OpenE2K/qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
QEMU With E2K User Support
36,248 Commits 9 Branches 0 Tags 459 MiB
C 83.1%
C++ 6.3%
Python 3.2%
Dylan 2.8%
Shell 1.6%
Other 2.8%
5224c88dd3
Go to file
Paolo Bonzini 5224c88dd3 apic: fix incorrect handling of ExtINT interrupts wrt processor priority 
This fixes another failure with ExtINT, demonstrated by QNX.  The failure
mode is as follows:
- IPI sent to cpu 0 (bit set in APIC irr)
- IPI accepted by cpu 0 (bit cleared in irr, set in isr)
- IPI sent to cpu 0 (bit set in both irr and isr)
- PIC interrupt sent to cpu 0

The PIC interrupt causes CPU_INTERRUPT_HARD to be set, but
apic_irq_pending observes that the highest pending APIC interrupt priority
(the IPI) is the same as the processor priority (since the IPI is still
being handled), so apic_get_interrupt returns a spurious interrupt rather
than the pending PIC interrupt. The result is an endless sequence of
spurious interrupts, since nothing will clear CPU_INTERRUPT_HARD.

Instead, ExtINT interrupts should have ignored the processor priority.
Calling apic_check_pic early in apic_get_interrupt ensures that
apic_deliver_pic_intr is called instead of delivering the spurious
interrupt.  apic_deliver_pic_intr then clears CPU_INTERRUPT_HARD if needed.

Reported-by: Richard Bilson <rbilson@qnx.com>
Tested-by: Richard Bilson <rbilson@qnx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-24 14:37:45 +01:00
audio
backends pci, pc, virtio, misc bugfixes 2014-09-18 20:02:01 +01:00
block block/raw-posix: Catch fsync() errors 2014-11-18 12:09:00 +01:00
bsd-user
default-configs mips: Remove CONFIG_VT82C686 from non-Fulong configs 2014-11-07 11:15:49 +00:00
disas disas/mips.c: disassemble MSA instructions 2014-11-03 11:48:35 +00:00
docs Tracing docs fix configure option and description 2014-11-18 14:05:54 +00:00
dtc@bc895d6d09
fpu softfloat: add functions corresponding to IEEE-2008 min/maxNumMag 2014-10-14 13:28:51 +01:00
fsdev
gdb-xml
hw apic: fix incorrect handling of ExtINT interrupts wrt processor priority 2014-11-24 14:37:45 +01:00
include exec: Handle multipage ranges in invalidate_and_set_dirty() 2014-11-18 10:19:12 +00:00
libcacard libcacard: fix resource leak 2014-11-14 12:15:40 +01:00
libdecnumber
linux-headers linux-headers: update to 3.18-rc5 2014-11-18 11:24:31 +00:00
linux-user linux-user: Fix up timer id handling 2014-11-11 08:13:09 +02:00
net net/socket: fix Uninitialized scalar variable 2014-11-21 10:50:54 +00:00
pc-bios Update OpenBIOS images 2014-11-15 13:01:44 +00:00
pixman@87eea99e44 pixman: update internal copy to pixman-0.32.6 2014-09-15 08:14:19 +02:00
po po: fix conflict with %.mo rule in rules.mak 2014-09-26 13:35:08 +02:00
qapi qapi: Complete BlkdebugEvent 2014-11-07 17:38:18 +01:00
qga qga: fix false negative argument passing 2014-11-17 11:41:25 +01:00
qobject
qom qom/cpu: remove the unused CPU hot-plug notifier 2014-11-02 13:44:11 +02:00
roms Update OpenBIOS images 2014-11-15 13:01:44 +00:00
scripts Tracing: Fix simpletrace.py error on tcg enabled binary traces 2014-11-18 14:05:58 +00:00
