binutils-gdb/binutils/ChangeLog

Sun Mar 27 16:23:39 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* More fixes for object formats which allow multiple sections
	with the same name:
	* objcopy.c (setup_section): Make a new output section even if
	one already exists with the given name.
	(copy_section): Use isection->output_section rather than trying
	to look the output section up by its (possibly non-unique) name.

	* Makefile.in (install-info): Look for binutils.info in the
	current directory, then in $(srcdir).  Don't use $<.

Mon Mar 21 12:55:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* objdump.c (objdump_print_address): Make static.  Declare with
	prototype.  Change vardiff from int to bfd_signed_vma.  Correct
	binary search termination condition.  When looking for same
	section symbol in relocatable file, handle final symbol correctly.

Sun Mar 20 11:26:36 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* Makefile.in: Avoid bug in hpux sed.

	* objcopy.c: Changes to keep it from stripping symbols used
	in output relocations.
	(mark_symbols_used_in_relocations): New function.  Mark symbols
	used in output relocations with BSF_KEEP.
	(filter_symbols): Do not strip symbols marked with BSF_KEEP.
	(copy_object): Reorder actions.  First setup sections, then
	build the output symbol table, then copy the section contents.

Fri Mar 18 10:53:55 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* ar.c (write_archive): Allocate space for the null byte.  From
	Robert Lipe <robertl@arnet.com>.

Thu Mar 17 16:20:28 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* Makefile.in: Built nm.new and strip.new to avoid problems with
	collect when . is in PATH.
	(STRIP_PROG): Change from strip to strip.new.
	(NM_PROG): Change from nm to nm.new.
	(install): Remove the .new when installing.

start-sanitize-powerpc-netware
Wed Mar 16 16:27:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* nlmconv.c (powerpc_build_stubs): Set BSF_DYNAMIC flag for each
	symbol for which we build a stub.
	(powerpc_mangle_relocs): Only reset TOC pointer for a call to a
	symbol with BSF_DYNAMIC flag set.

end-sanitize-powerpc-netware
Tue Mar 15 23:04:13 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* objcopy.c (filter_symbols): Use bfd_is_local_label to determine
	if a symbol represents a compiler-generated local label.
	(copy_object): Give the BFD backends a chance to copy any private
	bfd data from the input BFD to the output BFD.
	(setup_section): Give the BFD backends a chance to copy any private
	section data from the input section to the output section.

Mon Mar 14 11:15:58 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* objcopy.c (mangle_section): Delete unused function.
	(setup_section): Set osection here instead of calling
	mangle section to do it.

Mon Mar 14 12:11:01 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* ar.c (write_archive): Close inarch before unlinking it.

start-sanitize-powerpc-netware
Fri Mar 11 22:20:48 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* nlmconv.c (main): For PowerPC, call powerpc_build_stubs and
	powerpc_resolve_stubs.  Use __GOT0, not __toc_start.  Handle it if
	the start and end symbols are not in the text section.
	(struct powerpc_stub): New struct definition.
	(powerpc_stubs, powerpc_stub_insns): New static variables.
	(powerpc_initial_got_size): New static variable.
	(powerpc_build_stubs): New function.
	(powerpc_resolve_stubs): New function.
	(powerpc_mangle_relocs): Clear extraneous data in .got section.
	Rearrange reloc handling to handle ELF relocs that are not
	partial_inplace.  Resolve PC relative relocs.

end-sanitize-powerpc-netware
Wed Mar  9 13:48:11 1994  Steve Chamberlain  (sac@jonny.cygnus.com)

	* ar.c (move_members): Fix it so that the abi positional modifiers
	don't delete all archive members following the insert point.

Tue Mar  8 13:14:43 1994  Steve Chamberlain  (sac@jonny.cygnus.com)

	* coffgrok.[ch]: New files, understand coff objects.
	* coffdump.c: Uses coffgrok to dump out the debug info of a coff
	file.
	* sysroff.info: Description of a SYSROFF object file.
	* sysinfo.y, syslex.l: Parse info file, generate a reader, writer,
	header files and a printer.
	* srconv.c: Uses coffgrok.c and sysroff.info to convert a coff
	file to a SYSROFF file.

Sat Feb 26 13:35:26 1994  Stan Shebs  (shebs@andros.cygnus.com)

	* ar.c (do_quick_append): Pad with a genuine character 10,
	rather than whatever '\n' might happen to be.

Tue Feb 22 18:25:52 1994  Ian Lance Taylor  (ian@cygnus.com)

	* nlmconv.c (main): Ignore debugging symbols when looking for
	special symbols by name.

Sun Feb 20 18:47:42 1994  Ian Lance Taylor  (ian@lisa.cygnus.com)

	* nlmconv.c: Include libiberty.h.
start-sanitize-powerpc-netware
	Support for PowerPC NetWare.
	* nlmconv.c (main): For PowerPC NetWare, automatically define the
	special symbols __toc_start.
	(select_output_format): Handle bfd_arch_powerpc.
	(mangle_relocs): Likewise.
	(powerpc_mangle_relocs): New function.
end-sanitize-powerpc-netware

Thu Feb 17 09:28:23 1994  David J. Mackenzie  (djm@thepub.cygnus.com)

	* ar.c, bucomm.c, nlmconv.c, nm.c, objcopy.c, objdump.c, 
	size.c: Use bfd_get_error and bfd_set_error and new error names.

Fri Feb 11 15:54:51 1994  David J. Mackenzie  (djm@thepub.cygnus.com)

	* objcopy.c (strip_main, copy_main): Add missing 'break' in switch.

Mon Feb  7 19:45:52 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* objdump.c (disassemble_data): Handle bfd_arch_powerpc.

Sun Feb  6 22:08:20 1994  David J. Mackenzie  (djm@thepub.cygnus.com)

	* strings.c objdump.c nlmconv.c objcopy.c nm.c ar.c size.c (main):
	Call xmalloc_set_program_name.

Fri Feb  4 10:46:01 1994  David J. Mackenzie  (djm@thepub.cygnus.com)

	* objcopy.c (filter_bytes): Make MEMHUNK a char *, not PTR, so we
	can do arithmetic on it.

Thu Feb  3 14:06:41 1994  David J. Mackenzie  (djm@thepub.cygnus.com)

	* objdump.c (dump_section_stabs, read_section_stabs,
	print_section_stabs): Functions broken out of dump_stabs_1.
	Free the stabs and strings when done with them.

Wed Feb  2 13:42:23 1994  David J. Mackenzie  (djm@thepub.cygnus.com)

	* nlmconv.c (main): Use bfd_get_flavour instead of struct member.
	* ar.c (print_contents, extract_file), size.c
	(print_berkeley_format, print_sysv_format): Use bfd_get_filename and 
	bfd_my_archive instead of dereferencing the structs directly.

	* ar.c: Use bfd_fatal and bfd_nonfatal instead of bfd_perror and exit.
	Indent.  Remove DEFUNs.

	* nlmconv.c (main), objcopy.c (copy_file): Print matching formats
	if ambiguous match.
	* nm.c (display_file, display_archive), size.c (display_bfd):
	Eliminate gotos.
	Print matching formats if there is an ambiguous match.  Use
	bfd_nonfatal instead of hardcoded error message if nothing matches.

	* arsup.c, ar.c, objdump.c: Use bfd_get_filename instead of
	abfd->filename. 

	* nm.c (display_archive): New function, from code in display_file.
	(display_rel_file): Renamed from do_one_rel_file.

	* size.c: Indent.
	(display_archive): New function from code in display_file.
	(display_file): Check bfd_close error return.

	* strings.c (strings_object_file): Check bfd_check_format
	error return.

	* strings.c, objdump.c, size.c: Use bfd_nonfatal instead of bfd_perror.

	* bucomm.c: Delete references to exit_handler.  It wasn't set
	anywhere, and now that we're using the libiberty xmalloc, it
	wouldn't always get called before exiting.
	(list_matching_formats): Function moved from objdump.c.
	* bucomm.h: Declare it.

	* objdump.c (disassemble_data): Move some variable decls closer to
	their use.  Add some comments.  Replace a nested block with a
	return. 

Mon Jan 31 18:50:41 1994  Stan Shebs  (shebs@andros.cygnus.com)

	* objdump.c (display_target_list, display_info_table): Check that
	the bfd of the dummy output file is not null.

Wed Jan 26 13:13:18 1994  David J. Mackenzie  (djm@thepub.cygnus.com)

	* objcopy.c (filter_bytes): New function.
	(copy_section): Call it.
	(copy_options, copy_usage, copy_main): Add --byte option to
	activate it.  Appropriate the -b option (which was an undocumented
	synonym for -F) for it, also.  Add --interleave, -i option for
	additional control.
	(setup_section, copy_section, mangle_section): Renamed with no `s'
	on the end.
	* objcopy.1, binutils.texi: Document the new options.

