binutils-gdb/gas/doc/c-arm.texi

706 lines
21 KiB
Plaintext
Raw Normal View History

2005-03-03 02:29:54 +01:00
@c Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
2001-03-09 00:24:26 +01:00
@c Free Software Foundation, Inc.
1999-05-03 09:29:11 +02:00
@c This is part of the GAS manual.
@c For copying conditions, see the file as.texinfo.
@ifset GENERIC
@page
@node ARM-Dependent
@chapter ARM Dependent Features
@end ifset
@ifclear GENERIC
@node Machine Dependencies
@chapter ARM Dependent Features
@end ifclear
@cindex ARM support
@cindex Thumb support
@menu
* ARM Options:: Options
* ARM Syntax:: Syntax
* ARM Floating Point:: Floating Point
* ARM Directives:: ARM Machine Directives
* ARM Opcodes:: Opcodes
* ARM Mapping Symbols:: Mapping Symbols
1999-05-03 09:29:11 +02:00
@end menu
@node ARM Options
@section Options
@cindex ARM options (none)
@cindex options for ARM (none)
1999-05-03 09:29:11 +02:00
@table @code
@cindex @code{-mcpu=} command line option, ARM
@item -mcpu=@var{processor}[+@var{extension}@dots{}]
1999-05-03 09:29:11 +02:00
This option specifies the target processor. The assembler will issue an
error message if an attempt is made to assemble an instruction which
will not execute on the target processor. The following processor names are
recognized:
@code{arm1},
@code{arm2},
@code{arm250},
@code{arm3},
@code{arm6},
@code{arm60},
@code{arm600},
@code{arm610},
@code{arm620},
@code{arm7},
@code{arm7m},
@code{arm7d},
@code{arm7dm},
@code{arm7di},
@code{arm7dmi},
@code{arm70},
@code{arm700},
@code{arm700i},
@code{arm710},
@code{arm710t},
@code{arm720},
@code{arm720t},
@code{arm740t},
@code{arm710c},
@code{arm7100},
@code{arm7500},
@code{arm7500fe},
@code{arm7t},
@code{arm7tdmi},
@code{arm7tdmi-s},
@code{arm8},
@code{arm810},
@code{strongarm},
@code{strongarm1},
@code{strongarm110},
@code{strongarm1100},
@code{strongarm1110},
@code{arm9},
@code{arm920},
@code{arm920t},
@code{arm922t},
@code{arm940t},
@code{arm9tdmi},
@code{arm9e},
@code{arm926e},
@code{arm926ej-s},
@code{arm946e-r0},
@code{arm946e},
@code{arm946e-s},
@code{arm966e-r0},
@code{arm966e},
@code{arm966e-s},
@code{arm968e-s},
@code{arm10t},
@code{arm10tdmi},
@code{arm10e},
@code{arm1020},
@code{arm1020t},
@code{arm1020e},
@code{arm1022e},
@code{arm1026ej-s},
@code{arm1136j-s},
@code{arm1136jf-s},
@code{arm1156t2-s},
@code{arm1156t2f-s},
@code{arm1176jz-s},
@code{arm1176jzf-s},
@code{mpcore},
@code{mpcorenovfp},
2006-02-24 Paul Brook <paul@codesourcery.com> gas/ * config/arm/tc-arm.c (arm_ext_v6_notm, arm_ext_div, arm_ext_v7, arm_ext_v7a, arm_ext_v7r, arm_ext_v7m): New variables. (struct asm_barrier_opt): Define. (arm_v7m_psr_hsh, arm_barrier_opt_hsh): New variables. (parse_psr): Accept V7M psr names. (parse_barrier): New function. (enum operand_parse_code): Add OP_oBARRIER. (parse_operands): Implement OP_oBARRIER. (do_barrier): New function. (do_dbg, do_pli, do_t_barrier, do_t_dbg, do_t_div): New functions. (do_t_cpsi): Add V7M restrictions. (do_t_mrs, do_t_msr): Validate V7M variants. (md_assemble): Check for NULL variants. (v7m_psrs, barrier_opt_names): New tables. (insns): Add V7 instructions. Mark V6 instructions absent from V7M. (md_begin): Initialize arm_v7m_psr_hsh and arm_barrier_opt_hsh. (arm_cpu_option_table): Add Cortex-M3, R4 and A8. (arm_arch_option_table): Add armv7, armv7a, armv7r and armv7m. (struct cpu_arch_ver_table): Define. (cpu_arch_ver): New. (aeabi_set_public_attributes): Use cpu_arch_ver. Set Tag_CPU_arch_profile. * doc/c-arm.texi: Document new cpu and arch options. gas/testsuite/ * gas/arm/thumb32.d: Fix expected msr and mrs output. * gas/arm/arch7.d: New test. * gas/arm/arch7.s: New test. * gas/arm/arch7m-bad.l: New test. * gas/arm/arch7m-bad.d: New test. * gas/arm/arch7m-bad.s: New test. include/opcode/ * arm.h: Add V7 feature bits. opcodes/ * arm-dis.c (arm_opcodes): Add V7 instructions. (thumb32_opcodes): Ditto. Handle V7M MSR/MRS variants. (print_arm_address): New function. (print_insn_arm): Use it. Add 'P' and 'U' cases. (psr_name): New function. (print_insn_thumb32): Add 'U', 'C' and 'D' cases.
