Assert size of elf_x86_64_bnd_plt2_entry and elf_x86_64_legacy_plt2_entry
only in elf_x86_64_check_relocs.
* elf64-x86-64.c (elf_x86_64_check_relocs): Assert size of
elf_x86_64_bnd_plt2_entry and elf_x86_64_legacy_plt2_entry.
(elf_x86_64_allocate_dynrelocs): Don't assert size of
elf_x86_64_bnd_plt2_entry and elf_x86_64_legacy_plt2_entry.
A recent change...
commit 1a853c5224
Date: Wed Nov 12 10:10:49 2014 +0000
Subject: make "permanent breakpoints" per location and disableable
... broke function calls on sparc-elf when running over QEMU. Any
function call should demonstrate the problem.
For instance, seen from the debugger:
(gdb) call pn(1234)
[Inferior 1 (Remote target) exited normally]
The program being debugged exited while in a function called from GDB.
Evaluation of the expression containing the function
And seen from QEMU:
qemu: fatal: Trap 0x02 while interrupts disabled, Error state
[register dump removed]
What happens in this case is that GDB sets the inferior function call
by not only creating the dummy frame, but also writing a breakpoint
instruction at the return address for our function call. See infcall.c:
/* Write a legitimate instruction at the point where the infcall
breakpoint is going to be inserted. While this instruction
is never going to be executed, a user investigating the
memory from GDB would see this instruction instead of random
uninitialized bytes. We chose the breakpoint instruction
as it may look as the most logical one to the user and also
valgrind 3.7.0 needs it for proper vgdb inferior calls.
If software breakpoints are unsupported for this target we
leave the user visible memory content uninitialized. */
bp_addr_as_address = bp_addr;
bp_bytes = gdbarch_breakpoint_from_pc (gdbarch, &bp_addr_as_address,
&bp_size);
if (bp_bytes != NULL)
write_memory (bp_addr_as_address, bp_bytes, bp_size);
This instruction triggers a change introduced by the commit above,
where we consider bp locations as being permanent breakpoints
if there is already a breakpoint instruction at that address:
+ if (bp_loc_is_permanent (loc))
+ {
+ loc->inserted = 1;
+ loc->permanent = 1;
+ }
As a result, when resuming the program's execution for the inferior
function call, GDB decides that it does not need to insert a breakpoint
at this address, expecting the target to just report a SIGTRAP when
trying to execute that instruction.
But unfortunately for us, at least some versions of QEMU for SPARC
just terminate the execution entirely instead of reporting a breakpoint,
thus producing the behavior reported here.
Although it appears like QEMU might be misbehaving and should therefore
be fixed (to be verified) from the user's point of view, the recent
change does introduce a regression. So this patch tries to mitigate
a bit the damage by handling such infcall breakpoints as special and
making sure that they are never considered permanent, thus restoring
the previous behavior specifically for those breakpoints.
The option of not writing the breakpoint instructions in the first
place was considered, and would probably work also. But the comment
associated to it seems to indicate that there is still reason to
keep it.
gdb/ChangeLog:
* breakpoint.c (bp_loc_is_permanent): Return 0 if LOC corresponds
to a bp_call_dummy breakpoint type.
Tested on x86_64-linux. Also testing on sparc-elf/QEMU using
AdaCore's testsuite.
SA_RESTART allows system calls to be restarted across a signal handler.
By specifying this flag we fix the issue where if the user is being
prompted to answer yes or no, and the terminal gets resized in the
meantime, the prompt will think that the user sent an EOF and so it will
take the default action for that prompt (in the case of the quit prompt,
it will quit GDB).
gdb/ChangeLog:
* tui/tui-win.c (tui_initialize_win): Specify SA_RESTART when
registering the signal handler.
This patch fixes the annoying bug where key sequences such as Alt_F or
Alt_B (go forward or backwards by a word) do not behave promptly in TUI.
You have to press a third key in order for the key sequence to register.
This is mostly ncurses' fault. Calling wgetch() normally causes ncurses
to read only a single key from stdin. However if the key read is the
start-sequence key (^[ a.k.a. ESC) then wgetch() reads TWO keys from
stdin, storing the 2nd key into an internal FIFO buffer and returning
the start-sequence key. The extraneous read of the 2nd key makes us
miss its corresponding stdin event, so the event loop blocks until a
third key is pressed. This explains why such key sequences do not
behave promptly in TUI.
To fix this issue, we must somehow compensate for the missed stdin event
corresponding to the 2nd byte of a key sequence. This patch achieves
this by hacking up the stdin event handler to conditionally execute the
readline callback multiple times in a row. This is done via a new
global variable, call_stdin_event_handler_again_p, which is set from
tui_getc() when we receive a start-sequence key and notice extra pending
input in the ncurses buffer.