	* objdump.c (display_target_tables, display_target_list):
	New functions broken out of display_info.
	Eliminate some magic constants.  Use more meaningful variable names.
	(dump_bfd_header): New function broken out of display_bfd.
	(dump_section_header): New function broken out of dump_headers.
	(remove_useless_symbols): Don't shadow global variable name with
	parameter. 
	(objdump_print_address): Fix backward test.

Tue Jan 25 19:40:54 1994  Stan Shebs  (shebs@andros.cygnus.com)

	* bucomm.c (print_arelt_descr): Change decl of `when' to time_t.
	* objdump.h: Removed.

Mon Jan 24 13:29:02 1994  David J. Mackenzie  (djm@thepub.cygnus.com)

	* objdump.c (display_file): Remove call to list_matching_formats.
	It would never be called.
	(list_matching_formats): Take an arg giving the list of matching
	formats.
	(display_bfd): Pass the arg, and get it filled in by calling
	bfd_check_format_matches instead of bfd_check_format.
	(display_info, display_info_table): target_vector was renamed to
	bfd_target_vector. 

	* binutils.texi (objdump): Note some limitations of -h section
	address printing.

Sat Jan 22 16:20:46 1994  Stan Shebs  (shebs@andros.cygnus.com)

	* Makefile.in (MALLOC): Set to emptiness by default.
	(ALL_CFLAGS): Add and use.
	(arparse.h): Make it depend on arparse.y.
	* ar.c (libbfd.h): Don't require to be in ../bfd.
	* objdump.c (comp): Rename to compare_symbols.

Fri Jan 21 20:22:30 1994  David J. Mackenzie  (djm@thepub.cygnus.com)

	* objdump.c (list_matching_formats): If the file format is ambiguous,
	print the matching names so the user can choose one.
	(display_bfd): Call it.
	(display_file): Call it.

Fri Jan 21 19:17:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* objdump.c (disassemble_data): Support bfd_arch_rs6000.

Mon Jan 17 13:57:25 1994  Stan Shebs  (shebs@andros.cygnus.com)

	* objdump.c (stab_name): Allocate dynamically.
	(stab_print): Use pointers to strings instead of char arrays.
	(dump_stabs): Change alloc and init of arrays appropriately.	
	(dump_stabs_1): Always decide whether to print stab_name or
	the stab's type number, if unnamed.

Fri Jan 14 14:42:48 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* objcopy.c (strip_main, copy_main): Don't clobber the input file
	if copy_file fails.

	* nlmconv.c (main): Warn about an attempt to use a shared library
	with uninitialized data.

	* nlmconv.c (setup_sections): Make sure that we align the
	output_offset of each input section appropriately.

Thu Jan 13 17:32:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* objdump.c (dump_relocs): Don't crash if section name is NULL.

Tue Jan 11 19:46:33 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* filemode.c (filemodestring): Commented out; not used.
	(mode_string): Use POSIX definitions.
	(ftypelet): Likewise.
	(rwx): Removed; no longer used.
	* bucomm.c: Include bucomm.h.
	(bfd_nonfatal, bfd_fatal): Argument is const.
	(fatal): Make __STDC__ version.
	* bucomm.h (mode_string): Declare.
	* Makefile.in (bucomm.o): Depend upon bucomm.h

Sun Jan  9 12:03:20 1994  Ken Raeburn  (raeburn@rtl.cygnus.com)

	* bucomm.c (xmalloc, xrealloc): Deleted.
	* bucomm.h (xmalloc, xrealloc): Fix prototypes, to correspond to
	libiberty version of functions.

Thu Jan  6 06:18:15 1994  David J. Mackenzie  (djm@thepub.cygnus.com)

	* binutils.texi: Add a chapter summarizing the ways to select
	aspects of the target for each program.

	* objdump.c (long_options, usage): Add long equivalents for all
	remaining short options that lacked them.
	* binutils.texi objdump.1: Document them.

	* size.c (usage): Tweak usage message.
	* size.1: Add missing `=' in examples.

	* binutils.texi strip.1 objcopy.1 nlmconv.1 objcopy.c nlmconv.c:
	Use "--target=bfdname" as the option to select the BFD target,
	like nm and size already do.
	Reserve "--format=format" for textual output selection options, but
	for now keep old option names as obsolete for backward compatibility.

	* strings.c (main, strings_object_file, usage): Add --target option.
	* binutils.texi strings.1: Document it.

Sat Jan  1 13:58:24 1994  David J. Mackenzie  (djm@thepub.cygnus.com)

	* ar.c (main): Add \n in error message.

Thu Dec 23 12:23:11 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	gcc -Wall lint:
	* ar.c (main): Put parens around assignment used as truth value.
	* objcopy.c (strip_main): Remove unused variables.  Return 0.
	(copy_main): Remove unused variables.  Return 0.
	* objdump.c (display_bfd): Declare return value as void.
	(stab_print): Use "" instead of 0 to initialize array.
	(dump_stabs_1): Print vma using printf_vma.
	(display_info): Put parens around assignment used as truth value.
	* strings.c (print_strings): Cast printf arguments.

	* objcopy.c (copy_main): Use copy_options, not strip_options.

	* nlmheader.y (command): Warn about illegal date values.

Wed Dec 15 11:18:03 1993  David J. MacKenzie  (djm@frosty.eng.umd.edu)

	* bucomm.c bucomm.h: Run through indent.  De-ansidecl-ify.
	(bfd_nonfatal): New function.
	(bfd_fatal): Call it.

	* objcopy.c (smart_rename): Do a copy if the dest file has
	multiple hard links.  Remove source file on successful copy.
	Try to preserve mode and owner on successful rename.

	* objcopy.c: Run through indent.  Clean up a bit.
	Make global variables static.
	Make {input,output}_{target,filename}, show_version local
	to various functions.
	New global variable `status' for exit status.
	(strip_main, copy_main): New functions with code from main.
	(nonfatal): New macro.  Use it globally instead of bfd_perror and
	bfd_fatal.

	(copy_object): Call mangle_sections with bfd_map_over_sections.
	(mangle_sections): Adjust for new calling convention.

Fri Dec 10 11:28:11 1993  Ian Lance Taylor  (ian@deneb.cygnus.com)

	* nlmheader.y (command): Accept MAP and FULLMAP without arguments.
	* nlmconv.c (main): Change error message for MAP and FULLMAP.

Thu Dec  9 17:47:19 1993  Ian Lance Taylor  (ian@deneb.cygnus.com)

	* nlmconv.c (main): Warn about imported symbols that are not in
	the IMPORT list even if the IMPORT keyword is not used.

	* nlmconv.c (debug, unlink_on_exit): New static variables.
	(long_options): Add "debug" and "linker".
	(main): Handle -d and -l arguments.  Make command line input and
	output files optional.  Parse the command file before opening the
	BFD's, which requires storing more information in local variables.
	If INPUT names multiple files, link them together.  Use OUTPUT for
	the output file name if not named on command line.
	(show_usage): Changed for new options.
	(link_inputs): New function to automatically invoke linker to
	handle multiple INPUT files.
	(choose_temp_base_try, choose_temp_base, pexecute): New functions,
	mostly copied from gcc/gcc.c.
	* nlmconv.h (input_files, output_file): Declare.
	* nlmheader.y (input_files, output_file): Define.
	(command): Support INPUT with a string_list argument.  Support
	OUTPUT.
	(string_list): Renamed from module_list.
	* Makefile.in (nlmconv.o): Define LD_NAME based on
	program_transform_name.

Wed Dec  8 10:09:04 1993  Ian Lance Taylor  (ian@deneb.cygnus.com)

	* nlmheader.y (nlmheader_identify): New function.  Use it to print
	the program name just once, instead of with every error message.

Mon Dec  6 16:11:32 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* nlmconv.c (long_options): Changed --header-info to --header-file
	to match documentation and usage message.

Sun Dec  5 01:31:01 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* objdump.c (dump_relocs): Avoid dereferencing a NULL sym_ptr_ptr
	in a relocation.

Thu Dec  2 16:00:06 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* nlmconv.c (main): Change various types from bfd_size_type to
	size_t, since they have to be arguments to fread and fwrite.
	Change set from char * to unsigned char *.
	(select_output_format): Make mach argument unsigned.  Handle
	bfd_arch_alpha.
	(setup_sections): Don't copy the .reginfo section of an ECOFF
	file.  Call bfd_set_reloc to initialize the relocation fields.
	(copy_sections): Don't copy the .reginfo section of an ECOFF file.
	Combine all relocs for a section.
	(mangle_relocs): Change type of relocs to permit specific
	functions to change it.  Call alpha_mangle_relocs for alpha,
	default_mangle_relocs for other architectures.
	(default_mangle_relocs): New function.  Adjust the address of all
	relocs by the output_offset.
	(i386_mangle_relocs): Change type of relocs argument.  Cast length
	argument to memmove to size_t.
	(alpha_mangle_relocs): New function.	

