Remove std::io::lazy::Lazy in favour of SyncOnceCell
The (internal) std::io::lazy::Lazy was used to lazily initialize the stdout and stdin buffers (and mutexes). It uses atexit() to register a destructor to flush the streams on exit, and mark the streams as 'closed'. Using the stream afterwards would result in a panic.
Stdout uses a LineWriter which contains a BufWriter that will flush the buffer on drop. This one is important to be executed during shutdown, to make sure no buffered output is lost. It also forbids access to stdout afterwards, since the buffer is already flushed and gone.
Stdin uses a BufReader, which does not implement Drop. It simply forgets any previously read data that was not read from the buffer yet. This means that in the case of stdin, the atexit() function's only effect is making stdin inaccessible to the program, such that later accesses result in a panic. This is uncessary, as it'd have been safe to access stdin during shutdown of the program.
---
This change removes the entire io::lazy module in favour of SyncOnceCell. SyncOnceCell's fast path is much faster (a single atomic operation) than locking a sys_common::Mutex on every access like Lazy did.
However, SyncOnceCell does not use atexit() to drop the contained object during shutdown.
As noted above, this is not a problem for stdin. It simply means stdin is now usable during shutdown.
The atexit() call for stdout is moved to the stdio module. Unlike the now-removed Lazy struct, SyncOnceCell does not have a 'gone and unusable' state that panics. Instead of adding this again, this simply replaces the buffer with one with zero capacity. This effectively flushes the old buffer *and* makes any writes afterwards pass through directly without touching a buffer, making print!() available during shutdown without panicking.
---
In addition, because the contents of the SyncOnceCell are no longer dropped, we can now use `&'static` instead of `Arc` in `Stdout` and `Stdin`. This also saves two levels of indirection in `stdin()` and `stdout()`, since Lazy effectively stored a `Box<Arc<T>>`, and SyncOnceCell stores the `T` directly.
Return values up to 128 bits in registers
This fixes https://github.com/rust-lang/rust/issues/26494#issuecomment-619506345 by making Rust's default ABI pass return values up to 128 bits in size in registers, just like the System V ABI.
The result is that these methods from the comment linked above now generate the same code, making the Rust ABI as efficient as the `"C"` ABI:
```rust
pub struct Stats { x: u32, y: u32, z: u32, }
pub extern "C" fn sum_c(a: &Stats, b: &Stats) -> Stats {
return Stats {x: a.x + b.x, y: a.y + b.y, z: a.z + b.z };
}
pub fn sum_rust(a: &Stats, b: &Stats) -> Stats {
return Stats {x: a.x + b.x, y: a.y + b.y, z: a.z + b.z };
}
```
```asm
sum_rust:
movl (%rsi), %eax
addl (%rdi), %eax
movl 4(%rsi), %ecx
addl 4(%rdi), %ecx
movl 8(%rsi), %edx
addl 8(%rdi), %edx
shlq $32, %rcx
orq %rcx, %rax
retq
```
Rollup of 10 pull requests
Successful merges:
- #76917 (Add missing code examples on HashMap types)
- #77107 (Enable const propagation into operands at mir_opt_level=2)
- #77129 (Update cargo)
- #77167 (Fix FIXME in core::num test: Check sign of zero in min/max tests.)
- #77184 (Rust vec bench import specific rand::RngCore)
- #77208 (Late link args order)
- #77209 (Fix documentation highlighting in ty::BorrowKind)
- #77231 (Move helper function for `missing_const_for_fn` out of rustc to clippy)
- #77235 (pretty-print-reparse hack: Rename some variables for clarity)
- #77243 (Test more attributes in test issue-75930-derive-cfg.rs)
Failed merges:
r? `@ghost`
Test more attributes in test issue-75930-derive-cfg.rs
Split out from #76130
This tests our handling of combining derives, derive helper
attributes, attribute macros, and `cfg`/`cfg_attr`
pretty-print-reparse hack: Rename some variables for clarity
This will also make it easier to make the comparisons asymmetric.
Also one impossible case is removed.
r? @Aaron1011
Move helper function for `missing_const_for_fn` out of rustc to clippy
cc @rust-lang/clippy @ecstatic-morse #76618
r? @Manishearth
I also removed all support for suggesting a function could be `const fn` when that would require feature gates to actually work.
This means we'll now have to maintain this ourselves in clippy, but that's how most lints work anyway, so...
Late link args order
MSYS2 changed how winpthreads is built and as the result it now depends on more mingw-w64 libraries.
This PR affects only MinGW targets since nobody else is using `late_link_args_{dynamic,static}`. Now the order is similar to how it used to be before https://github.com/rust-lang/rust/pull/67502.
Rust vec bench import specific rand::RngCore
Using `RngCore` import for side effects is clearer than `*` which may bring it unnecessary more stuff than needed, it is also more explicit doing so.
@pickfire change `LEN = 16384` (and pos) and `once` instead of `[0].iter()` after this.