2006-02-24 16:36:36 +01:00
@code{cortex-a8},
@code{cortex-r4},
@code{cortex-m3},
@code{ep9312} (ARM920 with Cirrus Maverick coprocessor),
@code{i80200} (Intel XScale processor)
2003-03-25 21:56:01 +01:00
@code{iwmmxt} (Intel(r) XScale processor with Wireless MMX(tm) technology coprocessor)
and
@code{xscale}.
The special name @code{all} may be used to allow the
assembler to accept instructions valid for any ARM processor.
In addition to the basic instruction set, the assembler can be told to
accept various extension mnemonics that extend the processor using the
co-processor instruction space. For example, @code{-mcpu=arm920+maverick}
is equivalent to specifying @code{-mcpu=ep9312}. The following extensions
are currently supported:
@code{+maverick}
2003-03-25 21:56:01 +01:00
@code{+iwmmxt}
and
@code{+xscale}.
@cindex @code{-march=} command line option, ARM
@item -march=@var{architecture}[+@var{extension}@dots{}]
1999-05-03 09:29:11 +02:00
This option specifies the target architecture. The assembler will issue
an error message if an attempt is made to assemble an instruction which
will not execute on the target architecture. The following architecture
names are recognized:
@code{armv1},
@code{armv2},
@code{armv2a},
@code{armv2s},
@code{armv3},
@code{armv3m},
@code{armv4},
@code{armv4xm},
@code{armv4t},
@code{armv4txm},
@code{armv5},
@code{armv5t},
@code{armv5txm},
@code{armv5te},
* gas/arm/arm.exp: Add archv6 and thumbv6. * gas/arm/archv6.d: New file. * gas/arm/archv6.s: Likewise. * gas/arm/thumbv6.d: Likewise. * gas/arm/thumbv6.s: Likewise. Add V6 support. * config/tc-arm.c (ARM_EXT_V6): New macro. (ARM_ARCH_V6): Likewise. (SHIFT_IMMEDIATE): Likewise. (SHIFT_LSL_OR_ASR_IMMEDIATE): Likewise. (SHIFT_ASR_IMMEDIATE): Likewise. (SHIFT_LSL_IMMMEDIATE): Likewise. (do_cps): New function. (do_cpsi): Likewise. (do_ldrex): Likewise. (do_pkhbt): Likewise. (do_pkhtb): Likewise. (do_qadd16): Likewise. (do_rev): Likewise. (do_rfe): Likewise. (do_sxtah): Likewise. (do_sxth): Likewise. (do_setend): Likewise. (do_smlad): Likewise. (do_smlald): Likewise. (do_smmul): Likewise. (do_ssat): Likewise. (do_usat): Likewise. (do_srs): Likewise. (do_ssat16): Likewise. (do_usat16): Likewise. (do_strex): Likewise. (do_umaal): Likewise. (do_cps_mode): Likewise. (do_cps_flags): Likewise. (do_endian_specifier): Likewise. (do_pkh_core): Likewise. (do_sat): Likewise. (do_sat16): Likewise. (insns): Add V6 instructions. (do_t_cps): New function. (do_t_cpy): Likewise. (do_t_setend): Likewise. (THUMB_CPY): New macro. (tinsns): Add V6 instructions. (decode_shift): Handle V6 restricted-shift options. (thumb_mov_compare): Support CPY. (arm_cores): Add arm1136js and arm1136jfs. (arm_archs): Add armv6. (arm_fpus): Add arm1136jfs. * doc/c-arm.texi (ARM Options): Mention arm1136js, arm1136jfs, and armv6 options. * gas/arm/arm.exp: Add archv6 and thumbv6. * gas/arm/archv6.d: New file. * gas/arm/archv6.s: Likewise. * gas/arm/thumbv6.d: Likewise. * gas/arm/thumbv6.s: Likewise. * arm-dis.c (print_arm_insn): Add 'W' macro. * arm-opc.h (arm_opcodes): Add V6 instructions. (thumb_opcodes): Likewise.
