This patch fixes some issues with debug register handling for the powerpc
linux native target.
Currently, the target methods for installing and removing hardware
breakpoints and watchpoints in ppc-linux-nat.c affect all threads known to
linux-nat, including threads of different processes.
This patch changes ppc-linux-nat.c so that only the process of
inferior_ptid is affected by these target methods, as GDB expects.
This is done in the same way as various other architectures. The
install/remove target methods only register a hardware breakpoint or
watchpoint, and then send a stop signal to the threads. The debug
registers are only changed with ptrace right before each thread is next
resumed, using low_prepare_to_resume.
There are two interfaces to modify debug registers for linux running on
powerpc, with different sets of ptrace requests:
- PPC_PTRACE_GETHWDBGINFO, PPC_PTRACE_SETHWDEBUG, and
PPC_PTRACE_DELHWDEBUG.
Or
- PTRACE_SET_DEBUGREG and PTRACE_GET_DEBUGREG
The first set (HWDEBUG) is the more flexible one and allows setting
watchpoints with a variable watched region length and, for certain
embedded processors, multiple types of debug registers (e.g. hardware
breakpoints and hardware-assisted conditions for watchpoints).
Currently, server processors only provide one watchpoint. The second one
(DEBUGREG) only allows setting one debug register, a watchpoint, so we
only use it if the first one is not available.
The HWDEBUG interface handles debug registers with slot numbers. Once a
hardware watchpoint or breakpoint is installed (with
PPC_PTRACE_SETHWDEBUG), ptrace returns a slot number. This slot number
can then be used to remove the watchpoint or breakpoint from the inferior
(with PPC_PTRACE_DELHWDEBUG). The first interface also provides a
bitmask of available debug register features, which can be obtained with
PPC_PTRACE_GETHWDBGINFO.
When GDB first tries to use debug registers, we try the first interface
with a ptrace call, and if it isn't available, we fall back to the second
one, if available. We use EIO as an indicator that an interface is not
available in the kernel. For simplicity, with any other error we
immediately assume no interface is available. Unfortunately this means
that if a process is killed by a signal right before we try to detect the
interface, we might get an ESRCH, which would prevent debug registers to
be used in the GDB session. However, it isn't clear that we can safely
raise an exception and try again in the future in all the contexts where
we try to detect the interface.
If the HWDEBUG interface works but provides no feature bits, the target
falls back to the DEBUGREG interface. When the kernel is configured
without CONFIG_HW_BREAKPOINTS (selected by CONFIG_PERF_EVENTS), there is
a bug that causes watchpoints installed with the HWDEBUG interface not to
trigger. When this is the case, the feature bits will be zero, which is
used as the indicator to fall back to the DEBUGREG interface. This isn't
ideal, but has always been the behavior of GDB before this patch, so I
decided not to change it.
A flag indicates for each thread if its debug registers need to be
updated the next time it is resumed. The flag is set whenever the upper
layers request or remove a hardware watchpoint or breakpoint, or when a
new thread is detected. Because some kernel configurations disable
watchpoints after they are hit, we also use the last stop reason of the
LWP to determine whether we should update the debug registers. It isn't
clear that this is also true of BookE hardware breakpoints, but we also
check their stop reason to be on the safe side, since it doesn't hurt.
A map from process numbers to hardware watchpoint or breakpoint objects
keeps track of what has been requested by the upper layers of GDB, since
for GDB installing a hardware watchpoint or breakpoint means doing so for
the whole process.
When using the HWDEBUG interface we also have to keep track of which
slots were last installed in each thread with a map from threads to the
slots, so that they can be removed when needed. When resuming a thread,
we remove all the slots using this map, then we install all the hardware
watchpoints and breakpoints from the per-process map of requests, and
then update the per-thread map accordingly.
This per-thread state is also used for copying the debug register state
after a fork or a clone is detected. The kernel might do this depending
on the configuration. Recent kernels running on server processors that
were configured with CONFIG_PERF_EVENTS (and therefore
CONFIG_HW_BREAKPOINTS) don't copy debug registers across forks and
clones. Recent kernels without CONFIG_HW_BREAKPOINTS copy this state. I
believe that on embedded processors (e.g. a ppc440) the debug register
state is copied, but I haven't been able to test this. To handle both
cases, the per-thread state is always copied when forks and clones are
detected, and when we resume the thread and delete the debug register
slots before updating them, we ignore ENOENT errors.
