windows_thread_info_struct::sf is unused, as is
struct safe_symbol_file_add_args in windows-nat.c.
This patch removes them both. Tested by grep and
rebuilding.
gdb/ChangeLog
2019-10-08 Tom Tromey <tromey@adacore.com>
* windows-nat.c (struct windows_thread_info_struct) <sf>: Remove.
(struct safe_symbol_file_add_args): Remove.
I noticed that windows-nat.c includes buildsym-legacy.h -- but there's
no reason to do so, as windows-nat.c doesn't create any symbols.
gdb/ChangeLog
2019-10-08 Tom Tromey <tromey@adacore.com>
* windows-nat.c: Don't include buildsym-legacy.h.
As pointed out by Simon, this changes ARI to allow the gdb-specific %p
printf extensions.
gdb/ChangeLog
2019-10-08 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh (%p): Allow gdb-specific %p extensions.
Also makes it localizable.
gdb/ChangeLog:
2019-10-08 Christian Biesinger <cbiesinger@google.com>
* language.c (show_language_command): Pass lang_frame_mismatch_warn
through _().
(lang_frame_mismatch_warn): Make const, mark with N_(), and
move comment...
* language.h (lang_frame_mismatch_warn): ... here. Also add
declaration.
* top.c (lang_frame_mismatch_warn): Remove declaration.
(check_frame_language_change): Pass lang_frame_mismatch_warn
through _().
's' is both a command and a modifier. If given as a command then we
aren't lacking an operation. I think the same goes when mri mode is
selected: any following command line used to be ignored.
PR 25079
* ar.c (decode_options): Don't try for command options if
write_armap or mri_mode is selected.
This is the one that causes ld segfaults between 2019-10-04 and
2019-10-07. Bug introduced with f749f26eea, fixed by 93370e8e7b.
* testsuite/ld-powerpc/localgot.s,
* testsuite/ld-powerpc/localgot.d: New test.
* testsuite/ld-powerpc/powerpc.exp: Run it.
So far z15 was identified as arch13. After the machine has been
announced we can now add the real name.
gas/ChangeLog:
2019-10-08 Andreas Krebbel <krebbel@linux.ibm.com>
* config/tc-s390.c (s390_parse_cpu): Add z15 as alternate CPU
name.
* doc/as.texi: Add z15 to CPU string list.
* doc/c-s390.texi: Likewise.
opcodes/ChangeLog:
2019-10-08 Andreas Krebbel <krebbel@linux.ibm.com>
* s390-mkopc.c (main): Enable z15 as CPU string in the opcode
table.
There are conflicting comments about whether this was
introduced in GCC 2.4.5 or GCC 2.6 and I don't know
which one is correct...
gdb/ChangeLog:
2019-10-07 Christian Biesinger <cbiesinger@google.com>
* c-lang.h (vtbl_ptr_name): Declare.
* cp-valprint.c (vtbl_ptr_name): Remove "extern" now that we get
it from the header.
* stabsread.c (define_symbol): Remove declaration of vtbl_ptr_name.
It currently has a "manual" static assert.
gdb/ChangeLog:
2019-10-07 Christian Biesinger <cbiesinger@google.com>
* charset.c (your_gdb_wchar_t_is_bogus): Replace with a
gdb_static_assert.
This functionality will generate a new GNU object attribute for the "data region"
has been added. This object attribute is used
mark whether the compiler has generated code assuming that data could be in the
upper or lower memory regions.
Code which assumes data is always in the lower memory region is incompatible
with code which uses the full memory range for data.
The patch also adds a new assembler directive ".mspabi_attribute" to handle the
existing MSPABI object attributes. GCC will now emit both .gnu_attribute and
.mspabi_attribute directives to indicate what options the source file was
compiled with.
The assembler will now check the values set in these directives against the
options that the it has been invoked with. If there is a discrepancy, the
assembler will exit with an error.
bfd * elf32-msp430.c (elf32_msp430_merge_mspabi_attributes): Rename to..
