a8170e5e97
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are reserved) and its purpose doesn't match the name (most target_phys_addr_t addresses are not target specific). Replace it with a finger-friendly, standards conformant hwaddr. Outstanding patchsets can be fixed up with the command git rebase -i --exec 'find -name "*.[ch]" | xargs s/target_phys_addr_t/hwaddr/g' origin Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
303 lines
8.1 KiB
C
303 lines
8.1 KiB
C
/*
|
|
* Motorola ColdFire MCF5208 SoC emulation.
|
|
*
|
|
* Copyright (c) 2007 CodeSourcery.
|
|
*
|
|
* This code is licensed under the GPL
|
|
*/
|
|
#include "hw.h"
|
|
#include "mcf.h"
|
|
#include "qemu-timer.h"
|
|
#include "ptimer.h"
|
|
#include "sysemu.h"
|
|
#include "net.h"
|
|
#include "boards.h"
|
|
#include "loader.h"
|
|
#include "elf.h"
|
|
#include "exec-memory.h"
|
|
|
|
#define SYS_FREQ 66000000
|
|
|
|
#define PCSR_EN 0x0001
|
|
#define PCSR_RLD 0x0002
|
|
#define PCSR_PIF 0x0004
|
|
#define PCSR_PIE 0x0008
|
|
#define PCSR_OVW 0x0010
|
|
#define PCSR_DBG 0x0020
|
|
#define PCSR_DOZE 0x0040
|
|
#define PCSR_PRE_SHIFT 8
|
|
#define PCSR_PRE_MASK 0x0f00
|
|
|
|
typedef struct {
|
|
MemoryRegion iomem;
|
|
qemu_irq irq;
|
|
ptimer_state *timer;
|
|
uint16_t pcsr;
|
|
uint16_t pmr;
|
|
uint16_t pcntr;
|
|
} m5208_timer_state;
|
|
|
|
static void m5208_timer_update(m5208_timer_state *s)
|
|
{
|
|
if ((s->pcsr & (PCSR_PIE | PCSR_PIF)) == (PCSR_PIE | PCSR_PIF))
|
|
qemu_irq_raise(s->irq);
|
|
else
|
|
qemu_irq_lower(s->irq);
|
|
}
|
|
|
|
static void m5208_timer_write(void *opaque, hwaddr offset,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
m5208_timer_state *s = (m5208_timer_state *)opaque;
|
|
int prescale;
|
|
int limit;
|
|
switch (offset) {
|
|
case 0:
|
|
/* The PIF bit is set-to-clear. */
|
|
if (value & PCSR_PIF) {
|
|
s->pcsr &= ~PCSR_PIF;
|
|
value &= ~PCSR_PIF;
|
|
}
|
|
/* Avoid frobbing the timer if we're just twiddling IRQ bits. */
|
|
if (((s->pcsr ^ value) & ~PCSR_PIE) == 0) {
|
|
s->pcsr = value;
|
|
m5208_timer_update(s);
|
|
return;
|
|
}
|
|
|
|
if (s->pcsr & PCSR_EN)
|
|
ptimer_stop(s->timer);
|
|
|
|
s->pcsr = value;
|
|
|
|
prescale = 1 << ((s->pcsr & PCSR_PRE_MASK) >> PCSR_PRE_SHIFT);
|
|
ptimer_set_freq(s->timer, (SYS_FREQ / 2) / prescale);
|
|
if (s->pcsr & PCSR_RLD)
|
|
limit = s->pmr;
|
|
else
|
|
limit = 0xffff;
|
|
ptimer_set_limit(s->timer, limit, 0);
|
|
|
|
if (s->pcsr & PCSR_EN)
|
|
ptimer_run(s->timer, 0);
|
|
break;
|
|
case 2:
|
|
s->pmr = value;
|
|
s->pcsr &= ~PCSR_PIF;
|
|
if ((s->pcsr & PCSR_RLD) == 0) {
|
|
if (s->pcsr & PCSR_OVW)
|
|
ptimer_set_count(s->timer, value);
|
|
} else {
|
|
ptimer_set_limit(s->timer, value, s->pcsr & PCSR_OVW);
|
|
}
|
|
break;
|
|
case 4:
|
|
break;
|
|
default:
|
|
hw_error("m5208_timer_write: Bad offset 0x%x\n", (int)offset);
