Commit Graph

903 Commits

Author SHA1 Message Date
Peter Maydell 336cfef495 Makefile: Don't install non-sphinx files in sphinx docs install
If we're doing an out-of-tree build of Sphinx, then we
copy some extra spurious files to the install directory
as part of 'make install':
qemu-ga-qapi.texi
qemu-ga-ref.7
qemu-ga-ref.7.pod
qemu-ga-ref.html
qemu-ga-ref.txt
qemu-qmp-qapi.texi
qemu-qmp-ref.7
qemu-qmp-ref.7.pod
qemu-qmp-ref.html
qemu-qmp-ref.txt

because these have been built into build/docs/interop along
with the Sphinx interop documents. Filter them out of the
set of files we install when we're installing the Sphinx-built
manual files. (They are installed into their correct locations
as part of the main install-doc target already.)

Fixes: 5f71eac06e ("Makefile, configure: Support building rST documentation")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190308135744.6480-4-peter.maydell@linaro.org
2019-03-11 11:10:44 +00:00
Peter Maydell 81f33401ef Makefile: Fix 'make distclean'
We forgot the '-r' option on the rm command to clean up the
Sphinx .doctrees working directory, which meant that
"make distclean" fails:
 rm: cannot remove '.doctrees': Is a directory

Add the missing option.

Fixes: 5f71eac06e ("Makefile, configure: Support building rST documentation")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190308135744.6480-3-peter.maydell@linaro.org
2019-03-11 11:10:44 +00:00
Peter Maydell 1290e6711f Makefile: Fix Sphinx documentation builds for in-tree builds
The Sphinx build-sphinx tool does not permit building a manual
into the same directory as its source files. This meant that
commit 5f71eac06e broke QEMU in-source-tree
builds, which would fail with:
  Error: source directory and destination directory are same.

Fix this by making in-tree builds build the Sphinx manuals
into a subdirectory of docs/.

Fixes: 5f71eac06e ("Makefile, configure: Support building rST documentation")
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190308135744.6480-2-peter.maydell@linaro.org
2019-03-11 11:10:44 +00:00
Peter Maydell 6bbbe16a02 Slirp updates
Greg Kurz (1):
   slirp: Fix build with gcc 9
 
 Marc-André Lureau (7):
   slirp: adapt a subset of QEMU vmstate code
   slirp: use libslirp migration code
   slirp: use "slirp_" prefix for inet_aton() win32 implementation
   slirp: move sources to src/ subdirectory
   slirp: add a standalone Makefile
   build-sys: link with slirp as an external project
   slirp: remove QEMU Makefile.objs
 
 Samuel Thibault (2):
   slirp: fix big/little endian conversion in ident protocol
   slirp: Mark pieces missing IPv6 support
 
 Vic Lee (1):
   slirp: check for ioctlsocket error and 0-length udp payload.
 
 William Bowling (1):
   slirp: check sscanf result when emulating ident
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE5h27FdQXK97JfpLZ21UOifD6VPMFAlyBBbgACgkQ21UOifD6
 VPNgkRAAqMf4jNHjwSeHxyDYBhban0hnsQAnq9Ttc63I1tGAM9YdnQbnGyOtdQY7
 FYllEnMLNn0pEv85e7oyHguVwphWHlL/hL5LYZ1HBWa8ttRyBKIphxw2/aOa2hw5
 QFXRzcUZ1WI91S2IPePmhoLyP7yOiuNvDESGlJC4V/IMS7ExgPr7na4/RUIBwffX
 pHpmmr/UVaXLho8+JkoeDwCyNoCuHHJ4Im73kp8oUP4vsL38lZFS53E6zWZM7mZd
 sdD1Q383UMkgJ98yog/txW8OwIJe45HC5yZ3vtIOEtvpp5hnEft/AMV27VTLV+k4
 +rIB29LtXnNRYscXoOek/bLhgzmE6FHd3KACBbR22f7N5O7B5ZeuuyYPYOasD6ol
 hUROCaX2FWOVEIFRnvADwvX2ColDFBbrzOasVxaKEFUvwSFGNFQfTo9SIHV/l1TD
 Z7/oI3/qFk197TDGpPhloDplPqf4+LoV4Mbd9LWEb9Cpgm7sR9IRZSgs3fUprsZO
 dRjiKI8WXL69y3BKWw7oQcTBGeTq1Qgw1NlsYEiATOolApYwSyexP4L1yi94oPMj
 pbwi2hUE8caIsUBSVDwoquzm7DOUWJDugYdp0Cr2IKZyE1B2oq6Acxx1KMjKBS9V
 eUagYN/g1Y38V6VLb5RxQyNzipxVbBdwumvvwT4cBCXO8Nw3Ulk=
 =iC3n
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/thibault/tags/samuel-thibault' into staging

Slirp updates

Greg Kurz (1):
  slirp: Fix build with gcc 9

Marc-André Lureau (7):
  slirp: adapt a subset of QEMU vmstate code
  slirp: use libslirp migration code
  slirp: use "slirp_" prefix for inet_aton() win32 implementation
  slirp: move sources to src/ subdirectory
  slirp: add a standalone Makefile
  build-sys: link with slirp as an external project
  slirp: remove QEMU Makefile.objs

Samuel Thibault (2):
  slirp: fix big/little endian conversion in ident protocol
  slirp: Mark pieces missing IPv6 support

Vic Lee (1):
  slirp: check for ioctlsocket error and 0-length udp payload.