(elf32_msp430_merge_msp430_attributes): Add support for merging the GNU
object attribute for data region.
binutils* readelf.c (display_msp430_gnu_attribute): New.
(process_arch_specific): Use msp430 specific handler for GNU
attributes.
gas * config/tc-msp430.c (md_parse_option): Set lower_data_region_only to
FALSE if the data region is set to "upper", "either" or "none".
(msp430_object_attribute): New.
(md_pseudo_table): Handle .mspabi_attribute and .gnu_attribute.
(msp430_md_end): Replace hard-coded attribute values with enums.
Handle data region object attribute.
* doc/as.texi: Document MSP430 Data Region object attribute.
* doc/c-msp430.texi: Document the .mspabi_attribute directive.
* testsuite/gas/msp430/attr-430-small-bad.d: New test.
* testsuite/gas/msp430/attr-430-small-bad.l: New test.
* testsuite/gas/msp430/attr-430-small-good.d: New test.
* testsuite/gas/msp430/attr-430-small.s: New test.
* testsuite/gas/msp430/attr-430x-large-any-bad.d: New test.
* testsuite/gas/msp430/attr-430x-large-any-bad.l: New test.
* testsuite/gas/msp430/attr-430x-large-any-good.d: New test.
* testsuite/gas/msp430/attr-430x-large-any.s: New test.
* testsuite/gas/msp430/attr-430x-large-lower-bad.d: New test.
* testsuite/gas/msp430/attr-430x-large-lower-bad.l: New test.
* testsuite/gas/msp430/attr-430x-large-lower-good.d: New test.
* testsuite/gas/msp430/attr-430x-large-lower.s: New test.
* testsuite/gas/msp430/msp430.exp: Run new tests.
include * elf/msp430.h: Add enums for MSPABI and GNU object attribute tag names
and values.
ld * testsuite/ld-msp430-elf/attr-gnu-main.s: New test.
* testsuite/ld-msp430-elf/attr-gnu-obj.s: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-lower-upper.d: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-lower.d: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-upper.d: New test.
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new tests.
A bug crept into commit f749f26eea, which could cause linker
segfaults when creating PIEs. This patch fixes it.
* elf64-ppc.c (ppc64_elf_size_dynamic_sections): Do allocate
space for local got non-tls relocs when PIE.
Update a test script to handle the case where missing Ada debug
information means we can't catch exceptions. This was discussed on
the list here:
https://sourceware.org/ml/gdb-patches/2019-08/msg00607.html
And is similar to code that already exists in the test scripts
gdb.ada/catch_ex.exp and gdb.ada/mi_catch_ex.exp.
gdb/testsuite/ChangeLog:
* gdb.ada/catch_ex_std.exp: Handle being unabled to catch Ada
exceptions due to missing debug information.
Commit:
commit 30d1f01849
Date: Mon Oct 7 00:46:52 2019 +0000
gdb: CTF support
Introduces some structures with names that are already in use within
GBB, this violates C++'s one-definition rule. Specifically the
structures 'nextfield' and 'field_info' are now defined in
dwarf2read.c and ctfread.c.
This commit renames the new structures (in ctfread.c), adding a 'ctf_'
prefix. Maybe we should consider renaming the DWARF versions too in
the future to avoid accidental conflicts.
gdb/ChangeLog:
* ctfread.c (struct nextfield): Renamed to ...
(struct ctf_nextfield): ... this.
(struct field_info): Renamed to ...
(strut ctf_field_info): ... this.
(attach_fields_to_type): Update for renamed structures.
(ctf_add_member_cb): Likewise.
(ctf_add_enum_member_cb): Likewise.
(process_struct_members): Likewise.
(process_enum_type): Likewise.
Now that commit "225f296a023 Change gdb/version.in to 9.0.50.DATE-git (new
version numbering scheme)" has changed the gdb version number, we see:
...
