Since BYTE_PUT is defined as
#define BYTE_PUT(field, val) byte_put (field, val, sizeof (field))
use byte_put, instead of BYTE_PUT, to put 4-byte bitmask at ptr with
"byte_put (ptr, bitmask, 4)", instead of "BYTE_PUT (ptr, bitmask)", to
work with "unsigned char *ptr".
* elfedit.c (update_gnu_property): Replace BYTE_PUT with byte_put.
* objcopy.c (struct merged_note_section): New structure. Used to
chain together details of mergeable note sections.
(is_merged_note_section): Rename to is_megreable_note_section and
return true for note sections that use GNU_BUILD_ATTRS_SECTION_NAME
as a prefix.
(num_bytes): Delete
(objcoopy_internal_note): Add padded_namesz field.
(DEBUG_MERGE): New macro. Set to non-zero to enable debugging of
the note merging code.
(gap_exists): Rename to overlaps_or_adjoins and return TRUE for
overlapping notes or adjoining notes.
(contained_by, is_deleted_note, is_version_note)
(compare_gnu_build_notes, sort_gnu_build_notes): New functions.
(merge_gnu_build_notes): Rework. Sort notes into a mergeable
order first. Merge them. Then sort them into an ascending
address order before writing them out.
(copy_object): Handle more than one mergeable note section.
* testsuite/binutils-all/note-2-32.d: Update for new merging
behaviour.
* testsuite/binutils-all/note-2-32.s: Likewise.
* testsuite/binutils-all/note-2-64.d: Likewise.
* testsuite/binutils-all/note-2-64.s: Likewise.
* testsuite/binutils-all/note-3-32.d: Likewise.
* testsuite/binutils-all/note-3-32.s: Likewise.
* testsuite/binutils-all/note-3-64.d: Likewise.
* testsuite/binutils-all/note-3-64.s: Likewise.
* testsuite/binutils-all/note-4-32.d: Likewise.
* testsuite/binutils-all/note-4-32.s: Likewise.
* testsuite/binutils-all/note-4-64.d: Likewise.
* testsuite/binutils-all/note-4-64.s: Likewise.
* testsuite/binutils-all/note-6-32.s: New test source file.
* testsuite/binutils-all/note-6-64.s: New test source file.
* testsuite/binutils-all/note-6-32.d: New test driver file.
* testsuite/binutils-all/note-6-64.d: New test driver file.
* testsuite/binutils-all/objcopy.exp: Run the new test.
When PT_PHDR isn't covered by a PT_LOAD header, p_vaddr in PT_PHDR
isn't valid but the value might just pass a vaddr test. So test
p_offset as well.
* readelf.c (process_program_headers): Check PT_PHDR p_offset
as well as p_vaddr. Use p_filesz, not p_memsz, in vaddr test.
This patch extends "ar P" to allow creation of normal (as distinct
from thin) archives with full path names.
PR 452
PR 25104
bfd/
* archive.c (normalize): Return file unchanged when
BFD_ARCHIVE_FULL_PATH.
(_bfd_construct_extended_name_table): Pass abfd, the output
bfd, to normalize.
(_bfd_archive_bsd44_construct_extended_name_table): Likewise.
* bfd.c (struct bfd): Make flags a full flagword.
(BFD_ARCHIVE_FULL_PATH): Define.
* bfd-in2.h: Regenerate.
binutils/
* ar.c (write_archive): Set BFD_ARCHIVE_FULL_PATH.
* doc/binutils.texi (extract from archive): Mention
restrictions when extracting from archives with full paths.
(ar P): Update to current P support.
(ar -X32_64): Fix spelling.
binutils* README-how-to-make-a-release: Add a note to reset the
development flag back to true after making a point release.
ld * NEWS: Delete superflous "Changes in 2.33" comment.
's' is both a command and a modifier. If given as a command then we
aren't lacking an operation. I think the same goes when mri mode is
selected: any following command line used to be ignored.
PR 25079
* ar.c (decode_options): Don't try for command options if
write_armap or mri_mode is selected.
This functionality will generate a new GNU object attribute for the "data region"
has been added. This object attribute is used
mark whether the compiler has generated code assuming that data could be in the
upper or lower memory regions.
Code which assumes data is always in the lower memory region is incompatible
with code which uses the full memory range for data.
The patch also adds a new assembler directive ".mspabi_attribute" to handle the
existing MSPABI object attributes. GCC will now emit both .gnu_attribute and
.mspabi_attribute directives to indicate what options the source file was
compiled with.
The assembler will now check the values set in these directives against the
options that the it has been invoked with. If there is a discrepancy, the
assembler will exit with an error.
bfd * elf32-msp430.c (elf32_msp430_merge_mspabi_attributes): Rename to..
