For PLT expressions, we should subtract the PLT relocation size only for
jump instructions. Since PLT relocations are PC relative, we only allow
"symbol@PLT" in PLT expression.
gas/
PR gas/23997
* config/tc-i386.c (x86_cons): Check for invalid PLT expression.
(md_apply_fix): Subtract the PLT relocation size only for jump
instructions.
* testsuite/gas/i386/reloc32.s: Add test for invalid PLT
expression.
* testsuite/gas/i386/reloc64.s: Likewise.
* testsuite/gas/i386/ilp32/reloc64.s: Likewise.
* testsuite/gas/i386/reloc32.l: Updated.
* testsuite/gas/i386/reloc64.l: Likewise.
* testsuite/gas/i386/ilp32/reloc64.l: Likewise.
ld/
PR gas/23997
* testsuite/ld-i386/i386.exp: Run PR gas/23997 test.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/pr23997a.s: New file.
* testsuite/ld-x86-64/pr23997b.c: Likewise.
* testsuite/ld-x86-64/pr23997c.c: Likewise.
Linkers group input note sections with the same name into one output
note section with the same name. One output note section is placed in
one PT_NOTE segment. New linkers merge all input .note.gnu.property
sections into one output .note.gnu.property section with a single
NT_GNU_PROPERTY_TYPE_0 note in a single PT_NOTE segment. Since older
linkers treat input .note.gnu.property section as a generic note section
and just concatenate all input .note.gnu.property sections into one
output .note.gnu.property section without merging them, we may
see one or more NT_GNU_PROPERTY_TYPE_0 notes in PT_NOTE segment, which
are invalid.
GNU_PROPERTY_X86_UINT32_VALID was defined to address this issue such
that linker sets the bit for non-relocatable outputs. But it isn't
sufficient:
1. It doesn't cover generic properties.
2. When -mx86-used-note=yes is passed to x86 assembler, the
GNU_PROPERTY_X86_UINT32_VALID bit is set in GNU_PROPERTY_X86_ISA_1_USED
property in object file and older linkers generate invalid
NT_GNU_PROPERTY_TYPE_0 notes with the GNU_PROPERTY_X86_UINT32_VALID bit
set.
I am proposing the following changes:
1. Add PT_GNU_PROPERTY segment type:
# define PT_GNU_PROPERTY (PT_LOOS + 0x474e553)
which covers .note.gnu.property section.
2. Remove GNU_PROPERTY_X86_UINT32_VALID.
bfd/
PR ld/23900
* elf.c (get_program_header_size): Add a PT_GNU_PROPERTY
segment for NOTE_GNU_PROPERTY_SECTION_NAME.
(_bfd_elf_map_sections_to_segments): Create a PT_GNU_PROPERTY
segment for NOTE_GNU_PROPERTY_SECTION_NAME.
* elfxx-x86.c (_bfd_elf_link_setup_gnu_properties): Don't set
GNU_PROPERTY_X86_UINT32_VALID.
binutils/
PR ld/23900
* readelf.c (get_segment_type): Support PT_GNU_PROPERTY.
(decode_x86_isa): Don't check GNU_PROPERTY_X86_UINT32_VALID.
(decode_x86_feature_1): Likewise.
(decode_x86_feature_2): Likewise.
(print_gnu_property_note): Remove GNU_PROPERTY_X86_UINT32_VALID
check.
* testsuite/binutils-all/i386/empty.d: Updated.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/i386/pr21231b.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0x7fffffff.
* testsuite/binutils-all/x86-64/pr21231b.s: Likewise.
gas/
PR ld/23900
* config/tc-i386.c (x86_cleanup): Don't set
GNU_PROPERTY_X86_UINT32_VALID.
* testsuite/gas/i386/property-1.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0.
include/
PR ld/23900
* elf/common.h (PT_GNU_PROPERTY): New.
(GNU_PROPERTY_X86_UINT32_VALID): Removed.
ld/
PR ld/23900
* testsuite/ld-elf/elf.exp: Run PR ld/23900 test.
* testsuite/ld-elf/pr23900-1-32.rd: New file.
* testsuite/ld-elf/pr23900-1-64.rd: Likewise.
* testsuite/ld-elf/pr23900-1.d: Likewise.
* testsuite/ld-elf/pr23900-1.s: Likewise.
* testsuite/ld-elf/pr23900-2.s: Likewise.
* testsuite/ld-elf/pr23900-2a.d: Likewise.
* testsuite/ld-elf/pr23900-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.d: Adjusted.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/pr23372c.d: Expect <None>
for GNU_PROPERTY_X86_ISA_1_USED.
* testsuite/ld-x86-64/pr23372c-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372c.d: Likewise.
* testsuite/ld-x86-64/pr23372d-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372d.d: Likewise.
* testsuite/ld-x86-64/property-x86-5a.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0.
* testsuite/ld-x86-64/property-x86-5b.s: Likewise.
Mark the previous definition from IR object as undefined so that the
generic linker will override it.
bfd/
PR ld/23958
* elflink.c (_bfd_elf_add_default_symbol): Override the previous
definition from IR object.
ld/
PR ld/23958
* testsuite/ld-plugin/lto.exp: Run PR ld/23958 test.
* testsuite/ld-plugin/pr23958.c: New file.
* testsuite/ld-plugin/pr23958.t: Likewise.
For GNU_PROPERTY_X86_COMPAT_ISA_1_USED and GNU_PROPERTY_X86_UINT32_OR_AND
properties, a bit in the output pr_data field is set if it is set in any
relocatable input pr_data fields and this property is present in all
relocatable input files. A missing property implies that its bits have
unknown values. When all bits in the the output pr_data field are zero,
this property should not be removed from output to indicate it has zero
in all bits.
bfd/
PR ld/23372
* elfxx-x86.c (_bfd_x86_elf_merge_gnu_properties): Don't remove
empty properties for GNU_PROPERTY_X86_COMPAT_ISA_1_USED and
GNU_PROPERTY_X86_UINT32_OR_AND.
(_bfd_x86_elf_link_fixup_gnu_properties): Likewise.
ld/
PR ld/23372
* testsuite/ld-i386/pr23372a.d: Updated.
* testsuite/ld-i386/pr23372c.d: Likewise.
* testsuite/ld-x86-64/pr23372a-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372a.d: Likewise.
* testsuite/ld-x86-64/pr23372c-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372c.d: Likewise.
Delay setting its alignment until we know it is non-empty. Otherwise an
empty iplt section may change vma and lma of the following sections, which
triggers moving dot of the following section backwards, resulting in a
warning and section lma not being set properly. It later leads to a
"File truncated" error.
bfd/
PR ld/23930
* elfxx-x86.c (_bfd_x86_elf_size_dynamic_sections): Update
the iplt section alignment if it is non-empty.
(_bfd_x86_elf_link_setup_gnu_properties): Set plt.iplt_alignment
and delay setting the iplt section alignment.
* elfxx-x86.h (elf_x86_plt_layout): Add iplt_alignment.
ld/
PR ld/23930
* testsuite/ld-i386/i386.exp: Run pr23930.
* testsuite/ld-i386/pr23930.d: New file.
* testsuite/ld-x86-64/pr23930-32.t: Likewise.
* testsuite/ld-x86-64/pr23930-x32.d: Likewise.
* testsuite/ld-x86-64/pr23930.d: Likewise.
* testsuite/ld-x86-64/pr23930.t: Likewise.
* testsuite/ld-x86-64/pr23930a.s: Likewise.
* testsuite/ld-x86-64/pr23930b.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr23930 and pr23930-x32.
IFUNC resolvers must always be called via their global entry point.
They will be called from ld.so rather than from the local executable.
PR 23937
bfd/
* elf64-ppc.c (write_plt_relocs_for_local_syms): Don't add local
entry offset for ifuncs.
ld/
* testsuite/ld-powerpc/pr23937.d,
* testsuite/ld-powerpc/pr23937.s: New test.
* testsuite/ld-powerpc/powerpc.exp: Run it.
Accept R_MIPS_HI16, R_MIPS_HIGHER and R_MIPS_HIGHEST relocations and
their compressed counterparts in PIC code where the symbol referred is
absolute. Such an operation is meaningful, because an absolute symbol
effectively is a constant the calculation of the value of which has been
deferred to the static link time, and which is not going to change any
further at the dynamic load time. Therefore there is no need ever to
refuse the use of these relocations with such symbols, as the resulting
run-time value observed by the program will be correct even in PIC code.
This is not the case with R_MIPS_26 and its compressed counterparts,
because the run-time value calculated by the instructions these
relocations are used with depends on the address of the instruction
itself, and that can change according to the base address used by the
dynamic loader. Therefore these relocations have to continue being
rejected in PIC code even with absolute symbols.
