Commit Graph

1523 Commits

Author SHA1 Message Date
Suraj Jitindar Singh b9a477b725 ppc/spapr_caps: Add SPAPR_CAP_NESTED_KVM_HV
Add the spapr cap SPAPR_CAP_NESTED_KVM_HV to be used to control the
availability of nested kvm-hv to the level 1 (L1) guest.

Assuming a hypervisor with support enabled an L1 guest can be allowed to
use the kvm-hv module (and thus run it's own kvm-hv guests) by setting:
-machine pseries,cap-nested-hv=true
or disabled with:
-machine pseries,cap-nested-hv=false

Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-11-08 13:08:35 +11:00
Peter Maydell 09a333ee3d hw/ppc/ppc440_uc: Remove dead code in sdram_size()
Coverity points out in CID 1390588 that the test for sh == 0
in sdram_size() can never fire, because we calculate sh with
    sh = 1024 - ((bcr >> 6) & 0x3ff);
which must result in a value between 1 and 1024 inclusive.

Without the relevant manual for the SoC, we're not completely
sure of the correct behaviour here, but we can remove the
dead code without changing how QEMU currently behaves.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-11-08 12:04:40 +11:00
Prasad J Pandit d07945e78e ppc/pnv: check size before data buffer access
While performing PowerNV memory r/w operations, the access length
'sz' could exceed the data[4] buffer size. Add check to avoid OOB
access.

Reported-by: Moguofang <moguofang@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-11-08 12:04:40 +11:00
Peter Maydell 1bbd6272a1 hw/ppc/mac_newworld: Free openpic_irqs array after use
In ppc_core99_init(), we allocate an openpic_irqs array, which
we then use to collect up the various qemu_irqs which we're
going to connect to the interrupt controller. Once we've
called sysbus_connect_irq() to connect them all up, the
array is no longer required, but we forgot to free it.

Since board init is only run once at startup, the memory
leak is not a significant one.

Spotted by Coverity: CID 1192916.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-11-08 12:04:40 +11:00
Greg Kurz 4fc4c6a53d spapr_pci: convert g_malloc() to g_new()
When allocating an array, it is a recommended coding practice to call
g_new(FooType, n) instead of g_malloc(n * sizeof(FooType)) because
it takes care to avoid overflow when calculating the size of the
allocated block and it returns FooType *, which allows the compiler
to perform type checking.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-11-08 12:04:40 +11:00
Thomas Huth 0e947a89ce hw/ppc/spapr_rng: Introduce CONFIG_SPAPR_RNG switch for spapr_rng.c
The spapr-rng device is suboptimal when compared to virtio-rng, so
users might want to disable it in their builds. Thus let's introduce
a proper CONFIG switch to allow us to compile QEMU without this device.
The function spapr_rng_populate_dt is required for linking, so move it
to a different location.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-11-08 12:04:40 +11:00
Cédric Le Goater 95ba556707 ppc4xx_pci: convert SysBus init method to a realize method
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-11-08 12:04:40 +11:00
Cédric Le Goater 7b0f4ec9d3 ppc440_pcix: convert SysBus init method to a realize method
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-11-08 12:04:40 +11:00
David Hildenbrand 946d6154ab memory-device: add and use memory_device_get_region_size()
We will factor out get_memory_region() from pc-dimm to memory device code
soon. Once that is done, get_region_size() can be implemented
generically and essentially be replaced by
memory_device_get_region_size (and work only on get_memory_region()).

We have some users of get_memory_region() (spapr and pc-dimm code) that are
only interested in the size. So let's rework them to use
memory_device_get_region_size() first, then we can factor out
get_memory_region() and eventually remove get_region_size() without
touching the same code multiple times.

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181005092024.14344-10-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-24 06:44:59 -03:00
David Hildenbrand fd3416f5eb pc-dimm: pass PCDIMMDevice to pc_dimm_.*plug
We're plugging/unplugging a PCDIMMDevice, so directly pass this type
instead of a more generic DeviceState.

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181005092024.14344-5-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-24 06:44:59 -03:00
Markus Armbruster 4b5766488f error: Fix use of error_prepend() with &error_fatal, &error_abort
From include/qapi/error.h:

  * Pass an existing error to the caller with the message modified:
  *     error_propagate(errp, err);
  *     error_prepend(errp, "Could not frobnicate '%s': ", name);

Fei Li pointed out that doing error_propagate() first doesn't work
well when @errp is &error_fatal or &error_abort: the error_prepend()
is never reached.

Since I doubt fixing the documentation will stop people from getting
it wrong, introduce error_propagate_prepend(), in the hope that it
lures people away from using its constituents in the wrong order.
Update the instructions in error.h accordingly.

