qemu-e2k/hw
Laszlo Ersek ed6bb4b581 hw/pci-host/x86: extend the 64-bit PCI hole relative to the fw-assigned base
In commit 9fa99d2519 ("hw/pci-host: Fix x86 Host Bridges 64bit PCI
hole", 2017-11-16), we meant to expose such a 64-bit PCI MMIO aperture in
the ACPI DSDT that would be at least as large as the new "pci-hole64-size"
property (2GB on i440fx, 32GB on q35). The goal was to offer "enough"
64-bit MMIO aperture to the guest OS for hotplug purposes.

In that commit, we added or modified five functions:

- pc_pci_hole64_start(): shared between i440fx and q35. Provides a default
  64-bit base, which starts beyond the cold-plugged 64-bit RAM, and skips
  the DIMM hotplug area too (if any).

- i440fx_pcihost_get_pci_hole64_start(), q35_host_get_pci_hole64_start():
  board-specific 64-bit base property getters called abstractly by the
  ACPI generator. Both of these fall back to pc_pci_hole64_start() if the
  firmware didn't program any 64-bit hole (i.e. if the firmware didn't
  assign a 64-bit GPA to any MMIO BAR on any device). Otherwise, they
  honor the firmware's BAR assignments (i.e., they treat the lowest 64-bit
  GPA programmed by the firmware as the base address for the aperture).

- i440fx_pcihost_get_pci_hole64_end(), q35_host_get_pci_hole64_end():
  these intended to extend the aperture to our size recommendation,
  calculated relative to the base of the aperture.

Despite the original intent, i440fx_pcihost_get_pci_hole64_end() and
q35_host_get_pci_hole64_end() currently only extend the aperture relative
to the default base (pc_pci_hole64_start()), ignoring any programming done
by the firmware. This means that our size recommendation may not be met.
Fix it by honoring the firmware's address assignments.

The strange extension sizes were spotted by Alex, in the log of a guest
kernel running on top of OVMF (which prefers to assign 64-bit GPAs to
64-bit BARs).

This change only affects DSDT generation, therefore no new compat property
is being introduced.

Using an i440fx OVMF guest with 5GB RAM, an example _CRS change is:

> @@ -881,9 +881,9 @@
>              QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
>                  0x0000000000000000, // Granularity
>                  0x0000000800000000, // Range Minimum
> -                0x000000080001C0FF, // Range Maximum
> +                0x000000087FFFFFFF, // Range Maximum
>                  0x0000000000000000, // Translation Offset
> -                0x000000000001C100, // Length
> +                0x0000000080000000, // Length
>                  ,, , AddressRangeMemory, TypeStatic)
>          })
>          Device (GPE0)

(On i440fx, the low RAM split is at 3GB, in this case. Therefore, with 5GB
guest RAM and no DIMM hotplug range, pc_pci_hole64_start() returns 4 +
(5-3) = 6 GB. Adding the 2GB extension to that yields 8GB, which is below
the firmware-programmed base of 32GB, before the patch. Therefore, before
the patch, the extension is ineffective. After the patch, we add the 2GB
extension to the firmware-programmed base, namely 32GB.)

Using a q35 OVMF guest with 5GB RAM, an example _CRS change is:

> @@ -3162,9 +3162,9 @@
>              QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
>                  0x0000000000000000, // Granularity
>                  0x0000000800000000, // Range Minimum
> -                0x00000009BFFFFFFF, // Range Maximum
> +                0x0000000FFFFFFFFF, // Range Maximum
>                  0x0000000000000000, // Translation Offset
> -                0x00000001C0000000, // Length
> +                0x0000000800000000, // Length
>                  ,, , AddressRangeMemory, TypeStatic)
>          })
>          Device (GPE0)

(On Q35, the low RAM split is at 2GB. Therefore, with 5GB guest RAM and no
DIMM hotplug range, pc_pci_hole64_start() returns 4 + (5-2) = 7 GB. Adding
the 32GB extension to that yields 39GB (0x0000_0009_BFFF_FFFF + 1), before
the patch. After the patch, we add the 32GB extension to the
firmware-programmed base, namely 32GB.)

