Since QEMU 2.1, we are allocating more space for ACPI tables, so no
space is left after initrd for the BIOS to allocate memory.
Besides ACPI tables, there are a few other uses of high memory in
SeaBIOS: SMBIOS tables and USB drivers use it in particular. These uses
allocate a very small amount of memory. Malloc metadata also lives
there. So we need _some_ extra padding there to avoid initrd breakage,
but not much.
John Snow found a case where RHEL5 was broken by the recent change to
ACPI_TABLE_SIZE; in his case 4KB of extra padding are fine, but just to
be safe I am adding 32KB, which is roughly the same amount of padding
that was left by QEMU 2.0 and earlier.
Move initrd to leave some space for the BIOS.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Current support for bus master (clearing OK bit)
together with the need to support guests which do not
enable PCI bus mastering, leads to extra state in
VIRTIO_PCI_FLAG_BUS_MASTER_BUG bit, which isn't robust
in case of cross-version migration for the case when
guests use the device before setting DRIVER_OK.
Rip out VIRTIO_PCI_FLAG_BUS_MASTER_BUG and implement a simpler
work-around: treat clearing of PCI_COMMAND as a virtio reset. Old
guests never touch this bit so they will work.
As reset clears device status, DRIVER and MASTER bits are
now in sync, so we can fix up cross-version migration simply
by synchronising them, without need to detect a buggy guest
explicitly.
Drop tracking VIRTIO_PCI_FLAG_BUS_MASTER_BUG completely.
As reset makes the device quiescent, in the future we'll be able to drop
checking OK bit in a bunch of places.
Cc: Jason Wang <jasowang@redhat.com>
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Header length check should happen only if backend is kernel. For user
backend there is no reason to reset this bit.
vhost-user code does not define .has_vnet_hdr_len so
VIRTIO_NET_F_MRG_RXBUF cannot be negotiated even if both sides
support it.
Signed-off-by: Damjan Marion <damarion@cisco.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
commit cc943c36fa
pci: Use bus master address space for delivering MSI/MSI-X messages
breaks virtio-net for rhel6.[56] x86 guests because they don't
enable bus mastering for virtio PCI devices. For the same reason,
rhel6.[56] ppc64 guests cannot boot on a virtio-blk disk anymore.
Old guests forgot to enable bus mastering, enable it automatically on
DRIVER (guests use some devices before DRIVER_OK).
Reported-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit a1bc7b827e422e1ff065640d8ec5347c4aadfcd8.
virtio: don't call device on !vm_running
It turns out that virtio net assumes that vm_running
is updated before device status callback in many places,
so this change leads to asserts.
Previous commit fixes the root issue that motivated
a1bc7b827e422e1ff065640d8ec5347c4aadfcd8 differently,
so there's no longer a need for this change.
In the future, we might be able to drop checking vm_running
completely, and check vm state directly.
Reported-by: Dietmar Maurer <dietmar@proxmox.com>
Cc: qemu-stable@nongnu.org
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
On vm stop, vm_running state set to stopped
before device is notified, so callbacks can get envoked with
vm_running = false; and this is not an error.
Cc: qemu-stable@nongnu.org
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 5e490b6a50.
Cc: qemu-stable@nongnu.org
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently GlobalProperty.not_used=false has multiple meanings:
* It may be a property for a hotpluggable device, which may or may not
have been used by a device;
* It may be a machine-type-provided property, which may or may not have
been used by a device.
* It may be a user-provided property that was actually not used by
any device.
Simplify the logic by having two separate fields: 'user_provided' and
'used'. This allows the entire global property validation logic to be
contained in a single function, and allows more specific error messages.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ensure no warning will be printed for hotpluggable types, and warnings
will be printed for non-device types.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will ensure we are actually testing the code which sets
not_used=false when the property is used.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are multiple reasons for running the global property tests on a
subprocess:
* We need the global_props lists to be empty for each test case, so
global properties from the previous test won't affect the next one;
* We don't want the qdev_prop_check_global() warnings to pollute test
output;
* With a subprocess, we can ensure qdev_prop_check_global() is printing
the warning messages it should.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
follow-up patch moves global property tests to subprocesses.