Tested on x86_64-unknown-linux-gnu.
gdb/ChangeLog:
* event-top.h (call_stdin_event_handler_again_p): Declare.
* event-top.c (call_stdin_event_handler_again_p): Define.
(stdin_event_handler): Use it.
* tui/tui-io.c (tui_getc): Prepare to call the stdin event
handler again if there is pending input following a
start sequence.
This way the user can know the index of the latest checkpoint without
having to run "info checkpoints" afterwards.
gdb/ChangeLog:
* linux-fork.c (checkpoint_command): Print index of new
checkpoint in response message.
In read_string, we have this line
chunksize = (len == -1 ? min (8, fetchlimit) : fetchlimit);
but chunksize is only used in the block that lne == -1, so IWBN to
move chunksize to the block in which it is used, and simplify the
condition setting chunksize. This patch also moves 'found_nul' to
inner block. This patch also splits a paragraph of comment into two,
and move them to different condition blocks (len > 0 and len == -1)
respectively.
gdb:
2014-11-23 Yao Qi <yao@codesourcery.com>
* valprint.c (read_string): Move local variables 'found_nul',
'chunksize' and 'limit' to inner scope. Update comments.
Displacement of branch to PLT0 in x86-64 PLT entry is signed 32-bit.
This patch adds a sanity check. We will only see the failure when PLT
size is > 2GB.
* elf64-x86-64.c (elf_x86_64_finish_dynamic_symbol): Check
branch displacement overflow in PLT entry.
MACRO_AT_func can be used in gdb.trace/entry-values.exp to correctly
get function's address in generated debug info. As a result, the test
is more friendly to clang. Currently, there are some fails in
entry-values.exp when the test is compiled by clang. With this patch
applied, all fails go away.
gdb/testsuite:
2014-11-22 Yao Qi <yao@codesourcery.com>
* gdb.trace/entry-values.c: Remove asms.
(foo): Add foo_label.
(bar): Add bar_label.
* gdb.trace/entry-values.exp: Remove code computing foo's
length and bar's length.
(Dwarf::assemble): Invoke function_range for bar and use
MACRO_AT_func for foo.
This patch fixes two fails in dw2-compdir-oldgcc.exp I've seen on arm
target thumb mode.
FAIL: gdb.dwarf2/dw2-compdir-oldgcc.exp: info source gcc42
FAIL: gdb.dwarf2/dw2-compdir-oldgcc.exp: info source gcc43
When fill in DW_AT_low_pc, the label should be used rather than the
function, otherwise, the LSB bit of the address in DW_AT_low_pc is
set and the debug info is wrong. This patch is to add two labels for
functions gcc42 and gcc43 respectively, and use them. These two
fails are fixed.
gdb/testsuite:
2014-11-22 Yao Qi <yao@codesourcery.com>
* gdb.dwarf2/dw2-compdir-oldgcc.S: Define label .Lgcc42_procstart
and .Lgcc43_procstart. Use .Lgcc42_procstart instead of gcc42.
Use .Lgcc43_procstart instead of gcc43.
PR binutils/17512
* dwarf.c (get_encoded_value): Check for an encoded size of 0.
(display_debug_lines_raw): Check for an invalid line range value.
(display_debug_frames): Check for corrupt augmentation data.
* coffgen.c (coff_get_normalized_symtab): Check for an excessive
number of auxillary entries.
* ieee.c (next_byte): Convert to a function. Return FALSE if the
next byte is beyond the end of the buffer.
(parse_int): Test the return value of next_byte.
(parse_expression): Convert to boolean. Return FALSE if the
parsing failed. Test the return value of next_byte.
(ieee_seek): Convert to a function. Return FALSE if the seek goes
beyond the end of the buffer.
(ieee_slurp_external_symbols): Test the return value of ieee_seek
and next_byte.
(ieee_slurp_sections): Convert to boolean. Return FALSE if the
operation failed. Test the return value of ieee_seek and
next_byte.
(ieee_archive_p): Test the return value of ieee_seek and
next_byte.
(do_one): Likewise.
(ieee_slurp_section_data): Likewise.
(ieee_object_p): Likewise. Store the size of the buffer in the
total_amt field in the header.
* libieee.h (common_header_type): Add amt field.
* mach-o.c (bfd_mach_o_canonicalize_one_reloc): Check that the
reloc's value is within range.
(bfd_mach_o_read_symtab_symbols): Nullify the symbols field if the
operation fails.
