Qemu fails with below error when trying to run with virtio pmem:
(qemu) qemu-system-x86_64: -device virtio-pmem-pci,memdev=mem1,id=nv1:
device is modern-only, use disable-legacy=on
This patch fixes this by forcing virtio 1 with virtio-pmem.
fixes: adf0748a49 ("virtio-pci: Proxy for virtio-pmem")
Signed-off-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Message-Id: <20200925102251.7216-1-pankaj.gupta.linux@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 9b3a35ec82 ("virtio: verify that legacy support is not
accidentally on") added a safety check that requires to set
'disable-legacy=on' on virtio-iommu-pci:
qemu-system-aarch64: -device virtio-iommu-pci: device is modern-only,
use disable-legacy=on
virtio-iommu was introduced after the release of VIRTIO 1.0
specifications, so it should be 'modern-only'.
This patch forces virtio version 1 and removes the 'transitional_name'
property removing the need to specify 'disable-legacy=on' on
virtio-iommu-pci device.
Cc: qemu-stable@nongnu.org
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200908193309.20569-3-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If realize fails, domains and endpoints trees may be NULL. On
unrealize(), this produces assertions:
"GLib: g_tree_destroy: assertion 'tree != NULL' failed"
Check that the trees are non NULL before destroying them.
Cc: qemu-stable@nongnu.org
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200908193309.20569-2-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These were deprecated since 4.0, remove both HMP and QMP variants.
Users should use device_add command instead. To get list of
possible CPUs and options, use 'info hotpluggable-cpus' HMP
or query-hotpluggable-cpus QMP command.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200915120403.1074579-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For now only vhost-user-net device is supported by the test. Other
vhost-user devices are not tested. As a first step make source code
refactoring so new devices can reuse the same test routines. To make
this provide a new vhost_user_ops structure with the methods to
initialize device, its command line or make a proper vhost-user
responses.
Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <a48b60fb96fef230b75fff72a2d77040dcb5ef7c.1599813294.git.dimastep@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the vhost-user-blk daemon provides only one virtqueue, but device was
added with several queues, then QEMU will send more VHOST-USER command
than expected by daemon side. The vhost_virtqueue_start() routine
handles such case by checking the return value from the
virtio_queue_get_desc_addr() function call. Add the same check to the
vhost_dev_set_log() routine.
Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <6232946d5af09e9775076645909964a6539b8ab5.1599813294.git.dimastep@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-user devices can get a disconnect in the middle of the VHOST-USER
handshake on the migration start. If disconnect event happened right
before sending next VHOST-USER command, then the vhost_dev_set_log()
call in the vhost_migration_log() function will return error. This error
will lead to the assert() and close the QEMU migration source process.
For the vhost-user devices the disconnect event should not break the
migration process, because:
- the device will be in the stopped state, so it will not be changed
during migration
- if reconnect will be made the migration log will be reinitialized as
part of reconnect/init process:
#0 vhost_log_global_start (listener=0x563989cf7be0)
at hw/virtio/vhost.c:920
#1 0x000056398603d8bc in listener_add_address_space (listener=0x563989cf7be0,
as=0x563986ea4340 <address_space_memory>)
at softmmu/memory.c:2664
#2 0x000056398603dd30 in memory_listener_register (listener=0x563989cf7be0,
as=0x563986ea4340 <address_space_memory>)
at softmmu/memory.c:2740
#3 0x0000563985fd6956 in vhost_dev_init (hdev=0x563989cf7bd8,
opaque=0x563989cf7e30, backend_type=VHOST_BACKEND_TYPE_USER,
busyloop_timeout=0)
at hw/virtio/vhost.c:1385
#4 0x0000563985f7d0b8 in vhost_user_blk_connect (dev=0x563989cf7990)
at hw/block/vhost-user-blk.c:315
#5 0x0000563985f7d3f6 in vhost_user_blk_event (opaque=0x563989cf7990,
event=CHR_EVENT_OPENED)
at hw/block/vhost-user-blk.c:379
Update the vhost-user-blk device with the internal started_vu field which
will be used for initialization (vhost_user_blk_start) and clean up
(vhost_user_blk_stop). This additional flag in the VhostUserBlk structure
will be used to track whether the device really needs to be stopped and
cleaned up on a vhost-user level.