Wed Nov 17 17:38:58 1993  Sean Eric Fagan  (sef@cygnus.com)

	* nlmconv.c (select_output_format): Use nlm32-sparc for
	bfd_arch_sparc.

Wed Nov 17 14:41:35 1993  Jeffrey Osier  (jeffrey@thepub.cygnus.com)

        * nlmconv.1:   added man page
	* objcopy.1:   fixed format errors

Wed Nov 17 12:03:41 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* Makefile.in: Use CFLAGS as well as LDFLAGS when linking.

Wed Nov 17 04:50:55 1993  David J. Mackenzie  (djm@thepub.cygnus.com)

	* strings.1: Fix typo.

Mon Nov 15 12:03:20 1993  Ken Raeburn  (raeburn@rtl.cygnus.com)

	* Makefile.in (DISTSTUFF): Build "info".
	(VERSION): Updated to cygnus-2.3.1; 2.3 has gone out.

Sun Nov 14 00:27:24 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* objdump.c (dump_stabs): Handle stabs-in-som as implemented
	by the new BFD SOM assembler.

Sat Nov 13 07:14:05 1993  David J. Mackenzie  (djm@rtl.cygnus.com)

	* ar.1 c++filt.1 nm.1 objcopy.1 objdump.1 ranlib.1 size.1
	strings.1 strip.1: Replace \(em in NAME section with \- so
	makewhatis can grok it.

Tue Nov  9 15:22:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* nlmconv.c (i386_mangle_relocs): Adjust reloc address by
	section output_offset.

Fri Nov  5 12:11:52 1993  Jeffrey Osier  (jeffrey@thepub.cygnus.com)

	* binutils.texi:  added nlmconv chapter

Wed Nov  3 16:10:50 1993  Jeffrey Wheat  (cassidy@cygnus.com)

	* Makefile.in: Change RUNTESTFLAGS to RUNTEST_FLAGS

Wed Nov  3 15:09:23 1993  Ken Raeburn  (raeburn@rover.cygnus.com)

	* Makefile.in (distclean): Don't get rid of dvi or info files.

Tue Nov  2 13:29:59 1993  David J. Mackenzie  (djm@rtl.cygnus.com)

	* objcopy.c (S_ISLNK): Define as 0 if there's no S_IFLNK.

Fri Oct 29 16:02:34 1993  David J. Mackenzie  (djm@thepub.cygnus.com)

	* binutils.texi: Move objcopy docs into alphabetical order.

	* objdump.c: Use xmalloc instead of malloc.

Fri Oct 29 11:11:14 1993  Stan Shebs  (shebs@rtl.cygnus.com)

	* objdump.c (info): Rename to formats_info.
	(dump_stabs_1): Better comments and formatting.

Thu Oct 28 19:43:16 1993  Stan Shebs  (shebs@rtl.cygnus.com)

	* ar.c (main): Always create the archive when quick appending,
	even if no input files have been given.

Wed Oct 27 12:03:06 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* nlmconv.c (main): Set sharedDebugRecordOffset and
	sharedDebugRecordCount fields in extended header.

	* nlmconv.c (main): Force moduleName field to upper case.

Mon Oct 25 16:45:42 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* objcopy.c (main): Give a usage message if there are too many
	arguments.

Mon Oct 25 10:37:08 1993  Ken Raeburn  (raeburn@rover.cygnus.com)

	* Makefile.in (install-info): Rewrite to take advantage of VPATH,
	so FSF distributions (with info files in $(srcdir)) install
	properly.
	(DISTSTUFF): Build nlmheader.c too.

Fri Oct 22 11:43:23 1993  Ken Raeburn  (raeburn@rover.cygnus.com)

	* ar.c (program_name): Don't define here.
	* objdump.c: Include "bucomm.h".
	(xmalloc): Don't declare here.
	(program_name): Don't define here.
	(program_version): Fixed type in declaration.
	* size.c: Include "bucomm.h".
	(program_name): Don't declare here.

Fri Oct 22 14:10:41 1993  Mark Eichin  (eichin@cygnus.com)

	* objdump.c (fprintf): hide declaration in FPRINTF_ALREADY_DECLARED

Fri Oct  1 12:43:00 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* nlmconv.c (i386_mangle_relocs): Resolve and remove PC relative
	relocs against defined symbols in the same section.

Thu Sep 30 16:46:26 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)

	* Makefile.in (binutils.dvi): use TEXIDIR to find texinfo.tex

Sat Sep 25 18:09:29 1993  David J. Mackenzie  (djm@thepub.cygnus.com)

	* objcopy.c (simple_copy, smart_rename): New functions.
	(main): Use them.

Fri Sep 24 15:38:29 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* Makefile.in (clean, distclean): Recurse into testsuite.

Thu Sep 23 01:05:06 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* objcopy.c (setup_sections, copy_sections): If stripping, don't
	copy SEC_DEBUGGING sections.
	* objdump.c (dump_headers): Print SEC_DEBUGGING flag.

	* objdump.c (usage): Mention --stabs.

	* objcopy.c (copy_object): Copy all applicable file flags.
	(copy_file): Don't copy EXEC_P specially here.

Mon Sep 20 19:28:57 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* nlmconv.c (main): Adjust data section size to correspond to bss
	alignment adjustment.  Clear BSF_SECTION_SYM if symbol is moved to
	a different section.  Use time_t for time variable.
	(setup_sections): Only put sections with contents in output NLM.
	(i386_mangle_relocs): No symbols are common at this point.  Add
	casts to avoid warnings.	

Fri Sep 10 11:00:40 1993  Stan Shebs  (shebs@rtl.cygnus.com)

	* objdump.c: Made the --stabs option work for stabs-in-coff.
	(ELF_STAB_DISPLAY): Removed.
	(dump_elf_stabs): Renamed to dump_stabs, changed to run for
	any object file format.
	(dump_elf_stabs_1): Renamed to dump_stabs_1, added calls to
	generic BFD routines for non-ELF case, changed format of message
	for no-section-found case.
	(display_bfd): Always call dump_stabs if requested.
	(dump_data): Call bfd_section_size to get section size.

Fri Sep 10 08:12:23 1993  David J. Mackenzie  (djm@thepub.cygnus.com)

	* Makefile.in (install): Don't put strings in tooldir/bin.

Mon Sep  6 15:39:04 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* nlmconv.c (total_bss_size): Removed.
	(main): Set the bss vma to always follow the data section.  Move
	symbols into new sections, and adjust values by output_offset.
	(setup_sections): Don't copy all sections, but instead point all
	text sections to .text, all data sections to .data, and all bss
	sections to .bss.
	(copy_sections): Adjust accordingly.

Thu Sep  2 12:34:03 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	Only build nlmconv if configured for a NetWare target.
	* configure.in: If we have some *-*-netware* target, or are using
	all targets, set BUILD_NLMCONV to $(NLMCONV_PROG) in Makefile.
	* Makefile.in (PROGS): Use $(BUILD_NLMCONV) rather than
	$(NLMCONV_PROG).

Tue Aug 31 14:13:35 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* objdump.c (ARCH_all): Define ARCH_hppa too.
	(dump_headers): Don't test for SEC_BALIGN if it's not defined by
	bfd.h.

Tue Aug 31 13:29:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* nlmconv.c (main): Force creation of .bss section.  Set up the
	sections before looking at the symbols.  Move all common symbols
	into .bss section.  Automatically define _edata and _end.  Only
	export symbols in the export list, with multiple prefixes if
	necessary.  Warn if no version.  Always create extended header.
	Set date automatically if not already set.
	(setup_sections): Count size of bss sections.
	(mangle_relocs, i386_mangle_relocs): Accept section argument, and
	take reloc_count as a changeable pointer; changed callers.
	(i386_mangle_relocs): Remove PC relative relocs within a section,
	as they require no adjustment.
	* nlmheader.y: Fixed memory allocation throughout: token STRING is
	now allocated on the heap, and freed if not needed.  Null
	terminated copyright message.  Accept version with only two
	strings.
	(symbol_list_opt): New nonterminal, either symbol_list or empty.
	(symbol_list): Use left recursion to avoid overflowing parser
	stack.
	(yylex): Rearranged beginning of line check.  Accept quoted
	strings using single quotes.  End generic argument at comment
	character or parentheses.
	(string_list_append): Fixed.
	(string_list_append1): New function.

	* bucomm.h: The first argument to xrealloc is PTR, not char *.
	* bucomm.c (xrealloc): Use PTR rather than char *.
	* Makefile.in (objdump.o): Depend upon config.status to notice
	--with-targets changes.
	(nlmconv.o): Depend upon bucomm.h.

Tue Aug 17 09:46:01 1993  David J. Mackenzie  (djm@thepub.cygnus.com)

	* configure.in: Don't pass cpu to config.bfd.