2003-12-06 02:25:29 +01:00
@code{armv5texp},
@code{armv6},
@code{armv6j},
@code{armv6k},
@code{armv6z},
@code{armv6zk},
2006-02-24 Paul Brook <paul@codesourcery.com> gas/ * config/arm/tc-arm.c (arm_ext_v6_notm, arm_ext_div, arm_ext_v7, arm_ext_v7a, arm_ext_v7r, arm_ext_v7m): New variables. (struct asm_barrier_opt): Define. (arm_v7m_psr_hsh, arm_barrier_opt_hsh): New variables. (parse_psr): Accept V7M psr names. (parse_barrier): New function. (enum operand_parse_code): Add OP_oBARRIER. (parse_operands): Implement OP_oBARRIER. (do_barrier): New function. (do_dbg, do_pli, do_t_barrier, do_t_dbg, do_t_div): New functions. (do_t_cpsi): Add V7M restrictions. (do_t_mrs, do_t_msr): Validate V7M variants. (md_assemble): Check for NULL variants. (v7m_psrs, barrier_opt_names): New tables. (insns): Add V7 instructions. Mark V6 instructions absent from V7M. (md_begin): Initialize arm_v7m_psr_hsh and arm_barrier_opt_hsh. (arm_cpu_option_table): Add Cortex-M3, R4 and A8. (arm_arch_option_table): Add armv7, armv7a, armv7r and armv7m. (struct cpu_arch_ver_table): Define. (cpu_arch_ver): New. (aeabi_set_public_attributes): Use cpu_arch_ver. Set Tag_CPU_arch_profile. * doc/c-arm.texi: Document new cpu and arch options. gas/testsuite/ * gas/arm/thumb32.d: Fix expected msr and mrs output. * gas/arm/arch7.d: New test. * gas/arm/arch7.s: New test. * gas/arm/arch7m-bad.l: New test. * gas/arm/arch7m-bad.d: New test. * gas/arm/arch7m-bad.s: New test. include/opcode/ * arm.h: Add V7 feature bits. opcodes/ * arm-dis.c (arm_opcodes): Add V7 instructions. (thumb32_opcodes): Ditto. Handle V7M MSR/MRS variants. (print_arm_address): New function. (print_insn_arm): Use it. Add 'P' and 'U' cases. (psr_name): New function. (print_insn_thumb32): Add 'U', 'C' and 'D' cases.
2006-02-24 16:36:36 +01:00
@code{armv7},
@code{armv7-a},
@code{armv7-r},
@code{armv7-m},
2003-03-25 21:56:01 +01:00
@code{iwmmxt}
and
@code{xscale}.
If both @code{-mcpu} and
@code{-march} are specified, the assembler will use
the setting for @code{-mcpu}.
The architecture option can be extended with the same instruction set
extension options as the @code{-mcpu} option.
@cindex @code{-mfpu=} command line option, ARM
@item -mfpu=@var{floating-point-format}
This option specifies the floating point format to assemble for. The
assembler will issue an error message if an attempt is made to assemble
an instruction which will not execute on the target floating point unit.
The following format options are recognized:
@code{softfpa},
@code{fpe},
@code{fpe2},
@code{fpe3},
@code{fpa},
@code{fpa10},
@code{fpa11},
@code{arm7500fe},
@code{softvfp},
@code{softvfp+vfp},
@code{vfp},
@code{vfp10},
@code{vfp10-r0},
@code{vfp9},
@code{vfpxd},
* gas/arm/arm.exp: Add archv6 and thumbv6. * gas/arm/archv6.d: New file. * gas/arm/archv6.s: Likewise. * gas/arm/thumbv6.d: Likewise. * gas/arm/thumbv6.s: Likewise. Add V6 support. * config/tc-arm.c (ARM_EXT_V6): New macro. (ARM_ARCH_V6): Likewise. (SHIFT_IMMEDIATE): Likewise. (SHIFT_LSL_OR_ASR_IMMEDIATE): Likewise. (SHIFT_ASR_IMMEDIATE): Likewise. (SHIFT_LSL_IMMMEDIATE): Likewise. (do_cps): New function. (do_cpsi): Likewise. (do_ldrex): Likewise. (do_pkhbt): Likewise. (do_pkhtb): Likewise. (do_qadd16): Likewise. (do_rev): Likewise. (do_rfe): Likewise. (do_sxtah): Likewise. (do_sxth): Likewise. (do_setend): Likewise. (do_smlad): Likewise. (do_smlald): Likewise. (do_smmul): Likewise. (do_ssat): Likewise. (do_usat): Likewise. (do_srs): Likewise. (do_ssat16): Likewise. (do_usat16): Likewise. (do_strex): Likewise. (do_umaal): Likewise. (do_cps_mode): Likewise. (do_cps_flags): Likewise. (do_endian_specifier): Likewise. (do_pkh_core): Likewise. (do_sat): Likewise. (do_sat16): Likewise. (insns): Add V6 instructions. (do_t_cps): New function. (do_t_cpy): Likewise. (do_t_setend): Likewise. (THUMB_CPY): New macro. (tinsns): Add V6 instructions. (decode_shift): Handle V6 restricted-shift options. (thumb_mov_compare): Support CPY. (arm_cores): Add arm1136js and arm1136jfs. (arm_archs): Add armv6. (arm_fpus): Add arm1136jfs. * doc/c-arm.texi (ARM Options): Mention arm1136js, arm1136jfs, and armv6 options. * gas/arm/arm.exp: Add archv6 and thumbv6. * gas/arm/archv6.d: New file. * gas/arm/archv6.s: Likewise. * gas/arm/thumbv6.d: Likewise. * gas/arm/thumbv6.s: Likewise. * arm-dis.c (print_arm_insn): Add 'W' macro. * arm-opc.h (arm_opcodes): Add V6 instructions. (thumb_opcodes): Likewise.
