* config/tc-i386.c (output_insn): Mark cvtpi2ps and cvtpi2pd
with GNU_PROPERTY_X86_FEATURE_2_MMX.
* testsuite/gas/i386/i386.exp: Run property-3 and
x86-64-property-3.
* testsuite/gas/i386/property-3.d: New file.
* testsuite/gas/i386/property-3.s: Likewise.
* testsuite/gas/i386/x86-64-property-3.d: Likewise.
AMD ABM has 2 instructions: popcnt and lzcnt. ABM CPUID feature bit has
been reused for lzcnt and a POPCNT CPUID feature bit is added for popcnt
which used to be the part of SSE4.2. This patch removes CpuABM and adds
CpuPOPCNT. It changes ABM to enable both lzcnt and popcnt, changes SSE4.2
to also enable popcnt.
gas/
* config/tc-i386.c (cpu_arch): Add .popcnt.
* doc/c-i386.texi: Remove abm and .abm. Add popcnt and .popcnt.
Add a tab before @samp{.sse4a}.
opcodes/
* i386-gen.c (cpu_flag_init): Replace CpuABM with
CpuLZCNT|CpuPOPCNT. Add CpuPOPCNT to CPU_SSE4_2_FLAGS. Add
CPU_POPCNT_FLAGS.
(cpu_flags): Remove CpuABM. Add CpuPOPCNT.
* i386-opc.h (CpuABM): Removed.
(CpuPOPCNT): New.
(i386_cpu_flags): Remove cpuabm. Add cpupopcnt.
* i386-opc.tbl: Replace CpuABM|CpuSSE4_2 with CpuPOPCNT on
popcnt. Remove CpuABM from lzcnt.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
There's no need to have separate Cpu64 and CpuNo64 templates: There
already is special logic handling the attribute, and all that's needed
is rejecting 16-bit address registers in 64-bit mode. Suppress suffix
guessing and group all involved logic together, outside of suffix
processing (arguably it doesn't even belong in process_suffix()).
Also, since no AddrPrefixOpReg template permits any suffixes, move the
No_*Suf specifiers for them to a central place. Along with this drop
the no longer relevant NoRex64 from there.
Generally, the documentation doesn't allow for any explicit operands
to be specified with MONITOR/MWAIT. To permit the more legible
overriding of the address size via specifying operands, the option is
being retained even in Intel mode, but operand swapping is being
suppressed by this patch. This is both because it makes no sense here
(all of the operands are inputs) and because, as a result, old gcc
(prior to 4.8) actually expects it this way with -mintel-syntax (and
hence gets fixed by this change rather than, as claimed by a reply in
the bug report, broken).
Conversions which shrink element size and which have a memory source
can't be disambiguated between their 128- and 256-bit variants by
looking at the register operand. "operand size mismatch", however, is a
pretty misleading diagnostic. Generalize the logic introduced for
VFPCLASSP{S,D} such that, with suitable similar adjustments to the
respective templates, it'll cover these cases too.
For VCVTNEPS2BF16 also fold the two previously separate AVX512VL
templates to achieve the intended effect. This is then also accompanied
by a respective addition to the inval-avx512f testcase.
commit 7deea9aad8 changed nosse4 to include CpuSSE4a. But AMD SSE4a is
a superset of SSE3 and Intel SSE4 is a superset of SSSE3. Disable Intel
SSE4 shouldn't disable AMD SSE4a. This patch restores nosse4. It also
adds .sse4a and nosse4a.
gas/
* config/tc-i386.c (cpu_arch): Add .sse4a and nosse4a. Restore
nosse4.
* doc/c-i386.texi: Document sse4a and nosse4a.
opcodes/
* i386-gen.c (cpu_flag_init): Add CPU_ANY_SSE4A_FLAGS. Remove
CPU_ANY_SSE4_FLAGS.
For these to get treatment consistent with other operand size checking
the special logic shouldn't live in md_assemble(), but process_suffix().
And there's more logic involved than simply zapping the suffix.
Note however that MOVS[BW]* and MOVZ[BW]* still won't be fully
consistent, due to the objection to fold MOVS* templates just like was
done for MOVZ* in c07315e0c6 ("x86: allow suffix-less movzw and 64-bit
movzb").
Note further that it is against my own intentions to have MOVSX/MOVZX
silently default to a byte source in AT&T mode. This should happen only
when the destination register is a 16-bit one. In all other cases there
is an ambiguity, and the user should be warned. But it was explicitly
requested for this to be done in a way inconsistent with everything
else.
Note finally that the assembler change points out (and this patch fixes)
a wrong Intel syntax test introduced by bc31405ebb ("x86-64: Properly
encode and decode movsxd"): When source code specifies a 16-bit
destination register, disassembly expectations shouldn't have been to
find a 32-bit one.
Since we already suppress the prefix altogether when it's the default
one for the chosen addressing mode, let's do so also when instruction
prefix and override specified with the memory operand match. (Note that
insn prefix specified segment overrides never get discarded.)
For one both possible forms should be warned about. And then, to guard
against future surprises, qualify the original opcode check by excluding
VEX/EVEX-like templates.
Since PLT entry isn't needed for branch to local symbol, we can resolve
R_386_PLT32/R_X86_64_PLT32 relocation aganst local symbol to section,
similar to R_386_PC32/R_X86_64_PC32.