William Bowling (1):
  slirp: check sscanf result when emulating ident

# gpg: Signature made Thu 07 Mar 2019 11:51:20 GMT
# gpg:                using RSA key E61DBB15D4172BDEC97E92D9DB550E89F0FA54F3
# gpg: Good signature from "Samuel Thibault <samuel.thibault@aquilenet.fr>" [unknown]
# gpg:                 aka "Samuel Thibault <sthibault@debian.org>" [marginal]
# gpg:                 aka "Samuel Thibault <samuel.thibault@gnu.org>" [unknown]
# gpg:                 aka "Samuel Thibault <samuel.thibault@inria.fr>" [marginal]
# gpg:                 aka "Samuel Thibault <samuel.thibault@labri.fr>" [marginal]
# gpg:                 aka "Samuel Thibault <samuel.thibault@ens-lyon.org>" [marginal]
# gpg:                 aka "Samuel Thibault <samuel.thibault@u-bordeaux.fr>" [unknown]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 900C B024 B679 31D4 0F82  304B D017 8C76 7D06 9EE6
#      Subkey fingerprint: E61D BB15 D417 2BDE C97E  92D9 DB55 0E89 F0FA 54F3

* remotes/thibault/tags/samuel-thibault:
  slirp: remove QEMU Makefile.objs
  build-sys: link with slirp as an external project
  slirp: add a standalone Makefile
  slirp: move sources to src/ subdirectory
  slirp: use "slirp_" prefix for inet_aton() win32 implementation
  slirp: use libslirp migration code
  slirp: adapt a subset of QEMU vmstate code
  slirp: Mark pieces missing IPv6 support
  slirp: fix big/little endian conversion in ident protocol
  slirp: check sscanf result when emulating ident
  slirp: check for ioctlsocket error and 0-length udp payload.
  slirp: Fix build with gcc 9

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-08 11:55:53 +00:00
Paolo Bonzini f349474920 minikconfig: implement allnoconfig and defconfig modes
Apart from defconfig (which is a no-op),
allyesconfig/allnoconfig/randcondfig can be implemented simply by ignoring
the RHS of assignments and "default" statements.  The RHS is replaced
respectively by "true", "false" or a random value.

However, allyesconfig and randconfig do not quite work, because all the
files for hw/ARCH/Kconfig are sourced and therefore you could end up
enabling some ARM boards in x86 or things like that.  This is left for
future work, but I am leaving it in to help debugging minikconf itself.

allnoconfig mode is tied to a new configure option, --without-default-devices.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini e0e312f352 build: switch to Kconfig
The make_device_config.sh script is replaced by minikconf, which
is modified to support the same command line as its predecessor.

The roots of the parsing are default-configs/*.mak, Kconfig.host and
hw/Kconfig.  One difference with make_device_config.sh is that all symbols
have to be defined in a Kconfig file, including those coming from the
configure script.  This is the reason for the Kconfig.host file introduced
in the previous patch. Whenever a file in default-configs/*.mak used
$(...) to refer to a config-host.mak symbol, this is replaced by a
Kconfig dependency; this part must be done already in this patch
for bisectability.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-28-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Peter Maydell 6038f5fca5 docs/conf.py: Don't hard-code QEMU version
Don't hard-code the QEMU version number into conf.py. Instead
we either pass it to sphinx-build on the command line, or
(if doing a standalone Sphinx run in a readthedocs.org setup)
extract it from the VERSION file.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190305172139.32662-12-peter.maydell@linaro.org
Message-id: 20190228145624.24885-12-peter.maydell@linaro.org
2019-03-07 14:26:47 +00:00
Peter Maydell 57b49737ae Makefile: Abstract out "identify the pkgversion" code
Abstract out the "identify the pkgversion" code from the
rule for creating qemu-version.h, so it sets makefile
variables for QEMU_PKGVERSION and QEMU_FULL_VERSION.
(We will want to use these when building the Sphinx docs.)

NB: As we abstract this out, we use -e to check for .git
rather than -d, since in some situations .git may be a file
rather than a directory.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190305172139.32662-11-peter.maydell@linaro.org
Message-id: 20190228145624.24885-11-peter.maydell@linaro.org
2019-03-07 14:26:47 +00:00
Peter Maydell 5f71eac06e Makefile, configure: Support building rST documentation
Add support to our configure and makefile machinery for building
our rST docs into HTML files.

Building the documentation now requires that sphinx-build is
available; this seems better than allowing half the docs to
be built if it is not present but having half of them missing.
(In particular it means that assuming that distros configured with
--enable-docs they'll get a helpful error from configure telling
them the new build dependency.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190305172139.32662-10-peter.maydell@linaro.org
Message-id: 20190228145624.24885-10-peter.maydell@linaro.org
2019-03-07 14:26:46 +00:00
Marc-André Lureau 675b9b5368 build-sys: link with slirp as an external project
Use the "system" libslirp if its present or requested.

Else build with a static libslirp.a if slirp/ is checked
out ("internal") or a submodule ("git").

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190212162524.31504-7-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-03-07 12:46:31 +01:00
Peter Maydell 1d31f1872b pci, pc, virtio: fixes, cleanups, tests
Lots of work on tests: BiosTablesTest UEFI app,
 vhost-user testing for non-Linux hosts.
 Misc cleanups and fixes all over the place
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJccBqMAAoJECgfDbjSjVRpvSEIAKYPRNdCBX/SSS/L/tmJS5Zt
 8IyU/HW1YJ249vO+aT6z4Q3QPgqNC3KjXC3brx/WRoPZnRroen4rv2Kqnk6SayPa
 a52d2ubXKWxb3swdG1CAVzFRhq/ABpgAPx0dr1JW+RXgo2lxpJ4GNYxKMosQTaPE
 hRNeXl1XlcIK525kJhFH3Hlij9mTRuY6T7ydpPQd8dUq2dBRaL9RrzZRrkZxCy6l
 gQPUqNzPhG0XXyOiJmwYyVX0zGzbYrMLrMQAor2SBIYmU+zv2eZGPJUYxoMTUMzt
 YR0WCpvkvPITlAryaBoozAIDYVz8PxBRT1KRwpDal+2rzlm6o+veKDiF8R46gn0=
 =GzUz
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pci, pc, virtio: fixes, cleanups, tests

Lots of work on tests: BiosTablesTest UEFI app,
vhost-user testing for non-Linux hosts.
Misc cleanups and fixes all over the place