@rustbot modify labels: +C-cleanup +A-testsuite
Update cargo
7 commits in 8777a6b1e8834899f51b7e09cc9b8d85b2417110..05c611ae3c4255b7a2bcf4fcfa65b20286a07839
2020-09-15 19:11:03 +0000 to 2020-09-23 23:10:38 +0000
- --workspace flag for locate-project to find the workspace root (rust-lang/cargo#8712)
- Remove some badges documentation. (rust-lang/cargo#8727)
- Add plain message format for locate-project (rust-lang/cargo#8707)
- Add a term option to configure the progress bar (rust-lang/cargo#8165)
- Replace d_as_f64 with as_secs_f64 (rust-lang/cargo#8721)
- Add cross check to filters_target test. (rust-lang/cargo#8713)
- Add test for whitespace behavior in env flags. (rust-lang/cargo#8706)
Enable const propagation into operands at mir_opt_level=2
Feature was added in #74507 but gated with `mir_opt_level>=3` because of compile time regressions. Let's see whether the LLVM 11 update solves that.
As the [perf results](https://github.com/rust-lang/rust/pull/77107#issuecomment-697668154) show, enabling this optimization results in a lot less regression as before.
cc @oli-obk
r? @ghost
Encode less metadata for proc-macro crates
Currently, we serialize the same crate metadata for proc-macro crates as
we do for normal crates. This is quite wasteful - almost none of this
metadata is ever used, and much of it can't even be deserialized (if it
contains a foreign `CrateNum`).
This PR changes metadata encoding to skip encoding the majority of crate
metadata for proc-macro crates. Most of the `Lazy<[T]>` fields are left
completetly empty, while the non-lazy fields are left as-is.
Additionally, proc-macros now have a def span that does not include
their body. This was done for normal functions in #75465, but was missed
for proc-macros.
As a result of this PR, we should only ever encode local `CrateNum`s
when encoding proc-macro crates. I've added a specialized serialization
impl for `CrateNum` to assert this.
Currently, we serialize the same crate metadata for proc-macro crates as
we do for normal crates. This is quite wasteful - almost none of this
metadata is ever used, and much of it can't even be deserialized (if it
contains a foreign `CrateNum`).
This PR changes metadata encoding to skip encoding the majority of crate
metadata for proc-macro crates. Most of the `Lazy<[T]>` fields are left
completetly empty, while the non-lazy fields are left as-is.
Additionally, proc-macros now have a def span that does not include
their body. This was done for normal functions in #75465, but was missed
for proc-macros.
As a result of this PR, we should only ever encode local `CrateNum`s
when encoding proc-macro crates. I've added a specialized serialization
impl for `CrateNum` to assert this.
Remove TrustedLen requirement from BuilderMethods::switch
The main use case of TrustedLen is allowing APIs to specialize on it,
but no use of it uses that specialization. Instead, only the .len()
function provided by ExactSizeIterator is used, which is already
required to be accurate.
Thus, the TrustedLen requirement on BuilderMethods::switch is redundant.
Add `#![feature(const_fn_floating_point_arithmetic)]`
cc #76618
This is a template for splitting up `const_fn` into granular feature gates. I think this will make it easier, both for us and for users, to track stabilization of each individual feature. We don't *have* to do this, however. We could also keep stabilizing things out from under `const_fn`.
cc @rust-lang/wg-const-eval
r? @oli-obk
Add `x.py setup`
Closes#76503.
- Suggest `x.py setup` if config.toml doesn't exist yet
- Prompt for a profile if not given on the command line
- Print the configuration that will be used
- Print helpful starting commands after setup
- Link to the dev-guide after finishing
Explicitly document the size guarantees that Option makes.
Triggered by a discussion on wg-unsafe-code-guidelines about which layouts of `Option<T>` one can guarantee are optimised to a single pointer.
CC @RalfJung
Std/thread: deny unsafe op in unsafe fn
Partial fix of #73904.
This encloses `unsafe` operations in `unsafe fn` in `libstd/thread`.
`@rustbot` modify labels: F-unsafe-block-in-unsafe-fn
Move from {{closure}}#0 syntax to {closure#0} for (def) path components
Part of #70334
I followed the approach described by `@eddyb` and introduced a `DefPathDataName` enum.
To preserve compatibility, in various places, I had to rely on formatting manually by calling `format!("{{{{{}}}}}", namespace)`.
My questions are:
* Do we want to convert for places to use the new naming scheme? Or shall I re-add `DefPathData::as_symbol` but renamed as `DefPathData::as_legacy_symbol` to avoid manually allocating the legacy symbols?
* Do we want to `impl Display for DisambiguatedDefPathData` to avoid manually calling `write!(s, "{{{}#{}}}", namespace, component.disambiguator)`?
* We might also want to improve naming for `DefPathDataName` and `DefPathData::get_name`
r? `@eddyb`
Mara Bos
bors
Jonas Schievink
Aaron Hill
Vadim Petrochenkov
Oliver Scherer
Ralf Jung
Guillaume Gomez
Bastian Kauschke
est31
Joshua Nelson
Camelid