(elf32_msp430_merge_msp430_attributes): Add support for merging the GNU
object attribute for data region.
binutils* readelf.c (display_msp430_gnu_attribute): New.
(process_arch_specific): Use msp430 specific handler for GNU
attributes.
gas * config/tc-msp430.c (md_parse_option): Set lower_data_region_only to
FALSE if the data region is set to "upper", "either" or "none".
(msp430_object_attribute): New.
(md_pseudo_table): Handle .mspabi_attribute and .gnu_attribute.
(msp430_md_end): Replace hard-coded attribute values with enums.
Handle data region object attribute.
* doc/as.texi: Document MSP430 Data Region object attribute.
* doc/c-msp430.texi: Document the .mspabi_attribute directive.
* testsuite/gas/msp430/attr-430-small-bad.d: New test.
* testsuite/gas/msp430/attr-430-small-bad.l: New test.
* testsuite/gas/msp430/attr-430-small-good.d: New test.
* testsuite/gas/msp430/attr-430-small.s: New test.
* testsuite/gas/msp430/attr-430x-large-any-bad.d: New test.
* testsuite/gas/msp430/attr-430x-large-any-bad.l: New test.
* testsuite/gas/msp430/attr-430x-large-any-good.d: New test.
* testsuite/gas/msp430/attr-430x-large-any.s: New test.
* testsuite/gas/msp430/attr-430x-large-lower-bad.d: New test.
* testsuite/gas/msp430/attr-430x-large-lower-bad.l: New test.
* testsuite/gas/msp430/attr-430x-large-lower-good.d: New test.
* testsuite/gas/msp430/attr-430x-large-lower.s: New test.
* testsuite/gas/msp430/msp430.exp: Run new tests.
include * elf/msp430.h: Add enums for MSPABI and GNU object attribute tag names
and values.
ld * testsuite/ld-msp430-elf/attr-gnu-main.s: New test.
* testsuite/ld-msp430-elf/attr-gnu-obj.s: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-lower-upper.d: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-lower.d: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-upper.d: New test.
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new tests.
For readelf particularly, this is more or less whistling in the dark:
there are hundreds of lines where spaces are used where tabs were used
on adjacent lines.
New in v5.
binutils/
* objdump.c (main): Fix tabdamage.
* readelf.c (CTF_DUMP): Likewise.
(options): Likewise.
(dump_section_as_ctf): Likewise.
The linker emits CTF into a single section named .ctf, which is a CTF
archive where the default member (itself named ".ctf", or simply NULL)
is the parent of all other members. Teach objdump to look for this by
default, rather than only trying to do it if a specific CTF parent
section was specified. (If no parent name is specified, we get the .ctf
member from the same section as everything else, which matches what the
linker generates.)
binutils/
* objdump.c (dump_ctf): Use the default CTF archive member as the
parent even when no parent section is specified.
(dump_ctf_archive_member): Only import from the parent
if this is not the default ".ctf" member.
This lets other programs read and write CTF-format data.
Two versioned shared libraries are created: libctf.so and
libctf-nobfd.so. They contain identical content except that
libctf-nobfd.so contains no references to libbfd and does not implement
ctf_open, ctf_fdopen, ctf_bfdopen or ctf_bfdopen_ctfsect, so it can be
used by programs that cannot use BFD, like readelf.
The soname major version is presently .0 until the linker API
stabilizes, when it will flip to .1 and hopefully never change again.
New in v3.
v4: libtoolize and turn into a pair of shared libraries. Drop
--enable-install-ctf: now controlled by --enable-shared and
--enable-install-libbfd, like everything else.
v5: Add ../bfd to ACLOCAL_AMFLAGS and AC_CONFIG_MACRO_DIR. Fix tabdamage.
* Makefile.def (host_modules): libctf is no longer no_install.
* Makefile.in: Regenerated.
libctf/
* configure.ac (AC_DISABLE_SHARED): New, like opcodes/.
(LT_INIT): Likewise.
(AM_INSTALL_LIBBFD): Likewise.
(dlopen): Note why this is necessary in a comment.
(SHARED_LIBADD): Initialize for possibly-PIC libiberty: derived from
opcodes/.
(SHARED_LDFLAGS): Likewise.
(BFD_LIBADD): Likewise, for libbfd.
(BFD_DEPENDENCIES): Likewise.
(VERSION_FLAGS): Initialize, using a version script if ld supports
one, or libtool -export-symbols-regex otherwise.
(AC_CONFIG_MACRO_DIR): Add ../BFD.
* Makefile.am (ACLOCAL_AMFLAGS): Likewise.