FAIL: gdb.base/default.exp: show convenience ($_gdb_major = 8 not found)
...
Fix this by updating the expected _gdb_major/_gdb_minor to 9.1.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2019-10-07 Tom de Vries <tdevries@suse.de>
* gdb.base/default.exp: Expect _gdb_major/_gdb_minor to be 9.1.
This commit adds a new feature to gdb_test_multiple, an automatically
created variable gdb_test_name. The idea is to make it easier to
write tests using gdb_test_multiple, and avoid places where the string
passed to pass/fail within an action element is different to the
message passed to the top level gdb_test_multiple.
As an example, previously you might write this:
gdb_test_multiple "print foo" "test foo" {
-re "expected output 1" {
pass "test foo"
}
-re "expected output 2" {
fail "test foo"
}
}
This is OK, but it's easy for the pass/fail strings to come out of
sync, or contain a typo. A better version would look like this:
set testname "test foo"
gdb_test_multiple "print foo" $testname {
-re "expected output 1" {
pass $testname
}
-re "expected output 2" {
fail $testname
}
}
This is better, but its a bit of a drag having to create a new
variable each time.
After this patch you can now write this:
gdb_test_multiple "print foo" "test foo" {
-re "expected output 1" {
pass $gdb_test_name
}
-re "expected output 2" {
fail $gdb_test_name
}
}
The $gdb_test_name is setup by gdb_test_multiple, and cleaned up once
the test has completed. Nested calls to gdb_test_multiple are
supported, though $gdb_test_name will only ever contain the inner most
test message (which is probably what you want).
My only regret is that '$gdb_test_name' is so long, but I wanted
something that was unlikely to clash with any existing variable name,
or anything that a user is likely to want to use.
I've tested this on x86-64/GNU Linux and see no test regressions, and
I've converted one test script over to make use of this new technique
both as an example, and to ensure that the new facility doesn't get
broken. I have no plans to convert all tests over to this technique,
but I hope others will find this useful for writing tests in the
future.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (gdb_test_multiple): Add gdb_test_name mechanism.
* gdb.base/annota1.exp: Update to use gdb_test_name.
First and foremost the EsSeg attribute was misplaced for CMPSD. Then
both it and MOVSD were lacking Dword on both of their operands.
Finally string insns with multiple operands and requiring use of ES:
had the wrong operand number reported in the diagnostic.
This patch is a result of noticing messages like the following:
tmpdir/tls32.o: in function `_start':
(.text+0x1c): unresolvable R_PPC_REL24 relocation against symbol `__tls_get_addr_opt'
./ld-new: final link failed: symbol needs debug section which does not exist
The "needs debug section" comes from attempting to use debug info to
find source line information to print the first error message. That
error isn't of interest to the user, and any previous bfd_error value
which might be of interest is overwritten. So save and restore
bfd_error around the fancy error reporting code.
That still doesn't leave us with a clean bfd_error. Now we get
./ld-new: final link failed: nonrepresentable section on output
An unresolvable relocation surely doesn't mean there is some bfd
section that ld doesn't know how to output! Digging into that showed
a _bfd_elf_section_from_bfd_section failure attempting to find an elf
section correcsponding to ".interp". So don't go looking for elf
sections on linker created bfd sections.
And then fix the linker testsuite which expected the bogus message..
bfd/
* elflink.c (elf_fixup_link_order): Don't attempt to find
an elf_section for linker created bfd sections.
ld/
* ldmisc.c (vfinfo): Save and restore bfd_error around bfd
function calls that might set it.
* testsuite/ld-elf/indirect.exp: Don't expect "nonrepresentable
section" message.
This patch adds some --no-tls-optimize tests and performs some of the
existing dynamic tests with tls markers in order to catch any
regression in PLT counting.
* testsuite/ld-powerpc/tlsexe.r: Adjust for added TLSMARK symbol.
* testsuite/ld-powerpc/tlsexe32.r: Likewise.
* testsuite/ld-powerpc/tlsso.r: Likewise.
* testsuite/ld-powerpc/tlsso32.r: Likewise.
* testsuite/ld-powerpc/tls32no.d,
* testsuite/ld-powerpc/tls32no.g: New test files.
* testsuite/ld-powerpc/tlsexe32no.d,
* testsuite/ld-powerpc/tlsexe32no.g,
* testsuite/ld-powerpc/tlsexe32no.r: New test files.
* testsuite/ld-powerpc/tlsexeno.d,
* testsuite/ld-powerpc/tlsexeno.g,
* testsuite/ld-powerpc/tlsexeno.r: New test files.
* testsuite/ld-powerpc/tlsexetocno.d,
* testsuite/ld-powerpc/tlsexetocno.g: New test files.
* testsuite/ld-powerpc/tlsno.d,
* testsuite/ld-powerpc/tlsno.g: New test files.
* testsuite/ld-powerpc/tlstocno.d,
* testsuite/ld-powerpc/tlstocno.g: New test files.
* testsuite/ld-powerpc/powerpc.exp: Run new tests.
ppc*_elf_tls_optimize decrements the PLT refcount for __tls_get_addr
when a GD or LD sequence can be optimized. Without tls marker relocs
this must be done when processing the argument setup relocations.
With marker relocs it's better done when processing the marker reloc.
But don't count them both ways.
Seen as "unresolvable R_PPC_REL24 relocation against symbol
`__tls_get_addr_opt'" (and other branch relocs).
* elf32-ppc.c (ppc_elf_tls_optimize): Don't process R_PPC_TLSLD
with non-local symbol. Don't double count __tls_get_addr calls
with marker relocs.
* elf64-ppc.c (ppc64_elf_tls_optimize): Likewise.
has_tls_get_addr_call is no longer named correctly as the flag is
only set on finding a __tls_get_addr call without tlsld/tlsgd marker
relocations.
* elf32-ppc.c (nomark_tls_get_addr): Rename from has_tls_get_addr_call
throughout.
* elf64-ppc.c (nomark_tls_get_addr): Likewise.
This patch adds the CTF (Compact Ansi-C Type Format) support in gdb.
Two submissions on which this gdb work depends were posted earlier
in May:
* On the binutils mailing list - adding libctf which creates, updates,
reads, and manipulates the CTF data.
* On the gcc mailing list - expanding gcc to directly emit the CFT data
with a new command line option -gt.
CTF is a reduced form of debugging information whose main purpose is to
describe the type of C entities such as structures, unions, typedefs and
function arguments at the global scope only. It does not contain debug
information about source lines, location expressions, or local variables.
For more information on CTF, see the documentation in the libdtrace-ctf
source tree, available here:
<https://raw.githubusercontent.com/oracle/libdtrace-ctf/master/doc/ctf-format>.
This patch expands struct elfinfo by adding the .ctf section, which
contains CTF debugging info, and modifies elf_symfile_read() to read it.
If both DWARF and CTF exist in a program, only DWARF will be read. CTF data
will be read only when there is no DWARF. The two-stage symbolic reading
and setting strategy, partial and full, was used.
File ctfread.c contains functions to transform CTF data into gdb's internal
symbol table structures by iterately reading entries from CTF sections
of "data objects", "function info", "variable info", and "data types"
when setting up either partial or full symbol table. If the ELF symbol table
is available, e.g. not stripped, the CTF reader will associate the found
type information with these symbol entries. Due to the proximity between DWARF
and CTF (CTF being a much simplified subset of DWARF), some DWARF implementation
was reused to support CTF.
Test cases ctf-constvars.exp, ctf-cvexpr.exp, ctf-ptype.exp, and ctf-whatis.exp
have been added to verify the correctness of this support.
This patch has missing features and limitations which we will add and
address in the future patches.
gdb/ChangeLog
+2019-10-07 Weimin Pan <weimin.pan@oracle.com>
+
+ * gdb/ctfread.c: New file.
+ * gdb/ctfread.h: New file.
+ * gdb/elfread.c: Include ctfread.h.
+ (struct elfinfo text_p): New member ctfsect.
+ (elf_locate_sections): Mark CTF section.
+ (elf_symfile_read): Call elfctf_build_psymtabs.
+ * gdb/Makefile.in (LIBCTF): Add.
+ (CLIBS): Use it.
+ (CDEPS): Likewise.
+ (DIST): Add ctfread.c.
+ * Makefile.def (dependencies): Add all-libctf to all-gdb
+ * Makefile.in: Add "all-gdb: maybe-all-libctf"
+
gdb/testsuite/ChangeLog
+2019-10-07 Weimin Pan <weimin.pan@oracle.com>
+
+ * gdb.base/ctf-whatis.exp: New file.
+ * gdb.base/ctf-whatis.c: New file.
+ * gdb.base/ctf-ptype.exp: New file.
+ * gdb.base/ctf-ptype.c: New file.
+ * gdb.base/ctf-constvars.exp: New file.
+ * gdb.base/ctf-constvars.c: New file.
+ * gdb.base/ctf-cvexpr.exp: New file.
+
With gdb.cp/local-static.exp and gcc 4.8, I see:
...
gdb compile failed, src/gdb/testsuite/gdb.cp/local-static.c: In function 'main':
src/gdb/testsuite/gdb.cp/local-static.c:148:3: error: 'for' loop initial \
declarations are only allowed in C99 mode
for (int i = 0; i < 1000; i++)
^
src/gdb/testsuite/gdb.cp/local-static.c:148:3: note: use option -std=c99 or \
-std=gnu99 to compile your code
UNTESTED: gdb.cp/local-static.exp: c: failed to prepare
...
Fix this by moving the declaration of int i out of the for loop.
gdb/testsuite/ChangeLog:
2019-10-04 Tom de Vries <tdevries@suse.de>
* gdb.cp/local-static.c (main): Move declaration of int i out of the
for loop.
1) GOT entries generated for any of the GOT TLS relocations don't need
dynamic relocations for locally defined symbols in PIEs. In the case
of a tls_index doubleword, the dtpmod entry is known to be 1, and the
dtprel entry is also known at link time and relative. Similarly,
dtprel and tprel words are known at link time and relative. (GOT
entries for other than TLS symbols are not relative and thus need
dynamic relocations in PIEs.)
2) Local dynamic TLS code is really only meant for accesses local to
the current binary. There was a cheapskate test for this before using
the common tlsld_got slot, but the test wasn't exactly correct and
might confuse anyone looking at the code. The proper test,
SYMBOL_REFERENCES_LOCAL isn't so expensive that it should be avoided.
3) The same cheap test for local syms when optimising TLS sequences
should be SYMBOL_REFERENCES_LOCAL too.
bfd/
* elf64-ppc.c (ppc64_elf_check_relocs): Move initialisation of vars.
(ppc64_elf_tls_optimize): Correct is_local condition.
(allocate_got): Don't reserve dynamic relocations for any of the
tls got relocs in PIEs when the symbol is local.
(allocate_dynrelocs): Correct validity test for local sym using
tlsld_got slot.
(ppc64_elf_size_dynamic_sections): Don't reserve dynamic relocations
for any of the tls got relocs in PIEs.
(ppc64_elf_layout_multitoc): Likewise.
(ppc64_elf_relocate_section): Correct validity test for local sym
using tlsld_got slot. Don't emit dynamic relocations for any of
the tls got relocs in PIEs when the symbol is local.
* elf32-ppc.c (ppc_elf_tls_optimize): Correct is_local condition.
(got_relocs_needed): Delete.
(allocate_dynrelocs): Correct validity test for local sym using
tlsld_got slot. Don't reserve dynamic relocations for any of the
tls got relocs in PIEs when the symbol is local.
(ppc_elf_size_dynamic_sections): Don't reserve dynamic relocations
for any of the tls got relocs in PIEs.
(ppc_elf_relocate_section): Correct validity test for local sym
using tlsld_got slot. Don't emit dynamic relocations for any of
the tls got relocs in PIEs when the symbol is local.
ld/
* testsuite/ld-powerpc/tlsso.d: Adjust to suit tlsld_got usage change.
* testsuite/ld-powerpc/tlsso.g: Likewise.
* testsuite/ld-powerpc/tlsso.r: Likewise.
* testsuite/ld-powerpc/tlsso32.d: Likewise.
* testsuite/ld-powerpc/tlsso32.g: Likewise.
* testsuite/ld-powerpc/tlsso32.r: Likewise.
Dynamic relocs are only needed in an executable for TLS symbols if
those are defined in an external module and even then TLS access
can be relaxed to use IE model instead of GD.
Several bfd_link_pic checks are turned into bfd_link_dll checks
to fix TLS handling in PIE, for the same fix some other targets
used !bfd_link_executable checks, but that includes relocatable
objects so dll seems safer (in most cases either should work, since
dynamic relocations are not applied in relocatable objects).
On arm* fixes
FAIL: Build pr22263-1
bfd/
PR ld/22263
PR ld/25056
* elf32-arm.c (elf32_arm_tls_transition): Use bfd_link_dll instead of
bfd_link_pic for TLS checks.
(elf32_arm_final_link_relocate): Likewise.
(allocate_dynrelocs_for_symbol): Likewise.
On 64-bit host the 32-bit addend was loaded without sign extension into
an unsigned long.
bfd/ChangeLog:
PR ld/25062
* elf32-arm.c (elf32_arm_final_link_relocate): Sign extend data.
ld/ChangeLog:
PR ld/25062
* testsuite/ld-arm/arm-elf.exp: Update.
* testsuite/ld-arm/tls-gdesc-neg.d: New test.
* testsuite/ld-arm/tls-gdesc-neg.s: New test.
PR rust/24976 points out a crash in gdb when a single-field union is
used in Rust.
The immediate problem was a NULL pointer dereference in
quirk_rust_enum. However, that code is also erroneously treating a
single-field union as if it were a univariant enum. Looking at the
output of an older Rust compiler, it turns out that univariant enums
are distinguished by having a single *anonymous* field. This patch
changes quirk_rust_enum to limit its fixup to this case.
Tested with a new-enough version of the Rust compiler to cause the
crash; plus by using an older executable that uses the old univariant
encoding.
gdb/ChangeLog
2019-10-03 Tom Tromey <tom@tromey.com>
PR rust/24976:
* dwarf2read.c (quirk_rust_enum): Handle single-element unions.
gdb/testsuite/ChangeLog
2019-10-03 Tom Tromey <tom@tromey.com>
PR rust/24976:
* gdb.rust/simple.rs (Union2): New type.
(main): Use Union2.
* gdb.rust/simple.exp: Add test.
This commit allows symbol matching within Fortran code without having
to specify all of the symbol's scope. For example, given this Fortran
code:
module aaa
contains
subroutine foo
print *, "hello."
end subroutine foo
end module aaa
subroutine foo
print *, "hello."
end subroutine foo
program test
call foo
contains
subroutine foo
print *, "hello."
end subroutine foo
subroutine bar
use aaa
call foo
end subroutine bar
end program test
The user can now do this:
(gdb) b foo
Breakpoint 1 at 0x4006c2: foo. (3 locations)
(gdb) info breakpoints
Num Type Disp Enb Address What
1 breakpoint keep y <MULTIPLE>
1.1 y 0x00000000004006c2 in aaa::foo at nest.f90:4
1.2 y 0x0000000000400730 in foo at nest.f90:9
1.3 y 0x00000000004007c3 in test::foo at nest.f90:16
The user asks for a breakpoint on 'foo' and is given a breakpoint on
all three possible 'foo' locations. The user is, of course, still
able to specify the scope in order to place a single breakpoint on
just one of the foo functions (or use 'break -qualified foo' to break
on just the global foo).
gdb/ChangeLog:
* f-lang.c (f_language_defn): Use cp_get_symbol_name_matcher and
cp_search_name_hash.