2020-02-13 Fangrui Song <maskray@google.com>
H.J. Lu <hongjiu.lu@intel.com>
PR gas/25551
* config/tc-i386.c (tc_i386_fix_adjustable): Don't check
BFD_RELOC_386_PLT32 nor BFD_RELOC_X86_64_PLT32.
* testsuite/gas/i386/i386.exp: Run relax-5 and x86-64-relax-4.
* testsuite/gas/i386/relax-5.d: New file.
* testsuite/gas/i386/relax-5.s: Likewise.
* testsuite/gas/i386/x86-64-relax-4.d: Likewise.
* testsuite/gas/i386/x86-64-relax-4.s: Likewise.
With AVX512VL disabled (e.g. when writing code for the Knights family
of processors) these insns aren't ambiguous when used with a memory
source, and hence should be accepted without suffix or operand size
specifier. When AVX512VL is enabled, to be consistent with this as
well as other ambiguous operand size handling it would seem better to
just warn about the ambiguity in AT&T mode, and still default to 512-bit
operands (on the assumption that the code may have been written without
AVX512VL in mind yet), but it was requested to leave AT&T syntax mode
alone here.
AMD and Intel differ in their handling of far indirect branches as well
as LFS/LGS/LSS: AMD CPUs ignore REX.W while Intel ones honors it. (Note
how the latter three were hybrids so far, while far branches were fully
AMD-like.)
Along the lines of be4c5e58bd ("x86: Always disallow double word suffix
with word general register") also adjust check_{byte,word}_reg(), to make
overall behavior consistent again in this regard.
The diagnostics issued by check_*_reg() are pretty AT&T-centric. Re-use
logic already used for SIMD memory operand size checking also for ones
where GPRs would alternatively also be allowed. (There's certainly room
for further improvement here.)
My previous patch introduced the use of a C99 feature. C99 standard is
not required for gas, so this feature should be removed.
Committed as obvious.
gas/ChangeLog:
2020-02-11 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-arm.c (vcx_handle_register_arguments): Remove `for`
loop initial declaration.
Here we implement the custom datapath extensions for MVE.
This required the following changes:
- Adding a new register argument type (that takes either an MVE vector or
a Neon S or D register).
- Adding two new immediate operands types (0-127 and 0-4095).
- Using the Neon type machinery to distinguish between instruction
types. This required the introduction of new neon shapes to account
for the coprocessor operands to these instructions.
- Adding a new disassembly character to `print_insn_cde` to handle the
new register types.
Specification can be found at
https://developer.arm.com/docs/ddi0607/latest
Successfully regression tested on arm-none-eabi, and arm-wince-pe.
gas/ChangeLog:
2020-02-10 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-arm.c (NEON_MAX_TYPE_ELS): Increment to account for
instructions that can have 5 arguments.
(enum operand_parse_code): Add new operands.
(parse_operands): Account for new operands.
(S5): New macro.
(enum neon_shape_el): Introduce P suffixes for coprocessor.
(neon_select_shape): Account for P suffix.
(LOW1): Move macro to global position.
(HI4): Move macro to global position.
(vcx_assign_vec_d): New.
(vcx_assign_vec_m): New.
(vcx_assign_vec_n): New.
(enum vcx_reg_type): New.
(vcx_get_reg_type): New.
(vcx_size_pos): New.
(vcx_vec_pos): New.
(vcx_handle_shape): New.
(vcx_ensure_register_in_range): New.
(vcx_handle_register_arguments): New.
(vcx_handle_insn_block): New.
(vcx_handle_common_checks): New.
(do_vcx1): New.
(do_vcx2): New.
(do_vcx3): New.
* testsuite/gas/arm/cde-missing-fp.d: New test.
* testsuite/gas/arm/cde-missing-fp.l: New test.
* testsuite/gas/arm/cde-missing-mve.d: New test.
* testsuite/gas/arm/cde-missing-mve.l: New test.
* testsuite/gas/arm/cde-mve-or-neon.d: New test.
* testsuite/gas/arm/cde-mve-or-neon.s: New test.
* testsuite/gas/arm/cde-mve.s: New test.
* testsuite/gas/arm/cde-warnings.l:
* testsuite/gas/arm/cde-warnings.s:
* testsuite/gas/arm/cde.d:
* testsuite/gas/arm/cde.s:
opcodes/ChangeLog:
2020-02-10 Matthew Malcomson <matthew.malcomson@arm.com>
* arm-dis.c (print_insn_cde): Define 'V' parse character.
(cde_opcodes): Add VCX* instructions.
This patch is part of a series that adds support for the Armv8.m
ARMv8.m Custom Datapath Extension to binutils.
This patch introduces the Custom Instructions Class 1/2/3 (Single/
Dual, Accumulator/Non-accumulator varianats) to the arm backend.
The following Custom Instructions are added: cx1, cx1a,
cx1d, cx1da, cx2, cx2a, cx2d, cx2da, cx3, cx3a, cx3d, cx3da.
Specification can be found at
https://developer.arm.com/docs/ddi0607/latest
This patch distinguishes between enabling CDE for different coprocessor
numbers by defining multiple architecture flags. This means that the
parsing of the architecture extension flags is kept entirely in the
existing code path.