* pei-x86_64.c (pex64_xdata_print_uwd_codes): Replace abort with
an error message.
(pex64_dump_xdata): Check for buffer overflows.
* versados.c (process_otr): Check that the section exists before
taking its size.
(versados_object_p): Make sure that enough data was read for the
header to be checked.
* vms-alpha.c (vms_get_remaining_object_record): Change
read_so_far parameter to an unsigned int. Check that the amount
read is in range.
errno.h is included in common/common-defs.h, and gnulib errno module
was imported to gdb. This patch is to import it explicitly.
gdb:
* gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add
errno.
* gnulib/import/Makefile.am: Re-generated.
* gnulib/import/Makefile.in: Likewise.
* gnulib/import/m4/gnulib-cache.m4: Likewise.
As gnulib modules wchar and wctype is imported, we can include wchar.h
and wctype.h unconditionally. This patch is also to remove HAVE_WCHAR_H
check.
gdb:
2014-11-21 Yao Qi <yao@codesourcery.com>
* gdb_wchar.h: Include wchar.h and wctype.h.
[HAVE_ICONV && HAVE_BTOWC]: Don't check HAVE_WCHAR_T and don't
include wchar.h and wctype.h.
Don't check HAVE_WCHAR_H.
gnulib module wchar and wctype-h was imported as a dependency, but
they are used by gdb_wchar.h too. This patch is to import them
explicitly.
gdb:
* gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add wchar
and wctype-h.
* gnulib/import/Makefile.am: Re-generated.
* gnulib/import/Makefile.in: Likewise.
* gnulib/import/m4/gnulib-cache.m4: Likewise.
memchr has been used in gdb source and gnulib memchr module was
imported as a dependency. This patch is to import it explicitly.
gdb:
* gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add
memchr.
* gnulib/import/Makefile.am: Re-generated.
* gnulib/import/Makefile.in: Likewise.
* gnulib/import/m4/gnulib-cache.m4: Likewise.
Since gnulib alloca module was imported, we can include alloca.h in
both gdb and gdbserver unconditionally, so this patch adds inclusion
of alloca.h in common-defs.h. This patch also removes AC_FUNC_ALLOCA
in configure.ac because we don't need to check alloca any more.
This patch below is removed in fact.
[RFA/commit] include alloca.h if available.
https://www.sourceware.org/ml/gdb-patches/2010-08/msg00566.html
Since alloca.h is from gnulib now, we don't have to check malloc.h in
configure and include malloc.h in code. This patch also remove them
too.
gdb:
2014-11-21 Yao Qi <yao@codesourcery.com>
* common/common-defs.h: Include alloca.h
* configure.ac: Don't invoke AC_FUNC_ALLOCA.
* configure: Re-generated.
* defs.h: Remove code handling alloca.
* utils.c (gdb_realpath): Don't check HAVE_ALLOCA is defined
or not.
gdb/gdbserver:
2014-11-21 Yao Qi <yao@codesourcery.com>
* configure.ac: Don't invoke AC_FUNC_ALLOCA.
(AC_CHECK_HEADERS): Remove malloc.h.
* configure: Re-generated.
* config.in: Re-generated.
* server.h: Don't include alloca.h and malloc.h.
* gdbreplay.c: Don't check HAVE_ALLOCA_H is defined.
Don't include malloc.h.
gnulib's alloca module was imported to gdb, and alloca is used. This
patch is to explicitly import it.
gdb:
* gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULE): Add
alloca.
* gnulib/import/Makefile.am: Re-generated.
* gnulib/import/Makefile.in: Likewise..
* gnulib/import/m4/gnulib-cache.m4: Likewise.
Since we'll add more modules in this list, better to keep them in
alphabetical order.
gdb:
* gnulib/update-gnulib.sh: Make IMPORTED_GNULIB_MODULES in
alphabetical order.
gas/
2014-11-21 Terry Guo <terry.guo@arm.com>
* config/tc-arm.c (md_assemble): Do not consider relaxation.
(md_convert_frag): Test and set target arch attribute accordingly.
(aeabi_set_attribute_string): Turn it into a global function.
* config/tc-arm.h (md_post_relax_hook): Enable it for ARM target.
(aeabi_set_public_attributes): Declare it.
gas/testsuite/
2014-11-21 Terry Guo <terry.guo@arm.com>
* gas/arm/attr-arch-assumption.d: New file.
* gas/arm/attr-arch-assumption.s: Likewise.
ld/testsuite/
2014-11-21 Terry Guo <terry.guo@arm.com>
* ld-arm/tls-longplt-lib.s: Require ARMv6T2.
* ld-arm/tls-longplt.s: Likewise.
