2016-08-26 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (v7m_psrs): Add MSPLIM, PSPLIM, MSPLIM_NS,
PSPLIM_NS, PRIMASK_NS, BASEPRI_NS, FAULTMASK_NS, CONTROL_NS, SP_NS and
their lowecase counterpart special registers. Write register
identifier in hex.
* testsuite/gas/arm/archv8m-cmse-msr.s: Reorganize tests per
operation, special register and then case. Use different register for
each operation. Add tests for new special registers.
* testsuite/gas/arm/archv8m-cmse-msr-base.d: Adapt expected result
accordingly.
* testsuite/gas/arm/archv8m-cmse-msr-main.d: Likewise.
* testsuite/gas/arm/archv8m-main-dsp-4.d: Likewise.
opcodes/
* arm-dis.c (psr_name): Use hex as case labels. Add detection for
MSPLIM, PSPLIM, MSPLIM_NS, PSPLIM_NS, PRIMASK_NS, BASEPRI_NS,
FAULTMASK_NS, CONTROL_NS and SP_NS special registers.
parse_aarch64_imm_float was accepting -0.0 even though that's not
a valid immediate for any instruction. The FPIMM0 caller rejected
it, but the FPIMM one would silently treat it as -2.0.
This patch rejects -0.0 and adds testcases to illegal.[sd].
Before the patch, the final error emitted for illegal.s was:
Error: cannot do 16-byte relocation
which was matched by:
[^:]*:569: Error: .*
The error was reported against the last line of the file rather than
the instruction that required the reloc. Adding more instructions
meant that the line number also changed.
Reporting against the wrong line isn't good from a QoI perspective
but isn't what I'm trying to fix here. Until it's fixed, I thought
it would be better to adjust the match to be against an end-of-file
comment rather than against whatever the last instruction happens to be.
gas/
* config/tc-aarch64.c (parse_aarch64_imm_float): Reject -0.0.
* testsuite/gas/aarch64/illegal.s, testsuite/gas/aarch64/illegal.l:
Add tests for -0.0. Add an end-of-file comment.
PR gas/20429
* config/tc-arm.c (do_vfp_nsyn_push): Check that no more than 16
registers are pushed.
(do_vfp_nsyn_pop): Check that no more than 16 registers are
popped.
* testsuite/gas/arm/pr20429.s: New test.
* testsuite/gas/arm/pr20429.d: New test driver.
* testsuite/gas/arm/pr20429.1: Expected error output.
PR gas/20364
* config/tc-aarch64.c (s_ltorg): Change the mapping state after
aligning the frag.
(aarch64_init): Treat rs_align frags in code sections as
containing code, not data.
* testsuite/gas/aarch64/pr20364.s: New test.
* testsuite/gas/aarch64/pr20364.d: New test driver.
Many of the existing sparc tests fail in non-ELF targets (coff and
a.out) due to spurious differences in the expected results:
- Unlike ELF, a.out text sections are aligned to 2**3 and padded
accordingly. The padding instruction is a `nop' (01 00 00 00).
- Likewise, coff text sections are also aligned to 2**3 and padded
accordingly. However, the padding instruction in these targets is an
`illtrap 0' (00 00 00 00).
- Unlike ELF, a.out and coff binaries don't contain hardware
capabilities bits that could be used by BFD to determine the opcodes
architecture corresponding to the instructions encoded in the
objects (v9, v9a, v9b, v9c, etc). Consequently, in both a.out and
coff tests we would need to pass proper `-m sparc:vXXX' options when
invoking objdump before comparing results.
In order to fix these issues, the most obvious solution would be to have
three variants of .d files per impacted test. For example, for save.d
we would have: save-elf.d, save-aout.d and save-coff.d. Using the
`#source' directive, a single save.s file would provide the input for
all of them. However, this approach has the following problems:
- The #target and #notarget .d directives are very limited: they use
globs instead of regular expressions, and thus it is not possible (or
too messy) to use them to discriminate between elf, coff and a.out
sparc targets.
- It adds little or no value to have variants of all these tests for all
the target types, and it would be a burden to maintain them. Actually
the features tested in the spuriously failing tests (relatively modern
sparc instructions, registers and asis) are not really found in
running coff or a.out sparc systems.
This patch changes sparc.exp so it will run these tests only in
ELF-targets, using the more standard `is_elf_format' from
binutils-common.exp instead of the ad-hoc (and less convenient, as it
must be called before _every_ single elf-only test) sparc_elf_setup.
Incidentally, the patch also fixes the #name entry for save-args.d.
Tested in sparc*-*-linux-gnu, sparc-aout and sparc-coff targets.
gas/ChangeLog:
2016-07-27 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/sparc/sparc.exp: Use is_elf_format to discriminate
ELF targets.
Run natural, natural-32, pr4587, ticc-imm-reg, v8-movwr-imm,
pause, save-args, cbcond, cfr, crypto edge, flush, hpcvis3, ima,
ld_st_fsr, ldtw_sttw, ldd_std, ldx_stx, ldx_efsr, mwait, mcdper,
sparc5vis4, xcrypto, v9branch1 and imm-plus-rreg only in ELF
targets.
(sparc_elf_setup): Delete.
* testsuite/gas/sparc/save-args.d: Fix a copy-paste typo in the
test's #name entry.
Convert microMIPS branches and jumps whose delay slot would be filled by
a generated NOP instruction to the corresponding compact form where one
exists, in a manner similar to MIPS16 JR->JRC and JALR->JALRC swap.
Do so even where the transformation switches from a 16-bit to a 32-bit
branch encoding for no benefit in code size reduction, as this is still
advantageous. This is because a branch/NOP pair takes 2 pipeline slots
or a 2-cycle completion latency except in superscalar implementations.
Whereas a compact branch may or may not stall on its target fetch, so it
will at most have a 2-cycle completion latency and may have only 1 even
in scalar implementations, and in superscalar implementations it is
expected to have no worse latency as a branch/NOP pair has. Also it
won't stall and therefore take the extra latency cycle in the not-taken
case.
Technically this is the same as MIPS16 compaction: for the qualifying
instruction encodings the APPEND_ADD_COMPACT machine code generation
method is selected where APPEND_ADD_WITH_NOP otherwise would and tells
the code generator in `append_insn' to convert the regular form of an
instruction to its corresponding compact form. For this the opcode is
tweaked as necessary and the microMIPS opcode table is scanned for the
matching updated instruction. A non-$0 `rt' operand to BEQ and BNE
instructions is moved to the `rs' operand field of BEQZC and BNEZC
encodings as required.
Unlike with MIPS16 compaction however we need to handle out-of-distance
branch relaxation as well. We do this by deferring the generation of
any delay-slot NOP required to relaxation made in `md_convert_frag', by
converting the APPEND_ADD_WITH_NOP machine code generation to APPEND_ADD
where a relaxed instruction is recorded. Relaxation then, depending on
actual code produced, chooses between either using a compact branch or
jump encoding and emitting the NOP outstanding if no compact encoding is
possible.
For code simplicity's sake the relaxation pass is retained even if the
principle of preferring a compact encoding to a 16-bit branch/NOP pair
means, in the absence of out-of-range branch relaxation, that a single
compact branch machine code instruction will eventually be produced from
a given assembly source instruction.
gas/
* config/tc-mips.c (RELAX_MICROMIPS_ENCODE): Add `nods' flag.
(RELAX_MICROMIPS_RELAX32, RELAX_MICROMIPS_TOOFAR16)
(RELAX_MICROMIPS_MARK_TOOFAR16, RELAX_MICROMIPS_CLEAR_TOOFAR16)
(RELAX_MICROMIPS_TOOFAR32, RELAX_MICROMIPS_MARK_TOOFAR32)
(RELAX_MICROMIPS_CLEAR_TOOFAR32): Shift bits.
(get_append_method): Also return APPEND_ADD_COMPACT for
microMIPS instructions.
(find_altered_mips16_opcode): Exclude macros from matching.
Factor code out...
(find_altered_opcode): ... to this new function.
(find_altered_micromips_opcode): New function.
(frag_branch_delay_slot_size): Likewise.
(append_insn): Handle microMIPS branch/jump compaction.
(macro_start): Likewise.
(relaxed_micromips_32bit_branch_length): Likewise.
(md_convert_frag): Likewise.
* testsuite/gas/mips/micromips.s: Add conditional explicit NOPs
for delay slot filling.
* testsuite/gas/mips/micromips-b16.s: Add explicit NOPs for
delay slot filling.
* testsuite/gas/mips/micromips-size-1.s: Likewise.
* testsuite/gas/mips/micromips.l: Adjust line numbers.
* testsuite/gas/mips/micromips-warn.l: Likewise.
* testsuite/gas/mips/micromips-size-1.l: Likewise.
* testsuite/gas/mips/micromips.d: Adjust padding.
* testsuite/gas/mips/micromips-trap.d: Likewise.
* testsuite/gas/mips/micromips-insn32.d: Likewise.
* testsuite/gas/mips/micromips-noinsn32.d: Likewise.
* testsuite/gas/mips/micromips@beq.d: Update patterns for
branch/jump compaction.
* testsuite/gas/mips/micromips@bge.d: Likewise.
* testsuite/gas/mips/micromips@bgeu.d: Likewise.
* testsuite/gas/mips/micromips@blt.d: Likewise.
* testsuite/gas/mips/micromips@bltu.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-4.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-4-64.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5pic.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5-64.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5pic-64.d: Likewise.
* testsuite/gas/mips/micromips@jal-svr4pic-local.d: Likewise.
* testsuite/gas/mips/micromips@jal-svr4pic-local-n32.d:
Likewise.
* testsuite/gas/mips/micromips@jal-svr4pic-local-n64.d:
Likewise.
* testsuite/gas/mips/micromips@loc-swap.d: Likewise.
* testsuite/gas/mips/micromips@loc-swap-dis.d: Likewise.
* testsuite/gas/mips/micromips@relax.d: Likewise.
* testsuite/gas/mips/micromips@relax-at.d: Likewise.
* testsuite/gas/mips/micromips@relax-swap3.d: Likewise.
* testsuite/gas/mips/branch-extern-2.d: Likewise.
* testsuite/gas/mips/branch-extern-4.d: Likewise.
* testsuite/gas/mips/branch-section-2.d: Likewise.
* testsuite/gas/mips/branch-section-4.d: Likewise.
* testsuite/gas/mips/branch-weak-2.d: Likewise.
* testsuite/gas/mips/branch-weak-5.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-n32.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-n64.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend.d:
Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend-n32.d:
Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend-n64.d:
Likewise.
* testsuite/gas/mips/micromips-compact.d: New test.
* testsuite/gas/mips/mips.exp: Run the new test.
ld/
* testsuite/ld-mips-elf/micromips-branch-absolute.d: Update
patterns for branch compaction.
* testsuite/ld-mips-elf/micromips-branch-absolute-addend.d:
Likewise.
opcodes/
* micromips-opc.c (micromips_opcodes): Reorder "bc" next to "b",
"beqzc" next to "beq", "bnezc" next to "bne" and "jrc" next to
"j".
opcodes * arc-nps400-tbl.h: Change block comments to GNU format.
* arc-dis.c: Add new globals addrtypenames,
addrtypenames_max, and addtypeunknown.
(get_addrtype): New function.
(print_insn_arc): Print colons and address types when
required.
* arc-opc.c: Add MAKE_INSERT_NPS_ADDRTYPE macro and use to
define insert and extract functions for all address types.
(arc_operands): Add operands for colon and all address
types.
* arc-nps-400-tbl.h: Add NPS-400 BMU instructions to opcode table.
* arc-opc.c: Add NPS_BD_TYPE and NPS_BMU_NUM operands,
insert_nps_bd_num_buff and extract_nps_bd_num_buff functions.
* arc-nps-400-tbl.h: Add NPS-400 PMU instructions to opcode table.
* arc-opc.c: Add NPS_PMU_NXT_DST and NPS_PMU_NUM_JOB operands,
insert_nps_pmu_num_job and extract_nps_pmu_num_job functions.
include * opcode/arc.h: Add ARC_OPERAND_ADDRTYPE,
ARC_OPERAND_COLON. Add the arc_nps_address_type enum and
ARC_NUM_ADDRTYPES.
* opcode/arc.h: Add BMU to insn_class_t enum.
* opcode/arc.h: Add PMU to insn_class_t enum.
gas * config/tc-arc.c: Add new global arc_addrtype_hash.
Define O_colon and O_addrtype.
(debug_exp): Add O_colon and O_addrtype.
(tokenize_arguments): Handle colon and address type
tokens.
(declare_addrtype): New function.
(md_begin): Initialise arc_addrtype_hash.
(arc_parse_name): Add lookup of address types.
(assemble_insn): Handle colons and address types by
ignoring them.
* testsuite/gas/arc/nps400-8.s: New file.
* testsuite/gas/arc/nps400-8.d: New file.
* testsuite/gas/arc/nps400-8.s: Add PMU instruction tests.
* testsuite/gas/arc/nps400-8.d: Add expected PMU
instruction output.
Remove R_MIPS_PC26_S2 and R_MIPS_PC21_S2 relocation references that went
into `mips_force_relocation' with commit 9d862524f6 ("MIPS: Verify the
ISA mode and alignment of branch and jump targets") by mistake. Their
BFD_RELOC_MIPS_26_PCREL_S2 and BFD_RELOC_MIPS_21_PCREL_S2 equivalents
are already handled there.
gas/
* config/tc-mips.c (mips_force_relocation): Remove
R_MIPS_PC26_S2 and R_MIPS_PC21_S2.
Convert cross-mode regular MIPS and microMIPS BAL instructions to JALX,
similarly to how JAL instructions are converted.
bfd/
* elfxx-mips.c (mips_elf_perform_relocation): Convert cross-mode
BAL to JALX.
(_bfd_mips_elf_relocate_section) <bfd_reloc_outofrange>: Add a
corresponding error message.
gas/
* config/tc-mips.c (mips_force_relocation, mips_fix_adjustable):
Adjust comments for BAL to JALX linker conversion.
(fix_bad_cross_mode_branch_p): Accept cross-mode BAL.
* testsuite/gas/mips/unaligned-branch-1.l: Update error messages
expected.
* testsuite/gas/mips/unaligned-branch-micromips-1.l: Likewise.
* testsuite/gas/mips/branch-local-4.d: New test.
* testsuite/gas/mips/branch-local-n32-4.d: New test.
* testsuite/gas/mips/branch-local-n64-4.d: New test.
* testsuite/gas/mips/branch-addend.d: New test.
* testsuite/gas/mips/branch-addend-n32.d: New test.
* testsuite/gas/mips/branch-addend-n64.d: New test.
* testsuite/gas/mips/branch-local-4.s: New test source.
* testsuite/gas/mips/branch-addend.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/unaligned-branch-2.d: Update error
messages expected.
* testsuite/ld-mips-elf/unaligned-branch-r6-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-branch-mips16.d: Likewise.
* testsuite/ld-mips-elf/unaligned-branch-micromips.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-addend.d: New test.
* testsuite/ld-mips-elf/bal-jalx-local.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic.d: New test.
* testsuite/ld-mips-elf/bal-jalx-addend-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-local-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-addend-n64.d: New test.
* testsuite/ld-mips-elf/bal-jalx-local-n64.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-n64.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-2.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-3.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-addend-2.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-addend-3.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-2.s: New test source.
* testsuite/ld-mips-elf/unaligned-jalx-3.s: New test source.
* testsuite/ld-mips-elf/unaligned-jalx-addend-2.s: New test
source.
* testsuite/ld-mips-elf/unaligned-jalx-addend-3.s: New test
source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Verify that the ISA mode of branch targets is the same as the referring
relocation, so that an attempt to produce a branch between instructions
encoded in different ISA modes each causes an error rather than silently
producing non-functional code. Make sure that no symbol or addend bits
are silently truncated: terminate with an error if the relocation value
calculated cannot be encoded in the relocatable field of a branch; for
REL targets also applying to any intermediate addend.
Also make jump target's alignment verification consistent with that for
branches.
This change will require an update to some obscure handcoded assembly
sources which make branches to labels placed at data objects, however
for microMIPS code only. These labels will have to be updated with the
`.insn' directive for containing code to assemble and link successfully.
Such code is broken as any such labels have always been required by the
microMIPS architecture specification[1][2] to be annotated this way for
correct interpretation, and with our old code missing `.insn' directives
caused labels to present different semantics depending on whether they
were referred with branch (ISA bit ignored) or other relocations (ISA
bit respected).
Enforcing these checks however will ensure errors in building software,
like mixed regular MIPS and microMIPS code links with branches between,
will be diagnosed at the build time rather than causing odd run-time
errors such as intermittent crashes. It will also let cross-mode BAL
instructions be converted to JALX instructions, with a separate change.
References:
[1] "MIPS Architecture for Programmers, Volume II-B: The microMIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00582,
Revision 5.04, January 15, 2014, Section 7.1 "Assembly-Level
Compatibility", p. 533
[2] "MIPS Architecture for Programmers, Volume II-B: The microMIPS64
Instruction Set", MIPS Technologies, Inc., Document Number: MD00594,
Revision 5.04, January 15, 2014, Section 8.1 "Assembly-Level
Compatibility", p. 623
bfd/
* elfxx-mips.c (b_reloc_p): Add R_MICROMIPS_PC16_S1,
R_MICROMIPS_PC10_S1 and R_MICROMIPS_PC7_S1.
(branch_reloc_p): New function.
(mips_elf_calculate_relocation): Handle ISA mode determination
for relocations against section symbols, against absolute
symbols and absolute relocations. Also set `*cross_mode_jump_p'
for branches.
<R_MIPS16_26, R_MIPS_26, R_MICROMIPS_26_S1>: Suppress alignment
checks for weak undefined symbols. Also check target alignment
within the same ISA mode.
<R_MIPS_PC16, R_MIPS_GNU_REL16_S2>: Handle cross-mode branches
in the alignment check.
<R_MICROMIPS_PC7_S1>: Add an alignment check.
<R_MICROMIPS_PC10_S1>: Likewise.
<R_MICROMIPS_PC16_S1>: Likewise.
(mips_elf_perform_relocation): Report a failure for unsupported
same-mode JALX instructions and cross-mode branches.
(_bfd_mips_elf_relocate_section) <bfd_reloc_outofrange>: Add
error messages for jumps to misaligned addresses.
gas/
* config/tc-mips.c (mips_force_relocation): Also retain branch
relocations against MIPS16 and microMIPS symbols.
(fix_bad_cross_mode_jump_p): New function.
(fix_bad_same_mode_jalx_p): Likewise.
(fix_bad_misaligned_jump_p): Likewise.
(fix_bad_cross_mode_branch_p): Likewise.
(fix_bad_misaligned_branch_p): Likewise.
(fix_validate_branch): Likewise.
(md_apply_fix) <BFD_RELOC_MIPS_JMP, BFD_RELOC_MIPS16_JMP>
<BFD_RELOC_MICROMIPS_JMP>: Separate from BFD_RELOC_MIPS_SHIFT5,
etc. Verify the ISA mode and alignment of the jump target.
<BFD_RELOC_MIPS_21_PCREL_S2>: Replace the inline alignment check
with a call to `fix_validate_branch'.
<BFD_RELOC_MIPS_26_PCREL_S2>: Likewise.
<BFD_RELOC_16_PCREL_S2>: Likewise.
<BFD_RELOC_MICROMIPS_7_PCREL_S1, BFD_RELOC_MICROMIPS_10_PCREL_S1>
<BFD_RELOC_MICROMIPS_16_PCREL_S1>: Retain the original addend.
Verify the ISA mode and alignment of the branch target.
(md_convert_frag): Verify the ISA mode and alignment of resolved
MIPS16 branch targets.
* testsuite/gas/mips/branch-misc-1.s: Annotate non-instruction
branch targets with `.insn'.
* testsuite/gas/mips/branch-misc-5.s: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5-64.d: Update
accordingly.
* testsuite/gas/mips/micromips@branch-misc-5pic-64.d: Likewise.
* testsuite/gas/mips/micromips-branch-relax.s: Annotate
non-instruction branch target with `.insn'.
* testsuite/gas/mips/micromips.s: Replace microMIPS JALX targets
with external symbols.
* testsuite/gas/mips/micromips-insn32.d: Update accordingly.
* testsuite/gas/mips/micromips-noinsn32.d: Likewise.
* testsuite/gas/mips/micromips-trap.d: Likewise.
* testsuite/gas/mips/micromips.d: Likewise.
* testsuite/gas/mips/mips16.s: Annotate non-instruction branch
targets with `.insn'.
* testsuite/gas/mips/mips16.d: Update accordingly.
* testsuite/gas/mips/mips16-64.d: Likewise.
* testsuite/gas/mips/mips16-dwarf2.s: Annotate non-instruction
branch target with `.insn'.
* testsuite/gas/mips/relax-swap3.s: Likewise.
* testsuite/gas/mips/branch-local-2.l: New list test.
* testsuite/gas/mips/branch-local-3.l: New list test.
* testsuite/gas/mips/branch-local-n32-2.l: New list test.
* testsuite/gas/mips/branch-local-n32-3.l: New list test.
* testsuite/gas/mips/branch-local-n64-2.l: New list test.
* testsuite/gas/mips/branch-local-n64-3.l: New list test.
* testsuite/gas/mips/unaligned-jump-1.l: New list test.
* testsuite/gas/mips/unaligned-jump-2.l: New list test.
* testsuite/gas/mips/unaligned-jump-3.d: New test.
* testsuite/gas/mips/unaligned-jump-mips16-1.l: New list test.
* testsuite/gas/mips/unaligned-jump-mips16-2.l: New list test.
* testsuite/gas/mips/unaligned-jump-mips16-3.d: New test.
* testsuite/gas/mips/unaligned-jump-micromips-1.l: New list
test.
* testsuite/gas/mips/unaligned-jump-micromips-2.l: New list
test.
* testsuite/gas/mips/unaligned-jump-micromips-3.d: New test.
* testsuite/gas/mips/unaligned-branch-1.l: New list test.
* testsuite/gas/mips/unaligned-branch-2.l: New list test.
* testsuite/gas/mips/unaligned-branch-3.d: New test.
* testsuite/gas/mips/unaligned-branch-r6-1.l: New list test.
* testsuite/gas/mips/unaligned-branch-r6-2.l: New list test.
* testsuite/gas/mips/unaligned-branch-r6-3.l: New list test.
* testsuite/gas/mips/unaligned-branch-r6-4.l: New list test.
* testsuite/gas/mips/unaligned-branch-r6-5.d: New test.
* testsuite/gas/mips/unaligned-branch-r6-6.d: New test.
* testsuite/gas/mips/unaligned-branch-mips16-1.l: New list test.
* testsuite/gas/mips/unaligned-branch-mips16-2.l: New list test.
* testsuite/gas/mips/unaligned-branch-mips16-3.d: New test.
* testsuite/gas/mips/unaligned-branch-micromips-1.l: New list
test.
* testsuite/gas/mips/unaligned-branch-micromips-2.l: New list
test.
* testsuite/gas/mips/unaligned-branch-micromips-3.d: New test.
* testsuite/gas/mips/branch-local-2.s: New test source.
* testsuite/gas/mips/branch-local-3.s: New test source.
* testsuite/gas/mips/branch-local-n32-2.s: New test source.
* testsuite/gas/mips/branch-local-n32-3.s: New test source.
* testsuite/gas/mips/branch-local-n64-2.s: New test source.
* testsuite/gas/mips/branch-local-n64-3.s: New test source.
* testsuite/gas/mips/unaligned-jump-1.s: New test source.
* testsuite/gas/mips/unaligned-jump-2.s: New test source.
* testsuite/gas/mips/unaligned-jump-mips16-1.s: New test source.
* testsuite/gas/mips/unaligned-jump-mips16-2.s: New test source.
* testsuite/gas/mips/unaligned-jump-micromips-1.s: New test
source.
* testsuite/gas/mips/unaligned-jump-micromips-2.s: New test
source.
* testsuite/gas/mips/unaligned-branch-1.s: New test source.
* testsuite/gas/mips/unaligned-branch-2.s: New test source.
* testsuite/gas/mips/unaligned-branch-r6-1.s: New test source.
* testsuite/gas/mips/unaligned-branch-r6-2.s: New test source.
* testsuite/gas/mips/unaligned-branch-r6-3.s: New test source.
* testsuite/gas/mips/unaligned-branch-r6-4.s: New test source.
* testsuite/gas/mips/unaligned-branch-mips16-1.s: New test
source.
* testsuite/gas/mips/unaligned-branch-mips16-2.s: New test
source.
* testsuite/gas/mips/unaligned-branch-micromips-1.s: New test
source.
* testsuite/gas/mips/unaligned-branch-micromips-2.s: New test
source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/unaligned-jalx-1.d: Update error message
expected.
* testsuite/ld-mips-elf/unaligned-jalx-addend-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-addend-mips16-1.d:
Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-addend-micromips-1.d:
Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-mips16-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-micromips-1.d: Likewise.
* testsuite/ld-mips-elf/undefweak-overflow.s: Add jumps,
microMIPS BAL and MIPS16 instructions.
* testsuite/ld-mips-elf/undefweak-overflow.d: Update
accordingly.
* testsuite/ld-mips-elf/unaligned-branch-2.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-r6-1.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-r6-2.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-mips16.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-micromips.d: New test.
* testsuite/ld-mips-elf/unaligned-jump-mips16.d: New test.
* testsuite/ld-mips-elf/unaligned-jump-micromips.d: New test.
* testsuite/ld-mips-elf/unaligned-jump.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
It can be initialized with values greater than 0x80000000, which don't fit in a
signed int. Further it appears to be used as a set of bit flags where unsigned
int is more typical.
gas/ChangeLog:
2016-07-19 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-nds32.c (struct nds32_pseudo_opcode): Make pseudo_val
unsigned int.
(do_pseudo_b): Adjust.
(do_pseudo_bal): Likewise.
(do_pseudo_bge): Likewise.
(do_pseudo_bges): Likewise.
(do_pseudo_bgt): Likewise.
(do_pseudo_bgts): Likewise.
(do_pseudo_ble): Likewise.
(do_pseudo_bles): Likewise.
(do_pseudo_blt): Likewise.
(do_pseudo_blts): Likewise.
(do_pseudo_br): Likewise.
(do_pseudo_bral): Likewise.
(do_pseudo_la): Likewise.
(do_pseudo_li): Likewise.
(do_pseudo_ls_bhw): Likewise.
(do_pseudo_ls_bhwp): Likewise.
(do_pseudo_ls_bhwpc): Likewise.
(do_pseudo_ls_bhwi): Likewise.
(do_pseudo_move): Likewise.
(do_pseudo_neg): Likewise.
(do_pseudo_not): Likewise.
(do_pseudo_pushpopm): Likewise.
(do_pseudo_pushpop): Likewise.
(do_pseudo_v3push): Likewise.
(do_pseudo_v3pop): Likewise.
(do_pseudo_pushpop_stack): Likewise.
(do_pseudo_push_bhwd): Likewise.
(do_pseudo_pop_bhwd): Likewise.
(do_pseudo_pusha): Likewise.
(do_pseudo_pushi): Likewise.
gas/ChangeLog:
2016-07-19 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-sparc.c (struct pop_entry): Make the type of reloc
bfd_reloc_code_real_type.
gas/ChangeLog:
2016-07-19 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-z8k.c (newfix): Make type of type argument
bfd_reloc_code_real_type.
(apply_fix): Likewise.
Don't convert PC-relative REL relocations against absolute symbols to
section-relative references and retain the original symbol reference
instead. Offsets into the absolute section may overflow the limited
range of their in-place addend field, causing an assembly error, e.g.:
$ cat test.s
.text
.globl foo
.ent foo
foo:
b bar
.end foo
.set bar, 0x12345678
$ as -EB -32 -o test.o test.s
test.s: Assembler messages:
test.s:3: Error: relocation overflow
$
With the original reference retained the source can now be assembled and
linked successfully:
$ as -EB -32 -o test.o test.s
$ objdump -dr test.o
test.o: file format elf32-tradbigmips
Disassembly of section .text:
00000000 <foo>:
0: 1000ffff b 0 <foo>
0: R_MIPS_PC16 bar
4: 00000000 nop
...
$ ld -melf32btsmip -Ttext 0x12340000 -e foo -o test test.o
$ objdump -dr test
test: file format elf32-tradbigmips
Disassembly of section .text:
12340000 <foo>:
12340000: 1000159d b 12345678 <bar>
12340004: 00000000 nop
...
$
For simplicity always retain the original symbol reference, even if it
would indeed fit.
Making TC_FORCE_RELOCATION_ABS separate from TC_FORCE_RELOCATION causes
R_MICROMIPS_PC7_S1, R_MICROMIPS_PC10_S1 and R_MICROMIPS_PC16_S1 branch
relocations against absolute symbols to be converted on RELA targets to
section-relative references. This is an intended effect of this change.
Absolute symbols carry no ISA annotation in their `st_other' field and
their value is not going to change with linker relaxation, so it is safe
to discard the original reference and keep the calculated final symbol
value only in the relocation's addend.
Similarly R6 R_MIPS_PCHI16 and R_MIPS_PCLO16 relocations referring
absolute symbols can be safely converted even on REL targets, as there
the in-place addend of these relocations covers the entire 32-bit
address space so it can hold the calculated final symbol value, and
likewise the value referred won't be affected by any linker relaxation.
Add a set of suitable test cases and enable REL linker tests which now
work and were previously used as dump patterns for RELA tests only.
gas/
* config/tc-mips.h (TC_FORCE_RELOCATION_ABS): New macro.
(mips_force_relocation_abs): New prototype.
* config/tc-mips.c (mips_force_relocation_abs): New function.
* testsuite/gas/mips/branch-absolute.d: Adjust dump patterns.
* testsuite/gas/mips/mips16-branch-absolute.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-n32.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-n64.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend-n32.d:
Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend-n64.d:
Likewise.
* testsuite/gas/mips/branch-absolute-addend.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-addend.d: New test.
* testsuite/gas/mips/micromips-branch-absolute-addend.d: New
test.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/mips-elf.exp: Run
`branch-absolute-addend', `mips16-branch-absolute',
`mips16-branch-absolute-addend' and
`micromips-branch-absolute-addend'.
Correct a problem with the ISA bit being stripped from the addend of
compressed branch relocations, affecting RELA targets. It has been
there since microMIPS support has been added, with:
commit df58fc944d
Author: Richard Sandiford <rdsandiford@googlemail.com>
Date: Sun Jul 24 14:20:15 2011 +0000
<https://sourceware.org/ml/binutils/2011-07/msg00198.html>, ("MIPS:
microMIPS ASE support") and R_MICROMIPS_PC7_S1, R_MICROMIPS_PC10_S1 and
R_MICROMIPS_PC16_S1 relocations originally affected, and the
R_MIPS16_PC16_S1 relocation recently added with commit c9775dde32
("MIPS16: Add R_MIPS16_PC16_S1 branch relocation support") actually
triggering a linker error, due to its heightened processing strictness
level:
$ cat test.s
.text
.set mips16
foo:
b bar
.set bar, 0x1235
.align 4, 0
$ as -EB -n32 -o test.o test.s
$ objdump -dr test.o
test.o: file format elf32-ntradbigmips
Disassembly of section .text:
00000000 <foo>:
0: f000 1000 b 4 <foo+0x4>
0: R_MIPS16_PC16_S1 *ABS*+0x1230
...
$ ld -melf32btsmipn32 -Ttext 0 -e 0 -o test test.o
test.o: In function `foo':
(.text+0x0): Branch to a non-instruction-aligned address
$
This is because the ISA bit of the branch target does not match the ISA
bit of the referring branch, hardwired to 1 of course.
Retain the ISA bit then, so that the linker knows this is really MIPS16
code referred:
$ objdump -dr fixed.o
fixed.o: file format elf32-ntradbigmips
Disassembly of section .text:
00000000 <foo>:
0: f000 1000 b 4 <foo+0x4>
0: R_MIPS16_PC16_S1 *ABS*+0x1231
...
$ ld -melf32btsmipn32 -Ttext 0 -e 0 -o fixed fixed.o
$
Add a set of MIPS16 tests to cover the relevant cases, excluding linker
tests though which would overflow the in-place addend on REL targets and
use them as dump patterns for RELA targets only.
gas/
* config/tc-mips.c (md_apply_fix) <BFD_RELOC_MIPS16_16_PCREL_S1>
<BFD_RELOC_MICROMIPS_7_PCREL_S1, BFD_RELOC_MICROMIPS_10_PCREL_S1>
<BFD_RELOC_MICROMIPS_16_PCREL_S1>: Keep the ISA bit in the
addend calculated.
* testsuite/gas/mips/mips16-branch-absolute.s: Set the ISA bit
in `bar', export `foo'.
* testsuite/gas/mips/mips16-branch-absolute.d: Adjust
accordingly.
* testsuite/gas/mips/mips16-branch-absolute-n32.d: Likewise.
* testsuite/gas/mips/mips16-branch-absolute-n64.d: Likewise.
* testsuite/gas/mips/mips16-branch-absolute-addend-n32.d:
Likewise.
* testsuite/gas/mips/mips16-branch-absolute-addend-n64.d:
Likewise.
ld/
* testsuite/ld-mips-elf/mips16-branch-absolute.d: New test.
* testsuite/ld-mips-elf/mips16-branch-absolute-n32.d: New test.
* testsuite/ld-mips-elf/mips16-branch-absolute-n64.d: New test.
* testsuite/ld-mips-elf/mips16-branch-absolute-addend.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-addend-n32.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-addend-n64.d: New
test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests, except
from `mips16-branch-absolute' and
`mips16-branch-absolute-addend', referred indirectly only.
Fix a generic BFD issue with relocations against absolute symbols, which
are installed without using any individual relocation handler provided
by the backend. This causes any absolute section's addend to be lost on
REL targets such as o32 MIPS, and also relocation-specific calculation
adjustments are not made.
As an example assembling this program:
$ cat test.s
.text
foo:
b bar
b baz
.set bar, 0x1234
$ as -EB -32 -o test-o32.o test.s
$ as -EB -n32 -o test-n32.o test.s
produces this binary code:
$ objdump -dr test-o32.o test-n32.o
test-o32.o: file format elf32-tradbigmips
Disassembly of section .text:
00000000 <foo>:
0: 10000000 b 4 <foo+0x4>
0: R_MIPS_PC16 *ABS*
4: 00000000 nop
8: 1000ffff b 8 <foo+0x8>
8: R_MIPS_PC16 baz
c: 00000000 nop
test-n32.o: file format elf32-ntradbigmips
Disassembly of section .text:
00000000 <foo>:
0: 10000000 b 4 <foo+0x4>
0: R_MIPS_PC16 *ABS*+0x1230
4: 00000000 nop
8: 10000000 b c <foo+0xc>
8: R_MIPS_PC16 baz-0x4
c: 00000000 nop
$
where it is clearly visible in `test-o32.o', which uses REL relocations,
that the absolute section's addend equivalent to the value of `bar' -- a
reference to which cannot be fully resolved at the assembly time,
because the reference is PC-relative -- has been lost, as has been the
relocation-specific adjustment of -4, required to take into account the
PC+4-relative calculation made by hardware with branches and seen in the
external symbol reference to `baz' as the `ffff' addend encoded in the
instruction word. In `test-n32.o', which uses RELA relocations, the
absolute section's addend has been correctly retained.
Give precedence then in `bfd_perform_relocation' and
`bfd_install_relocation' to any individual relocation handler the
backend selected may have provided, while still resorting to the generic
calculation otherwise. This retains the semantics which we've had since
forever or before the beginning of our repository history, and is at the
very least compatible with `bfd_elf_generic_reloc' being used as the
handler.
Retain the `bfd_is_und_section' check unchanged at the beginning of
`bfd_perform_relocation' since this does not affect the semantics of the
function. The check returns the same `bfd_reloc_undefined' code the
check for a null `howto' does, so swapping the two does not matter.
Also the check is is mutually exclusive with the `bfd_is_abs_section'
check, since a section cannot be absolute and undefined both at once, so
swapping the two does not matter either.
With this change applied the program quoted above now has the in-place
addend correctly calculated and installed in the field being relocated:
$ objdump -dr fixed-o32.o
fixed-o32.o: file format elf32-tradbigmips
Disassembly of section .text:
00000000 <foo>:
0: 1000048c b 1234 <bar>
0: R_MIPS_PC16 *ABS*
4: 00000000 nop
8: 1000ffff b 8 <foo+0x8>
8: R_MIPS_PC16 baz
c: 00000000 nop
$
Add a set of MIPS tests to cover the relevant cases, including absolute
symbols with addends, and verifying that PC-relative relocations against
symbols concerned resolve to the same value in the final link regardless
of whether the REL or the RELA relocation form is used. Exclude linker
tests though which would overflow the in-place addend on REL targets and
use them as dump patterns for RELA targets only.
bfd/
* reloc.c (bfd_perform_relocation): Try the `howto' handler
first with relocations against absolute symbols.
(bfd_install_relocation): Likewise.
gas/
* testsuite/gas/mips/mips16-branch-absolute.d: Update patterns.
* testsuite/gas/mips/branch-absolute.d: New test.
* testsuite/gas/mips/branch-absolute-n32.d: New test.
* testsuite/gas/mips/branch-absolute-n64.d: New test.
* testsuite/gas/mips/branch-absolute-addend-n32.d: New test.
* testsuite/gas/mips/branch-absolute-addend-n64.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-n32.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-n64.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-addend-n32.d: New
test.
* testsuite/gas/mips/mips16-branch-absolute-addend-n64.d: New
test.
* testsuite/gas/mips/micromips-branch-absolute.d: New test.
* testsuite/gas/mips/micromips-branch-absolute-n32.d: New test.
* testsuite/gas/mips/micromips-branch-absolute-n64.d: New test.
* testsuite/gas/mips/micromips-branch-absolute-addend-n32.d: New
test.
* testsuite/gas/mips/micromips-branch-absolute-addend-n64.d: New
test.
* testsuite/gas/mips/branch-absolute.s: New test source.
* testsuite/gas/mips/branch-absolute-addend.s: New test source.
* testsuite/gas/mips/mips16-branch-absolute-addend.s: New test
source.
* testsuite/gas/mips/micromips-branch-absolute.s: New test
source.
* testsuite/gas/mips/micromips-branch-absolute-addend.s: New
test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/branch-absolute.d: New test.
* testsuite/ld-mips-elf/branch-absolute-n32.d: New test.
* testsuite/ld-mips-elf/branch-absolute-n64.d: New test.
* testsuite/ld-mips-elf/branch-absolute-addend.d: New test.
* testsuite/ld-mips-elf/branch-absolute-addend-n32.d: New test.
* testsuite/ld-mips-elf/branch-absolute-addend-n64.d: New test.
* testsuite/ld-mips-elf/micromips-branch-absolute.d: New test.
* testsuite/ld-mips-elf/micromips-branch-absolute-n32.d: New
test.
* testsuite/ld-mips-elf/micromips-branch-absolute-n64.d: New
test.
* testsuite/ld-mips-elf/micromips-branch-absolute-addend.d: New
test.
* testsuite/ld-mips-elf/micromips-branch-absolute-addend-n32.d:
New test.
* testsuite/ld-mips-elf/micromips-branch-absolute-addend-n64.d:
New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests, except
from `branch-absolute-addend' and
`micromips-branch-absolute-addend', referred indirectly only.
Address issues with the disassembly of the NAL assembly idiom and R6
instruction introduced with commit 7361da2c95 ("Add support for MIPS
R6.") and then further tweaked with commit b9121b573e ("Add in a JALRC
alias and fix the NAL instruction."). As from R6 this instruction has
replaced the encoding of `bltzal $0, . + 4' as the solely supported form
of the former BLTZAL instruction for the regular MIPS ISA.
The instruction is marked as an alias only in our regular MIPS opcode
table, making it fail to disassemble in R6 code if the `no-aliases'
machine option has been passed to `objdump':
$ cat test.s
.text
foo:
nal
$ as -mips64r6 -o test.o test.s
$ objdump -dr --prefix-addresses --show-raw-insn -M no-aliases test.o
nal.o: file format elf32-tradbigmips
Disassembly of section .text:
00000000 <foo> 04100000 0x4100000
...
$
This is because the `bltzal' entry has been marked as pre-R6 only in the
opcode table and there is no other opcode pattern to match.
Additionally the changes referred made NAL replace the equivalent
`bltzal $0, . + 4' instruction in disassembly, unless the `no-aliases'
machine option has been used, in legacy code. Seeing NAL, especially in
its updated form lacking the branch target argument, in the disassembly
of such code may be confusing to people. This is because unlike with
EHB only used in R2 and newer code -- the machine encoding of which we
anyway always disassemble to its corresponding current architecture's
mnemonic rather than its legacy meaning of `sll $0, $0, 3' -- BLTZAL has
been indeed used in legacy code. Even though `bltzal $0, . + 8' and its
machine code encoding (0x04100001) -- which is not equivalent to NAL and
still disassembles as BLTZAL -- has been the predominant form as opposed
to NAL's `bltzal $0, . + 4' (0x04100000), it makes sense to always keep
the old form in disassembly, while still accepting `nal' in assembly.
Remove the alias marking then from the the `nal' instruction pattern,
making it always match for R6 code, even with the `no-aliases' option.
And move the entry beyond the `bltzal' entry, making the latter one take
precedence for legacy binary code, while letting the former still match
any `nal' mnemonic in source code assembled for a legacy target.
Add a suitable test case to the GAS test suite. While the change
affects the disassembler more than the assembler, so placing the test
case in the binutils test suite might be more appropriate, the intent is
also to verify that `nal' is still accepted by GAS for legacy targets,
plus we have test infrastructure available in the GAS test suite for
automatic multiple ISA level testing, which we lack from the binutils
framework.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Remove the INSN2_ALIAS
annotation from the "nal" entry and reorder it beyond "bltzal".
gas/
* testsuite/gas/mips/nal-1.d: New test.
* testsuite/gas/mips/mipsr6@nal-1.d: New test.
* testsuite/gas/mips/nal-2.d: New test.
* testsuite/gas/mips/mipsr6@nal-2.d: New test.
* testsuite/gas/mips/nal.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
This patch adds support for the LDTXA instructions, along with the
corresponding ASIs. Tests for GAS are included.
opcodes/ChangeLog:
2016-07-12 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (ldtxa): New macro.
(sparc_opcodes): Use the macro defined above to add entries for
the LDTXA instructions.
(asi_table): Add the ASI_TWINX_* asis used in the LDTXA
instruction.
gas/ChangeLog:
2016-07-12 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/sparc/ldtxa.s: New file.
* testsuite/gas/sparc/ldtxa.d: Likewise.
* testsuite/gas/sparc/sparc.exp: Execute the ldtxa test.
gas/ChangeLog:
2016-07-05 Claudiu Zissulescu <claziss@synopsys.com>
* config/tc-arc.c (arc_reloc_op_tag): Allow complex ops for dtpoff.
(tc_gen_reloc): Remove passing DTPOFF base info into reloc addendum as it is
no longer needed.
Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
A missing 'r' (or wrong 'e') register prefix needs to be complained
about if the template allows for a 64-bit register, not a 32-bit one.
I assume this was a copy-and-paste type of mistake
(from check_long_reg()).
Move `branch-misc-2' tests for non locally-defined-global symbols into
separate files. These tests have been introduced with:
commit 6f171daac9
Author: Alexandre Oliva <aoliva@redhat.com>
Date: Thu Dec 12 04:40:22 2002 +0000
<https://sourceware.org/ml/binutils/2002-11/msg00631.html>, ("mips:
branches to external labels are broken"), and:
commit d17b874b6c
Author: Alexandre Oliva <aoliva@redhat.com>
Date: Wed Mar 12 23:07:22 2003 +0000
<https://sourceware.org/ml/binutils/2003-03/msg00136.html>, ("On
resolving the MIPS gas branch reloc issue"), while the test case served
a different purpose. With the original intent of the test case brought
back with:
commit bad36eacda
Author: Daniel Jacobowitz <drow@false.org>
Date: Wed Nov 23 14:04:18 2005 +0000
<https://sourceware.org/ml/binutils/2005-11/msg00324.html>,
("R_MIPS_PC16, again"), these stand in the way for linker testing.
gas/
* testsuite/gas/mips/branch-misc-2.s: Move non
locally-defined-global symbol tests...
* testsuite/gas/mips/branch-misc-5.s: ... to this new test.
* testsuite/gas/mips/branch-misc-2.d: Update accordingly.
* testsuite/gas/mips/branch-misc-2-64.d: Likewise.
* testsuite/gas/mips/branch-misc-2pic.d: Likewise.
* testsuite/gas/mips/branch-misc-2pic-64.d: Likewise.
* testsuite/gas/mips/mipsr6@branch-misc-2-64.d: Likewise.
* testsuite/gas/mips/mipsr6@branch-misc-2pic-64.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-2.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-2-64.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-2pic.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-2pic-64.d: Likewise.
* testsuite/gas/mips/branch-misc-5.d: New test.
* testsuite/gas/mips/branch-misc-5pic.d: New test.
* testsuite/gas/mips/branch-misc-5-64.d: New test.
* testsuite/gas/mips/branch-misc-5pic-64.d: New test.
* testsuite/gas/mips/mipsr6@branch-misc-5-64.d: New test.
* testsuite/gas/mips/mipsr6@branch-misc-5pic-64.d: New test.
* testsuite/gas/mips/micromips@branch-misc-5.d: New test.
* testsuite/gas/mips/micromips@branch-misc-5pic.d: New test.
* testsuite/gas/mips/micromips@branch-misc-5-64.d: New test.
* testsuite/gas/mips/micromips@branch-misc-5pic-64.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
Feature flag handling was not perfect, +nofp16 disabled fp
instructions too.
New feature flag macros were added to check features with multiple
bits set (matters for FP_F16 and SIMD_F16 opcode feature tests).
The unused AARCH64_OPCODE_HAS_FEATURE was removed, all checks should
use one of the AARCH64_CPU_HAS_* macros. AARCH64_CPU_HAS_FEATURE
now checks all feature bits.
The aarch64_features table now contains the dependencies as
a separate field (so when the feature is enabled all dependencies
are enabled and when it is disabled everything that depends on it
is disabled).
Note that armv8-a+foo+nofoo is not equivalent to armv8-a if
+foo turns on dependent features that nofoo does not turn off.
gas/
* config/tc-aarch64.c (struct aarch64_option_cpu_value_table): Add
require field.
(aarch64_features): Initialize require fields.
(aarch64_parse_features): Handle dependencies.
(aarch64_feature_enable_set, aarch64_feature_disable_set): New.
(md_assemble): Use AARCH64_CPU_HAS_ALL_FEATURES.
* testsuite/gas/aarch64/illegal-nofp16.s: New.
* testsuite/gas/aarch64/illegal-nofp16.l: New.
* testsuite/gas/aarch64/illegal-nofp16.d: New.
include/
* opcode/aarch64.h (AARCH64_CPU_HAS_ALL_FEATURES): New.
(AARCH64_CPU_HAS_ANY_FEATURES): New.
(AARCH64_CPU_HAS_FEATURE): Define as AARCH64_CPU_HAS_ALL_FEATURES.
(AARCH64_OPCODE_HAS_FEATURE): Remove.
binutuils* prdbg.c (pr_enum_type): Use a buffer big enough to hold an
extremely large decimal value.
(pr_range_type): Likewise.
(pr_array_type): Likewise.
(pr_struct_field): Likewise.
(pr_class_baseclass): Likewise.
(pr_class_method_variant): Likewise.
(pr_tag_type): Likewise.
(pr_int_constant): Likewise.
(pr_typed_constant): Likewise.
(pr_variable): Likewise.
(pr_function_parameter): Likewise.
(pr_start_block): Likewise.
(pr_lineno): Likewise.
(pr_end_block): Likewise.
(tg_enum_type): Likewise.
(tg_int_constant): Likewise.
(tg_typed_constant): Likewise.
(tg_start_block): Likewise.
gas * macro.c (macro_expand_body): Use a buffer big enough to hold an
extremely large integer.
While address overrides are ignored in 64-bit mode (and hence shouldn't
really result in an error, but upon v1 converting this to a warning I
was told otherwise), trying to use 16-bit addressing is documented to
result in #UD, and hence the assembler should reject the attempt. (The
added test case at once also checks that bndc{l,n,u} won't accept
16-bit register operands.)
... due to their last byte looking like a suffix, when after its
stripping a matching instruction can be found. Since memory operand
size specifiers in Intel mode get converted into suffix representation
internally, we need to keep track of the actual mnemonic suffix which
may have got trimmed off, and check its validity while looking for a
matching template. I tripper over this quite some time again after
support for AMD's SSE5 instructions got removed, as at that point some
of the SSE5 mnemonics, other than expected, didn't fail to assemble.
But the problem affects many more instructions, namely (almost) all
MMX, SSE, and AVX ones as it looks. I don't think it makes sense to
add a testcase covering all of them, nor do I think it makes sense to
pick out some random examples for a new test case.
... just like is already the case for 16- and 32-bit movzb: I can't see
why omitting suffixes on this (and movs{b,w,l}) is not allowed, when it
is allowed for all other instructions where the suffix is redundant
with (one of) the operands.
The dual purpose mnemonic (string move vs scalar double move) breaks
the assumption that the isstring flag would be set on both the first
and last entry in the current set of templates, which results in bogus
or missing diagnostics for the string move variant of the mnemonic.
Short of mostly rewriting i386_index_check() and its interaction with
the rest of the code, simply shrink the template set to just string
instructions when encountering the second memory operand, and run
i386_index_check() a second time for the first memory operand after
that reduction.
Fix an assertion failure like:
test.s: Assembler messages:
test.s:3: Internal error!
Assertion failure in append_insn at .../gas/config/tc-mips.c:7523.
Please report this bug.
triggered by assembling MIPS16 code like:
hello:
addiu $4, $4, 4
jr $31
with the generation of a listing file enabled, e.g.:
$ as -mips16 -O2 -aln=test.lst
The cause of the problem is the lack of support for moving instructions
across frags in MIPS16 jump swapping, which triggers more easily with
listing enabled as in that case every instruction gets placed in its own
frag. It would trigger even with listing disabled though if the
instruction to swap a MIPS16 jump with was unfortunately enough placed
as last in a frag that became full.
This scenario is already handled correctly with branch swapping in
regular MIPS and microMIPS code, so reuse it for MIPS16 code as well,
and now that all MIPS16 handling has become the same as the regular MIPS
and microMIPS cases remove MIPS16 special casing altogether.
This effectively complements:
commit 464ab0e55a
Author: Maciej W. Rozycki <macro@linux-mips.org>
Date: Mon Aug 6 20:33:00 2012 +0000
<https://sourceware.org/ml/binutils/2012-08/msg00043.html>, ("MIPS/GAS:
Correct microMIPS branch swapping assertion") for the MIPS16 case.
The assertion itself was introduced with:
commit 1e91584932
Author: Richard Sandiford <rdsandiford@googlemail.com>
Date: Wed Mar 9 09:17:02 2005 +0000
<https://sourceware.org/ml/binutils/2005-03/msg00217.html>, ("Rework
MIPS nop-insertion code, add -mfix-vr4130 [5/11]"), but its introduction
merely noted our existing lack of support for MIPS16 jump swapping
across frags.
gas/
* config/tc-mips.c (append_insn) <APPEND_SWAP>: Do not special
case MIPS16 handling.
* testsuite/gas/mips/branch-swap-3.d: New test.
* testsuite/gas/mips/branch-swap-4.d: New test.
* testsuite/gas/mips/mips16@branch-swap-3.d: New test.
* testsuite/gas/mips/mips16@branch-swap-4.d: New test.
* testsuite/gas/mips/micromips@branch-swap-3.d: New test.
* testsuite/gas/mips/micromips@branch-swap-4.d: New test.
* testsuite/gas/mips/branch-swap-3.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Simplify non-MIPS16 branch swapping by copying the MIPS16 variant, which
sets the new position for the current instruction first and reduces the
calculation of the new position of the previous instruction. Also refer
to previous instruction's frag and position via `delay' for consistency.
Reintroduce an explanatory comment, updated, previously removed with:
commit 1e91584932
Author: Richard Sandiford <rdsandiford@googlemail.com>
Date: Wed Mar 9 09:17:02 2005 +0000
<https://sourceware.org/ml/binutils/2005-03/msg00217.html>, ("Rework
MIPS nop-insertion code, add -mfix-vr4130 [5/11]").
gas/
* config/tc-mips.c (append_insn): Simplify non-MIPS16 branch
swapping sequence.
