Commit Graph

52 Commits

Author SHA1 Message Date
Max Reitz f7d9fd8c72 block: Remove bdrv_open_image()'s force_raw option
This option is now unnecessary since specifying BDRV_O_PROTOCOL as flag
will do exactly the same.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21 21:02:22 +01:00
Max Reitz f67503e5bd block: Change BDS parameter of bdrv_open() to **
Make bdrv_open() take a pointer to a BDS pointer, similarly to
bdrv_file_open(). If a pointer to a NULL pointer is given, bdrv_open()
will create a new BDS with an empty name; if the BDS pointer is not
NULL, that existing BDS will be reused (in the same way as bdrv_open()
already did).

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21 21:02:21 +01:00
Markus Armbruster 84d18f065f Use error_is_set() only when necessary
error_is_set(&var) is the same as var != NULL, but it takes
whole-program analysis to figure that out.  Unnecessarily hard for
optimizers, static checkers, and human readers.  Dumb it down to
obvious.

Gets rid of several dozen Coverity false positives.

Note that the obvious form is already used in many places.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-17 11:57:23 -05:00
Kevin Wolf eaf944a438 blkdebug: Don't leak bs->file on failure
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2014-02-09 09:12:39 +01:00
Kevin Wolf 9e1cb96d9a qemu-iotests: Test pwritev RMW logic
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-01-24 17:40:25 +01:00
Kevin Wolf b35ee7fb23 blkdebug: Make required alignment configurable
The new 'align' option of blkdebug can be used in order to emulate
backends with a required 4k alignment on hosts which only really require
512 byte alignment.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 17:40:03 +01:00
Max Reitz 4373593d51 blkdebug: Allow command-line file configuration
Introduce the "image" option as an alternative to specifying the image
through the filename.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:18 +01:00
Max Reitz 72daa72eee block: Allow reference for bdrv_file_open()
Allow specifying a reference to an existing block device (by name) for
bdrv_file_open() instead of a filename and/or options.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:17 +01:00
Max Reitz 89f2b21e36 blkdebug: Use command-line in read_config()
Use qemu_config_parse_qdict() to parse the command-line options in
addition to the config file.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:17 +01:00
Max Reitz 85a040e548 blkdebug: Always call read_config()
Move the check whether there actually is a config file into the
read_config() function.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:17 +01:00
Max Reitz d4881b9bcb blkdebug: Don't require sophisticated filename
If the filename is not prefixed by "blkdebug:" in
blkdebug_parse_filename(), the blkdebug driver was not selected through
that protocol prefix, but by an explicit command line option
(file.driver=blkdebug or something similar). Contrary to the current
reaction, this is not a problem at all; we just need to store the
filename (in the x-image option) and can go on; the user just has to
manually specify the config option.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:17 +01:00
Max Reitz 466b49f276 blkdebug: Use errp for read_config()
Use an Error variable in the read_config() function.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:17 +01:00
Peter Crosthwaite 87ea75d5e1 qemu-option: Remove qemu_opts_create_nofail
This is a boiler-plate _nofail variant of qemu_opts_create. Remove and
use error_abort in call sites.

null/0 arguments needs to be added for the id and fail_if_exists fields
in affected callsites due to argument inconsistency between the normal and
no_fail variants.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-01-06 15:02:30 -05:00
Fam Zheng c547e5640d blkdebug: Use QLIST_FOREACH_SAFE to resume IO
Qemu-iotest 030 was broken.

When the coroutine runs and finishes, it will remove itself from the req
list, so let's use safe version of foreach to avoid use after free.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-12-13 17:11:19 +01:00
Fam Zheng 4cc70e9337 blkdebug: add "remove_break" command
This adds "remove_break" command which is the reverse of blkdebug
command "break": it removes all breakpoints with given tag and resumes
all the requests.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-11-29 13:40:37 +01:00
Max Reitz 10ffa72fae blkdebug: Employ error parameter
Make use of the error parameter in blkdebug_open.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-10-11 16:50:00 +02:00
Max Reitz 34b5d2c68e block: Error parameter for open functions
Add an Error ** parameter to bdrv_open, bdrv_file_open and associated
functions to allow more specific error messages.

Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-12 10:12:48 +02:00
Max Reitz 015a1036a7 bdrv: Use "Error" for opening images
Add an Error ** parameter to BlockDriver.bdrv_open and
BlockDriver.bdrv_file_open to allow more specific error messages.

Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-12 10:12:47 +02:00
Max Reitz afa50193cd qcow2-refcount: Repair shared refcount blocks
If the refcount of a refcount block is greater than one, we can at least
try to repair that problem by duplicating the affected block.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-02 10:06:59 +02:00
Kevin Wolf bf736fe34c blkdebug: Add BLKDBG_FLUSH_TO_OS/DISK events
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06 11:27:22 +02:00
Kevin Wolf 56d1b4d21d block: Remove filename parameter from .bdrv_file_open()
It is unused now in all block drivers.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-04-22 11:34:35 +02:00
Kevin Wolf f468121290 blkdebug: Use bdrv_open options instead of filename
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-04-22 10:27:59 +02:00
Kevin Wolf 787e4a8500 block: Add options QDict to bdrv_file_open() prototypes
The new parameter is unused yet.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-03-22 17:51:31 +01:00
Paolo Bonzini 1de7afc984 misc: move include files to include/qemu/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:32:39 +01:00
Paolo Bonzini 737e150e89 block: move include files to include/block/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:31:31 +01:00
Paolo Bonzini 077805fa92 janitor: do not rely on indirect inclusions of or from qemu-char.h
Various header files rely on qemu-char.h including qemu-config.h or
main-loop.h, but they really do not need qemu-char.h at all (particularly
interesting is the case of the block layer!).  Clean this up, and also
add missing inclusions of qemu-char.h itself.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:29:52 +01:00
Kevin Wolf 3c90c65d7a blkdebug: Implement suspend/resume of AIO requests
This allows more systematic AIO testing. The patch adds three new
operations to blkdebug:

 * Setting a "breakpoint" on a blkdebug event. The next request that
   triggers this breakpoint is suspended and is tagged with a name.
   The breakpoint is removed after a request has triggered it.

 * A suspended request (identified by it's tag) can be resumed

 * It's possible to check whether a suspended request with a given
   tag exists. This can be used for waiting for an event.

Ideally, we would instead tag requests right when they are created and
set breakpoints for individual requests. However, at this point the
block layer doesn't allow this easily, and breakpoints that trigger for
any request already allow a lot of useful testing.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-12-12 12:33:48 +01:00
Kevin Wolf 9e35542b0f blkdebug: Factor out remove_rule()
The cleanup work to remove a rule depends on the type of the rule. It's
easy for the existing rules as there is no data that must be cleaned up
and is specific to a type yet, but the next patch will change this.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-12-12 12:33:48 +01:00
Kevin Wolf 312a2ba0eb blkdebug: Allow usage without config file
As soon as new rules can be set during runtime, as introduced by the
next patch, blkdebug makes sense even without a config file.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-12-12 12:33:48 +01:00
Stefan Hajnoczi d7331bed11 aio: rename AIOPool to AIOCBInfo
Now that AIOPool no longer keeps a freelist, it isn't really a "pool"
anymore.  Rename it to AIOCBInfo and make it const since it no longer
needs to be modified.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-11-14 18:19:21 +01:00
Paolo Bonzini 8f96b5be92 blkdebug: process all set_state rules in the old state
Currently it is impossible to write a blkdebug script that ping-pongs
between two states, because the second set-state rule will use the
state that is set in the first.  If you have

    [set-state]
    event = "..."
    state = "1"
    new_state = "2"

    [set-state]
    event = "..."
    state = "2"
    new_state = "1"

for example the state will remain locked at 1.  This can be fixed
by first processing all rules, and then setting the state.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28 19:40:56 +02:00
Paolo Bonzini e4780db429 blkdebug: optionally tie errors to a specific sector
This makes blkdebug scripts more powerful, and independent of the
exact sequence of operations performed by streaming.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09 15:53:02 +02:00
Paolo Bonzini 571cd43e57 blkdebug: store list of active rules
This prepares for the next patch, where some active rules may actually
not trigger depending on input to readv/writev.  Store the active rules
in a SIMPLEQ (so that it can be emptied easily with QSIMPLEQ_INIT), and
fetch the errno/once/immediately arguments from there.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09 15:53:02 +02:00
Paolo Bonzini e130225587 blkdebug: pass getlength to underlying file
This is required when using blkdebug with raw format.  Unlike qcow2/QED,
raw asks blkdebug for the length of the file, it doesn't get it from
a header.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09 15:53:02 +02:00
Paolo Bonzini 368e8dd10a blkdebug: tiny cleanup
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09 15:53:02 +02:00
Paolo Bonzini 820100fd15 blkdebug: remove sync i/o events
These are unused, except (by mistake more or less) in QED.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09 15:53:02 +02:00
Paolo Bonzini 29cdb2513c block: push recursive flushing up from drivers
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-05 14:54:39 +02:00
Stefan Hajnoczi 031380d877 block: replace unchecked strdup/malloc/calloc with glib
Most of the codebase as been converted to use glib memory allocation
functions.  There are still a few instances of malloc/calloc in the
block layer and qemu-io.  Replace them, especially since they do not
check the strdup/malloc/calloc return value.