Thu Aug 12 16:43:04 1993  David J. Mackenzie  (djm@thepub.cygnus.com)

	* Makefile.in ($(NM_PROG)): Depend on demangle.o.
	(demangle.o): New target.
	(cplus-dem.o): Depend on it, to force compilation order when doing
	parallel compiles.

	* nm.c (print_symbol_info_{bsd,sysv,posix}): Take a bfd arg.
	(struct output_fns print_symbol_info): Ditto.
	(long_options, usage, main): Add -C --demangle option.
	(print_symname): New function, demangling if requested.
	(print_symbols, print_symbol_info_{bsd,sysv,posix}): Use it.

Wed Aug 11 22:57:23 1993  David J. Mackenzie  (djm@thepub.cygnus.com)

	* Makefile.in: Put CFLAGS last in compilation rules and omit from
	linking rules.  Use ARCHDEFS to compile objdump.c.
	Update dependencies.
	* configure.in: Construct ARCHDEFS based on the BFD target makefile
	fragments.
	* objdump.c: Conditionalize calls to the print_insn_ARCH functions
	according to ARCHDEFS.

Thu Aug 12 08:06:15 1993  Ian Lance Taylor  (ian@cygnus.com)

	* ar.c: Removed obsolete and non-functional GNU960 code.

Wed Aug 11 13:08:26 1993  Ian Lance Taylor  (ian@cygnus.com)

	* size.c (berkeley_sum): New function.
	(bsssize, datasize, textsize): New global variables.
	(bss_section_name, data_section_name, text_section_name): Removed.
	(print_berkeley_format): Map berkeley_sum over all the sections,
	rather than only reporting sizes of specifically named sections.
	* Makefile.in ($(OBJDUMP_PROG)): Removed dependency on size.o.

Tue Aug 10 10:46:01 1993  Ian Lance Taylor  (ian@cygnus.com)

	* nlmconv.c, nlmconv.h, nlmheader.y: New files for program to
	convert object files into NetWare Loadable Modules.
	* Makefile.in (NLMCONV_PROG): New macro, define to be nlmconv.
	(PROGS): Add NLMCONV_PROG.
	(nlmheader.c, nlmheader.o, nlmconv.o, $(NLMCONV_PROG)): New
	targets.

Thu Aug  5 15:48:32 1993  david d `zoo' zuhn  (zoo@rtl.cygnus.com)

	* Makefile.in: define MAKEOVERRIDES to an empty string

Wed Aug  4 17:08:08 1993  David J. Mackenzie  (djm@thepub.cygnus.com)

	* objcopy.c (copy_file): Make failures to process a file nonfatal.

Mon Aug  2 11:28:23 1993  David J. Mackenzie  (djm@thepub.cygnus.com)

	* nm.c: Add -B option, like --format=bsd.

Tue Jul 27 16:29:54 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* objcopy.c (copy_file): If the file is neither an object nor an
	archive, give an error rather than returning success.

Mon Jul 19 16:13:40 1993  Ken Raeburn  (raeburn@rtl.cygnus.com)

	* objdump.c (objdump_print_address): Prefer non-local symbols over
	local ones, and especially discriminate against debugging symbols.
	Also, for relocateable files, try to find a symbol in the current
	section, instead of picking one from some random section with a
	convenient value (read, section offset).
	(disassemble_data): Cast argument to malloc to size_t first.
	(dump_data): Likewise.
	(dump_relocs): If a single section name is specified, show relocs
	only for that section.  Otherwise, silently omit sections without
	relocs.  Format table nicely even if values are printed using 16
	digits instead of 8.

Fri Jul 16 15:19:59 1993  David J. Mackenzie  (djm@thepub.cygnus.com)

	* nm.c: Changes for final version of POSIX.2.
	(print_symbol_filename_{bsd,sysv,posix}): New functions.
	(formats): Add an element for a pointer to them.
	(print_symbols): Call it.
	(print_object_filename_posix, print_archive_member_posix): Produce
	output according to new POSIX.2 spec.

	* strings.c (print_strings): Handle STREAM being NULL.
	(strings_a_section): Pass a NULL.
	(main): Don't open /dev/null.

Thu Jul 15 12:44:09 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* objdump.c (disassemble_data): Handle the m88k.
	(display_bfd): Use bfd_errmsg, rather than just claiming that the
	bfd is not an object file.

Mon Jul 12 17:55:34 1993  K. Richard Pixley  (rich@cygnus.com)

	* Makefile.in (TAGS): make work again by naming directories
	  explicitly rather than depending on undefined macros.
	  (INSTALL_XFORM): correct bad install target.

Fri Jul  2 16:58:34 1993  David J. Mackenzie  (djm@thepub.cygnus.com)

	* strings.c: Doc fixes.

Sun Jun 27 13:35:24 1993  David J. Mackenzie  (djm@thepub.cygnus.com)

	* Makefile.in: Note dependencies on bucomm.h.
	(cplus-dem.o): Link c++filt with version.o.

	* strings.c: Include bucomm.h and add prototypes to other decls.
	Remove -h option.

	* bucomm.h: Declare xrealloc.

	* nm.c, objcopy.c, objdump.c, size.c, strings.c (main, usage): Add
	--help option.  Put "GNU" in the version message.
	(usage): Take stream and exit status as args.
	(main): Pass new args to usage.

Fri Jun 25 23:12:12 1993  David J. Mackenzie  (djm@thepub.cygnus.com)

	* strings.c, strings.1: New files.
	* binutils.texi: Document strings.
	* Makefile.in: Add rules for it.

Fri Jun 25 20:44:43 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)

	* objdump.c: Use size-independent bfd elf section names.

Sun Jun 20 23:09:06 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)

	* objdump.c (objdump_print_address): Handle wide offsets by
	calling sprintf_vma.

Fri Jun 18 14:29:12 1993  Per Bothner  (bothner@deneb.cygnus.com)

	* objdump.c (syms2):  Removed unused variable.
	* objdump.c (remove_useless_symbols):  New function.
	* objdump.c (comp):  Simplify.
	* objdump.c (dis-assemble_data):  Make simpler and more
	efficient how we filter out useless symbols:  Just filter
	BEFORE the sort (using remove_useless_symbols).
	* objdump.c (objdump_print_address):  Simplify.
	Change output syntax to match gdb.

Thu Jun 17 16:53:56 1993  david d `zoo' zuhn (zoo@cygnus.com)
	
	* Makefile.in: canonicalize install.sh; for use within
	this directory (and subdirs)

Mon Jun 14 12:13:22 1993  david d `zoo' zuhn  (zoo at rtl.cygnus.com)

	* Makefile.in (install, install-info): remove parentdir support,
	use INSTALL_XFORM; define INSTALL_XFORM

Thu Jun 10 17:29:21 1993  Per Bothner  (bothner@cygnus.com)

	* objcopy.c (copy_object):  Fix bad size passed to xmalloc().

Mon Jun  7 12:41:12 1993  Per Bothner  (bothner@rtl.cygnus.com)

	* Makefile.in (INCLUDES):  Add -I../bfd for sysdep.h and bfd.h.
	* configure.in:  No longer need to configure to get sysdep.h.
	* objcopy.c (copy_object):  Fix symbol table handling.

Fri Jun  4 17:20:03 1993  Per Bothner  (bothner@cygnus.com)

	* objcopy.c (filter_symbols):  Cannot filter the symbols
	in place, because that confuses the relocs, so take separate
	parameter for output array.
	* objcopy.c (sympp):  Make two variables: isympp and osympp.
	* objcopy.c (copy_object):  Allocate separate array (osympp)
	for filtered symbols.

Fri Jun  4 10:51:44 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

	* Makefile.in: change recursion test to presence of a configured
	testsuite directory

Thu Jun  3 14:05:57 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* Makefile.in (underscore.c): Hack the backquoted command so it
	doesn't cause Solaris make to bomb.

Thu Jun  3 10:40:19 1993  Jeffrey Osier  (jeffrey@cygnus.com)

	* Makefile.in:  added c++filt and objcopy to MANPAGES variable
	* .Sanitize:  keep c++filt.1 and objcopy.1

Thu Jun  3 00:32:52 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

	* Makefile.in: rename LOADLIBES to EXTRALIBS

Wed Jun  2 18:30:24 1993  Jeffrey Osier  (jeffrey@cygnus.com)

	* c++filt.1, objcopy.1:  new man pages

Fri May 28 15:01:24 1993  Per Bothner  (bothner@rtl.cygnus.com)

	* Makefile.in (install):  Also install ar and ranlib in
	$(tooldir)/bin;  needed for building libgcc.a.
	* objdump.c (objdump_print_address):  Fix the check
	"coincidental" label matches by dis-allowing undefined
	or com symbols.

Thu May 27 16:58:31 1993  Jeffrey Osier  (jeffrey@cygnus.com)

        * biutils.texi:  revised c++filt chapter

Wed May 26 17:24:17 1993  Ian Lance Taylor  (ian@cygnus.com)

	* Makefile.in (FLAGS_TO_PASS): Pass down CC and CFLAGS.