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri 22 Feb 2019 15:51:40 GMT
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (26 commits)
  pci: Sanity test minimum downstream LNKSTA
  hw/smbios: fix offset of type 3 sku field
  pci: Move NVIDIA vendor id to the rest of ids
  virtio-balloon: Safely handle BALLOON_PAGE_SIZE < host page size
  virtio-balloon: Use ram_block_discard_range() instead of raw madvise()
  virtio-balloon: Rework ballon_page() interface
  virtio-balloon: Corrections to address verification
  virtio-balloon: Remove unnecessary MADV_WILLNEED on deflate
  i386/kvm: ignore masked irqs when update msi routes
  contrib/vhost-user-blk: fix the compilation issue
  Revert "contrib/vhost-user-blk: fix the compilation issue"
  pc-dimm: use same mechanism for [get|set]_addr
  tests/data: introduce "uefi-boot-images" with the "bios-tables-test" ISOs
  tests/uefi-test-tools: add build scripts
  tests: introduce "uefi-test-tools" with the BiosTablesTest UEFI app
  roms: build the EfiRom utility from the roms/edk2 submodule
  roms: add the edk2 project as a git submodule
  vhost-user-test: create a temporary directory per TestServer
  vhost-user-test: small changes to init_hugepagefs
  vhost-user-test: create a main loop per TestServer
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-04 11:04:31 +00:00
Daniel P. Berrange 5b76dd132c authz: add QAuthZ object as an authorization base class
The current qemu_acl module provides a simple access control list
facility inside QEMU, which is used via a set of monitor commands
acl_show, acl_policy, acl_add, acl_remove & acl_reset.

Note there is no ability to create ACLs - the network services (eg VNC
server) were expected to create ACLs that they want to check.

There is also no way to define ACLs on the command line, nor potentially
integrate with external authorization systems like polkit, pam, ldap
lookup, etc.

The QAuthZ object defines a minimal abstract QOM class that can be
subclassed for creating different authorization providers.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2019-02-26 15:25:58 +00:00
Laszlo Ersek 23858f4092 roms: add the edk2 project as a git submodule
The roms/edk2 submodule can help with three goals:
- build the OVMF and ArmVirtQemu virtual UEFI firmware platforms (to be
  implemented later),
- build the EfiRom tool on the fly, which is used in roms/Makefile, for
  building the "efirom" target,
- build UEFI test applications (to be run in guests), for qtest support.

Edk2 commit 85588389222a3636baf0f9ed8227f2434af4c3f9 stands for the latest
"stable tag", namely "edk2-stable201811".

The edk2 repository tracks some binary files that should not be removed by
QEMU's top-level "make clean"; exempt the full pathnames from the "find"
command.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20190204160325.4914-2-lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-21 12:28:41 -05:00
Markus Armbruster 88554a2005 build: Deal with all of QAPI's .o in qapi/Makefile.objs
Adding QAPI's .o to util-obj-y, common-obj-y and obj-y is spread over
three places: Makefile.objs takes care of target-independent generated
code, Makefile.target of target-dependent generated code, and
qapi/Makefile.objs of (target-independent) hand-written code.

Do everything in qapi/Makefile.objs.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190214152251.2073-8-armbru@redhat.com>
2019-02-18 14:44:04 +01:00
Markus Armbruster 5d75648b56 qapi: Generate QAPIEvent stuff into separate files
Having to include qapi-events.h just for QAPIEvent is suboptimal, but
quite tolerable now.  It'll become problematic when we have events
conditional on the target, because then qapi-events.h won't be usable
from target-independent code anymore.  Avoid that by generating it
into separate files.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190214152251.2073-6-armbru@redhat.com>
2019-02-18 14:44:04 +01:00
Viktor Prutyanov 1b9d35f33c configure: enable elf2dmp build for Windows hosts
After this patch contrib/elf2dmp can be built for Windows x86 and x86_64
hosts by mingw.

Signed-off-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Message-Id: <20181220012441.13694-7-viktor.prutyanov@phystech.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05 16:50:18 +01:00
Stefano Garzarella 2785dc7b17 optionrom: add new PVH option rom
The new pvh.bin option rom can be used with SeaBIOS to boot
uncompressed kernel using the x86/HVM direct boot ABI.

pvh.S contains the entry point of the option rom. It runs
in real mode, loads the e820 table querying the BIOS, and
then it switches to 32bit protected mode and jumps to the
pvh_load_kernel() written in pvh_main.c.
pvh_load_kernel() loads the cmdline and kernel entry_point
using fw_cfg, then it looks for RSDP, fills the
hvm_start_info required by x86/HVM ABI, and finally jumps
to the kernel entry_point.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
2019-02-05 16:50:17 +01:00
Stefan Hajnoczi 57b7bdf426 trace: rerun tracetool after ./configure changes
Autogenerated code in trace.h/trace.c and friends is specific to the
config-host.mak TRACE_BACKENDS setting and must be regenerated when
./configure --enable-trace-backend= changes settings.

This patch ensures that changes to TRACE_BACKENDS are detected.  For
example, the trace-root.h file is now updated after switching trace
backends:

  $ ./configure && make
  $ cp trace-root.h /tmp/old-trace-root.h
  $ ./configure --enable-trace-backend=simple && make
  $ diff -u /tmp/old-trace-root.h trace-root.h

Reported-by: Christophe Lyon <christophe.lyon@st.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190129025343.4788-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-01-30 10:57:03 +08:00
Daniel P. Berrangé 62dd1048c0 trace: add ability to do simple printf logging via systemtap
The dtrace systemtap trace backend for QEMU is very powerful but it is
also somewhat unfriendly to users who aren't familiar with systemtap,
or who don't need its power right now.

  stap -e "....some strange script...."

The 'log' backend for QEMU by comparison is very crude but incredibly
easy to use:

 $ qemu -d trace:qio* ...some args...
 23266@1547735759.137292:qio_channel_socket_new Socket new ioc=0x563a8a39d400
 23266@1547735759.137305:qio_task_new Task new task=0x563a891d0570 source=0x563a8a39d400 func=0x563a86f1e6c0 opaque=0x563a89078000
 23266@1547735759.137326:qio_task_thread_start Task thread start task=0x563a891d0570 worker=0x563a86f1ce50 opaque=0x563a891d9d90
 23273@1547735759.137491:qio_task_thread_run Task thread run task=0x563a891d0570
 23273@1547735759.137503:qio_channel_socket_connect_sync Socket connect sync ioc=0x563a8a39d400 addr=0x563a891d9d90
 23273@1547735759.138108:qio_channel_socket_connect_fail Socket connect fail ioc=0x563a8a39d400

This commit introduces a way to do simple printf style logging of probe
points using systemtap. In particular it creates another set of tapsets,
one per emulator:

  /usr/share/systemtap/tapset/qemu-*-log.stp

These pre-define probe functions which simply call printf() on their
arguments. The printf() format string is taken from the normal
trace-events files, with a little munging to the format specifiers
to cope with systemtap's more restrictive syntax.