slirp slirp: udp: fix NULL pointer dereference because of uninitialized socket 2014-09-23 19:15:05 +01:00
stubs block: Code motion to get rid of stubs/blockdev.c 2014-10-20 13:41:26 +02:00
sysconfigs/target
target-alpha target-alpha: Use cpu_exec_interrupt qom hook 2014-09-25 18:54:21 +01:00
target-arm target-arm: handle address translations that start at level 3 2014-11-17 19:30:28 +00:00
target-cris target-cris/translate.c: fix out of bounds read 2014-11-17 13:59:23 +01:00
target-i386 apic: avoid getting out of halted state on masked PIC interrupts 2014-11-24 14:37:30 +01:00
target-lm32 gdbstub: Allow target CPUs to specify watchpoint STOP_BEFORE_ACCESS flag 2014-10-06 14:25:43 +01:00
target-m68k target-m68k: Use cpu_exec_interrupt qom hook 2014-09-25 18:54:21 +01:00
target-microblaze target-microblaze: Use cpu_exec_interrupt qom hook 2014-09-25 18:54:22 +01:00
target-mips target-mips: fix multiple TCG registers covering same data 2014-11-07 14:15:28 +00:00
target-moxie
target-openrisc target-openrisc: Use cpu_exec_interrupt qom hook 2014-09-25 18:54:22 +01:00
target-ppc target-ppc: Altivec's mtvscr Decodes Wrong Register 2014-11-20 14:52:01 +01:00
target-s390x s390x/kvm: Fix warning from sparse 2014-11-05 16:35:55 +01:00
target-sh4 target-sh4: Use cpu_exec_interrupt qom hook 2014-09-25 18:54:22 +01:00
target-sparc target-sparc: Use cpu_exec_interrupt qom hook 2014-09-25 18:54:22 +01:00
target-tricore target-tricore: Add instructions of BO opcode format 2014-10-20 12:25:07 +01:00
target-unicore32 target-unicore32: Use cpu_exec_interrupt qom hook 2014-09-25 18:54:22 +01:00
target-xtensa target-xtensa: add missing window check for entry 2014-11-10 17:59:13 +03:00
tcg tcg/mips: fix store softmmu slow path 2014-11-02 13:30:00 +01:00
tests Xtensa fixes for 2.2: 2014-11-10 20:50:37 +00:00
trace trace: [hmp] Reimplement "trace-event" and "info trace-events" using QMP 2014-09-26 09:34:38 +01:00
ui gtk: Don't crash if -nodefaults 2014-11-21 08:37:59 +01:00
util acl: fix memory leak 2014-11-17 11:48:56 +01:00
.exrc
.gitignore
.gitmodules
.mailmap
.travis.yml .travis.yml: remove "make check" from main matrix 2014-09-26 21:05:06 +04:00
accel.c accel: Create accel object when initializing machine 2014-10-09 15:36:14 +02:00
aio-posix.c
aio-win32.c aio-win32: avoid out-of-bounds access to the events array 2014-09-22 11:39:21 +01:00
arch_init.c migration: static variables will not be reset at second migration 2014-11-20 18:17:22 +05:30
async.c async: aio_context_new(): Handle event_notifier_init failure 2014-09-22 11:39:48 +01:00
balloon.c
block-migration.c block: Rename BlockDriverAIOCB* to BlockAIOCB* 2014-10-20 13:41:27 +02:00
block.c block: Fix max nb_sectors in bdrv_make_zero 2014-11-14 09:20:35 +00:00
blockdev-nbd.c
blockdev.c block: let commit blockjob run in BDS AioContext 2014-11-03 11:41:49 +00:00
blockjob.c block: declare blockjobs and dataplane friends! 2014-11-03 11:41:49 +00:00
bootdevice.c bootindex: change fprintf to error_report 2014-10-15 10:46:01 +02:00
bt-host.c
bt-vhci.c
Changelog
CODING_STYLE
configure seccomp: change configure to avoid arm 32 to break 2014-11-11 17:05:21 +01:00
