has not been set by the user, and which we can use instead of
the &error_abort, and change the callers of get_memory_region() to make
use of this "errp" parameter for proper error checking.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Unmask previously masked SHPC feature in _OSC method.
Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
w2k used to boot on QEMU until revision of FADT has
been bumped to rev3
(commit 77af8a2b hw/i386: Use Rev3 FADT (ACPI 2.0) instead of Rev1 to improve guest OS support.)
Keep PC machine at rev1 to remain compatible and Q35
at rev3 where w2k isn't supported anyway so OSX could
run as well.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: John Arbuckle <programmingkidx@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
looking at bios ROM mapping in QEMU it seems that only isapc
(i.e. not PCI enabled machine) requires ROM being mapped as
RW in other cases BIOS is mapped as RO. Do the same for option
ROM 'pc.rom' when machine has PCI enabled.
As useful side-effect pc.rom MemoryRegion stops being
put in vhost memory map (filtered out by vhost_section()),
which reduces number of entries by 1.
Coincidentally it fixes migration failure reported in
"[PATCH V2] vhost: fix a migration failed because of vhost region merge"
where following destination CLI with /sys/module/vhost/parameters/max_mem_regions = 8
export DIMMSCOUNT=6
QEMU -enable-kvm \
-netdev type=tap,id=guest0,vhost=on,script=no,vhostforce \
-device virtio-net-pci,netdev=guest0 \
-m 256,slots=256,maxmem=2G \
`i=0; while [ $i -lt $DIMMSCOUNT ]; do echo \
"-object memory-backend-ram,id=m$i,size=128M \
-device pc-dimm,id=d$i,memdev=m$i"; i=$(($i + 1)); \
done`
will fail to startup with error:
"-device pc-dimm,id=d5,memdev=m5: a used vhost backend has no free memory slots left"
while it's possible to add the 6th DIMM during hotplug
on source.
Issue is caused by the fact that number of entries in vhost map
is bigger on 1 entry, when -device is processed, than
after guest boots up, and that offending entry belongs to
'pc.rom', it's not like vhost intends to do IO in ROM range
so making it RO hides region from vhost and makes number
of entries in vhost memory map at -device/machine_done time
match number of entries after guest boots.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reported-by: Peng Hao <peng.hao2@zte.com.cn>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It was cached by read/write separately. Let's merge them.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
IOMMUTLBEntry.iova is returned incorrectly on one PT path (though mostly
we cannot really trigger this path, even if we do, we are mostly
disgarding this value, so it didn't break anything). Fix it by
converting the VTD_PAGE_MASK into the correct definition
VTD_PAGE_MASK_4K, then remove VTD_PAGE_MASK.
Fixes: b93130 ("intel_iommu: cleanup vtd_{do_}iommu_translate()")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In trace format '#' flag of printf is forbidden. Fix it to '0x%'.
This patch is created by the following:
check that we have a problem
> find . -name trace-events | xargs grep '%#' | wc -l
56
check that there are no cases with additional printf flags before '#'
> find . -name trace-events | xargs grep "%[-+ 0'I]+#" | wc -l
0
check that there are no wrong usage of '#' and '0x' together
> find . -name trace-events | xargs grep '0x%#' | wc -l
0
fix the problem
> find . -name trace-events | xargs sed -i 's/%#/0x%/g'
[Eric Blake noted that xargs grep '%[-+ 0'I]+#' should be xargs grep
"%[-+ 0'I]+#" instead so the shell quoting is correct.
--Stefan]
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170731160135.12101-3-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Under certain circumstances normal xen-mapcache functioning may be broken
by guest's actions. This may lead to either QEMU performing exit() due to
a caught bad pointer (and with QEMU process gone the guest domain simply
appears hung afterwards) or actual use of the incorrect pointer inside
QEMU address space -- a write to unmapped memory is possible. The bug is
hard to reproduce on a i440 machine as multiple DMA sources are required
(though it's possible in theory, using multiple emulated devices), but can
be reproduced somewhat easily on a Q35 machine using an emulated AHCI
controller -- each NCQ queue command slot may be used as an independent
DMA source ex. using READ FPDMA QUEUED command, so a single storage
device on the AHCI controller port will be enough to produce multiple DMAs
(up to 32). The detailed description of the issue follows.
Xen-mapcache provides an ability to map parts of a guest memory into
QEMU's own address space to work with.
There are two types of cache lookups:
- translating a guest physical address into a pointer in QEMU's address
space, mapping a part of guest domain memory if necessary (while trying
to reduce a number of such (re)mappings to a minimum)
- translating a QEMU's pointer back to its physical address in guest RAM
These lookups are managed via two linked-lists of structures.
MapCacheEntry is used for forward cache lookups, while MapCacheRev -- for
reverse lookups.