This allows successful linking of code that relies on previous linker
behavior up to commit 861fb55ab5 ("Defer allocation of R_MIPS_REL32
GOT slots"), <https://sourceware.org/ml/binutils/2008-08/msg00096.html>,
which introduced the problematic check missing this special exception
for absolute symbols.
bfd/
* elfxx-mips.c (_bfd_mips_elf_check_relocs) <R_MIPS16_HI16>
<R_MIPS_HI16, R_MIPS_HIGHER, R_MIPS_HIGHEST, R_MICROMIPS_HI16>
<R_MICROMIPS_HIGHER, R_MICROMIPS_HIGHEST>: Also accept an
absolute symbol in PIC code.
ld/
* testsuite/ld-mips-elf/pic-reloc-0.d: New test.
* testsuite/ld-mips-elf/pic-reloc-1.d: New test.
* testsuite/ld-mips-elf/pic-reloc-2.d: New test.
* testsuite/ld-mips-elf/pic-reloc-3.d: New test.
* testsuite/ld-mips-elf/pic-reloc-4.d: New test.
* testsuite/ld-mips-elf/pic-reloc-absolute-hi.ld: New test
linker script.
* testsuite/ld-mips-elf/pic-reloc-absolute-lo.ld: New test
linker script.
* testsuite/ld-mips-elf/pic-reloc-ordinary.ld: New test linker
script.
* testsuite/ld-mips-elf/pic-reloc-j.s: New test source.
* testsuite/ld-mips-elf/pic-reloc-lui.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
The fix for PR ld/22263 causes TLS relocations using ADRP to be relaxed
into MOVZ, however this causes issues for the erratum code.
The erratum code scans the input sections looking for ADRP instructions
and notes their location in the stream.
It then later tries to find them again in order to generate the linker
stubs. Due to the relaxation it instead finds a MOVZ and hard aborts.
Since this relaxation is a valid one, and in which case the erratum no
longer applies, it shouldn't abort but instead just continue.
This changes the TLS relaxation code such that when it finds an ADRP and
it relaxes it, it removes the erratum entry from the work list by changing
the stub type into none so the stub is ignored.
The entry is not actually removed as removal is a more expensive operation
and we have already allocated the memory anyway.
The clearing is done for IE->LE and GD->LE relaxations, and a testcase is
added for the IE case. The GD case I believe to be impossible to get together
with the erratum sequence due to the required BL which would break the sequence.
However to cover all basis I have added the guard there as well.
build on native hardware and regtested on
aarch64-none-elf, aarch64-none-elf (32 bit host),
aarch64-none-linux-gnu, aarch64-none-linux-gnu (32 bit host)
Cross-compiled and regtested on
aarch64-none-linux-gnu, aarch64_be-none-linux-gnu
Testcase in PR23940 tested and works as expected now and benchmarks ran on A53
showing no regressions and no issues.
bfd/ChangeLog:
PR ld/23904
* elfnn-aarch64.c (_bfd_aarch64_adrp_p): Use existing constants.
(_bfd_aarch64_erratum_843419_branch_to_stub): Use _bfd_aarch64_adrp_p.
(struct erratum_835769_branch_to_stub_clear_data): New.
(_bfd_aarch64_erratum_843419_clear_stub): New.
(clear_erratum_843419_entry): New.
(elfNN_aarch64_tls_relax): Use it.
(elfNN_aarch64_relocate_section): Pass input_section.
(aarch64_map_one_stub): Handle branch type none as valid.
ld/ChangeLog:
PR ld/23904
* testsuite/ld-aarch64/aarch64-elf.exp: Add erratum843419_tls_ie.
* testsuite/ld-aarch64/erratum843419_tls_ie.d: New test.
* testsuite/ld-aarch64/erratum843419_tls_ie.s: New test.
Glibc commit:
commit a15529fda8d132621328c3fe32997a3d9c55aef4
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Mon May 14 09:23:55 2018 -0700
i386: Replace PREINIT_FUNCTION@PLT with *%eax in call
Since we have loaded address of PREINIT_FUNCTION into %eax, we can
avoid extra branch to PLT slot.
changed __gmon_start__ relocations in crt1.o from
00000015 0000092b R_386_GOT32X 00000000 __gmon_start__
0000001e 00000904 R_386_PLT32 00000000 __gmon_start__
to
00000015 00000a2b R_386_GOT32X 00000000 __gmon_start__
As the result, .plt.sec section may be generated instead of .plt.got
section, depending on __gmon_start__ relocations.
* testsuite/ld-i386/plt-main-ibt.dd: Accept both .plt.got and
.plt.sec sections.
Add --enable-x86-feature and --disable-x86-feature options to elfedit
to set and clear the IBT and SHSTK bits in program property in ELF
executables and shared objects.
binutils/
* doc/binutils.texi: Document --enable-x86-feature and
--disable-x86-feature options for elfedit.
* elfedit.c: Include "config.h" and <sys/mman.h>.
(enable_x86_features): New.
(disable_x86_features): Likewise.
(update_gnu_property): Likewise.
(elf_x86_feature): Likewise.
(process_file): Call update_gnu_property on ET_EXEC or ET_DYN
file.
(command_line_switch): Add OPTION_ENABLE_X86_FEATURE and
OPTION_DISABLE_X86_FEATURE.
(options): Add--enable-x86-feature and --disable-x86-feature.
(usage): Likewise.
(main): Handle OPTION_ENABLE_X86_FEATURE and
OPTION_DISABLE_X86_FEATURE.
ld/
* testsuite/config/default.exp (ELFEDIT): New.
* testsuite/ld-elf/linux-x86.exp (elfedit_test): New proc.
Run elfedit tests.
* testsuite/ld-elf/x86-feature-1a.rd: New file.
* testsuite/ld-elf/x86-feature-1b.rd: Likewise.
* testsuite/ld-elf/x86-feature-1c.rd: Likewise.
* testsuite/ld-elf/x86-feature-1d.rd: Likewise.
* testsuite/ld-elf/x86-feature-1e.rd: Likewise.
run_dump_test proposes an ld action but when trying to make use of it in
a gas test it gave me some Tcl error. It turns out that it references
the check_shared_lib_support procedure and ld_elf_shared_opt variable
both only available in ld-lib.exp. I've thus moved the procedure in
binutils-common.exp and defined the variable needed in the various
default.exp of testsuite that seem to be using run_dump_test.
Since check_shared_lib_support itself references the ld variable not
defined in binutils-common I've defined it from LD in run_dump_test and
fixed LD and LDFLAGS to be defined as expected by run_dump_test in the
various default.exp of testsuite using run_dump_test.
2018-11-01 Thomas Preud'homme <thomas.preudhomme@linaro.org>
binutils/
* testsuite/config/default.exp: Define LD, LDFLAGS and
ld_elf_shared_opt.
* testsuite/lib/binutils-common.exp (check_shared_lib_support): Moved
from ld-lib.exp.
(run_dump_test): Set ld to $LD.
gas/
* testsuite/config/default.exp: Define LD, LDFLAGS and
ld_elf_shared_opt.
ld/
* testsuite/lib/ld-lib.exp (check_shared_lib_support): Moved to
binutils-common.exp.
When assigning symbol version, we should hide debug symbols defined in
discarded sections from IR objects so that they can be removed later.
bfd/
PR ld/23818
* elflink.c (_bfd_elf_link_assign_sym_version): Hide symbols
defined in discarded input sections.
ld/
PR ld/23818
* testsuite/ld-plugin/lto.exp: Run PR ld/23818 test.
* testsuite/ld-plugin/pr23818.d: New file.
* testsuite/ld-plugin/pr23818.t: Likewise.
* testsuite/ld-plugin/pr23818a.c: Likewise.
* testsuite/ld-plugin/pr23818b.c: Likewise.
Fixes a couple of ERROR results due to .set difference on alpha.
* testsuite/ld-elf/shared.exp: Don't build pr19073 test on alpha.
* testsuite/ld-elf/pr18720b.c: Don't use .set on alpha.
With
commit 64029e9368
Author: Alan Modra <amodra@gmail.com>
Date: Fri Oct 5 11:40:54 2018 +0930
Separate header PT_LOAD for -z separate-code
there is no need to add a GNU_PROPERTY_X86_ISA_1_USED note to force
program header in in non-code PT_LOAD segment when -z separate-code
is used.
bfd/
PR ld/23428
* elfxx-x86.c (_bfd_x86_elf_link_setup_gnu_properties): Don't
add GNU_PROPERTY_X86_FEATURE_2_NEEDED to force program header
in non-code PT_LOAD segment.
ld/
PR ld/23428
* testsuite/ld-i386/property-x86-4a.d: Updated.
* testsuite/ld-x86-64/property-x86-4a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-4a.d: Likewise.
Properly group orphan note sections. When placing orphan note section
as the first note section, place it after the section before all note
sections.
PR ld/23658
* ldlang.c (lang_insert_orphan): Properly group and place orphan
note sections. Properly handle orphan note section before all
note sections.
* testsuite/ld-elf/pr23658-1.d: Renamed to ...
* testsuite/ld-elf/pr23658-1a.d: This. Updated.
* testsuite/ld-elf/pr23658-1b.d: New test.
* testsuite/ld-elf/pr23658-1c.d: Likewise.
This patch, along with previous patches in the series, supports
putting the ELF file header and program headers in a PT_LOAD without
sections.