We don't need to handle this when using the DEBUGREG interface since it
only allows one hardware watchpoint and doesn't return slot numbers, we
just set or clear this watchpoint when needed.
Since we signal running threads to stop after a request is processed, so
that we can update their debug registers when they are next resumed,
there will be a time between signalling the threads and their stop during
which the debug registers haven't been updated, even if the target
methods completed.
The tests in gdb.threads/watchpoint-fork.exp no longer fail with this
patch.
gdb/ChangeLog:
2020-03-30 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* ppc-linux-nat.c: Include <algorithm>, <unordered_map>, and
<list>. Remove inclusion of observable.h.
(PPC_DEBUG_CURRENT_VERSION): Move up define.
(struct arch_lwp_info): New struct.
(class ppc_linux_dreg_interface): New class.
(struct ppc_linux_process_info): New struct.
(struct ppc_linux_nat_target) <low_delete_thread, low_new_fork>
<low_new_clone, low_forget_process, low_prepare_to_resume>
<copy_thread_dreg_state, mark_thread_stale>
<mark_debug_registers_changed, register_hw_breakpoint>
<clear_hw_breakpoint, register_wp, clear_wp>
<can_use_watchpoint_cond_accel, calculate_dvc, check_condition>
<num_memory_accesses, get_trigger_type>
<create_watchpoint_request, hwdebug_point_cmp>
<init_arch_lwp_info, get_arch_lwp_info>
<low_stopped_by_watchpoint, low_stopped_data_address>: Declare as
methods.
<struct ptid_hash>: New inner struct.
<m_dreg_interface, m_process_info, m_installed_hw_bps>: Declare
members.
(saved_dabr_value, hwdebug_info, max_slots_number)
(struct hw_break_tuple, struct thread_points, ppc_threads)
(have_ptrace_hwdebug_interface)
(hwdebug_find_thread_points_by_tid)
(hwdebug_insert_point, hwdebug_remove_point): Remove.
(ppc_linux_nat_target::can_use_hw_breakpoint): Use
m_dreg_interface, remove call to PTRACE_SET_DEBUGREG.
(ppc_linux_nat_target::region_ok_for_hw_watchpoint): Add comment,
use m_dreg_interface.
(hwdebug_point_cmp): Change to...
(ppc_linux_nat_target::hwdebug_point_cmp): ...this method. Use
reference arguments instead of pointers.
(ppc_linux_nat_target::ranged_break_num_registers): Use
m_dreg_interface.
(ppc_linux_nat_target::insert_hw_breakpoint): Add comment, use
m_dreg_interface. Call register_hw_breakpoint.
(ppc_linux_nat_target::remove_hw_breakpoint): Add comment, use
m_dreg_interface. Call clear_hw_breakpoint.
(get_trigger_type): Change to...
(ppc_linux_nat_target::get_trigger_type): ...this method. Add
comment.
(ppc_linux_nat_target::insert_mask_watchpoint): Update comment,
use m_dreg_interface. Call register_hw_breakpoint.
(ppc_linux_nat_target::remove_mask_watchpoint): Update comment,
use m_dreg_interface. Call clear_hw_breakpoint.
(can_use_watchpoint_cond_accel): Change to...
(ppc_linux_nat_target::can_use_watchpoint_cond_accel): ...this
method. Update comment, use m_dreg_interface and
m_process_info.
(calculate_dvc): Change to...
(ppc_linux_nat_target::calculate_dvc): ...this method. Use
m_dreg_interface.
(num_memory_accesses): Change to...
(ppc_linux_nat_target::num_memory_accesses): ...this method.
(check_condition): Change to...
(ppc_linux_nat_target::check_condition): ...this method.
(ppc_linux_nat_target::can_accel_watchpoint_condition): Update
comment, use m_dreg_interface.
(create_watchpoint_request): Change to...
(ppc_linux_nat_target::create_watchpoint_request): ...this
method. Use m_dreg_interface.