Tue May 25 00:26:47 1993  Ken Raeburn  (raeburn@cygnus.com)

	* objdump.c (slurp_symtab): Print warning for bad symbol table.
	(bfd_elf32_find_section, Elf32_Internal_Shdr): Updated
	declarations and uses.

	* Makefile.in (DISTSTUFF): Don't build binutils.mm.

Fri May 21 10:51:19 1993  David J. Mackenzie  (djm@rtl.cygnus.com)

	* nm.c: Add -f/--format, -P/--portability, -t/--radix options.
	Make global variables static.
	(main): Make -v like -n, not -V, and make -A like -o, for POSIX.2.
	(set_print_radix, set_output_format,
	print_{object_filename,archive_filename,archive_member,symbol_info}
	{bsd,sysv,posix}): New functions.
	(display_file, print_symbols): Call them.

	* ar.c: Improve error messages.

	* nm.c (main): Handle long options that just set a flag.

	* nm.c (main), ar.c (do_show_version), objcopy.c (main), size.c
	(main): Exit after printing the version number, per the GNU coding
	standards.

Mon May 17 13:20:25 1993  Per Bothner  (bothner@cygnus.com)

	* README, Makefile.in:  Minor updates for 2.2.

Fri May 14 11:12:26 1993  Per Bothner  (bothner@cygnus.com)

	* Makefile.in (underscore.c):  Automatically generate
	(using nm) a file with the variable prepends_underscore.
	* Makefile.in (c++filt):  Link underscore.o with cplus-dem.o
	so that initial underscores get removed iff appropriate.
	* binutils.texi:  Preliminary documentation for c++filt.
	* Makefile.in, binutils.texi:  Set to version 2.2.

	* NEWS:  Mention copy->objcopy renaming and new c++filt program.

Wed May 12 12:05:36 1993  Ian Lance Taylor  (ian@cygnus.com)

	* Makefile.in (cplus-dem.o, $(DEMANGLER_PROG)): Build the
	demangler via cplus-dem.o, rather than directly from the .c file.

	* objcopy.c: Renamed from copy.c, updated comments accordingly.
	* Makefile.in, binutils.texi: Renamed copy to objcopy.
	* is-strip.c, maybe-strip.c, not-strip.c: Updated comments for
	rename of copy to objcopy.

Mon May 10 17:20:18 1993  Per Bothner  (bothner@cygnus.com)

	* binutils.texi (strip, -v option):  Fix typo.

Fri May  7 13:57:50 1993  Ian Lance Taylor  (ian@cygnus.com)

	* Makefile.in (RUNTEST): Define.
	(FLAGS_TO_PASS): Pass down RUNTEST.

Tue May  4 10:06:50 1993  Ian Lance Taylor  (ian@cygnus.com)

	* Makefile.in (DEMANGLER_PROG): Name it c++filt.
	(PROG): Also build and install COPY_PROG.

Mon May  3 19:11:48 1993  Per Bothner  (bothner@cygnus.com)

	* Makefile.in:  Change definition of $(tooldir) to match FSF.

Wed Apr 28 23:41:32 1993  David J. Mackenzie  (djm@rtl.cygnus.com)

	* size.c (usage): Add missing options.
	(main): Clean up option parser.

	* objdump.c (usage): Add missing options.
	(display_file): Print program name before calling
	bdf_perror. 

	* nm.c (usage): Add missing options.
	(main): Clean up option parser.
	(display_file): Print program name before calling
	bdf_perror. 

	* copy.c (copy_usage, strip_usage): Add missing options.

	* ar.c (usage): New function.
	(main): Call it.
	(open_inarch, do_quick_append): Print program name before calling
	bdf_perror. 

Thu Apr 22 15:01:35 1993  Ian Lance Taylor  (ian@cygnus.com)

	* nm.c (main): Accept and ignore -A and -B for MIPS compatibility.

Mon Apr 19 14:06:59 1993  Rob Savoye  (rob@cygnus.com)

	* Makefile.in: Added FLAGS_TO_PASS so tests get run on freshly
	built binaries if they exist. (otherwise the path)

Wed Apr  7 22:22:50 1993  Rob Savoye  (rob@cygnus.com)

	* Makefile.in: Changed check target to use DejaGnu.

Thu Apr  1 12:37:13 1993  Jim Kingdon  (kingdon@cygnus.com)

	* Makefile.in: Remove am29k-pinsn.c, i960-pinsn.c.
	objdump.c: a29k and i960 are `disassemble' not `print'.

	* objdump.c: Rename print_address to objdump_print_address
	and change parameters.
	(disassemble_data): Use objdump_print_address.

Wed Mar 31 10:25:29 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* objdump.c (disassemble_data): print_insn_sparc is now a
	`disassemble' not a `print'.
	Makefile.in: Remove sparc-pinsn.c (now in libopcodes.a).

	* objdump.c (disassemble_data): Use new read_memory_func stuff.

Thu Mar 25 10:38:11 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* objdump.c (fprintf): Declaration of variadic function had better
	be a prototype for ANSI C systems.

Mon Mar 22 23:19:46 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

	* Makefile.in: rename test-install to install-check

Fri Mar 19 14:40:08 1993  Steve Chamberlain  (sac@thepub.cygnus.com)

	* objdump.c (disassemble_data): Add H8500.

Fri Mar 19 10:56:51 1993  Jim Kingdon  (kingdon@cygnus.com)

	* objdump.c (usage): Mention long options.

Thu Mar 18 14:22:17 1993  Per Bothner  (bothner@rtl.cygnus.com)

	* nm.c:  Modify behavior of -o flag for archives to match
	BSD4.4 and Sunos 4:  Prefix archive name before each line.

	* m68k-pinsn.c:  Removed.  Subsumed by ../opcodes/m68k-dis.c.
	* i386-pinsn.c:  Removed.  Subsumed by ../opcodes/i386-dis.c.
	* Makefile.in:  Adjust accordingly.
	* objdump.c:  Support new-style disassemblers (ones that use
	the interface of ../include/dis-asm.h).

Thu Feb 25 15:57:00 1993  Per Bothner  (bothner@rtl.cygnus.com)

	* Makefile.in:  When making tar file, remove texinfo/*,
	except for texinfo/texinfo.tex.
	* ardup.c:  Add extern declaration of strdup.
	* Makefile.in (testsuite):  Add 'else true' since otherwise
	Ultrix /bin/sh complains.

Wed Feb 24 19:44:18 1993  Per Bothner  (bothner@rtl.cygnus.com)

	* Makefile.in:  Set VERSION to 2.1.
	* README, NEWS: Updates.
	* nm.c:  Add -v as a synonym for -V.

Tue Feb 23 19:00:50 1993  Mike Werner  (mtw@poseidon.cygnus.com)

	* configure.in: added testsuite to configdirs.
	* Makefile.in: added support for building testsuite.

Mon Feb 22 22:52:10 1993  Per Bothner  (bothner@rtl.cygnus.com)

	* objdump.c (disassemble_data):  Print function names when
	given by bfd_find_nearest_line.  If not - still print
	line numbers.

Mon Feb 22 07:54:03 1993  Mike Werner  (mtw@poseidon.cygnus.com)

	* binutils/testsuite: made modifications to testcases, etc., to allow
        them to work properly  given the reorganization of deja-gnu and the
	relocation of the testcases from deja-gnu to a "tool" subdirectory.

Mon Feb 22 10:27:24 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* objdump.c (dump_data): Free up section contents each time
	through the loop.  Reported by minyard@bnr.ca.

Sun Feb 21 10:55:55 1993  Mike Werner  (mtw@poseidon.cygnus.com)

	* binutils/testsuite: Initial creation of binutils/testsuite.
	Migrated dejagnu testcases and support files for testing nm to
	binutils/testsuite from deja-gnu.  These files were moved "as is"
	with no modifications.	This migration is part of a major overhaul
	of dejagnu.  The modifications to these testcases, etc., which
	will allow them to work with the new version of dejagnu will be
	made in a future update.

Fri Feb 12 10:05:20 1993  Fred Fish  (fnf@cygnus.com)

	* Makefile.in (LIBIBERTY_SRC_DIR, LIBIBERTY_BIN_DIR): New macros.
	* Makefile.in (LIBIBERTY):  Use LIBIBERTY_BIN_DIR.
	* Makefile.in (DEMANGLER_PROG):  New program to build.  Add macro
	and rule.
	* Makefile.in (PROGS):  Add DEMANGLER_PROG.

Tue Jan 26 11:56:33 1993  Ian Lance Taylor  (ian@cygnus.com)

	* copy.c, nm.c, objdump.c, size.c: Use new bfd_is_com_section
	macro rather than checking for equality to bfd_com_section.

Fri Jan  8 15:50:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* objdump.c (disassemble_data): Fix code to find first useless
	symbol.

