The stub size in GO32 executables has historically been fixed at 2048
bytes, due to hardcoded limitations in bfd. Recent patches to djgpp by
Stas Sergeev (CC'd) have pushed the stub right up to this limit, so if
any further expansion is desired, this must first be patched in bfd.
This series includes three patches: The first changes the meaning of
the bfd->origin field slightly, so that target code can use this to
specify an offset into the file where the actual bfd is located.
The second patch then uses this to enable support for variable-sized
stubs in the coff-go32-exe format.
The final patch is only a cleanup, it normalizes function and variable
names in coff-stgo32.c so that they all begin with the same prefix.
bfd * bfdio.c (bfd_bread, bfd_tell, bfd_seek, bfd_mmap): Always add
bfd->origin to file offset.
* bfdwin.c (bfd_get_file_window): Likewise.
* bfd.c: Clarify the use of the bfd->origin field.
* bfd-in2.h: Regenerate.
* coff-i386.c: Don't include go32exe.h. Allow overriding
coff_write_object_contents via COFF_WRITE_CONTENTS.
* coff-stgo32.c (go32exe_cleanup, go32exe_mkobject)
(go32exe_write_object_contents): New functions.
(go32exe_temp_stub, go32exe_temp_stub_size): New static globals.
(COFF_WRITE_CONTENTS, GO32EXE_DEFAULT_STUB_SIZE): Define.
(create_go32_stub): Remove check for 2k size limit. Read stub
from go32exe_temp_stub if present.
(go32_stubbed_coff_bfd_copy_private_bfd_data): Allocate and
copy variable-length stub.
(go32_check_format): Read stub to go32exe_temp_stub, set
origin, return go32exe_cleanup.
(adjust_filehdr_in_post, adjust_filehdr_out_pre)
(adjust_filehdr_out_post, adjust_scnhdr_in_post)
(adjust_scnhdr_out_pre, adjust_scnhdr_out_post)
(adjust_aux_in_post, adjust_aux_out_pre, adjust_aux_out_post):
Remove functions and their associated #defines.
* coffcode.h (coff_mkobject_hook): Remove stub copying code.
* libcoff-in.h: (struct coff_tdata): New field stub_size.
Rename field go32stub to stub.
* libcoff.h: Regenerate.
* coff-stgo32.c (go32_check_format): Rename to...
(go32exe_check_format): ...this.
(go32_stubbed_coff_bfd_copy_private_bfd_data): Rename to...
(go32exe_copy_private_bfd_data): ...this.
(stub_bytes): Rename to...
(go32exe_default_stub): ...this.
(create_go32_stub): Rename to...
(go32exe_create_stub): ...this.
* coff-stgo32.c (go32exe_copy_private_bfd_data): Avoid realloc
when possible.
include * coff/go32exe.h: Remove file.
* coff/internal.h (struct internal_filehdr): Remove field
go32stub. Remove flag F_GO32STUB.
FreeBSD's kernel recently added a new ELF auxiliary vector entry
holding a mask of software features provided by the kernel. This
change fixes 'info auxv' to report the name and description for this
vector entry instead of '???'.
include/ChangeLog:
* elf/common.h (AT_FREEBSD_BSDFLAGS): Define.
gdb/ChangeLog:
* fbsd-tdep.c (fbsd_print_auxv_entry): Handle AT_FREEBSD_BSDFLAGS.
Fix comma at end of enumerator list seen with -std=c++98.
* plugin-api.h (enum ld_plugin_symbol_type): Remove
comma after last value of an enum.
* lto-symtab.h (enum gcc_plugin_symbol_type): Likewise.
bfd/ChangeLog:
* elf.c (elfcore_grok_netbsd_note): Add support for
NT_NETBSDCORE_LWPSTATUS notes.
binutils/ChangeLog:
* readelf.c (get_netbsd_elfcore_note_type): Add support for
NT_NETBSDCORE_LWPSTATUS notes.
include/ChangeLog:
* elf/common.h (NT_NETBSDCORE_LWPSTATUS): New define.
Fixes additional locations not handled in the first patch.
When converting between addresses in ELF headers [octets] and bfd
LMA/VMA [bytes], the number of octets per byte needs to be incorporated.
include/
* bfdlink.h (struct bfd_link_order): Add unit (bytes/octets) to
offset and size members.
* elf/internal.h (struct elf_internal_phdr): Likewise for
p_align member.
(struct elf_segment_map): Likewise for p_paddr and p_size
members
bfd/
* bfd.c (bfd_record_phdr): New local "opb". Fix assignment of
"p_paddr" from "at".
* elfcode.h (bfd_from_remote_memory): Add units to several
parameters. New local "opb". Fix usage of p_align. Fix
calculation of "localbase" from "ehdr_vma" and "p_vaddr". Fix
call of target_read_memory.
* elflink.c (elf_fixup_link_order): Fix scope of "s" local. Fix
calculation of "offset" and "output_offset".
(bfd_elf_final_link): New local "opb". Fix calculation of "size"
from "offset" and fix calculation of "end" from "vma+size". Fix
comparison between "sh_addr" and "vma"/"output_offset".
(bfd_elf_discard_info): Fix calculation of "eh_alignment".
* elf-bfd.h (struct elf_link_hash_table): Add unit to tls_size
member.
* elf.c (_bfd_elf_map_sections_to_segments): Add unit (bytes/
octets) to "wrap_to2 and "phdr_size" locals. Fix calculation of
"wrap_to" value. Add unit (bytes) to phdr_lma variable. Fix
assignment of p_paddr from phdr_lma. Fix comparison between
"lma+size" and "next->lma".