2003-12-06 02:25:29 +01:00
@code{arm1020t},
@code{arm1020e},
@code{arm1136jf-s}
and
@code{maverick}.
In addition to determining which instructions are assembled, this option
also affects the way in which the @code{.double} assembler directive behaves
when assembling little-endian code.
The default is dependent on the processor selected. For Architecture 5 or
later, the default is to assembler for VFP instructions; for earlier
architectures the default is to assemble for FPA instructions.
1999-05-03 09:29:11 +02:00
@cindex @code{-mthumb} command line option, ARM
@item -mthumb
This option specifies that the assembler should start assembling Thumb
instructions; that is, it should behave as though the file starts with a
@code{.code 16} directive.
1999-05-03 09:29:11 +02:00
@cindex @code{-mthumb-interwork} command line option, ARM
@item -mthumb-interwork
This option specifies that the output generated by the assembler should
be marked as supporting interworking.
1999-05-03 09:29:11 +02:00
@cindex @code{-mapcs} command line option, ARM
@item -mapcs @code{[26|32]}
1999-05-03 09:29:11 +02:00
This option specifies that the output generated by the assembler should
be marked as supporting the indicated version of the Arm Procedure.
Calling Standard.
2000-11-25 01:21:40 +01:00
@cindex @code{-matpcs} command line option, ARM
@item -matpcs
This option specifies that the output generated by the assembler should
be marked as supporting the Arm/Thumb Procedure Calling Standard. If
enabled this option will cause the assembler to create an empty
debugging section in the object file called .arm.atpcs. Debuggers can
use this to determine the ABI being used by.
@cindex @code{-mapcs-float} command line option, ARM
1999-05-03 09:29:11 +02:00
@item -mapcs-float
2003-11-06 12:58:58 +01:00
This indicates the floating point variant of the APCS should be
1999-05-03 09:29:11 +02:00
used. In this variant floating point arguments are passed in FP
2000-01-10 23:22:56 +01:00
registers rather than integer registers.
@cindex @code{-mapcs-reentrant} command line option, ARM
1999-05-03 09:29:11 +02:00
@item -mapcs-reentrant
This indicates that the reentrant variant of the APCS should be used.
This variant supports position independent code.
@cindex @code{-mfloat-abi=} command line option, ARM
@item -mfloat-abi=@var{abi}
This option specifies that the output generated by the assembler should be
marked as using specified floating point ABI.
The following values are recognized:
@code{soft},
@code{softfp}
and
@code{hard}.
@cindex @code{-eabi=} command line option, ARM
@item -meabi=@var{ver}
This option specifies which EABI version the produced object files should
conform to.
2006-07-24 15:49:50 +02:00
The following values are recognized:
@code{gnu},
@code{4}
and
@code{5}.
1999-05-03 09:29:11 +02:00
@cindex @code{-EB} command line option, ARM
@item -EB
This option specifies that the output generated by the assembler should
be marked as being encoded for a big-endian processor.
1999-05-03 09:29:11 +02:00
@cindex @code{-EL} command line option, ARM
@item -EL
This option specifies that the output generated by the assembler should
be marked as being encoded for a little-endian processor.
1999-05-03 09:29:11 +02:00
@cindex @code{-k} command line option, ARM
@cindex PIC code generation for ARM
@item -k
This option specifies that the output of the assembler should be marked
as position-independent code (PIC).
1999-05-03 09:29:11 +02:00
@end table
@node ARM Syntax
@section Syntax
@menu
* ARM-Chars:: Special Characters
* ARM-Regs:: Register Names
* ARM-Relocations:: Relocations
1999-05-03 09:29:11 +02:00
@end menu
@node ARM-Chars
@subsection Special Characters
@cindex line comment character, ARM
@cindex ARM line comment character
2000-01-10 23:22:56 +01:00
The presence of a @samp{@@} on a line indicates the start of a comment
that extends to the end of the current line. If a @samp{#} appears as
the first character of a line, the whole line is treated as a comment.
@cindex line separator, ARM
@cindex statement separator, ARM
@cindex ARM line separator
The @samp{;} character can be used instead of a newline to separate
statements.
2000-01-10 23:22:56 +01:00
@cindex immediate character, ARM
@cindex ARM immediate character
Either @samp{#} or @samp{$} can be used to indicate immediate operands.