(ppc_linux_nat_target::insert_watchpoint): Add comment, use
m_dreg_interface. Call register_hw_breakpoint or register_wp.
(ppc_linux_nat_target::remove_watchpoint): Add comment, use
m_dreg_interface. Call clear_hw_breakpoint or clear_wp.
(ppc_linux_nat_target::low_forget_process)
(ppc_linux_nat_target::low_new_fork)
(ppc_linux_nat_target::low_new_clone)
(ppc_linux_nat_target::low_delete_thread)
(ppc_linux_nat_target::low_prepare_to_resume): New methods.
(ppc_linux_nat_target::low_new_thread): Remove previous logic,
only call mark_thread_stale.
(ppc_linux_thread_exit): Remove.
(ppc_linux_nat_target::stopped_data_address): Change to...
(ppc_linux_nat_target::low_stopped_data_address): This. Add
comment, use m_dreg_interface and m_thread_hw_breakpoints.
(ppc_linux_nat_target::stopped_by_watchpoint): Change to...
(ppc_linux_nat_target::stopped_by_watchpoint): This. Add
comment. Call low_stopped_data_address.
(ppc_linux_nat_target::watchpoint_addr_within_range): Use
m_dreg_interface.
(ppc_linux_nat_target::masked_watch_num_registers): Use
m_dreg_interface.
(ppc_linux_nat_target::copy_thread_dreg_state)
(ppc_linux_nat_target::mark_thread_stale)
(ppc_linux_nat_target::mark_debug_registers_changed)
(ppc_linux_nat_target::register_hw_breakpoint)
(ppc_linux_nat_target::clear_hw_breakpoint)
(ppc_linux_nat_target::register_wp)
(ppc_linux_nat_target::clear_wp)
(ppc_linux_nat_target::init_arch_lwp_info)
(ppc_linux_nat_target::get_arch_lwp_info): New methods.
(_initialize_ppc_linux_nat): Remove observer callback.
This patch adds a low_new_clone method to linux_nat_target, called after
a PTRACE_EVENT_CLONE is detected, similar to how low_new_fork is called
after PTRACE_EVENT_(V)FORK.
This is useful for targets that need to copy state associated with a
thread that is inherited across clones.
gdb/ChangeLog:
2020-03-30 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* linux-nat.h (low_new_clone): New method.
* linux-nat.c (linux_handle_extended_wait): Call low_new_clone.
When running test-case gdb.base/c-linkage-name.exp with target board
cc-with-gdb-index.exp, I see:
...
FAIL: gdb.base/c-linkage-name.exp: maint info psymtab: c-linkage-name-2.c: no
FAIL: gdb.base/c-linkage-name.exp: maint info psymtab: c-linkage-name-2.c: yes
...
The FAILs are due to the fact that partial symbol tables are not generated for
indexed executables.
When running the same test-case with target board readnow.exp, I see:
...
FAIL: gdb.base/c-linkage-name.exp: maint info psymtab: c-linkage-name-2.c: no
FAIL: gdb.base/c-linkage-name.exp: print symada__cS before partial symtab \
expansion
FAIL: gdb.base/c-linkage-name.exp: maint info psymtab: c-linkage-name-2.c: yes
...
The "maint info psymtab" FAILs are also due to fact that the partial symbol
tables not generated, but in this case it's because the symtabs are fully
expanded upon load due to using -readnow. The "print symada__cS before
partial symtab expansion" test intends to test the state before symbol table
expansion, and with -readnow that's not possible.
Mark these FAILs as UNSUPPORTED.
Tested on x86_64-linux, with native, and target boards cc-with-gdb-index.exp,
cc-with-debug-names.exp and readnow.exp.
gdb/testsuite/ChangeLog:
2020-03-30 Tom de Vries <tdevries@suse.de>
* gdb.base/c-linkage-name.exp: Use readnow call to mark a test
unsupported.
(verify_psymtab_expanded): Move ...
* lib/gdb.exp (verify_psymtab_expanded): ... here. Add unsupported
test.
(readnow): New proc.