The ACPI test data for the bios-tables-test case that we added earlier in
this series are corrected too, as follows:

> @@ -3339,9 +3339,9 @@
>              QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
>                  0x0000000000000000, // Granularity
>                  0x0000000200000000, // Range Minimum
> -                0x00000009BFFFFFFF, // Range Maximum
> +                0x00000009FFFFFFFF, // Range Maximum
>                  0x0000000000000000, // Translation Offset
> -                0x00000007C0000000, // Length
> +                0x0000000800000000, // Length
>                  ,, , AddressRangeMemory, TypeStatic)
>          })
>          Device (GPE0)

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Fixes: 9fa99d2519
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-11-05 13:24:02 -05:00
..
9pfs fsdev: Clean up error reporting in qemu_fsdev_add() 2018-10-19 14:51:34 +02:00
acpi pci, pc, virtio: fixes, features 2018-09-24 18:49:11 +01:00
adc Include qapi/error.h exactly where needed 2018-02-09 13:50:17 +01:00
alpha hw/alpha/typhoon: Remove unuseful code 2018-10-24 06:44:59 -03:00
arm hw/arm: versal: Add a virtual Xilinx Versal board 2018-11-02 14:11:31 +00:00
audio audio: use TYPE_MV88W8618_AUDIO instead of hardcoded string 2018-10-29 13:50:15 +01:00
block vhost-user-blk: start vhost when guest kicks 2018-11-05 13:24:02 -05:00
bt hw/bt: Replace fprintf(stderr, "*\n" with error_report() 2018-01-22 09:51:00 +01:00
char hw/char: Implement nRF51 SoC UART 2018-11-02 14:03:33 +00:00
core Machine queue, 2018-10-25 2018-10-25 20:17:12 +01:00
cpu hw/cpu/a15mpcore: If CPU has EL2, enable it on the GIC and wire it up 2018-08-24 13:17:34 +01:00
cris hw/cris: Use the IEC binary prefix definitions 2018-07-02 15:41:15 +02:00
display vga: two fixes. 2018-10-29 12:59:15 +00:00
dma hw/dma/pl080: Remove hw_error() if DMA is enabled 2018-08-20 11:24:33 +01:00
gpio hw/i2c: Use DeviceClass::realize instead of I2CSlaveClass::init 2018-06-01 15:14:31 +02:00
hppa hw/hppa/dino: Remove unuseful code 2018-10-24 06:44:59 -03:00
hyperv hyperv_testdev: add SynIC message and event testmodes 2018-10-19 13:44:14 +02:00
i2c i2c: switch ddc to use the new edid generator 2018-10-15 09:57:33 +02:00
i386 x86_iommu/amd: Enable Guest virtual APIC support 2018-11-05 13:24:02 -05:00
ide replay: replay BH for IDE trim operation 2018-10-02 19:09:13 +02:00
input ps2: prevent changing irq state on save and load 2018-10-02 18:47:55 +02:00
intc target/arm: Move some system registers into a substructure 2018-10-24 07:50:16 +01:00
ipack hw/ipack: Use the IEC binary prefix definitions 2018-07-02 15:41:12 +02:00
ipmi ipmi: Use proper struct reference for BT vmstate 2018-08-23 18:46:25 +02:00
isa configs: Add a CONFIG_SMC37C669 switch for the "smc37c669-superio" device 2018-10-24 07:33:44 +01:00
lm32 hw/lm32: Use the IEC binary prefix definitions 2018-07-02 15:41:15 +02:00
m68k hw/m68k: Use the IEC binary prefix definitions 2018-07-02 15:41:14 +02:00
mem memory-device: trace when pre_plugging/plugging/unplugging 2018-10-24 06:44:59 -03:00