(INCDIR): New.
(AM_CPPFLAGS): Use $(srcdir), not $(top_srcdir).
(noinst_LIBRARIES): Replace with...
[INSTALL_LIBBFD] (lib_LTLIBRARIES): This, or...
[!INSTALL_LIBBFD] (noinst_LTLIBRARIES): ... this, mentioning new
libctf-nobfd.la as well.
[INSTALL_LIBCTF] (include_HEADERS): Add the CTF headers.
[!INSTALL_LIBCTF] (include_HEADERS): New, empty.
(libctf_a_SOURCES): Rename to...
(libctf_nobfd_la_SOURCES): ... this, all of libctf other than
ctf-open-bfd.c.
(libctf_la_SOURCES): Now derived from libctf_nobfd_la_SOURCES,
with ctf-open-bfd.c added.
(libctf_nobfd_la_LIBADD): New, using @SHARED_LIBADD@.
(libctf_la_LIBADD): New, using @BFD_LIBADD@ as well.
(libctf_la_DEPENDENCIES): New, using @BFD_DEPENDENCIES@.
* Makefile.am [INSTALL_LIBCTF]: Use it.
* aclocal.m4: Add ../bfd/acinclude.m4, ../config/acx.m4, and the
libtool macros.
* libctf.ver: New, everything is version LIBCTF_1.0 currently (even
the unstable components).
* Makefile.in: Regenerated.
* config.h.in: Likewise.
* configure: Likewise.
binutils/
* Makefile.am (LIBCTF): Mention the .la file.
(LIBCTF_NOBFD): New.
(readelf_DEPENDENCIES): Use it.
(readelf_LDADD): Likewise.
* Makefile.in: Regenerated.
ld/
* configure.ac (TESTCTFLIB): Set to the .so or .a, like TESTBFDLIB.
* Makefile.am (TESTCTFLIB): Use it.
(LIBCTF): Use the .la file.
(check-DEJAGNU): Use it.
* Makefile.in: Regenerated.
* configure: Likewise.
include/
* ctf-api.h: Note the instability of the ctf_link interfaces.
We were only loading them when explicitly requested, which leads to
strings that point off into empty space (into the non-loaded "external"
ELF string table). Avoid this unfortunate consequence by loading the
strtab and symtab by default, unless a blank name is given.
binutils/
* readelf.c (dump_ctf_symtab_name): Give default value.
(dump_ctf_strtab_name): Likewise.
(dump_section_as_ctf): Allow for the null string.
The CTF header has before now been thrown away too soon to be dumped
using the ctf_dump() machinery used by objdump and readelf: instead, a
kludge involving debugging-priority dumps of the header offsets on every
open was used.
Replace this with proper first-class dumping machinery just like
everything else in the CTF file, and have objdump and readelf use it.
(The dumper already had an enum value in ctf_sect_names_t for this
purpose, waiting to be used.)
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_file_t): New field ctf_openflags.
* ctf-open.c (ctf_bufopen): Set it. No longer dump header offsets.
* ctf-dump.c (dump_header): New function, dump the CTF header.
(ctf_dump): Call it.
(ctf_dump_header_strfield): New function.
(ctf_dump_header_sectfield): Likewise.
binutils/
* objdump.c (dump_ctf_archive_member): Dump the CTF header.
* readelf.c (dump_section_as_ctf): Likewise.
PR 24942
* objcopy.c (copy_usage): Update description of
--set-section-alignment.
(copy_main): Interpret numeric argument of --set-section-alignment
as a byte alignment, not a power of two alignment.
* doc/binutils.texi: Update description of
--set-section-alignment.
* testsuite/binutils-all/set-section-alignment.d: New test.
* testsuite/binutils-all/objcopy.exp: Run the new test.
Using saved_format breaks when nm is presented with multiple object
files, some 32-bit and some 64-bit.
PR 25031
* nm.c (print_format_string): New.
(get_print_format): Delete saved_format. Move earlier.
(set_print_width): Call get_print_format.
(print_value): Use print_format_string.
Pointer comparisons after adding an offset just don't work to catch
overflow when the offset is a larger type than the pointer.
PR 25018
* dwarf.c (get_type_signedness): Delete ineffective pointer
comparison check. Properly range check uvalue offset on
recursive call.
(read_and_display_attr_value): Range check uvalue offset before
calling get_type_signedness.
The newly added objdump -S tests check for source line mapping of a static
variable. But the test doesn't dump any data sections so this should never
pass.
This changes the test to dump all sections so the source mapping can be found.
binutils/ChangeLog:
* testsuite/binutils-all/objdump.exp (objdump -S): Update testcases.