Convert existing error_prepend() next to error_propagate to
error_propagate_prepend().  If any of these get reached with
&error_fatal or &error_abort, the error messages improve.  I didn't
check whether that's the case anywhere.

Cc: Fei Li <fli@suse.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181017082702.5581-2-armbru@redhat.com>
2018-10-19 14:51:34 +02:00
Peter Maydell 506e4a00de ppc patch queue 2018-09-25
Here are the accumulated ppc target patches for the last several
 weeks. Highlights are:
    * A number of 40p / PReP cleanups
    * Preliminary irq rework on the pseries machine towards the new
      XIVE interrupt controller
 
 There are a few patches which make small changes to generic device and
 arm code as prerequisites to the 40p interrupt routing cleanup.  They
 have acks from the relevant maintainers.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEdfRlhq5hpmzETofcbDjKyiDZs5IFAlup3PYACgkQbDjKyiDZ
 s5IcYQ//fp79LhIXUKfJuGasVg1K8X795s3nD8vZ76z7FV2kNyHvOCcTsLn0Ccrp
 WJLdXdZ0ErY87vJPfHckii9pXOX8J38nV5EFCElSLslx6gCndQZdQX2WY3luwIzq
 afiKMERwTkCcqFXXPgweijhhuAU+roay8xdO/ZBO52ogzGaZalTFjG4l9a0DZMSm
 ZceDrLrKw6GOaxntLptcn2+Ncuwpm0WSpLyL+bGNAzSAbqdn1dhHQ9UBrcSMteWj
 df8J7CX63CFL2MwbQE3RyXeKaomdHabG+QgEVMlS4dpXVUx++ciMtrwZTX1mMDlI
 DA9+5u6TcRMz34hN8lWk2O05scOVp8965BcfdeRBYAOTDS4ztiZJ9spKkIV0lHfe
 rkgo7F1OsqoQhs9QrLYp0zZYn1OIhHWrbhk/DQptCJMRHk8mct4v2FcyGecU0e1Z
 7SlJErxHXmar83PCCJXhtYHthDxN+dTHUW0bbrF4IjysfK+poX5hvvFEjyHGPIJL
 duytwgEnnrBOFM7f7mdfH1LKeKzm1ji8nu7g2IsPAXC0xuFaq+d0fZWUWjymSPku
 k5k5UUPs8KLtP9XY2qhO0vxBWl5d+CTam19FWVqHjRAp5WqjmoLxWnkofupcT0Yv
 LcoHH2Ad9K8e0F4nA4UCYdJwfGH3qO+eBzmBR4+HZOuT1gVvRuw=
 =A62f
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20180925' into staging

ppc patch queue 2018-09-25

Here are the accumulated ppc target patches for the last several
weeks. Highlights are:
   * A number of 40p / PReP cleanups
   * Preliminary irq rework on the pseries machine towards the new
     XIVE interrupt controller

There are a few patches which make small changes to generic device and
arm code as prerequisites to the 40p interrupt routing cleanup.  They
have acks from the relevant maintainers.

# gpg: Signature made Tue 25 Sep 2018 08:00:06 BST
# gpg:                using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-3.1-20180925:
  40p: add fixed IRQ routing for LSI SCSI device
  lsi53c895a: add optional external IRQ via qdev
  scsi: remove unused lsi53c895a_create() and lsi53c810_create() functions
  scsi: move lsi53c8xx_create() callers to lsi53c8xx_handle_legacy_cmdline()
  scsi: add lsi53c8xx_handle_legacy_cmdline() function
  sm501: Adjust endianness of pixel value in rectangle fill
  spapr_pci: add an extra 'nr_msis' argument to spapr_populate_pci_dt
  spapr: increase the size of the IRQ number space
  spapr: introduce a spapr_irq class 'nr_msis' attribute
  40p: use OR gate to wire up raven PCI interrupts
  raven: some minor IRQ-related tidy-ups
  hw/ppc: on 40p machine, change default firmware to OpenBIOS
  target/ppc/cpu-models: Re-group the 970 CPUs together again
  Record history of ppcemb target in common.json

