opcodes * i386-dis.c (print_insn): Fix decoding of three byte operands.
tests * gas/i386/intel.s: Add test of disassembly of a potential
three byte instuction at the end of a function.
* gas/i386/intel.d: Update expected disassembly.
gas/testsuite/
PR binutils/13571
* gas/i386/i386.exp: Run i386-intel and x86_64-intel.
* gas/i386/i386-intel.d: New file.
* gas/i386/x86_64-intel.d: Likewise.
opcodes/
PR binutils/13571
* i386-dis.c (MOD_0FC3): New.
(PREFIX_0FC3): Renamed to ...
(PREFIX_MOD_0_0FC3): This.
(dis386_twobyte): Replace PREFIX_0FC3 with MOD_0FC3.
(prefix_table): Replace Ma with Ev on movntiS.
(mod_table): Add MOD_0FC3.
As pointed out before, the documentation mandates the rounding mode to
follow the GPR, so disassembler should produce output accordingly.
gas/testsuite/
2015-06-01 Jan Beulich <jbeulich@suse.com>
* gas/i386/avx512f.s: Adjust operand order for Intel syntax
vcvt{,u}si2ss.
* gas/i386/x86-64-avx512f.s: Adjust operand order for Intel
syntax vcvt{,u}si2s{d,s}.
opcodes/
2015-06-01 Jan Beulich <jbeulich@suse.com>
* i386-dis.c (print_insn): Swap rounding mode specifier and
general purpose register in Intel mode.
AMD64 spec and Intel64 spec differ in direct unconditional branches in
64-bit mode. AMD64 supports direct unconditional branches with 16-bit
offset via the data size prefix, which truncates RIP to 16 bits, while
the data size prefix is ignored by Intel64.
This patch adds -mamd64/-mintel64 option to x86-64 assembler and
-Mamd64/-Mintel64 option to x86-64 disassembler. The most permissive
ISA, which is AMD64, is the default.
GDB can add an option, similar to
(gdb) help set disassembly-flavor
Set the disassembly flavor.
The valid values are "att" and "intel", and the default value is "att".
to select which ISA to disassemble.
binutils/
PR binutis/18386
* doc/binutils.texi: Document -Mamd64 and -Mintel64.
gas/
PR binutis/18386
* config/tc-i386.c (OPTION_MAMD64): New.
(OPTION_MINTEL64): Likewise.
(md_longopts): Add -mamd64 and -mintel64.
(md_parse_option): Handle OPTION_MAMD64 and OPTION_MINTEL64.
(md_show_usage): Add -mamd64 and -mintel64.
* doc/c-i386.texi: Document -mamd64 and -mintel64.
gas/testsuite/
PR binutis/18386
* gas/i386/i386.exp: Run x86-64-branch-2 and x86-64-branch-3.
* gas/i386/x86-64-branch.d: Also pass -Mintel64 to objdump.
* gas/i386/ilp32/x86-64-branch.d: Likewise.
* gas/i386/x86-64-branch-2.d: New file.
* gas/i386/x86-64-branch-2.s: Likewise.
* gas/i386/x86-64-branch-3.l: Likewise.
* gas/i386/x86-64-branch-3.s: Likewise.
ld/testsuite/
PR binutis/18386
* ld-x86-64/tlsgdesc.dd: Also pass -Mintel64 to objdump.
* ld-x86-64/tlspic.dd: Likewise.
* ld-x86-64/x86-64.exp (x86_64tests): Also pass -Mintel64 to
objdump for tlspic.dd and tlsgdesc.dd.
opcodes/
PR binutis/18386
* i386-dis.c: Add comments for '@'.
(x86_64_table): Use '@' on call/jmp for X86_64_E8/X86_64_E9.
(enum x86_64_isa): New.
(isa64): Likewise.
(print_i386_disassembler_options): Add amd64 and intel64.
(print_insn): Handle amd64 and intel64.
(putop): Handle '@'.
(OP_J): Don't ignore the operand size prefix for AMD64 in 64-bit.
* i386-gen.c (cpu_flags): Add CpuAMD64 and CpuIntel64.
* i386-opc.h (AMD64): New.
(CpuIntel64): Likewise.
(i386_cpu_flags): Add cpuamd64 and cpuintel64.
* i386-opc.tbl: Add direct call/jmp with Disp16|Disp32 for AMD64.
Mark direct call/jmp without Disp16|Disp32 as Intel64.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
Certain conversion operations as well as vfpclassp{d,s} are ambiguous
when the input operand is in memory and no broadcast is being used.
While in Intel mode this gets resolved by printing suitable operand
size modifiers, AT&T mode need mnemonic suffixes to be added.
gas/testsuite/
2015-04-23 Jan Beulich <jbeulich@suse.com>
* gas/i386/avx512dq.d: Add 'z' suffix to vfpclassp{d,s} non-
register, non-broadcast cases.