(elf_sort_segments): Fix assignment from p_paddr to lma.
(assign_file_positions_for_load_sections): Add unit (bytes) to
local "align". Fix calculation of local "off_adjust". Fix
calculation of local "filehdr_vaddr".
(assign_file_positions_for_non_load_sections): New local "opb".
Fix calculation of "end" from "p_size". Fix comparison between
"vma+SECTION_SIZE" and "start". Fix calculation of "p_memsz"
from "end" and "p_vaddr".
(rewrite_elf_program_header): Fix comparison between p_vaddr and
vma. Fix assignment to p_paddr from lma. Fix comparison between
p_paddr and lma. Fix assignment to p_paddr from lma.
* merge.c (sec_merge_emit): New local "opb". Convert
"alignment_power" to octets.
(_bfd_add_merge_section): New locals "alignment_power" and
"opb". Fix comparison between "alignment_power" and
"sizeof(align)".
(_bfd_merge_sections): New local "opb". Divide size by opb
before checking align mask.
When converting between addresses in ELF headers [octets] and bfd
LMA/VMA [bytes], the number of octets per byte needs to be
incorporated.
In ld, the SIZEOF_HEADERS linker script statement must be resolved to
bytes instead of octets.
include/
* elf/internal.h (struct elf_internal_phdr): Add unit (octets)
to several member field comments.
(Elf_Internal_Shdr): likewise.
bfd/
* elf.c (_bfd_elf_make_section_from_shdr): Introduce new temp
opb. Divide Elf_Internal_Shdr::sh_addr by opb when setting
section LMA/VMA.
(_bfd_elf_make_section_from_phdr): Similarly.
(elf_fake_sections): Fix calculation of
Elf_Internal_shdr::sh_addr from section VMA.
(_bfd_elf_map_sections_to_segments): Fix mixup between octets
and bytes.
(assign_file_positions_for_load_sections): Fix calculations of
Elf_Internal_shdr::p_vaddr and p_paddr from section LMA/VMA. Fix
comparison between program header address and section LMA.
(assign_file_positions_for_non_load_sections): Likewise.
(rewrite_elf_program_header): Likewise. Introduce new temp opb.
(IS_CONTAINED_BY_VMA): Add parameter opb.
(IS_CONTAINED_BY_LMA,IS_SECTION_IN_INPUT_SEGMENT,
INCLUDE_SECTION_IN_SEGMENT): Likewise.
(copy_elf_program_header): Update call to ELF_SECTION_IN_SEGMENT.
Fix calculations of p_addr_valid and p_vaddr_offset.
* elflink.c (elf_link_add_object_symbols): Multiply section VMA
with octets per byte when comparing against p_vaddr.
ld/
* ldexp.c (fold_name): Return SIZEOF_HEADERS in bytes.
This commit pulls in the latest changes for the include/ and
libiberty/ directories. The last sync was in commit
533da48302.
This commit also removes the file libiberty/rust-demangle.h, this file
has been removed in upstream GCC, and should have been deleted as part
of the previous sync up, which included this ChangeLog entry:
2019-11-16 Eduard-Mihai Burtescu <eddyb@lyken.rs>
....
* rust-demangle.h: Remove.
I've grep'd over the binutils-gdb source and can find no reference to
the rust-demangle.h file, and everything seems to build fine without
it, so I assume its continued existence was a mistake.
include/ChangeLog:
Import from gcc mainline:
2020-02-05 Andrew Burgess <andrew.burgess@embecosm.com>
* hashtab.h (htab_remove_elt): Make a parameter const.
(htab_remove_elt_with_hash): Likewise.
libiberty/ChangeLog:
* rust-demangle.h: Removed.
Import from gcc mainline:
2020-02-05 Andrew Burgess <andrew.burgess@embecosm.com>
* hashtab.c (htab_remove_elt): Make a parameter const.
(htab_remove_elt_with_hash): Likewise.
2020-01-23 Alexandre Oliva <oliva@adacore.com>
* argv.c (writeargv): Output empty args as "".
2020-01-18 Iain Sandoe <iain@sandoe.co.uk>
* cp-demangle.c (cplus_demangle_operators): Add the co_await
operator.
* testsuite/demangle-expected: Test co_await operator mangling.
According to the riscv privilege spec, some CSR are only valid when rv32 or
the specific extension is set. We extend the DECLARE_CSR and DECLARE_CSR_ALIAS
to record more informaton we need, and then check whether the CSR is valid
according to these information. We report warning message when the CSR is
invalid, so we have a choice between error and warning by --fatal-warnings
option. Also, a --no-warn/-W option is used to turn the warnings off, if
people don't want the warnings.
gas/
* config/tc-riscv.c (enum riscv_csr_class): New enum. Used to decide
whether or not this CSR is legal in the current ISA string.
(struct riscv_csr_extra): New structure to hold all extra information
of CSR.
(riscv_init_csr_hash): New function. According to the DECLARE_CSR and
DECLARE_CSR_ALIAS, insert CSR extra information into csr_extra_hash.
Call hash_reg_name to insert CSR address into reg_names_hash.
(md_begin): Call riscv_init_csr_hashes for each DECLARE_CSR.
(reg_csr_lookup_internal, riscv_csr_class_check): New functions.
Decide whether the CSR is valid according to the csr_extra_hash.
(init_opcode_hash): Update 'if (hash_error != NULL)' as hash_error is
not a boolean. This is same as riscv_init_csr_hash, so keep the
consistent usage.
* testsuite/gas/riscv/csr-dw-regnums.d: Add -march=rv32if option.