We introduce a new IT block state to indicate the behaviour of these
instructions. This new state allows being used in an IT block or
outside an IT block, but does not allow the instruction to be used
inside a VPT block.
We need this since the CX*A instruction versions can be used in IT
blocks, but they aren't to have the conditional suffixes on them. Hence
we need to mark an instruction as allowed in either position.
We also need a new flag to objdump, in order to determine whether to
disassemble an instruction as CDE related or not.
Successfully regression tested on arm-none-eabi, and arm-wince-pe.
gas/ChangeLog:
2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com>
Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-arm.c (arm_ext_cde*): New feature sets for each
CDE coprocessor that can be enabled.
(enum pred_instruction_type): New pred type.
(BAD_NO_VPT): New error message.
(BAD_CDE): New error message.
(BAD_CDE_COPROC): New error message.
(enum operand_parse_code): Add new immediate operands.
(parse_operands): Account for new immediate operands.
(check_cde_operand): New.
(cde_coproc_enabled): New.
(cde_coproc_pos): New.
(cde_handle_coproc): New.
(cxn_handle_predication): New.
(do_custom_instruction_1): New.
(do_custom_instruction_2): New.
(do_custom_instruction_3): New.
(do_cx1): New.
(do_cx1a): New.
(do_cx1d): New.
(do_cx1da): New.
(do_cx2): New.
(do_cx2a): New.
(do_cx2d): New.
(do_cx2da): New.
(do_cx3): New.
(do_cx3a): New.
(do_cx3d): New.
(do_cx3da): New.
(handle_pred_state): Define new IT block behaviour.
(insns): Add newn CX*{,d}{,a} instructions.
(CDE_EXTENSIONS,armv8m_main_ext_table,armv8_1m_main_ext_table):
Define new cdecp extension strings.
* doc/c-arm.texi: Document new cdecp extension arguments.
* testsuite/gas/arm/cde-scalar.d: New test.
* testsuite/gas/arm/cde-scalar.s: New test.
* testsuite/gas/arm/cde-warnings.d: New test.
* testsuite/gas/arm/cde-warnings.l: New test.
* testsuite/gas/arm/cde-warnings.s: New test.
* testsuite/gas/arm/cde.d: New test.
* testsuite/gas/arm/cde.s: New test.
include/ChangeLog:
2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com>
Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/arm.h (ARM_EXT2_CDE): New extension macro.
(ARM_EXT2_CDE0): New extension macro.
(ARM_EXT2_CDE1): New extension macro.
(ARM_EXT2_CDE2): New extension macro.
(ARM_EXT2_CDE3): New extension macro.
(ARM_EXT2_CDE4): New extension macro.
(ARM_EXT2_CDE5): New extension macro.
(ARM_EXT2_CDE6): New extension macro.
(ARM_EXT2_CDE7): New extension macro.
opcodes/ChangeLog:
2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com>
Matthew Malcomson <matthew.malcomson@arm.com>
* arm-dis.c (struct cdeopcode32): New.
(CDE_OPCODE): New macro.
(cde_opcodes): New disassembly table.
(regnames): New option to table.
(cde_coprocs): New global variable.
(print_insn_cde): New
(print_insn_thumb32): Use print_insn_cde.
(parse_arm_disassembler_options): Parse coprocN args.
Commit d835a58baa disabled sysenter/sysenter in 64-bit mode by
default. By default, assembler should accept common, Intel64 only
and AMD64 ISAs since there are no conflicts.
gas/
PR gas/25516
* config/tc-i386.c (intel64): Renamed to ...
(isa64): This.
(match_template): Accept Intel64 only instruction by default.
(i386_displacement): Updated.
(md_parse_option): Updated.
* c-i386.texi: Update -mamd64/-mintel64 documentation.
* testsuite/gas/i386/i386.exp: Run x86-64-sysenter. Pass
-mamd64 to x86-64-sysenter-amd.
* testsuite/gas/i386/x86-64-sysenter.d: New file.
opcodes/
PR gas/25516
* i386-gen.c (opcode_modifiers): Replace AMD64 and Intel64
with ISA64.
* i386-opc.h (AMD64): Removed.
(Intel64): Likewose.
(AMD64): New.
(INTEL64): Likewise.
(INTEL64ONLY): Likewise.
(i386_opcode_modifier): Replace amd64 and intel64 with isa64.
* i386-opc.tbl (Amd64): New.
(Intel64): Likewise.
(Intel64Only): Likewise.
Replace AMD64 with Amd64. Update sysenter/sysenter with
Cpu64 and Intel64Only. Remove AMD64 from sysenter/sysenter.
* i386-tbl.h: Regenerated.
* config/obj-elf.c (obj_elf_change_section): Error for section
type, attr or entsize changes in assembly.
* testsuite/gas/elf/elf.exp: Pass -Z to gas for section5 test.
* testsuite/gas/elf/section5.l: Update.
PR 25469
bfd * archures.c: Add GBZ80 and Z80N machine values.
* reloc.c: Add BFD_RELOC_Z80_16_BE.
* coff-z80.c: Add support for new reloc.
* coffcode.h: Add support for new machine values.
* cpu-z80.c: Add support for new machine names.
* elf32-z80.c: Add support for new reloc.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
binutils* readelf.c (get_machine_flags): Add support for Z80N machine
number.
gas * config/tc-z80.c: Add -gbz80 command line option to generate code
for the GameBoy Z80. Add support for generating DWARF.