Thu Jan  7 13:13:31 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* objdump.c (disassemble_data): Use mips_print_insn for MIPS.
	Don't core dump if bfd_find_nearest_line returns false.

Wed Jan  6 17:14:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)

	* objdump.c (disassemble_data): know how to disassemble z8000s
	too.

Wed Jan  6 15:16:27 1993  Per Bothner  (bothner@cygnus.com)

	* arsup.h (interactive), bucomm.h (program_name):  Prefix
	with 'extern', to avoid warnings from some compilers.

Wed Jan  6 15:14:11 1993  Per Bothner  (bothner@rtl.cygnus.com)

	* arparse.y: fix unnecessary shift/reduce

Tue Dec 22 15:46:56 1992  Per Bothner  (bothner@rtl.cygnus.com)

	* Makefile.in:  Make check depend on all.
	* Makefile.in (distclean): Remove sysdep.h.
	* size.c:  Use %u format where appropriate.
	* objdump.c:  Standardize:  L_SET -> SEEK_SET.
	* objdump.c:  Use new macro bfd_asymbol_bfd.
	* configure.in:  Allow std-host as the default ${mys_host}.

Thu Dec 17 19:38:19 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

	* Makefile.in: added dvi target, define and use TEXI2DVI

Tue Dec 15 18:05:07 1992  Per Bothner  (bothner@cygnus.com)

	* Makefile.in (dist):  Fix permissions before release.
	* size.c:  Use bfd_size_type (and long) where appropriate.
	* ar.c:  Make writing a map the default, to be compatible
	with SYSV and Posix.2.  Remove some bogus kludges that
	handled __.SYMDEF directly.
	* NEWS:  New file.

Mon Nov  9 13:36:53 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

	* Makefile.in: flex no longer needs the -S flag

Sat Nov  7 15:06:13 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * ar.c (extract_file): utime needs a pointer to a utimbuf

	* Makefile.in: handle -I includes better, adding $(BASEDIR)/bfd to
	the list (since some of the bfd/hosts/*.h files include other
	files from that directory)

Fri Nov  6 00:12:51 1992  John Gilmore  (gnu@cygnus.com)

	* i960-pinsn.c (MEM_MAX, MEM_SIZ):  Set upper bound properly.

Thu Nov  5 03:37:15 1992  John Gilmore  (gnu@cygnus.com)

	Clean up some old BFD ansification macros.

	* arsup.h, bucomm.h, objdump.h:  Remove EXFUN from binutils.
	It still remains as a local macro in gmalloc.c, which is derived
	from some other copy of GNU Malloc somewhere (FIXME).

	* ar.c, objdump.c, size.c:  Replace EXFUN with PROTO.  Make static
	fns really static.
	* arsup.h:  Declare extract_files.

Mon Nov  2 12:42:11 1992  Ian Lance Taylor  (ian@cygnus.com)

	* ar.c (extract_file): instead of checking USG: if POSIX_UTIME,
	use utime and utimbuf structure, otherwise if USE_UTIME use utime
	and array of two longs, otherwise use utimes.

Thu Oct 15 13:57:35 1992  Per Bothner  (bothner@cygnus.com)

	* binutils.tex:  Document yesterday's changes to strip and copy.

Wed Oct 14 13:22:14 1992  Per Bothner  (bothner@cygnus.com)

	* copy.c:  Re-do command-line parsing to use getopt_long().
	Add long option names.  Re-think option letters to be more
	consistent.
	* copy.c:  New function filter_symbols() for stripping only
	debug-symbols and/or local symbols.  Use these to support
	the previously-missing options of the old FSF strip.

Tue Oct 13 01:24:20 1992  John Gilmore  (gnu@cygnus.com)

	* configure.in (host):  Use ${srcdir}/../bfd/configure.host rather
	than repeating a copy of it here.

Wed Oct  7 12:53:52 1992  Ken Raeburn  (raeburn@cygnus.com)

	* copy.c (main): Even if is_strip, accept -d argument indicating
	alternate output format.  Needed by gdb for Nindy.

	* m68k-pinsn.c (print_insn_arg): Handle new "`" operand type.

Tue Oct  6 16:33:56 1992  Jeffrey Osier  (jeffrey@cygnus.com)

	* binutils.texi:  added documentation for "copy"

Tue Oct  6 14:22:56 1992  Per Bothner  (bothner at PersSony)

	* Makefile.in (*clean rules): Some cleaning up.
	* Makefile.in (dist): Make diststuff in gprof for a dist.

	* ar.c (do_show_version):  New function.
	* ar.c (main):  Fix so "ar -V" works.

Thu Oct  1 22:44:45 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

	* configure.in: now uses the cpu-vendor-os triple instead of
	nested cases.

Fri Sep 25 22:41:08 1992  John Gilmore  (gnu@cygnus.com)

	* i960-pinsn.c:  Change bzero to memset.
	* sparc-pinsn.c:  Change index to strchr.

Mon Sep 21 14:39:56 1992  Ian Lance Taylor  (ian@cygnus.com)

	* m68k-pinsn (print_insn_arg, fetch_arg): added support for
	operands to memory management instructions, from WRS.

Tue Sep 15 15:26:38 1992  Ian Lance Taylor  (ian@cygnus.com)

	* Makefile.in (install): if $(tooldir) exists, install nm and
	strip in $(tooldir)/bin.

Thu Sep  3 11:57:40 1992  Per Bothner  (bothner@rtl.cygnus.com)

	* Makefile.in:  Let's call it version 2.0.

Wed Sep  2 00:25:13 1992  Per Bothner  (bothner@rtl.cygnus.com)

	* Makefile.in:  Bump to version 0.98.
	* TODO, README:  Minor updates.

	* Makefile.in:  Added mostlyclean, distclean rules,
	and cleaned up clean, realclean.

Sun Aug 30 21:18:59 1992  Ian Lance Taylor  (ian@cygnus.com)

	* Makefile.in: map program names through program_transform_name
	when installing.

Sun Aug 30 18:09:03 1992  Per Bothner  (bothner@rtl.cygnus.com)

	* Makefile.in:  Bump to versions 1.97.90.
	* cplus-dem.c:  Removed.  Was nowhere used - and if some
	programs are changed to to demangling should now use the
	versions in libiberty.

Thu Aug 27 12:58:09 1992  Brendan Kehoe  (brendan@cygnus.com)

	* configure.in: add we32k

Mon Aug 24 14:53:42 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	* ar.c (map_over_members): if the element of the archive has a
	null name, fill it in.

	* nm.c (do_one_rel_file): only warn if a bfd's flags say there
	will be symbols and there aren't any.

Wed Aug 19 11:20:25 1992  Ian Lance Taylor  (ian@cygnus.com)

	* m68k-pinsn.c: handle new operand type 'r', introduced for cas2.

Tue Aug 18 20:45:48 1992  Rob Savoye  (rob@cygnus.com)

	* nm.c objdump.c: Added support for a +version (-V)
	to print the version number.

	* ar.c, copy.c: Added support for a -V option to print
	the version number.

Tue Aug 18 13:28:44 1992  Ian Lance Taylor  (ian@cygnus.com)

	* config/mh-apollo68v: removed -g from CC definition.

	* Makefile.in: always create installation directories.

Mon Aug 17 18:33:41 1992  Per Bothner  (bothner@rtl.cygnus.com)

	* m68k-pinsn.c:  Minor fix in style of output (don't use
	range to indicate floating point control registers).

Tue Aug 11 23:42:21 1992  Per Bothner  (bothner@cygnus.com)

	* ar.c (main):  Don't *always* set the verbose flag!

Wed Aug  5 11:25:27 1992  Per Bothner  (bothner@rtl.cygnus.com)

	* copy.c:  When is_strip (because it is invoked as the strip
	program), follow traditional argv processing:
	'strip file1 file2' now strips file1 and file2, rather
	than stripping file1 (as input), leaving output in file2.

Mon Jul 27 16:28:08 1992  Per Bothner  (bothner@rtl.cygnus.com)

	* objdump.c (display_info, display_info_table):  Call
	bfd_set_format() on dummy bfd before using it (twice).
	* ar.c:  Make sure archive is created on command 'r'
	even when no elements are inserted.  (Clean up and
	simplify some non-working related code.)

Mon Jul 20 02:48:38 1992  D. V. Henkel-Wallace  (gumby@cygnus.com)

	* configure.in: hppa support doesn't assume hp OS (from sef).

Sat Jul 18 14:35:22 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

	* configure.in: recognize hppa hosts (bsd & hpux), error messages
	to stderr, not stdout

Fri Jul 17 18:39:44 1992  K. Richard Pixley  (rich@rtl.cygnus.com)

	* ar.1, binutils.texi, i960-pinsn.c, nm.1, objdump.1, ranlib.1,
	  size.1, sparc-pinsn.c, strip.1: removed rcsid's.

