rustbuild: Fail the build if we build Cargo twice
This commit updates the `ToolBuild` step to stream Cargo's JSON messages, parse
them, and record all libraries built. If we build anything twice (aka Cargo)
it'll most likely happen due to dependencies being recompiled which is caught by
this check.
This commit updates the `ToolBuild` step to stream Cargo's JSON messages, parse
them, and record all libraries built. If we build anything twice (aka Cargo)
it'll most likely happen due to dependencies being recompiled which is caught by
this check.
Fix confusing doc for `scan`
The comment "the value passed on to the next iteration" confused me since it sounded more like what Haskell's [scanl](http://hackage.haskell.org/package/base-4.11.0.0/docs/Prelude.html#v:scanl) does where the closure's return value serves as both the "yielded value" *and* the new value of the "state".
I tried changing the example to make it clear that the closure's return value is decoupled from the state argument.
rustbuild: Disable docs on cross-compiled builds
This commit disables building documentation on cross-compiled compilers, for
example ARM/MIPS/PowerPC/etc. Currently I believe we're not getting much use out
of these documentation artifacts and they often take 10-15 minutes total to
build as it requires building rustdoc/rustbook and then also generating all the
documentation, especially for the reference and the book itself.
In an effort to cut down on the amount of work that we're doing on dist CI
builders in light of recent timeouts this was some relatively low hanging fruit
to cut which in theory won't have much impact on the ecosystem in the hopes that
the documentation isn't used too heavily anyway.
While initial analysis in #48827 showed only shaving 5 minutes off local builds
the same 5 minute conclusion was drawn from #48826 which ended up having nearly
a half-hour impact on the bots. In that sense I'm hoping that we can land this
and test out what happens on CI to see how it affects timing.
Note that all tier 1 platforms, Windows, Mac, and Linux, will continue to
generate documentation.
Use an uninitialized buffer in GenericRadix::fmt_int, like in Display::fmt for numeric types
The code using a slice of that buffer is only ever going to use
bytes that are subsequently initialized.
Document when types have OS-dependent sizes
As per issue #43601, types that can change size depending on the
target operating system should say so in their documentation.
I used this template when adding doc comments:
```
The size of a(n) <name> struct may vary depending on the target
operating system, and may change between Rust releases.
```
For enums, I used "instance" instead of "struct".
I added documentation to these types:
```
- std::time::Instant (contains sys::time::Instant)
- std::time::SystemTime (contains sys::time::SystemTime)
- std::io::StdinRaw (contains sys::stdio::Stdin)
- std::io::StdoutRaw (contains sys::stdio::Stdout)
- std::io::Stderr (contains sys::stdio::Stderr)
- std::net::addr::SocketAddrV4 (contains sys::net::netc::sockaddr_in)
- std::net::addr::SocketAddrV6 (contains sys::net::netc::sockaddr_in6)
- std::net::addr::SocketAddr (contains std::net::addr::SocketAddrV4 and SocketAddrV6)
- std::net::ip::Ipv4Addr (contains sys::net::netc::in_addr)
- std::net::ip::Ipv6Addr (contains sys::net::netc::in6_addr)
- std::net::ip::IpAddr (contains std::net::ip::Ipv4Addr and Ipv6Addr)
```
I also found that these types varied in size; however, I don't think they need documentation, as it's already fairly obvious that they change based on different OS's:
```
- std::fs::DirBuilder (contains sys::fs::DirBuilder)
- std::fs::FileType (contains sys::fs::FileType)
- std::fs::Permissions (contains sys::fs::FilePermissions)
- std::fs::OpenOptions (contains sys::fs::OpenOptions)
- std::fs::DirEntry (contains sys::fs::DirEntry)
- std::fs::ReadDir (contains sys::fs::ReadDir)
- std::fs::Metadata (contains sys::fs::FileAttr)
- std::fs::File (contains sys::fs::File)
- std::process::Child (contains sys::process::Process)
- std::process::ChildStdin (contains sys::process::AnonPipe)
- std::process::ChildStdout (contains sys::process::AnonPipe)
- std::process::ChildStderr (contains sys::process::AnonPipe)
- std::process::Command (contains sys::process::Command)
- std::process::Stdio (contains sys::process::Stdio)
- std::process::ExitStatus (contains sys::process::ExitStatus)
- std::process::Output (contains std::process::ExitStatus)
- std::sys_common::condvar::Condvar (contains sys::condvar::Condvar)
- std::sys_common::mutex::Mutex (contains sys::mutex::Mutex)
- std::sys_common::net::LookupHost (contains sys::net::netc::addrinfo)
- std::sys_common::net::TcpStream (contains sys::net::Socket)
- std::sys_common::net::TcpListener (contains sys::net::Socket)
- std::sys_common::net::UdpSocket (contains sys::net::Socket)
- std::sys_common::remutex::ReentrantMutex (contains sys::mutex::ReentrantMutex)
- std::sys_common::rwlock::RWLock (contains sys::rwlock::RWLock)
- std::sys_common::thread_local::Key (contains sys::thread_local::Key)
```
Maybe we should just put a comment about the size of structs in the module-level docs for `fs`, `process`, and `sys_common`?
If anyone can think of other types that can change size, comment below. I'm also open to changing the wording.
closes#43601.
Some comments and documentation for name resolution crate
Hello
I'm trying to get a grasp of how the name resolution crate works, as part of helping with https://github.com/rust-lang-nursery/rustc-guide/issues/16. Not that I'd be succeeding much, but as I was reading the code, I started to put some notes into it, to help me understand.
