... similar to tlb_vaddr_to_host(); however, allow access to the host
page except when TLB_NOTDIRTY or TLB_MMIO is set.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190830100959.26615-2-david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Factor it out into common code. Similar to the !CONFIG_USER_ONLY variant,
let's not allow to cross page boundaries.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190826075112.25637-4-david@redhat.com>
[rth: Move cpu & cc variables inside if block.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The raising of exceptions from check_watchpoint, buried inside
of the I/O subsystem, is fundamentally broken. We do not have
the helper return address with which we can unwind guest state.
Replace PHYS_SECTION_WATCH and io_mem_watch with TLB_WATCHPOINT.
Move the call to cpu_check_watchpoint into the cputlb helpers
where we do have the helper return address.
This allows watchpoints on RAM to bypass the full i/o access path.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We want to move the check for watchpoints from
memory_region_section_get_iotlb to tlb_set_page_with_attrs.
Isolate the loop over watchpoints to an exported function.
Rename the existing cpu_watchpoint_address_matches to
watchpoint_address_matches, since it doesn't actually
have a cpu argument.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We had two different mechanisms to force a recheck of the tlb.
Before TLB_RECHECK was introduced, we had a PAGE_WRITE_INV bit
that would immediate set TLB_INVALID_MASK, which automatically
means that a second check of the tlb entry fails.
We can use the same mechanism to handle small pages.
Conserve TLB_* bits by removing TLB_RECHECK.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We want to perform the same checks in probe_write() to trigger a cpu
exit before doing any modifications. We'll have to pass a PC.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190823100741.9621-9-david@redhat.com>
[rth: Use vaddr for len, like other watchpoint functions;
Move user-only stub to static inline.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Let the user-only watchpoint stubs resolve to empty inline functions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Notice new attribute, byte swap, and force the transaction through the
memory slow path.
Required by architectures that can invert endianness of memory
transaction, e.g. SPARC64 has the Invert Endian TTE bit.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <2a10a1f1c00a894af1212c8f68ef09c2966023c1.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Preparation for collapsing the two byte swaps adjust_endianness and
handle_bswap into the former.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <755b7104410956b743e1f1e9c34ab87db113360f.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Preparation for collapsing the two byte swaps adjust_endianness and
handle_bswap into the former.
Call memory_region_dispatch_{read|write} with endianness encoded into
the "MemOp op" operand.
This patch does not change any behaviour as
memory_region_dispatch_{read|write} is yet to handle the endianness.
Once it does handle endianness, callers with byte swaps can collapse
them into adjust_endianness.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Message-Id: <8066ab3eb037c0388dfadfe53c5118429dd1de3a.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert memory_region_dispatch_{read|write} operand "unsigned size"
into a "MemOp op".
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1dd82df5801866743f838f1d046475115a1d32da.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The memory_region_dispatch_{read|write} operand "unsigned size" is
being converted into a "MemOp op".
Introduce no-op size_memop to aid preparatory conversion of
interfaces.
Once interfaces are converted, size_memop will be implemented to
return a MemOp from size in bytes.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <35b8ee74020f67cf40848fb7d5f127cf96c851d6.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Preparation for collapsing the two byte swaps, adjust_endianness and
handle_bswap, along the I/O path.
Target dependant attributes are conditionalized upon NEED_CPU_H.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <81d9cd7d7f5aaadfa772d6c48ecee834e9cf7882.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Implement and use new interface to get rid of hd_qiov.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-13-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-13-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce extended variants of bdrv_co_preadv and bdrv_co_pwritev
with qiov_offset parameter.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-10-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-10-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add handlers supporting qiov_offset parameter:
bdrv_co_preadv_part
bdrv_co_pwritev_part
bdrv_co_pwritev_compressed_part
This is used to reduce need of defining local_qiovs and hd_qiovs in all
corners of block layer code. The following patches will increase usage
of this new API part by part.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-5-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-5-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We'll need to check a part of qiov soon, so implement it now.
Optimization with align down to 4 * sizeof(long) is dropped due to:
1. It is strange: it aligns length of the buffer, but where is a
guarantee that buffer pointer is aligned itself?
2. buffer_is_zero() is a better place for optimizations and it has
them.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-3-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-3-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce new initialization API, to create requests with padding. Will
be used in the following patch. New API uses qemu_iovec_init_buf if
resulting io vector has only one element, to avoid extra allocations.