Thu Jul 16 16:55:24 1992  K. Richard Pixley  (rich@rtl.cygnus.com)

	* Makefile.dos: removed rcsid.

Thu Jul 16 08:23:07 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	* objdump.c (display_bfd): print state of BFD_IS_RELAXABLE too

Tue Jun 30 20:26:15 1992  D. V. Henkel-Wallace  (gumby@cygnus.com)

	* Makefile.in: Add program_suffix (parallel to program_prefix)

Thu Jun 25 04:52:45 1992  John Gilmore  (gnu at cygnus.com)

	* nm.c (sorters):  Lint.  Remove excess whitespace.

Wed Jun 24 13:48:07 1992  Per Bothner  (bothner@cygnus.com)

	* nm.c (valueof macro):  Add missing parentheses.
	(Their lack screwed up numeric_forward().)

Sun Jun 14 10:33:27 1992  John Gilmore  (gnu at cygnus.com)

	* objdump.c (dump_elf_stabs):  Also dump .stab.index and
	.stab.excl sections.
	(dump_elf_stabs_1):  Split out main body of old dump_elf_stabs.
	* objdump.1, binutils.texi:  Document new sections dumped.

Fri Jun 12 22:23:35 1992  John Gilmore  (gnu at cygnus.com)

	* size.c, objdump.c, bucomm.c:  Lint.

Thu Jun 11 01:19:06 1992  John Gilmore  (gnu at cygnus.com)

	* objdump.c (dump_elf_stabs): New feature: --stabs prints out a
	.stab section from an ELF file.  Installed under #ifdef
	ELF_STAB_DISPLAY so it can be easily disabled, since it requires
	bfd-internals header files and such.
	* objdump.1, binutils.texi:  Update for --stabs.  Also fix
	objdump's doc to use -- rather than + for long options.
	(FIXME:  Not yet fixed everywhere in binutils.texinfo.)

Wed Jun 10 07:53:24 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	* objdump.c(display_info), patches from
	mohring@informatik.tu-muenchen.de to print the table much more
	nicely.

Thu May 28 13:36:16 1992  Per Bothner  (bothner@rtl.cygnus.com)

	* objdump.c:  Add another enum->int cast, for the sake of
	old compilers (such as PCC).

Wed May 27 13:01:44 1992  Per Bothner  (bothner@rtl.cygnus.com)

	* arlex.l:  Don't include <sysdep.h> (unneeded conflicts).
	Add declaration of strdup().

Fri May 22 13:40:37 1992  Per Bothner  (bothner@cygnus.com)

	* Makefile.in:  Use srcdir instead of VPATH in ldgram/ldlex
	rules, since these are used when building a distribution.
	* Makefile.in (arlex.c):  Don't re-direct output, since that
	leaves a bogus output files if it fails.

	* arlex.l:  Make work with lex, for what it's worth.
	* Makefile.in:  Better lex support.
	* Makefile.in (dist):  Generate flex and bison outputs
	for distribution.

Thu May 14 17:17:59 1992  K. Richard Pixley  (rich@rtl.cygnus.com)

	* Makefile.in: get BISON definition right.

Fri May  8 07:47:08 1992  K. Richard Pixley  (rich@cygnus.com)

	* sanity.sh: default TMPDIR to ".".

Thu May  7 12:34:50 1992  Roland H. Pesch  (pesch@fowanton.cygnus.com)

	* binutils.texi: add doc for ar command language.

Wed May  6 18:05:36 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	* arparse.y: make END call ar_end
	* arsup.c (ar_end): added, deletes temp file if archive session
	aborted.


Wed May  6 11:08:53 1992  K. Richard Pixley  (rich@rtl.cygnus.com)

	* Makefile.in: use bison & flex from ../ if they exist.  Also,
	  FLEX->LEX.

	* sanity.sh: remove temporary directory when finished.

Tue May  5 12:00:58 1992  Per Bothner  (bothner@rtl.cygnus.com)

	* Makefile.in:  Bump to version 1.97.
	* ar.c:  Declare errno for machines that need it.

Mon May  4 23:29:51 1992  John Gilmore  (gnu@cygnus.com)

	* objdump.c (display_info):  Handle error cases without coredump.
	Close the dummy temporary file we open in the loop.
	* Makefile.in (arsup.o):  Add kludge to build with Sun Make.

Fri May  1 16:20:23 1992  K. Richard Pixley  (rich@cygnus.com)

	* Makefile.in: added test-install target.

	* sanity.sh: new file.

	* Makefile.in: use sanity test on make check.

Tue Apr 21 13:38:37 1992  K. Richard Pixley  (rich@cygnus.com)

	* Makefile.in: rework CFLAGS so that they can be passed on the
	  command line to make.  Remove MINUS_G.  Default CFLAGS to -g.

Wed Apr 15 14:33:07 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	* arsup.c, arsup.h, arparse.y, arlex.l: support for archive
	scripting language.

Fri Mar  6 21:54:53 1992  K. Richard Pixley  (rich@cygnus.com)

	* Makefile.in: added check target.

Thu Mar  5 21:35:49 1992  K. Richard Pixley  (rich@cygnus.com)

	* Makefile.in: added clean-info target.

Tue Mar  3 15:36:37 1992  K. Richard Pixley  (rich@rtl.cygnus.com)

	* Makefile.in: remove $(COPY_PROG) from PROGS.  It shouldn't be
	  installed. added tooldir and program_prefix.

Wed Feb 26 18:04:40 1992  K. Richard Pixley  (rich@cygnus.com)

	* Makefile.in, configure.in: removed traces of namesubdir,
	  -subdirs, $(subdir), $(unsubdir), some rcs triggers.  Forced
	  copyrights to '92, changed some from Cygnus to FSF.

Sun Feb 16 12:53:02 1992  Per Bothner  (bothner at cygnus.com)

	* Makefile.in:  Bump version to 1.96, and remove -beta
	suffix from distribution name.
	* m68k-pinsn.c:  New macro COERCE_SIGNED_CHAR to extract
	the signed value of a character (even if chars are unsigned).
	* sparc-pinsn.c:  Add new operand types.

Thu Feb  6 12:14:19 1992  Steve Chamberlain  (sac at rtl.cygnus.com)

	* objdump.c (disassemble_data): don't print a section's contents
	if it's not loadable (eg bss)

Tue Jan 28 11:11:06 1992  Steve Chamberlain  (sac at rtl.cygnus.com)

	* m68k-pinsn.c (print_insn_arg): fixed so that -ve branch
	displacements don't get printed as large +ve ones.

Fri Jan 24 14:47:53 1992  Steve Chamberlain  (sac at rtl.cygnus.com)

	* copy.c, nm.c, objdump.c, size.c : changed to use the
	new reloc scheme.


Mon Dec 30 18:34:41 1991  Per Bothner  (bothner at cygnus.com)

	* bucomm.c (print_arelt_descr):  Tweek the output format
	so that 'ar tv' output follows Posix 1003.2/D11.
	Output is now also identical to Sun's (except __.SYMDEF).

Mon Dec 30 06:09:53 1991  John Gilmore  (gnu at cygnus.com)

	* Makefile.in:  Make `make' output more readable.

Wed Dec 18 15:04:45 1991  Per Bothner  (bothner at cygnus.com)

	* Makefile.in:  Bump to version 1.94.

Wed Dec 11 16:48:09 1991  Steve Chamberlain  (sac at cygnus.com)

	* ar.c: added "b" to fopens for dos
	* configdj.bat, makefile.dos new files from DJ

Tue Dec 10 04:07:26 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

	* Makefile.in: infodir belongs in datadir.

Sat Dec  7 17:09:37 1991  Steve Chamberlain  (sac at rtl.cygnus.com)

	* bucomm.h: created to hold prototypes of bucomm.c
	* objdump.h: created to hold prototyes of objdump.c
	* am29k-pinsn.c: include objdump.h
	* ar.c: include bucomm.h, get ar.h from the right place and
	include libbfd.h
	* bucomm.c: defunize bfd_fatal
	* copy.c: include bucomm.h, lint.
	* i960-pinsn.h: include bucomm.h
	* m68k-pinsn.h: lint
	* nm.c: include bucomm.h, lint
	* objdump.c: lint
	* sparc-pinsn.c: include objdump.h

	

Fri Dec  6 23:02:14 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

	* Makefile.in: added standards.text support.  install using
	  INSTALL_PROGRAM and INSTALL_DATA.

	* configure.in: configure now does all of it's work from objdir so
	  make file existence tests against ${srcdir}.

Thu Dec  5 22:46:22 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

	* Makefile.in: idestdir and ddestdir go away.  Added copyrights
	  and shift gpl to v2.  Added ChangeLog if it didn't exist. docdir
	  and mandir now keyed off datadir by default.