1999-05-03 09:29:11 +02:00
@cindex identifiers, ARM
@cindex ARM identifiers
*TODO* Explain about /data modifier on symbols.
@node ARM-Regs
@subsection Register Names
@cindex ARM register names
@cindex register names, ARM
*TODO* Explain about ARM register naming, and the predefined names.
@node ARM Floating Point
@section Floating Point
@cindex floating point, ARM (@sc{ieee})
@cindex ARM floating point (@sc{ieee})
The ARM family uses @sc{ieee} floating-point numbers.
@node ARM-Relocations
@subsection ARM relocation generation
@cindex data relocations, ARM
@cindex ARM data relocations
Specific data relocations can be generated by putting the relocation name
in parentheses after the symbol name. For example:
@smallexample
.word foo(TARGET1)
@end smallexample
This will generate an @samp{R_ARM_TARGET1} relocation against the symbol
@var{foo}.
The following relocations are supported:
@code{GOT},
@code{GOTOFF},
@code{TARGET1},
@code{TARGET2},
@code{SBREL},
@code{TLSGD},
@code{TLSLDM},
@code{TLSLDO},
@code{GOTTPOFF}
and
@code{TPOFF}.
For compatibility with older toolchains the assembler also accepts
@code{(PLT)} after branch targets. This will generate the deprecated
@samp{R_ARM_PLT32} relocation.
@cindex MOVW and MOVT relocations, ARM
Relocations for @samp{MOVW} and @samp{MOVT} instructions can be generated
by prefixing the value with @samp{#:lower16:} and @samp{#:upper16}
2006-07-24 15:49:50 +02:00
respectively. For example to load the 32-bit address of foo into r0:
1999-05-03 09:29:11 +02:00
@smallexample
MOVW r0, #:lower16:foo
MOVT r0, #:upper16:foo
@end smallexample
1999-05-03 09:29:11 +02:00
@node ARM Directives
@section ARM Machine Directives
@cindex machine directives, ARM
@cindex ARM machine directives
@table @code
@cindex @code{align} directive, ARM
@item .align @var{expression} [, @var{expression}]
This is the generic @var{.align} directive. For the ARM however if the
first argument is zero (ie no alignment is needed) the assembler will
behave as if the argument had been 2 (ie pad to the next four byte
boundary). This is for compatibility with ARM's own assembler.
1999-05-03 09:29:11 +02:00
@cindex @code{req} directive, ARM
@item @var{name} .req @var{register name}
This creates an alias for @var{register name} called @var{name}. For
example:
@smallexample
foo .req r0
@end smallexample
@cindex @code{unreq} directive, ARM
@item .unreq @var{alias-name}
This undefines a register alias which was previously defined using the
@code{req} directive. For example:
@smallexample
foo .req r0
.unreq foo
@end smallexample
An error occurs if the name is undefined. Note - this pseudo op can
be used to delete builtin in register name aliases (eg 'r0'). This
should only be done if it is really necessary.
1999-05-03 09:29:11 +02:00
@cindex @code{code} directive, ARM
@item .code @code{[16|32]}
1999-05-03 09:29:11 +02:00
This directive selects the instruction set being generated. The value 16
selects Thumb, with the value 32 selecting ARM.
@cindex @code{thumb} directive, ARM
@item .thumb
This performs the same action as @var{.code 16}.
@cindex @code{arm} directive, ARM
@item .arm
This performs the same action as @var{.code 32}.
@cindex @code{force_thumb} directive, ARM
@item .force_thumb
This directive forces the selection of Thumb instructions, even if the
target processor does not support those instructions
@cindex @code{thumb_func} directive, ARM
@item .thumb_func
This directive specifies that the following symbol is the name of a
Thumb encoded function. This information is necessary in order to allow
the assembler and linker to generate correct code for interworking
between Arm and Thumb instructions and should be used even if
interworking is not going to be performed. The presence of this
directive also implies @code{.thumb}
1999-05-03 09:29:11 +02:00
This directive is not neccessary when generating EABI objects. On these
targets the encoding is implicit when generating Thumb code.
1999-07-08 03:49:09 +02:00
@cindex @code{thumb_set} directive, ARM
@item .thumb_set
This performs the equivalent of a @code{.set} directive in that it
creates a symbol which is an alias for another symbol (possibly not yet
defined). This directive also has the added property in that it marks
the aliased symbol as being a thumb function entry point, in the same
way that the @code{.thumb_func} directive does.
1999-05-03 09:29:11 +02:00
@cindex @code{.ltorg} directive, ARM
@item .ltorg
This directive causes the current contents of the literal pool to be
dumped into the current section (which is assumed to be the .text
section) at the current location (aligned to a word boundary).
@code{GAS} maintains a separate literal pool for each section and each
sub-section. The @code{.ltorg} directive will only affect the literal
pool of the current section and sub-section. At the end of assembly
all remaining, un-empty literal pools will automatically be dumped.