COPYING
COPYING.LIB
coroutine-gthread.c
coroutine-sigaltstack.c coroutine-sigaltstack: Change jmp_buf to sigjmp_buf 2014-11-11 11:07:55 +03:00
coroutine-ucontext.c
coroutine-win32.c
cpu-exec.c cpu-exec: Do CPU_INTERRUPT_HALT unconditionally 2014-09-25 18:54:22 +01:00
cpus.c Introduce cpu_clean_all_dirty 2014-09-16 11:04:09 +02:00
cputlb.c
device_tree.c
device-hotplug.c blockdev: Eliminate drive_del() 2014-10-20 13:41:26 +02:00
disas.c
dma-helpers.c hw: Convert from BlockDriverState to BlockBackend, mostly 2014-10-20 14:02:25 +02:00
dump.c dump: Fix dump-guest-memory termination and use-after-close 2014-11-02 10:04:34 +03:00
exec.c exec: Handle multipage ranges in invalidate_and_set_dirty() 2014-11-18 10:19:12 +00:00
gdbstub.c gdbstub: Add a missing case of signal number translation in gdbstub 2014-11-11 08:58:30 +03:00
HACKING
hmp-commands.hx hmp: Remove "info pcmcia" 2014-10-24 12:19:11 +01:00
hmp.c Add HMP command "info memory-devices" 2014-09-26 13:37:06 -04:00
hmp.h Add HMP command "info memory-devices" 2014-09-26 13:37:06 -04:00
iohandler.c
ioport.c
iothread.c async: aio_context_new(): Handle event_notifier_init failure 2014-09-22 11:39:48 +01:00
kvm-all.c kvm: Fix memory slot page alignment logic 2014-11-20 14:52:01 +01:00
kvm-stub.c accel: Move KVM accel registration to kvm-all.c 2014-10-04 08:59:15 +02:00
LICENSE
main-loop.c Revert "main-loop.c: Handle SIGINT, SIGHUP and SIGTERM synchronously" 2014-10-27 15:05:09 +00:00
MAINTAINERS Add Migration maintainer 2014-11-11 09:46:46 +01:00
Makefile trace: install trace-events file 2014-09-26 09:34:39 +01:00
Makefile.objs qemu-file: Move stdio implementation to qemu-file-stdio.c 2014-10-14 10:29:28 +02:00
Makefile.target bootdevice: move bootdevice related code to new file bootdevice.c 2014-10-15 09:49:48 +02:00
memory_mapping.c Add skip_dump flag to ignore memory region during dump 2014-10-31 11:29:01 +01:00
memory.c Add skip_dump flag to ignore memory region during dump 2014-10-31 11:29:01 +01:00
migration-exec.c
migration-fd.c
migration-rdma.c rdma: Fix incorrect description in comments 2014-09-20 17:55:53 +04:00
migration-tcp.c qemu-sockets: Add error to non-blocking connect handler 2014-10-09 15:36:15 +02:00
migration-unix.c qemu-sockets: Add error to non-blocking connect handler 2014-10-09 15:36:15 +02:00
migration.c block/migration: Disable cache invalidate for incoming migration 2014-10-14 09:35:21 +02:00
module-common.c
monitor.c trivial patches for 2014-11-11 2014-11-11 14:50:10 +00:00
nbd.c block/migration: Disable cache invalidate for incoming migration 2014-10-14 09:35:21 +02:00
numa.c numa: make 'info numa' take into account hotplugged memory 2014-11-11 08:50:58 +03:00
os-posix.c os-posix: reorder parent notification for -daemonize 2014-11-02 10:04:34 +03:00
os-win32.c pidfile: stop making pidfile error a special case 2014-11-02 10:04:34 +03:00
page_cache.c
qapi-schema.json QMP/input-send-event: make console parameter optional 2014-11-13 11:06:40 +01:00
qdev-monitor.c qdev: Use qdev_get_device_class() for -device <type>,help 2014-11-04 17:50:00 +01:00
qdict-test-data.txt