With this you can now do

 $ stap -e 'probe qemu.system.x86_64.log.qio*{}'
 22806@1547735341399856820 qio_channel_socket_new Socket new ioc=0x56135d1d7c00
 22806@1547735341399862570 qio_task_new Task new task=0x56135cd66eb0 source=0x56135d1d7c00 func=0x56135af746c0 opaque=0x56135bf06400
 22806@1547735341399865943 qio_task_thread_start Task thread start task=0x56135cd66eb0 worker=0x56135af72e50 opaque=0x56135c071d70
 22806@1547735341399976816 qio_task_thread_run Task thread run task=0x56135cd66eb0

We go one step further though and introduce a 'qemu-trace-stap' tool to
make this even easier

 $ qemu-trace-stap run qemu-system-x86_64 'qio*'
 22806@1547735341399856820 qio_channel_socket_new Socket new ioc=0x56135d1d7c00
 22806@1547735341399862570 qio_task_new Task new task=0x56135cd66eb0 source=0x56135d1d7c00 func=0x56135af746c0 opaque=0x56135bf06400
 22806@1547735341399865943 qio_task_thread_start Task thread start task=0x56135cd66eb0 worker=0x56135af72e50 opaque=0x56135c071d70
 22806@1547735341399976816 qio_task_thread_run Task thread run task=0x56135cd66eb0

This tool is clever in that it will automatically change the
SYSTEMTAP_TAPSET env variable to point to the directory containing the
right set of probes for the QEMU binary path you give it. This is useful
if you have QEMU installed in /usr but are trying to test and trace a
binary in /home/berrange/usr/qemu-git. In that case you'd do

 $ qemu-trace-stap run /home/berrange/usr/qemu-git/bin/qemu-system-x86_64 'qio*'

And it'll make sure /home/berrange/usr/qemu-git/share/systemtap/tapset
is used for the trace session

The 'qemu-trace-stap' script takes a verbose arg so you can understand
what it is running

 $ qemu-trace-stap run /home/berrange/usr/qemu-git/bin/qemu-system-x86_64 'qio*'
 Using tapset dir '/home/berrange/usr/qemu-git/share/systemtap/tapset' for binary '/home/berrange/usr/qemu-git/bin/qemu-system-x86_64'
 Compiling script 'probe qemu.system.x86_64.log.qio* {}'
 Running script, <Ctrl>-c to quit
 ...trace output...

It can enable multiple probes at once

 $ qemu-trace-stap run qemu-system-x86_64 'qio*' 'qcrypto*' 'buffer*'

By default it monitors all existing running processes and all future
launched proceses. This can be restricted to a specific PID using the
--pid arg

 $ qemu-trace-stap run --pid 2532 qemu-system-x86_64 'qio*'

Finally if you can't remember what probes are valid it can tell you

 $ qemu-trace-stap list qemu-system-x86_64
 ahci_check_irq
 ahci_cmd_done
 ahci_dma_prepare_buf
 ahci_dma_prepare_buf_fail
 ahci_dma_rw_buf
 ahci_irq_lower
 ...snip...

Or list just those matching a prefix pattern

 $ qemu-trace-stap list -v qemu-system-x86_64 'qio*'
 Using tapset dir '/home/berrange/usr/qemu-git/share/systemtap/tapset' for binary '/home/berrange/usr/qemu-git/bin/qemu-system-x86_64'
 Listing probes with name 'qemu.system.x86_64.log.qio*'
 qio_channel_command_abort
 qio_channel_command_new_pid
 qio_channel_command_new_spawn
 qio_channel_command_wait
 qio_channel_file_new_fd
 ...snip...

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190123120016.4538-5-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-01-24 14:16:56 +00:00
Peter Maydell f6b06fccee ui: highres logo for sdl and gtk, bugfixes for vnc and egl.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJcRdMbAAoJEEy22O7T6HE4wLwQAMncybVlGwPi+1+8qyzOKFJU
 pKWpqVj0lt5Pfl/7ChwOeZ9TieMs0M+A/8Bw98QYTWrjXUiEAbi+p2NjF9EHdZqI
 FfU6q1dGQGrfdOBRu+ep5WT3um0vQ4F+D0bCttlq0bIAjLi5cj3dfbHViiHLtjMD
 yRSoCwy899kAFusCPKXsreXjygvdUFN/7IFVMj4r1Sr2p23hgZ62d7jxUrK1pdez
 450kaXmiZZysv9zJiXZ0dRQQ0cr5jYvUqqWgkS1DuSMBju21LASWfRvD9TWWt2/X
 O7B8pXSpuTMcFoAzXznVv472fh3Ftb8bTXjtJBXE9XslxIGG6xSZ8Qq5ID6w2ofw
 Ki8vRxVg8lrDh/Glky3Vvvb94AnsII2SLs05O3M8KKDOtn6tB0aZCHDpJnHlFJuY
 xAYUvkKTyZdjfwwkQy2VLTkXTz73ZaHeIy29raqTUzAoh+ioj96OaOCY5nmf81Tq
 q+bETkp0EqwF4fslHt/vzHKWp+lXfkWL88VY/Z4TETqd8fqypPkkysBV0XeFZMga
 HjJ33LRaITqTSQl/qQ8i/s5yX9RVyWTcVZsuqOCAYtNLCV8Pc/AHsCUda9SMu7Ub
 WnSrq4OMkixZ2ez+ZH0uDt+TZk20cC0RlhC33nJED5ZsRWX9c0ben39BaAHqn6S8
 1giOMF4NG5feJKxeUeEL
 =spwT
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/ui-20190121-pull-request' into staging

ui: highres logo for sdl and gtk, bugfixes for vnc and egl.

# gpg: Signature made Mon 21 Jan 2019 14:11:39 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/ui-20190121-pull-request:
  egl-helpers.h: do not depend on X11 Window type, use EGLNativeWindowType
  vnc: detect and optimize pageflips
  sdl: add support for high resolution window icon
  ui: fix icon display for GTK frontend under GNOME Shell with Wayland
  ui: install logo icons to $prefix/share/icons

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-23 17:57:47 +00:00
Peter Maydell 952bc8b3c2 nbd patches for 2019-01-21
Add 'qemu-nbd --list' for probing a remote NBD server's advertisements.
 
