Don't show HTML diff if tidy isn't installed for rustdoc tests
The output without the `tidy` tool is just way too big to be of any use. It makes reading the error much more complicated.
r? ``@jyn514``
Allow registering tool lints with `register_tool`
Previously, there was no way to add a custom tool prefix, even if the tool
itself had registered a lint:
```rust
#![feature(register_tool)]
#![register_tool(xyz)]
#![warn(xyz::my_lint)]
```
```
$ rustc unknown-lint.rs --crate-type lib
error[E0710]: an unknown tool name found in scoped lint: `xyz::my_lint`
--> unknown-lint.rs:3:9
|
3 | #![warn(xyz::my_lint)]
| ^^^
```
This allows opting-in to lints from other tools using `register_tool`.
cc https://github.com/rust-lang/rust/issues/66079#issuecomment-788589193, ``@chorman0773``
r? ``@petrochenkov``
ci/docker: Add SDK/NDK level 21 to android docker for 32bit platforms
Certain features of Linux (getauxval() and epoll_create1()) are only
available in android SDK/NDK levels 18 and 21 respectively. The 32bit
platform is currently on level 14 for compatibility with Android 4.0.
This patch adds SDK/NDK level 21 to the docker for 32 bit platforms,
while leaving the default setup at level 14.
With this done, projects such as `rustup` which rely on these dockers
can build with modern ecosystem crates such as tokio 1.0, by using
the level 21 toolchain, but those which do not need to switch will
be unaffected, since the level 14 toolchain remains available.
Extend `proc_macro_back_compat` lint to `procedural-masquerade`
We now lint on *any* use of `procedural-masquerade` crate. While this
crate still exists, its main reverse dependency (`cssparser`) no longer
depends on it. Any crates still depending off should stop doing so, as
it only exists to support very old Rust versions.
If a crate actually needs to support old versions of rustc via
`procedural-masquerade`, then they'll just need to accept the warning
until we remove it entirely (at the same time as the back-compat hack).
The latest version of `procedural-masquerade` does work with the
latest rustc, but trying to check for the version seems like more
trouble than it's worth.
While working on this, I realized that the `proc-macro-hack` check was
never actually doing anything. The corresponding enum variant in
`proc-macro-hack` is named `Value` or `Nested` - it has never been
called `Input`. Due to a strange Crater issue, the Crater run that
tested adding this did *not* end up testing it - some of the crates that
would have failed did not actually have their tests checked, making it
seem as though the `proc-macro-hack` check was working.
The Crater issue is being discussed at
https://rust-lang.zulipchat.com/#narrow/stream/242791-t-infra/topic/Nearly.20identical.20Crater.20runs.20processed.20a.20crate.20differently/near/230406661
Despite the `proc-macro-hack` check not actually doing anything, we
haven't gotten any reports from users about their build being broken.
I went ahead and removed it entirely, since it's clear that no one is
being affected by the `proc-macro-hack` regression in practice.
Make source-based code coverage compatible with MIR inlining
When codegenning code coverage use the instance that coverage data was
originally generated for, to ensure basic level of compatibility with
MIR inlining.
Fixes#83061
Add more links between hash and btree collections
- Link from `core::hash` to `HashMap` and `HashSet`
- Link from HashMap and HashSet to the module-level documentation on
when to use the collection
- Link from several collections to Wikipedia articles on the general
concept
See also https://github.com/rust-lang/rust/pull/81989#issuecomment-783920840.
Emit error when trying to use assembler syntax directives in `asm!`
The `.intel_syntax` and `.att_syntax` assembler directives should not be used, in favor of not specifying a syntax for intel, and in favor of the explicit `att_syntax` option using the inline assembly options.
Closes#79869
Vec::dedup_by optimization
Now `Vec::dedup_by` drops items in-place as it goes through them.
From my benchmarks, it is around 10% faster when T is small, with no major regression when otherwise.
I used `ptr::copy` instead of conditional `ptr::copy_nonoverlapping`, because the latter had some weird performance issues on my ryzen laptop (it was 50% slower on it than on intel/sandybridge laptop)
It would be good if someone was able to reproduce these results.
Deprecate `intrinsics::drop_in_place` and `collections::Bound`, which accidentally weren't deprecated
Fixes#82080.
I've taken the liberty of updating the `since` values to 1.52, since an unobservable deprecation isn't much of a deprecation (even the detailed release notes never bothered to mention these deprecations).
As mentioned in the issue I'm *pretty* sure that using a type alias for `Bound` is semantically equivalent to the re-export; [the reference implies](https://doc.rust-lang.org/reference/items/type-aliases.html) that type aliases only observably differ from types when used on unit structs or tuple structs, whereas `Bound` is an enum.
ast/hir: Rename field-related structures
I always forget what `ast::Field` and `ast::StructField` mean despite working with AST for long time, so this PR changes the naming to less confusing and more consistent.
- `StructField` -> `FieldDef` ("field definition")
- `Field` -> `ExprField` ("expression field", not "field expression")
- `FieldPat` -> `PatField` ("pattern field", not "field pattern")
Various visiting and other methods working with the fields are renamed correspondingly too.
The second commit reduces the size of `ExprKind` by boxing fields of `ExprKind::Struct` in preparation for https://github.com/rust-lang/rust/pull/80080.
Add a check for ASCII characters in to_upper and to_lower
This extra check has better performance. See discussion here:
https://internals.rust-lang.org/t/to-upper-speed/13896
Thanks to `@gilescope` for helping discover and test this.
Update books
## nomicon
1 commits in adca786547d08fe676b2fc7a6f08c2ed5280ca38..6fe476943afd53a9a6e91f38a6ea7bb48811d8ff
2021-02-16 16:34:20 +0900 to 2021-03-10 07:28:57 +0900
- Merge pull request rust-lang-nursery/nomicon#257 from skade/opaque-types-fix
## reference
3 commits in 3b6fe80c205d2a2b5dc8a276192bbce9eeb9e9cf..e32a2f928f8b78d534bca2b9e7736413314dc556
2021-02-22 22:09:17 -0800 to 2021-03-08 23:24:30 -0800
- Clarify that ::foo paths are not necessarily based off of the "crate root" (rust-lang-nursery/reference#974)
- Comment typo (rust-lang-nursery/reference#977)
- Fix misspelled word discrimnant (rust-lang-nursery/reference#976)
## book
2 commits in 0f87daf683ae3de3cb725faecb11b7e7e89f0e5a..fc2f690fc16592abbead2360cfc0a42f5df78052
2021-03-01 08:54:04 -0500 to 2021-03-05 14:03:22 -0500
- Fix wrapping
- fix: redundant double introduction of shadowing (rust-lang/book#2633)
## rust-by-example
1 commits in 3e0d98790c9126517fa1c604dc3678f396e92a27..eead22c6c030fa4f3a167d1798658c341199e2ae
2021-02-25 08:23:10 -0300 to 2021-03-04 16:26:43 -0300
- Fix grammar "terminates" -> "terminate" (rust-lang/rust-by-example#1423)
## rustc-dev-guide
15 commits in c431f8c29a41413dddcb3bfa0d71c9cabe366317..67ebd4b55dba44edfc351621cef6e5e758169c55
2021-02-28 16:35:20 -0500 to 2021-03-11 13:36:25 -0800
- Remove extra the (rust-lang/rustc-dev-guide#1088)
- Fix double-word typos (rust-lang/rustc-dev-guide#1084)
- I-nominated are nominated for discussion (rust-lang/rustc-dev-guide#1080)
- Complete unfinished statement
- Check `BASE_SHA` only if it's a PR (rust-lang/rustc-dev-guide#1083)
- Update lins
- Apply suggestions from code review
- Add stub about the THIR
- Switch from Travis to GHA (rust-lang/rustc-dev-guide#1073)
- Adjust a bit better P- label text
- Fix typos (rust-lang/rustc-dev-guide#1079)
- Update cmake version in prerequisites.md (rust-lang/rustc-dev-guide#1077)
- Fix typo: suceed -> succeed
- Add article on using WPA to profile rustc memory usage on Windows (rust-lang/rustc-dev-guide#1074)
- Use more accurate estimate of generated LLVM IR with llvm-lines
## embedded-book
1 commits in a96d096cffe5fa2c84af1b4b61e1492f839bb2e1..f61685755fad7d3b88b4645adfbf461d500563a2
2021-02-17 08:08:52 +0000 to 2021-03-08 01:06:44 +0000
- Swap to GHA (rust-embedded/book#285)
Don't warn about old rustdoc lint names (temporarily)
Since https://github.com/rust-lang/rust/pull/80527, rustdoc users have an unpleasant situation: they can either use the new tool lint names (`rustdoc::non_autolinks`) or they can use the old names (`non_autolinks`). If they use the tool lints, they get a hard error on stable compilers, because rustc rejects all tool names it doesn't recognize (https://github.com/rust-lang/rust/issues/66079#issuecomment-788589193). If they use the old name, they get a warning to rename the lint to the new name. The only way to compile without warnings is to add `#[allow(renamed_removed_lints)]`, which defeats the whole point of the change: we *want* people to switch to the new name.
