This is the first patch of a series to implement support for the
PowerPC ELFv2 ABI. While powerpc64le-linux will use ELFv2, and
the existing powerpc64-linux code will continue to use ELFv1,
in theory ELFv2 is also defined for big-endian systems (and
ELFv1 was also defined for little-endian systems).
Therefore this patch adds a new tdep->elf_abi variable to decide
which ABI version to use. This is detected from the ELF header
e_flags value; if this is not present, we default to ELFv2 on
little-endian and ELFv1 otherwise.
This patch does not yet introduce any actual difference in GDB's
handling of the two ABIs. Those will be added by the remainder
of this patch series.
For an overview of the changes in ELFv2, have a look at the
comments in the patch series that added ELFv2 to GCC, starting at:
http://gcc.gnu.org/ml/gcc-patches/2013-11/msg01144.html
gdb/ChangeLog:
* ppc-tdep.h (enum powerpc_elf_abi): New data type.
(struct gdbarch_tdep): New member elf_abi.
* rs6000-tdep.c: Include "elf/ppc64.h".
(rs6000_gdbarch_init): Detect ELF ABI version.
The powerpc64le-linux ABI specifies that when a 128-bit DFP value is
passed in a pair of floating-point registers, the first register holds
the most-significant part of the value. This is as opposed to the
usual rule on little-endian systems, where the first register would
hold the least-significant part.
This affects two places in GDB, the read/write routines for the
128-bit DFP pseudo-registers, and the function call / return
sequence. For the former, current code already distinguishes
between big- and little-endian targets, but gets the latter
wrong. This is presumably because *GCC* also got it wrong,
and GDB matches the old GCC behavior. But GCC is now fixed:
http://gcc.gnu.org/ml/gcc-patches/2013-11/msg02145.html
so GDB needs to be fixed too. (Old code shouldn't really be
an issue since there is no code "out there" so far that uses
dfp128 on little-endian ...)
gdb/ChangeLog:
* ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct order
within a register pair holding a DFP 128-bit value on little-endian.
(ppc64_sysv_abi_return_value_base): Likewise.
* rs6000-tdep.c (dfp_pseudo_register_read): Likewise.
(dfp_pseudo_register_write): Likewise.
gdb/testsuite/ChangeLog:
* gdb.arch/powerpc-d128-regs.exp: Enable on powerpc64*-*.
Many VSX test were failing on powerpc64le-linux, since -as opposed to the
AltiVec tests- there never were little-endian versions of the test patterns.
This patch adds such patterns, along the lines of altivec-regs.exp.
In addition, there is an actual code change required: For those VSX
registers that overlap a floating-point register, the FP register
overlaps the most-significant half of the VSX register both on big-
and little-endian systems. However, on little-endian systems, that
half is stored at an offset of 8 bytes (not 0). This works already
for the "real" FP registers, but current code gets it wrong for
the "extended" pseudo FP register GDB generates for the second
half of the VSX register bank.
This patch updates the corresponding pseudo read/write routines
to take the appropriate offset into consideration.
gdb/ChangeLog:
* rs6000-tdep.c (efpr_pseudo_register_read): Use correct offset
of the overlapped FP register within the VSX register on little-
endian platforms.
(efpr_pseudo_register_write): Likewise.
gdb/testsuite/ChangeLog:
* gdb.arch/vsx-regs.exp: Check target endianness. Provide variants
of the test patterns for use on little-endian systems.
This removes XCALLOC and replaces it either with XCNEWVEC, or, if the
number of elements being requested was 1, with XCNEW.
2014-01-13 Tom Tromey <tromey@redhat.com>
* defs.h (XCALLOC): Remove.
* bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
(print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
* dwarf2loc.c (allocate_piece_closure): Likewise.
* elfread.c (elf_symfile_segments): Likewise.
(elf_symfile_segments): Likewise.
* gdbtypes.c (copy_type_recursive): Likewise.
* i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
* jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
* minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
XCALLOC.
* mt-tdep.c (mt_gdbarch_init): Likewise.
* opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
XCALLOC.
* psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
* regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
* registry.c (registry_alloc_data): Likewise.
* rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* serial.c (serial_fdopen_ops): Likewise.
* solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
XCALLOC.
* spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
* symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
not XCALLOC.
ELFv2 needs different plt call stubs to ELFv1, register usage differs
too. When I added these to ld I changed register usage in the ELFv1
stubs as well, simplifying the linker code and (perhaps) future
maintenance. All well and good, but this means gdb needs to cope with
more stub variants. This patch also handles skipping over addis/addi
setting up r2 in ELFv2 global entry code. We want breakpoints to be
set past this point to catch calls via the local entry point.
* ppc64-tdep.c (ppc64_plt_entry_point): Renamed from..
(ppc64_desc_entry_point): ..this. Update comments here and at
call points.
(ppc64_standard_linkage1, ppc64_standard_linkage2,
ppc64_standard_linkage3): Update comments.
(ppc64_standard_linkage4, ppc64_standard_linkage5,
(ppc64_standard_linkage6, ppc64_standard_linkage7): New insn
patterns.
(ppc64_standard_linkage4_target): New function.
(ppc64_skip_trampoline_code): Skip ELFv2 patterns too.
* rs6000-tdep.c (skip_prologue): Skip ELFv2 r2 setup. Correct
nop match. Fix comment wrap.
This adds -Wold-style-declaration to gdb's list of warnings.
It turns out that a few places use "const static" rather than
"static const". The former is deprecated according to the C standard.
Tested by rebuilding with --enable-targets=all on x86-64 Fedora 18.
* configure.ac (build_warnings): Add -Wold-style-declaration.
* configure: Rebuild.
* dsrec.c (make_srec): Use "static const", not "const static".
* h8300-tdep.c (h8300_breakpoint_from_pc): Use "static const",
not "const static".
* mi/mi-parse.c (mi_no_values, mi_simple_values, mi_all_values):
Use "static const", not "const static".
* mn10300-tdep.c (mn10300_breakpoint_from_pc): Use "static const",
not "const static".
* moxie-tdep.c (moxie_breakpoint_from_pc): Use "static const",
not "const static".
* rs6000-tdep.c (rs6000_breakpoint_from_pc): Use "static const",
not "const static".
* v850-tdep.c (v850_breakpoint_from_pc): Use "static const",
not "const static".
(v850_dbtrap_breakpoint_from_pc): Likewise.
* xstormy16-tdep.c (xstormy16_breakpoint_from_pc): Use "static const",
not "const static".
* rs6000-tdep.c (read_insn): Add frame param, don't assume big-endian.
(ppc_insns_match_pattern): Add frame param. Avoid multiple
target mem reads on optional insns.
* ppc-linux-tdep.c (ppc_skip_trampoline_code): Update
ppc_insns_match_pattern calls.
* ppc64-tdep.c (ppc64_standard_linkage2, ppc64_standard_linkage3):
Add match for power7 thread safety insns, and new order of
std 2,40(1) insn. Correct code shown for _dl_runtime_resolve
invocation in comment, and update rest of comment.
(PPC64_STANDARD_LINKAGE1_LEN, PPC64_STANDARD_LINKAGE2_LEN,
PPC64_STANDARD_LINKAGE3_LEN): Delete.
(ppc64_standard_linkage2_target): Update insn offsets.
(ppc64_skip_trampoline_code): Use a single insn buffer. Match newer
stubs first. Update calls.
* Makefile.in (ALL_TARGET_OBS): Add ppc64-tdep.o.
(HFILES_NO_SRCDIR): Add ppc64-tdep.h.
(ALLDEPFILES): Add ppc64-tdep.c.
* configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
ppc64-tdep.o to gdb_target_obs.
* ppc64-tdep.h: New file.
* ppc64-tdep.c: New file.
(insn_d, insn_ds, insn_xfx, ppc64_desc_entry_point): Move from
ppc-linux-tdep.c to here.
(PPC64_STANDARD_LINKAGE1_LEN, PPC64_STANDARD_LINKAGE2_LEN)
(PPC64_STANDARD_LINKAGE2_LEN): Likewise and use ARRAY_SIZE macro.