microblaze hw/microblaze/xlnx-zynqmp-pmu: Fix introspection problem in 'xlnx, zynqmp-pmu-soc' 2018-07-23 15:21:25 +01:00
mips hw/mips/malta: Remove unuseful code 2018-10-24 06:44:59 -03:00
misc pci-testdev: add optional memory bar 2018-11-05 13:24:02 -05:00
moxie change get_image_size return type to int64_t 2018-10-02 19:08:49 +02:00
net QEMU trivial patches collected between June and October 2018 2018-10-30 15:49:55 +00:00
nios2 hw/nios2: Use the IEC binary prefix definitions 2018-07-02 15:41:15 +02:00
nvram ppc: move at24c to its own CONFIG_ symbol 2018-10-30 09:12:09 +01:00
openrisc Change references to serial_hds[] to serial_hd() 2018-04-26 13:57:00 +01:00
pci qmp, hmp: make subsystem/system-vendor identities optional 2018-10-11 19:58:26 +01:00
pci-bridge hw/pci: add PCI resource reserve capability to legacy PCI bridge 2018-09-07 17:05:18 -04:00
pci-host hw/pci-host/x86: extend the 64-bit PCI hole relative to the fw-assigned base 2018-11-05 13:24:02 -05:00
pcmcia
ppc memory-device: add and use memory_device_get_region_size() 2018-10-24 06:44:59 -03:00
rdma config: split PVRDMA from RDMA 2018-08-18 18:01:34 +03:00
riscv RISC-V: Don't add NULL bootargs to device-tree 2018-10-17 13:02:30 -07:00
s390x hw/s390x: Include the tod-qemu also for builds with --disable-tcg 2018-10-12 11:32:19 +02:00
scsi scsi-disk: fix rerror/werror=ignore 2018-10-19 13:44:13 +02:00
sd ssi-sd: Make devices picking up backends unavailable with -device 2018-10-24 07:50:16 +01:00
sh4 hw/sh4/sh_pci: Use DeviceState::realize rather than SysBusDevice::init 2018-10-24 06:44:59 -03:00
smbios smbios: Clean up error handling in smbios_add() 2018-10-19 14:51:34 +02:00
sparc sun4m: don't use legacy fw_cfg_init_mem() function 2018-08-20 19:18:31 +01:00
sparc64 hw/sparc64/niagara: Model the I/O Bridge with the 'unimplemented_device' 2018-10-24 06:44:59 -03:00
ssi hw/ssi/xilinx_spi: Use DeviceState::realize rather than SysBusDevice::init 2018-10-24 06:44:59 -03:00
timer hw/timer/sun4v-rtc: Use DeviceState::realize rather than SysBusDevice::init 2018-10-24 06:44:59 -03:00
tpm tpm: Zero-init structure to avoid uninitialized variables in valgrind log 2018-10-30 17:34:22 -04:00
tricore hw/tricore: Use the IEC binary prefix definitions 2018-07-02 15:41:14 +02:00
unicore32 hw/input/i8042: Extract declarations from i386/pc.h into input/i8042.h 2018-03-12 16:12:48 +01:00
usb usb: fixes for ohci and smart card emulation. 2018-10-30 13:32:38 +00:00
vfio vfio: Clean up error reporting after previous commit 2018-10-19 14:51:34 +02:00
virtio Error reporting patches for 2018-10-22 2018-10-23 17:20:23 +01:00
watchdog qapi: Drop qapi_event_send_FOO()'s Error ** argument 2018-08-28 18:21:38 +02:00
xen xen: Use the PCI_DEVICE macro 2018-10-26 17:17:32 +02:00
xenpv hw/xen: Use the IEC binary prefix definitions 2018-07-02 15:41:13 +02:00
xtensa hw/xtensa: Use the IEC binary prefix definitions 2018-07-02 15:41:14 +02:00
Makefile.objs memory-device: introduce separate config option 2018-10-24 06:44:59 -03:00