* config/tc-z80.h: Add support for DWARF debug information
generation.
* doc/c-z80.texi: Document new command line option.
* testsuite/gas/z80/gbz80_all.d: New file.
* testsuite/gas/z80/gbz80_all.s: New file.
* testsuite/gas/z80/z80.exp: Run the new tests.
* testsuite/gas/z80/z80n_all.d: New file.
* testsuite/gas/z80/z80n_all.s: New file.
* testsuite/gas/z80/z80n_reloc.d: New file.
include * coff/internal.h (R_IMM16BE): Define.
* elf/z80.h (EF_Z80_MACH_Z80N): Define.
(R_Z80_16_BE): New reloc.
ld * emulparams/elf32z80.sh: Use z80 emulation.
* emultempl/z80.em: Make generic to both COFF and ELF Z80 emulations.
* emultempl/z80elf.em: Delete.
* testsuite/ld-elf/pr22450.d: Expect to fail for the Z80.
* testsuite/ld-elf/sec64k.exp: Fix Z80 assembly.
* testsuite/ld-unique/pr21529.s: Avoid register name conflict.
* testsuite/ld-unique/unique.s: Likewise.
* testsuite/ld-unique/unique_empty.s: Likewise.
* testsuite/ld-unique/unique_shared.s: Likewise.
* testsuite/ld-unique/unique.d: Updated expected output.
* testsuite/ld-z80/arch_z80n.d: New file.
* testsuite/ld-z80/comb_arch_z80_z80n.d: New file.
* testsuite/ld-z80/labels.s: Add more labels.
* testsuite/ld-z80/relocs.s: Add more reloc tests.
* testsuite/ld-z80/relocs_f_z80n.d: New file
opcodes * z80-dis.c: Add support for GBZ80 opcodes.
As shown in
https://sourceware.org/bugzilla/show_bug.cgi?id=25490
--gc-sections will silently remove __patchable_function_entries section
and generate corrupt result. This patch adds the section flag 'o' to
.section directive:
.section __patchable_function_entries,"awo",@progbits,foo
.section __patchable_function_entries,"awoG",@progbits,foo,foo,comdat
.section __patchable_function_entries,"awo",@progbits,bar,unique,4
.section __patchable_function_entries,"awoG",@progbits,foo,foo,comdat,unique,1
which specifies the symbol name which the section references. Assmebler
will set its elf_linked_to_section to a local section where the symbol
is defined.
Linker is updated to call mark_hook if gc_mark of any of its linked-to
sections is set after all sections, except for backend specific ones,
have been garbage collected.
bfd/
PR gas/25381
* bfd-in2.h: Regenerated.
* elflink.c (_bfd_elf_gc_mark_extra_sections): Call mark_hook
on section if gc_mark of any of its linked-to sections is set
and don't set gc_mark again.
* section.c (asection): Add linked_to_symbol_name to map_head
union.
gas/
PR gas/25381
* config/obj-elf.c (get_section): Also check
linked_to_symbol_name.
(obj_elf_change_section): Also set map_head.linked_to_symbol_name.
(obj_elf_parse_section_letters): Handle the 'o' flag.
(build_group_lists): Renamed to ...
(build_additional_section_info): This. Set elf_linked_to_section
from map_head.linked_to_symbol_name.
(elf_adjust_symtab): Updated.
* config/obj-elf.h (elf_section_match): Add linked_to_symbol_name.
* doc/as.texi: Document the 'o' flag.
* testsuite/gas/elf/elf.exp: Run PR gas/25381 tests.
* testsuite/gas/elf/section18.d: New file.
* testsuite/gas/elf/section18.s: Likewise.
* testsuite/gas/elf/section19.d: Likewise.
* testsuite/gas/elf/section19.s: Likewise.
* testsuite/gas/elf/section20.d: Likewise.
* testsuite/gas/elf/section20.s: Likewise.
* testsuite/gas/elf/section21.d: Likewise.
* testsuite/gas/elf/section21.l: Likewise.
* testsuite/gas/elf/section21.s: Likewise.
ld/
PR ld/24526
PR ld/25021
PR ld/25490
* testsuite/ld-elf/elf.exp: Run PR ld/25490 tests.
* testsuite/ld-elf/pr24526.d: New file.
* testsuite/ld-elf/pr24526.s: Likewise.
* testsuite/ld-elf/pr25021.d: Likewise.
* testsuite/ld-elf/pr25021.s: Likewise.
* testsuite/ld-elf/pr25490-2-16.rd: Likewise.
* testsuite/ld-elf/pr25490-2-32.rd: Likewise.
* testsuite/ld-elf/pr25490-2-64.rd: Likewise.
* testsuite/ld-elf/pr25490-2.s: Likewise.
* testsuite/ld-elf/pr25490-3-16.rd: Likewise.
* testsuite/ld-elf/pr25490-3-32.rd: Likewise.
* testsuite/ld-elf/pr25490-3-64.rd: Likewise.
* testsuite/ld-elf/pr25490-3.s: Likewise.
* testsuite/ld-elf/pr25490-4-16.rd: Likewise.
* testsuite/ld-elf/pr25490-4-32.rd: Likewise.