As I am trying to understand the dynamic of partial_symtab::read_symtab
and partial_symtab::expand_psymtab, I think that renaming these
functions helps make it clear that they are effectively implementations
of the partial_symtab::expand_psymtab method.
gdb/ChangeLog:
* dbxread.c (dbx_psymtab_to_symtab_1): Rename to...
(dbx_expand_psymtab): ... this.
(start_psymtab): Update.
* mdebugread.c (psymtab_to_symtab_1): Rename to...
(mdebug_expand_psymtab): ... this.
(parse_partial_symbols): Update.
(new_psymtab): Update.
* xcoffread.c (xcoff_psymtab_to_symtab_1): Rename to...
(xcoff_expand_psymtab): ... this.
(xcoff_start_psymtab): Update.
This method calls partial_symtab::expand_psymtab on all dependencies of
a psymtab. Given that there is also a partial_symtab::read_symtab
method, I think it would be clearer to name this function
expand_dependencies, rather than read_dependencies.
gdb/ChangeLog:
* psympriv.h (partial_symtab) <read_dependencies>: Rename to...
<expand_dependencies>: ... this.
* psymtab.c (partial_symtab::read_dependencies): Rename to...
(partial_symtab::expand_dependencies): ... this.
* dwarf2/read.c (dwarf2_include_psymtab) <expand_psymtab>:
Update.
(dwarf2_psymtab::expand_psymtab): Update.
* dbxread.c (dbx_psymtab_to_symtab_1): Update.
* mdebugread.c (psymtab_to_symtab_1): Update.
* xcoffread.c (xcoff_psymtab_to_symtab_1): Update.
This function does not add much value, compared to calling the method on
the psymtab_storage object directly.
gdb/ChangeLog:
* psympriv.h (discard_psymtab): Remove.
* dbxread.c (dbx_end_psymtab): Update.
* xcoffread.c (xcoff_end_psymtab): Update.
I noticed that a comment in dwarf2/attribute.h still referred to
dwarf2_get_attr_constant_value. However, this is now a method on
struct attribute.
gdb/ChangeLog
2020-03-28 Tom Tromey <tom@tromey.com>
* dwarf2/attribute.h (struct attribute) <form_is_constant>: Update
comment.
I noticed that the start of read_attribute_reprocess had the wrong
formatting. This patch fixes it.
gdb/ChangeLog
2020-03-28 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (read_attribute_reprocess): Fix formatting.
Since COMMONPAGESIZE is set for other Solaris targets, including x86-64
Solaris, also set COMMONPAGESIZE for i386 Solaris to fix
FAIL: Build pr20995-2.so
FAIL: pr20995-2
PR 25732
* emulparams/elf_i386_ldso.sh (COMMONPAGESIZE): New.
* testsuite/ld-elf/shared.exp:Don't xfail pr20995-2 tests for
Solaris.
Last patch didn't manage to xfail spu due to clear_xfail *-*-*elf*.
Clearing *-*-*elf* dates back to a time when we had rather a lot more
setup_xfail patterns, so limiting it to hppa*-*-*elf*. Also,
mips-*-irix ought to have been mips-*-irix* and I'm having second
thoughts about xfailing mips and hiding what looks like a problem: If
the mips target is supposed to emit names for local section symbols
and does so for objcopy, why isn't it doing the same for ld? Also,
lots more mips targets would be subject to this test failing. So I'm
backing out those xfails and leaving it to someone more knowledgeable
about mips.
* testsuite/binutils-all/objcopy.exp (objcopy_test): Only
clear_xfail hppa*-*-*elf*. Revert mips xfails.
xfails spu due to a note section getting a different vma, and some
mips targets that give section symbols a name string. I added -p
for the executable test in an attempt to fix all the pe target fails,
but that doesn't preserve the date/time for some reason.
* testsuite/binutils-all/objcopy.exp (objcopy_test): Move xfails
from here to calls. Remove "m8*-*-*" entry. Don't xfail tic54x
but do xfail spu, mipstx39 and mips-sgi-irix for the executable
test. Pass "-p" to objcopy for the executable test.