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-25 13:30:45 +01:00
Peter Maydell 2f831d0498 Error reporting & miscellaneous patches for 2018-09-24
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJbqP/iAAoJEDhwtADrkYZTDTQP/jidzPBq+9SbQTkP3/6DNdyq
 3amvEA0lNlowGz+VQtTPjG1Sw+wr5PRFFjthueX4EXCgTih9db5Rd6Daiqt9uuh4
 ipep7OVTcyMOErHzyosIIwQAte2ERiunpwXOAcahxInJ4XBlxyJAiJTZXHQb1v+u
 zKa3PpKi3fLcqBs3wKn8AJmp5HLTYOM6/LK870S65Rzx20AbifBH/6yQPkdrMAL2
 lw204RasdYCiJo045n6pwZ0mBMT1d33VAmSqPUaeoOWabLCzmbZvcQNwUqtVleh6
 5IoAxjFhrixksdg67+HMyFyJH5Nt8SkTeOpqN4D+dpj7y3BLGSUzvV3mBEBSfinm
 nvyfjVkxX4xRNw4mgm03H2qg5g3FACDQVz+g5uLDAZELlz9POCnOTFJuf/n++u3q
 zcxOqCg2U99KiyF51PMRu9yPH/zDNNFxmrEY7dFkuAycS3EWk+VK63pXnNUkx3xe
 0T8uZA4Cvhn84hLNDFyX/DzILKFb0bRSUw6zAhUYb44oD6roFlp8rgTauNECa9CO
 GcgvJKXyk6mMDEHkSKSWy51doVEn0vqqzEc9w6/QPwxsXNMUWXEQAv/BVaK7To/J
 JlSxC/C/jda4pt6zDFks6grac8AT6LBIFUrp6HpF84gSldEF4OuFbJhg9iuTyarz
 ea5pvvZGJHQvnLATg5kK
 =2oaJ
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2018-09-24' into staging

Error reporting & miscellaneous patches for 2018-09-24

# gpg: Signature made Mon 24 Sep 2018 16:16:50 BST
# gpg:                using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-error-2018-09-24:
  MAINTAINERS: Fix F: patterns that don't match anything
  Drop "qemu:" prefix from error_report() arguments
  qemu-error: make use of {error, warn}_report_once_cond
  qemu-error: add {error, warn}_report_once_cond

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-25 11:37:39 +01:00
Mark Cave-Ayland 0358687b16 40p: add fixed IRQ routing for LSI SCSI device
Whilst the PReP specification describes how all PCI IRQs are routed via IRQ
15 on the interrupt controller, the real 40p machine has a routing quirk in
that the LSI SCSI device is routed directly to IRQ 13.

Enable the external IRQ for the LSI SCSI device by wiring up the IRQ with
qdev to the relevant interrupt controller gpio.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-09-25 11:12:25 +10:00
Mark Cave-Ayland 877eb21d56 scsi: move lsi53c8xx_create() callers to lsi53c8xx_handle_legacy_cmdline()
As part of commits a64aa5785d "hw: Deprecate -drive if=scsi with non-onboard
HBAs" and b891538e81 "hw/ppc/prep: Fix implicit creation of "-drive if=scsi"
devices" the lsi53c895a_create() and lsi53c810_create() functions were added
to wrap pci_create_simple() and scsi_bus_legacy_handle_cmdline().

Unfortunately this prevents us from changing qdev properties on the device
and/or changing the PCI configuration. By switching over to using the new
lsi53c8xx_handle_legacy_cmdline() function then the caller can now configure
and realize the LSI SCSI device exactly as required.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Peter Maydell <peter.maydell@linaro.org> [arm parts]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-09-25 11:12:25 +10:00
Cédric Le Goater 0976efd51b spapr_pci: add an extra 'nr_msis' argument to spapr_populate_pci_dt
So that we don't have to call qdev_get_machine() to get the machine
class and the sPAPRIrq backend holding the number of MSIs.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-09-25 11:12:25 +10:00
Cédric Le Goater ae83740237 spapr: increase the size of the IRQ number space
The new layout using static IRQ number does not leave much space to
the dynamic MSI range, only 0x100 IRQ numbers. Increase the total
number of IRQS for newer machines and introduce a legacy XICS backend
for pre-3.1 machines to maintain compatibility.

For the old backend, provide a 'nr_msis' value covering the full IRQ
number space as it does not use the bitmap allocator to allocate MSI
interrupt numbers.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-09-25 11:12:25 +10:00
Cédric Le Goater e39de895f6 spapr: introduce a spapr_irq class 'nr_msis' attribute
The number of MSI interrupts a sPAPR machine can allocate is in direct
relation with the number of interrupts of the sPAPRIrq backend. Define
statically this value at the sPAPRIrq class level and use it for the
"ibm,pe-total-#msi" property of the sPAPR PHB.

According to the PAPR specs, "ibm,pe-total-#msi" defines the maximum
number of MSIs that are available to the PE. We choose to advertise
the maximum number of MSIs that are available to the machine for
simplicity of the model and to avoid segmenting the MSI interrupt pool
which can be easily shared. If the pool limit is reached, it can be
extended dynamically.

Finally, remove XICS_IRQS_SPAPR which is now unused.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-09-25 11:12:25 +10:00
Mark Cave-Ayland f40b83a4e3 40p: use OR gate to wire up raven PCI interrupts
According to the PReP specification section 6.1.6 "System Interrupt
Assignments", all PCI interrupts are routed via IRQ 15.