* gas/i386/x86-64-avx512dq.d: Likewise.
* gas/i386/avx512dq_vl.d: Add 'x' and 'y' suffixes to
vcvt{,u}qq2ps and vfpclassp{d,s} non-register, non-broadcast
cases.
* gas/i386/x86-64-avx512dq_vl.d: Likewise.
* gas/i386/avx512f_vl.d: Add 'x' and 'y' suffixes to
vcvt{,t}pd2{,u}dq and vcvtpd2ps non-register, non-broadcast
cases.
* gas/i386/x86-64-avx512f_vl.d: Likewise.
opcodes/
2015-04-23 Jan Beulich <jbeulich@suse.com>
* i386-dis.c (putop): Extend "XY" handling to AVX512. Handle "XZ".
* i386-dis-evex.h.c (vcvtpd2ps, vcvtqq2ps, vcvttpd2udq,
vcvtpd2udq, vcvtuqq2ps, vcvttpd2dq, vcvtpd2dq): Add %XY.
(vfpclasspd, vfpclassps): Add %XZ.
This patch puts rdrand and rdseed in prefix_table so that invalid
prefixes for rdrand and rdseed are handled properly.
gas/testsuite/
PR binutils/17898
* gas/i386/prefix.s: Add rdrand/rdseed prefix tests.
* gas/i386/prefix.d: Updated.
opcodes/
PR binutils/17898
* i386-dis.c (PREFIX_0FC7_REG_6): Renamed to ...
(PREFIX_MOD_0_0FC7_REG_6): This.
(PREFIX_MOD_3_0FC7_REG_6): New.
(PREFIX_MOD_3_0FC7_REG_7): Likewise.
(prefix_table): Replace PREFIX_0FC7_REG_6 with
PREFIX_MOD_0_0FC7_REG_6. Add PREFIX_MOD_3_0FC7_REG_6 and
PREFIX_MOD_3_0FC7_REG_7.
(mod_table): Replace PREFIX_0FC7_REG_6 with
PREFIX_MOD_0_0FC7_REG_6. Use PREFIX_MOD_3_0FC7_REG_6 and
PREFIX_MOD_3_0FC7_REG_7.
This patch updates multiple opcode prefix processing:
1. Always print prefix together with bad opcode.
2. Since the last seen segment register prefix is active, we only print
the active segment register in the memory operand.
3. The 0xf2 and 0xf3 prefixes take precedence over the 0x66 prefix as the
opcode prefix. Also the last of the 0xf2 and 0xf3 prefixes wins.
4. Ignore invalid 0xf2/0xf3 prefixes if they aren't mandatory.
gas/testsuite/
PR binutils/16893
* gas/i386/katmai.d: Expect "gs" as prefix.
* gas/i386/long-1.s: Replace movapd with movss.
* gas/i386/x86-64-long-1.s: Likewise.
* gas/i386/long-1-intel.d: Updated.
* gas/i386/long-1.d: Likewise.
* gas/i386/x86-64-long-1-intel.d: Likewise.
* gas/i386/x86-64-long-1.d: Likewise.
* gas/i386/prefix.s: Add tests for multiple 0x66, 0x67, 0xf0,
0xf2 and 0xf3 prefixes.
* gas/i386/prefix.d: Updated.
opcodes/
PR binutils/16893
* i386-dis.c (twobyte_has_mandatory_prefix): New variable.
(end_codep): Likewise.
(mandatory_prefix): Likewise.
(active_seg_prefix): Likewise.
(ckprefix): Set active_seg_prefix to the active segment register
prefix.
(seg_prefix): Removed.
(get_valid_dis386): Use the last of PREFIX_REPNZ and PREFIX_REPZ
for prefix index. Ignore the index if it is invalid and the
mandatory prefix isn't required.
(print_insn): Set mandatory_prefix if the PREFIX_XXX prefix is
mandatory. Don't set PREFIX_REPZ/PREFIX_REPNZ/PREFIX_LOCK bits
in used_prefixes here. Don't print unused prefixes. Check
active_seg_prefix for the active segment register prefix.
Restore the DFLAG bit in sizeflag if the data size prefix is
unused. Check the unused mandatory PREFIX_XXX prefixes
(append_seg): Only print the segment register which gets used.
(OP_E_memory): Check active_seg_prefix for the segment register
prefix.
(OP_OFF): Likewise.
(OP_OFF64): Likewise.
(OP_DSreg): Set active_seg_prefix to PREFIX_DS if it is unset.
sigsetjmp/siglongjmp without saving the signal mask is faster than
setjmp/longjmp on systems where the signal mask is saved. This patch
uses sigsetjmp/siglongjmp without saving the signal mask if possible.