Note - older versions of @code{GAS} would dump the current literal
pool any time a section change occurred. This is no longer done, since
it prevents accurate control of the placement of literal pools.
1999-05-03 09:29:11 +02:00
@cindex @code{.pool} directive, ARM
@item .pool
This is a synonym for .ltorg.
@cindex @code{.fnstart} directive, ARM
@item .unwind_fnstart
Marks the start of a function with an unwind table entry.
@cindex @code{.fnend} directive, ARM
@item .unwind_fnend
Marks the end of a function with an unwind table entry. The unwind index
table entry is created when this directive is processed.
If no personality routine has been specified then standard personality
routine 0 or 1 will be used, depending on the number of unwind opcodes
required.
@cindex @code{.cantunwind} directive, ARM
@item .cantunwind
Prevents unwinding through the current function. No personality routine
or exception table data is required or permitted.
@cindex @code{.personality} directive, ARM
@item .personality @var{name}
Sets the personality routine for the current function to @var{name}.
@cindex @code{.personalityindex} directive, ARM
@item .personalityindex @var{index}
Sets the personality routine for the current function to the EABI standard
routine number @var{index}
@cindex @code{.handlerdata} directive, ARM
@item .handlerdata
Marks the end of the current function, and the start of the exception table
entry for that function. Anything between this directive and the
@code{.fnend} directive will be added to the exception table entry.
Must be preceded by a @code{.personality} or @code{.personalityindex}
directive.
@cindex @code{.save} directive, ARM
@item .save @var{reglist}
Generate unwinder annotations to restore the registers in @var{reglist}.
The format of @var{reglist} is the same as the corresponding store-multiple
instruction.
@smallexample
@exdent @emph{core registers}
.save @{r4, r5, r6, lr@}
stmfd sp!, @{r4, r5, r6, lr@}
@exdent @emph{FPA registers}
.save f4, 2
sfmfd f4, 2, [sp]!
@exdent @emph{VFP registers}
.save @{d8, d9, d10@}
fstmdx sp!, @{d8, d9, d10@}
@exdent @emph{iWMMXt registers}
.save @{wr10, wr11@}
wstrd wr11, [sp, #-8]!
wstrd wr10, [sp, #-8]!
or
.save wr11
wstrd wr11, [sp, #-8]!
.save wr10
wstrd wr10, [sp, #-8]!
@end smallexample
@cindex @code{.vsave} directive, ARM
@item .vsave @var{vfp-reglist}
Generate unwinder annotations to restore the VFP registers in @var{vfp-reglist}
using FLDMD. Also works for VFPv3 registers
that are to be restored using VLDM.
The format of @var{vfp-reglist} is the same as the corresponding store-multiple
instruction.
@smallexample
@exdent @emph{VFP registers}
.vsave @{d8, d9, d10@}
fstmdd sp!, @{d8, d9, d10@}
@exdent @emph{VFPv3 registers}
.vsave @{d15, d16, d17@}
vstm sp!, @{d15, d16, d17@}
@end smallexample
Since FLDMX and FSTMX are now deprecated, this directive should be
used in favour of @code{.save} for saving VFP registers for ARMv6 and above.
@cindex @code{.pad} directive, ARM
@item .pad #@var{count}
Generate unwinder annotations for a stack adjustment of @var{count} bytes.
A positive value indicates the function prologue allocated stack space by
decrementing the stack pointer.
@cindex @code{.movsp} directive, ARM
@item .movsp @var{reg} [, #@var{offset}]
Tell the unwinder that @var{reg} contains an offset from the current
stack pointer. If @var{offset} is not specified then it is assumed to be
zero.
@cindex @code{.setfp} directive, ARM
@item .setfp @var{fpreg}, @var{spreg} [, #@var{offset}]
Make all unwinder annotations relaive to a frame pointer. Without this
the unwinder will use offsets from the stack pointer.
The syntax of this directive is the same as the @code{sub} or @code{mov}
instruction used to set the frame pointer. @var{spreg} must be either
@code{sp} or mentioned in a previous @code{.movsp} directive.
@smallexample
.movsp ip
mov ip, sp
@dots{}
.setfp fp, ip, #4
sub fp, ip, #4
@end smallexample
@cindex @code{.unwind_raw} directive, ARM
@item .raw @var{offset}, @var{byte1}, @dots{}
Insert one of more arbitary unwind opcode bytes, which are known to adjust
the stack pointer by @var{offset} bytes.