Unfortunately with old glib this causes:
tests/test-qdev-global-props.c: In function
‘test_static_prop’:
tests/test-qdev-global-props.c:80:5: error: implicit
declaration of function ‘g_test_trap_subprocess’
[-Werror=implicit-function-declaration]
tests/test-qdev-global-props.c:80:5: error: nested extern
declaration of ‘g_test_trap_subprocess’ [-Werror=nested-externs]
This function was only added in glib 2.38, and our
minimum version is 2.12.
To fix, disable the test for glib < 2.38.
Apply before that patch to avoid breaking bisect.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces cpu_set_fpuc() function, which changes fpuc field
of the CPU state and calls update_fp_status() function.
These calls update status of softfloat library and prevent bugs caused
by non-coherent rounding settings of the FPU and softfloat.
v2 changes:
* Added missed calls and intoduced setter function (as suggested by TeLeMan)
Reviewed-by: TeLeMan <geleman@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
we currently have the Nagle algorithm enabled for all outgoing VNC updates.
This may delay sensitive updates as mouse movements or typing in the console.
As we currently prepare all data in a buffer and then send as much as we can
disabling the Nagle algorithm should not cause big trouble. Well established
VNC servers like TightVNC set TCP_NODELAY as well.
A regular framebuffer update request generates exactly one framebuffer update
which should be pushed out as fast as possible.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Now we have removed the legacy register_char_driver() we can
rename register_char_driver_qapi() to the more obvious and
shorter name.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1409653457-27863-6-git-send-email-peter.maydell@linaro.org
Now that all the char backends have been converted to the QAPI
framework we can remove the machinery for handling old style
backends.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1409653457-27863-5-git-send-email-peter.maydell@linaro.org
Currently you can specify whether you want a UDP chardev backend
to be IPv4 or IPv6 using the ipv4 or ipv6 options if you use the
QemuOpts parsing code in inet_dgram_opts(). However the QMP struct
parsing code in socket_dgram() doesn't provide this flexibility
(which in turn prevents us from converting the UDP backend handling
to the new style QAPI framework).
Use the existing inet_addr_to_opts() function to convert the
remote->inet address to option strings; this handles ipv4 and
ipv6 flags as well as host and port. (It will also convert any
'to' specification, which is harmless as it is ignored in this
context.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1409653457-27863-3-git-send-email-peter.maydell@linaro.org
Convert the socket char backend to the new style QAPI framework;
this allows it to return an Error ** to callers who might not
want it to print directly about socket failures.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1409653457-27863-2-git-send-email-peter.maydell@linaro.org
Convert into trace event. Otherwise the message
dma: unregistered DMA channel used nchan=0 dma_pos=0 dma_len=1
gets printed every time and fills up the log-file with 50 MiB / minute.
Signed-off-by: Philipp Hahn <hahn@univention.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we migrate we ask the kernel about its current belief on what the guest
time would be. However, I've seen cases where the kvmclock guest structure
indicates a time more recent than the kvm returned time.
To make sure we never go backwards, calculate what the guest would have seen as time at the point of migration and use that value instead of the kernel returned one when it's more recent.
This bases the view of the kvmclock after migration on the
same foundation in host as well as guest.
Signed-off-by: Alexander Graf <agraf@suse.de>
Cc: qemu-stable@nongnu.org
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ensure proper env->tsc value for kvmclock_current_nsec calculation.
Reported-by: Marcin Gibuła <m.gibula@beyond.pl>
Analyzed-by: Marcin Gibuła <m.gibula@beyond.pl>
Cc: qemu-stable@nongnu.org
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_pit is running in kmod. kvm_pit is going to inject
interrupt to vm before cpu_synchronize_all_post_init at
dest side. vcpu will lose the pit interrupt, but
ack_irq(in kmod) has been 0. ack_irq become 1 after
vcpu responds pit interrupt. pit interruptcan inject
to vm when ack_irq is 1.
By the way, kvm_pit_vm_state_change has save and load
state of pit, so pre_save and post_load is unnecessary.