So, we need to update qemu_iovec_destroy to support destroying such
QIOVs.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-2-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-2-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The xen_[rw]?mb() macros defined in ring.h can't be used and the fact
that there are gated behind __XEN_INTERFACE_VERSION__ means that it
needs to be defined somewhere. QEMU doesn't implement interfaces with
the Xen hypervisor so defining __XEN_INTERFACE_VERSION__ is pointless.
This leads to:
include/hw/xen/io/ring.h:47:5: error: "__XEN_INTERFACE_VERSION__"
is not defined, evaluates to 0 [-Werror=undef]
Cleanup ring.h. The xen_*mb() macros are already defined in xenctrl.h
which is included in xen_common.h.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190704153605.4140-1-anthony.perard@citrix.com>
[aperard: Adding the comment proposed upstream]
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
* Bump minium glib2 version to 2.48
* Convert much of the crypto code to use automatic memory free functions
-----BEGIN PGP SIGNATURE-----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=adkl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/autofree-pull-request' into staging
require newer glib2 to enable autofree'ing of stack variables exiting scope
* Bump minium glib2 version to 2.48
* Convert much of the crypto code to use automatic memory free functions
# gpg: Signature made Thu 22 Aug 2019 11:51:59 BST
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/autofree-pull-request:
crypto: use auto cleanup for many stack variables
crypto: define cleanup functions for use with g_autoptr
glib: bump min required glib library version to 2.48
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow crypto structs to be used with g_autoptr, avoiding the need to
explicitly call XXX_free() functions when variables go out of scope on
the stack.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Per supported platforms doc[1], the various min glib on relevant distros is:
RHEL-8: 2.56.1
RHEL-7: 2.50.3
Debian (Buster): 2.58.3
Debian (Stretch): 2.50.3
OpenBSD (Ports): 2.58.3
FreeBSD (Ports): 2.56.3
OpenSUSE Leap 15: 2.54.3
SLE12-SP2: 2.48.2
Ubuntu (Xenial): 2.48.0
macOS (Homebrew): 2.56.0
This suggests that a minimum glib of 2.48 is a reasonable target.
Compared to the previous version bump in
commit e7b3af8159
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Fri May 4 15:34:46 2018 +0100
glib: bump min required glib library version to 2.40
This will result in us dropping support for Debian Jessie and
Ubuntu 14.04.
As per the commit message 14.04 was already outside our list
of supported build platforms and an exception was only made
because one of the build hosts used during merge testing was
stuck on 14.04.
Debian Jessie is justified to drop because we only aim to
support at most 2 major versions of Debian at any time. This
means Buster and Stretch at this time.
The g_strv_contains compat code is dropped as this API is
present since 2.44
The g_assert_cmpmem compat code is dropped as this API is
present since 2.46
[1] https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Let the caller know of load success.
Note that this also changes slightly the behaviour of the function to
try loading on subsequent calls if the previous ones failed.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=KtI3
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kraxel/tags/audio-20190821-pull-request' into staging
audio: second batch of -audiodev support, adding support for multiple backends.
# gpg: Signature made Wed 21 Aug 2019 09:40:37 BST
# gpg: using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/audio-20190821-pull-request:
audio: fix memory leak reported by ASAN
audio: use size_t where makes sense
audio: remove read and write pcm_ops
paaudio: fix playback glitches
audio: do not run each backend in audio_run
audio: remove audio_MIN, audio_MAX
paaudio: properly disconnect streams in fini_*
paaudio: do not move stream when sink/source name is specified
audio: audiodev= parameters no longer optional when -audiodev present
paaudio: prepare for multiple audiodev
audio: add audiodev properties to frontends
audio: add audiodev property to vnc and wav_capture
audio: basic support for multi backend audio
audio: reduce glob_audio_state usage
audio: Add missing fall through comments
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
First ppc and spapr pull request for qemu-4.2. Includes:
* Some TCG emulation fixes and performance improvements
* Support for the mffsl instruction in TCG
* Added missing DPDES SPR
* Some enhancements to the emulation of the XIVE interrupt
controller
* Cleanups to spapr MSI management
* Some new suspend/resume infrastructure and a draft suspend
implementation for spapr
* New spapr hypercall for TPM communication (will be needed for
secure guests under an Ultravisor)
* Fix several memory leaks
And a few other assorted fixes.