(ppc64_standard_linkage1_target, ppc64_standard_linkage2_target)
(ppc64_standard_linkage3_target, ppc64_skip_trampoline_code): Move
from ppc-linux-tdep.c to here.
(ppc64_convert_from_func_ptr_addr): Rename from
ppc64_linux_convert_from_func_ptr_addr to
ppc64_convert_from_func_ptr_addr and move from ppc-linux-tdep.c to
here.
* rs6000-tdep.c:
(read_insn): Move from ppc-linux-tdep.c to here.
(insns_match_pattern, insn_d_field, insn_ds_field): Move
from ppc-linux-tdep.c to here and rename them with the ppc_ prefix.
* ppc-linux-tdep.c: Include ppc64-tdep.h.
Removed above functions.
(ppc_linux_init_abi): Adjust.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
* frame.c (frame_unwind_register): Throw an error if unwinding the
register failed.
* get_prev_frame_1 (get_prev_frame_1): Ask the unwinder if there's
an unwind stop reason.
(frame_stop_reason_string): Handle UNWIND_UNAVAILABLE.
* frame.h (enum unwind_stop_reason) <UNWIND_OUTERMOST,
UNWIND_UNAVAILABLE>: New.
* inline-frame.c (inline_frame_unwind): Install
default_frame_unwind_stop_reason.
* frame-unwind.c: Include "exceptions.h".
(frame_unwind_find_by_frame): Swallow NOT_AVAILABLE_ERROR errors.
(default_frame_unwind_stop_reason): New.
* frame-unwind.h (frame_unwind_stop_reason_ftype): New typedef.
(default_frame_unwind_stop_reason): Declare.
(struct frame_unwind) <stop_reason>: New function pointer.
* dummy-frame.c: Install default_frame_unwind_stop_reason.
* dwarf2-frame.c: Include exceptions.h.
(struct dwarf2_frame_cache) <unavailable_retaddr>: New field.
(dwarf2_frame_cache): Swallow NOT_AVAILABLE_ERROR errors when
computing the CFA. If such an error was thrown, set
unavailable_retaddr.
(dwarf2_frame_unwind_stop_reason): New.
(dwarf2_frame_this_id): Don't build a frame id if the CFA was
unavailable.
(dwarf2_frame_unwind): Install dwarf2_frame_unwind_stop_reason.
(dwarf2_signal_frame_unwind): Ditto.
* amd64-tdep.c: Include "exceptions.h".
(struct amd64_frame_cache): New field "base_p".
(amd64_init_frame_cache): Clear it.
(amd64_frame_cache_1): New, factored out from amd64_frame_cache.
Avoid reading registers with functions that throw if the register
is not necessary to compute the frame base.
(amd64_frame_cache): Reimplement wrapping amd64_frame_cache_1, and
swallowing NOT_AVAILABLE_ERROR.
(amd64_frame_unwind_stop_reason): New.
(amd64_frame_this_id): Don't build a frame id if the frame base
was unavailable.
(amd64_frame_unwind): Install amd64_frame_unwind_stop_reason.
(amd64_sigtramp_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set
base_p if the frame base was computable.
(amd64_sigtramp_frame_unwind_stop_reason): New.
(amd64_sigtramp_frame_this_id): Don't build a frame id if the
frame base was unavailable.
(amd64_sigtramp_frame_unwind): Install
amd64_sigtramp_frame_unwind_stop_reason.
(amd64_epilogue_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set
base_p if the frame base was computable.
(amd64_epilogue_frame_unwind_stop_reason): New.
(amd64_epilogue_frame_this_id): Don't build a frame id if the
frame base was unavailable.
(amd64_epilogue_frame_unwind): Install
amd64_epilogue_frame_unwind_stop_reason.
* i386-tdep.c: Include "exceptions.h".
(struct i386_frame_cache): New field "base_p".
(i386_init_frame_cache): Clear it.
(i386_frame_cache_1): New, factored out from amd64_frame_cache.
Avoid reading registers with functions that throw if the register
is not necessary to compute the frame base.
(i386_frame_cache): Reimplement wrapping amd64_frame_cache_1, and
swallowing NOT_AVAILABLE_ERROR.
(i386_frame_unwind_stop_reason): New.