There is a bunch of things left over after a `make clean` in the doc
directory. This patch changes the Makefile so that everything built by
make is cleaned:
- man pages (the man_MANS variable)
- cxxfilt.man
- binutils.info
I am not sure why the last one was in MAINTAINERCLEANFILES. It's
generated from binutils.texi using makeinfo, and it's not particularly
long to build, so I don't see why it shouldn't be cleaned like the other
files.
Note: with my automake 1,15.1 (built from source), I get a spurious diff
in Makefile.in, where the
runstatedir = @runstatedir@
line gets removed. I am not sure why, but I haven't included it.
binutils/ChangeLog:
* doc/Makefile.am (MOSTLYCLEANFILES): Clean all man pages,
cxxfilt.man and binutils.info.
(MAINTAINERCLEANFILES): Remove.
* doc/Makefile.in: Re-generate.
This variable doesn't exist (it evaluates to nothing).
It was introduced in
commit 42ecbf5eda
Author: Daniel Jacobowitz <drow@false.org>
Date: Sun May 15 18:19:45 2005 +0000
And removed in
commit c428fa83c2
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Thu Mar 15 14:17:20 2007 +0000
Note: with my automake 1,15.1 (built from source), I get a spurious diff
in Makefile.in, where the
runstatedir = @runstatedir@
line gets removed. I am not sure why, but I haven't included it.
binutils/ChangeLog:
* doc/Makefile.am: Remove references to binutils_TEXINFOS.
* doc/Makefile.in: Re-generate.
The `install-data-local: install-info` part: the comment refers to when
the Makefile had the cygnus option. It no longer uses that, so the info
file should get installed without that rule. I verified that `make
install` still installed $(prefix)/share/info/binutils.info.
The `DISTCLEANFILES` part: the comment talks about Automake 1.9, we are
using 1.15.1, which doesn't appear to have this problem. binutils.info
is built fine without this snippet.
Note: with my automake 1,15.1 (built from source), I get a spurious diff
in Makefile.in, where the
runstatedir = @runstatedir@
line gets removed. I am not sure why, but I haven't included it.
binutils/ChangeLog:
* doc/Makefile.am (install-data-loca): Remove target.
(DISTCLEANFILES): Remove variable.
* doc/Makefile.in: Re-generate.
I get some spurious changes when running autoconf/automake for various
projects in the tree. This is likely because they were generated using
distro-patched tools last time.
I ran `autoreconf -f` in the various automake projects of the
binutils-gdb tree, and this is the result. The tools I am using have
been compiled from source, from the upstream release.
bfd/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gas/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gold/ChangeLog:
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
ld/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
opcodes/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
This constifies the argument to make_tempname and make_tempdir,
removing some casts.
I initially thought that this obsoleted the allocation in
write_archive, but write_archive closes the BFD before using the name,
so this appears not to be the case.
binutils/ChangeLog
2019-09-11 Tom Tromey <tom@tromey.com>
* objcopy.c (copy_archive): Update.
* bucomm.h (make_tempname, make_tempdir): Make argument const.
* bucomm.c (make_tempname, make_tempdir): Make argument const.
I don't see a need to calculate "ptr = start + uvalue" then compare
"ptr" with "start" and "end". Given "start <= end" on entry, the
"uvalue" comparison with "max_uvalue" ought to be sufficient to ensure
"start + uvalue" is bounded by "start" and "end" regardless of the
size of pointers and the unsigned dwarf_vma integer type.
* dwarf.c (check_uvalue): Remove unnecessary pointer checks.
PR 24931
* objdump.c (source_comment): New static variable.
(option_values): Add OPTION_SOURCE_COMMENT.
(long_opions): Add --source-comment.
(print_line): If source comment is set, use it as a prefix to the
source code line.
(main): Handle OPTION_SOURCE_COMMENT.
* doc/binutils.texi: Document the new option.
* NEWS: Mention the new feature.
* testsuite/binutils-all/objdump.exp (test_objdump_S): Add tests
of the -S and --source-comment options.
PR 24829
* dwarf.c (check_uvalue): New function. Ensures that a block's
size is valid.
(read_and_display_attr_value): Use check_value when processsing
DW_FORM_block<n> attributes.
Given 32-bit pointers and a 64-bit bfd_size_type, it is relatively
easy to construct a value of augmentation_data_len (eg. 0x100000000)
that won't fail pointer checks but will print without bounds.
PR 24898
* dwarf.c (display_debug_frames): Use the read_cie check and error
for augmentation data length.
Alan Modra
H.J. Lu
Nick Clifton
Jozef Lawrynowicz
Nick Alcock
Tamar Christina
Simon Marchi
Phil Blundell
Tom Tromey
Niklas G?rtler