-----BEGIN PGP SIGNATURE-----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=E+7d
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.2-20190821' into staging
ppc patch queue for 2019-08-21
First ppc and spapr pull request for qemu-4.2. Includes:
* Some TCG emulation fixes and performance improvements
* Support for the mffsl instruction in TCG
* Added missing DPDES SPR
* Some enhancements to the emulation of the XIVE interrupt
controller
* Cleanups to spapr MSI management
* Some new suspend/resume infrastructure and a draft suspend
implementation for spapr
* New spapr hypercall for TPM communication (will be needed for
secure guests under an Ultravisor)
* Fix several memory leaks
And a few other assorted fixes.
# gpg: Signature made Wed 21 Aug 2019 08:24:44 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.2-20190821: (42 commits)
ppc: Fix emulated single to double denormalized conversions
ppc: Fix emulated INFINITY and NAN conversions
ppc: conform to processor User's Manual for xscvdpspn
ppc: Add support for 'mffsl' instruction
target/ppc: Add Directed Privileged Door-bell Exception State (DPDES) SPR
spapr/xive: Mask the EAS when allocating an IRQ
spapr: Implement better workaround in spapr-vty device
spapr/irq: Drop spapr_irq_msi_reset()
spapr/pci: Free MSIs during reset
spapr/pci: Consolidate de-allocation of MSIs
ppc: remove idle_timer logic
spapr: Implement ibm,suspend-me
i386: use machine class ->wakeup method
machine: Add wakeup method to MachineClass
ppc/xive: Improve 'info pic' support
ppc/xive: Provide silent escalation support
ppc/xive: Provide unconditional escalation support
ppc/xive: Provide escalation support
ppc/xive: Provide backlog support
ppc/xive: Implement TM_PULL_OS_CTX special command
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190709152053.16670-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Rebased onto merge commit 95a9457fd44; missed instances of qom/cpu.h
in comments replaced]
PHBs already take care of clearing the MSIs from the bitmap during reset
or unplug. No need to do this globally from the machine code. Rather add
an assert to ensure that PHBs have acted as expected.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156415228966.1064338.190189424190233355.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[dwg: Fix crash in qtest case where spapr->irq_map can be NULL at the
new assert()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This has been useful to modify and test the Linux pseries suspend
code but it requires modification to the guest to call it (due to
being gated by other unimplemented features). It is not otherwise
used by Linux yet, but work is slowly progressing there.
This allows a (lightly modified) guest kernel to suspend with
`echo mem > /sys/power/state` and be resumed with system_wakeup
monitor command.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20190722061752.22114-2-npiggin@gmail.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Waking from suspend is not logically a machine reset on all machines,
particularly in the paravirtualized case rather than hardware
emulated. The ppc spapr machine for example just invokes hypervisor
to suspend, and expects that call to return with the machine in the
same state (modulo some possible migration and reconfiguration
details).
Implement a machine ->wakeup method and use that if it exists.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20190722053215.20808-2-npiggin@gmail.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Provide a better output of the XIVE END structures including the
escalation information and extend the PowerNV machine 'info pic'
command with a dump of the END EAS table used for escalations.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190718115420.19919-9-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When the 's' bit is set the escalation is said to be 'silent' or
'silent/gather'. In such configuration, the notification sequence is
skipped and only the escalation sequence is performed. This is used to
configure all the EQs of a vCPU to escalate on a single EQ which will
then target the hypervisor.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190718115420.19919-8-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When the 'u' bit is set the escalation is said to be 'unconditional'
which means that the ESe PQ bits are not used. Introduce a
xive_router_end_es_notify() routine to share code with the ESn
notification.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190718115420.19919-7-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This implements the H_TPM_COMM hypercall, which is used by an
Ultravisor to pass TPM commands directly to the host's TPM device, or
a TPM Resource Manager associated with the device.
This also introduces a new virtual device, spapr-tpm-proxy, which
is used to configure the host TPM path to be used to service
requests sent by H_TPM_COMM hcalls, for example:
-device spapr-tpm-proxy,id=tpmp0,host-path=/dev/tpmrm0
By default, no spapr-tpm-proxy will be created, and hcalls will return
H_FUNCTION.