Instead of mapping each PCI IRQ separately, we introduce an OR gate within the
raven PCI host bridge and then wire the single output of the OR gate to the
interrupt controller.

Note that whilst the (now deprecated) PReP machine still exists we still need
to preserve the old IRQ routing. This is done by adding a new "is-legacy-prep"
property to the raven PCI host bridge which is set to true for the PReP
machine.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-09-25 11:12:25 +10:00
Hervé Poussineau 8e93b2c393 hw/ppc: on 40p machine, change default firmware to OpenBIOS
OpenBIOS gained 40p support in 5b20e4cace
Use it, instead of relying on an unmaintained and very limited firmware.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-09-25 11:12:25 +10:00
Peter Maydell 9c36281bc5 ppc patch queue 2018-09-07
Here's another pull request for qemu-3.1.  No real theme here, just an
 assortment of various fixes.  Probably the most notable thing is the
 removal of the ppcemb target which has been deprecated for some time
 now.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEdfRlhq5hpmzETofcbDjKyiDZs5IFAluSKPoACgkQbDjKyiDZ
 s5JSpRAAhWvxLM6OoTdhAaPKhlKrIzWexWNI8efJNWfXvHnbHBxs8tk+hnJOZVsU
 m00hfFMKMA0/4JMURrbYsCiyaq+r+Ws8oEbLDVKQdng6LNeUrLq7uC0rv41bW3CC
 1BTqTX16lvhPsg1Sz8mh6IGwCIgRiV8zgvQ4iCc3GCJidI2A+3uLvW5hAndvDdjb
 3lq6drg23LXZ6z/ou7hPynKmV6tFTlxSnB957LCnPGFACZeJKbuoRHPP30IrWwY+
 nOQ1GTvenouGvEKI5gsC13qFWYcoNPPfc7NZFtx1fvxiMpkOj7R5hg9oStT2Ya6u
 MVRwcp/XA2MF+2NnJ8TZOkAV7+1JidhRirsKFjcn1JqftWSxJOKA0weWuNQgdQNY
 lJzyZZejEJCHn0NgOq9ZRjOP4U6iIcSlTurfXoronhw1q7yEBkYkS+JpLToLLsid
 9qwxlBAfUfQ8E1wR8RnM6ATygVp2Z2ToL+70Rc7xzq6/R8kYFSzuhyaI1GUUtPGW
 ZPwp3GRYWJE/xOK3z1YAndrN8FlNxqz3Cov3vtH118aBatWAT+PRVlouOB1/aF3T
 KfV8Kme5KQrMGuj/RDLGLOeQi0e8wqBtVIhsESpHdocC6uo28H5gNXxptyLJPA04
 dJwWvaQf/J7eIuChhuFygiTzMnQyJA1f77jlExpKfxKKQwUpHf4=
 =WnE4
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20180907' into staging

ppc patch queue 2018-09-07

Here's another pull request for qemu-3.1.  No real theme here, just an
assortment of various fixes.  Probably the most notable thing is the
removal of the ppcemb target which has been deprecated for some time
now.

# gpg: Signature made Fri 07 Sep 2018 08:30:02 BST
# gpg:                using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-3.1-20180907:
  target-ppc: Extend HWCAP2 bits for ISA 3.0
  target/ppc/kvm: set vcpu as online/offline
  Fix a deadlock case in the CPU hotplug flow
  spapr: Correct reference count on spapr-cpu-core
  mac_newworld: implement custom FWPathProvider
  uninorth: add ofw-addr property to allow correct fw path generation
  mac_oldworld: implement custom FWPathProvider
  grackle: set device fw_name and address for correct fw path generation
  macio: add addr property to macio IDE object
  macio: add macio bus to help with fw path generation
  macio: move MACIOIDEState type declarations to macio.h
  spapr_pci: fix potential NULL pointer dereference
  spapr: fix leak of rev array
  ppc: Remove deprecated ppcemb target

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-24 17:14:10 +01:00
Mao Zhongyi 371b74e221 Drop "qemu:" prefix from error_report() arguments
error_report and friends already add a "qemu-system-xxx" prefix
to the string, so a "qemu:" prefix is redundant in the string.
Just drop it.

Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1537495530-580-1-git-send-email-maozhongyi@cmss.chinamobile.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-09-24 17:13:07 +02:00
Nikunj A Dadhania a84f71793a target/ppc/kvm: set vcpu as online/offline
Set the newly added register(KVM_REG_PPC_ONLINE) to indicate if the vcpu is
online(1) or offline(0)

KVM will use this information to set the RWMR register, which controls the PURR
and SPURR accumulation.