For example @code{.unwind_raw 4, 0xb1, 0x01} is equivalent to
@code{.save @{r0@}}
2005-10-08 Paul Brook <paul@codesourcery.com> bfd/ * elf32-arm.c: Move #include "elf/arm.h" after libbfd.h. (NUM_KNOWN_ATTRIBUTES): Define. (aeabi_attribute, aeabi_attribute_list): Define. (elf32_arm_obj_tdata): Add known_eabi_attributes and other_eabi_attributes. (uleb128_size, is_default_attr, eabi_attr_size, elf32_arm_eabi_attr_size, write_uleb128, write_eabi_attribute, elf32_arm_set_eabi_attr_contents, elf32_arm_bfd_final_link, elf32_arm_new_eabi_attr, attr_strdup, elf32_arm_add_eabi_attr_int, elf32_arm_add_eabi_attr_compat, copy_eabi_attributes, elf32_arm_merge_eabi_attributes): New functions. (elf32_arm_copy_private_bfd_data): Copy EABI object attributes. (elf32_arm_fake_sections): Handle .ARM.attributes. (elf32_arm_parse_attributes): New function. (elf32_arm_section_from_shdr): Use it. (bfd_elf32_bfd_final_link): Define. gas/ * config/tc-arm.c: Don't provide fallback default for CPU_DEFAULT. (arm_arch_used, thumb_arch_used, selected_cpu, selected_cpu_name): New variables. (arm_cpu_option_table): Add canonical_name. (arm_cpus): Populate canonical_name field. (s_arm_eabi_attribute, s_arm_arch, s_arm_cpu, s_arm_fpu, aeabi_set_public_attributes, arm_md_end): New functions. (md_pseudo_table): Add "cpu", "arch", "fpu" and "eabi_attribute". (md_assemble): Set thumb_arch_used and arm_arch_used. (md_begin): Set defaut cpu if CPU_DEFAULT not defined. * config/tc-arm.h (md_end): Define. * doc/c-arm.texi: Document .cpu, .arch, .fpu and .eabi_attribute. gas/testsuite/ * gas/arm/eabi_attr_1.s: New test. * gas/arm/eabi_attr_1.d: New test. * gas/arm/arm7t.d: Only disassemble code sections. * gas/arm/bignum1.d: Ignore Arm object attribute sections. * gas/arm/mapping.d: Ditto. * gas/arm/unwind.d: Ditto. * gas/elf/section0.d: Ditto. * gas/elf/section1.d: Ditto. * gas/elf/elf.exp: Set target_machine for Arm EABI based targets. * gas/elf/section2.e-armeabi: New file. include/elf/ * arm.h: Add prototypes for BFD object attribute routines. ld/testsuite/ * ld-arm/arm-rel31.d: Ignore Arm object attribute sections. * ld-arm/arm-target1-abs.d: Ditto. * ld-arm/arm-target1-rel.d: Ditto. * ld-arm/arm-target2-abs.d: Ditto. * ld-arm/arm-target2-got-rel.d: Ditto. * ld-arm/arm-target2-rel.d: Ditto.
2005-10-08 19:07:19 +02:00
@cindex @code{.cpu} directive, ARM
@item .cpu @var{name}
Select the target processor. Valid values for @var{name} are the same as
for the @option{-mcpu} commandline option.
@cindex @code{.arch} directive, ARM
@item .arch @var{name}
Select the target architecture. Valid values for @var{name} are the same as
for the @option{-march} commandline option.
@cindex @code{.object_arch} directive, ARM
@item .object_arch @var{name}
Override the architecture recorded in the EABI object attribute section.
Valid values for @var{name} are the same as for the @code{.arch} directive.
Typically this is useful when code uses runtime detection of CPU features.
2005-10-08 Paul Brook <paul@codesourcery.com> bfd/ * elf32-arm.c: Move #include "elf/arm.h" after libbfd.h. (NUM_KNOWN_ATTRIBUTES): Define. (aeabi_attribute, aeabi_attribute_list): Define. (elf32_arm_obj_tdata): Add known_eabi_attributes and other_eabi_attributes. (uleb128_size, is_default_attr, eabi_attr_size, elf32_arm_eabi_attr_size, write_uleb128, write_eabi_attribute, elf32_arm_set_eabi_attr_contents, elf32_arm_bfd_final_link, elf32_arm_new_eabi_attr, attr_strdup, elf32_arm_add_eabi_attr_int, elf32_arm_add_eabi_attr_compat, copy_eabi_attributes, elf32_arm_merge_eabi_attributes): New functions. (elf32_arm_copy_private_bfd_data): Copy EABI object attributes. (elf32_arm_fake_sections): Handle .ARM.attributes. (elf32_arm_parse_attributes): New function. (elf32_arm_section_from_shdr): Use it. (bfd_elf32_bfd_final_link): Define. gas/ * config/tc-arm.c: Don't provide fallback default for CPU_DEFAULT. (arm_arch_used, thumb_arch_used, selected_cpu, selected_cpu_name): New variables. (arm_cpu_option_table): Add canonical_name. (arm_cpus): Populate canonical_name field. (s_arm_eabi_attribute, s_arm_arch, s_arm_cpu, s_arm_fpu, aeabi_set_public_attributes, arm_md_end): New functions. (md_pseudo_table): Add "cpu", "arch", "fpu" and "eabi_attribute". (md_assemble): Set thumb_arch_used and arm_arch_used. (md_begin): Set defaut cpu if CPU_DEFAULT not defined. * config/tc-arm.h (md_end): Define. * doc/c-arm.texi: Document .cpu, .arch, .fpu and .eabi_attribute. gas/testsuite/ * gas/arm/eabi_attr_1.s: New test. * gas/arm/eabi_attr_1.d: New test. * gas/arm/arm7t.d: Only disassemble code sections. * gas/arm/bignum1.d: Ignore Arm object attribute sections. * gas/arm/mapping.d: Ditto. * gas/arm/unwind.d: Ditto. * gas/elf/section0.d: Ditto. * gas/elf/section1.d: Ditto. * gas/elf/elf.exp: Set target_machine for Arm EABI based targets. * gas/elf/section2.e-armeabi: New file. include/elf/ * arm.h: Add prototypes for BFD object attribute routines. ld/testsuite/ * ld-arm/arm-rel31.d: Ignore Arm object attribute sections. * ld-arm/arm-target1-abs.d: Ditto. * ld-arm/arm-target1-rel.d: Ditto. * ld-arm/arm-target2-abs.d: Ditto. * ld-arm/arm-target2-got-rel.d: Ditto. * ld-arm/arm-target2-rel.d: Ditto.