The disconnect event will set the overall VHOST device (not vhost-user) to
the stopped state, so it can be used by the general vhost_migration_log
routine.
Such approach could be propogated to the other vhost-user devices, but
better idea is just to make the same connect/disconnect code for all the
vhost-user devices.
This migration issue was slightly discussed earlier:
- https://lists.gnu.org/archive/html/qemu-devel/2020-05/msg01509.html
- https://lists.gnu.org/archive/html/qemu-devel/2020-05/msg05241.html
Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <9fbfba06791a87813fcee3e2315f0b904cc6789a.1599813294.git.dimastep@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Unfortunately, a typo sneeked in: we want to set
auto_enable_numa_with_memdev to false, not auto_enable_numa_with_memhp.
Cc: qemu-stable@nongnu.org # v5.1
Fixes: 195784a0cf (numa: Auto-enable NUMA when any memory devices are possible)
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200820094828.30348-1-david@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If error occurs while processing the virtio request we should call
'virtqueue_detach_element' to detach the element from the virtqueue
before free the elem.
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200816142245.17556-1-liq3ea@163.com>
Fixes: 910b25766b ("virtio-mem: Paravirtualized memory hot(un)plug")
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To speed up the memory mapping updating between vhost-vDPA and vDPA
device driver, this patch passes the IOTLB batching flags via IOTLB
API. Two new flags was introduced, VHOST_IOTLB_BATCH_BEGIN is a hint
that a bathced IOTLB updating may be initiated from the
userspace. VHOST_IOTLB_BATCH_END is a hint that userspace has finished
the updating:
VHOST_IOTLB_BATCH_BEGIN
VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE
...
VHOST_IOTLB_BATCH_END
Vhost-vDPA can then know that all mappings has been set and can do
optimization like passing all the mappings to the vDPA device driver.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20200907104903.31551-4-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch tries to switch to use new kernel IOTLB format V2. Previous
version may have inconsistent ABI between 32bit and 64bit machines
because of the hole after type field. Refer kernel commit
("429711aec282 vhost: switch to use new message format") for more
information.
To enable this feature, qemu need to use a new ioctl
VHOST_SET_BACKEND_FEATURE with VHOST_BACKEND_F_IOTLB_MSG_V2 bit. A new
vhost setting backend features ops was introduced. And when we try to
set features for vhost dev, we will examine the support of new IOTLB
format and enable it. This process is total transparent to guest,
which means we can have different IOTLB message type in src and dst
during migration.
The conversion of IOTLB message is straightforward, just check the
type and behave accordingly.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20200907104903.31551-3-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Update against Linux 5.9-rc4.
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20200907104903.31551-2-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
and one for removing unused address variables from load_elf.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAl9wl2IACgkQIeENKd+X
cFSN7gf8CtertCR9QCXELwY/4qOZq5/yLBX1cQkNYMGrkZ9n3hpGUifHBnmKvNkH
VvhhuJAX0BnSftSaSSlWezFdwn/hwTRiVYaLnTC/sLrv3hBgoAqykKIDS1ncAgGx
U7VwZH0oQVhQjBzMeYYMOhIwyOFeY1+5Odhs1uuyzHZ7qBGbtm+1EDrG4hXHJNBj
oQnqtr093SzpR20uPQo1Dm1+6aF9Iw/9Kb8jBAChduTF0uEVvbl/WEtUB/7r+Dme
ishAtZi4OxVJCZhDLlIAUM/4lsLv32OPcD5JjKlZpPBnziZg1jubI1nhVGnWY1g+
m+b9MjNrZ7u1jgegLng3c+SvAxAd2Q==
=Ma9R
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-register-20200927' into staging
Two small patches. One with a fix for the register API instance_size
and one for removing unused address variables from load_elf.