To avoid people silencing the lint and never migrating to the tool lint, this avoids warning about the old name, while still allowing you to use the new name. Once the new `rustdoc` tool name makes it to the stable channel, we can change these lints to warn again.
This adds the new lint functions `register_alias` and `register_ignored` - I didn't see an existing way to do this.
r? `@Manishearth` cc `@rust-lang/rustdoc`
Do not insert impl_trait_in_bindings opaque definitions twice.
The reference to the item already appears inside the `OpaqueDef`. It does not need to be repeated as a statement.
More precise spans for HIR paths
`Ty::assoc_item` is lowered to `<Ty>::assoc_item` in HIR, but `Ty` got span from the whole path.
This PR fixes that, and adjusts some diagnostic code that relied on `Ty` having the whole path span.
This is a pre-requisite for https://github.com/rust-lang/rust/pull/82868 (we cannot report suggestions like `Tr::assoc` -> `<dyn Tr>::assoc` with the current imprecise spans).
r? ````@estebank````
Adjust `-Ctarget-cpu=native` handling in cg_llvm
When cg_llvm encounters the `-Ctarget-cpu=native` it computes an
explciit set of features that applies to the target in order to
correctly compile code for the host CPU (because e.g. `skylake` alone is
not sufficient to tell if some of the instructions are available or
not).
However there were a couple of issues with how we did this. Firstly, the
order in which features were overriden wasn't quite right – conceptually
you'd expect `-Ctarget-cpu=native` option to override the features that
are implicitly set by the target definition. However due to how other
`-Ctarget-cpu` values are handled we must adopt the following order
of priority:
* Features from -Ctarget-cpu=*; are overriden by
* Features implied by --target; are overriden by
* Features from -Ctarget-feature; are overriden by
* function specific features.
Another problem was in that the function level `target-features`
attribute would overwrite the entire set of the globally enabled
features, rather than just the features the
`#[target_feature(enable/disable)]` specified. With something like
`-Ctarget-cpu=native` we'd end up in a situation wherein a function
without `#[target_feature(enable)]` annotation would have a broader
set of features compared to a function with one such attribute. This
turned out to be a cause of heavy run-time regressions in some code
using these function-level attributes in conjunction with
`-Ctarget-cpu=native`, for example.
With this PR rustc is more careful about specifying the entire set of
features for functions that use `#[target_feature(enable/disable)]` or
`#[instruction_set]` attributes.
Sadly testing the original reproducer for this behaviour is quite
impossible – we cannot rely on `-Ctarget-cpu=native` to be anything in
particular on developer or CI machines.
cc https://github.com/rust-lang/rust/issues/83027 `@BurntSushi`
Implement (but don't use) valtree and refactor in preparation of use
This PR does not cause any functional change. It refactors various things that are needed to make valtrees possible. This refactoring got big enough that I decided I'd want it reviewed as a PR instead of trying to make one huge PR with all the changes.
cc `@rust-lang/wg-const-eval` on the following commits:
* 2027184 implement valtree
* eeecea9 fallible Scalar -> ScalarInt
* 042f663 ScalarInt convenience methods
cc `@eddyb` on ef04a6d
cc `@rust-lang/wg-mir-opt` for cf1700c (`mir::Constant` can now represent either a `ConstValue` or a `ty::Const`, and it is totally possible to have two different representations for the same value)
Previously, there was no way to add a custom tool prefix, even if the tool
itself had registered a lint:
```
#![feature(register_tool)]
#![register_tool(xyz)]
#![warn(xyz::my_lint)]
```
```
$ rustc unknown-lint.rs --crate-type lib
error[E0710]: an unknown tool name found in scoped lint: `xyz::my_lint`
--> unknown-lint.rs:3:9
|
3 | #![warn(xyz::my_lint)]
| ^^^
```
This allows opting-in to lints from other tools using `register_tool`.