* testsuite/gas/riscv/priv-reg.d: Add f-ext by -march option.
* testsuite/gas/riscv/priv-reg-fail-fext.d: New testcase. The source
file is `priv-reg.s`, and the ISA is rv32i without f-ext, so the
f-ext CSR are not allowed.
* testsuite/gas/riscv/priv-reg-fail-fext.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-rv32-only.d: New testcase. The
source file is `priv-reg.s`, and the ISA is rv64if, so the
rv32-only CSR are not allowed.
* testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
include/
* opcode/riscv-opc.h: Extend DECLARE_CSR and DECLARE_CSR_ALIAS to
record riscv_csr_class.
opcodes/
* riscv-dis.c (print_insn_args): Updated since the DECLARE_CSR is changed.
gdb/
* riscv-tdep.c: Updated since the DECLARE_CSR is changed.
* riscv-tdep.h: Likewise.
* features/riscv/rebuild-csr-xml.sh: Generate the 64bit-csr.xml without
rv32-only CSR.
* features/riscv/64bit-csr.xml: Regernated.
binutils/
* dwarf.c: Updated since the DECLARE_CSR is changed.
This patch is part of a series that adds support for the Armv8.m
ARMv8.m Custom Datapath Extension to binutils.
This patch introduces the Custom Instructions Class 1/2/3 (Single/
Dual, Accumulator/Non-accumulator varianats) to the arm backend.
The following Custom Instructions are added: cx1, cx1a,
cx1d, cx1da, cx2, cx2a, cx2d, cx2da, cx3, cx3a, cx3d, cx3da.
Specification can be found at
https://developer.arm.com/docs/ddi0607/latest
This patch distinguishes between enabling CDE for different coprocessor
numbers by defining multiple architecture flags. This means that the
parsing of the architecture extension flags is kept entirely in the
existing code path.
We introduce a new IT block state to indicate the behaviour of these
instructions. This new state allows being used in an IT block or
outside an IT block, but does not allow the instruction to be used
inside a VPT block.
We need this since the CX*A instruction versions can be used in IT
blocks, but they aren't to have the conditional suffixes on them. Hence
we need to mark an instruction as allowed in either position.
We also need a new flag to objdump, in order to determine whether to
disassemble an instruction as CDE related or not.
Successfully regression tested on arm-none-eabi, and arm-wince-pe.
gas/ChangeLog:
2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com>
Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-arm.c (arm_ext_cde*): New feature sets for each
CDE coprocessor that can be enabled.
(enum pred_instruction_type): New pred type.
(BAD_NO_VPT): New error message.
(BAD_CDE): New error message.
(BAD_CDE_COPROC): New error message.
(enum operand_parse_code): Add new immediate operands.
(parse_operands): Account for new immediate operands.
(check_cde_operand): New.
(cde_coproc_enabled): New.
(cde_coproc_pos): New.
(cde_handle_coproc): New.
(cxn_handle_predication): New.
(do_custom_instruction_1): New.
(do_custom_instruction_2): New.
(do_custom_instruction_3): New.
(do_cx1): New.
(do_cx1a): New.
(do_cx1d): New.
(do_cx1da): New.
(do_cx2): New.
(do_cx2a): New.
(do_cx2d): New.
(do_cx2da): New.
(do_cx3): New.
(do_cx3a): New.
(do_cx3d): New.
(do_cx3da): New.
(handle_pred_state): Define new IT block behaviour.
(insns): Add newn CX*{,d}{,a} instructions.
(CDE_EXTENSIONS,armv8m_main_ext_table,armv8_1m_main_ext_table):
Define new cdecp extension strings.
* doc/c-arm.texi: Document new cdecp extension arguments.
* testsuite/gas/arm/cde-scalar.d: New test.
* testsuite/gas/arm/cde-scalar.s: New test.
* testsuite/gas/arm/cde-warnings.d: New test.
* testsuite/gas/arm/cde-warnings.l: New test.
* testsuite/gas/arm/cde-warnings.s: New test.
* testsuite/gas/arm/cde.d: New test.
* testsuite/gas/arm/cde.s: New test.
include/ChangeLog:
2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com>
Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/arm.h (ARM_EXT2_CDE): New extension macro.
(ARM_EXT2_CDE0): New extension macro.
(ARM_EXT2_CDE1): New extension macro.
(ARM_EXT2_CDE2): New extension macro.
(ARM_EXT2_CDE3): New extension macro.
(ARM_EXT2_CDE4): New extension macro.
(ARM_EXT2_CDE5): New extension macro.
(ARM_EXT2_CDE6): New extension macro.
(ARM_EXT2_CDE7): New extension macro.
opcodes/ChangeLog:
2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com>
Matthew Malcomson <matthew.malcomson@arm.com>
* arm-dis.c (struct cdeopcode32): New.
(CDE_OPCODE): New macro.
(cde_opcodes): New disassembly table.
(regnames): New option to table.
(cde_coprocs): New global variable.
(print_insn_cde): New
(print_insn_thumb32): Use print_insn_cde.
(parse_arm_disassembler_options): Parse coprocN args.
PR 25469
bfd * archures.c: Add GBZ80 and Z80N machine values.
* reloc.c: Add BFD_RELOC_Z80_16_BE.
* coff-z80.c: Add support for new reloc.
* coffcode.h: Add support for new machine values.
* cpu-z80.c: Add support for new machine names.
* elf32-z80.c: Add support for new reloc.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
binutils* readelf.c (get_machine_flags): Add support for Z80N machine
number.
gas * config/tc-z80.c: Add -gbz80 command line option to generate code
for the GameBoy Z80. Add support for generating DWARF.
