Gcc 9 needs some convincing that sopreprbuf really is going to fill
in iov in the call from soreadbuf, even though the failure case
shouldn't happen.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190415121740.9881-1-dgilbert@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
slirp has been maintained by the QEMU maintainers and will be
maintained under an independent project soon.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kelly Price <strredwolf@gmail.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The slirp COPYRIGHT file is a BSD-3 license. Instead of referring to
another project file, the SPDX license notice present in all source
files states that unequivocally.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add SPDX license identifier to clarify the license of files without
explicit license header.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Add SPDX license identifier to clarify the license of files with
reference to BSD license from slirp COPYRIGHT file.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Add SPDX license identifier to clarify the license of files with
explicit MIT license header.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Add SPDX license identifier to clarify the license of files with
explicit 3-clause BSD license header.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
In order to make slirp a standalone project, the project must have a
clear license, and be compatible with the GPL or LGPL.
Since commit 2f5f899631 ("Remove the
advertising clause from the slirp license"), slirp is BSD-3. But new
files have been added under slirp/ with QEMU GPL license since then.
The copyright holders have been asked to relicense files to BSD-3 and
gave their permission:
- slirp/dhcpv6.{c,h}
Subject: Re: Clearing slirp/ license
To: "Marc-André Lureau" <marcandre.lureau@gmail.com>, QEMU <qemu-devel@nongnu.org>, Thomas Huth <thuth@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>, Samuel Thibault <samuel.thibault@ens-lyon.org>
References: <CAJ+F1CKBRNdLPb_wOLhURdUJd-j1RHY2toKSTEhCBt_zs4Xk1w@mail.gmail.com>
From: "Cédric Le Goater" <clg@kaod.org>
Message-ID: <e942cdab-fe1b-fdf4-3b9f-da16a4afa953@kaod.org>
Date: Mon, 11 Mar 2019 16:23:25 +0100
> Could you reply that you have no objection in relicensing those files
> are 3-Clause BSD?
Fine for me. You can change the license of slirp/ncsi.c and
slirp/ncsi-pkt.hto a 3-Clause BSD.
Thanks,
C.
Subject: Re: [Qemu-devel] Clearing slirp/ license
To: Peter Maydell <peter.maydell@linaro.org>, Shan Gavin <shan.gavin@gmail.com>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>, "Marc-André Lureau" <marcandre.lureau@gmail.com>, Gavin Shan <gwshan@linux.vnet.ibm.com>, Thomas Huth <thuth@redhat.com>, QEMU <qemu-devel@nongnu.org>, Samuel Thibault <samuel.thibault@ens-lyon.org>
References: <CAJ+F1CKBRNdLPb_wOLhURdUJd-j1RHY2toKSTEhCBt_zs4Xk1w@mail.gmail.com> <e942cdab-fe1b-fdf4-3b9f-da16a4afa953@kaod.org> <CAJ+F1C+hFfsa5gcSdttTP5J+uyDvNdYJWrm9OJM26+Zc1ZQkew@mail.gmail.com> <cc62e1fd-c564-e1b7-d10c-30665b481352@ozlabs.ru> <CAOL5TwkQXhPjdPP9v7n7mxAVxbDCSo6MEaG+E-Xys=MoD_pg2g@mail.gmail.com> <CAFEAcA_g=L2LSo=B_5dpJhJJrqFiOb6sswMVohQwpVGiKi_A7w@mail.gmail.com>
From: "Cédric Le Goater" <clg@kaod.org>
Message-ID: <4ddf6031-0df1-b3b5-965e-a181266e42b0@kaod.org>
Date: Tue, 12 Mar 2019 11:49:21 +0100
> Is the code in question copyright you personally, or copyright
> IBM as your employer at the time ? If the latter, it is IBM that
> would need to approve the relicensing.
That was done. I had our legal team approve the change of license.
Thanks,
C.
From: Shan Gavin <shan.gavin@gmail.com>
Date: Tue, 12 Mar 2019 15:04:54 +0800
Message-ID: <CAOL5TwkQXhPjdPP9v7n7mxAVxbDCSo6MEaG+E-Xys=MoD_pg2g@mail.gmail.com>
Subject: Re: [Qemu-devel] Clearing slirp/ license
To: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: "Marc-André Lureau" <marcandre.lureau@gmail.com>, "Cédric Le Goater" <clg@kaod.org>, gwshan@linux.vnet.ibm.com, Peter Maydell <peter.maydell@linaro.org>, Thomas Huth <thuth@redhat.com>, QEMU <qemu-devel@nongnu.org>, Samuel Thibault <samuel.thibault@ens-lyon.org>
> Gavin, could you reply that you have no objection in relicensing
> ncsi-pkt.h as 3-Clause BSD?
No objection. Please go ahead with the relicensing.
Cheers,
Gavin
- ncsi.c, ncsi-pkt.h
Subject: Re: Clearing slirp/ license
To: "Marc-André Lureau" <marcandre.lureau@gmail.com>, QEMU <qemu-devel@nongnu.org>, "Cédric Le Goater" <clg@kaod.org>
Cc: Peter Maydell <peter.maydell@linaro.org>, Samuel Thibault <samuel.thibault@ens-lyon.org>
References: <CAJ+F1CKBRNdLPb_wOLhURdUJd-j1RHY2toKSTEhCBt_zs4Xk1w@mail.gmail.com>
From: Thomas Huth <thuth@redhat.com>
Message-ID: <ed5a9f55-f2e5-298d-58ac-414759e9b491@redhat.com>
Date: Wed, 13 Feb 2019 12:30:32 +0100
> Could you reply that you have no objection in relicensing those files
> are 3-Clause BSD?
Ok, for the records: I'm fine if you change the license of dhcpv6.[ch]
to either 3-Clause BSD or 2-Clause BSD.
Thomas
- vmstate.{c,h}
From: Juan Quintela <quintela@redhat.com>
To: "Marc-André Lureau" <marcandre.lureau@gmail.com>
Cc: QEMU <qemu-devel@nongnu.org>, Peter Maydell <peter.maydell@linaro.org>, Samuel Thibault <samuel.thibault@ens-lyon.org>
Subject: Re: Clearing slirp/ license
Date: Tue, 12 Mar 2019 12:43:17 +0100
Message-ID: <87k1h4qpwq.fsf@trasno.org>
> Juan, Could you reply that you have no objection in relicensing the
> vmstate files as 3-Clause BSD?
No problem at all on my side.
Later, Juan.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[ for the NC-SI files ]
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Thomas Huth <thuth@redhat.com>
According to commit 2f5f899631 ("Remove
the advertising clause from the slirp license"), Danny Gasparovski
gave permission to license slirp code under 3-clause BSD license:
Subject: RE: Slirp license
Date: Thu, 8 Jan 2009 10:51:00 +1100
From: "Gasparovski, Daniel" <Daniel.Gasparovski@ato.gov.au>
To: "Richard Fontana" <rfontana@redhat.com>
I have no objection to having Slirp code in QEMU be licensed under
the 3-clause BSD license.
slirp/COPYRIGHT's initial version in 2004 (commit 5fafdf24) listed
only 3 clauses BUT used the poisonous advertising clause for clause 3
which is the controversial clause of non-free 4-clause (that is, it
appears that the BSD-4 license was copied, and then the WRONG clause
was deleted, when creating COPYRIGHT. Perhaps explained as an easy
mistake to make since 3-clause was created by removing clause 3 of the
4-clause, where you sometimes see the three-clause version with
clauses 1, 2, 4; but more commonly see a renumbered version with
clauses 1, 2, 3 to close the gap. If you pay attention only to clause
numbers instead of content, it can be easy to confuse which clause to
delete to go from 4-clause to 3-clause).
Commit 2f5f89963 removed the poisonous wrong clause on
the grounds of moving from 4-clause to 3-clause; but did not add the
missing clause, which makes it LOOK like the 2-clause version. But I
think we have a decent enough trail showing the intent for 3-clause.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
QEMU no longer includes it, and treats slirp/ as a separate project.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190212162524.31504-8-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Add a simple Makefile to build libslirp.a, a static library version of
libslirp, to be used by QEMU during a transition period, until a
shared library is available.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190212162524.31504-6-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Prepare for making slirp/ a standalone project.
Remove some useless includes while at it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190212162524.31504-5-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
To avoid conflict with QEMU inet_aton() implementation, let's use the
"slirp_" prefix. This allows to drop the WITH_QEMU, thus the source
won't make a distinction when building with QEMU or not.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190212162524.31504-4-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
slirp migration code uses QEMU vmstate so far, when building WITH_QEMU.
Introduce slirp_state_{load,save,version}() functions to move the
state saving handling to libslirp side.
So far, the bitstream compatibility should remain equal with current
QEMU, as this is effectively using the same code, with the same format
etc. When libslirp is made standalone, we will need some mechanism to
ensure bitstream compatibility regardless of the libslirp version
installed. See the FIXME note in the code.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190212162524.31504-3-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Add vmstate serialization code adapted from QEMU.
Keep only the bits that are required for libslirp.
Introduce a IStream/OStream interface to replace QEMU QFile
abstraction.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190212162524.31504-2-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
When emulating ident in tcp_emu, if the strchr checks passed but the
sscanf check failed, two uninitialized variables would be copied and
sent in the reply, so move this code inside the if(sscanf()) clause.
Signed-off-by: William Bowling <will@wbowling.info>
Cc: qemu-stable@nongnu.org
Cc: secalert@redhat.com
Message-Id: <1551476756-25749-1-git-send-email-will@wbowling.info>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Sometimes sorecvfrom() is called from slirp.c because revents == G_IO_IN,
but there is 0 bytes available and recvfrom could be blocking indefinitely.
This is likely due to 0-length udp payload. This also adds an error
checking for ioctlsocket.
Signed-off-by: Vic Lee <llyzs.vic@gmail.com>
Message-Id: <20190301064809.3074-1-llyzs.vic@gmail.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Build fails with gcc 9:
CC slirp/ndp_table.o
slirp/ndp_table.c: In function ‘ndp_table_add’:
slirp/ndp_table.c:31:23: error: taking address of packed member of ‘struct ndpentry’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
31 | if (in6_equal(&ndp_table->table[i].ip_addr, &ip_addr)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
slirp/ndp_table.c: In function ‘ndp_table_search’:
slirp/ndp_table.c:75:23: error: taking address of packed member of ‘struct ndpentry’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
75 | if (in6_equal(&ndp_table->table[i].ip_addr, &ip_addr)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
The ndpentry structure isn't used to model on-the-wire data or anything
else that would care for the struct layout. It doesn't need to be packed
actually. Just drop SLIRP_PACKED.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155143315831.102868.17515265400523392682.stgit@bahia.lan>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
QEMU wraps the socket functions in os-win32.h, but in commit
a9d8b3ec43, the header inclusion was dropped,
breaking libslirp on Windows.
Wrap the missing functions.
Rename the wrapped function with "slirp_" prefix and "_wrap" suffix,
for consistency and to avoid a clash with existing function (such as
"slirp_socket").
Fixes: a9d8b3ec ("slirp: replace remaining qemu headers dependency")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190212160953.29051-3-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Howard Spoelstra
QEMU wraps the socket functions in os-win32.h, but in commit
a9d8b3ec43, the header inclusion was dropped,
breaking libslirp on Windows.
There are already a few socket functions that are wrapped in libslirp,
with "slirp_" prefix, but many of them are missing, and we are going
to wrap the missing functions in a second patch.
Using "slirp_" prefix avoids the conflict with socket function #define
wrappers in QEMU os-win32.h, but they are quite intrusive. In the end,
the functions should behave the same as original one, but with errno
being set. To avoid the churn, and potential confusion, remove the
"slirp_" prefix. A series of #undef is necessary until libslirp is
made standalone to prevent the #define conflict with QEMU.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190212160953.29051-2-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Make it possible to use headers easily with C++ projects.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
This is friendlier for FFI bindings.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
It would be legitimate to use libslirp without glib. Let's
add_poll/get_revents pair of callbacks to provide the same
functionality.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Now that polling is done per-instance, we don't need a global list of
slirp instances.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Remove hard-coded dependency on slirp in main-loop, and use a "poll"
notifier instead. The notifier is registered per slirp instance.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Use a more descriptive name for the callback.
Reuse the SlirpWriteCb type. Wrap it to check that all data has been written.
Return a ssize_t for potential error handling and data-loss reporting.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Except for the migration code which is gated by WITH_QEMU, only
include our own headers, so libslirp can be built standalone.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Only slirp actually needs it, and will need it along in libslirp.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
to remove another dependency on qemu.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Some of those could have been squashed earlier, but it is easier to do
it all here.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: samuel Thibault <samuel.thibault@ens-lyon.org>
Remove a dependency on qemu util.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Our API usage requires Vista, set WIN32_LEAN_AND_MEAN to fix a number
of issues (winsock2.h include order for ex, which is better to include
first for legacy reasons).
While at it, group redundants #ifndef _WIN32 blocks.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Make state saving optional: this will allow to build SLIRP without
QEMU. (eventually, the vmstate helpers will be extracted, so an
external project & process could save its state)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Introduce a SlirpCb callback to kick the main io-thread.
Add an intermediary sodrop() function that will call SlirpCb.notify
callback when sbdrop() returns true.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Add a counter-part to register_poll_fd() for completeness.
(so far, register_poll_fd() is called only on struct socket fd)
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Replace qemu_set_nonblock() with slirp_set_nonblock()
qemu_set_nonblock() does some event registration with the main
loop. Add a new callback register_poll_fd() for that reason.
Always build the fd-register stub, to avoid #if WIN32.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
qemu_set_nonblock() is slightly more problematic and will be dealt
with in a separate patch.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Remove a dependency on QEMU. Use the existing logging facilities.
Set SLIRP_DEBUG=tftp to get tftp log.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Instead of calling into QEMU chardev directly, and mixing it with
slirp_add_exec() handling, add a new function slirp_add_guestfwd()
which takes a write callback.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
There is no reason to mark the struct ipq and struct ipasfrag as
packed: they are naturally aligned anyway, and are not representing
any on-the-wire packet format. Indeed they vary in size depending on
the size of pointers on the host system, because the 'struct qlink'
members include 'void *' fields.
Dropping the 'packed' annotation fixes clang -Waddress-of-packed-member
warnings and probably lets the compiler generate better code too.
The only thing we do care about in the layout of the struct is
that the frag_link matches up with the ipf_link of the struct
ipasfrag, as documented in the comment on that struct; assert
at build time that this is the case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Dr. David Alan Gilbert
Marc-André Lureau
Samuel Thibault
William Bowling
Vic Lee
Greg Kurz
Peter Maydell