|
|
break;
|
|
}
|
|
m5208_timer_update(s);
|
|
}
|
|
|
|
static void m5208_timer_trigger(void *opaque)
|
|
{
|
|
m5208_timer_state *s = (m5208_timer_state *)opaque;
|
|
s->pcsr |= PCSR_PIF;
|
|
m5208_timer_update(s);
|
|
}
|
|
|
|
static uint64_t m5208_timer_read(void *opaque, hwaddr addr,
|
|
unsigned size)
|
|
{
|
|
m5208_timer_state *s = (m5208_timer_state *)opaque;
|
|
switch (addr) {
|
|
case 0:
|
|
return s->pcsr;
|
|
case 2:
|
|
return s->pmr;
|
|
case 4:
|
|
return ptimer_get_count(s->timer);
|
|
default:
|
|
hw_error("m5208_timer_read: Bad offset 0x%x\n", (int)addr);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static const MemoryRegionOps m5208_timer_ops = {
|
|
.read = m5208_timer_read,
|
|
.write = m5208_timer_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static uint64_t m5208_sys_read(void *opaque, hwaddr addr,
|
|
unsigned size)
|
|
{
|
|
switch (addr) {
|
|
case 0x110: /* SDCS0 */
|
|
{
|
|
int n;
|
|
for (n = 0; n < 32; n++) {
|
|
if (ram_size < (2u << n))
|
|
break;
|
|
}
|
|
return (n - 1) | 0x40000000;
|
|
}
|
|
case 0x114: /* SDCS1 */
|
|
return 0;
|
|
|
|
default:
|
|
hw_error("m5208_sys_read: Bad offset 0x%x\n", (int)addr);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static void m5208_sys_write(void *opaque, hwaddr addr,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
hw_error("m5208_sys_write: Bad offset 0x%x\n", (int)addr);
|
|
}
|
|
|
|
static const MemoryRegionOps m5208_sys_ops = {
|
|
.read = m5208_sys_read,
|
|
.write = m5208_sys_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static void mcf5208_sys_init(MemoryRegion *address_space, qemu_irq *pic)
|
|
{
|
|
MemoryRegion *iomem = g_new(MemoryRegion, 1);
|
|
m5208_timer_state *s;
|
|
QEMUBH *bh;
|
|
int i;
|
|
|
|
/* SDRAMC. */
|
|
memory_region_init_io(iomem, &m5208_sys_ops, NULL, "m5208-sys", 0x00004000);
|
|
memory_region_add_subregion(address_space, 0xfc0a8000, iomem);
|
|
/* Timers. */
|
|
for (i = 0; i < 2; i++) {
|
|
s = (m5208_timer_state *)g_malloc0(sizeof(m5208_timer_state));
|
|
bh = qemu_bh_new(m5208_timer_trigger, s);
|
|
s->timer = ptimer_init(bh);
|
|
memory_region_init_io(&s->iomem, &m5208_timer_ops, s,
|
|
"m5208-timer", 0x00004000);
|
|
memory_region_add_subregion(address_space, 0xfc080000 + 0x4000 * i,
|
|
&s->iomem);
|
|
s->irq = pic[4 + i];
|
|
}
|
|
}
|
|
|
|
static void mcf5208evb_init(QEMUMachineInitArgs *args)
|
|
{
|
|
ram_addr_t ram_size = args->ram_size;
|
|
const char *cpu_model = args->cpu_model;
|
|
const char *kernel_filename = args->kernel_filename;
|
|
CPUM68KState *env;
|
|
int kernel_size;
|
|
uint64_t elf_entry;
|
|
hwaddr entry;
|
|
qemu_irq *pic;
|
|
MemoryRegion *address_space_mem = get_system_memory();
|
|
MemoryRegion *ram = g_new(MemoryRegion, 1);
|
|
MemoryRegion *sram = g_new(MemoryRegion, 1);
|
|
|
|