* config/tc-z80.h: Add support for DWARF debug information
generation.
* doc/c-z80.texi: Document new command line option.
* testsuite/gas/z80/gbz80_all.d: New file.
* testsuite/gas/z80/gbz80_all.s: New file.
* testsuite/gas/z80/z80.exp: Run the new tests.
* testsuite/gas/z80/z80n_all.d: New file.
* testsuite/gas/z80/z80n_all.s: New file.
* testsuite/gas/z80/z80n_reloc.d: New file.
include * coff/internal.h (R_IMM16BE): Define.
* elf/z80.h (EF_Z80_MACH_Z80N): Define.
(R_Z80_16_BE): New reloc.
ld * emulparams/elf32z80.sh: Use z80 emulation.
* emultempl/z80.em: Make generic to both COFF and ELF Z80 emulations.
* emultempl/z80elf.em: Delete.
* testsuite/ld-elf/pr22450.d: Expect to fail for the Z80.
* testsuite/ld-elf/sec64k.exp: Fix Z80 assembly.
* testsuite/ld-unique/pr21529.s: Avoid register name conflict.
* testsuite/ld-unique/unique.s: Likewise.
* testsuite/ld-unique/unique_empty.s: Likewise.
* testsuite/ld-unique/unique_shared.s: Likewise.
* testsuite/ld-unique/unique.d: Updated expected output.
* testsuite/ld-z80/arch_z80n.d: New file.
* testsuite/ld-z80/comb_arch_z80_z80n.d: New file.
* testsuite/ld-z80/labels.s: Add more labels.
* testsuite/ld-z80/relocs.s: Add more reloc tests.
* testsuite/ld-z80/relocs_f_z80n.d: New file
opcodes * z80-dis.c: Add support for GBZ80 opcodes.
IMAGE_DEBUG_TYPE_REPRO is defined in the latest version of the PE
specification [1]. The others are defined in Windows SDK headers and/or
reported by DUMPBIN.
[1] https://docs.microsoft.com/en-us/windows/win32/debug/pe-format
bfd/ChangeLog:
2020-01-16 Jon Turney <jon.turney@dronecode.org.uk>
* peXXigen.c (debug_type_names): Add names for new debug data type
values.
include/ChangeLog:
2020-01-16 Jon Turney <jon.turney@dronecode.org.uk>
* coff/internal.h (PE_IMAGE_DEBUG_TYPE_VC_FEATURE)
(PE_IMAGE_DEBUG_TYPE_POGO, PE_IMAGE_DEBUG_TYPE_ILTCG)
(PE_IMAGE_DEBUG_TYPE_MPX, PE_IMAGE_DEBUG_TYPE_REPRO): Add.
This patch moves MVE feature bits into the CORE_HIGH section. This makes sure
.fpu and -mfpu does not reset the bits set by MVE. This is important because
.fpu has no option to "set" these same bits and thus, mimic'ing GCC, we choose
to define MVE as an architecture extension rather than put it together with
other the legacy fpu features.
This will enable the following behavior:
.arch armv8.1-m.main
.arch mve
.fpu fpv5-sp-d16 #does not disable mve.
vadd.i32 q0, q1, q2
This patch also makes sure MVE is not taken into account during auto-detect.
This was already the case, but because we moved the MVE bits to the
architecture feature space we must make sure ARM_ANY does not include MVE.
gas/ChangeLog:
2020-01-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
PR 25376
* config/tc-arm.c (mve_ext, mve_fp_ext): Use CORE_HIGH.
(armv8_1m_main_ext_table): Use CORE_HIGH for mve.
* testsuite/arm/armv8_1-m-fpu-mve-1.s: New.
* testsuite/arm/armv8_1-m-fpu-mve-1.d: New.
* testsuite/arm/armv8_1-m-fpu-mve-2.s: New.
* testsuite/arm/armv8_1-m-fpu-mve-2.d: New.
include/ChangeLog:
2020-01-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
PR 25376
* opcodes/arm.h (FPU_MVE, FPU_MVE_FPU): Move these features to...
(ARM_EXT2_MVE, ARM_EXT2_MVE_FP): ... the CORE_HIGH space.
(ARM_ANY): Redefine to not include any MVE bits.
(ARM_FEATURE_ALL): Removed.
opcodes/ChangeLog:
2020-01-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
PR 25376
* opcodes/arm-dis.c (coprocessor_opcodes): Use CORE_HIGH for MVE bits.
(neon_opcodes): Likewise.
(select_arm_features): Make sure we enable MVE bits when selecting
armv8.1-m.main. Make sure we do not enable MVE bits when not selecting
any architecture.
gas/ChangeLog:
2020-01-15 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/tc-msp430.c (CHECK_RELOC_MSP430): Always generate 430X
relocations when the target is 430X, except when extracting part of an
expression.
(msp430_srcoperand): Adjust comment.
Initialize the expp member of the msp430_operand_s struct as
appropriate.
(msp430_dstoperand): Likewise.
* testsuite/gas/msp430/msp430.exp: Run new test.
* testsuite/gas/msp430/reloc-lo-430x.d: New test.
* testsuite/gas/msp430/reloc-lo-430x.s: New test.
include/ChangeLog:
2020-01-15 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* opcode/msp430.h (enum msp430_expp_e): New.
(struct msp430_operand_s): Add expp member to struct.
ld/ChangeLog:
2020-01-15 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new test.
* testsuite/ld-msp430-elf/reloc-lo-430x.s: New test.