GetModuleFileNameEx might also return the 64bit system directory for 32bit
programs even for a 32bit gdb:
(gdb) info sharedlibrary
From To Syms Read Shared Object Library
0x779d0000 0x77b34d20 Yes (*) C:\Windows\SysWOW64\ntdll.dll
0x76850000 0x7694ad9c Yes (*) C:\Windows\syswow64\kernel32.dll
0x75421000 0x75466a18 Yes (*) C:\Windows\syswow64\KernelBase.dll
0x6fbe1000 0x6fcca1c0 Yes (*) C:\Windows\system32\dbghelp.dll
0x76d31000 0x76ddb2c4 Yes (*) C:\Windows\syswow64\msvcrt.dll
So this makes the path conversion for all 32bit programs.
gdb/ChangeLog:
2020-03-27 Hannes Domani <ssbssa@yahoo.de>
* windows-nat.c (windows_add_all_dlls): Fix system dll paths.
Since Solaris ld.so.1 doesn't support ifunc and never will, skip some
x86 IFUNC tests for Solaris.
PR 25732
* testsuite/ld-ifunc/ifunc-23a-x86.d: Add notarget for Solaris.
* testsuite/ld-ifunc/ifunc-24a-x86.d: Likewise.
* testsuite/ld-ifunc/ifunc-25a-x86.d: Likewise.
Run shellcheck (version 0.4.7) on the create-version.sh script, and
resolve the issues it highlighter - they all seemed reasonable.
gdbsupport/ChangeLog:
* create-version.sh: Resolve issues highlighted by shellcheck.
binutils/ChangeLog:
2020-03-27 Jozef Lawrynowicz <jozef.l@mittosystems.com>
PR binutils/25662
* testsuite/binutils-all/objcopy.exp (objcopy_test): Add argument to
specify whether an object file or executable should be built and tested.
Change test names to report whether an object file or executable is
being tested.
* testsuite/binutils-all/pr25662.ld: New test.
* testsuite/binutils-all/pr25662.s: New test.
This patch fixes a leak of qualified_name caused by 4c83662712 and a
double free introduced by fd486f32d1. Not breaking out of the loop
results in an error: "failed to seek to next archive header". That's
slightly better than silently preventing the possibility of endless
loops.
* readelf.c (process_archive): Don't double free qualified_name.
Don't break out of loop with "negative" archive_file_size, just
set file offset to max.
FreeBSD's kernel recently added a new ELF auxiliary vector entry
holding a mask of software features provided by the kernel. This
change fixes 'info auxv' to report the name and description for this
vector entry instead of '???'.
include/ChangeLog:
* elf/common.h (AT_FREEBSD_BSDFLAGS): Define.
gdb/ChangeLog:
* fbsd-tdep.c (fbsd_print_auxv_entry): Handle AT_FREEBSD_BSDFLAGS.
This changes dwarf2_get_ref_die_offset and
dwarf2_get_attr_constant_value to be methods on struct attribute.
gdb/ChangeLog
2020-03-26 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (handle_data_member_location, dwarf2_add_field)
(mark_common_block_symbol_computed, read_tag_string_type)
(attr_to_dynamic_prop, read_subrange_type): Update.
(dwarf2_get_ref_die_offset, dwarf2_get_attr_constant_value): Move
to be methods on struct attribute.
(skip_one_die, process_imported_unit_die, read_namespace_alias)
(read_call_site_scope, partial_die_info::read)
(partial_die_info::read, lookup_die_type, follow_die_ref):
Update.
* dwarf2/attribute.c (attribute::get_ref_die_offset): New method,
from dwarf2_get_ref_die_offset.
(attribute::constant_value): New method, from
dwarf2_get_attr_constant_value.
* dwarf2/attribute.h (struct attribute) <get_ref_die_offset>:
Declare method.
<constant_value>: New method.
This moves the DWARF debugging functions that stringify various
constants to a new file, dwarf2/stringify.c.
gdb/ChangeLog
2020-03-26 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (dwarf_unit_type_name, dwarf_tag_name)
(dwarf_attr_name, dwarf_form_name, dwarf_bool_name)
(dwarf_type_encoding_name): Move to stringify.c.
* Makefile.in (COMMON_SFILES): Add dwarf2/stringify.c.
* dwarf2/stringify.c: New file.
* dwarf2/stringify.h: New file.