# gpg: Signature made Sun 27 Sep 2020 14:45:06 BST
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-register-20200927:
core/register: Specify instance_size in the TypeInfo
load_elf: Remove unused address variables from callers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Several callers of load_elf() pass pointers for lowaddr and highaddr
parameters which are then not used for anything. This may stem from a
misunderstanding that load_elf need a value here but in fact it can
take NULL to ignore these values. Remove such unused variables and
pass NULL instead from callers that don't need these.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20200705174020.BDD0174633F@zero.eik.bme.hu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Chuan Zheng's Dirtyrate and TLS changes, with small fixes from Dov and
Luarent.
Small virtiofs changes from Harry, Stefan, Vivek and Jiachen.
One HMP/monitor rework from me.
-----BEGIN PGP SIGNATURE-----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=ZZ1o
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20200925a' into staging
Migration and virtiofsd pull
Chuan Zheng's Dirtyrate and TLS changes, with small fixes from Dov and
Luarent.
Small virtiofs changes from Harry, Stefan, Vivek and Jiachen.
One HMP/monitor rework from me.
# gpg: Signature made Fri 25 Sep 2020 13:03:50 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20200925a: (26 commits)
virtiofsd: Add -o allow_direct_io|no_allow_direct_io options
virtiofsd: Used glib "shared" thread pool
virtiofsd: document cache=auto default
monitor: Use LOCK_GUARD macros
migration/tls: add trace points for multifd-tls
migration/tls: add support for multifd tls-handshake
migration/tls: extract cleanup function for common-use
migration/tls: add tls_hostname into MultiFDSendParams
migration/tls: extract migration_tls_client_create for common-use
migration/tls: save hostname into MigrationState
migration: increase max-bandwidth to 128 MiB/s (1 Gib/s)
migration: Truncate state file in xen-save-devices-state
migration/dirtyrate: Add trace_calls to make it easier to debug
migration/dirtyrate: Implement qmp_cal_dirty_rate()/qmp_get_dirty_rate() function
migration/dirtyrate: Implement calculate_dirtyrate() function
migration/dirtyrate: Implement set_sample_page_period() and is_sample_period_valid()
migration/dirtyrate: skip sampling ramblock with size below MIN_RAMBLOCK_SIZE
migration/dirtyrate: Compare page hash results for recorded sampled page
migration/dirtyrate: Record hash results for each sampled page
migration/dirtyrate: move RAMBLOCK_FOREACH_MIGRATABLE into ram.h
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Due to the commit 65da453980, the O_DIRECT
open flag of guest applications will be discarded by virtiofsd. While
this behavior makes it consistent with the virtio-9p scheme when guest
applications use direct I/O, we no longer have any chance to bypass the
host page cache.
Therefore, we add a flag 'allow_direct_io' to lo_data. If '-o
no_allow_direct_io' option is added, or none of '-o allow_direct_io' or
'-o no_allow_direct_io' is added, the 'allow_direct_io' will be set to
0, and virtiofsd discards O_DIRECT as before. If '-o allow_direct_io'
is added to the starting command-line, 'allow_direct_io' will be set to
1, so that the O_DIRECT flags will be retained and host page cache can
be bypassed.
Signed-off-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200824105957.61265-1-zhangjiachen.jaycee@bytedance.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
glib offers thread pools and it seems to support "exclusive" and "shared"
thread pools.
https://developer.gnome.org/glib/stable/glib-Thread-Pools.html#g-thread-pool-new
Currently we use "exlusive" thread pools but its performance seems to be
poor. I tried using "shared" thread pools and performance seems much
better. I posted performance results here.
https://www.redhat.com/archives/virtio-fs/2020-September/msg00080.html
So lets switch to shared thread pools. We can think of making it optional
once somebody can show in what cases exclusive thread pools offer better
results. For now, my simple performance tests across the board see
better results with shared thread pools.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Message-Id: <20200921213216.GE13362@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
With seccomp fix from Miklos
The virtiofsd --help output documents the cache=auto default value but
the man page does not. Fix this.