The full specification for this hypercall can be found in
docs/specs/ppc-spapr-uv-hcalls.txt
Since SVM-related hcalls like H_TPM_COMM use a reserved range of
0xEF00-0xEF80, we introduce a separate hcall table here to handle
them.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com
Message-Id: <20190717205842.17827-3-mdroth@linux.vnet.ibm.com>
[dwg: Corrected #include for upstream change]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
H_PROD is added, and H_CEDE is modified to test the prod bit
according to PAPR.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20190718034214.14948-3-npiggin@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Implement cpu_exec_enter/exit on ppc which calls into new methods of
the same name in PPCVirtualHypervisorClass. These are used by spapr
to implement the splpar VPA dispatch counter initially.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20190718034214.14948-2-npiggin@gmail.com>
[dwg: Removed unnecessary CONFIG_USER_ONLY checks as suggested by gkurz]
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Finally add audiodev= options to audio frontends so users can specify
which backend to use when multiple backends exist. Not specifying an
audiodev= option currently causes the first audiodev to be used, this is
fixed in the next commit.
Example usage: -audiodev pa,id=foo -device AC97,audiodev=foo
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: d64db52dda2d0e9d97bc5ab1dd9adf724280fea1.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add 4.2 machine types for arm/i440fx/q35/s390x/spapr.
For i440fx and q35, unversioned cpu models are still translated
to -v1, as 0788a56bd1 ("i386: Make unversioned CPU models be
aliases") states this should only transition to the latest cpu
model version in 4.3 (or later).
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190724103524.20916-1-cohuck@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Prior patch resets can_do_io flag at the TB entry. Therefore there is no
need in resetting this flag at the end of the block.
This patch removes redundant gen_io_end calls.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <156404429499.18669.13404064982854123855.stgit@pasha-Precision-3630-Tower>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@gmail.com>
Most of IO instructions can be executed only at the end of the block in
icount mode. Therefore translator can set cpu_can_io flag when translating
the last instruction.
But when the blocks are chained, then this flag is not reset and may
remain set at the beginning of the next block.
This patch resets the flag at the entry of any translation block,
making I/O operations impossible by default.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
--
v2 changes:
- reset can_do_io at the start of every TB (suggested by Paolo Bonzini)
Message-Id: <156404428943.18669.15747009371169578935.stgit@pasha-Precision-3630-Tower>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch renames replay_get_current_step() and related variables
to make these names consistent with existing 'icount' command line
option and future record/replay hmp/qmp commands.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <156404428377.18669.15476429889039912070.stgit@pasha-Precision-3630-Tower>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
icount-based record/replay uses qemu_clock_deadline_ns_all to measure
the period until vCPU may be interrupted.
This function takes in account the virtual timers, because they belong
to the virtual devices that may generate interrupt request or affect
the virtual machine state.
However, there are a subset of virtual timers, that are marked with
'external' flag. These do not change the virtual machine state and
only based on virtual clock. Calculating the deadling using the external
timers breaks the determinism, because they do not belong to the replayed
part of the virtual machine.
This patch fixes the deadline calculation for this case by adding
new parameter for skipping the external timers when it is needed.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
--
v2 changes:
- added new parameter for timer attribute mask
Message-Id: <156404426682.18669.17014100602930969222.stgit@pasha-Precision-3630-Tower>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The reset notifiers kept a 'last' counter to notice jumps;
now that we've remove the notifier we don't need to keep 'last'.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190724115823.4199-5-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the reset notifer from the core qemu-timer code.
The only user was mc146818 and we've just remove it's use.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190724115823.4199-3-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is a race between TCG and accesses to the dirty log:
vCPU thread reader thread
----------------------- -----------------------
TLB check -> slow path
notdirty_mem_write
write to RAM
set dirty flag
clear dirty flag
TLB check -> fast path
read memory
write to RAM
Fortunately, in order to fix it, no change is required to the
vCPU thread. However, the reader thread must delay the read after
the vCPU thread has finished the write. This can be approximated
conservatively by run_on_cpu, which waits for the end of the current
translation block.
A similar technique is used by KVM, which has to do a synchronous TLB
flush after doing a test-and-clear of the dirty-page flags.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch moves the define of target access alignment earlier from
target/foo/cpu.h to configure.
Suggested in Richard Henderson's reply to "[PATCH 1/4] tcg: TCGMemOp is now
accelerator independent MemOp"
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Message-Id: <11e818d38ebc40e986cfa62dd7d0afdc@tpw09926dag18e.domain1.systemhost.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: tony.nguyen@bt.com <tony.nguyen@bt.com>