* NEWS: Add entry about nested function support.
gdb/testsuite/ChangeLog:
* gdb.fortran/nested-funcs-2.exp: Run tests with and without the
nested function prefix.
This patch is a rebase and update of the following three patches:
https://sourceware.org/ml/gdb-patches/2018-11/msg00298.htmlhttps://sourceware.org/ml/gdb-patches/2018-11/msg00302.htmlhttps://sourceware.org/ml/gdb-patches/2018-11/msg00301.html
I have merged these together into a single commit as the second patch,
adding scope support to nested subroutines, means that some of the
changes in the first patch are now no longer useful and would have to
be backed out. The third patch is tightly coupled to the changes in
the second of these patches and I think deserves to live together with
it.
There is an extra change in cp-namespace.c that is new, this resolves
an issue with symbol lookup when placing breakpoints from within
nested subroutines.
There is also an extra test added to this commit 'nested-funcs-2.exp'
that was written by Richard Bunt from ARM, this offers some additional
testing of breakpoints on nested functions.
After this commit it is possible to place breakpoints on nested
Fortran subroutines and functions by using a fully scoped name, for
example, given this simple Fortran program:
program greeting
call message
contains
subroutine message
print *, "Hello World"
end subroutine message
end program greeting
It is possible to place a breakpoint in 'message' with:
(gdb) break greeting::message
Breakpoint 1 at 0x4006c9: file basic.f90, line 5.
What doesn't work with this commit is placing a breakpoint like this:
(gdb) break message
Function "message" not defined.
Making this work will come in a later commit.
gdb/ChangeLog:
* cp-namespace.c (cp_search_static_and_baseclasses): Only search
for nested static variables when searchin VAR_DOMAIN.
* dwarf2read.c (add_partial_symbol): Add nested subroutines to the
global scope, update comment.
(add_partial_subprogram): Call add_partial_subprogram recursively
for nested subroutines when processinng Fortran.
(load_partial_dies): Process the child entities of a subprogram
when processing Fortran.
(partial_die_parent_scope): Handle building scope
for Fortran nested functions.
(process_die): Record that nested functions have a scope.
(new_symbol): Always record Fortran subprograms on the global
symbol list.
(determine_prefix): How to build the prefix for Fortran
subprograms.
gdb/testsuite/ChangeLog:
* gdb.fortran/nested-funcs.exp: Tests for placing breakpoints on
nested functions.
* gdb.fortran/nested-funcs.f90: Update expected results.
* gdb.fortran/nested-funcs-2.exp: New file.
* gdb.fortran/nested-funcs-2.f90: New file.
gdb/doc/ChangeLog:
* doc/gdb.texinfo (Fortran Operators): Describe scope operator.
This commit removes some, but not all, of the test name duplication
within the gdb.python tests. On my local machine this takes the
number of duplicate test names in this set of tests from 174 to 85.
It is possible that different setups might encounter more duplicate
tests.
gdb/testsuite/ChangeLog:
* gdb.python/py-parameter.exp: Make test names unique.
* gdb.python/py-template.exp: Likewise.
* gdb.python/py-value.exp: Likewise.
This commit removes some, but not all, of the test name duplication
within the gdb.base tests. On my local machine this takes the number
of duplicate test names in this set of tests from 454 to 145. It is
possible that different setups might encounter more duplicate tests.
gdb/testsuite/ChangeLog:
* gdb.base/break-interp.exp: Reduce test name duplication.
* gdb.base/call-sc.exp: Likewise.
* gdb.base/callfuncs.exp: Likewise.
* gdb.base/charset.exp: Likewise.