CC: paulus@samba.org
Signed-off-by: Nikunj A Dadhania <nikunj@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-09-05 16:06:19 +10:00
Jose Ricardo Ziviani b12a4efb76 Fix a deadlock case in the CPU hotplug flow
We need to set cs->halted to 1 before calling ppc_set_compat. The reason
is that ppc_set_compat kicks up the new thread created to manage the
hotplugged KVM virtual CPU and the code drives directly to KVM_RUN
ioctl. When cs->halted is 1, the code:

int kvm_cpu_exec(CPUState *cpu)
...
     if (kvm_arch_process_async_events(cpu)) {
         atomic_set(&cpu->exit_request, 0);
         return EXCP_HLT;
     }
...

returns before it reaches KVM_RUN, giving time to the main thread to
finish its job. Otherwise we can fall in a deadlock because the KVM
thread will issue the KVM_RUN ioctl while the main thread is setting up
KVM registers. Depending on how these jobs are scheduled we'll end up
freezing QEMU.

The following output shows kvm_vcpu_ioctl sleeping because it cannot get
the mutex and never will.
PS: kvm_vcpu_ioctl was triggered kvm_set_one_reg - compat_pvr.

STATE: TASK_UNINTERRUPTIBLE|TASK_WAKEKILL

PID: 61564  TASK: c000003e981e0780  CPU: 48  COMMAND: "qemu-system-ppc"
 #0 [c000003e982679a0] __schedule at c000000000b10a44
 #1 [c000003e98267a60] schedule at c000000000b113a8
 #2 [c000003e98267a90] schedule_preempt_disabled at c000000000b11910
 #3 [c000003e98267ab0] __mutex_lock at c000000000b132ec
 #4 [c000003e98267bc0] kvm_vcpu_ioctl at c00800000ea03140 [kvm]
 #5 [c000003e98267d20] do_vfs_ioctl at c000000000407d30
 #6 [c000003e98267dc0] ksys_ioctl at c000000000408674
 #7 [c000003e98267e10] sys_ioctl at c0000000004086f8
 #8 [c000003e98267e30] system_call at c00000000000b488

crash> struct -x kvm.vcpus 0xc000003da0000000
vcpus = {0xc000003db4880000, 0xc000003d52b80000, 0xc0000039e9c80000, 0xc000003d0e200000, 0xc000003d58280000, 0x0, 0x0, ...}

crash> struct -x kvm_vcpu.mutex.owner 0xc000003d58280000
  mutex.owner = {
    counter = 0xc000003a23a5c881 <- flag 1: waiters
  },

crash> bt 0xc000003a23a5c880
PID: 61579  TASK: c000003a23a5c880  CPU: 9   COMMAND: "CPU 4/KVM"
(active)

crash> struct -x kvm_vcpu.mutex.wait_list 0xc000003d58280000
  mutex.wait_list = {
    next = 0xc000003e98267b10,
    prev = 0xc000003e98267b10
  },

crash> struct -x mutex_waiter.task 0xc000003e98267b10
  task = 0xc000003e981e0780

The following command-line was used to reproduce the problem (note: gdb
and trace can change the results).

 $ qemu-ppc/build/ppc64-softmmu/qemu-system-ppc64 -cpu host \
     -enable-kvm -m 4096 \
     -smp 4,maxcpus=8,sockets=1,cores=2,threads=4 \
     -display none -nographic \
     -drive file=disk1.qcow2,format=qcow2
 ...
 (qemu) device_add host-spapr-cpu-core,core-id=4
[no interaction is possible after it, only SIGKILL to take the terminal
back]

Signed-off-by: Jose Ricardo Ziviani <joserz@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-09-03 11:46:43 +10:00
Sam Bobroff ecda255eba spapr: Correct reference count on spapr-cpu-core
spapr_init_cpus() currently creates spapr-cpu-core objects via
object_new() and setting their realized property to true. This leaves
their reference count at two, because object_new() adds an initial
reference and the realization attaches them to a default parent object
which also increments the reference count.

This causes a problem if one of these cores is hot unplugged: no
delete event is generated for it because it's reference count doesn't
reach zero when it is detached from it's parent.

Correct this by adding a call to object_unref() in spapr_init_cpus().

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-30 15:58:42 +10:00
Mark Cave-Ayland 5d19be6c70 mac_newworld: implement custom FWPathProvider
This enables the correct generation of bootdevice fw paths for in-built IDE
and virtio-pci-blk devices suitable for OpenBIOS.

Note we also set the MachineClass ignore_boot_device_suffixes property to true
since an additional disk node should not be added except for virtio devices.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-30 10:42:18 +10:00
Mark Cave-Ayland 03756c840e uninorth: add ofw-addr property to allow correct fw path generation
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-30 10:42:18 +10:00
Mark Cave-Ayland bbcc635fcd mac_oldworld: implement custom FWPathProvider
This enables the correct generation of bootdevice fw paths for in-built IDE
and virtio-pci-blk devices suitable for OpenBIOS.