Wed Dec  4 22:42:03 1991  Per Bothner  (bothner at cygnus.com)

	* Makefile.in:  Bump to version 1.93.
	* Makefile.in:  Add make-strip.o:maybe-strip.c dependency
	for make versions that provide half-baked VPATH-support (e.g. Sun's).
	* size.c:  Improvements suggested by
	"david d [zoo] zuhn" <zoo@aps1.spa.umn.edu>:
	- Don't emit (Berkeley) headers if no files were found.
	- Return a non-zero return code on failure.

Sat Nov 30 21:34:19 1991  Steve Chamberlain  (sac at rtl.cygnus.com)

	Changes due to include file renaming:
	* am29k-pinsn.c: a29k-opcode.h	-> opcode/a29k.h
	* sparc-pinsn.c: sparc-opcode.h	-> opcode/sparc.h
	* m68k-pinsn.c:	 m68k-opcode.h	-> opcode/m68k.h
	* nm.c:		 stab.gnu.h	-> aout/stab_gnu.h

Tue Nov 19 19:20:43 1991  Per Bothner  (bothner at cygnus.com)

	* README:  Mention MINIMIZE flag for bfd's make.

Mon Nov 18 12:05:37 1991  Per Bothner  (bothner at cygnus.com)

	* README:  Various improvements.

Sun Nov 17 23:40:59 1991  Per Bothner  (bothner at cygnus.com)

	* Makefile.in:  Bump to version 1.92.
	* version.c, Makefile.in:  Get version string from Makefile.
	* copy.c, is-strip.c, not-strip.c, maybe-strip.c, Makefile.in:
	Make the same change that we earlier did for ar/ranlib:
	Generate two different binaries for strip and copy and use
	a global variable with different values to distinguish
	ostrip from copy.  (-1 means to use argv[0] to decide,
	so you can get the old behavior, but it is no longer the default).
	* copy.c (copy_file):  Set EXEC_P of output bfd if input is so.
	* copy.c (main):  If is_strip==-1, compare last 5 chars
	of argv[0], not the whole path.
	* copy.c (main): Return 0, not 1.
	* copy.c (setup_sections):  Fix due to change in bfd_make_section
	now failing if asked for a duplicate section.
	* strip.c, ostrip.c:  Removed obsolete files.
	* ar.c, not-ranlib.c, maybe-ranlib.c:
	Change encoding of is_ranlib variable to be consistent
	with is_strip for strip.copy (i.e -1 to means use argv[0]).

Thu Nov 14 20:11:02 1991  Per Bothner  (bothner at cygnus.com)

	* version.c (program_version): Update to version 1.92.

Tue Nov 12 16:17:53 1991  Per Bothner  (bothner at cygnus.com)

	* ar.c (get_pos_bfd):  Previous fix was missing a "break".

Thu Nov  7 08:55:56 1991  Steve Chamberlain  (sac at cygnus.com)

	* am29k-pinsn.c: Fixed bug in mtacc, dmac and fmac instruction
	encodings. (Thaks to David Wood)

Sun Nov  3 14:50:23 1991  Per Bothner  (bothner at cygnus.com)

	* Makefile.in ($(DIST_NAME).tar.Z), TODO:  Various fixes.
	* ar.c (get_pos_bfd): Fix to handling of before/after
	positioning options.
	* bucomm.c (fatal):  MISSING_VFPRINTF is no longer an issue,
	since libiberty contains vfprintf etc if otherwise missing.
	* m68k-pinsn.c (print_insn_arg):  Support BB/BW/BL
	type operands, as used by branch instructions.
	* nm.c:  Delegate printing of symbols to BFD,
	by using bfd_print_symbol to do the formatting.

Mon Oct 28 11:20:47 1991  Steve Chamberlain  (steve at cygnus.com)

	* ar.c (write_archive.c): added unlink before rename since some
	systems can't rename onto an existant file.

Mon Oct 21 09:47:23 1991  Steve Chamberlain  (steve at rtl.cygnus.com)

	* nm.c: now doesn't crash if a symbol with no section and no
	SEC_ABS appears.

Thu Oct 17 15:25:50 1991  Per Bothner  (bothner at cygnus.com)

	* Makefile.in, version.c:  Bump to version 1.91.

Wed Oct 16 11:45:36 1991  Per Bothner  (bothner at cygnus.com)

	* Makefile.in, ar.c, bucomm.c, copy.c, cplus-dem.c, filemode.c,
	i960-pinsn.c, m68k-pinsn.c, nm.c, objdump.c, size.c, sparc-pinsn.c,
	* strip.c: Add or update Copyright notice.
	* TODO:  Add note on 'nm -a'.	
	* version.c: Update version number to 1.90.
	* Makefile.in: Fix making of documentation for dist.

Tue Oct 15 00:17:17 1991  Per Bothner  (bothner at cygnus.com)

	* README: New file.
	* Makefile.in: New kludgy rules for making a tarfile.
	* Makefile.in: Fix bindir path.

Mon Oct 14 17:34:29 1991  Roland H. Pesch  (pesch at cygnus.com)

	* Makefile.in: add targets binutils.mm, binutils.me

Fri Oct 11 22:44:21 1991  John Gilmore  (gnu at cygnus.com)

	* Makefile.in:  Avoid Sun Make VPATH bugs by adding dependencies.

Fri Oct 11 12:51:33 1991  Roland H. Pesch  (pesch at cygnus.com)

	* Makefile.in: add target "binutils.ms"

	* binutils.texinfo: minor restructuring for texi2roff comfort.

Fri Oct 11 04:12:28 1991  John Gilmore  (gnu at cygnus.com)

	Restructure configuration scheme for bfd, binutils, ld.

	* include/sys/h-*.h:  Move to bfd/hosts/h-*.h.
	* configure.in:  Revise to symlink sysdep.h to ../bfd/hosts/h-xxx.h.
	Change some config names to match other dirs.
	* *.c:  Include bfd.h before sysdep.h, so ansidecl and PROTO()
	get defined first.
	* Makefile.in:  Use -I. to get sysdep.h.

Wed Oct  9 22:42:56 1991  Per Bothner  (bothner at cygnus.com)

	* nm.c (print_symbols):  Handle NULL name field of symbol.
	* Makefile.in: Removed spurious comment.

Tue Oct  8 16:55:03 1991  Roland H. Pesch  (pesch at cygnus.com)

	* binutils.texinfo: minor typos, phrasing, formatting fixes.

Tue Oct  8 15:13:20 1991  Per Bothner  (bothner at cygnus.com)

	* configure.in: Get host file from ../bfd/config, not config.
	* config/*: Remove config directory and its files.

Tue Oct  8 13:58:59 1991  Roland H. Pesch  (pesch at cygnus.com)

	* Makefile.in: new targets binutils.dvi, binutils.info

	* binutils.texinfo: remove most remaining FIXME's, delete
	references to __.SYMDEF by name


Tue Oct  8 10:23:44 1991  Steve Chamberlain  (steve at cygnus.com)

	* objdump.c (print_address) Print addresses nicely.

Mon Oct  7 11:31:05 1991  Per Bothner  (bothner at cygnus.com)

	* ar.c, Makefile.in, new files {is,not,maybe}-ranlib.c:
	Make two different binaries for ar and ranlib, instead of
	distinguishing them at run time using argv[0].
	(Old behavior is still available if you "make ar_with_ranlib",
	but it is not the default.)
	* ranlib.sh (new):  An alternative one-line
	shell implementation of ranlib.

Fri Oct  4 21:49:44 1991  John Gilmore  (gnu at cygnus.com)

	* objdump.c:  Cope with renames of a few BFD types & enums.

Fri Oct  4 19:08:09 1991  Roland H. Pesch  (pesch at cygnus.com)

	* binutils.texinfo: add new file (rudimentary docn)

Mon Sep 30 12:30:39 1991  Per Bothner  (bothner at cygnus.com)

	* config/hmake-news: Add new file (for Sony NEWSOS3).
	* bucomm.c (fatal):  Conditionally compile fatal() depending on
	MISSING_VFPRINTF, and don't confuse the issue with NO_VARARGS.
	* objdump.c (dump_headers):  Trivial output format change.
	* objdump.c (display_info): Loop over integers, not enums,
	to appease old compilers.

Mon May 20 16:14:07 1991  Steve Chamberlain  (steve at cygint.cygnus.com)

        *objdump.c *nm.c *copy.c :hanged some types to work with 64 bit object files

Thu May 16 16:06:55 1991  Steve Chamberlain  (steve at cygint.cygnus.com)
     from bother
	* objdump.c (print_address): Make disasembled output more
	consistent with gdb and as: Add 0x when printing hex.
	Don't print extra leading zeros.
	Attempt to not print "filename.o".
	* objdump.c: Add some enum-to-int casts to accomodate old compilers.


Fri May  3 22:21:44 1991  John Gilmore  (gnu at cygint.cygnus.com)

	* copy.c:  Change =& constructs to = &, since they confuse older
	C compilers.


Local Variables:
version-control: never
End: