* features/Makefile (rs6000/powerpc-isa205-32l-expedite,
rs6000/powerpc-isa205-altivec32l-expedite,
powerpc-isa205-vsx32l-expedite, rs6000/powerpc-isa205-64l-expedite,
rs6000/powerpc-isa205-altivec64l-expedite,
powerpc-isa205-vsx64l-expedite): New variables.
* regformats/rs6000/powerpc-isa205-32l.dat: Generate.
* regformats/rs6000/powerpc-isa205-altivec32l.dat: Generate.
* regformats/rs6000/powerpc-isa205-vsx32l.dat: Generate.
* regformats/rs6000/powerpc-isa205-64l.dat: Generate.
* regformats/rs6000/powerpc-isa205-altivec64l.dat: Generate.
* regformats/rs6000/powerpc-isa205-vsx64l.dat: Generate.
gdbserver/
* Makefile.in (powerpc-isa205-32l.o, powerpc-isa205-32l.c,
powerpc-isa205-altivec32l.o, powerpc-isa205-altivec32l.c,
powerpc-isa205-vsx32l.o, powerpc-isa205-vsx32l.c,
powerpc-isa205-64l.o, powerpc-isa205-64l.c,
powerpc-isa205-altivec64l.o, powerpc-isa205-altivec64l.c,
powerpc-isa205-vsx64l.o, powerpc-isa205-vsx64l.c): New targets.
* configure.srv (powerpc*-*-linux*): Add ISA 2.05 object files and
XML target descriptions.
* linux-ppc-low.c (ppc_arch_setup): Init registers with 64-bit FPSCR
when inferior is running on an ISA 2.05 or later processor. Add
special case to return offset for full 64-bit slot of FPSCR when
in 32-bits.
2008-08-12 Sandra Loosemore <sandra@codesourcery.com>
* gdb.texinfo (Remote Configuration): Document set remote noack-packet.
(Remote Protocol): Add Packet Acknowledgment to menu.
(Overview): Mention +/- can be disabled, and point to new section
where this is discussed in detail.
(General Query Packets): Document QStartNoAckMode packet, and
corresponding qSupported reply.
(Packet Acknowledgment): New section.
gdb/
2008-08-12 Pedro Alves <pedro@codesourcery.com>
Add no-ack mode to the remote protocol --- optionally stop ACKing
packets and responses when we have a reliable communication
medium.
Based on Apple's GDB, by Jason Molenda <jmolenda@apple.com>
* remote.c (struct remote_state): Add noack_mode field.
(PACKET_QStartNoAckMode): New.
(remote_start_remote): Don't any outstanding packet here.
(remote_open_1): Clear noack_mode. Ack any outstanding packet
here. Activate noack mode if requested.
(remote_protocol_features): Add QStartNoAckMode.
(remote_open_1):
(putpkt_binary): Don't send ack in noack mode.
(read_frame): Don't recompute the checksum in noack mode.
(getpkt_sane): Skip sending ack if in noack mode.
(_initialize_remote): Add set/show remote noack mode.
* NEWS: Note the new features.
gdb/gdbserver/
2008-08-12 Pedro Alves <pedro@codesourcery.com>
* remote-utils.c (noack_mode, transport_is_reliable): New globals.
(remote_open): Set or clear transport_is_reliable.
(putpkt_binary): Don't expect acks in noack mode.
(getpkt): Don't send ack/nac in noack mode.
* server.c (handle_general_set): Handle QStartNoAckMode.
(handle_query): If connected by tcp pass QStartNoAckMode+ in
qSupported.
(main): Reset noack_mode on every connection.
* server.h (noack_mode): Declare.
output "thread:TID" in the T stop reply.
* server.c (disable_packet_vCont, disable_packet_Tthread)
(disable_packet_qC, disable_packet_qfThreadInfo): New globals.
(handle_query): If requested, disable support for qC, qfThreadInfo
and qsThreadInfo.
(handle_v_requests): If requested, disable support for vCont.
(gdbserver_show_disableable): New.
(main): Handle --disable-packet and --disable-packet=LIST.
* server.h (disable_packet_vCont, disable_packet_Tthread)
(disable_packet_qC, disable_packet_qfThreadInfo): Declare.
(set_register_cache): Verify that PBUFSIZ is large enough to hold a
full register packet.
* regcache.h (registers_length): Remove prototype.
* server.h (PBUFSIZ): Define to 16384.
* Makefile.in (ppc_linux_tdep_h): New macro.
(powerpc_32l_c, powerpc_altivec32_c, powerpc_altivec32l_c): Likewise.
(powerpc_64l_c, powerpc_altivec64_c, powerpc_altivec64l_c): Likewise.
(powerpc_e500l_c): Likewise.
(ppc-linux-nat.o): Update dependencies.
(ppc-linux-tdep.o): Update dependencies.
(rs6000-tdep.o): Update dependencies.
* ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Remove.
(ppc_linux_svr4_fetch_link_map_offsets): Remove.
(ppc_linux_gregset, ppc_linux_fpregset): Move to ppc-linux-tdep.h
(ppc_supply_reg, ppc_collect_reg): Add prototypes.
(tdesc_powerpc_e500): Remove.
* rs6000.c: Include "features/rs6000/powerpc-altivec32.c"
and "features/rs6000/powerpc-altivec64.c".
(ppc_supply_reg, ppc_collect_reg): Make global.
(variants): Use tdesc_powerpc_32 for "powerpc" and
tdesc_powerpc_altivec64 for "powerpc64".
(_initialize_rs6000_tdep): Initialize AltiVec descriptions.
* ppc-linux-tdep.h: New file.
* ppc-linux-tdep.c: Include "ppc-linux-tdep.c".
Include "features/rs6000/powerpc-32l.c".
Include "features/rs6000/powerpc-altivec32l.c".
Include "features/rs6000/powerpc-64l.c".
Include "features/rs6000/powerpc-altivec64l.c".
Include "features/rs6000/powerpc-e500l.c".
(ppc_linux_supply_gregset): New function.
(ppc_linux_collect_gregset): Handle orig_r3 and trap registers.
(ppc32_linux_gregset): Use ppc_linux_supply_gregset.
(ppc64_linux_gregset): Likewise.
(ppc_linux_sigtramp_cache): Handle orig_r3 and trap registers.
(ppc_linux_trap_reg_p): New function.
(ppc_linux_write_pc): New function.
(ppc_linux_core_read_description): New function.
(ppc_linux_init_abi): Install ppc_linux_write_pc and
ppc_linux_core_read_description. Install orig_r3 and trap
registers if present in the target description.
(_initialize_ppc_linux_tdep): Initialize Linux target descriptions.
* ppc-linux-nat.c: Include "ppc-linux-tdep.h".
(PT_ORIG_R3, PT_TRAP): Define if necessary.
(ppc_register_u_addr): Handle orig_r3 and trap registers.
(fetch_ppc_registers): Likewise.
(store_ppc_registers): Likewise.
(store_register): Likewise.
(ppc_linux_read_description): Check whether AltiVec is supported.
Check whether inferior is 32-bit or 64-bit. Return the appropriate
Linux target description.
* features/Makefile (WHICH): Use rs6000/powerpc-32l and
rs6000/powerpc-altivec32l instead of rs6000/powerpc-32.
Use rs6000/powerpc-64l and rs6000/powerpc-altivec64l instead
of rs6000/powerpc-64. Use rs6000/powerpc-e500l instead of
rs6000/powerpc-e500. Update -expedite variables accordingly.
* features/rs6000/power-spe.xml: Use regnum 73 for "acc".
* features/rs6000/powerpc-32.xml: Do not include power-altivec.xml.
* features/rs6000/powerpc-64.xml: Do not include power-altivec.xml.
* features/rs6000/powerpc-e500.c: Regenerate.
* features/rs6000/powerpc-32.c: Regenerate.
* features/rs6000/powerpc-64.c: Regenerate.
* features/rs6000/power-linux.xml: New file.
* features/rs6000/power64-linux.xml: New file.
* features/rs6000/powerpc-32l.xml: New file.
* features/rs6000/powerpc-altivec32l.xml: New file.
* features/rs6000/powerpc-64l.xml: New file.
* features/rs6000/powerpc-altivec64l.xml: New file.
* features/rs6000/powerpc-e500l.xml: New file.
* features/rs6000/powerpc-32l.c: New (generated) file.
* features/rs6000/powerpc-altivec32l.c: New (generated) file.
* features/rs6000/powerpc-64l.c: New (generated) file.
* features/rs6000/powerpc-altivec64l.c: New (generated) file.
* features/rs6000/powerpc-e500l.xml: New (generated) file.
* regformats/reg-ppc.dat: Remove.
* regformats/reg-ppc64.dat: Remove.
* regformats/rs6000/powerpc-32.dat: Remove.
* regformats/rs6000/powerpc-64.dat: Remove.
* regformats/rs6000/powerpc-e500.dat: Remove.
* regformats/rs6000/powerpc-32l.dat: New (generated) file.
* regformats/rs6000/powerpc-altivec32l.dat: New (generated) file.
* regformats/rs6000/powerpc-64l.dat: New (generated) file.
* regformats/rs6000/powerpc-altivec64l.dat: New (generated) file.
* regformats/rs6000/powerpc-e500l.dat: New (generated) file.
gdbserver/ChangeLog:
* configure.srv (powerpc*-*-linux*): Set srv_regobj to
powerpc-32l.o, powerpc-altivec32l.o, powerpc-e500l.o,
powerpc-64l.o, and powerpc-altivec64l.o.
Remove rs6000/powerpc-32.xml, rs6000/powerpc-64.xml, and
rs6000/powerpc-e500.xml; add rs6000/powerpc-32l.xml,
rs6000/powerpc-altivec32l.xml, rs6000/powerpc-e500l.xml,
rs6000/powerpc-64l.xml, rs6000/powerpc-altivec64l.xml,
rs6000/power-linux.xml, and rs6000/power64-linux.xml
to srv_xmlfiles.
* Makefile.in (reg-ppc.o, reg-ppc.c): Remove, replace by ...
(powerpc-32l.o, powerpc-32l.c): ... these new rules.
(powerpc-32.o, powerpc-32.c): Remove, replace by ...
(powerpc-altivec32l.o, powerpc-altivec32l.c): ... these new rules.
(powerpc-e500.o, powerpc-e500.c): Remove, replace by ...
(powerpc-e500l.o, powerpc-e500l.c): ... these new rules.
(reg-ppc64.o, reg-ppc64.c): Remove, replace by ...
(powerpc-64l.o, powerpc-64l.c): ... these new rules.
(powerpc-64.o, powerpc-64.c): Remove, replace by ...
(powerpc-altivec64l.o, powerpc-altivec64l.c): ... these new rules.
(clean): Update.
* linux-ppc-low.c (init_registers_ppc): Remove, replace by ...
(init_registers_powerpc_32l): ... this new prototype.
(init_registers_powerpc_32): Remove, replace by ...
(init_registers_powerpc_altivec32l): ... this new prototype.
(init_registers_powerpc_e500): Remove, replace by ...
(init_registers_powerpc_e500l): ... this new prototype.
(init_registers_ppc64): Remove, replace by ...
(init_registers_powerpc_64l): ... this new prototype.
(init_registers_powerpc_64): Remove, replace by ...
(init_registers_powerpc_altivec64l): ... this new prototype.
(ppc_num_regs): Set to 73.
(PT_ORIG_R3, PT_TRAP): Define if necessary.
(ppc_regmap, ppc_regmap_e500): Add values for orig_r3 and trap.
(ppc_cannot_store_register): Handle orig_r3 and trap.
(ppc_arch_setup): Update init_registers_... calls.
(ppc_fill_gregset): Handle orig_r3 and trap.
* inferiors.c (clear_inferiors): Reset current_inferior.
srv_regobj. Remove rs6000/powerpc-e500.xml and rs6000/power-spe.xml
from reg_xmlfiles.
* linux-ppc-low.c: Include <elf.h>.
(PPC_FEATURE_HAS_ALTIVEC, PPC_FEATURE_HAS_SPE): Define.
(ppc_hwcap): New global variable.
(ppc_regmap): Remove __SPE__ #ifdef sections.
(ppc_regmap_e500): New global variable.
(ppc_cannot_store_register): Update __SPE__ special case.
(ppc_get_hwcap): New function.
(ppc_arch_setup): Use it to determine whether inferior supports
AltiVec or SPE registers. Set the_low_target.regmap if appropriate.
(ppc_fill_vrregset, ppc_store_vrregset): Define unconditionally.
Do not access registers if target does not support AltiVec.
(ppc_fill_evrregset, ppc_store_evrregset): Define unconditionally.
Do not access registers if target does not support SPE.
(target_regsets): Unconditionally include AltiVec and SPE regsets.
* linux-low.c (disabled_regsets, num_regsets): New.
(use_regsets_p): Delete.
(linux_wait_for_process): Clear disabled_regsets.
(regsets_fetch_inferior_registers): Check and set it.
(regsets_store_inferior_registers): Likewise.
(linux_fetch_registers, linux_store_registers): Do not use
use_regsets_p.
(initialize_low): Allocate disabled_regsets.
* features/Makefile (%.dat): Set xmltarget to the base filename
of the XML source, without subdirectory.
* regformats/rs6000/powerpc-32.dat: Regenerate.
* regformats/rs6000/powerpc-64.dat: Regenerate.
* regformats/rs6000/powerpc-e500.dat: Regenerate.
gdbserver/ChangeLog:
* server.c (get_features_xml): Fix inverted condition.
(handle_query): Always support qXfer:feature:read.
* NEWS: Document "set exec-wrapper" and the gdbserver --wrapper
argument. Gather all gdbserver features together.
* fork-child.c (exec_wrapper): New variable.
(fork_inferior): Use it.
(startup_inferior): Skip an extra trap if using "set exec-wrapper".
(unset_exec_wrapper_command, _initialize_fork_child): New.
* gdb.texinfo (Starting): Document "set exec-wrapper".
(Server): Document gdbserver --wrapper.
* server.c (wrapper_argv): New.
(start_inferior): Handle wrapper_argv. If set, expect an extra
trap.
(gdbserver_usage): Document --wrapper.
(main): Parse --wrapper.
* regformats/reg-ppc.dat: Rename "ps" to "msr".
* regformats/reg-ppc64.dat: Likewise.
gdbserver/ChangeLog:
* configure.srv [powerpc64-*-linux*]: Add all files mentioned for
powerpc-*-linux* to srv_regobj and reg_xmlfiles.
* linux-ppc-low.c (ppc_get_pc): Support bi-arch operation.
(ppc_set_pc): Likewise.
(ppc_arch_setup): New function.
(ppc_fill_gregset): Call ppc_collect_ptrace_register instead
of collect_register.
(the_low_target): Use ppc_arch_setup as arch_setup initializer.
instead of linux-ppc64-low.o.
* linux-ppc64-low.c: Remove file.
* Makefile.in (SFILES): Remove linux-ppc64-low.c.
(linux-ppc64-low.o): Remove rule.
* linux-ppc-low.c (init_registers_ppc64): Add prototype.
(init_registers_powerpc_64): Likewise.
(ppc_regmap): Conditionally define depending on __powerpc64__.
(ppc_cannot_store_register): Do not special-case "fpscr" when
compiled on __powerpc64__.
(ppc_collect_ptrace_register): New function.
(ppc_supply_ptrace_register): New function.
(ppc_breakpoint): Change type to "unsigned int".
(ppc_breakpoint_at): Change type of "insn" to "unsigned int".
(the_low_target): Conditionally provide initializers for the
arch_setup member depending on __powerpc64__. Install
collect_ptrace_register and supply_ptrace_register members.
reg-s390.o and reg-s390x.o.
* linux-low.c (new_inferior): New global variable.
(linux_create_inferior, linux_attach): Set it.
(linux_wait_for_process): Call the_low_target.arch_setup after the
target has stopped for the first time.
(initialize_low): Do not call the_low_target.arch_setup.
* linux-s390-low.c (s390_get_pc): Support bi-arch operation.
(s390_set_pc): Likewise.
(s390_arch_setup): New function.
(the_low_target): Use s390_arch_setup as arch_setup routine.
* regcache.c (realloc_register_cache): New function.
(set_register_cache): Call it for each existing regcache.
* gdb.texinfo (vAttach, vRun): Remove requirement of the stub
killing the inferior when it is already debugging a process.
gdbserver/
* server.c (handle_v_requests): When handling the vRun and vAttach
packets, if already debugging a process, don't kill it. Return an
error instead.
parameter. Set current_process_handle and current_process_id from the
parameters. Clear globals.
(win32_create_inferior): Don't set current_process_handle and
current_process_id here. Instead pass them on the call to
do_initial_child_stuff.
(win32_attach): Likewise.
(win32_clear_inferiors): New.
(win32_kill): Don't close the current process handle or the
current thread handle here. Instead call win32_clear_inferiors.
(win32_detach): Don't open a new handle to the process. Call
win32_clear_inferiors.
(win32_join): Don't rely on current_process_handle; open a new
handle using the process id.
(win32_wait): Call win32_clear_inferiors when the inferior process
has exited.
(linux_kill, linux_detach): Clean up the process list.
* remote-utils.c (remote_open): Improve port number parsing.
(putpkt_binary, input_interrupt): Only send interrupts if the target
is running.
* server.c (extended_protocol): Make static.
(attached): Define earlier.
(exit_requested, response_needed, program_argv): New variables.
(target_running): New.
(start_inferior): Clear attached here.
(attach_inferior): Set attached here.
(require_running): Define.
(handle_query): Use require_running and target_running. Implement
"monitor exit".
(handle_v_attach, handle_v_run): New.
(handle_v_requests): Use require_running. Handle vAttach and vRun.
(gdbserver_usage): Update.
(main): Redo argument parsing. Handle --debug and --multi. Handle
--attach along with other options or after the port. Save
program_argv. Support no initial program. Resynchronize
communication with GDB after an error. Handle "monitor exit".
Use require_running and target_running. Always allow the extended
protocol. Do not error out for Hc0 or Hc-1. Do not automatically
restart in extended mode.
* README: Refer to the GDB manual. Update --attach usage.
* remote.c (struct remote_state): Add cached_wait_status.
(remote_exec_file): New variable.
(PACKET_vAttach, PACKET_vRun): New constants.
(extended_remote_restart): Do not query for status.
(struct start_remote_args): New.
(remote_start_remote): Take it as a second argument. Check
whether the target is running. Issue an error for non-running
non-extended targets. Cache the wait status. Set inferior_ptid
here.
(remote_open_1): Prompt to disconnect non-running targets. Make
sure the target is marked running. Do not set inferior_ptid here.
Update call to remote_start_remote. Do not call remote_check_symbols
if the target is not running.
(remote_detach_1): Rename from remote_detach. Take an EXTENDED
argument. Handle a non-running target.
(remote_detach): Use it.
(extended_remote_detach): New.
(remote_disconnect): Fix typo. Use remoute_mourn_1.
(extended_remote_attach_1, extended_remote_attach)
(extended_async_remote_attach): New.
(remote_vcont_resume): Remove unused variable.
(remote_wait, remote_async_wait): Use any cached wait status.
(putpkt_binary, getpkt): Clear any cached wait status.
(extended_remoute_mourn_1): New.
(extended_remote_mourn): Use it.
(extended_async_remote_mourn, extended_remote_run): New.
(extended_remote_create_inferior_1): New.
(extended_remote_create_inferior): Use it.
(extended_remote_async_create_inferior): Likewise.
(remote_xfer_partial): Skip for non-executing targets.
(init_extended_remote_ops): Set to_detach and to_attach.
(init_extended_async_remote_ops): Likewise. Use
extended_async_remote_mourn.
(_initialize_remote): Register vAttach, vRun, and
set remote exec-file.
* NEWS: Mention vAttach, vRun, and gdbserver extended-remote support.
* gdb.server/ext-attach.c, gdb.server/ext-attach.exp,
gdb.server/ext-run.exp: New files.
* lib/gdbserver-support.exp (gdbserver_download): New.
(gdbserver_start): New. Update gdbserver expected
output.
(gdbserver_spawn): Use them.
(gdbserver_start_extended): New.
* gdb.texinfo (Using the `gdbserver' Program): Add security
warning. Rearrange into subsections and subsubsections. Document
--multi and --debug. Correct --with-sysroot typo. Update --attach
usage. Make load reference clearer. Document monitor exit.
(Remote Configuration): Document set remote exec-file, attach-packet,
and run-packet.
(Packets): Document vAttach and vRun.
reinsert auto-delete breakpoints.
* mem-break.c (struct breakpoint): Change return type of handler to
int.
(set_breakpoint_at): Update handler type.
(reinsert_breakpoint_handler): Return 1 instead of calling
delete_breakpoint.
(reinsert_breakpoint_by_bp): Check for the original breakpoint before
setting a new one.
(check_breakpoints): Delete auto-delete breakpoints and return 2.
* mem-break.h (set_breakpoint_at): Update handler type.
* thread-db.c (thread_db_create_event, thread_db_create_event): Update.
* win32-low.c (auto_delete_breakpoint): New.
(get_child_debug_event): Use it.
(win32_create_inferior): Clear the `attaching' global.
(win32_attach): Set the `attaching' global.
(get_child_debug_event) [_WIN32_WCE]: Stop the inferior when
attaching. Only set a breakpoint at the entry point if not
attaching.
global variables.
(child_add_thread): Minor cleanup.
(child_continue): Resume artificially suspended threads before
calling ContinueDebugEvent.
(suspend_one_thread): New.
(fake_breakpoint_event): New.
(get_child_debug_event): Change return type to int. Check here if
gdb sent an interrupt request. If a soft interrupt was requested,
fake a breakpoint event. Return 0 if there is no event to handle,
and 1 otherwise.
(win32_wait): Don't check here if gdb sent an interrupt request.
Ensure there is a valid event to handle.
(win32_request_interrupt): Add soft interruption method as last
resort.
structure members. Replace `suspend_count' counter by a
`suspended' flag.
* win32-low.c (thread_rec): Update condition of when to get the
context from the inferior. Rely on ContextFlags being set if it
has already been retrieved. Only suspend the inferior thread if
we haven't already. Warn if that fails.
(continue_one_thread): s/suspend_count/suspended/. Only call
ResumeThread once. Warn if that fails.
(add_pid_to_list, pull_pid_from_list): New.
* linux-low.c (PTRACE_SETOPTIONS, PTRACE_GETEVENTMSG)
(PTRACE_O_TRACESYSGOOD, PTRACE_O_TRACEFORK, PTRACE_O_TRACEVFORK)
(PTRACE_O_TRACECLONE, PTRACE_O_TRACEEXEC, PTRACE_O_TRACEVFORKDONE)
(PTRACE_O_TRACEEXIT, PTRACE_EVENT_FORK, PTRACE_EVENT_VFORK)
(PTRACE_EVENT_CLONE, PTRACE_EVENT_EXEC, PTRACE_EVENT_VFORK_DONE)
(PTRACE_EVENT_EXIT, __WALL): Provide default definitions.
(stopped_pids, thread_db_active, must_set_ptrace_flags): New variables.
(using_threads): Always set to 1.
(handle_extended_wait): New.
(add_process): Do not set TID.
(linux_create_inferior): Set must_set_ptrace_flags.
(linux_attach_lwp): Remove TID argument. Do not check using_threads.
Use PTRACE_SETOPTIONS. Call new_thread_notify. Update all callers.
(linux_thread_alive): Rename TID argument to LWPID.
(linux_wait_for_process): Handle unknown processes. Do not use TID.
(linux_wait_for_event): Do not use TID or check using_threads. Update
call to dead_thread_notify. Call handle_extended_wait.
(linux_create_inferior): Use PTRACE_SETOPTIONS.
(send_sigstop): Delete sigstop_sent.
(wait_for_sigstop): Avoid TID.
(linux_supports_tracefork_flag, linux_tracefork_child, my_waitpid)
(linux_test_for_tracefork): New.
(linux_lookup_signals): Use thread_db_active and
linux_supports_tracefork_flag.
(initialize_low): Use thread_db_active and linux_test_for_tracefork.
* linux-low.h (get_process_thread): Avoid TID.
(struct process_ifo): Move thread_known and tid to the end. Remove
sigstop_sent.
(linux_attach_lwp, thread_db_init): Update prototypes.
* server.h (change_inferior_id): Delete prototype.
(add_pid_to_list, pull_pid_from_list): New prototypes.
* thread-db.c (thread_db_use_events): New.
(find_first_thread): Rename to...
(find_one_thread): ...this. Update callers and messages. Do not
call fatal. Check thread_db_use_events. Do not call
change_inferior_id or new_thread_notify.
(maybe_attach_thread): Update. Do not call new_thread_notify.
(thread_db_init): Set thread_db_use_events. Check use_events.
* utils.c (fatal, warning): Correct message prefix.
(win32_create_inferior): Use create_process instead of
CreateProcess. If create_process failed retry appending an ".exe"
suffix. Store the GetLastError result immediatelly after
create_process calls and use it on the call to error.
typedef.
(win32_CloseToolhelp32Snapshot) [_WIN32_WCE]: New global var.
(load_toolhelp) [_WIN32_WCE]: Load TOOLHELP.DLL. Get
CloseToolhelp32Snapshot.
(toolhelp_get_dll_name) [_WIN32_WCE]: Close the snapshot with
CloseToolhelp32Snapshot.
Thiago Bauermann <bauerman@br.ibm.com>
Joseph S. Myers <joseph@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
gdb/
* remote.c (remote_check_symbols): Use
gdbarch_convert_from_func_ptr_addr.
* infcall.c (find_function_addr): Handle function descriptors
without debugging information.
* ppc-linux-tdep.c (ppc_linux_convert_from_func_ptr_addr): Renamed
from ppc64_linux_convert_from_func_ptr_addr. Handle -msecure-plt.
(ppc_linux_init_abi): Always set convert_from_func_ptr_addr.
* solib-svr4.c (solib_break_names): Remove "._dl_debug_state".
(bfd_lookup_symbol): Do not take a SECT_FLAGS argument. Always
allow SEC_CODE and SEC_DATA.
(enable_break): Update calls. Pass current_target to solib_add.
Use gdbarch_convert_from_func_ptr_addr.
gdb/gdbserver/
* remote-utils.c (look_up_one_symbol): Handle 'm' packets.
(thread_db_detach): Typo fix. Call target_mourn_inferior
instead of fixing up proc_handle.
(have_threads_callback, have_threads): New functions.
(thread_db_wait): Remove dead proc_handle.pid check. Only
translate PTIDs if we have registered threads. Check for new
threads if we have none.
(thread_db_create_inferior, thread_db_post_startup_inferior): Delete.
(find_new_threads_callback): Only enable event reporting if TID == 0.
(same_ptid_callback): New.
(thread_db_get_thread_local_address): Check for new threads.
(init_thread_db_ops): Don't set to_attach, to_create_inferior,
or to_post_startup_inferior.
* thread-db.c (thread_db_find_new_threads): Add prototype.
(thread_db_create_event): Check for the main thread before adding
a new thread.
(maybe_attach_thread): Only enable event reporting if TID == 0.
(thread_db_get_tls_address): Check for new threads.
mips64-linux.
* features/sort-regs.xsl: Correct typo.
* regformats/reg-mips.dat, regformats/reg-mips64.dat: Delete.
* regformats/mips-linux.dat, regformats/mips64-linux.dat: New generated
files.
* Makefile.in (clean): Clean new files instead of deleted ones.
(reg-mips.o, reg-mips.c, reg-mips64.o, reg-mips64.c): Delete.
(mips-linux.o, mips-linux.c, mips64-linux.o, mips64-linux.c): New
rules.
* configure.srv: Specify XML files and new regformats for MIPS and
MIPS64 GNU/Linux.
* linux-mips-low.c (mips_num_regs): Set to only used registers.
(mips_regmap): Do not fetch $0. Remove unused registers. Add
an entry for the restart register.
(mips_cannot_fetch_register, mips_cannot_store_register)
(mips_reinsert_addr, mips_fill_fpregset, mips_store_fpregset): Update
register names to match the XML descriptions.
(mips_fill_gregset, mips_store_gregset): Likewise. Handle the
restart register instead of $0.
* spu-linux-nat.c (spu_proc_xfer_spu): Do not return failure when
accessing non-seekable spufs files.
gdbserver/ChangeLog:
* spu-low.c (spu_proc_xfer_spu): Do not return failure when
accessing non-seekable spufs files.
* remote_utils.c (INVALID_DESCRIPTOR): New define.
(remote_desc): Initialize with INVALID_DESCRIPTOR.
(input_interrupt): Expose on USE_WIN32API too. Fix whitespace.
(check_remote_input_interrupt_request): New function.
* server.h (check_remote_input_interrupt_request): Declare.
* win32-low.(winapi_DebugBreakProcess,
winapi_GenerateConsoleCtrlEvent): New typedefs.
(get_child_debug_event): Lower Win32 debug event polling from 1 sec
to 250 ms.
(win32_wait): Check for remote interrupt request
with check_remote_input_interrupt_request.
(win32_request_interrupt): New function.
(win32_target_op): Set request_interrupt to win32_request_interrupt.
debug_registers_used, CONTEXT_EXTENDED_REGISTERS,
CONTEXT_FLOATING_POINT, CONTEXT_DEBUG_REGISTERS,
CONTEXT_DEBUGGER, CONTEXT_DEBUGGER_DR): Delete.
(thread_rec): Get context using the low target.
(child_add_thread): Call thread_added on the low target,
which does the same thing.
(regptr): Delete.
(do_initial_child_stuff): Remove debug registers references.
Set context using the low target. Resume threads after
setting the contexts.
(child_continue): Remove dead variable. Remove debug
registers references.
(child_fetch_inferior_registers): Go through the low target.
(do_child_store_inferior_registers): Remove.
(child_store_inferior_registers): Go through the low target.
(win32_resume): Remove debug registers references.
Set context using the low target.
(handle_exception): Change return type to void. Don't record
context here. Set status to TARGET_WAITKIND_SPURIOUS on a
first chance exception.
(get_child_debug_event): Change return type to void. Remove
goto loop. Always return after waiting for debug event.
(win32_wait): Convert to switch statement. Handle spurious
events.
* win32-i386-low.c (debug_registers_changed,
debug_registers_used): New.
(initial_stuff): Rename to ...
(i386_initial_stuff): ... this. Clear debug registers
state variables.
(store_debug_registers): Delete.
(i386_get_thread_context): New.
(load_debug_registers): Delete.
(i386_set_thread_context): New.
(i386_thread_added): New.
(single_step): Rename to ...
(i386_single_step): ... this.
(do_fetch_inferior_registers): Rename to ...
(i386_fetch_inferior_register): ... this.
(i386_store_inferior_register): New.
(the_low_target): Adapt to new interface.
* win32-arm-low.c (CONTEXT_FLOATING_POINT): Define.
(arm_get_thread_context): New.
(arm_set_thread_context): New.
(regptr): New.
(do_fetch_inferior_registers): Rename to ...
(arm_fetch_inferior_register): ... this.
(arm_store_inferior_register): New.
(arm_wince_breakpoint): Reimplement as unsigned long.
(arm_wince_breakpoint_len): Define.
(the_low_target): Adapt to new interface.
* win32-low.h (target_ops): Remove regmap, store_debug_registers and
load_debug_registers. Add get_thread_context, set_thread_context,
thread_added and store_inferior_register. Rename
fetch_inferior_registers to fetch_inferior_register.
(regptr): Remove declaration.
(winapi_DebugActiveProcessStop): Add WINAPI. typedef as pointer.
(winapi_DebugSetProcessKillOnExit): Likewise.
(win32_create_inferior): Force usage of ansi CreateProcessA.
(win32_attach): Use GETPROCADDRESS.
(win32_detach): Likewise.
* configure.srv [s390-*-linux*, s390x-*-linux*]: Set srv_linux_regsets
and srv_linux_thread_db to yes.
* linux-s390-low.c (s390_fill_gregset): New function.
(target_regsets): Define data structure.
(linux_resume_one_process): Take a siginfo_t *. Update all
callers. Queue it if necessary. Use PTRACE_SETSIGINFO.
(struct pending_signals): Add a siginfo_t.
(linux_wait_for_process): Always set last_status.
(linux_wait_for_event): Use PTRACE_GETSIGINFO.
(linux_queue_one_thread): Use PTRACE_GETSIGINFO.
* linux-low.h (struct process_info): Add last_status.
* server.c (terminal_fd): New variable.
(old_foreground_pgrp): Likewise.
(restore_old_foreground_pgrp): New function.
(start_inferior): Record the terminal file descriptor in terminal_fd
and its original foreground group in old_foreground_pgrp. Register
restore_old_foreground_pgrp with atexit().
* configure.tgt: Build gdbserver for Cygwin and mingw32.
gdb/gdbserver/
* configure.ac: Check for more headers which are missing on
Windows. Automatically supply -lwsock32 and USE_WIN32API.
* configure.srv: Add Cygwin and mingw32.
* remote-utils.c: Don't include headers unconditionally which
are missing on mingw32. Include <winsock.h> for mingw32.
(remote_open): Adjust for mingw32 support. Flush
standard error after writing to it.
(remote_close, putpkt_binary, input_interrupt, block_async_io)
(unblock_async_io, enable_async_io, disable_async_io)
(readchar, getpkt): Update for Winsock support.
(prepare_resume_reply): Expect a protocol signal number.
* server.c: Disable <sys/wait.h> on mingw32.
(start_inferior): Adjust for mingw32 support. Flush
standard error after writing to it.
(attach_inferior): Likewise. Use protocol signal
numbers.
(main): Skip 'D' packet on mingw32. Use protocol signal numbers
and names.
* win32-i386-low.c: New file.
* Makefile.in (XM_CLIBS): Set.
(gdbserver, gdbreplay): Use $(INTERNAL_CFLAGS).
(win32-i386-low.o): New dependency rule.
* linux-low.c (linux_wait): Use target signal numbers.
* target.h (struct target_ops): Doc fix.
* server.h (target_signal_to_name): New prototype.
* gdbreplay.c: Don't include headers unconditionally which
are missing on mingw32. Include <winsock.h> for mingw32.
(remote_close, remote_open): Adjust for Winsock support.
* configure, config.in: Regenerated.
* remote.c (PACKET_qXfer_auxv): New, renamed from PACKET_qPart_auxv.
(remote_supported_packet): Remove #if 0.
(remote_protocol_features): Add qPart:auxv:read.
(remote_unescape_input): New function.
(readchar): Don't mask off the high bit.
(read_frame): Use fputstrn_filtered for packet data.
(getpkt_sane): Return the number of bytes read or -1. Use
fputstrn_unfiltered.
(remote_read_qxfer): New.
(remote_xfer_partial): Use it for TARGET_OBJECT_AUXV.
(_initialize_remote): Update packet registration.
* defs.h (fputstrn_filtered): New prototype.
* utils.c (fputstrn_filtered): New.
* NEWS: Mention qXfer.
gdb/doc/
* gdb.texinfo (OS Information): Update qPart reference to
qXfer.
(Remote configuration): Likewise.
(Overview): Move @cindex to the start of a paragraph. Talk
about binary data encoding.
(Packets): Refer to the overview for the details of the X
packet encoding.
(General Query Packets): Remove qPart description. Add qXfer
description. Add an anchor to qSupported. Correct feature
table title. Add a new feature for qXfer:auxv:read.
(Interrupts): Add a missing parenthesis.
gdb/gdbserver/
* server.c (decode_xfer_read, write_qxfer_response): New.
(handle_query): Take a packet length argument. Handle
qXfer:auxv:read instead of qPart:auxv:read. Mention it in
the qSupported response.
(main): Update call to handle_query.
(putpkt_binary): Renamed from putpkt and adjusted for binary
data.
(putpkt): New wrapper for putpkt_binary.
(readchar): Don't mask off the high bit.
(decode_X_packet): New function.
* server.c (main): Call putpkt_binary if a handler sets the packet
length. Save the length of the incoming packet. Handle 'X'.
* server.h (gdb_byte, remote_escape_output, decode_X_packet): New.
* gdb_proc_service.h: New file.
* linux-i386-low.c, linux-x86-64-low.c, thread-db.c: Use the
new "gdb_proc_service.h".
* proc-service.c: Likewise.
(ps_pglobal_lookup, ps_pdread, ps_pdwrite): Use psaddr_t.
(ps_lgetfpregs, ps_lsetfpregs): Use a void* argument.
* Makefile.in (gdb_proc_service_h): Updated.
* configure, config.in: Regenerated.
is not available. Define HAVE_PTRACE_GETREGS if it is.
* config.in, configure: Regenerated.
* configure.srv: Set srv_linux_regsets for PowerPC and PowerPC64.
* linux-i386-low.c, linux-m68k-low.c: Update to use
HAVE_PTRACE_GETREGS.
* linux-low.c (regsets_fetch_inferior_registers)
(regsets_store_inferior_registers): Only return 0 if we processed
GENERAL_REGS.
* linux-ppc-low.c (ppc_fill_gregset, target_regsets): New.
* linux-ppc64-low.c (ppc_fill_gregset, target_regsets): New.
* linux-cris-low.c: New file with support for CRIS.
* linux-crisv32-low.c: Ditto for CRISv32.
* Makefile.in (SFILES): Add linux-cris-low.c, linux-crisv32-low.c.
(clean): Add reg-cris.c and reg-crisv32.c.
Add linux-cris-low.o, linux-crisv32-low.o, reg-cris.o, reg-cris.c,
reg-crisv32.o, and reg-crisv32.c to make rules.
* configure.srv: Add cris-*-linux* and crisv32-*-linux* to list of
recognized targets.
Take unsigned long arguments for PIDs.
* linux-low.c (add_process, linux_attach_lwp, linux_attach)
(linux_thread_alive, linux_wait_for_event, kill_lwp, send_sigstop)
(wait_for_sigstop, linux_resume_one_process)
(regsets_fetch_inferior_registers, linux_send_signal)
(linux_read_auxv): Likewise. Update the types of variables holding
PIDs. Update format string specifiers.
* linux-low.h (struct process_info, linux_attach_lwp): Likewise.
* remote-utils.c (prepare_resume_reply): Likewise.
* server.c (cont_thread, general_thread, step_thread)
(thread_from_wait, old_thread_from_wait, signal_pid): Change type to
unsigned long.
(handle_query): Update format specifiers.
(handle_v_cont, main): Use strtoul for thread IDs.
* server.h (struct inferior_list_entry): Use unsigned long for ID.
(add_thread, find_inferior_id, change_inferior_id, cont_thread)
(general_thread, step_thread, thread_from_wait)
(old_thread_from_wait): Update.
* target.h (struct thread_resume): Use unsigned long for THREAD.
(struct target_ops): Use unsigned long for arguments to attach and
thread_alive.
* linux-x86-64-low.c (ps_get_thread_area): New.
* linux-low.c: Include <sys/syscall.h>.
(linux_kill_one_process): Don't kill the first thread here.
(linux_kill): Kill the first thread here.
(kill_lwp): New function.
(send_sigstop, linux_send_signal): Use it.
* proc-service.c: Clean up #ifdefs.
(fpregset_info): Delete.
(ps_lgetregs): Update and enable implementation.
(ps_lsetregs, ps_lgetfpregs, ps_lsetfpregs): Remove disabled
implementations.
* remote-utils.c (struct sym_cache, symbol_cache): New.
(input_interrupt): Print a clearer message.
(async_io_enabled): New variable.
(enable_async_io, disable_async_io): Use it. Update comments.
(look_up_one_symbol): Use the symbol cache.
* thread-db.c (thread_db_look_up_symbols): New function.
(thread_db_init): Update comments. Call thread_db_look_up_symbols.
int. Check for and return error from ptrace().
* target.c (read_inferior_memory): Change return type to int. Pass
back return status from the_target->read_memory().
* target.h (struct target_ops): Adapt *read_memory() prototype.
Update comment.
(read_inferior_memory): Adapt prototype.
* server.c (main): Return an error packet if
read_inferior_memory() returns an error.
* target.h (struct target_ops): New member `read_auxv'.
* server.c (handle_query): Handle qPart:auxv:read: query using that.
* linux-low.c (linux_read_auxv): New function.
(linux_target_ops): Initialize `read_auxv' member to that.
Committed by Jim Blandy <jimb@redhat.com>.
* linux-s390-low.c (s390_num_regs): Update.
(s390_regmap): Remove control registers. Use __s390x__ predefine
instead of GPR_SIZE to distiguish s390 and s390x targets.
Committed by Jim Blandy <jimb@redhat.com>.
* config/s390/nm-linux.h: Update comments. Do not include "solib.h".
(KERNEL_U_ADDR, REGISTER_U_ADDR, U_REGS_OFFSET): Remove.
(FETCH_INFERIOR_REGISTERS): Define.
* config/s390/s390.mh (NATDEPFILES): Remove core-aout.o and
core-regset.o.
* config/s390/s390x.mt: Remove.
* config/s390/tm-s390.h: Remove.
* config/s390/tm-linux.h: Do not include "s390/tm-s390.h".
(TARGET_ELF64): Remove.
(SKIP_TRAMPOLINE_CODE): Do not undefine.
* configure.tgt [s390-*-*, s390x-*-*]: Merge into single
s390*-*-* case; always set gdb_target to s390.
* regformats/reg-s390.dat: Remove control registers.
* regformats/reg-s390x.dat: Likewise.
* s390-tdep.h: New file.
* s390-nat.c: Do not include <asm/processor.h> or <value.h>.
Include "inferior.h" and "s390-tdep.h".
Remove private definition of offsetof.
(s390_register_u_addr): Remove.
(regmap_gregset, regmap_fpregset): Define.
(supply_gregset, fill_gregset): Reimplement.
(supply_fpregset, fill_fpregset): Likewise.
(s390_inferior_tid): New function.
(fetch_regs, store_regs, fetch_fpregs, store_fpregs): Likewise.
(fetch_inferior_registers, store_inferior_registers): Likewise.
* s390-tdep.c: Do not define S390_TDEP. Include "defs.h" instead
of <defs.h>. Include "reggroups.h", "regset.h", and "s390-tdep.h".
Global replace of S390_GP0_REGNUM by S390_R0_REGNUM.
Global replace of S390_FP0_REGNUM by S390_F0_REGNUM.
(struct gdbarch_tdep): Define.
(struct s390_register_info): Define.
(s390_register_info): New variable.
(s390_register_name): Reimplement.
(s390_register_type): New function.
(s390_register_raw_size, s390x_register_raw_size): Remove.
(s390_cannot_fetch_register): Remove.
(s390_register_byte): Remove.
(s390_register_virtual_type, s390x_register_virtual_type): Remove.
(s390_dwarf_regmap): New variable.
(s390_dwarf_reg_to_regnum): New function.
(s390_stab_reg_to_regnum): Remove.
(s390_pseudo_register_read, s390_pseudo_register_write): New functions.
(s390x_pseudo_register_read, s390x_pseudo_register_write): Likewise.
(s390_convert_register_p): Likewise.
(s390_register_to_value, s390_value_to_register): Likewise.
(s390_register_reggroup_p): Likewise.
(s390_regmap_gregset, s390x_regmap_gregset, s390_regmap_fpregset,
s390_gregset, s390x_gregset, s390_fpregset): New variables.
(s390_supply_regset, s390_regset_from_core_section): New functions.
(GDB_TARGET_IS_ESAME): Move here from tm-s390.h.
(S390_FPR_SIZE): Likewise.
(S390_GPR_SIZE): Likewise. Redefine in terms of GDB_TARGET_IS_ESAME.
Global replace of DEPRECATED_REGISTER_SIZE by S390_GPR_SIZE.
(S390_NUM_GPRS): Move here from tm-s390.h.
(S390_NUM_FPRS): Likewise.
(s390_in_function_epilogue_p): New function.
(s390_is_sigreturn): Replace S390_PSW_ADDR_SIZE by S390_GPR_SIZE.
Replace S390_PC_REGNUM by S390_PSWA_REGNUM.
(s390_gdbarch_init): Allocate and set up gdbarch_tdep structure.
Replace s390_stab_reg_to_regnum by s390_dwarf_reg_to_regnum.
Replace S390_FP_REGNUM by S390_SP_REGNUM.
Remove calls to:
set_gdbarch_deprecated_max_register_raw_size,
set_gdbarch_deprecated_max_register_virtual_size,
set_gdbarch_deprecated_register_byte,
set_gdbarch_cannot_fetch_register,
set_gdbarch_cannot_store_register,
set_gdbarch_deprecated_register_size,
set_gdbarch_deprecated_register_raw_size,
set_gdbarch_deprecated_register_virtual_size,
set_gdbarch_deprecated_register_virtual_type,
set_gdbarch_deprecated_register_bytes.
Add calls to:
set_gdbarch_num_pseudo_regs,
set_gdbarch_register_type,
set_gdbarch_convert_register_p,
set_gdbarch_register_to_value,
set_gdbarch_value_to_register,
set_gdbarch_register_reggroup_p,
set_gdbarch_regset_from_core_section,
set_gdbarch_pseudo_register_read,
set_gdbarch_pseudo_register_write,
set_gdbarch_in_function_epilogue_p.
* Makefile.in (s390-nat.o, s390-tdep.o): Update dependencies.
(s390_tdep_h): New variable.
(check_removed_breakpoint): Clear pending_is_breakpoint.
(linux_set_resume_request, linux_queue_one_thread)
(resume_status_pending_p): New functions.
(linux_continue_one_thread): Use process->resume.
(linux_resume): Only resume threads if there are no pending events.
* linux-low.h (struct process_info): Add resume request
pointer.
2003-08-08 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.in (FLAGS_TO_PASS): Add DESTDIR.
(install-only): Support DESTDIR.
(uninstall): Likewise.
(install-gdbtk): Likewise.
gdb/doc/
2003-08-08 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.in (install-info): Support DESTDIR.
(install-html): Likewise.
gdb/gdbserver/
2003-08-08 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.in (install-only): Create dest dir. Support DESTDIR.
(uninstall): Support DESTDIR.
mmalloc/
2003-08-08 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.in (install-info): Create dest dir. Support DESTDIR.
(install): Likewise.
PTRACE_XFER_TYPE-sized chunks, not int-sized chunks. Otherwise,
if 'int' is smaller than PTRACE_XFER_TYPE, you end up throwing
away part of the register's value.
the new PID.
(unstopped_p, linux_signal_pid): Remove.
(linux_target_ops): Remove linux_signal_pid.
* remote-utils.c (putpkt, input_interrupt): Use signal_pid
global instead of target method.
* target.h (struct target_ops): Remove signal_pid. Update comment
for create_inferior.
* server.c (signal_pid): New variable.
(create_inferior): Set signal_pid. Block SIGTTOU and SIGTTIN in
gdbserver. Set the child to be the foreground process group.
(attach_inferior): Set signal_pid.
* linux-low.c (regsets_store_inferior_registers): Add free()
at the end of a loop to prevent memory leak.
* linux-x86-64-low.c (x86_64_regmap): Add CS, SS registers.
(X86_64_NUM_GREGS): Count it from the size of x86_64_regmap.
* gdbserver/linux-x86-64-low.c (x86_64_regmap): Make it an array of
byte offsets instead of an array of indexes.
(x86_64_store_gregset, x86_64_store_fpregset): Parameter made const.
* gdbserver/thread-db.c: New file.
* gdbserver/proc-service.c: New file.
* gdbserver/acinclude.m4: New file.
* gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h,
proc-service.o, and thread-db.o.
(linux-low.o): Add USE_THREAD_DB.
* gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T,
HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN.
* gdbserver/aclocal.m4: Regenerated.
* gdbserver/config.in: Regenerated.
* gdbserver/configure: Regenerated.
* gdbserver/configure.in: Check for proc_service.h, sys/procfs.h,
thread_db.h, and linux/elf.h headrs.
Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and
PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB.
Check for -lthread_db and thread support.
* gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS,
PowerPC, and SuperH.
* gdbserver/i387-fp.c: Constify arguments.
* gdbserver/i387-fp.h: Likewise.
* gdbserver/inferiors.c: (struct thread_info): Renamed from
`struct inferior_info'. Remove PID member. Use generic inferior
list header. All uses updated.
(inferiors, signal_pid): Removed.
(all_threads): New variable.
(get_thread): Define.
(add_inferior_to_list): New function.
(for_each_inferior): New function.
(change_inferior_id): New function.
(add_inferior): Removed.
(remove_inferior): New function.
(add_thread): New function.
(free_one_thread): New function.
(remove_thread): New function.
(clear_inferiors): Use for_each_inferior and free_one_thread.
(find_inferior): New function.
(find_inferior_id): New function.
(inferior_target_data): Update argument type.
(set_inferior_target_data): Likewise.
(inferior_regcache_data): Likewise.
(set_inferior_regcache_data): Likewise.
* gdbserver/linux-low.c (linux_bp_reinsert): Remove.
(all_processes, stopping_threads, using_thrads)
(struct pending_signals, debug_threads, pid_of): New.
(inferior_pid): Replace with macro.
(struct inferior_linux_data): Remove.
(get_stop_pc, add_process): New functions.
(linux_create_inferior): Restore SIGRTMIN+1 before calling exec.
Use add_process and add_thread.
(linux_attach_lwp): New function, based on old linux_attach. Use
add_process and add_thread. Set stop_expected for new threads.
(linux_attach): New function.
(linux_kill_one_process): New function.
(linux_kill): Kill all LWPs.
(linux_thread_alive): Use find_inferior_id.
(check_removed_breakpoints, status_pending_p): New functions.
(linux_wait_for_process): Renamed from linux_wait_for_one_inferior.
Update. Use WNOHANG. Wait for cloned processes also. Update process
struct for the found process.
(linux_wait_for_event): New function.
(linux_wait): Use it. Support LWPs.
(send_sigstop, wait_for_sigstop, stop_all_processes)
(linux_resume_one_process, linux_continue_one_process): New functions.
(linux_resume): Support LWPs.
(REGISTER_RAW_SIZE): Remove.
(fetch_register): Use register_size instead. Call supply_register.
(usr_store_inferior_registers): Likewise. Call collect_register.
Fix recursive case.
(regsets_fetch_inferior_registers): Improve error message.
(regsets_store_inferior_registers): Add debugging.
(linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB.
(unstopped_p, linux_signal_pid): New functions.
(linux_target_ops): Add linux_signal_pid.
(linux_init_signals): New function.
(initialize_low): Call it. Initialize using_threads.
* gdbserver/regcache.c (inferior_regcache_data): Add valid
flag.
(get_regcache): Fetch registers lazily. Add fetch argument
and update all callers.
(regcache_invalidate_one, regcache_invalidate): New
functions.
(new_register_cache): Renamed from create_register_cache.
Return the new regcache.
(free_register_cache): Change argument to a void *.
(registers_to_string, registers_from_string): Call get_regcache
with fetch flag set.
(register_data): Make static. Pass fetch flag to get_regcache.
(supply_register): Call get_regcache with fetch flag clear.
(collect_register): Call get_regcache with fetch flag set.
(collect_register_as_string): New function.
* gdbserver/regcache.h: Update.
* gdbserver/remote-utils.c (putpkt): Flush after debug output and use
stderr.
Handle input interrupts while waiting for an ACK.
(input_interrupt): Use signal_pid method.
(getpkt): Flush after debug output and use stderr.
(outreg): Use collect_register_as_string.
(new_thread_notify, dead_thread_notify): New functions.
(prepare_resume_reply): Check using_threads. Set thread_from_wait
and general_thread.
(look_up_one_symbol): Flush after debug output.
* gdbserver/server.c (step_thread, server_waiting): New variables.
(start_inferior): Don't use signal_pid. Update call to mywait.
(attach_inferior): Update call to mywait.
(handle_query): Handle qfThreadInfo and qsThreadInfo.
(main): Don't fetch/store registers explicitly. Use
set_desired_inferior. Support proposed ``Hs'' packet. Update
calls to mywait.
* gdbserver/server.h: Update.
(struct inferior_list, struct_inferior_list_entry): New.
* gdbserver/target.c (set_desired_inferior): New.
(write_inferior_memory): Constify.
(mywait): New function.
* gdbserver/target.h: Update.
(struct target_ops): New signal_pid method.
(mywait): Removed macro, added prototype.
* gdbserver/linux-low.h (regset_func): Removed.
(regset_fill_func, regset_store_func): New.
(enum regset_type): New.
(struct regset_info): Add type field. Use new operation types.
(struct linux_target_ops): stop_pc renamed to get_pc.
Add decr_pc_after_break and breakpoint_at.
(get_process, get_thread_proess, get_process_thread)
(strut process_info, all_processes, linux_attach_lwp)
(thread_db_init): New.
* gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc,
arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset)
(i386_store_fpxregset): Constify.
(target_regsets): Add new kind identifier.
(i386_get_pc): Renamed from i386_stop_pc. Simplify.
(i386_set_pc): Add debugging.
(i386_breakpoint_at): New function.
(the_low_target): Add new members.
* gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc)
(mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr)
(mips_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc)
(ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc)
(sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-x86-64-low.c (target_regsets): Add new kind
identifier.
* gdbserver/linux-low.c (regsets_fetch_inferior_registers),
(regsets_store_inferior_registers): Removed cast to int from
ptrace() calls.
* gdbserver/regcache.h: Added declaration of struct inferior_info.
* gdbserver/linux-low.c (usr_store_inferior_registers): Support
registers which are allowed to fail to store.
* gdbserver/linux-low.h (linux_target_ops): Likewise.
* gdbserver/linux-ppc-low.c (ppc_regmap): Support FPSCR.
(ppc_cannot_store_register): FPSCR may not be storable.
* regformats/reg-ppc.dat: Support FPSCR.
* linux-low.h: Remove obsolete prototypes.
(struct linux_target_ops): New.
(extern the_low_target): New.
* linux-low.c (num_regs, regmap): Remove declarations.
(register_addr): Use the_low_target explicitly.
(fetch_register): Likewise.
(usr_fetch_inferior_registers): Likewise.
(usr_store_inferior_registers): Likewise.
* linux-arm-low.c (num_regs): Remove.
(arm_num_regs): Define.
(arm_regmap): Renamed from regmap, made static.
(arm_cannot_fetch_register): Renamed from cannot_fetch_register,
made static.
(arm_cannot_store_register): Renamed from cannot_store_register,
made static.
(the_low_target): New.
* linux-i386-low.c (num_regs): Remove.
(i386_num_regs): Define.
(i386_regmap): Renamed from regmap, made static.
(i386_cannot_fetch_register): Renamed from cannot_fetch_register,
made static.
(i386_cannot_store_register): Renamed from cannot_store_register,
made static.
(the_low_target): New.
* linux-ia64-low.c (num_regs): Remove.
(ia64_num_regs): Define.
(ia64_regmap): Renamed from regmap, made static.
(ia64_cannot_fetch_register): Renamed from cannot_fetch_register,
made static.
(ia64_cannot_store_register): Renamed from cannot_store_register,
made static.
(the_low_target): New.
* linux-m68k-low.c (num_regs): Remove.
(m68k_num_regs): Define.
(m68k_regmap): Renamed from regmap, made static.
(m68k_cannot_fetch_register): Renamed from cannot_fetch_register,
made static.
(m68k_cannot_store_register): Renamed from cannot_store_register,
made static.
(the_low_target): New.
* linux-mips-low.c (num_regs): Remove.
(mips_num_regs): Define.
(mips_regmap): Renamed from regmap, made static.
(mips_cannot_fetch_register): Renamed from cannot_fetch_register,
made static.
(mips_cannot_store_register): Renamed from cannot_store_register,
made static.
(the_low_target): New.
* linux-ppc-low.c (num_regs): Remove.
(ppc_num_regs): Define.
(ppc_regmap): Renamed from regmap, made static.
(ppc_cannot_fetch_register): Renamed from cannot_fetch_register,
made static.
(ppc_cannot_store_register): Renamed from cannot_store_register,
made static.
(the_low_target): New.
* linux-s390-low.c (num_regs): Remove.
(s390_num_regs): Define.
(s390_regmap): Renamed from regmap, made static.
(s390_cannot_fetch_register): Renamed from cannot_fetch_register,
made static.
(s390_cannot_store_register): Renamed from cannot_store_register,
made static.
(the_low_target): New.
* linux-sh-low.c (num_regs): Remove.
(sh_num_regs): Define.
(sh_regmap): Renamed from regmap, made static.
(sh_cannot_fetch_register): Renamed from cannot_fetch_register,
made static.
(sh_cannot_store_register): Renamed from cannot_store_register,
made static.
(the_low_target): New.
* linux-x86-64-low.c (x86_64_regmap): Renamed from regmap.
(the_low_target): New.