Note we also set the MachineClass ignore_boot_device_suffixes property to true
since an additional disk node should not be added except for virtio devices.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-30 10:42:18 +10:00
Mark Cave-Ayland ac43eb2e13 grackle: set device fw_name and address for correct fw path generation
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-30 10:42:18 +10:00
Mark Cave-Ayland 9b164a4667 macio: move MACIOIDEState type declarations to macio.h
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-30 10:42:18 +10:00
Peter Xu 3ab72385b2 qapi: Drop qapi_event_send_FOO()'s Error ** argument
The generated qapi_event_send_FOO() take an Error ** argument.  They
can't actually fail, because all they do with the argument is passing it
to functions that can't fail: the QObject output visitor, and the
@qmp_emit callback, which is either monitor_qapi_event_queue() or
event_test_emit().

Drop the argument, and pass &error_abort to the QObject output visitor
and @qmp_emit instead.

Suggested-by: Eric Blake <eblake@redhat.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180815133747.25032-4-peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message rewritten, update to qapi-code-gen.txt corrected]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-08-28 18:21:38 +02:00
Greg Kurz bc9b1f10f2 spapr_pci: fix potential NULL pointer dereference
Commit 2c88b098e7 added a call to SPAPR_MACHINE_GET_CLASS(spapr) in
spapr_phb_realize() before we check spapr isn't NULL. This causes QEMU
to crash when starting a non-pseries machine with a sPAPR PHB.

This could be fixed by setting the smc variable after the null check,
but it seems more explicit to use a ternary operator to skip the call
to SPAPR_MACHINE_GET_CLASS() if spapr is NULL, since spapr_phb_realize()
will return immediately in this case.

This was reported by Coverity (CID 1395170 and 1395183).

Fixes: 2c88b098e7
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-28 11:31:23 +10:00
Emilio G. Cota eceba3477e spapr: fix leak of rev array
Introduced in 04d595b300 ("spapr: do not use CPU_FOREACH_REVERSE",
2018-08-23)

Fixes: CID1395181
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-28 11:31:23 +10:00
Thomas Huth a69dc537cc ppc: Remove deprecated ppcemb target
There is no known available OS for ppc around anymore that uses page
sizes below 4k, so it does not make much sense that we keep wasting
our time on building and testing the ppcemb-softmmu target. It has
been deprecated since two releases, and nobody complained, so let's
remove this now.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-28 11:31:23 +10:00
Peter Maydell 3c825bb7c1 * x86 TCG fixes for 64-bit call gates (Andrew)
* qumu-guest-agent freeze-hook tweak (Christian)
 * pm_smbus improvements (Corey)
 * Move validation to pre_plug for pc-dimm (David)
 * Fix memory leaks (Eduardo, Marc-André)
 * synchronization profiler (Emilio)
 * Convert the CPU list to RCU (Emilio)
 * LSI support for PPR Extended Message (George)
 * vhost-scsi support for protection information (Greg)
 * Mark mptsas as a storage device in the help (Guenter)
 * checkpatch tweak cherry-picked from Linux (me)
 * Typos, cleanups and dead-code removal (Julia, Marc-André)
 * qemu-pr-helper support for old libmultipath (Murilo)
 * Annotate fallthroughs (me)
 * MemoryRegionOps cleanup (me, Peter)
 * Make s390 qtests independent from libqos, which doesn't actually support it (me)
 * Make cpu_get_ticks independent from BQL (me)
 * Introspection fixes (Thomas)
 * Support QEMU_MODULE_DIR environment variable (ryang)
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAlt+5OYUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroPtxwf8CQM/F+0L+EKeYfYcVgVZsDhhOkLj
 Pm61q0bZsWKLby5jCqIDYw7Z/vodJnSS1DO0slIRoXxvQ9DwlkbBnBy/aG/E9U0q
 WF1vbCezibDIt7sGcsu9F5zXU9eqe+E6dZfxFrv8FQSOFVxn34TfeJagWLCtzg0d
 LnVTF/e4zJD8IQiM7w6lJQxua3fz13ssPEg2KnMkguDhACMwvZ/K/cA2AJkHRMhY
 sroPMwLHlrF1NOoeCIrWxYUmSGCRCAy1DmiPGiiSs0yBq/dL0UkAa5Eu6HMQ7rgI
 zUff3JDmzEjixUSIEbpVRN+yPCN0/ACSOpJUrKLDxXbc4nZ+PBQ04YpyPQ==
 =UZiV
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* x86 TCG fixes for 64-bit call gates (Andrew)
* qumu-guest-agent freeze-hook tweak (Christian)
* pm_smbus improvements (Corey)
* Move validation to pre_plug for pc-dimm (David)
* Fix memory leaks (Eduardo, Marc-André)
* synchronization profiler (Emilio)
* Convert the CPU list to RCU (Emilio)
* LSI support for PPR Extended Message (George)
* vhost-scsi support for protection information (Greg)
* Mark mptsas as a storage device in the help (Guenter)
* checkpatch tweak cherry-picked from Linux (me)
* Typos, cleanups and dead-code removal (Julia, Marc-André)
* qemu-pr-helper support for old libmultipath (Murilo)
* Annotate fallthroughs (me)
* MemoryRegionOps cleanup (me, Peter)
* Make s390 qtests independent from libqos, which doesn't actually support it (me)
* Make cpu_get_ticks independent from BQL (me)
* Introspection fixes (Thomas)
* Support QEMU_MODULE_DIR environment variable (ryang)