(i386_frame_this_id): Don't build a frame id if the frame base was
unavailable.
(i386_frame_prev_register): Handle unavailable SP.
(i386_frame_unwind): Install i386_frame_unwind_stop_reason.
(i386_epilogue_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set
base_p if the frame base was computable.
(i386_epilogue_frame_unwind_stop_reason): New.
(i386_epilogue_frame_this_id): Don't build a frame id if the frame
base was unavailable.
(i386_epilogue_frame_unwind): Install
i386_epilogue_frame_unwind_stop_reason.
(i386_sigtramp_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set
base_p if the frame base was computable.
(i386_sigtramp_frame_unwind_stop_reason): New.
(i386_sigtramp_frame_this_id): Don't build a frame id if the frame
base was unavailable.
(i386_sigtramp_frame_unwind): Install
i386_sigtramp_frame_unwind_stop_reason.
* sentinel-frame.c (sentinel_frame_prev_register): Use the value
type's size, not the register's.
(sentinel_frame_unwind): Install default_frame_unwind_stop_reason.
* alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind): Install
default_frame_unwind_stop_reason.
* alpha-tdep.c (alpha_sigtramp_frame_unwind)
(alpha_heuristic_frame_unwind): Ditto.
* amd64obsd-tdep.c (amd64obsd_trapframe_unwind): Ditto.
* arm-tdep.c (arm_prologue_unwind, arm_stub_unwind): Ditto.
* avr-tdep.c (avr_frame_unwind): Ditto.
* cris-tdep.c (cris_sigtramp_frame_unwind, cris_frame_unwind):
Ditto.
* frv-linux-tdep.c (frv_linux_sigtramp_frame_unwind): Ditto.
* frv-tdep.c (frv_frame_unwind): Ditto.
* h8300-tdep.c (h8300_frame_unwind): Ditto.
* hppa-hpux-tdep.c (hppa_hpux_sigtramp_frame_unwind): Ditto.
* hppa-linux-tdep.c (hppa_linux_sigtramp_frame_unwind): Ditto.
* hppa-tdep.c (hppa_frame_unwind, hppa_fallback_frame_unwind)
(hppa_stub_frame_unwind): Ditto.
* i386obsd-tdep.c (i386obsd_trapframe_unwind): Ditto.
* ia64-tdep.c (ia64_frame_unwind, ia64_sigtramp_frame_unwind)
(ia64_libunwind_frame_unwind)
(ia64_libunwind_sigtramp_frame_unwind): Ditto.
* iq2000-tdep.c (iq2000_frame_unwind): Ditto.
* lm32-tdep.c (lm32_frame_unwind): Ditto.
* m32c-tdep.c (m32c_unwind): Ditto.
* m32r-linux-tdep.c (m32r_linux_sigtramp_frame_unwind): Ditto.
* m32r-tdep.c (m32r_frame_unwind): Ditto.
* m68hc11-tdep.c (m68hc11_frame_unwind): Ditto.
* m68k-tdep.c (m68k_frame_unwind): Ditto.
* m68klinux-tdep.c (m68k_linux_sigtramp_frame_unwind): Ditto.
* m88k-tdep.c (m88k_frame_unwind): Ditto.
* mep-tdep.c (mep_frame_unwind): Ditto.
* microblaze-tdep.c (microblaze_frame_unwind): Ditto.
* mips-tdep.c (mips_insn16_frame_unwind, mips_insn32_frame_unwind)
(mips_stub_frame_unwind): Ditto.
* mn10300-tdep.c (mn10300_frame_unwind): Ditto.
* moxie-tdep.c (moxie_frame_unwind): Ditto.
* mt-tdep.c (mt_frame_unwind): Ditto.
* ppc-linux-tdep.c (ppu2spu_unwind): Ditto.
* ppcobsd-tdep.c (ppcobsd_sigtramp_frame_unwind): Ditto.
* rs6000-tdep.c (rs6000_frame_unwind): Ditto.
* s390-tdep.c (s390_frame_unwind, s390_stub_frame_unwind)
(s390_sigtramp_frame_unwind): Ditto.
* score-tdep.c (score_prologue_unwind): Ditto.
* sh-tdep.c (sh_frame_unwind): Ditto.
* sh64-tdep.c (sh64_frame_unwind): Ditto.
* sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_unwind): Ditto.
* sparc-tdep.c (sparc32_frame_unwind): Ditto.
* sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_unwind): Ditto.
* sparc64-tdep.c (sparc64_frame_unwind): Ditto.
* sparc64fbsd-tdep.c (sparc64fbsd_sigtramp_frame_unwind): Ditto.
* sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_frame_unwind): Ditto.
* sparc64obsd-tdep.c (sparc64obsd_frame_unwind)
(sparc64obsd_trapframe_unwind): Ditto.
* sparcnbsd-tdep.c (sparc32nbsd_sigcontext_frame_unwind): Ditto.
* sparcobsd-tdep.c (sparc32obsd_sigtramp_frame_unwind): Ditto.
* spu-tdep.c (spu_frame_unwind, spu2ppu_unwind): Ditto.
* v850-tdep.c (v850_frame_unwind): Ditto.
* vax-tdep.c (vax_frame_unwind): Ditto.
* vaxobsd-tdep.c (vaxobsd_sigtramp_frame_unwind): Ditto.
* xstormy16-tdep.c (frame_unwind xstormy16_frame_unwind): Ditto.
* xtensa-tdep.c (xtensa_unwind): Ditto.
* dwarf2loc.c (read_pieced_value): Handle get_frame_register_bytes
returning that the register piece is unavailable/optimized out.
(write_pieced_value): Handle get_frame_register_bytes returning
that the register piece is unavailable/optimized out when doing a
read-modify write of a bitfield.
* findvar.c (value_from_register): Handle get_frame_register_bytes
returning that the register piece is unavailable/optimized out.
* frame.c (get_frame_register_bytes): New parameters `optimizedp'
and `unavailablep'. Throw error on bad debug info. Use
frame_register instead of frame_register_read, to fill in the new
arguments.
* frame.h (get_frame_register_bytes): New parameters `optimizedp'
and `unavailablep'.
* valops.c: (value_assign): Adjust, and handle
get_frame_register_bytes failing.
* spu-tdep.c: Include exceptions.h.
(spu_software_single_step): Adjust, and handle
get_frame_register_bytes failing.
(spu_get_longjmp_target): Ditto.
* gdbarch.sh (register_to_value): Change to return int. New
parameters `optimizedp' and `unavailablep'.
* gdbarch.h, gdbarch.c: Regenerate.
* i386-tdep.c (i386_register_to_value): Adjust to new
gdbarch_register_to_value interface.
* i387-tdep.c (i387_register_to_value): Ditto.
* i387-tdep.h (i387_register_to_value): Ditto.
* alpha-tdep.c (alpha_register_to_value): Ditto.
* ia64-tdep.c (ia64_register_to_value): Ditto.
* m68k-tdep.c (m68k_register_to_value): Ditto.
* mips-tdep.c (mips_register_to_value): Ditto.
* rs6000-tdep.c (rs6000_register_to_value): Ditto.
* regcache.h (regcache_raw_read, regcache_raw_read_signed)
(regcache_raw_read_unsigned, regcache_raw_read_signed)
(regcache_raw_read_unsigned, regcache_raw_read_part)
(regcache_cooked_read, regcache_cooked_read_signed)
(regcache_cooked_read_unsigned, regcache_cooked_read_part)
(regcache_cooked_read_ftype): Change return to enum
register_status.
* regcache.c: Include exceptions.h
(regcache_save): Adjust to handle REG_UNAVAILABLE registers.
(do_cooked_read): Change return to enum register_status. Always
forward to regcache_cooked_read.
(regcache_raw_read): Change return to enum register_status. If
the register is not REG_VALID, memset the buffer. Return the
register's status.
(regcache_raw_read_signed): Handle non-REG_VALID registers and
return the register's status.
(regcache_raw_read_unsigned): Ditto.
(regcache_cooked_read): Change return to enum register_status.
Assert that with read-only regcaches, the register's status must
be known. If the regcache is read-only, and the register is not
REG_VALID, memset the buffer. Return the register's status.