* ld-arm/tls-longplt-lib.d: Updated.
* ld-arm/tls-longplt.d: Likewise.
Consider the following variable declaration:
type Array_Type is array (Integer range <>) of Integer;
Var: Array_Type (0 .. -1);
"ptype var" prints the wrong upper bound for that array:
(gdb) ptype var
type = array (0 .. 4294967295) of integer
The debugging info for the type of variable "Var" is as follow:
<2><cf>: Abbrev Number: 13 (DW_TAG_structure_type)
<d0> DW_AT_name : foo__var___PAD
<3><db>: Abbrev Number: 14 (DW_TAG_member)
<dc> DW_AT_name : F
<e0> DW_AT_type : <0xa5>
This is just an artifact from code generation, which is just
a wrapper that we should ignore. The real type is the type of
field "F" in that PAD type, which is described as:
<2><a5>: Abbrev Number: 10 (DW_TAG_array_type)
<a6> DW_AT_name : foo__TvarS
<3><b6>: Abbrev Number: 11 (DW_TAG_subrange_type)
<b7> DW_AT_type : <0xc1>
<bb> DW_AT_lower_bound : 0
<bc> DW_AT_upper_bound : 0xffffffff
Trouble occurs because DW_AT_upper_bound is encoded using
a DW_FORM_data4, which is ambiguous regarding signedness.
In that case, dwarf2read.c::dwarf2_get_attr_constant_value
reads the value as unsigned, which is not what we want
in this case.
As it happens, we already have code dealing with this situation
in dwarf2read.c::read_subrange_type which checks whether
the subrange's type is signed or not, and if it is, fixes
the bound's value by sign-extending it:
if (high.kind == PROP_CONST
&& !TYPE_UNSIGNED (base_type) && (high.data.const_val & negative_mask))
high.data.const_val |= negative_mask;
Unfortunately, what happens in our case is that the base type
of the array's subrange type is marked as being unsigned, and
so we never get to apply the sign extension. Following the DWARF
trail, the range's base type is described as another subrange type...
<2><c1>: Abbrev Number: 12 (DW_TAG_subrange_type)
<c7> DW_AT_name : foo__TTvarSP1___XDLU_0__1m
<cb> DW_AT_type : <0x2d>
... whose base type is, (finally), a basic type (signed):
<1><2d>: Abbrev Number: 2 (DW_TAG_base_type)
<2e> DW_AT_byte_size : 4
<2f> DW_AT_encoding : 5 (signed)
<30> DW_AT_name : integer
The reason why GDB thinks that foo__TTvarSP1___XDLU_0__1m
(the base type of the array's range type) is an unsigned type
is found in gdbtypes.c::create_range_type. We consider that
a range type is unsigned iff its lower bound is >= 0:
if (low_bound->kind == PROP_CONST && low_bound->data.const_val >= 0)
TYPE_UNSIGNED (result_type) = 1;
That is normally sufficient, as one would expect the upper bound to
always be greater or equal to the lower bound. But Ada actually
allows the declaration of empty range types where the upper bound
is less than the lower bound. In this case, the upper bound is
negative, so we should not be marking the type as unsigned.
This patch fixes the issue by simply checking the upper bound as well
as the lower bound, and clears the range type's unsigned flag when
it is found to be constant and negative.
gdb/ChangeLog:
* gdbtypes.c (create_range_type): Unset RESULT_TYPE's
flag_unsigned if HIGH_BOUND is constant and negative.
gdb/testsuite/ChangeLog:
* gdb.ada/n_arr_bound: New testcase.
Tested on x86_64-linux.
This patch makes sure that compiler won't optimize out loading function
into a stack variable.
* ld-ifunc/ifunc-main.c (get_bar): New function.
(main): Use it.
In the previous commit, I forgot to adjust the prototypes of the
functions inside gdb/xml-syscall.c for the case when GDB is compiled
without XML support.
gdb/
2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com>
PR breakpoints/10737
* xml-syscall.c (set_xml_syscall_file_name): Remove "const"
modifier from "struct gdbarch" when compiling without Expat (XML)
support.
(get_syscall_by_number): Likewise.
(get_syscall_by_name): Likewise.
(get_syscall_names): Likewise.
This patch intends to partially fix PR breakpoints/10737, which is
about making the syscall information (for the "catch syscall" command)
be per-arch, instead of global. This is not a full fix because of the
other issues pointed by Pedro here:
<https://sourceware.org/bugzilla/show_bug.cgi?id=10737#c5>
However, I consider it a good step towards the real fix. It will also
help me fix <https://sourceware.org/bugzilla/show_bug.cgi?id=17402>.