* testsuite/ld-elf/pr25490-4-64.rd: Likewise.
* testsuite/ld-elf/pr25490-4.s: Likewise.
* testsuite/ld-elf/pr25490-5-16.rd: Likewise.
* testsuite/ld-elf/pr25490-5-32.rd: Likewise.
* testsuite/ld-elf/pr25490-5-64.rd: Likewise.
* testsuite/ld-elf/pr25490-5.s: Likewise.
* testsuite/ld-elf/pr25490-6-16.rd: Likewise.
* testsuite/ld-elf/pr25490-6-32.rd: Likewise.
* testsuite/ld-elf/pr25490-6-64.rd: Likewise.
* testsuite/ld-elf/pr25490-6.s: Likewise.
Clang's integrated assembler supports multiple section with the same
name:
.section .text,"ax",@progbits,unique,1
nop
.section .text,"ax",@progbits,unique,2
nop
"unique,N" assigns the number, N, as the section ID, to a section. The
valid values of the section ID are between 0 and 4294967295. It can be
used to distinguish different sections with the same section name.
This is useful with -fno-unique-section-names -ffunction-sections.
-ffunction-sections by default generates .text.foo, .text.bar, etc.
Using the same string can save lots of space in .strtab.
This patch adds section_id to bfd_section and reuses the linker
internal bit in BFD section flags, SEC_LINKER_CREATED, for assmebler
internal use to mark valid section_id. It also updates objdump to
compare section pointers if 2 sections comes from the same file since
2 different sections can have the same section name.
bfd/
PR gas/25380
* bfd-in2.h: Regenerated.
* ecoff.c (bfd_debug_section): Add section_id.
* section.c (bfd_section): Add section_id.
(SEC_ASSEMBLER_SECTION_ID): New.
(BFD_FAKE_SECTION): Add section_id.
binutils/
PR gas/25380
* objdump.c (sym_ok): Return FALSE if 2 sections are in the
same file with different section pointers.
gas/
PR gas/25380
* config/obj-elf.c (section_match): Removed.
(get_section): Also match SEC_ASSEMBLER_SECTION_ID and
section_id.
(obj_elf_change_section): Replace info and group_name arguments
with match_p. Also update the section ID and flags from match_p.
(obj_elf_section): Handle "unique,N". Update call to
obj_elf_change_section.
* config/obj-elf.h (elf_section_match): New.
(obj_elf_change_section): Updated.
* config/tc-arm.c (start_unwind_section): Update call to
obj_elf_change_section.
* config/tc-ia64.c (obj_elf_vms_common): Likewise.
* config/tc-microblaze.c (microblaze_s_data): Likewise.
(microblaze_s_sdata): Likewise.
(microblaze_s_rdata): Likewise.
(microblaze_s_bss): Likewise.
* config/tc-mips.c (s_change_section): Likewise.
* config/tc-msp430.c (msp430_profiler): Likewise.
* config/tc-rx.c (parse_rx_section): Likewise.
* config/tc-tic6x.c (tic6x_start_unwind_section): Likewise.
* doc/as.texi: Document "unique,N" in .section directive.
* testsuite/gas/elf/elf.exp: Run "unique,N" tests.
* testsuite/gas/elf/section15.d: New file.
* testsuite/gas/elf/section15.s: Likewise.
* testsuite/gas/elf/section16.s: Likewise.
* testsuite/gas/elf/section16a.d: Likewise.
* testsuite/gas/elf/section16b.d: Likewise.
* testsuite/gas/elf/section17.d: Likewise.
* testsuite/gas/elf/section17.l: Likewise.
* testsuite/gas/elf/section17.s: Likewise.
* testsuite/gas/i386/unique.d: Likewise.
* testsuite/gas/i386/unique.s: Likewise.
* testsuite/gas/i386/x86-64-unique.d: Likewise.
* testsuite/gas/i386/i386.exp: Run unique and x86-64-unique.
ld/
PR gas/25380
* testsuite/ld-i386/pr22001-1c.S: Use "unique,N" in .section
directives.
* testsuite/ld-i386/tls-gd1.S: Likewise.
* testsuite/ld-x86-64/pr21481b.S: Likewise.
The nios2 ABI documentation lists %gotoff as assembler syntax for the
R_NIOS2_GOTOFF relocation, used to represent a 32-bit GOT-relative offset
in data sections. This was previously unimplemented in GAS.
2020-01-31 Sandra Loosemore <sandra@codesourcery.com>
gas/
* config/tc-nios2.c (nios2_cons): Handle %gotoff as well as
%tls_ldo.
We noticed +mve was not enabling DSP instructions as it should, reported in PR
25472.
The MVE architecture extension for Armv8.1-M Mainline implies DSP extensions.
This patch reflects that in the '+mve' command line option.
gas/ChangeLog:
2020-01-31 Andre Vieira <andre.simoesdiasvieira@arm.com>
PR gas/25472
* config/tc-arm.c (armv8m_main_ext_table): Refactored +dsp adding.
(armv8_1m_main_ext_table): Refactored +dsp adding and enabled dsp for
+mve.
* testsuite/gas/arm/mve_dsp.d: New test.