This rewrites the two new die_info methods to iterate over attributes
rather than to do two separate searches.
gdb/ChangeLog
2020-03-26 Tom Tromey <tom@tromey.com>
* dwarf2/die.h (struct die_info) <addr_base, ranges_base>:
Rewrite.
This changes lookup_addr_base and lookup_ranges_base to be methods on
die_info.
gdb/ChangeLog
2020-03-26 Tom Tromey <tom@tromey.com>
* dwarf2/die.h (struct die_info) <addr_base, ranges_base>: New
methods.
* dwarf2/read.c (lookup_addr_base): Move to die.h.
(lookup_ranges_base): Likewise.
(read_cutu_die_from_dwo, read_full_die_1): Update.
The sibling_die helper function does not seem to add much value,
considering that many other fields of die_info are directly accessed.
So, this removes it.
gdb/ChangeLog
2020-03-26 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (read_import_statement, read_file_scope)
(read_type_unit_scope, inherit_abstract_dies, read_func_scope)
(read_lexical_block_scope, read_call_site_scope)
(dwarf2_get_subprogram_pc_bounds, get_scope_pc_bounds)
(handle_struct_member_die, process_structure_scope)
(update_enumeration_type_from_children)
(process_enumeration_scope, read_array_type, read_common_block)
(read_namespace, read_module, read_subroutine_type): Update.
(sibling_die): Remove.
This changes dwarf2_attr_no_follow to be a method on die_info.
gdb/ChangeLog
2020-03-26 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (lookup_addr_base, lookup_ranges_base)
(build_type_psymtabs_reader, read_structure_type)
(read_enumeration_type, read_full_die_1): Update.
(dwarf2_attr_no_follow): Move to die.h.
* dwarf2/die.h (struct die_info) <attr>: New method.
This removes dwarf2_cu::base_known, changing base_address to be a
gdb::optional.
gdb/ChangeLog
2020-03-26 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (struct dwarf2_cu) <base_known>: Remove.
<base_address>: Now an optional.
(dwarf2_find_base_address, dwarf2_rnglists_process)
(dwarf2_ranges_process, fill_in_loclist_baton)
(dwarf2_symbol_mark_computed): Update.
This moves struct die_info to a new header, dwarf2/die.h.
gdb/ChangeLog
2020-03-26 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (struct die_info): Move to die.h.
* dwarf2/die.h: New file.
This moves some more code out of read.c and into line-header.c.
dwarf_decode_line_header is split into two -- the part remaining in
read.c handles interfacing to the dwarf2_cu; while the part in
line-header.c (more or less) purely handles the actual decoding.
gdb/ChangeLog
2020-03-26 Tom Tromey <tom@tromey.com>
* dwarf2/line-header.h (dwarf_decode_line_header): Declare.
* dwarf2/read.c
(dwarf2_statement_list_fits_in_line_number_section_complaint):
Move to line-header.c.
(read_checked_initial_length_and_offset, read_formatted_entries):
Likewise.
(dwarf_decode_line_header): Split into two.
* dwarf2/line-header.c
(dwarf2_statement_list_fits_in_line_number_section_complaint):
Move from read.c.
(read_checked_initial_length_and_offset, read_formatted_entries):
Likewise.
(dwarf_decode_line_header): New function, split from read.c.
This changes read_indirect_line_string to be a method on
dwarf2_per_objfile. This makes it a bit simpler to share between
files.
gdb/ChangeLog
2020-03-26 Tom Tromey <tom@tromey.com>
* dwarf2/read.h (struct dwarf2_per_objfile) <read_line_string>:
Declare method.
* dwarf2/read.c (read_attribute_value): Update.
(dwarf2_per_objfile::read_line_string): Rename from
read_indirect_line_string.
(read_formatted_entries): Update.
One spot in dwarf_decode_macro_bytes could use the existing "objfile"
local variable.
gdb/ChangeLog
2020-03-26 Tom Tromey <tom@tromey.com>
* dwarf2/macro.c (dwarf_decode_macro_bytes): Use objfile local
variable.