Signed-off-by: ChenLiang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't call SPICE API directly to set password given in command line, but
use the internal API, saving password for later calls.
This solves losing password when changing expiration in qemu monitor.
https://bugzilla.redhat.com/show_bug.cgi?id=1138639
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=3He1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches
# gpg: Signature made Fri 12 Sep 2014 16:09:43 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (22 commits)
qcow2: Add falloc and full preallocation option
raw-posix: Add falloc and full preallocation option
qapi: introduce PreallocMode and new PreallocModes full and falloc.
block: don't convert file size to sector size
block: round up file size to nearest sector
iotests: Send the correct fd in socket_scm_helper
blockdev: Refuse to drive_del something added with blockdev-add
block: extend BLOCK_IO_ERROR with reason string
dataplane: fix virtio_blk_data_plane_create() op blocker error path
qemu-iotests: Run 025 for Archipelago block driver
block/archipelago: Implement bdrv_truncate()
block: Make the block accounting functions operate on BlockAcctStats
block: rename BlockAcctType members to start with BLOCK_ instead of BDRV_
block: Extract the block accounting code
block: Extract the BlockAcctStats structure
IDE: MMIO IDE device control should be little endian
thread-pool: Drop unnecessary includes
xen: Drop redundant bdrv_close() from pci_piix3_xen_ide_unplug()
xen_disk: Plug memory leak on error path
qemu-io: Clean up openfile() after commit 2e40134
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
commit a93a3af9 introduces use of PIXMAN_TYPE_RGBA, but it's only available
in pixman >= 0.21.8. If pixman doesn't meet the version requirement, qemu
will fail to build with following message:
qemu/ui/qemu-pixman.c: In function ‘qemu_pixelformat_from_pixman’:
qemu/ui/qemu-pixman.c:42: error: ‘PIXMAN_TYPE_RGBA’ undeclared (first use in this function)
qemu/ui/qemu-pixman.c:42: error: (Each undeclared identifier is reported only once
qemu/ui/qemu-pixman.c:42: error: for each function it appears in.)
This patch fixes the problem by checking the pixman version.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
commit a93a3af9 introduces use of PIXMAN_TYPE_RGBA, but it's only available
in pixman >= 0.21.8. Although commit f27b2e1d bumped pixman to pixman-0.28.2,
but the change was reverted later by 7b1b5d19.
This patch updates internal copy of pixman to pixman-0.32.6 to fix the
problem.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Cc: qemu-stable@nongnu.org
- Build: fixing block/iscsi.so and ranlib warnings on Mac OS X
- Migration fixes for x86
- The odd KVM patch.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=GIKW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- Memory: improve error reporting and avoid crashes on hotplug
- Build: fixing block/iscsi.so and ranlib warnings on Mac OS X
- Migration fixes for x86
- The odd KVM patch.
# gpg: Signature made Thu 11 Sep 2014 11:21:10 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream: (21 commits)
gdbstub: init mon_chr through qemu_chr_alloc
pckbd: adding new fields to vmstate
mc146818rtc: add missed field to vmstate
piix: do not set irq while loading vmstate
serial: fixing vmstate for save/restore
parallel: adding vmstate for save/restore
fdc: adding vmstate for save/restore
cpu: init vmstate for ticks and clock offset
apic_common: vapic_paddr synchronization fix
vl: use QLIST_FOREACH_SAFE to visit change state handlers
exec: add parameter errp to gethugepagesize
exec: report error when memory < hpagesize
hostmem-ram: don't exit qemu if size of memory-backend-ram is way too big
memory: add parameter errp to memory_region_init_rom_device
memory: add parameter errp to memory_region_init_ram
exec: add parameter errp to qemu_ram_alloc and qemu_ram_alloc_from_ptr
rules.mak: Fix DSO build by pulling in archive symbols
util: Don't link host-utils.o if it's empty
util: Move general qemu_getauxval to util/getauxval.c
trace: Only link generated-tracers.o with "simple" backend
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If memory allocation fails when using the -mem-prealloc command-line
option, QEMU exits without printing any error information to
the user:
# qemu [...] -m 1G -mem-prealloc -mem-path /dev/hugepages
# echo $?
1
This commit adds an error message, so that we print instead:
# qemu [...] -m 1G -mem-prealloc -mem-path /dev/hugepages
qemu: unable to map backing store for hugepages: Cannot allocate memory
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
error: 'i' undeclared (first use in this function)
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
* add "linux,stdout-path" to the virt DTB
* fix a long standing bug with IRQ disabling on Cortex-M CPUs
* implement input interrupt logic in the PL061
* fix failure to load correct SP/PC on reset of Cortex-M CPUs
if the vector table is not in a ROM-blob-in-RAM
* provide flash devices for boot ROMs in the virt board
* implement architectural watchpoints
* fix misimplementation of Inner Shareable TLB operations that
caused instability of guests in TCG SMP configurations
* configure PL011 and PL031 in the virt board correctly with
level-triggered interrupts rather than edge-triggered
* support providing a device tree blob to ROM (firmware)
images as well as to kernels
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=rSwB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20140912' into staging
target-arm:
* add "linux,stdout-path" to the virt DTB
* fix a long standing bug with IRQ disabling on Cortex-M CPUs
* implement input interrupt logic in the PL061
* fix failure to load correct SP/PC on reset of Cortex-M CPUs
if the vector table is not in a ROM-blob-in-RAM
* provide flash devices for boot ROMs in the virt board
* implement architectural watchpoints
* fix misimplementation of Inner Shareable TLB operations that
caused instability of guests in TCG SMP configurations
* configure PL011 and PL031 in the virt board correctly with
level-triggered interrupts rather than edge-triggered
* support providing a device tree blob to ROM (firmware)
images as well as to kernels
# gpg: Signature made Fri 12 Sep 2014 14:19:08 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20140912: (23 commits)
hw/arm/boot: enable DTB support when booting ELF images
hw/arm/boot: load device tree to base of DRAM if no -kernel option was passed
hw/arm/boot: pass an address limit to and return size from load_dtb()
hw/arm/boot: load DTB as a ROM image
hw/arm/virt: fix pl011 and pl031 irq flags
target-arm: Make *IS TLB maintenance ops affect all CPUs
target-arm: Push legacy wildcard TLB ops back into v6
target-arm: Implement minimal DBGVCR, OSDLR_EL1, MDCCSR_EL0
target-arm: Remove comment about MDSCR_EL1 being dummy implementation
target-arm: Set DBGDSCR.MOE for debug exceptions taken to AArch32
target-arm: Implement handling of fired watchpoints
target-arm: Move extended_addresses_enabled() to internals.h
target-arm: Implement setting of watchpoints
cpu-exec: Make debug_excp_handler a QOM CPU method
exec.c: Record watchpoint fault address and direction
exec.c: Provide full set of dummy wp remove functions in user-mode
exec.c: Relax restrictions on watchpoint length and alignment
hw/arm/virt: Provide flash devices for boot ROMs
target-arm: Fix broken indentation in arm_cpu_reest()
target-arm: Fix resetting issues on ARMv7-M CPUs
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
preallocation=falloc allocates disk space by posix_fallocate(),
preallocation=full allocates disk space by writing zeros to disk.
Both modes imply preallocation=metadata.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds a new option preallocation for raw format, and implements
falloc and full preallocation.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch prepares for the subsequent patches.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
and avoid converting it back later.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently the file size requested by user is rounded down to nearest
sector, causing the actual file size could be a bit less than the size
user requested. Since some formats (like qcow2) record virtual disk
size in bytes, this can make the last few bytes cannot be accessed.
This patch fixes it by rounding up file size to nearest sector so that
the actual file size is no less than the requested file size.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add support for loading DTB images when booting ELF images using
-kernel. If there are no conflicts with the placement of the ELF
segments, the DTB image is loaded at the base of RAM.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 1410453915-9344-5-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If we are running the 'virt' machine, we may have a device tree blob but no
kernel to supply it to if no -kernel option was passed. In that case, copy it
to the base of RAM where it can be picked up by a bootloader.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 1410453915-9344-4-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