Signed-off-by: Harry G. Coin <hgcoin@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200916112250.760245-1-stefanha@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Use the lock guard macros in monitor/misc.c - saves
a lot of unlocks in error paths, and the occasional goto.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200922095741.101911-1-dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
add trace points for multifd-tls for debug.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <1600139042-104593-7-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Similar like migration main thread, we need to do handshake
for each multifd thread.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <1600139042-104593-6-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
multifd channel cleanup is need if multifd handshake failed,
let's extract it.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <1600139042-104593-5-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Since multifd creation is async with migration_channel_connect, we should
pass the hostname from MigrationState to MultiFDSendParams.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Message-Id: <1600139042-104593-4-git-send-email-zhengchuan@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
migration_tls_client_create will be used in multifd-tls, let's
extract it.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <1600139042-104593-3-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
hostname is need in multifd-tls, save hostname into MigrationState.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Message-Id: <1600139042-104593-2-git-send-email-zhengchuan@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
max-bandwidth is set by default to 32 MiB/s (256 Mib/s)
since 2008 (5bb7910af0).
Most of the CPUs can dirty memory faster than that now,
and this is clearly a problem with POWER where the page
size is 64 kiB and not 4 KiB.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200921144957.979989-1-lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When running the xen-save-devices-state QMP command, if the filename
already exists it will be truncated before dumping the devices' state
into it.
Signed-off-by: Dov Murik <dovmurik@linux.vnet.ibm.com>
Message-Id: <20200921094830.114028-1-dovmurik@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add trace_calls to make it easier to debug
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <1600237327-33618-13-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Implement qmp_cal_dirty_rate()/qmp_get_dirty_rate() function which could be called
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Message-Id: <1600237327-33618-12-git-send-email-zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
atomic function fixup
Wording fixup in migration.json based on Eric's review
Implement calculate_dirtyrate() function.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: YanYing Zhuang <ann.zhuangyanying@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-11-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Implement is_sample_period_valid() to check if the sample period is vaild and
do set_sample_page_period() to sleep specific time between sample actions.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-10-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In order to sample real RAM, skip ramblock with size below MIN_RAMBLOCK_SIZE
which is set as 128M.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-9-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Compare page hash results for recorded sampled page.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: YanYing Zhuang <ann.zhuangyanying@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-8-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Record hash results for each sampled page, crc32 is taken to calculate
hash results for each sampled length in TARGET_PAGE_SIZE.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: YanYing Zhuang <ann.zhuangyanying@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-7-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
RAMBLOCK_FOREACH_MIGRATABLE is need in dirtyrate measure,
move the existing definition up into migration/ram.h
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-6-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add dirtyrate statistics functions to record/update dirtyrate info.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-5-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add RamblockDirtyInfo to store sampled page info of each ramblock.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-4-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
add DirtyRateStatus to denote calculating status.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-3-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
atomic name fixup
Add get_dirtyrate_thread() functions to setup query-dirtyrate
framework.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: YanYing Zhuang <ann.zhuangyanying@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-2-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We duplicated the logic of maintaining the last_rb variable at both callers of
this function. Pass *rb pointer into the function so that we can avoid
duplicating the logic. Also, when we have the rb pointer, it's also easier to
remove the original 2nd & 4th parameters, because both of them (name of the
ramblock when needed, or the page size) can be fetched from the ramblock
pointer too.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200908203022.341615-3-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In migration_incoming_state_destroy(), we've got a few variables that aren't
destroyed properly, namely:
main_thread_load_event
postcopy_pause_sem_dst
postcopy_pause_sem_fault
rp_mutex
Destroy them properly.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200908203022.341615-2-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
lm32 and unicore32 are softmmut targets, and not linux-user targets.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200923080015.77373-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
timer_mod_anticipate() will be scaled to the timer unit,
which is not always nanosecond. Fix the documentation.
Fixes: add40e9777 ("timer: add timer_mod_anticipate*")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200920155042.400737-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
in vhost_vdpa_listener_region_del(), try_unmap is always true and so,
vhost_vdpa_dma_unmap() is always called. We can remove the variable
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <20200920152024.860172-1-lvivier@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Pankaj Gupta
Eric Auger
Igor Mammedov
Dima Stepanov
David Hildenbrand
Li Qiang
Jason Wang
Peter Maydell
Alistair Francis
BALATON Zoltan
Jiachen Zhang
Vivek Goyal
Harry G. Coin
Dr. David Alan Gilbert
Chuan Zheng
Laurent Vivier
Dov Murik
Peter Xu
Thomas Huth
Philippe Mathieu-Daudé