Logic governing whether headers a loaded has changed a little: The
primary reason to include headers is now the presence of
SIZEOF_HEADERS in a linker script. However, to support scripts that
may have reserved space for headers by hand, we continue to add
headers whenever the first section address is past the end of headers
modulo page size.
include/
* bfdlink.h (struct bfd_link_info): Add load_phdrs field.
bfd/
* elf-nacl.c (nacl_modify_segment_map): Cope with header PT_LOAD
lacking sections.
* elf.c (_bfd_elf_map_sections_to_segments): Assume file and
program headers are required when info->load_phdrs. Reorganize
code handling program headers. Generate a mapping without
sections just for file and program headers when -z separate-code
would indicate they should be on a different page to the first
section.
ld/
* ldexp.c (fold_name <SIZEOF_HEADERS>): Set link_info.load_phdrs.
* testsuite/ld-elf/loadaddr1.d: Pass -z noseparate-code.
* testsuite/ld-elf/loadaddr2.d: Likewise.
* testsuite/ld-i386/vxworks2.sd: Adjust expected output.
* testsuite/ld-powerpc/vxworks2.sd: Likewise.
* testsuite/ld-elf/overlay.d: Remove spu xfail.
* testsuite/ld-spu/ovl.lnk: Don't use SIZEOF_HEADERS.
* testsuite/ld-tic6x/dsbt-be.ld: Likewise.
* testsuite/ld-tic6x/dsbt-inrange.ld: Likewise.
* testsuite/ld-tic6x/dsbt-overflow.ld: Likewise.
* testsuite/ld-tic6x/dsbt.ld: Likewise.
Some time ago the pr19593 test was xfailed for alpha. This turned out
to be the wrong course of action since the test exposed a bug in
orphan section placement. On alpha, orphan sections were being
inserted before ". = SIZEOF_HEADERS" due to the test having two
assignments, and on alpha, an output section statement from
-Ttext-segment being passed to ld.
* ldlang.c (insert_os_after): Clear ignore_first on assignment to
dot, not any assignment. Clear ignore_first on output section
statement contents too.
* testsuite/ld-elf/pr19539.d: Remove alpha xfail.
Some targets don't set a default interpreter, resulting in an empty
.interp section unless --dynamic-linker is passed to ld. A PT_INTERP
without a path is rather useless.
The testsuite change fixes a failure on microblaze-linux.
bfd/
* elf.c (get_program_header_size): Don't count PT_INTERP if
.interp is empty.
(_bfd_elf_map_sections_to_segments): Don't create PT_INTERP if
.interp is empty.
ld/
* testsuite/ld-elf/pr22423.d: Pass --dynamic-linker to ld.
This patch adds the new instruction and relocation as per proposal:
https://openrisc.io/proposals/ladrp
This is to be added to the spec in an upcoming revision. The new instruction
l.adrp loads the page offset of the current instruction offset by
a 21-bit immediate shifted left 13-bits. This is meant to be used with
a 13-bit lower bit page offset. This allows us to free up the got
register r16.
l.adrp r3, foo
l.ori r4, r3, po(foo)
l.lbz r5, po(foo)(r3)
l.sb po(foo)(r3), r6
The relocations we add are:
- BFD_RELOC_OR1K_PLTA26 For PLT jump relocation with PLT entry
asm: plta() implemented using l.ardp, meaning
no need for r16 (the GOT reg)
- BFD_RELOC_OR1K_GOT_PG21 Upper 21-bit Page offset got address
asm: got()
- BFD_RELOC_OR1K_TLS_GD_PG21 Upper 21-bit Page offset with TLS General
asm: tlsgd() Dynamic calculation
- BFD_RELOC_OR1K_TLS_LDM_PG21 Upper 21-bit Page offset with TLS local
asm: tlsldm() dynamic calculation
- BFD_RELOC_OR1K_TLS_IE_PG21 Upper 21-bit Page offset with TLS Initial
asm: gottp() Executable calculation
- BFD_RELOC_OR1K_PCREL_PG21 Default relocation for disp21 (l.adrp
instructions)
- BFD_RELOC_OR1K_LO13 low 13-bit page offset relocation
asm: po() i.e. mem loads, addi etc
- BFD_RELOC_OR1K_SLO13 low 13-bit page offset relocation
asm: po() i.e. mem stores, with split immediate
- BFD_RELOC_OR1K_GOT_LO13, low 13-bit page offset with GOT calcs
asm: gotpo()
- BFD_RELOC_OR1K_TLS_GD_LO13 Lower 13-bit offset with TLS GD calcs
asm: tlsgdpo()
- BFD_RELOC_OR1K_TLS_LDM_LO13 Lower 13-bit offset with TLS LD calcs
asm: tlsldmpo()
- BFD_RELOC_OR1K_TLS_IE_LO13 Lower 13-bit offset with TLS IE calcs
asm: gottppo()
bfd/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* bfd-in2.h: Regenerated.
* elf32-or1k.c: (or1k_elf_howto_table): Fix formatting for
R_OR1K_PLT26, Add R_OR1K_PCREL_PG21, R_OR1K_GOT_PG21,
R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21,
R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13,
R_OR1K_TLS_IE_LO13, R_OR1K_SLO13, R_OR1K_PLTA26.
(or1k_reloc_map): Add BFD_RELOC_OR1K_PCREL_PG21,
BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_TLS_GD_PG21,
BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_IE_PG21,
BFD_RELOC_OR1K_LO13, BFD_RELOC_OR1K_GOT_LO13,
BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_GD_LO13,
BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_LO13,
BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_PLTA26.
(elf_or1k_link_hash_table): Add field saw_plta.
(or1k_final_link_relocate): Add value calculations for new relocations.
(or1k_elf_relocate_section): Add section relocations for new
relocations.
(or1k_write_plt_entry): New function.
(or1k_elf_finish_dynamic_sections): Add support for PLTA relocations
using new l.adrp instruction. Cleanup PLT relocation code generation.
* libbfd.h: Regenerated.
* reloc.c: Add BFD_RELOC_OR1K_PCREL_PG21, BFD_RELOC_OR1K_LO13,
BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_GOT_LO13,
BFD_RELOC_OR1K_PLTA26, BFD_RELOC_OR1K_TLS_GD_PG21,
BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21,
BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21,
BFD_RELOC_OR1K_TLS_IE_LO13.
cpu/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* or1k.opc (parse_disp26): Add support for plta() relocations.
(parse_disp21): New function.
(or1k_rclass): New enum.
(or1k_rtype): New enum.
(or1k_imm16_relocs): Define new PO and SPO relocation mappings.
(parse_reloc): Add new po(), gotpo() and gottppo() for LO13 relocations.
(parse_imm16): Add support for the new 21bit and 13bit relocations.
* or1korbis.cpu (f-disp26): Don't assume SI.
(f-disp21): New pc-relative 21-bit 13 shifted to right.
(insn-opcode): Add ADRP.
(l-adrp): New instruction.
gas/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* config/tc-or1k.c (or1k_apply_fix): Add BFD_RELOC_OR1K_TLS_GD_PG21,
BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21,
BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21,
BFD_RELOC_OR1K_TLS_IE_LO13.
* testsuite/gas/or1k/allinsn.s: Add test for l.adrp.
* testsuite/gas/or1k/allinsn.d: Add test results for new
instructions.
* testsuite/gas/or1k/reloc-1.s: Add tests to generate
R_OR1K_PLTA26, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21,
R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13,
R_OR1K_TLD_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_LO13, R_OR1K_SLO13
relocations.
* testsuite/gas/or1k/reloc-1.d: Add relocation results for
tests.
* testsuite/gas/or1k/reloc-2.s: Add negative tests for store to
gotpo().
* testsuite/gas/or1k/reloc-2.l: Add expected error test results.
ld/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* testsuite/ld-or1k/or1k.exp: Add test cases for plt generation.
* testsuite/ld-or1k/plt1.dd: New file.
* testsuite/ld-or1k/plt1.s: New file.
* testsuite/ld-or1k/plt1.x.dd: New file.
* testsuite/ld-or1k/plta1.dd: New file.
* testsuite/ld-or1k/plta1.s: New file.
* testsuite/ld-or1k/pltlib.s: New file.
include/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* elf/or1k.h (elf_or1k_reloc_type): Add R_OR1K_PCREL_PG21,
R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21,
R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13,
R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13, R_OR1K_TLS_IE_LO13,
R_OR1K_SLO13, R_OR1K_PLTA26.
opcodes/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* or1k-asm.c: Regenerated.
* or1k-desc.c: Regenerated.
* or1k-desc.h: Regenerated.
* or1k-dis.c: Regenerated.
* or1k-ibld.c: Regenerated.
* or1k-opc.c: Regenerated.
* or1k-opc.h: Regenerated.
* or1k-opinst.c: Regenerated.
This patch adds the following target relocations:
- BFD_RELOC_HI16_S High 16-bit relocation, for used with signed
asm: ha() lower.
- BFD_RELOC_HI16_S_GOTOFF High 16-bit GOT offset relocation for local
asm: gotoffha() symbols, for use with signed lower.
- BFD_RELOC_OR1K_TLS_IE_AHI16 High 16-bit TLS relocation with initial
asm: gottpoffha() executable calculation, for use with signed
lower.
- BFD_RELOC_OR1K_TLS_LE_AHI16 High 16-bit TLS relocation for local executable
asm: tpoffha() variables, for use with signed lower.
- BFD_RELOC_OR1K_SLO16 Split lower 16-bit relocation, used with
asm: lo() OpenRISC store instructions.
- BFD_RELOC_OR1K_GOTOFF_SLO16 Split lower 16-bit GOT offset relocation for
asm: gotofflo() local symbols, used with OpenRISC store
instructions.
- BFD_RELOC_OR1K_TLS_LE_SLO16 Split lower 16-bit relocation for TLS local
asm: tpofflo() executable variables, used with OpenRISC store
instructions.
bfd/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
Stafford Horne <shorne@gmail.com>
* bfd-in2.h: Regenerated.
* elf32-or1k.c (N_ONES): New macro.
(or1k_elf_howto_table): Fix R_OR1K_PLT26 to complain on overflow.
Add definitions for R_OR1K_TLS_TPOFF, R_OR1K_TLS_DTPOFF,
R_OR1K_TLS_DTPMOD, R_OR1K_AHI16, R_OR1K_GOTOFF_AHI16,
R_OR1K_TLS_IE_AHI16, R_OR1K_TLS_LE_AHI16, R_OR1K_SLO16,
R_OR1K_GOTOFF_SLO16, R_OR1K_TLS_LE_SLO16.
(or1k_reloc_map): Add entries for BFD_RELOC_HI16_S,
BFD_RELOC_LO16_GOTOFF, BFD_RELOC_HI16_GOTOFF, BFD_RELOC_HI16_S_GOTOFF,
BFD_RELOC_OR1K_TLS_IE_AHI16, BFD_RELOC_OR1K_TLS_LE_AHI16,
BFD_RELOC_OR1K_SLO16, BFD_RELOC_OR1K_GOTOFF_SLO16,
BFD_RELOC_OR1K_TLS_LE_SLO16.
(or1k_reloc_type_lookup): Change search loop to start ad index 0 and
also check results before returning.
(or1k_reloc_name_lookup): Simplify loop to use R_OR1K_max as index
limit.
(or1k_final_link_relocate): New function.
(or1k_elf_relocate_section): Add support for new AHI and SLO
relocations. Use or1k_final_link_relocate instead of generic
_bfd_final_link_relocate.
(or1k_elf_check_relocs): Add support for new AHI and SLO relocations.
* reloc.c: Add new enums for BFD_RELOC_OR1K_SLO16,
BFD_RELOC_OR1K_GOTOFF_SLO16, BFD_RELOC_OR1K_TLS_IE_AHI16,
BFD_RELOC_OR1K_TLS_IE_AHI16, BFD_RELOC_OR1K_TLS_LE_AHI16,
BFD_RELOC_OR1K_TLS_LE_SLO16. Remove unused BFD_RELOC_OR1K_GOTOFF_HI16
and BFD_RELOC_OR1K_GOTOFF_LO16.
* libbfd.h: Regenerated.
cpu/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* or1k.opc: Add RTYPE_ enum.
(INVALID_STORE_RELOC): New string.
(or1k_imm16_relocs): New array array.
(parse_reloc): New static function that just does the parsing.
(parse_imm16): New static function for generic parsing.
(parse_simm16): Change to just call parse_imm16.
(parse_simm16_split): New function.
(parse_uimm16): Change to call parse_imm16.
(parse_uimm16_split): New function.
* or1korbis.cpu (simm16-split): Change to use new simm16_split.
(uimm16-split): Change to use new uimm16_split.
gas/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* testsuite/gas/or1k/allinsn.d (l_ha): Add result for ha() relocation.
* testsuite/gas/or1k/allinsn.s (l_ha): Add test for ha() relocations.
* testsuite/gas/or1k/allinsn.exp: Renamed to or1k.exp.
* testsuite/gas/or1k/or1k.exp: Add reloc-2 list test.
* testsuite/gas/or1k/reloc-1.d: New file.
* testsuite/gas/or1k/reloc-1.s: New file.
* testsuite/gas/or1k/reloc-2.l: New file.
* testsuite/gas/or1k/reloc-2.s: New file.
include/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* elf/or1k.h (elf_or1k_reloc_type): Add R_OR1K_AHI16,
R_OR1K_GOTOFF_AHI16, R_OR1K_TLS_IE_AHI16, R_OR1K_TLS_LE_AHI16,
R_OR1K_SLO16, R_OR1K_GOTOFF_SLO16, R_OR1K_TLS_LE_SLO16.
ld/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* testsuite/ld-or1k/offsets1.d: New file.
* testsuite/ld-or1k/offsets1.s: New file.
* testsuite/ld-or1k/or1k.exp: New file.
opcodes/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* or1k-asm.c: Regenerate.
Since ft32-* and xgate-* use generic linker, SHT_NOTE sections aren't
grouped nor sorted.
PR ld/23658
* testsuite/ld-elf/pr23658-1.d: Also xfail ft32-* and xgate-*.
Add testcases to verify that all SHT_NOTE sections with the same section
alignment are placed in a single PT_NOTE segment.
PR ld/23658
* testsuite/ld-elf/pr23658-1.d: New file.
* testsuite/ld-elf/pr23658-1a.s: Likewise.
* testsuite/ld-elf/pr23658-1b.s: Likewise.
* testsuite/ld-elf/pr23658-1c.s: Likewise.
* testsuite/ld-elf/pr23658-1d.s: Likewise.
* testsuite/ld-elf/pr23658-2.rd: Likewise.
* testsuite/ld-elf/pr23658-3.d: Likewise.
* testsuite/ld-elf/pr23658-3.s: Likewise.
* testsuite/ld-elf/pr23658-3.t: Likewise.
* testsuite/ld-elf/shared.exp: Run PR ld/23658 tests.
This gets rid of the couple of linker failures for visium-elf:
FAIL: ld-elf/pr14156b
FAIL: ld-elf/pr22677
by tweaking the respective testcases. The first tweak is the same as the
one made to the sibling testcase ld-elf/pr14156a.d about one year ago and
the second tweak adds the usual main/start/_start/__start symbols.
ld/
* testsuite/ld-elf/pr14156b.d: Adjust for extra symbols.
* testsuite/ld-elf/pr22677.s: Define main/start/_start/__start.
bfd/
* elfnn-riscv.c (riscv_resolve_pcrel_lo_relocs): Add check for reloc
overflow with addend. Use reloc_dangerous instead of reloc_overflow.
Add strings for the two errors handled here.
(riscv_elf_relocate_section) In case R_RISCV_PCREL_LO12_I, rewrite
comment. Only give error with addend when used with section symbol.
In case bfd_reloc_dangerous, update error string.
ld/
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Run pcrel-lo-addend-2.
* testsuite/ld-riscv/elf/ld-riscv-elf/pcrel-lo-addend-2.d: New.
* testsuite/ld-riscv/elf/ld-riscv-elf/pcrel-lo-addend-2.s: New.
* testsuite/ld-riscv/elf/ld-riscv-elf/pcrel-lo-addend.d: Update name
and error string.
We have not only removed all unsupported and obsolete code, but also supported lost of new features,
including better link-time relaxations and TLS implementations. Besides, the files generated by the
newly assembler and linker usually get higher performance and more optimized code size.
ld * emultempl/nds32elf.em (hyper_relax): New variable.
(nds32_elf_create_output_section_statements):
the parameters of bfd_elf32_nds32_set_target_option
(PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Add new option --mhyper-relax.
* emultempl/nds32elf.em (nds32_elf_after_open): Updated.
* emultempl/nds32elf.em (tls_desc_trampoline): New variable.
* (nds32_elf_create_output_section_statements): Updated.
* (nds32_elf_after_parse): Disable relaxations when PIC is enable.
* (PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Add new option --m[no-]tlsdesc-trampoline.
include * elf/nds32.h: Remove the unused target features.
* dis-asm.h (disassemble_init_nds32): Declared.
* elf/nds32.h (E_NDS32_NULL): Removed.
(E_NDS32_HAS_DSP_INST, E_NDS32_HAS_ZOL): New.
* opcode/nds32.h: Ident.
(N32_SUB6, INSN_LW): New macros.
(enum n32_opcodes): Updated.
* elf/nds32.h: Doc fixes.
* elf/nds32.h: Add R_NDS32_LSI.
* elf/nds32.h: Add new relocations for TLS.
gas * config/tc-nds32.c: Remove the unused target features.
(nds32_relax_relocs, md_pseudo_table, nds32_elf_record_fixup_exp,
nds32_set_elf_flags_by_insn, nds32_insert_relax_entry,
nds32_apply_fix): Likewise.
(nds32_no_ex9_begin): Removed.
* config/tc-nds32.c (add_mapping_symbol_for_align,
make_mapping_symbol, add_mapping_symbol): New functions.
* config/tc-nds32.h (enum mstate): New.
(nds32_segment_info_type): Likewise.
* configure.ac (--enable-dsp-ext, --enable-zol-ext): New options.
* config.in: Regenerated.
* configure: Regenerated.
* config/tc-nds32.c (nds32_dx_regs):
Set the value according to the configuration.
(nds32_perf_ext, nds32_perf_ext2, nds32_string_ext, nds32_audio_ext):
Likewise.
(nds32_dsp_ext): New variable. Set the value according to the
configuration.
(nds32_zol_ext): Likewise.
(asm_desc, nds32_pseudo_opcode_table): Make them static.
(nds32_set_elf_flags_by_insn): Updated.
(nds32_check_insn_available): Updated.
(nds32_str_tolower): New function.
* config/tc-nds32.c (relax_table): Updated.
(md_begin): Updated.
(md_assemble): Use XNEW macro to allocate space for `insn.info',
and then remember to free it.
(md_section_align): Cast (-1) to ValueT.
(nds32_get_align): Cast (~0U) to addressT.
(nds32_relax_branch_instructions): Updated.
(md_convert_frag): Add new local variable `final_r_type'.
(invalid_prev_frag): Add new bfd_boolean parameter `relax'.
All callers changed.
* config/tc-nds32.c (struct nds32_relocs_pattern): Add `insn' field.
(struct nds32_hint_map): Add `option_list' field.
(struct suffix_name, suffix_table): Remove the unused `pic' field.
(do_pseudo_b, do_pseudo_bal): Remove the suffix checking.
(do_pseudo_la_internal, do_pseudo_pushpopm): Indent.
(relax_hint_bias, relax_hint_id_current): New static variables.
(reset_bias, relax_hint_begin): New variables.
(nds_itoa): New function.
(CLEAN_REG, GET_OPCODE): New macros.
(struct relax_hint_id): New.
(nds32_relax_hint): For .relax_hint directive, we can use `begin'
and `end' to mark the relax pattern without giving exactly id number.
(nds32_elf_append_relax_relocs): Handle the case that the .relax_hint
directives are attached to pseudo instruction.
(nds32_elf_save_pseudo_pattern): Change the second parameter from
instruction's opcode to byte code.
(nds32_elf_build_relax_relation): Add new bfd_boolean parameter
`pseudo_hint'.
(nds32_lookup_pseudo_opcode): Fix the overflow issue.
(enum nds32_insn_type): Add N32_RELAX_ALU1 and N32_RELAX_16BIT.
(nds32_elf_record_fixup_exp, relax_ls_table, hint_map,
nds32_find_reloc_table, nds32_match_hint_insn, nds32_parse_name):
Updated.
* config/tc-nds32.h (MAX_RELAX_NUM): Extend it to 6.
(enum nds32_relax_hint_type): Merge NDS32_RELAX_HINT_LA and
NDS32_RELAX_HINT_LS into NDS32_RELAX_HINT_LALS. Add
NDS32_RELAX_HINT_LA_PLT, NDS32_RELAX_HINT_LA_GOT and
NDS32_RELAX_HINT_LA_GOTOFF.
* config/tc-nds32.h (relax_ls_table): Add floating load/store
to gp relax pattern.
(hint_map, nds32_find_reloc_table): Likewise.
* configure.ac: Define NDS32_LINUX_TOOLCHAIN.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-nds32.h (enum nds32_ramp): Updated.
(enum nds32_relax_hint_type): Likewise.
* config/tc-nds32.c: Include "errno.h" and "limits.h".
(relax_ls_table): Add TLS relax patterns.
(nds32_elf_append_relax_relocs): Attach BFD_RELOC_NDS32_GROUP on
each instructions of TLS patterns.
(nds32_elf_record_fixup_exp): Updated.
(nds32_apply_fix): Likewise.
(suffix_table): Add TLSDESC suffix.
binutils* testsuite/binutils-all/objcopy.exp: Set the unsupported reloc number
from 215 to 255 for NDS32.
bfd * elf32-nds32.c (nds32_elf_relax_loadstore):
Remove the unused target features.
(bfd_elf32_nds32_set_target_option): Remove the unused parameters.
(nds32_elf_relax_piclo12, nds32_elf_relax_letlslo12,
nds32_elf_relax_letlsadd, nds32_elf_relax_letlsls,
nds32_elf_relax_pltgot_suff, nds32_elf_relax_got_suff
nds32_elf_relax_gotoff_suff, calculate_plt_memory_address,
calculate_plt_offset, calculate_got_memory_address,
nds32_elf_check_dup_relocs): Removed.
All callers changed.
* elf32-nds32.h: Remove the unused macros and defines.
(elf_nds32_link_hash_table): Remove the unused variable.
(bfd_elf32_nds32_set_target_option): Update prototype.
(nds32_elf_ex9_init): Removed.
* elf32-nds32.c (nds32_convert_32_to_16): Updated.
* elf32-nds32.c (HOWTO2, HOWTO3): Define new HOWTO macros
to initialize array nds32_elf_howto_table in any order
without lots of EMPTY_HOWTO.
(nds32_reloc_map): Updated.
* reloc.c: Add BFD_RELOC_NDS32_LSI.
* bfd-in2.h: Regenerated.
* bfd/libbfd.h: Regenerated.
* elf32-nds32.c (nds32_elf_relax_howto_table): Add R_NDS32_LSI.
(nds32_reloc_map): Likewise.
(nds32_elf_relax_flsi): New function.
(nds32_elf_relax_section): Support floating load/store relaxation.
* elf32-nds32.c (NDS32_GUARD_SEC_P, elf32_nds32_local_gp_offset):
New macro.
(struct elf_nds32_link_hash_entry): New `offset_to_gp' field.
(struct elf_nds32_obj_tdata): New `offset_to_gp' and `hdr_size' fields.
(elf32_nds32_allocate_local_sym_info, nds32_elf_relax_guard,
nds32_elf_is_target_special_symbol, nds32_elf_maybe_function_sym):
New functions.
(nds32_info_to_howto_rel): Add BFD_ASSERT.
(bfd_elf32_bfd_reloc_type_table_lookup, nds32_elf_link_hash_newfunc,
nds32_elf_link_hash_table_create, nds32_elf_relocate_section,
nds32_elf_relax_loadstore, nds32_elf_relax_lo12, nds32_relax_adjust_label,
bfd_elf32_nds32_set_target_option, nds32_fag_mark_relax): Updated.
(nds32_elf_final_sda_base): Improve it to find the better gp value.
(insert_nds32_elf_blank): Must consider `len' when inserting blanks.
* elf32-nds32.h (bfd_elf32_nds32_set_target_option): Update prototype.
(struct elf_nds32_link_hash_table): Add new variable `hyper_relax'.
* elf32-nds32.c (elf32_nds32_allocate_dynrelocs): New function.
(create_got_section): Likewise.
(allocate_dynrelocs, nds32_elf_size_dynamic_sections,
nds32_elf_relocate_section, nds32_elf_finish_dynamic_symbol): Updated.
(nds32_elf_check_relocs): Fix the issue that the shared library may
has TEXTREL entry in the dynamic section.
(nds32_elf_create_dynamic_sections): Enable to call readonly_dynrelocs
since the TEXTREL issue is fixed in the nds32_elf_check_relocs.
(nds32_elf_finish_dynamic_sections): Update and add DT_RELASZ
dynamic entry.
(calculate_offset): Remove the unused parameter `pic_ext_target' and
related codes.
All callers changed.
(elf_backend_dtrel_excludes_plt): Disable it temporarily since it
will cause some errors for our test cases.
* elf32-nds32.c (nds32_elf_merge_private_bfd_data): Allow to link the
generic object.
* reloc.c: Add TLS relocations.
* libbfd.h: Regenerated.
* bfd-in2.h: Regenerated.
* elf32-nds32.h (struct section_id_list_t): New.
(elf32_nds32_lookup_section_id, elf32_nds32_check_relax_group,
elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model):
New prototypes.
(elf32_nds32_compute_jump_table_size, elf32_nds32_local_tlsdesc_gotent):
New macro.
(nds32_insertion_sort, bfd_elf32_nds32_set_target_option,
elf_nds32_link_hash_table): Updated.
* elf32-nds32.c (enum elf_nds32_tls_type): New.
(struct elf32_nds32_relax_group_t, struct relax_group_list_t): New.
(elf32_nds32_add_dynreloc, patch_tls_desc_to_ie, get_tls_type,
fls, ones32, list_insert, list_insert_sibling, dump_chain,
elf32_nds32_check_relax_group, elf32_nds32_lookup_section_id,
elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model): New functions.
(elf_nds32_obj_tdata): Add new fields.
(elf32_nds32_relax_group_ptr, nds32_elf_local_tlsdesc_gotent): New macros.
(nds32_elf_howto_table): Add TLS relocations.
(nds32_reloc_map): Likewise.
(nds32_elf_copy_indirect_symbol, nds32_elf_size_dynamic_sections,
nds32_elf_finish_dynamic_symbol, elf32_nds32_allocate_local_sym_info,
nds32_elf_relocate_section, bfd_elf32_nds32_set_target_option,
nds32_elf_check_relocs, allocate_dynrelocs): Updated.
(nds32_elf_relax_section): Call nds32_elf_unify_tls_model.
(dtpoff_base): Rename it to `gottpof' and then update it.
opcodes * nds32-asm.c (operand_fields): Remove the unused fields.
(nds32_opcodes): Remove the unused instructions.
* nds32-dis.c (nds32_ex9_info): Removed.
(nds32_parse_opcode): Updated.
(print_insn_nds32): Likewise.
* nds32-asm.c (config.h, stdlib.h, string.h): New includes.
(LEX_SET_FIELD, LEX_GET_FIELD): Update defines.
(nds32_asm_init, build_operand_hash_table, build_keyword_hash_table,
build_opcode_hash_table): New functions.
(nds32_keyword_table, nds32_keyword_count_table, nds32_field_table,
nds32_opcode_table): New.
(hw_ktabs): Declare it to a pointer rather than an array.
(build_hash_table): Removed.
* nds32-asm.h (enum): Add SYN_INPUT, SYN_OUTPUT, SYN_LOPT,
SYN_ROPT and upadte HW_GPR and HW_INT.
* nds32-dis.c (keywords): Remove const.
(match_field): New function.
(nds32_parse_opcode): Updated.
* disassemble.c (disassemble_init_for_target):
Add disassemble_init_nds32.
* nds32-dis.c (eum map_type): New.
(nds32_private_data): Likewise.
(get_mapping_symbol_type, is_mapping_symbol, nds32_symbol_is_valid,
nds32_add_opcode_hash_table, disassemble_init_nds32): New functions.
(print_insn_nds32): Updated.
* nds32-asm.c (parse_aext_reg): Add new parameter.
(parse_re, parse_re2, parse_aext_reg): Only reduced registers
are allowed to use.
All callers changed.
* nds32-asm.c (keyword_usr, keyword_sr): Updated.
(operand_fields): Add new fields.
(nds32_opcodes): Add new instructions.
(keyword_aridxi_mx): New keyword.
* nds32-asm.h (enum): Add NASM_ATTR_DSP_ISAEXT, HW_AEXT_ARIDXI_MX
and NASM_ATTR_ZOL.
(ALU2_1, ALU2_2, ALU2_3): New macros.
* nds32-dis.c (nds32_filter_unknown_insn): Updated.
binutils* testsuite/binutils-all/compress.exp: Rename second "objcopy
zlib-gnu compress debug sections 3" test to "objcopy zlib-gabi
compress debug sections 3" and use gabi object files instead
of gnu object files.
* testsuite/binutils-all/objcopy.exp: Add suffix to the names
of the "ELF group" tests.
* testsuite/binutils-all/readelf.exp (proc readelf_find_size):
Add an iteration parameter and include it in the name of the
test. Update callers to include an iteration count.
gas * testuite/gas/elf/group0a.d: Add extra details to the test
name.
* testuite/gas/elf/group0b.d: Likewise.
* testuite/gas/elf/group1a.d: Likewise.
* testuite/gas/elf/group1b.d: Likewise.
* testuite/gas/elf/group0b.d: Likewise.
* testuite/gas/elf/section9.d: Likewise.
* testuite/gas/i386/ilp32/lns/lns-common-1.d: Likewise.
* testuite/gas/i386/ilp32/lns/lns-duplicate-1.d: Likewise.
ld * testuite/ld/ld-elf/audit.exp: Differentiate the names of the
two "Run with shared with --audit" tests.
* testuite/ld/ld-elf/compress.exp: Differentiate the zlib
compressed debug output test names.
* testuite/ld/ld-i386/tlspie1.d: Add extra details to the test
name.
* testuite/ld/ld-i386/tlspie2.d: Likewise.
* testuite/ld/ld-size/size.exp: Add missing escapes to the end
of lines in the size-3e test.
* testuite/ld/ld-unique/unique.exp: Differentiate the names of
the two "Checking unique PIC object" tests.
* testuite/ld/ld-x86-64/tlspie1.d: Add extra details to the test
name.
When dereferencing a GOT slot with lgrl or lg we rewrite this using
larl to get rid of the extra memory access. However, we cannot do
this for:
- symbols marked for absolute addressing
- symbols at odd addresses (larl can handle only even addresses)
Fixed with the attached patch.
bfd/ChangeLog:
2018-09-17 Andreas Krebbel <krebbel@linux.ibm.com>
* elf64-s390.c (elf_s390_relocate_section): Prevent rewriting of
GOT accesses with larl for ABS or misaligned symbols.
ld/ChangeLog:
2018-09-17 Andreas Krebbel <krebbel@linux.ibm.com>
* testsuite/ld-s390/gotreloc-1.s: Add tests for ABS and misaligned
symbol. Move variables into data section. Make bar 8 bytes wide.
* testsuite/ld-s390/gotreloc-1.ver: Make misaligned_sym resolve locally.
* testsuite/ld-s390/gotreloc_31-1.dd: Adjust patterns.
* testsuite/ld-s390/gotreloc_64-norelro-1.dd: Likewise.
* testsuite/ld-s390/gotreloc_64-relro-1.dd: Likewise.
ld/testsuite/ld-s12z/
* reloc-ext18-1.d: New file.
* reloc-ext18-1.d: New file.
* reloc-ext18-2.d: New file.
* reloc-ext18.d: New file.
* reloc-ext18.s: New file.
* reloc-ext24.d: New file.
* reloc-ext24.s: New file.
* reloc-ext32.d: New file.
* reloc-ext32.s: New file.
* reloc-opr.d: New file.
* reloc-opr.d: New file.
* reloc-opr.s: New file.
* reloc-pc-rel-7-15.d: New file.
* reloc-pc-rel-7-15.s: New file.
This merges the three versions of run_dump_test. Improved warning
handling versus the old gas version shows up a number of tests that
need their disassembly updating:
arm-linuxeabi +FAIL: ARM v1 instructions
arm-linuxeabi +FAIL: Accepted v8-a with ARMv8.1 AdvSIMD.
arm-linuxeabi +FAIL: bl local instructions for v4t.
arm-linuxeabi +FAIL: UDF
and some that now fail due to detecting assembly warnings:
h8300-elf +FAIL: binutils-all/strip-13
h8300-elf +FAIL: binutils-all/strip-14
h8300-elf +FAIL: binutils-all/strip-15
I've generally kept the union of all run_dump_test features, except
that the ld target aliases "cfi" and "shared" have disappeared, as has
the binutils substitution of $srcdir as $scrdir/$subdir.
binutils/
* testsuite/binutils-all/add-symbol.d: Add "section_subst: no".
* testsuite/binutils-all/elfedit.exp: Don't set tempfile or copyfile.
* testsuite/binutils-all/symbols-1.d,
* testsuite/binutils-all/symbols-2.d,
* testsuite/binutils-all/symbols-3.d,
* testsuite/binutils-all/symbols-4.d: Quote '*' and '!'.
* testsuite/binutils-all/add-empty-section.d,
* testsuite/binutils-all/add-section.d,
* testsuite/binutils-all/elfedit.exp,
* testsuite/binutils-all/note-1.d,
* testsuite/binutils-all/pr23633.d: Add $subdir after $srcdir.
* testsuite/config/default.exp (AS, ASFLAGS): Define.
* testsuite/config/hppa.sed: Handle all common symbols.
* testsuite/lib/binutils-common.exp (run_dump_test): New proc,
merged from three other versions.
(slurp_options, file_contents, set_file_contents): Likewise.
(big_or_little_endian, get_standard_section_names): Likewise.
* testsuite/lib/utils-lib.exp (run_dump_test): Delete.
(slurp_options, proc file_contents): Delete.
(get_standard_section_names): Delete.
gas/
* testsuite/config/default.exp: Make tmpdir.
* testsuite/lib/gas-defs.exp (run_dump_test): Delete.
(get_standard_section_names, slurp_options): Delete.
ld/
* testsuite/ld-d10v/reloc-007.d,
* testsuite/ld-d10v/reloc-008.d,
* testsuite/ld-d10v/reloc-015.d,
* testsuite/ld-d10v/reloc-016.d: Remove "error:".
* testsuite/ld-elf/eh-frame-hdr.d,
* testsuite/ld-elf/eh5.d,
* testsuite/ld-gc/personality.d: Replace "cfi" and "shared" in
target list with appropriate proc.
* testsuite/ld-elf/frame.exp: Use check_shared_lib_support rather
than "istarget shared".
* testsuite/lib/ld-lib.exp (proc big_or_little_endian): Delete.
(run_dump_test, slurp_options, file_contents): Delete.
(set_file_contents, istarget): Delete.
We have three copies of run_dump_test in the testsuite. This is a first
step towards consolidating them.