(regcache_cooked_read_signed): Change return to enum
register_status. Handle non-REG_VALID registers and return the
register's status.
(regcache_cooked_read_unsigned): Change return to enum
register_status. Handle non-REG_VALID registers and return the
register's status.
(regcache_xfer_part, regcache_raw_read_part)
(regcache_cooked_read_part): Change return to enum
register_status. Return the register's status.
(regcache_read_pc): Throw NOT_AVAILABLE_ERROR if the register is
unavailable.
(regcache_dump): Handle unavailable cooked registers.
* frame.c (do_frame_register_read): Adjust interface to match
regcache_cooked_read_ftype.
* gdbarch.sh (pseudo_register_read): Change return to enum
register_status.
* gdbarch.h, gdbarch.c: Regenerate.
* i386-tdep.h (i386_pseudo_register_read): Change return to enum
register_status.
* i386-tdep.c (i386_pseudo_register_read): Change return to enum
register_status. If reading a raw register indicates the raw
register is not valid, return the raw register's status,
otherwise, return REG_VALID.
* amd64-tdep.c (amd64_pseudo_register_read): Change return to enum
register_status. Handle non-REG_VALID raw registers and return
the register's status.
* arm-tdep.c (arm_neon_quad_read)
(arm_pseudo_read): Change return to enum register_status. Handle
non-REG_VALID raw registers and return the register's status.
* avr-tdep.c (avr_pseudo_register_read): Ditto.
* frv-tdep.c (frv_pseudo_register_read): Ditto.
* h8300-tdep.c (h8300_pseudo_register_read): Ditto.
* hppa-tdep.c (hppa_pseudo_register_read): Ditto.
* m32c-tdep.c (m32c_move_reg_t): Change return to enum
register_status.
(m32c_raw_read, m32c_raw_write, m32c_banked_read)
(m32c_banked_write, m32c_sb_read, m32c_sb_write, m32c_part_read)
(m32c_part_write, m32c_cat_read, m32c_cat_write)
(m32c_r3r2r1r0_read, m32c_r3r2r1r0_write)
(m32c_pseudo_register_read): Change return to enum
register_status. Adjust.
* m68hc11-tdep.c (m68hc11_pseudo_register_read): Change return to
enum register_status. Return the register's status.
* mep-tdep.c (mep_pseudo_cr32_read): Change return to enum
register_status. Return the register's status.
(mep_pseudo_cr64_read, mep_pseudo_register_read): Ditto.
* mips-tdep.c (mips_pseudo_register_read): Ditto.
* mt-tdep.c (mt_pseudo_register_read): Ditto.
* rs6000-tdep.c (move_ev_register_func): New typedef.
(e500_move_ev_register): Use it. Change return to enum
register_status. Return the register's status.
(do_regcache_raw_read): New function.
(do_regcache_raw_write): New function.
(e500_pseudo_register_read): Change return to enum
register_status. Return the register's status. Use
do_regcache_raw_read.
(e500_pseudo_register_write): Adjust. Use do_regcache_raw_write.
(dfp_pseudo_register_read): Change return to enum register_status.
Return the register's status.
(vsx_pseudo_register_read): Ditto.
(efpr_pseudo_register_read): Ditto.
(rs6000_pseudo_register_read): Ditto.
* s390-tdep.c (s390_pseudo_register_read): Change return to enum
register_status. Return the register's status.
* sh64-tdep.c (pseudo_register_read_portions): New function.
(sh64_pseudo_register_read): Change return to enum
register_status. Use pseudo_register_read_portions. Return the
register's status.
* ia64-tdep.c (ia64_pseudo_register_read): Change return to enum
register_status. Return the register's status.
* sh-tdep.c (pseudo_register_read_portions): New function.
(sh_pseudo_register_read): Change return to enum register_status.
Use pseudo_register_read_portions. Return the register's status.
* sparc-tdep.c (sparc32_pseudo_register_read): Change return to
enum register_status. Return the register's status.
* sparc64-tdep.c (sparc64_pseudo_register_read): Ditto.
* spu-tdep.c (spu_pseudo_register_read_spu)
(spu_pseudo_register_read): Ditto.