if (!cpu_model)
|
|
cpu_model = "m5208";
|
|
env = cpu_init(cpu_model);
|
|
if (!env) {
|
|
fprintf(stderr, "Unable to find m68k CPU definition\n");
|
|
exit(1);
|
|
}
|
|
|
|
/* Initialize CPU registers. */
|
|
env->vbr = 0;
|
|
/* TODO: Configure BARs. */
|
|
|
|
/* DRAM at 0x40000000 */
|
|
memory_region_init_ram(ram, "mcf5208.ram", ram_size);
|
|
vmstate_register_ram_global(ram);
|
|
memory_region_add_subregion(address_space_mem, 0x40000000, ram);
|
|
|
|
/* Internal SRAM. */
|
|
memory_region_init_ram(sram, "mcf5208.sram", 16384);
|
|
vmstate_register_ram_global(sram);
|
|
memory_region_add_subregion(address_space_mem, 0x80000000, sram);
|
|
|
|
/* Internal peripherals. */
|
|
pic = mcf_intc_init(address_space_mem, 0xfc048000, env);
|
|
|
|
mcf_uart_mm_init(address_space_mem, 0xfc060000, pic[26], serial_hds[0]);
|
|
mcf_uart_mm_init(address_space_mem, 0xfc064000, pic[27], serial_hds[1]);
|
|
mcf_uart_mm_init(address_space_mem, 0xfc068000, pic[28], serial_hds[2]);
|
|
|
|
mcf5208_sys_init(address_space_mem, pic);
|
|
|
|
if (nb_nics > 1) {
|
|
fprintf(stderr, "Too many NICs\n");
|
|
exit(1);
|
|
}
|
|
if (nd_table[0].used)
|
|
mcf_fec_init(address_space_mem, &nd_table[0],
|
|
0xfc030000, pic + 36);
|
|
|
|
/* 0xfc000000 SCM. */
|
|
/* 0xfc004000 XBS. */
|
|
/* 0xfc008000 FlexBus CS. */
|
|
/* 0xfc030000 FEC. */
|
|
/* 0xfc040000 SCM + Power management. */
|
|
/* 0xfc044000 eDMA. */
|
|
/* 0xfc048000 INTC. */
|
|
/* 0xfc058000 I2C. */
|
|
/* 0xfc05c000 QSPI. */
|
|
/* 0xfc060000 UART0. */
|
|
/* 0xfc064000 UART0. */
|
|
/* 0xfc068000 UART0. */
|
|
/* 0xfc070000 DMA timers. */
|
|
/* 0xfc080000 PIT0. */
|
|
/* 0xfc084000 PIT1. */
|
|
/* 0xfc088000 EPORT. */
|
|
/* 0xfc08c000 Watchdog. */
|
|
/* 0xfc090000 clock module. */
|
|
/* 0xfc0a0000 CCM + reset. */
|
|
/* 0xfc0a4000 GPIO. */
|
|
/* 0xfc0a8000 SDRAM controller. */
|
|
|
|
/* Load kernel. */
|
|
if (!kernel_filename) {
|
|
fprintf(stderr, "Kernel image must be specified\n");
|
|
exit(1);
|
|
}
|
|
|
|
kernel_size = load_elf(kernel_filename, NULL, NULL, &elf_entry,
|
|
NULL, NULL, 1, ELF_MACHINE, 0);
|
|
entry = elf_entry;
|
|
if (kernel_size < 0) {
|
|
kernel_size = load_uimage(kernel_filename, &entry, NULL, NULL);
|
|
}
|
|
if (kernel_size < 0) {
|
|
kernel_size = load_image_targphys(kernel_filename, 0x40000000,
|
|
ram_size);
|
|
entry = 0x40000000;
|
|
}
|
|
if (kernel_size < 0) {
|
|
fprintf(stderr, "qemu: could not load kernel '%s'\n", kernel_filename);
|
|
exit(1);
|
|
}
|
|
|
|
env->pc = entry;
|
|
}
|
|
|
|
static QEMUMachine mcf5208evb_machine = {
|
|
.name = "mcf5208evb",
|
|
.desc = "MCF5206EVB",
|
|
.init = mcf5208evb_init,
|
|
.is_default = 1,
|
|
};
|
|
|
|
static void mcf5208evb_machine_init(void)
|
|
{
|
|
qemu_register_machine(&mcf5208evb_machine);
|
|
}
|
|
|
|
machine_init(mcf5208evb_machine_init);
|