Jan Kiszka 83d0cf895f integrator/cp: Implement CARDIN and WPROT signals ...

This allows to use the SD card emulation of the board: Forward the
signals from the pl181 top the CP control register emulation, report the
current state via CP_INTREG, deliver CARDIN IRQ to the secondary
interrupt controller and also support clearing that line via CP_INTREG.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-id: c55d9fb28d19ec83625cb0074b3b6f2e5958caf6.1426004843.git.jan.kiszka@siemens.com
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

2015-03-11 13:21:06 +00:00

..

allwinner-a10.c

…

armv7m.c

target_arm: Parameterise the irq lines for armv7m_init

2015-02-05 13:37:21 +00:00

boot.c

target-arm: Change reset to highest available EL

2015-02-05 13:37:22 +00:00

collie.c

hw: Convert from BlockDriverState to BlockBackend, mostly

2014-10-20 14:02:25 +02:00

cubieboard.c

…

digic_boards.c

arm/digic_boards: Remove superfluous '\n' around error_report()

2015-03-10 08:15:33 +03:00

digic.c

…

exynos4_boards.c

…

exynos4210.c

error: Use error_report_err() where appropriate

2015-02-18 10:51:09 +01:00

gumstix.c

hw: Convert from BlockDriverState to BlockBackend, mostly

2014-10-20 14:02:25 +02:00

highbank.c

error: Use error_report_err() where appropriate

2015-02-18 10:51:09 +01:00

integratorcp.c

integrator/cp: Implement CARDIN and WPROT signals

2015-03-11 13:21:06 +00:00

kzm.c

…

mainstone.c

hw: Convert from BlockDriverState to BlockBackend, mostly

2014-10-20 14:02:25 +02:00

Makefile.objs

netduino2: Add the Netduino 2 Machine

2015-03-11 13:21:06 +00:00

musicpal.c

hw: Convert from BlockDriverState to BlockBackend, mostly

2014-10-20 14:02:25 +02:00

netduino2.c

netduino2: Add the Netduino 2 Machine

2015-03-11 13:21:06 +00:00

nseries.c

hw/usb: simplified usb_enabled

2015-01-08 17:32:27 +00:00

omap1.c

hw: Convert from BlockDriverState to BlockBackend, mostly

2014-10-20 14:02:25 +02:00

omap2.c

hw: Convert from BlockDriverState to BlockBackend, mostly

2014-10-20 14:02:25 +02:00

omap_sx1.c

hw: Convert from BlockDriverState to BlockBackend, mostly

2014-10-20 14:02:25 +02:00

palm.c

…

pxa2xx_gpio.c

…

pxa2xx_pic.c

…

pxa2xx.c

hw/usb: simplified usb_enabled

2015-01-08 17:32:27 +00:00

realview.c

error: Use error_report_err() where appropriate

2015-02-18 10:51:09 +01:00

spitz.c

hw: Convert from BlockDriverState to BlockBackend, mostly

2014-10-20 14:02:25 +02:00

stellaris.c

target_arm: Parameterise the irq lines for armv7m_init

2015-02-05 13:37:21 +00:00

stm32f205_soc.c

stm32f205: Add the stm32f205 SoC

2015-03-11 13:21:06 +00:00

strongarm.c

…

strongarm.h

…

tosa.c

hw: Convert from BlockDriverState to BlockBackend, mostly

2014-10-20 14:02:25 +02:00

versatilepb.c

error: Use error_report_err() where appropriate

2015-02-18 10:51:09 +01:00

vexpress.c

hw: Propagate errors through qdev_prop_set_drive()

2015-03-10 11:18:23 +01:00

virt.c

hw/arm/virt: fix cmdline parsing bug with CPU options and smp > 1

2015-03-11 13:21:05 +00:00

xilinx_zynq.c

error: Use error_report_err() where appropriate

2015-02-18 10:51:09 +01:00

z2.c

hw: Convert from BlockDriverState to BlockBackend, mostly

2014-10-20 14:02:25 +02:00