When cg_llvm encounters the `-Ctarget-cpu=native` it computes an
explciit set of features that applies to the target in order to
correctly compile code for the host CPU (because e.g. `skylake` alone is
not sufficient to tell if some of the instructions are available or
not).
However there were a couple of issues with how we did this. Firstly, the
order in which features were overriden wasn't quite right – conceptually
you'd expect `-Ctarget-cpu=native` option to override the features that
are implicitly set by the target definition. However due to how other
`-Ctarget-cpu` values are handled we must adopt the following order
of priority:
* Features from -Ctarget-cpu=*; are overriden by
* Features implied by --target; are overriden by
* Features from -Ctarget-feature; are overriden by
* function specific features.
Another problem was in that the function level `target-features`
attribute would overwrite the entire set of the globally enabled
features, rather than just the features the
`#[target_feature(enable/disable)]` specified. With something like
`-Ctarget-cpu=native` we'd end up in a situation wherein a function
without `#[target_feature(enable)]` annotation would have a broader
set of features compared to a function with one such attribute. This
turned out to be a cause of heavy run-time regressions in some code
using these function-level attributes in conjunction with
`-Ctarget-cpu=native`, for example.
With this PR rustc is more careful about specifying the entire set of
features for functions that use `#[target_feature(enable/disable)]` or
`#[instruction_set]` attributes.
Sadly testing the original reproducer for this behaviour is quite
impossible – we cannot rely on `-Ctarget-cpu=native` to be anything in
particular on developer or CI machines.
2229: Handle patterns within closures correctly when `capture_disjoint_fields` is enabled
This PR fixes several issues related to handling patterns within closures when `capture_disjoint_fields` is enabled.
1. Matching is always considered a use of the place, even with `_` patterns
2. Compiler ICE when capturing fields in closures through `let` assignments
To do so, we
- Introduced new Fake Reads
- Delayed use of `Place` in favor of `PlaceBuilder`
- Ensured that `PlaceBuilder` can be resolved before attempting to extract `Place` in any of the pattern matching code
Closes rust-lang/project-rfc-2229/issues/27
Closes rust-lang/project-rfc-2229/issues/24
r? `@nikomatsakis`
Right now, rustdoc users have an unpleasant situation: they can either
use the new tool lint names (`rustdoc::non_autolinks`) or they can use
the old names (`non_autolinks`). If they use the tool lints, they get a
hard error on stable compilers, because rustc rejects all tool names it
doesn't recognize. If they use the old name, they get a warning to
rename the lint to the new name. The only way to compile without
warnings is to add `#[allow(renamed_removed_lints)]`, which defeats the
whole point of the change: we *want* people to switch to the new name.
To avoid people silencing the lint and never migrating to the tool lint,
this avoids warning about the old name, while still allowing you to use
the new name. Once the new `rustdoc` tool name makes it to the stable
channel, we can change these lints to warn again.
This adds the new lint functions `register_alias` and `register_ignored`
- I didn't see an existing way to do this.
Use delay_span_bug instead of panic in layout_scalar_valid_range
#83054 introduced validation of scalar range attributes, but panicking
code that uses the attribute remained reachable. Use `delay_span_bug`
instead to avoid the ICE.
Fixes#83180.
More informative diagnotic from `x.py test` attempt atop beta checkout
Make bootstrap be more informative when one does `x.py test` on a beta checkout without other mods.
To be clear, by default running `x.py test` on a checkout of the beta branch
currently fails, and with this change will continue to fail, because `x.py
tests` runs `x.py test src/tools/tidy` which tries to run `rustfmt` and that
will fail because the `rustfmt` binary is pinned to the current nighlty and we
do not attempt to distribute one for the beta builds.
This change gives a better error message than the current message, which is just
"./x.py fmt is not supported on this channel" without providing any hint about
what one might do about that problem.
Deprecate RustcEncodable and RustcDecodable.
We can't remove the `RustcEncodable` and `RustcDecodable` derive macros from the prelude, but we can deprecate them.
No background for code in portability snippets
This better matches the appearance of this kind of snippet in the full
item view and is less jarring to read due to repeated
foreground-background changes.
There should be no observable changes to the ayu theme.
Fall-back to sans-serif if Arial is not available
Otherwise on systems where Arial is not available the UA will
fallback to a serif font, rather than a sans-serif one.
This is especially relevant on acessibility-conscious setups (such as is
mine) that have web-fonts disabled and a limited set of fonts available
on the system.
r? ```@GuillaumeGomez``` cc ```@jsha```