2005-10-08 19:07:19 +02:00
@cindex @code{.fpu} directive, ARM
@item .fpu @var{name}
Select the floating point unit to assemble for. Valid values for @var{name}
are the same as for the @option{-mfpu} commandline option.
@cindex @code{.eabi_attribute} directive, ARM
@item .eabi_attribute @var{tag}, @var{value}
Set the EABI object attribute number @var{tag} to @var{value}. The value
is either a @code{number}, @code{"string"}, or @code{number, "string"}
depending on the tag.
1999-05-03 09:29:11 +02:00
@end table
@node ARM Opcodes
@section Opcodes
@cindex ARM opcodes
@cindex opcodes for ARM
@code{@value{AS}} implements all the standard ARM opcodes. It also
implements several pseudo opcodes, including several synthetic load
instructions.
1999-05-03 09:29:11 +02:00
@table @code
@cindex @code{NOP} pseudo op, ARM
@item NOP
@smallexample
nop
@end smallexample
1999-05-03 09:29:11 +02:00
This pseudo op will always evaluate to a legal ARM instruction that does
nothing. Currently it will evaluate to MOV r0, r0.
1999-05-03 09:29:11 +02:00
@cindex @code{LDR reg,=<label>} pseudo op, ARM
@item LDR
1999-05-03 09:29:11 +02:00
@smallexample
ldr <register> , = <expression>
@end smallexample
If expression evaluates to a numeric constant then a MOV or MVN
instruction will be used in place of the LDR instruction, if the
constant can be generated by either of these instructions. Otherwise
the constant will be placed into the nearest literal pool (if it not
already there) and a PC relative LDR instruction will be generated.
@cindex @code{ADR reg,<label>} pseudo op, ARM
@item ADR
@smallexample
adr <register> <label>
@end smallexample
This instruction will load the address of @var{label} into the indicated
register. The instruction will evaluate to a PC relative ADD or SUB
instruction depending upon where the label is located. If the label is
out of range, or if it is not defined in the same file (and section) as
the ADR instruction, then an error will be generated. This instruction
will not make use of the literal pool.
@cindex @code{ADRL reg,<label>} pseudo op, ARM
@item ADRL
@smallexample
adrl <register> <label>
@end smallexample
This instruction will load the address of @var{label} into the indicated
register. The instruction will evaluate to one or two PC relative ADD
or SUB instructions depending upon where the label is located. If a
second instruction is not needed a NOP instruction will be generated in
its place, so that this instruction is always 8 bytes long.
If the label is out of range, or if it is not defined in the same file
(and section) as the ADRL instruction, then an error will be generated.
This instruction will not make use of the literal pool.
@end table
1999-05-03 09:29:11 +02:00
For information on the ARM or Thumb instruction sets, see @cite{ARM
Software Development Toolkit Reference Manual}, Advanced RISC Machines
Ltd.
@node ARM Mapping Symbols
@section Mapping Symbols
The ARM ELF specification requires that special symbols be inserted
into object files to mark certain features:
@table @code
@cindex @code{$a}
@item $a
At the start of a region of code containing ARM instructions.
@cindex @code{$t}
@item $t
At the start of a region of code containing THUMB instructions.
@cindex @code{$d}
@item $d
At the start of a region of data.
@end table
The assembler will automatically insert these symbols for you - there
is no need to code them yourself. Support for tagging symbols ($b,
$f, $p and $m) which is also mentioned in the current ARM ELF
specification is not implemented. This is because they have been
dropped from the new EABI and so tools cannot rely upon their
presence.