 - Eric Blake: 0/21 nbd: add qemu-nbd --list
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABCAAGBQJcRktLAAoJEKeha0olJ0NqY8cIAJqcHDAuk1GwcDE/NIAASY9E
 2PsaEL2pM65bEWUwsnVkFyRb4y4S4QX9VtAR/c9G6jR0YHuDvCCz7VGjiHh3eGso
 9AWKzuh5C4mayAN5dTOlbjryOx7hlcz8wDDjP5OQNqIlBvmWVAnLeh5Kkqlc7KDk
 f1SH8kJfqegDAhKDeDhi/HGlL1UVzMr5A2sR6I1wbb5IbBru5JtAKzgqAmdBH893
 lWZ9EDXqajwPCo8ASwZNyawmtmjx+VBeFjO2juA3qTWvf262roiB3XT5W/3n/CCb
 Er5CBwQQvSFBUfF9bRYDziyjwQwTXoIQJ6nuJLzPGx2cUpQbJ/svphoRQ6rBOjY=
 =gywW
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2019-01-21' into staging

nbd patches for 2019-01-21

Add 'qemu-nbd --list' for probing a remote NBD server's advertisements.

- Eric Blake: 0/21 nbd: add qemu-nbd --list

# gpg: Signature made Mon 21 Jan 2019 22:44:27 GMT
# gpg:                using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg:                 aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg:                 aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2  F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-nbd-2019-01-21: (21 commits)
  iotests: Enhance 223, 233 to cover 'qemu-nbd --list'
  nbd/client: Work around 3.0 bug for listing meta contexts
  qemu-nbd: Add --list option
  nbd/client: Add meta contexts to nbd_receive_export_list()
  nbd/client: Add nbd_receive_export_list()
  nbd/client: Refactor nbd_opt_go() to support NBD_OPT_INFO
  nbd/client: Pull out oldstyle size determination
  nbd/client: Split handshake into two functions
  nbd/client: Refactor return of nbd_receive_negotiate()
  nbd/client: Split out nbd_receive_one_meta_context()
  nbd/client: Split out nbd_send_meta_query()
  nbd/client: Change signature of nbd_negotiate_simple_meta_context()
  nbd/client: Move export name into NBDExportInfo
  nbd/client: Refactor nbd_receive_list()
  qemu-nbd: Avoid strtol open-coding
  nbd/server: Favor [u]int64_t over off_t
  nbd/server: Hoist length check to qmp_nbd_server_add
  qemu-nbd: Sanity check partition bounds
  qemu-nbd: Enhance man page
  maint: Allow for EXAMPLES in texi2pod
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-22 17:56:21 +00:00
Eric Blake ae560cc34f maint: Allow for EXAMPLES in texi2pod
The next commit will add an EXAMPLES section to qemu-nbd.8;
for that to work, we need to recognize EXAMPLES in texi2pod.
We also need to add a dependency from all man pages against
the generator script, since a change to the generator may
cause the resulting man page to differ.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <20190117193658.16413-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2019-01-21 15:49:51 -06:00
Daniel P. Berrangé 67ea954682 ui: fix icon display for GTK frontend under GNOME Shell with Wayland
The icon associated with a GtkWindow is just a hint to window managers
and not all of them will honour it. Some will instead want to show the
icon listed by the .desktop file. The desktop file is located based on
the application ID, which is set using g_set_prgname. QEMU has not
historically provided a desktop file or set its app ID, so it got a
broken icon in GNOME shell, which is now fixed.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190110120047.25369-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-01-21 09:43:13 +01:00
Daniel P. Berrangé a8260d3876 ui: install logo icons to $prefix/share/icons
QEMU currently installs logos to $prefix/share/qemu/ which means no GUI
toolkit or applications can find them by default.

The accepted standards for desktop applications declare that application
logos / icons should be installed under $prefix/share/icons, so use this
directory location.

Pre-rendered icons are provided at the standard sizes expected for GUI
applications, along with the scalable SVG, to ensure maximum portability.

The PNGs are rendered from the SVG using inkscape, however, this is not
wired up into the default make rules to avoid requiring inkscape as a
mandatory tool in build systems / developer workstations.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190110120047.25369-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-01-21 09:43:13 +01:00
Marcel Apfelbaum 0f645ba16c contrib/rdmacm-mux: fix clang compilation
Fix Commit a5d2f6f877 (contrib/rdmacm-mux: Add implementation
                       of RDMA User MAD multiplexer).

The above commit introduces a new contrib target, adding a global dependency
to libumad library in case pvrdma configuration option is enabled.
Clang forbids it:
    clang-6.0: error: -libumad: 'linker' input unused
              [-Werror,-Wunused-command-line-argument]

Fix by limiting the scope to the rdmacm-mux target itself.

Reported-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Tested-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190118124614.24548-4-marcel.apfelbaum@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2019-01-19 11:01:57 +02:00
Marc-André Lureau 1fdf39927f build-sys: use a separate slirp-obj-y && slirp.mo
This will allow to have cflags for the whole slirp.mo -objs.
It makes it possible to build tests that links only with
slirp-obj-y (and not the whole common-obj).

It is also a step towards building slirp as a shared library, although
this requires a bit more thoughts to build with
net/slirp.o (CONFIG_SLIRP would need to be 'm') and other build issues.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-01-14 23:36:32 +01:00
Gerd Hoffmann 26b1cbf8b6 keymaps: remove common include
Copy the content into the sl and sv files (the only ones left which are
not generated by qemu-keymap).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181116104319.10329-4-kraxel@redhat.com
2019-01-10 08:55:28 +01:00
Gerd Hoffmann b7c9d9f07e keymaps: drop nl-be map
It doesn't define any keys, only includes "common".
Which makes it effectively an "en-us" map.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181116104319.10329-3-kraxel@redhat.com
2019-01-10 08:55:24 +01:00
Gerd Hoffmann 06e7772fbd keymaps: remove modifiers include
"common" is the only file using it, so we can just include it directly.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181116104319.10329-2-kraxel@redhat.com
2019-01-10 08:55:21 +01:00
Yuval Shaia a5d2f6f877 contrib/rdmacm-mux: Add implementation of RDMA User MAD multiplexer
RDMA MAD kernel module (ibcm) disallow more than one MAD-agent for a
given MAD class.
This does not go hand-by-hand with qemu pvrdma device's requirements
where each VM is MAD agent.
Fix it by adding implementation of RDMA MAD multiplexer service which on
one hand register as a sole MAD agent with the kernel module and on the
other hand gives service to more than one VM.