This patch adds support for assembly instructions vldmia, vldmdb, vstmia
and vstmdb in MVE. This instructions are already supported for Armv8-M
Floating-point Extension.
gas/ChangeLog:
2020-01-31 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
* config/tc-arm.c (fldmias): Moved inside "THUMB_VARIANT & arm_ext_v6t2"
to support VLDMIA instruction for MVE.
(fldmdbs): Moved inside "THUMB_VARIANT & arm_ext_v6t2" to support VLDMDB
instruction for MVE.
(fstmias): Moved inside "THUMB_VARIANT & arm_ext_v6t2" to support VSTMIA
instruction for MVE.
(fstmdbs): Moved inside "THUMB_VARIANT & arm_ext_v6t2" to support VSTMDB
instruction for MVE.
* testsuite/gas/arm/mve-ldst.d: New test.
* testsuite/gas/arm/mve-ldst.s: Likewise.
Comparison of i.tm.base_opcode against particular but not sufficiently
specific values needs to be accompanied by other qualification. Exclude
VEX and alike encodings here, and also exclude all forms of prefixes
explicitly specified in the opcodes table. While using @GOT with such
insns may not be very useful, it also isn't with e.g. ADC and SBB, yet
these get explicitly listed in comments as supported.
Other than near returns these default to 32-bit operand size, and hence
it isn't really unlikely that 64-bit forms are meant. Hence these should
have disambiguating suffixes. In Intel mode, however, don't error in
these cases unconditionally - MASM accepts these without suffix _and_
without warning.
- 64-bit CALL permitting just a single operand size doesn't need it.
- FLDENV et al should never have had it.
It remains suspicious that a number of 64-bit only insns continue to
have the attribute, despite this being intended for .code16gcc handling
only.
movsxd is a 64-bit only instruction. It supports both 16-bit and 32-bit
destination registers. Its AT&T mnemonic is movslq which only supports
64-bit destination register. There is also a discrepancy between AMD64
and Intel64 on movsxd with 16-bit destination register. AMD64 supports
32-bit source operand and Intel64 supports 16-bit source operand.
This patch updates movsxd encoding and decoding to alow 16-bit and 32-bit
destination registers. It also handles movsxd with 16-bit destination
register for AMD64 and Intel 64.
gas/
PR binutils/25445
* config/tc-i386.c (check_long_reg): Also convert to QWORD for
movsxd.
* doc/c-i386.texi: Add a node for AMD64 vs. Intel64 ISA
differences. Document movslq and movsxd.
* testsuite/gas/i386/i386.exp: Run PR binutils/25445 tests.
* testsuite/gas/i386/x86-64-movsxd-intel.d: New file.
* testsuite/gas/i386/x86-64-movsxd-intel64-intel.d: Likewise.
* testsuite/gas/i386/x86-64-movsxd-intel64-inval.l: Likewise.
* testsuite/gas/i386/x86-64-movsxd-intel64-inval.s: Likewise.
* testsuite/gas/i386/x86-64-movsxd-intel64.d: Likewise.
* testsuite/gas/i386/x86-64-movsxd-intel64.s: Likewise.
* testsuite/gas/i386/x86-64-movsxd-inval.l: Likewise.
* testsuite/gas/i386/x86-64-movsxd-inval.s: Likewise.
* testsuite/gas/i386/x86-64-movsxd.d: Likewise.
* testsuite/gas/i386/x86-64-movsxd.s: Likewise.
opcodes/
PR binutils/25445
* i386-dis.c (MOVSXD_Fixup): New function.
(movsxd_mode): New enum.
(x86_64_table): Use MOVSXD_Fixup and movsxd_mode on movsxd.
(intel_operand_size): Handle movsxd_mode.
(OP_E_register): Likewise.
(OP_G): Likewise.
* i386-opc.tbl: Remove Rex64 and allow 32-bit destination
register on movsxd. Add movsxd with 16-bit destination register
for AMD64 and Intel64 ISAs.
* i386-tbl.h: Regenerated.
In 64-bit mode, double word suffix in mnemonic with word general register
is disallowed. Otherwise, assembler gives a warning:
$ cat /tmp/x.s
movl %ax, %bx
movl %ds, %ax
movl %ax, %cs
$ gcc -c /tmp/x.s
/tmp/x.s: Assembler messages:
/tmp/x.s:1: Error: incorrect register `%bx' used with `l' suffix
/tmp/x.s:2: Error: incorrect register `%ax' used with `l' suffix
/tmp/x.s:3: Error: incorrect register `%ax' used with `l' suffix
$ gcc -c /tmp/x.s -m32
/tmp/x.s: Assembler messages:
/tmp/x.s: Assembler messages:
/tmp/x.s:1: Warning: using `%ebx' instead of `%bx' due to `l' suffix
/tmp/x.s:1: Warning: using `%eax' instead of `%ax' due to `l' suffix
/tmp/x.s:2: Warning: using `%eax' instead of `%ax' due to `l' suffix
/tmp/x.s:3: Warning: using `%eax' instead of `%ax' due to `l' suffix
This patch makes it a hard error in all modes. Now we get:
$ gcc -c /tmp/x.s -m32
/tmp/x.s: Assembler messages:
/tmp/x.s:1: Error: incorrect register `%bx' used with `l' suffix
/tmp/x.s:2: Error: incorrect register `%ax' used with `l' suffix
/tmp/x.s:3: Error: incorrect register `%ax' used with `l' suffix
PR gas/25438
* config/tc-i386.c (check_long_reg): Always disallow double word
suffix in mnemonic with word general register.