Every guest physical address is broken down into 2 parts:
address_index = phys_addr >> MCACHE_BUCKET_SHIFT;
address_offset = phys_addr & (MCACHE_BUCKET_SIZE - 1);
MCACHE_BUCKET_SHIFT depends on a system (32/64) and is equal to 20 for
a 64-bit system (which assumed for the further description). Basically,
this means that we deal with 1 MB chunks and offsets within those 1 MB
chunks. All mappings are created with 1MB-granularity, i.e. 1MB/2MB/3MB
etc. Most DMA transfers typically are less than 1MB, however, if the
transfer crosses any 1MB border(s) - than a nearest larger mapping size
will be used, so ex. a 512-byte DMA transfer with the start address
700FFF80h will actually require a 2MB range.
Current implementation assumes that MapCacheEntries are unique for a given
address_index and size pair and that a single MapCacheEntry may be reused
by multiple requests -- in this case the 'lock' field will be larger than
1. On other hand, each requested guest physical address (with 'lock' flag)
is described by each own MapCacheRev. So there may be multiple MapCacheRev
entries corresponding to a single MapCacheEntry. The xen-mapcache code
uses MapCacheRev entries to retrieve the address_index & size pair which
in turn used to find a related MapCacheEntry. The 'lock' field within
a MapCacheEntry structure is actually a reference counter which shows
a number of corresponding MapCacheRev entries.
The bug lies in ability for the guest to indirectly manipulate with the
xen-mapcache MapCacheEntries list via a special sequence of DMA
operations, typically for storage devices. In order to trigger the bug,
guest needs to issue DMA operations in specific order and timing.
Although xen-mapcache is protected by the mutex lock -- this doesn't help
in this case, as the bug is not due to a race condition.
Suppose we have 3 DMA transfers, namely A, B and C, where
- transfer A crosses 1MB border and thus uses a 2MB mapping
- transfers B and C are normal transfers within 1MB range
- and all 3 transfers belong to the same address_index
In this case, if all these transfers are to be executed one-by-one
(without overlaps), no special treatment necessary -- each transfer's
mapping lock will be set and then cleared on unmap before starting
the next transfer.
The situation changes when DMA transfers overlap in time, ex. like this:
|===== transfer A (2MB) =====|
|===== transfer B (1MB) =====|
|===== transfer C (1MB) =====|
time --->
In this situation the following sequence of actions happens:
1. transfer A creates a mapping to 2MB area (lock=1)
2. transfer B (1MB) tries to find available mapping but cannot find one
because transfer A is still in progress, and it has 2MB size + non-zero
lock. So transfer B creates another mapping -- same address_index,
but 1MB size.
3. transfer A completes, making 1st mapping entry available by setting its
lock to 0
4. transfer C starts and tries to find available mapping entry and sees
that 1st entry has lock=0, so it uses this entry but remaps the mapping
to a 1MB size
5. transfer B completes and by this time
- there are two locked entries in the MapCacheEntry list with the SAME
values for both address_index and size
- the entry for transfer B actually resides farther in list while
transfer C's entry is first
6. xen_ram_addr_from_mapcache() for transfer B gets correct address_index
and size pair from corresponding MapCacheRev entry, but then it starts
looking for MapCacheEntry with these values and finds the first entry
-- which belongs to transfer C.
At this point there may be following possible (bad) consequences:
1. xen_ram_addr_from_mapcache() will use a wrong entry->vaddr_base value
in this statement:
raddr = (reventry->paddr_index << MCACHE_BUCKET_SHIFT) +
((unsigned long) ptr - (unsigned long) entry->vaddr_base);
resulting in an incorrent raddr value returned from the function. The
(ptr - entry->vaddr_base) expression may produce both positive and negative
numbers and its actual value may differ greatly as there are many
map/unmap operations take place. If the value will be beyond guest RAM
limits then a "Bad RAM offset" error will be triggered and logged,
followed by exit() in QEMU.
2. If raddr value won't exceed guest RAM boundaries, the same sequence
of actions will be performed for xen_invalidate_map_cache_entry() on DMA
unmap, resulting in a wrong MapCacheEntry being unmapped while DMA
operation which uses it is still active. The above example must
be extended by one more DMA transfer in order to allow unmapping as the
first mapping in the list is sort of resident.
The patch modifies the behavior in which MapCacheEntry's are added to the
list, avoiding duplicates.
Signed-off-by: Alexey Gerasimenko <x1917x@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
If we have a system with xenforeignmemory_map2() implemented
we don't need to save/restore physmap on suspend/restore
anymore. In case we resume a VM without physmap - try to
recreate the physmap during memory region restore phase and
remap map cache entries accordingly. The old code is left
for compatibility reasons.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
This new call is trying to update a requested map cache entry
according to the changes in the physmap. The call is searching
for the entry, unmaps it and maps again at the same place using
a new guest address. If the mapping is dummy this call will
make it real.
This function makes use of a new xenforeignmemory_map2() call
with an extended interface that was recently introduced in
libxenforeignmemory [1].
[1] https://www.mail-archive.com/xen-devel@lists.xen.org/msg113007.html
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Dummys are simple anonymous mappings that are placed instead
of regular foreign mappings in certain situations when we need
to postpone the actual mapping but still have to give a
memory region to QEMU to play with.
This is planned to be used for restore on Xen.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