# gpg: Signature made Thu 23 Aug 2018 17:46:30 BST
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (69 commits)
  KVM: cleanup unnecessary #ifdef KVM_CAP_...
  target/i386: update MPX flags when CPL changes
  i2c: pm_smbus: Add the ability to force block transfer enable
  i2c: pm_smbus: Don't delay host status register busy bit when interrupts are enabled
  i2c: pm_smbus: Add interrupt handling
  i2c: pm_smbus: Add block transfer capability
  i2c: pm_smbus: Make the I2C block read command read-only
  i2c: pm_smbus: Fix the semantics of block I2C transfers
  i2c: pm_smbus: Clean up some style issues
  pc-dimm: assign and verify the "addr" property during pre_plug
  pc: drop memory region alignment check for 0
  util/oslib-win32: indicate alignment for qemu_anon_ram_alloc()
  pc-dimm: assign and verify the "slot" property during pre_plug
  ipmi: Use proper struct reference for BT vmstate
  vhost-scsi: expose 't10_pi' property for VIRTIO_SCSI_F_T10_PI
  vhost-scsi: unify vhost-scsi get_features implementations
  vhost-user-scsi: move host_features into VHostSCSICommon
  cpus: allow cpu_get_ticks out of BQL
  cpus: protect TimerState writes with a spinlock
  seqlock: add QemuLockable support
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-23 19:03:54 +01:00
David Hildenbrand b0e624435b pc-dimm: assign and verify the "addr" property during pre_plug
We can assign and verify the address before realizing and trying to plug.
reading/writing the address property should never fail for DIMMs, so let's
reduce error handling a bit by using &error_abort. Getting access to the
memory region now might however fail. So forward errors from
get_memory_region() properly.

As all memory devices should use the alignment of the underlying memory
region for guest physical address asignment, do detection of the
alignment in pc_dimm_pre_plug(), but allow pc.c to overwrite the
alignment for compatibility handling.

Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180801133444.11269-5-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
David Hildenbrand 8f1ffe5be8 pc-dimm: assign and verify the "slot" property during pre_plug
We can assign and verify the slot before realizing and trying to plug.
reading/writing the slot property should never fail, so let's reduce
error handling a bit by using &error_abort.

To do this during pre_plug, add and use (x86, ppc) pc_dimm_pre_plug().

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180801133444.11269-2-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Emilio G. Cota 04d595b300 spapr: do not use CPU_FOREACH_REVERSE
This paves the way for implementing the CPU list with an RCU list,
which cannot be traversed in reverse order.

Note that this is the only caller of CPU_FOREACH_REVERSE.

Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180819091335.22863-11-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Thomas Huth 29551fdcf4 hw/timer/mc146818rtc: Fix introspection problem
There is currently a funny problem with the "mc146818rtc" device:
1) Start QEMU like this:
   qemu-system-ppc64 -M pseries -S
2) At the HMP monitor, enter "info qom-tree". Note that there is an
   entry for "/rtc (spapr-rtc)".
3) Introspect the mc146818rtc device like this:
   device_add mc146818rtc,help
4) Run "info qom-tree" again. The "/rtc" entry is gone now!

The rtc_finalize() function of the mc146818rtc device has two bugs: First,
it tries to remove a "rtc" property, while the rtc_realizefn() added a
"rtc-time" property instead. And second, it should have been done in an
unrealize function, not in a finalize function, to avoid that this causes
problems during introspection.

But since adding aliases to the global machine state should not be done
from a device's realize function anyway, let's rather fix this issue
by moving the creation of the alias to the code that creates the device
(and thus is run from the machine init functions instead), i.e. the
mc146818_rtc_init() function for most machines. The prep machines are
special, since the mc146818rtc device is created here in the realize
function of the i82378 device. Since we certainly don't want to add the
alias there, we add it to some code that is called from the ibm_40p_init()
machine init function instead.
Since the alias is now only created during the machine init, we can remove
the object_property_del() completely.

