pleroma/docs/installation/alpine_linux_en.md

233 lines
6.5 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# Installing on Alpine Linux
## Installation
This guide is a step-by-step installation guide for Alpine Linux. The instructions were verified against Alpine v3.10 standard image. You might miss additional dependencies if you use `netboot` instead.
It assumes that you have administrative rights, either as root or a user with [sudo permissions](https://www.linode.com/docs/tools-reference/custom-kernels-distros/install-alpine-linux-on-your-linode/#configuration). If you want to run this guide with root, ignore the `sudo` at the beginning of the lines, unless it calls a user like `sudo -Hu pleroma`; in this case, use `su -l <username> -s $SHELL -c 'command'` instead.
### Required packages
* `postgresql`
* `elixir`
* `erlang`
* `erlang-parsetools`
* `erlang-xmerl`
* `git`
* Development Tools
#### Optional packages used in this guide
* `nginx` (preferred, example configs for other reverse proxies can be found in the repo)
* `certbot` (or any other ACME client for Lets Encrypt certificates)
### Prepare the system
* The community repository must be enabled in `/etc/apk/repositories`. Depending on which version and mirror you use this looks like `http://alpine.42.fr/v3.10/community`. If you autogenerated the mirror during installation:
```shell
awk 'NR==2' /etc/apk/repositories | sed 's/main/community/' | tee -a /etc/apk/repositories
```
* Then update the system, if not already done:
```shell
sudo apk update
sudo apk upgrade
```
* Install some tools, which are needed later:
```shell
sudo apk add git build-base
```
### Install Elixir and Erlang
* Install Erlang and Elixir:
```shell
sudo apk add erlang erlang-runtime-tools erlang-xmerl elixir
```
* Install `erlang-eldap` if you want to enable ldap authenticator
```shell
sudo apk add erlang-eldap
```
### Install PostgreSQL
* Install Postgresql server:
```shell
sudo apk add postgresql postgresql-contrib
```
* Initialize database:
```shell
sudo /etc/init.d/postgresql start
```
* Enable and start postgresql server:
```shell
sudo rc-update add postgresql
```
### Install PleromaBE
* Add a new system user for the Pleroma service:
```shell
sudo addgroup pleroma
sudo adduser -S -s /bin/false -h /opt/pleroma -H -G pleroma pleroma
```
**Note**: To execute a single command as the Pleroma system user, use `sudo -Hu pleroma command`. You can also switch to a shell by using `sudo -Hu pleroma $SHELL`. If you dont have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l pleroma -s $SHELL -c 'command'` and `su -l pleroma -s $SHELL` for starting a shell.
* Git clone the PleromaBE repository and make the Pleroma user the owner of the directory:
```shell
sudo mkdir -p /opt/pleroma
sudo chown -R pleroma:pleroma /opt/pleroma
sudo -Hu pleroma git clone -b stable https://git.pleroma.social/pleroma/pleroma /opt/pleroma
```
* Change to the new directory:
```shell
cd /opt/pleroma
```
* Install the dependencies for Pleroma and answer with `yes` if it asks you to install `Hex`:
```shell
sudo -Hu pleroma mix deps.get
```
* Generate the configuration: `sudo -Hu pleroma mix pleroma.instance gen`
* Answer with `yes` if it asks you to install `rebar3`.
* This may take some time, because parts of pleroma get compiled first.
* After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`.
* Check the configuration and if all looks right, rename it, so Pleroma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
```shell
mv config/{generated_config.exs,prod.secret.exs}
```
* The previous command creates also the file `config/setup_db.psql`, with which you can create the database:
```shell
sudo -Hu postgres psql -f config/setup_db.psql
```
* Now run the database migration:
```shell
sudo -Hu pleroma MIX_ENV=prod mix ecto.migrate
```
* Now you can start Pleroma already
```shell
sudo -Hu pleroma MIX_ENV=prod mix phx.server
```
### Finalize installation
If you want to open your newly installed instance to the world, you should run nginx or some other webserver/proxy in front of Pleroma and you should consider to create an OpenRC service file for Pleroma.
#### Nginx
* Install nginx, if not already done:
```shell
sudo apk add nginx
```
* Setup your SSL cert, using your method of choice or certbot. If using certbot, first install it:
```shell
sudo apk add certbot
```
and then set it up:
```shell
sudo mkdir -p /var/lib/letsencrypt/
sudo certbot certonly --email <your@emailaddress> -d <yourdomain> --standalone
```
If that doesnt work, make sure, that nginx is not already running. If it still doesnt work, try setting up nginx first (change ssl “on” to “off” and try again).
* Copy the example nginx configuration to the nginx folder
```shell
sudo cp /opt/pleroma/installation/pleroma.nginx /etc/nginx/conf.d/pleroma.conf
```
* Before starting nginx edit the configuration and change it to your needs. You must change change `server_name` and the paths to the certificates. You can use `nano` (install with `apk add nano` if missing).
```
server {
server_name your.domain;
listen 80;
...
}
server {
server_name your.domain;
listen 443 ssl http2;
...
ssl_trusted_certificate /etc/letsencrypt/live/your.domain/chain.pem;
ssl_certificate /etc/letsencrypt/live/your.domain/fullchain.pem;
ssl_certificate_key /etc/letsencrypt/live/your.domain/privkey.pem;
...
}
```
* Enable and start nginx:
```shell
sudo rc-update add nginx
sudo service nginx start
```
If you need to renew the certificate in the future, uncomment the relevant location block in the nginx config and run:
```shell
sudo certbot certonly --email <your@emailaddress> -d <yourdomain> --webroot -w /var/lib/letsencrypt/
```
#### OpenRC service
* Copy example service file:
```shell
sudo cp /opt/pleroma/installation/init.d/pleroma /etc/init.d/pleroma
```
* Make sure to start it during the boot
```shell
sudo rc-update add pleroma
```
#### Create your first user
If your instance is up and running, you can create your first user with administrative rights with the following task:
```shell
sudo -Hu pleroma MIX_ENV=prod mix pleroma.user new <username> <your@emailaddress> --admin
```
#### Further reading
{! backend/installation/further_reading.include !}
## Questions
Questions about the installation or didnt it work as it should be, ask in [#pleroma:matrix.org](https://matrix.heldscal.la/#/room/#freenode_#pleroma:matrix.org) or IRC Channel **#pleroma** on **Freenode**.