* testsuite/gas/i386/general.s: Replace word general register
with double word general register for movl.
* testsuite/gas/i386/inval.s: Add tests for movl with word general
register.
* testsuite/gas/i386/general.l: Updated.
* testsuite/gas/i386/inval.l: Likewise.
This implements register saving and restoring in the __tls_get_addr
call stub, so that when glibc supports the optimized tls call stub gcc
can generate code that assumes only r0, r12 and of course r3 are
changed on a __tls_get_addr call. When gcc expects __tls_get_addr
calls to preserve registers the call will be to __tls_get_addr_desc,
which will be translated by the linker to a call to __tls_get_addr_opt.
bfd/
* elf64-ppc.h (struct ppc64_elf_params): Add no_tls_get_addr_regsave.
* elf64-ppc.c (struct ppc_link_hash_table): Add tga_desc and
tga_desc_fd.
(is_tls_get_addr): Match tga_desc and tga_desc_df too.
(STDU_R1_0R1, ADDI_R1_R1): Define.
(tls_get_addr_prologue, tls_get_addr_epilogue): New functions.
(ppc64_elf_tls_setup): Set up tga_desc and tga_desc_fd. Indirect
tga_desc_fd to opt_fd, and tga_desc to opt. Set
no_tls_get_addr_regsave.
(branch_reloc_hash_match): Add hash3 and hash4.
(ppc64_elf_tls_optimize): Handle tga_desc_fd and tga_desc too.
(ppc64_elf_size_dynamic_sections): Likewise.
(ppc64_elf_relocate_section): Likewise.
(plt_stub_size, build_plt_stub): Likewise. Size regsave
__tls_get_addr stub.
(build_tls_get_addr_stub): Build regsave __tls_get_addr stub and
eh_frame.
(ppc_size_one_stub): Handle tga_desc_fd and tga_desc too. Size
eh_frame for regsave __tls_get_addr.
gas/
* config/tc-ppc.c (parse_tls_arg): Handle tls arg for
__tls_get_addr_desc and __tls_get_addr_opt.
ld/
* emultempl/ppc64elf.em (ppc64_opt, PARSE_AND_LIST_LONGOPTS),
(PARSE_AND_LIST_OPTIONS, PARSE_AND_LIST_ARGS_CASES): Support
--tls-get-addr-regsave and --no-tls-get-addr-regsave.
(params): Init new field.
* ld.texi (--tls-get-addr-regsave, --no-tls-get-addr-regsave):
Document.
* testsuite/ld-powerpc/tlsdesc.s,
* testsuite/ld-powerpc/tlsdesc.d,
* testsuite/ld-powerpc/tlsdesc.wf,
* testsuite/ld-powerpc/tlsdesc2.d,
* testsuite/ld-powerpc/tlsdesc2.wf,
* testsuite/ld-powerpc/tlsexenors.d,
* testsuite/ld-powerpc/tlsexenors.r,
* testsuite/ld-powerpc/tlsexers.d,
* testsuite/ld-powerpc/tlsexers.r,
* testsuite/ld-powerpc/tlsexetocnors.d,
* testsuite/ld-powerpc/tlsexetocrs.d,
* testsuite/ld-powerpc/tlsexetocrs.r,
* testsuite/ld-powerpc/tlsopt6.d,
* testsuite/ld-powerpc/tlsopt6.wf: New.
* testsuite/ld-powerpc/powerpc.exp: Run new tests.
There's no need (anymore?) to heavily special case this - just make
generic logic consider only its first operand, and deal with the case
of an 'l' suffix not being allowed in a pattern.
Commit b76bc5d54e ("x86: don't default variable shift count insns to
8-bit operand size") pointed out a very bad case, but the underlying
problem is, as mentioned on various occasions, much larger: Silently
selecting a (nowhere documented afaict) certain default operand size
when there's no "sizing" suffix and no suitable register operand(s) is
simply dangerous (for the programmer to make mistakes).
While in Intel syntax mode such mistakes already lead to an error (which
is going to remain that way), AT&T syntax mode now gains warnings in
such cases by default, which can be suppressed or promoted to an error
if so desired by the programmer. Furthermore at least general purpose
insns now consistently have a default applied (alongside the warning
emission), rather than accepting some and refusing others.
No warnings are (as before) to be generated for "DefaultSize" insns as
well as ones acting on selector and other fixed-width values. For
SYSRET, however, the DefaultSize needs to be dropped - it had been
wrongly put there in the first place, as it's unrelated to .code16gcc
(no stack accesses involved).
As set forth as a prereq when I first mentioned this intended change a
few years back, Linux as well as gcc have meanwhile been patched to
avoid (emission of) ambiguous operands (and hence triggering of the new
warning).
Note that I think that in 64-bit mode IRET and far RET would better get
a diagnostic too, as it's reasonably likely that a suffix-less instance
really is meant to be a 64-bit one. But I guess I better make this a
separate follow-on patch.
Note further that floating point operations with integer operands are an
exception for now: They continue to use short (16-bit) operands by
default even in 32- and 64-bit modes.
Finally note that while {,V}PCMPESTR{I,M} would, strictly speaking, also
need to be diagnosed, with their 64-bit forms not being very useful I
think it is better to continue to avoid warning about them (by way of
them carrying IgnoreSize attributes).