Fixes: 654a36d857
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1534419358-10932-5-git-send-email-thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 13:32:50 +02:00
Cédric Le Goater 2c88b098e7 spapr_pci: factorize the use of SPAPR_MACHINE_GET_CLASS()
It should save us some CPU cycles as these routines perform a lot of
checks.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-21 14:28:45 +10:00
Mark Cave-Ayland 74887ed918 mac_newworld: don't use legacy fw_cfg_init_mem() function
Instead initialise the device via qdev to allow us to set device properties
directly as required.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-21 14:28:45 +10:00
Mark Cave-Ayland 81a0705032 mac_oldworld: don't use legacy fw_cfg_init_mem() function
Instead initialise the device via qdev to allow us to set device properties
directly as required.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-21 14:28:45 +10:00
Mark Cave-Ayland 0f08085971 40p: don't use legacy fw_cfg_init_mem() function
Instead initialise the device via qdev to allow us to set device properties
directly as required.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-21 14:28:45 +10:00
Hervé Poussineau 54c86f5a48 hw/ppc: deprecate the machine type 'prep', replaced by '40p'
- prep machine is a fictional machine, so has no specifications. Which
  devices can be changed/added/removed without impact? Are interrupts
  correctly mapped?
- prep firmware (OHW) has support only for IDE drives (no SCSI).
  Booting from IDE has been broken approximatively 3 years ago, and nobody complained.
- OHW is limited on IDE boot to a specific set of OS loaders.
  These operating systems are of the 2004 time frame.
- OHW can use -kernel. Linux kernel freezes a long time after PS/2 mouse
  detection, and then screen becomes garbage. This was already broken in
  QEMU v2.7, 2 years ago, and nobody complained.

On the other side:
- 40p is a real machine, so emulation can be checked against
  hardware specifications
- OpenBIOS has support for SCSI block devices, including 40p LSI adapter
- OpenBIOS can start mostly all Linux kernels (including recent ones)
  and recent operating system (like NetBSD 7.1.2)

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
[dwg: Drop prep from boot-serial test to avoid deprecation warnings]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-21 14:28:45 +10:00
Cédric Le Goater ef01ed9d19 spapr: introduce a IRQ controller backend to the machine
This proposal moves all the related IRQ routines of the sPAPR machine
behind a sPAPR IRQ backend interface 'spapr_irq' to prepare for future
changes. First of which will be to increase the size of the IRQ number
space, then, will follow a new backend for the POWER9 XIVE IRQ controller.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-21 14:28:45 +10:00
Peter Maydell 69bd18f843 hw/ppc/ppc405_uc: Convert away from old_mmio
Convert the devices in ppc405_uc away from using the old_mmio
MemoryRegion accessors:

 * opba's 32-bit and 16-bit accessors were just calling the
   8-bit accessors and assembling a big-endian order number,
   which we can do by setting the .impl.max_access_size to 1
   and the endianness to DEVICE_BIG_ENDIAN, and letting the
   core memory code do the assembly
 * ppc405_gpio's accessors were all just stubs
 * ppc4xx_gpt's 8-bit and 16-bit accessors were treating the
   access as invalid, which we can do by setting the
   .valid.min_access_size and .valid.max_access_size fields

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-21 14:28:45 +10:00
Peter Maydell 878a460704 hw/ppc/ppc_boards: Don't use old_mmio for ref405ep_fpga
Switch the ref405ep_fpga device away from using the old_mmio
MemoryRegion accessors.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-21 14:28:45 +10:00
Peter Maydell 7d622ed3ff hw/ppc/prep: Remove ifdeffed-out stub of XCSR code
The prep machine has some code which is stubs of accessors
for XCSR registers. This has been disabled via #if 0
since commit b6b8bd1819 in 2004, and doesn't have any
actual interesting content. It also uses the deprecated
old_mmio accessor functions. Remove it entirely.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-21 14:28:45 +10:00
Cédric Le Goater 82cffa2eb2 spapr: introduce a fixed IRQ number space
This proposal introduces a new IRQ number space layout using static
numbers for all devices, depending on a device index, and a bitmap
allocator for the MSI IRQ numbers which are negotiated by the guest at
runtime.

As the VIO device model does not have a device index but a "reg"
property, we introduce a formula to compute an IRQ number from a "reg"
value. It should minimize most of the collisions.

The previous layout is kept in pre-3.1 machines raising the
'legacy_irq_allocation' machine class flag.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-21 14:28:45 +10:00
Cédric Le Goater d45360d93d spapr: Add a pseries-3.1 machine type
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-21 14:28:45 +10:00