A few tests use objcopy to convert to verilog or srec output, then
check that output is as expected. Those tests can just as easily use
objdump, keeping the set of dump programs (addr2line, nm, objdump,
readelf, size) separate from utilities under test. That in turn makes
auto-detecting the dump program possible in more places.
binutils/
* testsuite/binutils-all/group-7a.d,
* testsuite/binutils-all/group-7b.d,
* testsuite/binutils-all/group-7c.d,
* testsuite/binutils-all/symbols-1.d,
* testsuite/binutils-all/symbols-2.d,
* testsuite/binutils-all/symbols-3.d,
* testsuite/binutils-all/symbols-4.d: Remove DUMPPROG.
gas/
* testsuite/gas/mri/char.d: Don't objcopy to srec, objdump instead.
* testsuite/gas/mri/float.d: Likewise.
* testsuite/lib/gas-defs.exp (run_dump_test): Remove support
for objcopy as a dump tool.
ld/
* testsuite/ld-elf/interleave-0.d,
* testsuite/ld-elf/interleave-4.d: Don't objcopy to srec,
objdump instead.
* testsuite/ld-gc/all-debug-sections.d,
* testsuite/ld-scripts/provide-4.d,
* testsuite/ld-scripts/provide-5.d,
* testsuite/ld-scripts/provide-6.d,
* testsuite/ld-scripts/provide-7.d,
* testsuite/ld-scripts/provide-8.d,
* testsuite/ld-scripts/segment-start.d: Remove PROG, specify
nm instead.
* testsuite/lib/ld-lib.exp (run_dump_test): Remove support
for objcopy as a dump tool.
Define a new procedure, `run_mips_undefweak_test', and use it to iterate
over several scenarios involving undefined weak symbols resolving to
zero, verifying expected regular MIPS, MIPS16 and microMIPS code, GOT
and dynamic symbol table generation, as well as the setting of the
EI_ABIVERSION field in the ELF file header. In particular ensure that
symbol versioning works and that `__gnu_absolute_zero' gets assigned a
version (any will do) even if it has not been listed for exportation in
a linker version script.
ld/
PR ld/21375
* testsuite/ld-mips-elf/pr21375-abi.hd: New test.
* testsuite/ld-mips-elf/pr21375-noabi.hd: New test.
* testsuite/ld-mips-elf/pr21375.dd: New test.
* testsuite/ld-mips-elf/pr21375h.dd: New test.
* testsuite/ld-mips-elf/pr21375p.dd: New test.
* testsuite/ld-mips-elf/pr21375ph.dd: New test.
* testsuite/ld-mips-elf/pr21375s.dd: New test.
* testsuite/ld-mips-elf/pr21375s-n32.dd: New test.
* testsuite/ld-mips-elf/pr21375s-n64.dd: New test.
* testsuite/ld-mips-elf/pr21375sh.dd: New test.
* testsuite/ld-mips-elf/pr21375sh-n32.dd: New test.
* testsuite/ld-mips-elf/pr21375sh-n64.dd: New test.
* testsuite/ld-mips-elf/pr21375shg.dd: New test.
* testsuite/ld-mips-elf/pr21375sx.dd: New test.
* testsuite/ld-mips-elf/pr21375sxh.dd: New test.
* testsuite/ld-mips-elf/pr21375sm16.dd: New test.
* testsuite/ld-mips-elf/pr21375sm16h.dd: New test.
* testsuite/ld-mips-elf/pr21375su.dd: New test.
* testsuite/ld-mips-elf/pr21375su-n32.dd: New test.
* testsuite/ld-mips-elf/pr21375su-n64.dd: New test.
* testsuite/ld-mips-elf/pr21375suh.dd: New test.
* testsuite/ld-mips-elf/pr21375suh-n32.dd: New test.
* testsuite/ld-mips-elf/pr21375suh-n64.dd: New test.
* testsuite/ld-mips-elf/pr21375sux.dd: New test.
* testsuite/ld-mips-elf/pr21375suxh.dd: New test.
* testsuite/ld-mips-elf/pr21375.gd: New test.
* testsuite/ld-mips-elf/pr21375h.gd: New test.
* testsuite/ld-mips-elf/pr21375p.gd: New test.
* testsuite/ld-mips-elf/pr21375ph.gd: New test.
* testsuite/ld-mips-elf/pr21375s.gd: New test.
* testsuite/ld-mips-elf/pr21375s-n32.gd: New test.
* testsuite/ld-mips-elf/pr21375s-n64.gd: New test.
* testsuite/ld-mips-elf/pr21375sh.gd: New test.
* testsuite/ld-mips-elf/pr21375sh-n32.gd: New test.
* testsuite/ld-mips-elf/pr21375sh-n64.gd: New test.
* testsuite/ld-mips-elf/pr21375shg.gd: New test.
* testsuite/ld-mips-elf/pr21375shl.gd: New test.
* testsuite/ld-mips-elf/pr21375shv.gd: New test.
* testsuite/ld-mips-elf/pr21375sx.gd: New test.
* testsuite/ld-mips-elf/pr21375sxh.gd: New test.
* testsuite/ld-mips-elf/pr21375.sd: New test.
* testsuite/ld-mips-elf/pr21375-irix.sd: New test.
* testsuite/ld-mips-elf/pr21375h.sd: New test.
* testsuite/ld-mips-elf/pr21375h-irix.sd: New test.
* testsuite/ld-mips-elf/pr21375p.sd: New test.
* testsuite/ld-mips-elf/pr21375p-irix.sd: New test.
* testsuite/ld-mips-elf/pr21375ph.sd: New test.
* testsuite/ld-mips-elf/pr21375ph-irix.sd: New test.
* testsuite/ld-mips-elf/pr21375s.sd: New test.
* testsuite/ld-mips-elf/pr21375s-irix.sd: New test.
* testsuite/ld-mips-elf/pr21375s-n32.sd: New test.
* testsuite/ld-mips-elf/pr21375s-n32-irix.sd: New test.
* testsuite/ld-mips-elf/pr21375s-n64.sd: New test.
* testsuite/ld-mips-elf/pr21375s-n64-irix.sd: New test.
* testsuite/ld-mips-elf/pr21375sh.sd: New test.
* testsuite/ld-mips-elf/pr21375sh-irix.sd: New test.
* testsuite/ld-mips-elf/pr21375sh-n32.sd: New test.
* testsuite/ld-mips-elf/pr21375sh-n32-irix.sd: New test.
* testsuite/ld-mips-elf/pr21375sh-n64.sd: New test.
* testsuite/ld-mips-elf/pr21375sh-n64-irix.sd: New test.
* testsuite/ld-mips-elf/pr21375shg.sd: New test.
* testsuite/ld-mips-elf/pr21375shg-irix.sd: New test.
* testsuite/ld-mips-elf/pr21375shl.sd: New test.
* testsuite/ld-mips-elf/pr21375shl-irix.sd: New test.
* testsuite/ld-mips-elf/pr21375shv.sd: New test.
* testsuite/ld-mips-elf/pr21375shv-irix.sd: New test.
* testsuite/ld-mips-elf/pr21375sx.sd: New test.
* testsuite/ld-mips-elf/pr21375sx-irix.sd: New test.
* testsuite/ld-mips-elf/pr21375sxh.sd: New test.
* testsuite/ld-mips-elf/pr21375sxh-irix.sd: New test.
* testsuite/ld-mips-elf/pr21375.ld: New test linker script.
* testsuite/ld-mips-elf/pr21375-xgot.ld: New test linker script.
* testsuite/ld-mips-elf/pr21375.ver: New test version script.
* testsuite/ld-mips-elf/pr21375v.ver: New test version script.
* testsuite/ld-mips-elf/pr21375.s: New test source.
* testsuite/ld-mips-elf/pr21375-mips16.s: New test source.
* testsuite/ld-mips-elf/pr21375-n32.s: New test source.
* testsuite/ld-mips-elf/pr21375-n64.s: New test source.
* testsuite/ld-mips-elf/pr21375-xgot.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp (run_mips_undefweak_test):
New procedure; run the new tests.
We have an issue in the MIPS backend, with the handling of undefined
hidden and internal weak symbols. References to such symbols are
supposed to resolve to 0 according to the ELF gABI[1]:
"Unresolved weak symbols have a zero value."
and the 64-bit MIPS psABI[2]:
"If a symbol with one of these [hidden or internal] attributes has no
definition within the executable/DSO being linked, then it must be
resolved to allocated space if common, resolved to zero if weak, or an
error reported otherwise."
however if a GOT relocation is used, then a local GOT entry is created
and used to satisfy the reference. Such an entry is then (in DSO and
PIE binaries) subject to the usual load-time relocation, which means a
non-zero value will be returned if the base address is non-zero. This
will defeat the usual run-time sequence like:
void a (void) __attribute__ ((visibility ("hidden"), weak));
void
x (void)
{
if (a)
a ();
}
This can be reproduced with this simple code:
$ cat libtest.c
extern int a __attribute__ ((visibility ("hidden"), weak));
int *
x (void)
{
return &a;
}
$ cat test.c
int *x (void);
int
main (void)
{
printf ("a: %p\n", x ());
return 0;
}
$ gcc -shared -fPIC -o libtest.so libtest.c
$ gcc -o test test.c -Wl,-rpath,$(pwd) libtest.so
$ ./test
a: 0x77184000
$
The usual approach targets take is making all the steps required to
assign a GOT entry for the symbol referred, and then leave its contents
at zero with no dynamic relocation attached, therefore ensuring that the
value does not change at load time. However this is not going to work
with the implicitly relocated GOT the MIPS psABI specifies[3]:
"The dynamic linker relocates the global offset table by first adding
the difference between the base where the shared object is loaded and
the value of the dynamic tag DT_MIPS_BASE_ADDRESS to all local global
offset table entries."
and we cannot therefore use the local GOT part.