I guess I didn't get very far yet, but I'd like to share what I have, in case it might be useful for someone else. I hope these are correct (even if incomplete), but I'll be glad for a fast check in case I put something misleading there.
Add basic PGO support.
This PR adds two mutually exclusive options for profile usage and generation using LLVM's instruction profile generation (the same as clang uses), `-C pgo-use` and `-C pgo-gen`.
See each commit for details.
This commit disables building documentation on cross-compiled compilers, for
example ARM/MIPS/PowerPC/etc. Currently I believe we're not getting much use out
of these documentation artifacts and they often take 10-15 minutes total to
build as it requires building rustdoc/rustbook and then also generating all the
documentation, especially for the reference and the book itself.
In an effort to cut down on the amount of work that we're doing on dist CI
builders in light of recent timeouts this was some relatively low hanging fruit
to cut which in theory won't have much impact on the ecosystem in the hopes that
the documentation isn't used too heavily anyway.
While initial analysis in #48827 showed only shaving 5 minutes off local builds
the same 5 minute conclusion was drawn from #48826 which ended up having nearly
a half-hour impact on the bots. In that sense I'm hoping that we can land this
and test out what happens on CI to see how it affects timing.
Note that all tier 1 platforms, Windows, Mac, and Linux, will continue to
generate documentation.
appveyor: Move run-pass-fulldeps to extra builders
We've made headway towards splitting the test suite across two appveyor builders
and this moves one more tests suite between builders. The last [failed
build][fail] had its longest running test suite and I've moved that to the
secondary builder.
cc #48844
[fail]: https://ci.appveyor.com/project/rust-lang/rust/build/1.0.6782
Introduce unsafe offset_from on pointers
Adds intrinsics::exact_div to take advantage of the unsafe, which reduces the implementation from
```asm
sub rcx, rdx
mov rax, rcx
sar rax, 63
shr rax, 62
lea rax, [rax + rcx]
sar rax, 2
ret
```
down to
```asm
sub rcx, rdx
sar rcx, 2
mov rax, rcx
ret
```
(for `*const i32`)
See discussion on the `offset_to` tracking issue https://github.com/rust-lang/rust/issues/41079
Some open questions
- Would you rather I split the intrinsic PR from the library PR?
- Do we even want the safe version of the API? https://github.com/rust-lang/rust/issues/41079#issuecomment-374426786 I've added some text to its documentation that even if it's not UB, it's useless to use it between pointers into different objects.
and todos
- [x] ~~I need to make a codegen test~~ Done
- [x] ~~Can the subtraction use nsw/nuw?~~ No, it can't https://github.com/rust-lang/rust/pull/49297#discussion_r176697574
- [x] ~~Should there be `usize` variants of this, like there are now `add` and `sub` that you almost always want over `offset`? For example, I imagine `sub_ptr` that returns `usize` and where it's UB if the distance is negative.~~ Can wait for later; C gives a signed result https://github.com/rust-lang/rust/issues/41079#issuecomment-375842235, so we might as well, and this existing to go with `offset` makes sense.
Pass --strip-debug to GccLinker when building without debuginfo
C.f. #46034
---
This brings a hello-world built by passing rustc no command line options from 2.9M to 592K on Linux.
(This might need to special case MacOS or Windows, not sure if the linkers there support `--strip-debug`, and there is an annoying lack of dependable docs for the linkers there.)
The comment "the value passed on to the next iteration" confused me since it sounded more like what Haskell's [scanl](http://hackage.haskell.org/package/base-4.11.0.0/docs/Prelude.html#v:scanl) does where the closure's return value serves as both the "yielded value" *and* the new value of the "state".
I tried changing the example to make it clear that the closure's return value is decoupled from the state argument.
Reduce scope of unsafe block in sun_path_offset
I reduced the scope of the unsafe block to the `uninitialized` call which is the only actual unsafe bit.
ci: Don't use Travis caches for docker images
This commit moves away from caching on Travis to our own caching on S3 for
caching docker layers between builds. Unfortunately the Travis caches have over
time had a few critical pain points:
* Caches are only updated for successful builds, meaning that if a build times
out or fails in a different location the sucessfully-created docker images
isn't always cached. While this makes sense as a general rule of caches it
hurts our use cases.
* Caches are per-branch and builder which means that we don't have a separate
cache on each release channel. All our merges go through the `auto` branch
which means that they're all sharing the same cache, even those for merging to
master/beta. This means that PRs which switch between master/beta will keep
rebuilting and having cache misses.
* Caches have historically been invaliated somewhat regularly a little more
aggressively than we'd want (I think).
* We don't always need to update the contents of the cache if the Docker image
didn't change at all, and saving off the docker layers can sometimes be quite
expensive.
For all these reasons this commit drops the usage of Travis's built-in caching
support. Instead our own caching is used by storing blobs to S3. Normally this
would be a very risky endeavour but we're basically priming a cache for a cache
(docker) so if we get this wrong the failure mode is longer builds, not stale
caches. We'll notice that pretty quickly and hopefully fix it!
The logic here is inserted directly into the `src/ci/docker/run.sh` script to
download an image based on a shasum of the `Dockerfile` and other assorted files.
This blob, if found, is loaded into docker and we record what layers were
inserted. After docker finishes the build (hopefully quickly with lots of cache
hits) we then see the sha of the final image. If it's one of the layers we
loaded then there's no need to update the cache. Otherwise we upload our layers
to the global cache, possibly overwriting what we previously just downloaded.
This is hopefully a step towards mitigating #49278 although it doesn't
completely fix it as it means we'll still probably have to retry builds that
bust the cache.