What this patch does, basically, is move the "syscalls_info"
struct to gdbarch. Currently, the syscall information is stored in a
global variable inside gdb/xml-syscall.c, which means that there is no
easy way to correlate this info with the current target or
architecture being used, for example. This causes strange behaviors,
because the syscall info is not re-read when the arch changes. For
example, if you put a syscall catchpoint in syscall 5 on i386 (syscall
open), and then load a x86_64 program on GDB and put the same syscall
5 there (fstat on x86_64), you will still see that GDB tells you that
it is catching "open", even though it is not. With this patch, GDB
correctly says that it will be catching fstat syscalls.
(gdb) set architecture i386
The target architecture is assumed to be i386
(gdb) catch syscall 5
Catchpoint 1 (syscall 'open' [5])
(gdb) set architecture i386:x86-64
The target architecture is assumed to be i386:x86-64
(gdb) catch syscall 5
Catchpoint 2 (syscall 'open' [5])
But with the patch:
(gdb) set architecture i386
The target architecture is assumed to be i386
(gdb) catch syscall 5
Catchpoint 1 (syscall 'open' [5])
(gdb) set architecture i386:x86-64
The target architecture is assumed to be i386:x86-64
(gdb) catch syscall 5
Catchpoint 2 (syscall 'fstat' [5])
As I said, there are still some problems on the "catch syscall"
mechanism, because (for example) the user should be able to "catch
syscall open" on i386, and then expect "open" to be caught also on
x86_64. Currently, it doesn't work. I intend to work on this later.
gdb/
2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com>
PR breakpoints/10737
* amd64-linux-tdep.c (amd64_linux_init_abi_common): Adjust call to
set_xml_syscall_file_name to provide gdbarch.
* arm-linux-tdep.c (arm_linux_init_abi): Likewise.
* bfin-linux-tdep.c (bfin_linux_init_abi): Likewise.
* breakpoint.c (print_it_catch_syscall): Adjust call to
get_syscall_by_number to provide gdbarch.
(print_one_catch_syscall): Likewise.
(print_mention_catch_syscall): Likewise.
(print_recreate_catch_syscall): Likewise.
(catch_syscall_split_args): Adjust calls to get_syscall_by_number
and get_syscall_by_name to provide gdbarch.
(catch_syscall_completer): Adjust call to get_syscall_names to
provide gdbarch.
* gdbarch.c: Regenerate.
* gdbarch.h: Likewise.
* gdbarch.sh: Forward declare "struct syscalls_info".
(xml_syscall_file): New variable.
(syscalls_info): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Adjust call to
set_xml_syscall_file_name to provide gdbarch.
* mips-linux-tdep.c (mips_linux_init_abi): Likewise.
* ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* sparc-linux-tdep.c (sparc32_linux_init_abi): Likewise.
* sparc64-linux-tdep.c (sparc64_linux_init_abi): Likewise.
* xml-syscall.c: Include gdbarch.h.
(set_xml_syscall_file_name): Accept gdbarch parameter.
(get_syscall_by_number): Likewise.
(get_syscall_by_name): Likewise.
(get_syscall_names): Likewise.
(my_gdb_datadir): Delete global variable.
(struct syscalls_info) <my_gdb_datadir>: New variable.
(struct syscalls_info) <sysinfo>: Rename variable to
"syscalls_info".
(sysinfo): Delete global variable.
(have_initialized_sysinfo): Likewise.
(xml_syscall_file): Likewise.
(sysinfo_free_syscalls_desc): Rename to...
(syscalls_info_free_syscalls_desc): ... this.
(free_syscalls_info): Rename "sysinfo" to "syscalls_info". Adjust
code to the new layout of "struct syscalls_info".
(make_cleanup_free_syscalls_info): Rename parameter "sysinfo" to
"syscalls_info".
(syscall_create_syscall_desc): Likewise.
(syscall_start_syscall): Likewise.
(syscall_parse_xml): Likewise.
(xml_init_syscalls_info): Likewise. Drop "const" from return value.
(init_sysinfo): Rename to...
(init_syscalls_info): ...this. Add gdbarch as a parameter.
Adjust function to deal with gdbarch.
(xml_get_syscall_number): Delete parameter sysinfo. Accept
gdbarch as a parameter. Adjust code.
(xml_get_syscall_name): Likewise.
(xml_list_of_syscalls): Likewise.
(set_xml_syscall_file_name): Accept gdbarch as parameter.
(get_syscall_by_number): Likewise.
(get_syscall_by_name): Likewise.
(get_syscall_names): Likewise.
* xml-syscall.h (set_xml_syscall_file_name): Likewise.
(get_syscall_by_number): Likewise.
(get_syscall_by_name): Likewise.
(get_syscall_names): Likewise.
gdb/testsuite/
2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com>
PR breakpoints/10737
* gdb.base/catch-syscall.exp (do_syscall_tests): Call
test_catch_syscall_multi_arch.
(test_catch_syscall_multi_arch): New function.
Currently "symtabs" in gdb are stored as a single linked list of
struct symtab that contains both symbol symtabs (the blockvectors)
and file symtabs (the linetables).
This has led to confusion, bugs, and performance issues.
This patch is conceptually very simple: split struct symtab into
two pieces: one part containing things common across the entire
compilation unit, and one part containing things specific to each
source file.
Example.
For the case of a program built out of these files:
foo.c
foo1.h
foo2.h
bar.c
foo1.h
bar.h
Today we have a single list of struct symtabs:
objfile -> foo.c -> foo1.h -> foo2.h -> bar.c -> foo1.h -> bar.h -> NULL
where "->" means the "next" pointer in struct symtab.
With this patch, that turns into:
objfile -> foo.c(cu) -> bar.c(cu) -> NULL
| |
v v
foo.c bar.c
| |
v v
foo1.h foo1.h
| |
v v
foo2.h bar.h
| |
v v
NULL NULL
where "foo.c(cu)" and "bar.c(cu)" are struct compunit_symtab objects,
and the files foo.c, etc. are struct symtab objects.
So now, for example, when we want to iterate over all blockvectors
we can now just iterate over the compunit_symtab list.
Plus a lot of the data that was either unused or replicated for each
symtab in a compilation unit now lives in struct compunit_symtab.
E.g., the objfile pointer, the producer string, etc.
I thought of moving "language" out of struct symtab but there is
logic to try to compute the language based on previously seen files,
and I think that's best left as is for now.
With my standard monster benchmark with -readnow (which I can't actually
do, but based on my calculations), whereas today the list requires
77MB to store all the struct symtabs, it now only requires 37MB.
A modest space savings given the gigabytes needed for all the debug info,
etc. Still, it's nice. Plus, whereas today we create a copy of dirname
for each source file symtab in a compilation unit, we now only create one
for the compunit.
So this patch is basically just a data structure reorg,
I don't expect significant performance improvements from it.
Notes:
1) A followup patch can do a similar split for struct partial_symtab.
I have left that until after I get the changes I want in to
better utilize .gdb_index (it may affect how we do partial syms).
2) Another followup patch *could* rename struct symtab.
The term "symtab" is ambiguous and has been a source of confusion.
In this patch I'm leaving it alone, calling it the "historical" name
of "filetabs", which is what they are now: just the file-name + line-table.
gdb/ChangeLog:
Split struct symtab into two: struct symtab and compunit_symtab.
* amd64-tdep.c (amd64_skip_xmm_prologue): Fetch producer from compunit.
* block.c (blockvector_for_pc_sect): Change "struct symtab *" argument
to "struct compunit_symtab *". All callers updated.
(set_block_compunit_symtab): Renamed from set_block_symtab. Change
"struct symtab *" argument to "struct compunit_symtab *".
All callers updated.
(get_block_compunit_symtab): Renamed from get_block_symtab. Change
result to "struct compunit_symtab *". All callers updated.
(find_iterator_compunit_symtab): Renamed from find_iterator_symtab.
Change result to "struct compunit_symtab *". All callers updated.
* block.h (struct global_block) <compunit_symtab>: Renamed from symtab.
hange type to "struct compunit_symtab *". All uses updated.
(struct block_iterator) <d.compunit_symtab>: Renamed from "d.symtab".
Change type to "struct compunit_symtab *". All uses updated.
* buildsym.c (struct buildsym_compunit): New struct.
(subfiles, buildsym_compdir, buildsym_objfile, main_subfile): Delete.
(buildsym_compunit): New static global.
(finish_block_internal): Update to fetch objfile from
buildsym_compunit.
(make_blockvector): Delete objfile argument.
(start_subfile): Rewrite to use buildsym_compunit. Don't initialize
debugformat, producer.
(start_buildsym_compunit): New function.
(free_buildsym_compunit): Renamed from free_subfiles_list.
All callers updated.
(patch_subfile_names): Rewrite to use buildsym_compunit.
(get_compunit_symtab): New function.
(get_macro_table): Delete argument comp_dir. All callers updated.
(start_symtab): Change result to "struct compunit_symtab *".
All callers updated. Create the subfile of the main source file.
(watch_main_source_file_lossage): Rewrite to use buildsym_compunit.
(reset_symtab_globals): Update.
(end_symtab_get_static_block): Update to use buildsym_compunit.
(end_symtab_without_blockvector): Rewrite.
(end_symtab_with_blockvector): Change result to
"struct compunit_symtab *". All callers updated.
Update to use buildsym_compunit. Don't set symtab->dirname,
instead set it in the compunit.
Explicitly make sure main symtab is first in its list.
Set debugformat, producer, blockvector, block_line_section, and
macrotable in the compunit.
(end_symtab_from_static_block): Change result to
"struct compunit_symtab *". All callers updated.
(end_symtab, end_expandable_symtab): Ditto.
(set_missing_symtab): Change symtab argument to
"struct compunit_symtab *". All callers updated.
(augment_type_symtab): Ditto.
(record_debugformat): Update to use buildsym_compunit.
(record_producer): Update to use buildsym_compunit.
* buildsym.h (struct subfile) <dirname>: Delete.
<producer, debugformat>: Delete.
<buildsym_compunit>: New member.
(get_compunit_symtab): Declare.
* dwarf2read.c (struct type_unit_group) <compunit_symtab>: Renamed
from primary_symtab. Change type to "struct compunit_symtab *".
All uses updated.
(dwarf2_start_symtab): Change result to "struct compunit_symtab *".
All callers updated.
(dwarf_decode_macros): Delete comp_dir argument. All callers updated.
(struct dwarf2_per_cu_quick_data) <compunit_symtab>: Renamed from
symtab. Change type to "struct compunit_symtab *". All uses updated.
(dw2_instantiate_symtab): Change result to "struct compunit_symtab *".
All callers updated.
(dw2_find_last_source_symtab): Ditto.
(dw2_lookup_symbol): Ditto.
(recursively_find_pc_sect_compunit_symtab): Renamed from
recursively_find_pc_sect_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(dw2_find_pc_sect_compunit_symtab): Renamed from
dw2_find_pc_sect_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(get_compunit_symtab): Renamed from get_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(recursively_compute_inclusions): Change type of immediate_parent
argument to "struct compunit_symtab *". All callers updated.
(compute_compunit_symtab_includes): Renamed from
compute_symtab_includes. All callers updated. Rewrite to compute
includes of compunit_symtabs and not symtabs.
(process_full_comp_unit): Update to work with struct compunit_symtab.
(process_full_type_unit): Ditto.
(dwarf_decode_lines_1): Delete argument comp_dir. All callers updated.
(dwarf_decode_lines): Remove special case handling of main subfile.
(macro_start_file): Delete argument comp_dir. All callers updated.
(dwarf_decode_macro_bytes): Ditto.
* guile/scm-block.c (bkscm_print_block_syms_progress_smob): Update to
use struct compunit_symtab.
* i386-tdep.c (i386_skip_prologue): Fetch producer from compunit.
* jit.c (finalize_symtab): Build compunit_symtab.
* jv-lang.c (get_java_class_symtab): Change result to
"struct compunit_symtab *". All callers updated.
* macroscope.c (sal_macro_scope): Fetch macro table from compunit.
* macrotab.c (struct macro_table) <compunit_symtab>: Renamed from
comp_dir. Change type to "struct compunit_symtab *".
All uses updated.
(new_macro_table): Change comp_dir argument to cust,
"struct compunit_symtab *". All callers updated.
* maint.c (struct cmd_stats) <nr_compunit_symtabs>: Renamed from
nr_primary_symtabs. All uses updated.
(count_symtabs_and_blocks): Update to handle compunits.
(report_command_stats): Update output, "primary symtabs" renamed to
"compunits".
* mdebugread.c (new_symtab): Change result to
"struct compunit_symtab *". All callers updated.
(parse_procedure): Change type of search_symtab argument to
"struct compunit_symtab *". All callers updated.
* objfiles.c (objfile_relocate1): Loop over blockvectors in a
separate loop.
* objfiles.h (struct objfile) <compunit_symtabs>: Renamed from
symtabs. Change type to "struct compunit_symtab *". All uses updated.
(ALL_OBJFILE_FILETABS): Renamed from ALL_OBJFILE_SYMTABS.
All uses updated.
(ALL_OBJFILE_COMPUNITS): Renamed from ALL_OBJFILE_PRIMARY_SYMTABS.
All uses updated.
(ALL_FILETABS): Renamed from ALL_SYMTABS. All uses updated.
(ALL_COMPUNITS): Renamed from ALL_PRIMARY_SYMTABS. All uses updated.
* psympriv.h (struct partial_symtab) <compunit_symtab>: Renamed from
symtab. Change type to "struct compunit_symtab *". All uses updated.
* psymtab.c (psymtab_to_symtab): Change result type to
"struct compunit_symtab *". All callers updated.
(find_pc_sect_compunit_symtab_from_partial): Renamed from
find_pc_sect_symtab_from_partial. Change result type to
"struct compunit_symtab *". All callers updated.
(lookup_symbol_aux_psymtabs): Change result type to
"struct compunit_symtab *". All callers updated.
(find_last_source_symtab_from_partial): Ditto.
* python/py-symtab.c (stpy_get_producer): Fetch producer from compunit.
* source.c (forget_cached_source_info_for_objfile): Fetch debugformat
and macro_table from compunit.
* symfile-debug.c (debug_qf_find_last_source_symtab): Change result
type to "struct compunit_symtab *". All callers updated.
(debug_qf_lookup_symbol): Ditto.
(debug_qf_find_pc_sect_compunit_symtab): Renamed from
debug_qf_find_pc_sect_symtab, change result type to
"struct compunit_symtab *". All callers updated.
* symfile.c (allocate_symtab): Delete objfile argument.
New argument cust.
(allocate_compunit_symtab): New function.
(add_compunit_symtab_to_objfile): New function.
* symfile.h (struct quick_symbol_functions) <lookup_symbol>:
Change result type to "struct compunit_symtab *". All uses updated.
<find_pc_sect_compunit_symtab>: Renamed from find_pc_sect_symtab.
Change result type to "struct compunit_symtab *". All uses updated.
* symmisc.c (print_objfile_statistics): Compute blockvector count in
separate loop.
(dump_symtab_1): Update test for primary source symtab.
(maintenance_info_symtabs): Update to handle compunit symtabs.
(maintenance_check_symtabs): Ditto.
* symtab.c (set_primary_symtab): Delete.
(compunit_primary_filetab): New function.
(compunit_language): New function.
(iterate_over_some_symtabs): Change type of arguments "first",
"after_last" to "struct compunit_symtab *". All callers updated.
Update to loop over symtabs in each compunit.
(error_in_psymtab_expansion): Rename symtab argument to cust,
and change type to "struct compunit_symtab *". All callers updated.
(find_pc_sect_compunit_symtab): Renamed from find_pc_sect_symtab.
Change result type to "struct compunit_symtab *". All callers updated.
(find_pc_compunit_symtab): Renamed from find_pc_symtab.
Change result type to "struct compunit_symtab *". All callers updated.
(find_pc_sect_line): Only loop over symtabs within selected compunit
instead of all symtabs in the objfile.
* symtab.h (struct symtab) <blockvector>: Moved to compunit_symtab.
<compunit_symtab> New member.
<block_line_section>: Moved to compunit_symtab.
<locations_valid>: Ditto.
<epilogue_unwind_valid>: Ditto.
<macro_table>: Ditto.
<dirname>: Ditto.
<debugformat>: Ditto.
<producer>: Ditto.
<objfile>: Ditto.
<call_site_htab>: Ditto.
<includes>: Ditto.
<user>: Ditto.
<primary>: Delete
(SYMTAB_COMPUNIT): New macro.
(SYMTAB_BLOCKVECTOR): Update definition.
(SYMTAB_OBJFILE): Update definition.
(SYMTAB_DIRNAME): Update definition.
(struct compunit_symtab): New type. Common members among all source
symtabs within a compilation unit moved here. All uses updated.
(COMPUNIT_OBJFILE): New macro.
(COMPUNIT_FILETABS): New macro.
(COMPUNIT_DEBUGFORMAT): New macro.
(COMPUNIT_PRODUCER): New macro.
(COMPUNIT_DIRNAME): New macro.
(COMPUNIT_BLOCKVECTOR): New macro.
(COMPUNIT_BLOCK_LINE_SECTION): New macro.
(COMPUNIT_LOCATIONS_VALID): New macro.
(COMPUNIT_EPILOGUE_UNWIND_VALID): New macro.
(COMPUNIT_CALL_SITE_HTAB): New macro.
(COMPUNIT_MACRO_TABLE): New macro.
(ALL_COMPUNIT_FILETABS): New macro.
(compunit_symtab_ptr): New typedef.
(DEF_VEC_P (compunit_symtab_ptr)): New vector type.
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Update expected output.
GDB Administrator
Patrick Palka
H.J. Lu
Joel Brobecker
Yao Qi
Joel Sherrill
Doug Evans
Andrew Burgess
Nick Clifton
Doug Evans
Alexander Cherepanov
Terry Guo
Alan Modra
Sergio Durigan Junior
Richard Earnshaw