This changes the DWARF macro reader to use a const dwarf2_section_info.
gdb/ChangeLog
2020-03-26 Tom Tromey <tom@tromey.com>
* dwarf2/macro.h (dwarf_decode_macros): Make section parameter
const.
* dwarf2/macro.c (skip_form_bytes, skip_unknown_opcode)
(dwarf_decode_macro_bytes, dwarf_decode_macros): Make section
parameter const.
This changes a few line_header methods to be const. In some cases, a
const overload is added.
gdb/ChangeLog
2020-03-26 Tom Tromey <tom@tromey.com>
* dwarf2/line-header.h (struct line_header) <is_valid_file_index,
file_names_size, file_full_name, file_file_name>: Use const.
<file_name_at, file_names>: Add const overload.
* dwarf2/line-header.c (line_header::file_file_name)
(line_header::file_full_name): Update.
This moves some more code out of dwarf2/read.c, introducing new files
dwarf2/macro.c and dwarf2/macro.h.
gdb/ChangeLog
2020-03-26 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (dwarf2_macro_malformed_definition_complaint)
(macro_start_file, consume_improper_spaces)
(parse_macro_definition, skip_form_bytes, skip_unknown_opcode)
(dwarf_parse_macro_header, dwarf_decode_macro_bytes)
(dwarf_decode_macros): Move to macro.c.
* dwarf2/macro.c: New file.
* dwarf2/macro.h: New file.
* Makefile.in (COMMON_SFILES): Add dwarf2/macro.c.
This moves a string-reading function to be a method on
dwarf2_section_info, and then updates the users.
gdb/ChangeLog
2020-03-26 Tom Tromey <tom@tromey.com>
* dwarf2/section.h (struct dwarf2_section_info) <read_string>: New
method.
* dwarf2/section.c: New method. From
read_indirect_string_at_offset_from.
* dwarf2/read.c (mapped_debug_names::namei_to_name): Update.
(read_indirect_string_at_offset_from): Move to section.c.
(read_indirect_string_at_offset): Rewrite.
(read_indirect_line_string_at_offset): Remove.
(read_indirect_string, read_indirect_line_string)
(dwarf_decode_macro_bytes): Update.
This splits dwarf_decode_macros into two overloads -- one that's
suitable for splitting into a separate file, and one that finds the
correct section and should remain in dwarf2/read.c.
gdb/ChangeLog
2020-03-26 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (dwarf_decode_macros): Split into two overloads.
This changes dwarf_decode_macro_bytes to accept a buildsym_compunit
rather than a dwarf2_cu. This enables some subsequent changes; and
also makes the function accept a "more specific" parameter.
gdb/ChangeLog
2020-03-26 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (macro_start_file): Change "cu" parameter to
"builder".
(dwarf_decode_macro_bytes): Likewise. Add dwarf2_per_objfile
parameter.
(dwarf_decode_macros): Update.
This changes read_indirect_string_from_dwz to be a method on the
dwz_file, and adds a new dwarf2/dwz.c file.
gdb/ChangeLog
2020-03-26 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (read_attribute_value): Update.
(read_indirect_string_from_dwz): Move to dwz.c; change into
method.
(dwarf_decode_macro_bytes): Update.
* dwarf2/dwz.h (struct dwz_file) <read_string>: Declare method.
* dwarf2/dwz.c: New file.
* Makefile.in (COMMON_SFILES): Add dwz.c.
This patch also had some problems. Calculation of maxlen was wrong,
and the insn arg loop needed rearranging to work with a correct length.
* disassemble.h (opcodes_assert): Declare.
(OPCODES_ASSERT): Define.
* disassemble.c: Don't include assert.h. Include opintl.h.
(opcodes_assert): New function.
* h8300-dis.c (bfd_h8_disassemble_init): Use OPCODES_ASSERT.
(bfd_h8_disassemble): Reduce size of data array. Correctly
calculate maxlen. Omit insn decoding when insn length exceeds
maxlen. Exit from nibble loop when looking for E, before
accessing next data byte. Move processing of E outside loop.
Replace tests of maxlen in loop with assertions.
git commit beea5cc1bc fixed one use of an uninitialised value but
ignored another one a few lines later.
* arc-dis.c (find_format): Init needs_limm. Simplify use of limm.