Reported-by: Dr David Alan Gilbert <davidagilbert@uk.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26 11:39:03 +01:00
Stefan Hajnoczi 6f6dc6565e block: drop redundant bdrv_flush implementation
Block drivers now only need to provide either of .bdrv_co_flush,
.bdrv_aio_flush() or for legacy drivers .bdrv_flush().  Remove
the redundant .bdrv_flush() implementations.

[Paolo Bonzini: change raw driver to bdrv_co_flush]

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-21 17:34:13 +02:00
Anthony Liguori 7267c0947d Use glib memory allocation and free functions
qemu_malloc/qemu_free no longer exist after this commit.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-20 23:01:08 -05:00
Kevin Wolf 205ef7961f block: Allow bdrv_flush to return errors
This changes bdrv_flush to return 0 on success and -errno in case of failure.
It's a requirement for implementing proper error handle in users of bdrv_flush.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-11-04 12:52:16 +01:00
Blue Swirl 95ee3914bf blkdebug: fix enum comparison
The signedness of enum types depend on the compiler implementation.
Therefore the check for negative values may or may not be meaningful.

Fix by explicitly casting to a signed integer.

Since the values are also checked earlier against event_names
table, this is an internal error. Change the 'if' to 'assert'.

This also avoids a warning with GCC flag -Wtype-limits.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-18 05:53:15 +00:00
Kevin Wolf 8db520cee8 blkdebug: Initialize state as 1
state = 0 in rules means that the rule is valid for any state. Therefore it's
impossible to have a rule that works only in the initial state. This changes
the initial state from 0 to 1 to make this possible.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02 13:18:02 +02:00
Kevin Wolf 698f0d52cd blkdebug: Free QemuOpts after having read the config
Forgetting to free them means that the next instance inherits all rules and
gets its own rules only additionally.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02 13:18:02 +02:00
Kevin Wolf 327cdad416 blkdebug: Fix set_state_opts definition
The list head was initialized to point to the wrong list, so all actions ended
up being handled as inject-error even if they were set-state in fact.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02 13:18:02 +02:00
Paul Brook 11165820d1 Move stdbool.h
Move inclusion of stdbool.h to common header files, instead of including
in an ad-hoc manner.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-06-13 19:00:50 +01:00
Kevin Wolf b666d23950 block: Avoid unchecked casts for AIOCBs
Use container_of for one direction and &acb->common for the other one.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-17 10:20:05 +02:00
Kevin Wolf 66f82ceed6 block: Open the underlying image file in generic code
Format drivers shouldn't need to bother with things like file names, but rather
just get an open BlockDriverState for the underlying protocol. This patch
introduces this behaviour for bdrv_open implementation. For protocols which
need to access the filename to open their file/device/connection/... a new
callback bdrv_file_open is introduced which doesn't get an underlying file
opened.

For now, also some of the more obscure formats use bdrv_file_open because they
open() the file themselves instead of using the block.c functions. They need to
be fixed in later patches.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-03 10:07:30 +02:00
Kevin Wolf 8252278afb qcow2: Trigger blkdebug events
This adds blkdebug events to qcow2 to allow injecting I/O errors in specific
places.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-04-23 16:08:46 +02:00
Kevin Wolf 8b9b0cc2fd blkdebug: Add events and rules
Block drivers can trigger a blkdebug event whenever they reach a place where it
could be useful to inject an error for testing/debugging purposes.

Rules are read from a blkdebug config file and describe which action is taken
when an event is triggered. For now this is only injecting an error (with a few
options) or changing the state (which is an integer). Rules can be declared to
be active only in a specific state; this way later rules can distiguish on
which path we came to trigger their event.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-04-23 16:08:46 +02:00