This patch moves MVE feature bits into the CORE_HIGH section. This makes sure
.fpu and -mfpu does not reset the bits set by MVE. This is important because
.fpu has no option to "set" these same bits and thus, mimic'ing GCC, we choose
to define MVE as an architecture extension rather than put it together with
other the legacy fpu features.
This will enable the following behavior:
.arch armv8.1-m.main
.arch mve
.fpu fpv5-sp-d16 #does not disable mve.
vadd.i32 q0, q1, q2
This patch also makes sure MVE is not taken into account during auto-detect.
This was already the case, but because we moved the MVE bits to the
architecture feature space we must make sure ARM_ANY does not include MVE.
gas/ChangeLog:
2020-01-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
PR 25376
* config/tc-arm.c (mve_ext, mve_fp_ext): Use CORE_HIGH.
(armv8_1m_main_ext_table): Use CORE_HIGH for mve.
* testsuite/arm/armv8_1-m-fpu-mve-1.s: New.
* testsuite/arm/armv8_1-m-fpu-mve-1.d: New.
* testsuite/arm/armv8_1-m-fpu-mve-2.s: New.
* testsuite/arm/armv8_1-m-fpu-mve-2.d: New.
include/ChangeLog:
2020-01-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
PR 25376
* opcodes/arm.h (FPU_MVE, FPU_MVE_FPU): Move these features to...
(ARM_EXT2_MVE, ARM_EXT2_MVE_FP): ... the CORE_HIGH space.
(ARM_ANY): Redefine to not include any MVE bits.
(ARM_FEATURE_ALL): Removed.
opcodes/ChangeLog:
2020-01-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
PR 25376
* opcodes/arm-dis.c (coprocessor_opcodes): Use CORE_HIGH for MVE bits.
(neon_opcodes): Likewise.
(select_arm_features): Make sure we enable MVE bits when selecting
armv8.1-m.main. Make sure we do not enable MVE bits when not selecting
any architecture.
gas/ChangeLog:
2020-01-15 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/tc-msp430.c (CHECK_RELOC_MSP430): Always generate 430X
relocations when the target is 430X, except when extracting part of an
expression.
(msp430_srcoperand): Adjust comment.
Initialize the expp member of the msp430_operand_s struct as
appropriate.
(msp430_dstoperand): Likewise.
* testsuite/gas/msp430/msp430.exp: Run new test.
* testsuite/gas/msp430/reloc-lo-430x.d: New test.
* testsuite/gas/msp430/reloc-lo-430x.s: New test.
include/ChangeLog:
2020-01-15 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* opcode/msp430.h (enum msp430_expp_e): New.
(struct msp430_operand_s): Add expp member to struct.
ld/ChangeLog:
2020-01-15 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new test.
* testsuite/ld-msp430-elf/reloc-lo-430x.s: New test.
PR 25377
gas * config/tc-z80.c: Add support for half precision, single
precision and double precision floating point values.
* config/tc-z80.h b/gas/config/tc-z80.h: Disable string escapes.
* doc/as.texi: Add new z80 command line options.
* doc/c-z80.texi: Document new z80 command line options.
* testsuite/gas/z80/ez80_pref_dis.s: New test.
* testsuite/gas/z80/ez80_pref_dis.d: New test driver.
* testsuite/gas/z80/z80.exp: Run the new test.
* testsuite/gas/z80/fp_math48.d: Use correct command line option.
* testsuite/gas/z80/fp_zeda32.d: Likewise.
* testsuite/gas/z80/strings.d: Update expected output.
opcodes * z80-dis.c (suffix): Use .db instruction to generate double
prefix.
There are no instructions under these matrix multiply extensions that
can be used without having SVE enabled.
Since these extensions require SVE, we make that explicit in the options
table.
Tested on aarch64-none-elf without regressions.
gas/ChangeLog:
2020-01-13 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (f64mm, f32mm): Add sve as a feature
dependency.
Don't do that. Especially don't use shift counts that assume the type
being shifted is 32 bits when the type is long/unsigned long. Also
reverts part of a change I made on 2019-12-11 to tic4x_print_register
that on closer inspection turns out to be unnecessary.
include/
* opcode/tic4x.h (EXTR): Delete.
(EXTRU, EXTRS, INSERTU, INSERTS): Rewrite without zero/sign
extension using shifts. Do trim INSERTU value to specified bitfield.
opcodes/
* tic4x-dis.c (tic4x_print_register): Remove dead code.
gas/
* config/tc-tic4x.c (tic4x_operands_match): Correct tic3x trap
insertion.
Checking just the base opcode without also checking this isn't a VEX
encoding, and without there being other insn properties avoiding a match
once respective VEX/XOP/EXEX-encoded insns would appear, is at least
dangerous. Add respective checks. At the same time there's no real need
to check the extension opcode to be None for the 0xA8 form - there's
nothing it can be confused with, and non-VEX-and-alike forms also can't
appear.
Sergey Belyashov
H.J. Lu
Jan Beulich
Matthew Malcomson
Alan Modra
Gitea
Sandra Loosemore
Andre Vieira
Nick Clifton
Srinath Parvathaneni
Jozef Lawrynowicz
Claudiu Zissulescu