Don't do that. Especially don't use shift counts that assume the type
being shifted is 32 bits when the type is long/unsigned long. Also
reverts part of a change I made on 2019-12-11 to tic4x_print_register
that on closer inspection turns out to be unnecessary.
include/
* opcode/tic4x.h (EXTR): Delete.
(EXTRU, EXTRS, INSERTU, INSERTS): Rewrite without zero/sign
extension using shifts. Do trim INSERTU value to specified bitfield.
opcodes/
* tic4x-dis.c (tic4x_print_register): Remove dead code.
gas/
* config/tc-tic4x.c (tic4x_operands_match): Correct tic3x trap
insertion.
Also fixes a real bug. The DECODE_INSN_I9a and DECODE_INSN_I9b both
use UNSIGNED_EXTRACT for 7 low bits of the result, but this was an
unsigned value due to "insn" being unsigned. DECODE_INSN_I9* is
therefore unsigned too, leading to a zero extension in an expression
using a bfd_vma if bfd_vma is 64 bits.
* opcode/spu.h: Formatting.
(UNSIGNED_EXTRACT): Use 1u.
(SIGNED_EXTRACT): Don't sign extend with shifts.
(DECODE_INSN_I9a, DECODE_INSN_I9b): Avoid left shift of signed value.
Keep result signed.
(DECODE_INSN_U9a, DECODE_INSN_U9b): Delete.
This patch changes the "class" of LLOCK/SCOND from "MEMORY" to
"LLOCK/SCOND" respectively. Moreover, it corrects the "data_size_mode".
These changes are necessary for GDB's atmoic sequence handler.
Signed-off-by: Shahab Vahedi <shahab@synopsys.com>
PR 25224
bfd * Makefile.am: Add z80-elf target support.
* configure.ac: Likewise.
* targets.c: Likewise.
* config.bfd: Add z80-elf target support and new arches: ez80 and z180.
* elf32-z80.c: New file.
* archures.c: Add new z80 architectures: eZ80 and Z180.
* coffcode.h: Likewise.
* cpu-z80.c: Likewise.
* bfd-in2.h: Likewise plus additional Z80 relocations.
* coff-z80.c: Add new relocations for Z80 target and local label check.
gas * config/tc-z80.c: Add new architectures: Z180 and eZ80. Add support
for assembler code generated by SDCC. Add new relocation types. Add
z80-elf target support.
* config/tc-z80.h: Add z80-elf target support. Enable dollar local
labels. Local labels starts from ".L".
* testsuite/gas/all/fwdexp.d: Fix failure due to symbol conflict.
* testsuite/gas/all/fwdexp.s: Likewise.
* testsuite/gas/z80/suffix.d: Fix failure on ELF target.
* testsuite/gas/z80/z80.exp: Add new tests
* testsuite/gas/z80/dollar.d: New file.
* testsuite/gas/z80/dollar.s: New file.
* testsuite/gas/z80/ez80_adl_all.d: New file.
* testsuite/gas/z80/ez80_adl_all.s: New file.
* testsuite/gas/z80/ez80_adl_suf.d: New file.
* testsuite/gas/z80/ez80_isuf.s: New file.
* testsuite/gas/z80/ez80_z80_all.d: New file.
* testsuite/gas/z80/ez80_z80_all.s: New file.
* testsuite/gas/z80/ez80_z80_suf.d: New file.
* testsuite/gas/z80/r800_extra.d: New file.
* testsuite/gas/z80/r800_extra.s: New file.
* testsuite/gas/z80/r800_ii8.d: New file.
* testsuite/gas/z80/r800_z80_doc.d: New file.
* testsuite/gas/z80/z180.d: New file.
* testsuite/gas/z80/z180.s: New file.
* testsuite/gas/z80/z180_z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.s: New file.
* testsuite/gas/z80/z80_ii8.d: New file.
* testsuite/gas/z80/z80_ii8.s: New file.
* testsuite/gas/z80/z80_in_f_c.d: New file.
* testsuite/gas/z80/z80_in_f_c.s: New file.
* testsuite/gas/z80/z80_op_ii_ld.d: New file.
* testsuite/gas/z80/z80_op_ii_ld.s: New file.
* testsuite/gas/z80/z80_out_c_0.d: New file.
* testsuite/gas/z80/z80_out_c_0.s: New file.
* testsuite/gas/z80/z80_reloc.d: New file.
* testsuite/gas/z80/z80_reloc.s: New file.
* testsuite/gas/z80/z80_sli.d: New file.
* testsuite/gas/z80/z80_sli.s: New file.
ld * Makefile.am: Add new target z80-elf
* configure.tgt: Likewise.
* emultempl/z80.em: Add support for eZ80 and Z180 architectures.
* emulparams/elf32z80.sh: New file.
* emultempl/z80elf.em: Likewise.
* testsuite/ld-z80/arch_ez80_adl.d: Likewise.
* testsuite/ld-z80/arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/arch_r800.d: Likewise.
* testsuite/ld-z80/arch_z180.d: Likewise.
* testsuite/ld-z80/arch_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_z180.d: Likewise.
* testsuite/ld-z80/labels.s: Likewise.
* testsuite/ld-z80/relocs.s: Likewise.
* testsuite/ld-z80/relocs_b_ez80.d: Likewise.
* testsuite/ld-z80/relocs_b_z80.d: Likewise.
* testsuite/ld-z80/relocs_f_z80.d: Likewise.
* testsuite/ld-z80/z80.exp: Likewise.
opcodes * z80-dis.c: Add support for eZ80 and Z80 instructions.