And we cannot offhand use the global part either, as the symbol would
then have to be exported and possibly wrongly preempt symbols in other
modules involved in the dynamic load, because as per the ELF gABI[1] we
are not allowed to enter a hidden or internal symbol into the dynamic
symbol table (and then use its associated GOT entry):
"A hidden symbol contained in a relocatable object must be either
removed or converted to STB_LOCAL binding by the link-editor when the
relocatable object is included in an executable file or shared object."
and:
"An internal symbol contained in a relocatable object must be either
removed or converted to STB_LOCAL binding by the link-editor when the
relocatable object is included in an executable file or shared object."
So we have to choose something else.
Our choice is further limited by the need for the reference associated
with the GOT relocation to stay within the signed 16-bit limit from the
GOT pointer base register, while being compliant with the ELF gABI and
the MIPS psABI. However as Alan Modra has observed[4] one possibility
is to edit (relax) the code such that the GOT reference is removed
altogether.
Based on these observations then modify MIPS BFD linker backend code to:
1. Interpret code associated with GOT relocations and relax the usual LW
or LD instructions into a corresponding immediate load operation that
places the value of 0 in the intended register, while leaving the GOT
entry allocated and initialized as usually.
2. Leave any other instructions associated with GOT relocations in place
and instead redirect the reference to a global GOT entry associated
with a special `__gnu_absolute_zero' symbol created for this purpose,
whose value is 0, SHN_ABS section marks it absolute, binding is
global and export class protected, ensuring that the locally provided
value is always used at load time, and that the value is not
relocated by the dynamic loader.
3. Adjust any high-part GOT relocation used, typically associated with
a LUI instruction, accordingly, so that run-time consistency is
maintained, either by resolving to the original entry if the
instruction associated with the corresponding low-part GOT relocation
has been relaxed to an immediate load (in which case the value loaded
with LUI will be overwritten), or by also redirecting the reference
to `__gnu_absolute_zero' to complete the GOT access sequence if that
symbol has been used.
4. Add a target `elf_backend_hide_symbol' hook, for the three MIPS ABIs,
which prevents the `__gnu_absolute_zero' symbol from being forced
local, to ensure that the redirection works and the symbol remains
global/protected with existing linker scripts unchanged.
5. Observing the issue with handling SHN_ABS symbols in the GNU dynamic
loader, covered by glibc PR 19818, set the EI_ABIVERSION field in the
ELF file header produced to 4 (ABI_ABSOLUTE) if `__gnu_absolute_zero'
symbol has been produced and the target configured indicates the GNU
operating system, so that broken versions of the GNU dynamic loader
gracefully reject the file in loading rather than going astray. Keep
EI_ABIVERSION at the original value for other operating systems or if
no `__gnu_absolute_zero' symbol has been made.
The name of the special `__gnu_absolute_zero' has no meaning other than
how a human reader can interpret it, as it is ignored in dynamic loading
in the handling of the scenarios concerned. This is because the symbol
resolves locally, and it's only the symbol's attributes that matter so
that the associated GOT entry remains unchanged at load time.
Therefore the name is somewhat arbitrary, observing however the need to
use the name space reserved for the system so that it does not conflict
with a possible user symbol, and hence the leading underscore, and also
the `gnu' infix to denote a GNU feature. Other implementations wishing
to address the problem in a similar way may choose a different name and
have the solution still work, possibly with a mixture of modules used in
a dynamic having symbols of different names provided, which will however
not interact with each other due to the protected export class.
The symbol can be referred explicitly, however the name is an internal
implementation detail rather than a part of the ABI, and therefore no
specific semantics is guaranteed.
One limitation of this change is that if `__gnu_absolute_zero' has been
already defined, then we do not wipe the old definition and all kinds of
odd behavior can result. This is however like with other symbols we
internally define, such as `_GLOBAL_OFFSET_TABLE_' or `__rld_map', and
therefore left as a possible future enhancement.
As an optimization the relaxation of LW and LD instructions to a load of
immediate zero is always made, even SVR4 PIC code for code that will end
up in a regular (non-PIE) executable, because there is a cache advantage
with the avoidance of a load from the GOT, even if it is otherwise
guaranteed to remain zero. It does not reliably happen though, due to a
symbol exportation issue affecting executables, covered by PR ld/21805.
One existing test case needs to be updated, as it triggers relaxation
introduced with this change and consequently linker output does not
match expectations anymore. As we want to keep the original issue
covered with the test case modify it then to use the LWL instruction in
place of LW, and adjust the output expected accordingly.
References:
[1] "System V Application Binary Interface - DRAFT - 19 October 2010",
The SCO Group, Section "Symbol Table",
<http://www.sco.com/developers/gabi/2012-12-31/ch4.symtab.html>
[2] "64-bit ELF Object File Specification, Draft Version 2.5", MIPS
Technologies / Silicon Graphics Computer Systems, Order Number
007-4658-001, Section 2.5 "Symbol Table", p. 22,
<http://techpubs.sgi.com/library/manuals/4000/007-4658-001/pdf/007-4658-001.pdf>
[3] "SYSTEM V APPLICATION BINARY INTERFACE, MIPS RISC Processor
Supplement, 3rd Edition", Section "Global Offset Table", p. 5-10,
<http://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf>
[4] "Undo dynamic symbol state after regular object sym type mismatch",
<https://sourceware.org/ml/binutils/2017-07/msg00265.html>
bfd/
PR ld/21375
* elfxx-mips.h (_bfd_mips_elf_hide_symbol): New prototype.
(_bfd_mips_elf_linker_flags): Update prototype.
* elf32-mips.c (elf_backend_hide_symbol): New macro.
* elf64-mips.c (elf_backend_hide_symbol): Likewise.
* elfn32-mips.c (elf_backend_hide_symbol): Likewise.
* elfxx-mips.c (mips_elf_link_hash_table): Add
`use_absolute_zero' and `gnu_target' members.
(mips_elf_record_global_got_symbol): Call
`_bfd_mips_elf_hide_symbol' rather than
`_bfd_elf_link_hash_hide_symbol'.
(mips_use_local_got_p): Return FALSE if the symbol is absolute.
(mips_elf_obtain_contents): Reorder function.
(mips_elf_nullify_got_load): New function.
(mips_elf_calculate_relocation): Add `contents' parameter.
Nullify GOT loads or if it is not possible, then redirect GOT
relocations to the `__gnu_absolute_zero' symbol, for references
that are supposed to resolve to zero.
(mips_elf_define_absolute_zero): New function.
(_bfd_mips_elf_check_relocs): Prepare for arrangements made in
`mips_elf_calculate_relocation' for references made via the GOT
that are supposed to resolve to zero.
(_bfd_mips_elf_hide_symbol): New function.
(_bfd_mips_elf_linker_flags): Add the `gnu_target' parameter,
set the `gnu_target' member of the MIPS hash table.
(MIPS_LIBC_ABI_ABSOLUTE): New enumeration constant.
(_bfd_mips_post_process_headers): Use it.
ld/
PR ld/21375
* emultempl/mipself.em: Set `gnu_target' according to ${target}.
(mips_create_output_section_statements): Update call to
`_bfd_mips_elf_linker_flags'.
* testsuite/ld-mips-elf/pr21334.s: Use LWL rather than LW.
* testsuite/ld-mips-elf/pr21334.dd: Update accordingly.
Fix an issue with the SEGMENT_START builtin function where its result is
absolute when taken from the default supplied, and section-relative when
taken from a `-T' command-line override. This is against documentation,
inconsistent and unexpected, and with PIE executables gives an incorrect
result with the `__executable_start' symbol.
Make the result of SEGMENT_START always section-relative then.
ld/
* ldexp.c (fold_binary): Always make the result of SEGMENT_START
section-relative.
* testsuite/ld-scripts/segment-start.d: New test.
* testsuite/ld-scripts/segment-start.ld: New test linker script.
* testsuite/ld-scripts/segment-start.s: New test source.
* testsuite/ld-scripts/script.exp: Run the new test.
Yuri Chornoivan
Jim Wilson
Maamoun Tarsha
Alan Modra
H.J. Lu
Maciej W. Rozycki
Tamar Christina
Claudiu Zissulescu
Thomas Preud'homme
Stafford Horne
Richard Henderson
Eric Botcazou
Nick Clifton
Andreas Krebbel
John Darrington
Maciej W. Rozycki