Design Overview:
Reviewed-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
----------------
A server process is registered to UMAD framework (for this to work the
rdma_cm kernel module needs to be unloaded) and creates a unix socket to
listen to incoming request from clients.
A client process (such as QEMU) connects to this unix socket and
registers with its own GID.

TX:
----
When client needs to send rdma_cm MAD message it construct it the same
way as without this multiplexer, i.e. creates a umad packet but this
time it writes its content to the socket instead of calling umad_send().
The server, upon receiving such a message fetch local_comm_id from it so
a context for this session can be maintain and relay the message to UMAD
layer by calling umad_send().

RX:
----
The server creates a worker thread to process incoming rdma_cm MAD
messages. When an incoming message arrived (umad_recv()) the server,
depending on the message type (attr_id) looks for target client by
either searching in gid->fd table or in local_comm_id->fd table. With
the extracted fd the server relays to incoming message to the client.

Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2018-12-22 11:09:56 +02:00
Markus Armbruster 3a6b016d64 build: Remake config-host.mak when VERSION changes
configure gets the version number from VERSION, and writes it to
config-host.mak.  The make dependency for that is missing.  Because of
that, a rebuild after a VERSION change may not pick up the change.
Fix that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181214084754.23854-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2018-12-20 10:31:08 +01:00
Eric Blake bf582c3461 qapi: Reduce Makefile boilerplate
Adding a new qapi module had some rather tedious repetition to
wire it into Makefile, Makefile.objs, and .gitignore (for example,
see commit bf42508f and its followup b61acdec). For make, add some
indirection by taking advantage of GNU Make string processing to
expand a list of module names into all the required artifacts, so
that future additions of a new module need only touch the list of
module names.  And for gitignore, use globs to cover all generated
file names.

The list has to live in Makefile.objs, due to the way that
our unnest-vars macro slirps in that file without remembering
any definition of $(QAPI_MODULES) from Makefile.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Yuval Shaia <yuval.shaia@oracle.com>
Message-Id: <20181116200016.2080785-1-eblake@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-12-11 18:28:46 +01:00
Alex Williamson 9f42e0b3c2 Makefile: Install new vgabios binaries
Difficult to make use of if not installed

Fixes: cd1bfd5ef3 ("seabios: update bios and vgabios binaries")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 153936155938.28040.11513367417790075721.stgit@gimli.home
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-10-15 09:57:33 +02:00
Viktor Prutyanov 3fa2d384c2 contrib: add elf2dmp tool
elf2dmp is a converter from ELF dump (produced by 'dump-guest-memory') to
Windows MEMORY.DMP format (also know as 'Complete Memory Dump') which can be
opened in WinDbg.

This tool can help if VMCoreInfo device/driver is absent in Windows VM and
'dump-guest-memory -w' is not available but dump can be created in ELF format.

The tool works as follows:
1. Determine the system paging root looking at GS_BASE or KERNEL_GS_BASE
to locate the PRCB structure and finds the kernel CR3 nearby if QEMU CPU
state CR3 is not suitable.
2. Find an address within the kernel image by dereferencing the first
IDT entry and scans virtual memory upwards until the start of the
kernel.
3. Download a PDB matching the kernel from the Microsoft symbol store,
and figure out the layout of certain relevant structures necessary for
the dump.
4. Populate the corresponding structures in the memory image and create
the appropriate dump header.

Signed-off-by: Viktor Prutyanov <viktor.prutyanov@virtuozzo.com>
Message-Id: <1535546488-30208-3-git-send-email-viktor.prutyanov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02 19:09:12 +02:00
Peter Maydell cc28dce2ec vga: add edid support, qxl bugfixes.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJbrILgAAoJEEy22O7T6HE4y9UP/isFQYYHjotebzYR8yNX9ukD
 JjtQt2yIMPSb6k/93UK+MvKxrURH/jNXLGYC68YY74YJGx612cEhjiDdUdW6yf1T
 Qs3Y8Qz5EEQ7yO0Sv4uPp3IoZTMCRrnAri8J8r5N1z7Exm6CMlCQwmTuxA+UYOEA
 JJ6Lz4h9zw8eyM+wLUPc4jkbw9juyEhV3yhzXrH3iELanxVxano6umn/SkTTcLXh
 qydCvHyHYnLF6tUJQSssIBjQuUySiA6yCzzM1cinjYqu8Dm37kFPpgWg/uPclqbe
 cQ0CPeyGdFU+ZQpfWRwQiFe498U3QLG/fTdO82XMgoItZa29Vr47fO1WyOly8SGs
 bcGNrzcgToyRasLXHoGQrRpr7PK+0PCUJrPmrpejkviAaX6R4sBZ4xuuirW69UQR
 AgG7BxbpgjCl+A8+sjJgjn1vTR9bT0sb8DG875j58osAVje3ZFf7Ln6I3CTQrrRf
 wrjldNT0/nOV4WK1QAPE085aEihFzO1MHDaoSDT+AkNv0idrJjGxx/HjCpY8mF4u
 YfKBjhxCDmvgVtT+mG9akv7VDfyReD+iqhoDA1hovWamH7E/QMgvl5rNpie7r0Qf
 914mcojOxIKG8OlbBhWVkpvTTCh1Qfzlgb7jffCwU+1RUZ/9lC41aIXmyuUoB2Ld
 G4qtPXaDJzpdZKaUieD9
 =P3hQ
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20180927-pull-request' into staging

vga: add edid support, qxl bugfixes.

# gpg: Signature made Thu 27 Sep 2018 08:12:32 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20180927-pull-request:
  qxl: support mono cursors with inverted colors
  qxl: use guest_monitor_config for local renderer.
  display/stdvga: add edid support.
  display/edid: add DEFINE_EDID_PROPERTIES
  display/edid: add region helper.
  display/edid: add qemu_edid_size()
  display/edid: add edid generator to qemu.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-01 11:33:16 +01:00
Gerd Hoffmann 72d277a70e display/edid: add edid generator to qemu.
EDID is a metadata format to describe monitors.  On physical hardware
the monitor has an eeprom with that data block which can be read over
i2c bus.

On a linux system you can usually find the EDID data block in
/sys/class/drm/$card/$connector/edid.  xorg ships a edid-decode utility
which you can use to turn the blob into readable form.

I think it would be a good idea to use EDID for virtual displays too.
Needs changes in both qemu and guest kms drivers.  This patch is the
first step, it adds an generator for EDID blobs to qemu.  Comes with a
qemu-edid test tool included.

With EDID we can pass more information to the guest.  Names and serial
numbers, so the guests display configuration has no boring "Unknown
Monitor".  List of video modes.  Display resolution, pretty important
in case we want add HiDPI support some day.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180925075646.25114-2-kraxel@redhat.com
2018-09-27 08:07:51 +02:00
Thomas Huth 681a1eafe2 Makefile: Add missing dependency for qemu-deprecated.texi
Make sure that the docs get correctly regenerated when the
file qemu-deprecated.texi has been changed.

Fixes: 44c67847e3
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit f99ce85279178385f204a52236f855c879c29cdc)
2018-09-25 17:26:17 +02:00
Juan Quintela e92af6ec85 configure: We don't want to clean configuration files
If you don't want to compile everything, you configure
config-devices.mak.  And then make clean remove it, and make will
create a default one without your configuration.  Fix it by not
removing it on clean target.  Remove it instead on distclean.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>

---

Remove it instead on distclean.
2018-08-27 11:27:06 +02:00
Daniel P. Berrangé 2544e9e4aa docs: add guidance on configuring CPU models for x86
With the recent set of CPU hardware vulnerabilities on x86, it is
increasingly difficult to understand which CPU configurations are
good to use and what flaws they might be vulnerable to.

This doc attempts to help management applications and administrators in
picking sensible CPU configuration on x86 hosts. It outlines which of
the named CPU models are good choices, and describes which extra CPU
flags should be enabled to allow the guest to mitigate hardware flaws.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180627160103.13634-1-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-08-16 13:43:01 -03:00
Alex Bennée fe8bf5f629 build-system: add coverage-report target
This will build a coverage report under the current directory in
reports/coverage. At the users option a report can be generated by
directly invoking something like:

  make foo/bar/coverage-report.html

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2018-07-05 15:59:41 +01:00
Alex Bennée 990e6a2754 build-system: add clean-coverage target
This can be used to remove any stale coverage data before any
particular test run. This is useful for analysing individual tests.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>---
2018-07-05 15:59:41 +01:00
Alex Bennée 2b1f35b9a8 Revert "Makefile: Rename TARGET_DIRS to TARGET_LIST"
This reverts commit 208ecb3e1a. This was
causing problems by making DEF_TARGET_LIST pointless and having to
jump through hoops to build on mingw with a dully enabled config.
This includes a change to fix the per-guest TCG test probe which was
added after 208ecb3 and used TARGET_LIST.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
2018-07-05 15:59:41 +01:00
Matthias Maier 0d6b93deee Revert commit d4e5ec877c
This commit removes the PYTHON_UTF8 workaround. The problem with setting

  LC_ALL= LANG=C LC_CTYPE=en_US.UTF-8

is that the en_US.UTF-8 locale might not be available. In this case
setting above locales results in build errors even though another UTF-8
locale was originally set [1]. The only stable way of fixing the
encoding problem is by specifying the encoding in Python, like the
previous commit does.

[1] https://bugs.gentoo.org/657766

Signed-off-by: Arfrever Frehtes Taifersar Arahesis <arfrever.fta@gmail.com>
Signed-off-by: Matthias Maier <tamiko@43-1.org>
Message-Id: <20180618175958.29073-3-armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-06-22 16:33:47 +02:00
Peter Maydell 409c241f88 ui: bugfixes for sdl and gtk
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJbIigtAAoJEEy22O7T6HE4Y94QAKgXLVAZj53zdIdsX72nlni4
 XFgtMfYtybBS7uM12Oz552OPgmwd4wofp/+yuARh2DZiW2vXBdOuH5bNqgoSgBej
 BO1XemUckQWYXZf+OQDhSZgKUkpOKjCCcP7FwGO0kDCUTkRpfblrHUYT+yTxFDj8
 A6lkuzIjAEBQGEM2dKK7VL95hIb+VWnORjOhEEFz5YSS+BtCLUa90+KXN62s/WCN
 jvMmFleE/zH2TzNhk6/mL2n7Oc7FNuJhrt6s+olUGrSEkzXZGzXBW/wwoEPnrGJb
 9DJiz7iMSfXbUCLphtlB3EKWaqlprMN5pBIK+9buJixdJts9r3ku9VEMQnP5VFys
 +Q+dQvgYYYweMBrNznnUup3x5dG/YyiGp9pgzv2YXTCDMsOG/C7okGd+Fr1L8MMN
 lUWjp55zdZOYm9V+c12uStPv/hT7Mo0rPJzH2UiK/CeUN0+u52gqegXcnUobMLfl
 zNQPXAktKL+CR0gpmf28rOHbWj1g5uAnGvQSfVBkZ6ne4l1CckDsWchWdwMzztS1
 xw7ZzNG+OEmBFoKkhvVimWsd0kbVMK+PEQbTcTO0kJFSDI2VUjQx48F3bJXBqZkJ
 Fq16kEVd/JNVTCI3mTEJR1N0CA5EbJ+Pe6IHRU9ZprLxXEEHGADpuSUPULkCsOzl
 j+EOmgrwCXpYPD2zBvFx
 =Fshe
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/ui-20180614-pull-request' into staging

ui: bugfixes for sdl and gtk

# gpg: Signature made Thu 14 Jun 2018 09:32:45 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/ui-20180614-pull-request:
  sdl2: restore window dimensions by resize
  ui: darwin: gtk: Add missing input keymap

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-14 14:04:14 +01:00
Peter Maydell 945741da77 Miscellaneous patches for 2018-06-13
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJbIRNnAAoJEDhwtADrkYZTUegP/26bCanBdGq8NEH18EdzXU6u
 OZ5Xzx+ZvZCCsLJ3C+m+rxB82eEMVJq5Pj9/Sp/OP/Rebbj+JlGZDzV51T3KCmoA
 VxJ89mKCuDTC5Bqcac41AdDT0d9XkkiwTQNtbTzJwXef9TCygthpvzk4DeE2IfQB
 oYuMfeFt93xPXVuNUyUAHuVY5Z0uVeyRWZyqQ354leD53k0qO5TG0f87h7Awx7Cc
 mXgP6yMqBTBb4WnhHfhagg0TdSXr3OlXJ+265/2bpTNdbVz1e0dTjCU28ej1rmpw
 z01oZCrB1cCSoOrz9jNMG+HGmbarwbQ7EBwRZQZK5V89W8TiBKHdt7MIFlbgnTNI
 HK2RCh92X3ndk01vOn029yk4wYJhj3XNmKfIoWzBal+SIkd9BlJ92xckD7Iso9Pm
 WLf+DNCa46x+yiA+UXHdLmxZEGkclPnRvxW8Iz1l61iHjc3bW/ApWAMjQNPMJ1Vh
 4exOV+iisnrzaJZn4kfNnQXwTawDj/c11XxwwLOvk9NUPZBOIFm4PjX+hsXZSfuS
 8cxACWC+EvIFeOIN1fX2DQHyhdjYT976dIi+jMsxipGo1Ob9D8+oArUsKN5SWWkq
 O8+lwbkT02T7WmWuexRbgmkon/LDbjwDBGGdTjdcIutJUCu7KmPgHqLzd6SXHTPT
 jjYi0bmiI/pQY72+F8vZ
 =2uvo
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2018-06-13' into staging

Miscellaneous patches for 2018-06-13

# gpg: Signature made Wed 13 Jun 2018 13:51:51 BST
# gpg:                using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-misc-2018-06-13:
  Purge uses of banned g_assert_FOO()
  coverity-model: replay data is considered trusted
  Revert "Makefile: add target to print generated files"

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-14 11:35:22 +01:00
Keno Fischer 656282d245 ui: darwin: gtk: Add missing input keymap
In appears the input keymap for osx was forgotten in the commit that
converted the gtk frontend to keycodemapdb. Add it.

Fixes: 2ec78706 ("ui: convert GTK and SDL1 frontends to keycodemapdb")
CC: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Message-id: 1528933916-40670-1-git-send-email-keno@juliacomputing.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-06-14 09:52:23 +02:00
Markus Armbruster 717ea844a7 Revert "Makefile: add target to print generated files"
This reverts commit 9578f8cc3e.

The patch snuck in by accident without having been posted to
qemu-devel.  It's entirely redundant: existing target print-% already
serves the purpose.

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180504054241.6833-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2018-06-13 13:47:35 +02:00
Peter Maydell 3b2a4d3901 Fixes in syscall numbers,
disable the build of binaries not needed for linux-user,
 update of qemu-binfmt-conf.sh and cleanup around is_error()
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJbH6cOAAoJEPMMOL0/L748Qx0P/154ARvl8Rfa1JyxFp87vcWW
 N/WbtxsqKJupdaGSkdZQTOIBQ9Xf51z1EkKaD++oEgN2bYtw0CUQ5MVlfOw2uCoY
 0SnSGrB5qHcEkoN5p+0CwOgQlSoGLNKRZKdkqFIOkXlQUe20DmKqWROB1N5Jpt7x
 ezsaMKKTu+qSd4nlcF2wyJxeW7v6ofJkOsVRZHktxOPBYqbcwV4rQV3Mg+3ZCumt
 6NxvrRvdCLOPMqKJeMSXUWfAE194PiIwtJwwdPG8GbNpV/w/hfse0tAeUZASZoSd
 xBhS6Ne8T19lCpn62ENrtQj5l9zV5Dt1ZVFLMRGFrHDaZvnsr5UKLmr2yDCwvETN
 D023PHWfNaWt+fWoCSVQ8Kr3rB3UgTryEQTnuKiCg6MCj8hbbS90wn+26dlXo5XQ
 dBatlMuLsw6ASPyqPl3alPogS+ies6/sK52EEJU5KQJ3bxcFcETX5bBO1QEDAhJs
 Eo0nDyAjcTIXv7ICQQaVyJnb1QGw0TK7KBKq5wACkvHMqEc++Q8U54NiA8O/nsIu
 XCZlsO0pktJgT0EftS+alnygMAy158eO8u49egVWDDjBdKri6kgu9poljCKZGwTN
 CfAO0+kjfnrCFuCub0q4Ssp641rjeVF20uQ8O8bx4qqWTILD6PtKK5FiYHq2jYnN
 cBYRvu7w2N741o2LXiRD
 =oWiH
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-3.0-pull-request' into staging

Fixes in syscall numbers,
disable the build of binaries not needed for linux-user,
update of qemu-binfmt-conf.sh and cleanup around is_error()

# gpg: Signature made Tue 12 Jun 2018 11:57:18 BST
# gpg:                using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>"
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-3.0-pull-request:
  linux-user/sparc64: Add inotify_rm_watch and tee syscalls
  linux-user/microblaze: Fix typo in accept4 syscall
  linux-user/hppa: Fix typo in mknodat syscall
  linux-user/alpha: Fix epoll syscalls
  qemu-binfmt-conf.sh: ignore the OS/ABI field
  linux-user: disable qemu-bridge-helper and socket_scm_helper build
  linux-user: Use is_error() to avoid warnings and make the code clearer
  linux-user: Export use is_error(), use it to avoid warnings

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-12 16:42:53 +01:00
Laurent Vivier 206d1b9c38 linux-user: disable qemu-bridge-helper and socket_scm_helper build
linux-user targets don't need them, and if we ask to build statically
linked binaries, some static libraries they need are not available.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180605160958.5434-1-laurent@vivier.eu>
2018-06-11 14:40:11 +02:00
Eduardo Habkost c788341244 python: Remove scripts/ordereddict.py
Python 2.7 (the minimum Python version we require) provides
collections.OrderedDict on the standard library, so we don't need
to carry our own implementation.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180608175252.25110-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-06-08 16:40:54 -03:00