The ubsan complaint is fixed by the SBM change, with similar possible
complaints fixed by the EXTRACT change. The rest is just cleanup.
include/
* opcode/crx.h (inst <match>): Make unsigned int.
opcodes/
* crx-dis.c (EXTRACT, SBM): Avoid signed overflow.
(get_number_of_operands, getargtype, getbits, getregname),
(getcopregname, getprocregname, gettrapstring, getcinvstring),
(getregliststring, get_word_at_PC, get_words_at_PC, build_mask),
(powerof2, match_opcode, make_instruction, print_arguments),
(print_arg): Delete forward declarations, moving static to..
(getregname, getcopregname, getregliststring): ..these definitions.
(build_mask): Return unsigned int mask.
(match_opcode): Use unsigned int vars.
Note that using 1u in N32_BIT makes all of N32_BIT, __MASK, __MF, __GF
and __SEXT evaluate as unsigned int (the latter three when when their
v arg is int or smaller). This would be a problem if assigning the
result to a bfd_vma, long, or other type wider than an int since the
__SEXT result would be zero extended to the wider type. Fortunately
nds32 target code doesn't use wider types unnecessarily.
include/
* opcode/nds32.h (N32_BIT): Define using 1u.
(__SEXT): Use __MASK and N32_BIT.
(N32_IMMS): Remove duplicate mask.
opcodes/
* nds32-dis.c (print_insn16, print_insn32): Remove forward decls.
(struct objdump_disasm_info): Delete.
(nds32_parse_audio_ext, nds32_parse_opcode): Cast result of
N32_IMMS to unsigned before shifting left.
Attempting to build GDB in Ubuntu 16.04.6 LTS on x86_64, I ran into warnings
that caused the build to fail:
binutils-gdb/gdb/gdbsupport/safe-strerror.c:44:1: error: ‘char* select_strerror_r(char*, char*)’ defined but not used [-Werror=unused-function] select_strerror_r (char *res, char *)
The diagnostic macro DIAGNOSTIC_IGNORE_UNUSED_FUNCTION seems to expand
correctly to its respective pragma, but this doesn't seem to have an effect on
the warning. I tried to use the pragma explicitly and got the same result.
ATTRIBUTE_UNUSED works fine in this case if you put it in both functions,
which should fix warnings for both gdb and gdbserver builds.
The compiler version is gcc (Ubuntu 5.4.0-6ubuntu1~16.04.11) 5.4.0 20160609.
This is likely the result of PR64079 in GCC, which was fixed by commit
9e96f1e1b9731c4e1ef4fbbbf0997319973f0537.
To prevent other developers from attempting to use this macro, only to get
confused by it not working as expected, it seems better to not define this
particular macro.
gdb/ChangeLog:
2019-12-12 Luis Machado <luis.machado@linaro.org>
* gdbsupport/safe-strerror.c: Don't include diagnostics.h.
(select_strerror_r): Use ATTRIBUTE_UNUSED instead of the diagnostics
macros.
include/ChangeLog:
2019-12-12 Luis Machado <luis.machado@linaro.org>
* diagnostics.h (DIAGNOSTIC_IGNORE_UNUSED_FUNCTION). Remove
definitions.
Change-Id: Iad6123d61d76d111e3ef8d24aa8c60112304c749
This, at the assembler level, is just a "brace" feature covering both
AES and SHA2. Hence there's no need for it to have a separate feature
flag, freeing up a bit for future re-use. Along these lines there are
also a number of dead definitions/variables in the opcode table file.
All symbols, sizes and relocations in this section are octets instead of
bytes. Required for DWARF debug sections as DWARF information is
organized in octets, not bytes.
bfd/
* section.c (struct bfd_section): New flag SEC_ELF_OCTETS.
* archures.c (bfd_octets_per_byte): New parameter sec.
If section is not NULL and SEC_ELF_OCTETS is set, one octet es
returned [ELF targets only].
* bfd.c (bfd_get_section_limit): Provide section parameter to
bfd_octets_per_byte.
* bfd-in2.h: regenerate.
* binary.c (binary_set_section_contents): Move call to
bfd_octets_per_byte into section loop. Provide section parameter
to bfd_octets_per_byte.
* coff-arm.c (coff_arm_reloc): Provide section parameter
to bfd_octets_per_byte.
* coff-i386.c (coff_i386_reloc): likewise.
* coff-mips.c (mips_reflo_reloc): likewise.
* coff-x86_64.c (coff_amd64_reloc): likewise.
* cofflink.c (_bfd_coff_link_input_bfd): likewise.
(_bfd_coff_reloc_link_order): likewise.
* elf.c (_bfd_elf_section_offset): likewise.
(_bfd_elf_make_section_from_shdr): likewise.
Set SEC_ELF_OCTETS for sections with names .gnu.build.attributes,
.debug*, .zdebug* and .note.gnu*.
* elf32-msp430.c (rl78_sym_diff_handler): Provide section parameter
to bfd_octets_per_byte.
* elf32-nds.c (nds32_elf_get_relocated_section_contents): likewise.
* elf32-ppc.c (ppc_elf_addr16_ha_reloc): likewise.
* elf32-pru.c (pru_elf32_do_ldi32_relocate): likewise.
* elf32-s12z.c (opru18_reloc): likewise.
* elf32-sh.c (sh_elf_reloc): likewise.
* elf32-spu.c (spu_elf_rel9): likewise.
* elf32-xtensa.c (bfd_elf_xtensa_reloc): likewise
* elf64-ppc.c (ppc64_elf_brtaken_reloc): likewise.
(ppc64_elf_addr16_ha_reloc): likewise.
(ppc64_elf_toc64_reloc): likewise.
* elflink.c (bfd_elf_final_link): likewise.
(bfd_elf_perform_complex_relocation): likewise.
(elf_fixup_link_order): likewise.
(elf_link_input_bfd): likewise.
(elf_link_sort_relocs): likewise.
(elf_reloc_link_order): likewise.
(resolve_section): likewise.
* linker.c (_bfd_generic_reloc_link_order): likewise.
(bfd_generic_define_common_symbol): likewise.
(default_data_link_order): likewise.
(default_indirect_link_order): likewise.
* srec.c (srec_set_section_contents): likewise.
(srec_write_section): likewise.
* syms.c (_bfd_stab_section_find_nearest_line): likewise.
* reloc.c (_bfd_final_link_relocate): likewise.
(bfd_generic_get_relocated_section_contents): likewise.
(bfd_install_relocation): likewise.
For section which have SEC_ELF_OCTETS set, multiply output_base
and output_offset with bfd_octets_per_byte.
(bfd_perform_relocation): likewise.
include/
* coff/ti.h (GET_SCNHDR_SIZE, PUT_SCNHDR_SIZE, GET_SCN_SCNLEN),
(PUT_SCN_SCNLEN): Adjust bfd_octets_per_byte calls.
binutils/
* objdump.c (disassemble_data): Provide section parameter to
bfd_octets_per_byte.
(dump_section): likewise
(dump_section_header): likewise. Show SEC_ELF_OCTETS flag if set.
gas/
* as.h: Define SEC_OCTETS as SEC_ELF_OCTETS if OBJ_ELF.
* dwarf2dbg.c: (dwarf2_finish): Set section flag SEC_OCTETS for
.debug_line, .debug_info, .debug_abbrev, .debug_aranges, .debug_str
and .debug_ranges sections.
* write.c (maybe_generate_build_notes): Set section flag
SEC_OCTETS for .gnu.build.attributes section.
* frags.c (frag_now_fix): Don't divide by OCTETS_PER_BYTE if
SEC_OCTETS is set.
* symbols.c (resolve_symbol_value): Likewise.
ld/
* ldexp.c (fold_name): Provide section parameter to
bfd_octets_per_byte.
* ldlang (init_opb): New argument s. Set opb_shift to 0 if
SEC_ELF_OCTETS for the current section is set.
(print_input_section): Pass current section to init_opb.
(print_data_statement,print_reloc_statement,
print_padding_statement): Likewise.
(lang_check_section_addresses): Call init_opb for each
section.
(lang_size_sections_1,lang_size_sections_1,
lang_do_assignments_1): Likewise.
(lang_process): Pass NULL to init_opb.
This patch changes the CRC extension to use the core feature bits instead
of the coproc/fpu feature bits.
CRC is not an fpu feature and it causes issues with the new fpu reset
patch (f439988037). CRC can be set using
the '.arch_extension' directive, which sets bits in the coproc bitfield. When
a '.fpu' directive is encountered, the CRC feature bit gets removed and
there is no way to set it back using '.fpu'.
With this patch, CRC will be marked in the feature core bits, which prevents
it from getting removed when setting/changing the fpu options.
gas/ChangeLog:
* config/tc-arm.c (arm_ext_crc): New.
(crc_ext_armv8): Remove.
(insns): Rename crc_ext_armv8 to arm_ext_crc.
(arm_cpus): Replace CRC_EXT_ARMV8 with ARM_EXT2_CRC.
(armv8a_ext_table, armv8r_ext_table,
arm_option_extension_value_table): Redefine the crc
extension in terms of ARM_EXT2_CRC.
* gas/testsuite/gas/arm/crc-ext.s: New.
* gas/testsuite/gas/arm/crc-ext.d: New.
include/ChangeLog:
* opcode/arm.h (ARM_EXT2_CRC): New extension feature
to replace CRC_EXT_ARMV8.
(CRC_EXT_ARMV8): Remove and mark bit as unused.
(ARM_ARCH_V8A_CRC, ARM_ARCH_V8_1A, ARM_ARCH_V8_2A,
ARM_ARCH_V8_3A, ARM_ARCH_V8_4A, ARM_ARCH_V8_5A,
ARM_ARCH_V8_6A): Redefine using ARM_EXT2_CRC instead of
CRC_EXT_ARMV8.
opcodes/ChangeLog:
* opcodes/arm-dis.c (arm_opcodes, thumb32_opcodes):
Change the coproc CRC conditions to use the extension
feature set, second word, base on ARM_EXT2_CRC.
Add a flag to control the version of CIE that is generated. By
default gas produces CIE version 1, and this continues to be the
default after this patch.
However, a user can now provide --gdwarf-cie-version=NUMBER to switch
to either version 3 or version 4 of CIE, version 2 was never released,
and so causes an error as does any number less than 1 or greater than
4.
Producing version 4 CIE requires two new fields to be added to the
CIE, an address size field, and an segment selector field. For a flat
address space the DWARF specification indicates that the segment
selector should be 0, and the address size fields just contains the
address size in bytes. For now we support 4 or 8 byte addresses, and
the segment selector is always produced as 0. At some future time we
might need to allow targets to override this.
gas/ChangeLog:
* as.c (parse_args): Parse --gdwarf-cie-version option.
(flag_dwarf_cie_version): New variable.
* as.h (flag_dwarf_cie_version): Declare.
* dw2gencfi.c (output_cie): Switch from DW_CIE_VERSION to
flag_dwarf_cie_version.
* doc/as.texi (Overview): Document --gdwarf-cie-version.
* NEWS: Likewise.
* testsuite/gas/cfi/cfi.exp: Add new tests.