qemu-bridge-helper.c
qemu-char.c qemu-char: fix MISSING_COMMA 2014-11-17 11:49:05 +01:00
qemu-coroutine-io.c
qemu-coroutine-lock.c
qemu-coroutine-sleep.c
qemu-coroutine.c
qemu-doc.texi qemu-doc.texi: fix typos in x509 examples 2014-11-05 09:53:18 +03:00
qemu-file-stdio.c qemu-file: Move stdio implementation to qemu-file-stdio.c 2014-10-14 10:29:28 +02:00
qemu-file-unix.c qemu-file: Move unix and socket implementations to qemu-file-unix.c 2014-10-14 10:29:28 +02:00
qemu-file.c qemu-file: Move stdio implementation to qemu-file-stdio.c 2014-10-14 10:29:28 +02:00
qemu-img-cmds.hx qemu-img: Add progress output for amend 2014-11-03 11:41:48 +00:00
qemu-img.c qemu-img: Omit error_report() after img_open() 2014-11-06 12:45:47 +01:00
qemu-img.texi qemu-img: Add progress output for amend 2014-11-03 11:41:48 +00:00
qemu-io-cmds.c qemu-io: Respect early image end for map 2014-10-23 15:34:02 +02:00
qemu-io.c block: Make BlockBackend own its BlockDriverState 2014-10-20 13:41:26 +02:00
qemu-log.c
qemu-nbd.c block: Make BlockBackend own its BlockDriverState 2014-10-20 13:41:26 +02:00
qemu-nbd.texi
qemu-options-wrapper.h
qemu-options.h
qemu-options.hx -machine vmport=off: Allow disabling of VMWare ioport emulation 2014-11-02 13:44:12 +02:00
qemu-seccomp.c seccomp: whitelist syscalls fallocate(), fadvise64(), inotify_init1() and inotify_add_watch() 2014-11-11 17:01:35 +01:00
qemu-tech.texi
qemu-timer.c
qemu.nsi
qemu.sasl
qmp-commands.hx QMP/input-send-event: make console parameter optional 2014-11-13 11:06:40 +01:00
qmp.c qmp: Print descriptions of object properties 2014-10-15 05:03:15 +02:00
qtest.c qtest: fix qtest log fd should be initialized before qtest chardev 2014-10-23 16:41:27 +02:00
README
rules.mak rules.mak: Allow .mo-objs and .mo-cflags in -y variables 2014-10-31 11:26:25 +01:00
savevm.c snapshot: Reset err to NULL to avoid double free 2014-11-03 09:48:41 +00:00
softmmu_template.h softmmu: provide softmmu access type enum 2014-11-03 11:48:34 +00:00
spice-qemu-char.c qemu-char: Rename register_char_driver_qapi() to register_char_driver() 2014-09-16 23:36:32 +01:00
tcg-runtime.c
tci.c
thread-pool.c block: Rename BlockDriverCompletionFunc to BlockCompletionFunc 2014-10-20 13:41:27 +02:00
thunk.c
tpm.c
trace-events megasas: Fixup MSI-X handling 2014-10-31 11:29:01 +01:00
translate-all.c translate-all.c: memory walker initial address miscalculation 2014-10-06 21:53:35 +03:00
translate-all.h
user-exec.c
VERSION Update version for v2.2.0-rc2 release 2014-11-18 18:00:58 +00:00
version.rc
vl.c sysbus: Make devices spawnable via -device 2014-11-04 23:26:14 +01:00
vmstate.c vmstate: Allow dynamic allocation for VBUFFER during migration 2014-10-14 09:35:48 +02:00
xbzrle.c
xen-common-stub.c accel: Move Xen registration code to xen-common.c 2014-10-04 08:59:15 +02:00
xen-common.c accel: Pass MachineState object to accel init functions 2014-10-09 12:57:10 +02:00
xen-hvm-stub.c
xen-hvm.c xen-hvm: Remove redundant variable 'xstate' 2014-11-11 17:34:53 +03:00
xen-mapcache.c

README 

Read the documentation in qemu-doc.html or on http://wiki.qemu-project.org

- QEMU team