* gdb.base/dump.exp: Likewise.
* gdb.base/ena-dis-br.exp: Likewise.
* gdb.base/relational.exp: Likewise.
* gdb.base/step-over-syscall.exp: Likewise.
* gdb.base/structs.exp: Likewise.
Make test names unique in the gdb.linespec tests. On my local machine
this removed 43 duplicate test names. It is possible that different
setups might still encounter some duplicates.
gdb/testsuite/ChangeLog:
* gdb.linespec/explicit.exp: Make test names unique.
* gdb.linespec/ls-errs.exp: Likewise.
Make test names unique in the gdb.reverse tests. On my local machine
this removed 825 duplicate test names. It is possible that different
setups might still encounter some duplicates.
gdb/testsuite/ChangeLog:
* gdb.reverse/break-precsave.exp: Make test names unique.
* gdb.reverse/break-reverse.exp: Likewise.
* gdb.reverse/finish-precsave.exp: Likewise.
* gdb.reverse/finish-reverse.exp: Likewise.
* gdb.reverse/machinestate-precsave.exp: Likewise.
* gdb.reverse/machinestate.exp: Likewise.
* gdb.reverse/readv-reverse.exp: Likewise.
* gdb.reverse/recvmsg-reverse.exp: Likewise.
* gdb.reverse/sigall-precsave.exp: Likewise.
* gdb.reverse/sigall-reverse.exp: Likewise.
* gdb.reverse/step-indirect-call-thunk.exp: Likewise.
* gdb.reverse/watch-precsave.exp: Likewise.
* gdb.reverse/watch-reverse.exp: Likewise.
A little tabdamage predating the linker patch series has crept in.
New in v5.
libctf/
* ctf-open.c (ctf_bufopen_internal): Fix tabdamage.
* ctf-types.c (ctf_type_lname): Likewise.
For readelf particularly, this is more or less whistling in the dark:
there are hundreds of lines where spaces are used where tabs were used
on adjacent lines.
New in v5.
binutils/
* objdump.c (main): Fix tabdamage.
* readelf.c (CTF_DUMP): Likewise.
(options): Likewise.
(dump_section_as_ctf): Likewise.
Calling ctf_import (fp, NULL) to cancel out a pre-existing import leaked
the refcnt increment on the parent, so it could never be freed.
New in v4.
libctf/
* ctf-open.c (ctf_import): Do not leak a ctf_file_t ref on every
ctf_import after the first for a given file.
ctf_dump calls ctf_str_append extensively but never checks to see if it
returns NULL (on OOM). If it ever does, we truncate the string we are
appending to and leak it!
Instead, create a variant of ctf_str_append that returns the *original
string* on OOM, and use it in ctf-dump. It is far better to omit a tiny
piece of a dump on OOM than to omit a bigger piece, and it is also
better to do this in what is after all purely debugging code than it is
to uglify ctf-dump.c with huge numbers of checks for the out-of-memory
case. Slightly truncated debugging output is better than no debugging
output at all and an out-of-memory message.
New in v4.
libctf/
* ctf-impl.h (ctf_str_append_noerr): Declare.
* ctf-util.c (ctf_str_append_noerr): Define in terms of
ctf_str_append.
* ctf-dump.c (str_append): New, call it.
(ctf_dump_format_type): Use str_append, not ctf_str_append.
(ctf_dump_label): Likewise.
(ctf_dump_objts): Likewise.
(ctf_dump_funcs): Likewise.
(ctf_dump_var): Likewise.
(ctf_dump_member): Likewise.
(ctf_dump_type): Likewise.
(ctf_dump): Likewise.
GDB Administrator
Tom Tromey
Christian Biesinger
Alan Modra
Andreas Krebbel
Weimin Pan
Jozef Lawrynowicz
Andrew Burgess
Tom de Vries
Jan Beulich
Joel Brobecker
Szabolcs Nagy
Tom Tromey
Nick Alcock