* testsuite/gas/cfi/cie-version-0.d: New file.
* testsuite/gas/cfi/cie-version-1.d: New file.
* testsuite/gas/cfi/cie-version-2.d: New file.
* testsuite/gas/cfi/cie-version-3.d: New file.
* testsuite/gas/cfi/cie-version-4.d: New file.
* testsuite/gas/cfi/cie-version.s: New file.
include/ChangeLog:
* dwarf2.h (DW_CIE_VERSION): Delete.
Change-Id: I9de19461aeb8332b5a57bbfe802953d0725a7ae8
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces the Matrix Multiply (Int8, F32, F64) extensions
to the arm backend.
The following Matrix Multiply instructions are added: vummla, vsmmla,
vusmmla, vusdot, vsudot[1].
[1]https://developer.arm.com/docs/ddi0597/latest/simd-and-floating-point-instructions-alphabetic-order
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* config/tc-arm.c (arm_ext_i8mm): New feature set.
(do_vusdot): New.
(do_vsudot): New.
(do_vsmmla): New.
(do_vummla): New.
(insns): Add vsmmla, vummla, vusmmla, vusdot, vsudot mnemonics.
(armv86a_ext_table): Add i8mm extension.
(arm_extensions): Move bf16 extension to context sensitive table.
(armv82a_ext_table, armv84a_ext_table, armv85a_ext_table):
Move bf16 extension to context sensitive table.
(armv86a_ext_table): Add i8mm extension.
* doc/c-arm.texi: Document i8mm extension.
* testsuite/gas/arm/i8mm.s: New test.
* testsuite/gas/arm/i8mm.d: New test.
* testsuite/gas/arm/bfloat17-cmdline-bad-3.d: Update test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* opcode/arm.h (ARM_EXT2_I8MM): New feature macro.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* arm-dis.c (neon_opcodes): Add i8mm SIMD instructions.
Regression tested on arm-none-eabi.
Is this ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces the Matrix Multiply (Int8, F32, F64) extensions
to the aarch64 backend.
The following instructions are added: {s/u}mmla, usmmla, {us/su}dot,
fmmla, ld1rob, ld1roh, d1row, ld1rod, uzip{1/2}, trn{1/2}.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* config/tc-aarch64.c: Add new arch fetures to suppport the mm extension.
(parse_operands): Add new operand.
* testsuite/gas/aarch64/i8mm.s: New test.
* testsuite/gas/aarch64/i8mm.d: New test.
* testsuite/gas/aarch64/f32mm.s: New test.
* testsuite/gas/aarch64/f32mm.d: New test.
* testsuite/gas/aarch64/f64mm.s: New test.
* testsuite/gas/aarch64/f64mm.d: New test.
* testsuite/gas/aarch64/sve-movprfx-mm.s: New test.
* testsuite/gas/aarch64/sve-movprfx-mm.d: New test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_I8MM): New.
(AARCH64_FEATURE_F32MM): New.
(AARCH64_FEATURE_F64MM): New.
(AARCH64_OPND_SVE_ADDR_RI_S4x32): New.
(enum aarch64_insn_class): Add new instruction class "aarch64_misc" for
instructions that do not require special handling.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* aarch64-tbl.h (aarch64_feature_i8mm_sve, aarch64_feature_f32mm_sve,
aarch64_feature_f64mm_sve, aarch64_feature_i8mm, aarch64_feature_f32mm,
aarch64_feature_f64mm): New feature sets.
(INT8MATMUL_INSN, F64MATMUL_SVE_INSN, F64MATMUL_INSN,
F32MATMUL_SVE_INSN, F32MATMUL_INSN): New macros to define matrix multiply
instructions.
(I8MM_SVE, F32MM_SVE, F64MM_SVE, I8MM, F32MM, F64MM): New feature set
macros.
(QL_MMLA64, OP_SVE_SBB): New qualifiers.
(OP_SVE_QQQ): New qualifier.
(INT8MATMUL_SVE_INSNC, F64MATMUL_SVE_INSNC,
F32MATMUL_SVE_INSNC): New feature set for bfloat16 instructions to support
the movprfx constraint.
(aarch64_opcode_table): Support for SVE_ADDR_RI_S4x32.
(aarch64_opcode_table): Define new instructions smmla,
ummla, usmmla, usdot, sudot, fmmla, ld1rob, ld1roh, ld1row, ld1rod
uzip{1/2}, trn{1/2}.
* aarch64-opc.c (operand_general_constraint_met_p): Handle
AARCH64_OPND_SVE_ADDR_RI_S4x32.
(aarch64_print_operand): Handle AARCH64_OPND_SVE_ADDR_RI_S4x32.
* aarch64-dis-2.c (aarch64_opcode_lookup_1, aarch64_find_next_opcode):
Account for new instructions.
* opcodes/aarch64-asm-2.c (aarch64_insert_operand): Support the new
S4x32 operand.
* aarch64-opc-2.c (aarch64_operands): Support the new S4x32 operand.
Regression tested on arm-none-eabi.
Is it ok for trunk?
Regards,
Mihail
Fangrui Song
Stephen Casner
Jan W. Jagersma
Martin Liska
Nelson Chu
John Baldwin
Kamil Rytarowski
Christophe Lyon
Christian Eggers
Alan Modra
Luis Machado
Andrew Burgess
Matthew Malcomson
Sergey Belyashov
Jon Turney
Nick Clifton
Andre Vieira
Jozef Lawrynowicz
Claudiu Zissulescu
Shahab Vahedi
Joel Brobecker
Jan Beulich
Mihail Ionescu