PR binutils/16886
* config.in: Regenerated.
* configure: Likewise.
* configure.in: Check if sigsetjmp is available.
* h8500-dis.c (private): Replace jmp_buf with OPCODES_SIGJMP_BUF.
(fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
(print_insn_h8500): Replace setjmp with OPCODES_SIGSETJMP.
* i386-dis.c (dis_private): Replace jmp_buf with OPCODES_SIGJMP_BUF.
(fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
(print_insn): Replace setjmp with OPCODES_SIGSETJMP.
* ns32k-dis.c (private): Replace jmp_buf with OPCODES_SIGJMP_BUF.
(fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
(print_insn_ns32k): Replace setjmp with OPCODES_SIGSETJMP.
* sysdep.h (OPCODES_SIGJMP_BUF): New macro.
(OPCODES_SIGSETJMP): Likewise.
(OPCODES_SIGLONGJMP): Likewise.
* vax-dis.c (private): Replace jmp_buf with OPCODES_SIGJMP_BUF.
(fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
(print_insn_vax): Replace setjmp with OPCODES_SIGSETJMP.
* xtensa-dis.c (dis_private): Replace jmp_buf with
OPCODES_SIGJMP_BUF.
(fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
(print_insn_xtensa): Replace setjmp with OPCODES_SIGSETJMP.
* z8k-dis.c(instr_data_s): Replace jmp_buf with OPCODES_SIGJMP_BUF.
(fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
(print_insn_z8k): Replace setjmp with OPCODES_SIGSETJMP.
0x9b (fwait) is both an instruction and an opcode prefix. When 0x9b is
treated as an instruction, we need to handle any prefixes before it.
This patch handles it properly.
gas/testsuite/
PR binutils/16891
* gas/i386/opcode.s: Add test for fwait with prefix.
* gas/i386/opcode-intel.d: Updated.
* gas/i386/opcode-suffix.d: Likewise.
* gas/i386/opcode.d: Likewise.
opcodes/
PR binutils/16891
* i386-dis.c (print_insn): Handle prefixes before fwait.
For gathers with indices larger than elements (e. g.)
vpgatherqd ymm6{k1}, ZMMWORD PTR [ebp+zmm7*8-123]
We currently treat memory size as a size of index register, while it is
actually should be size of destination register:
vpgatherqd ymm6{k1}, YMMWORD PTR [ebp+zmm7*8-123]
This patch fixes it.
opcodes/
* i386-opc.tbl: Change memory size for vgatherpf0qps, vgatherpf1qps,
vscatterpf0qps, vscatterpf1qps, vgatherqps, vpgatherqd, vpscatterqd,
vscatterqps.
* i386-tbl.h: Regenerate.
gas/testsuite/
* gas/i386/avx512pf-intel.d: Change memory size for vgatherpf0qps,
vgatherpf1qps, vscatterpf0qps, vscatterpf1qps.
* gas/i386/avx512pf.s: Ditto.
* gas/i386/x86-64-avx512pf-intel.d: Ditto.
* gas/i386/x86-64-avx512pf.s: Ditto.
* gas/i386/avx512f-intel.d: Change memory size for vgatherqps,
vpgatherqd, vpscatterqd, vscatterqps.
* gas/i386/avx512f.s: Ditto.
* gas/i386/x86-64-avx512f-intel.d: Ditto.
* gas/i386/x86-64-avx512f.s: Ditto.
* gas/i386/rex.s: Add test of REX prefix before fsave (i.e. fwait).
* gas/i386/rex.d: Update.
opcodes/
* i386-dis.c (ckprefix): When bailing out for fwait with prefixes,
set rex_used to rex.
* gas/i386/prefetch.s: New file.
* gas/i386/prefetch.d: New file.
* gas/i386/prefetch-intel.d: New file.
* gas/i386/x86-64-prefetch.d: New file.
* gas/i386/x86-64-prefetch-intel.d: New file.
* gas/i386/i386.exp: Run them.
opcodes/
* i386-dis.c (reg_table): Fill out REG_0F0D table with
AMD-reserved cases as "prefetch".
(MOD_0F18_REG_4, MOD_0F18_REG_5): New enum constants.
(MOD_0F18_REG_6, MOD_0F18_REG_7): Likewise.
(reg_table): Use those under REG_0F18.
(mod_table): Add those cases as "nop/reserved".
H.J. Lu
Alan Modra
Jan Stancek
Alexander Fomin
Amit Pawar
Jan Beulich
Ilya Tocar
Ganesh Gopalasubramanian
Michael Zolotukhin
Roland McGrath
Roland McGrath