* xtensa-tdep.c (xtensa_register_read_masked)
(xtensa_pseudo_register_read): Ditto.
* bfin-tdep.c (bfin_pseudo_register_read): Ditto.
* rs6000-tdep.c (IS_EFP_PSEUDOREG): Use correct constant for
the EFP register set size.
(efpr_pseudo_register_read): Use regcache_raw_read_part to read
data from the VMX register.
(efpr_pseudo_register_write): Use regcache_raw_write_part to read
and write data from/to the VMX register.
gdb/testsuite/
* gdb.arch/vsx-regs.exp: Add "vector_register1_vr" and
"vector_register2_vr" test strings. Test the extended floating
point registers (F32~F63).
* lib/gdb.exp (skip_vsx_tests): Update compile flags for the
IBM XL C compiler. Make the test program use a register provided
by the compiler for the lxvd2x instruction.
On powerpc, the prologue scanner reads instruction after instruction,
and just skips instructions that do not affect a frame. This means
that it does not stop if if finds and unexpected instruction (which
could possibly happen with optimization, I presume). To avoid scanning
too many instructions, it tries to establish an upper limit.
The upper limit is first computed using the debugging (line) info,
but if that fails, it falls back on an arbitrary 100 bytes (or 25
instructions). The problem is that, if the function is shorter than
those 25 instructions, we run the risk of skipping the entire function
and returning a PC that's outside our function.
In the event where we can find a symbol for a given PC (and therefore
can determine function start and end addresses), but cannot find an
upper limit using skip_prologue_using_sal, then we can at least limit
make sure that the 25 instructions do not put us beyour our function.
If it does, then further reduce the upper-limit to the end of the function.
gdb/ChangeLog:
* rs6000-tdep.c (rs6000_skip_prologue): Make sure that the prologue
upper limit address is not greater than the function end address
when the upper limit could not be computed using the debugging
info.
Thiago Jung Bauermann <bauerman@br.ibm.com>
Implement support for PowerPC BookE ranged watchpoints.
gdb/
* breakpoint.h
(struct breakpoint_ops) <resources_needed>: New method.
Initialize to NULL in all existing breakpoint_ops instances.
(struct breakpoint) <exact>: New field.
(target_exact_watchpoints): Declare external global.
* breakpoint.c (target_exact_watchpoints): New global flag.
(update_watchpoint): Set b->type to bp_hardware_watchpoint and
b->enable_state to bp_enabled before calling
hw_watchpoint_used_count.
(hw_watchpoint_used_count): Iterate over all bp_locations in a
watchpoint. Call breakpoint's breakpoint_ops.resources_needed
if available.
(insert_watchpoint, remove_watchpoint): Use fixed length of 1 byte
if the watchpoint is exact.
(resources_needed_watchpoint): New function.
(watchpoint_breakpoint_ops): Add resources_needed_watchpoint.
(watch_command_1): Set b->exact if the user asked for an exact
watchpoint and one can be set.
(can_use_hardware_watchpoint): Add exact_watchpoints argument.
Pass fixed length of 1 to target_region_ok_for_hw_watchpoint if
the user asks for an exact watchpoint and one can be set. Return
number of needed debug registers to watch the expression.
* gdbtypes.c (is_scalar_type): New function, based on
valprint.c:scalar_type_p.
(is_scalar_type_recursive): New function.
* gdbtypes.h (is_scalar_type_recursive): Declare.
* ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Always
handle regions when ranged watchpoints are available.
(create_watchpoint_request): New function.
(ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use
create_watchpoint_request.
* rs6000-tdep.c (show_powerpc_exact_watchpoints): New function.
(_initialize_rs6000_tdep): Add `exact-watchpoints' boolean to the
`set powerpc' and `show powerpc' commands.
* target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>:
Mention documentation comment in the target macro.
(target_region_ok_for_hw_watchpoint): Document return value.
gdb/doc/
* gdb.texinfo (PowerPC Embedded): Document ranged watchpoints and
the "set powerpc exact-watchpoints" flag.
bfd_uses_spe_extensions should only be used when BFD has been built
with ELF support. The typical way of checking that in GDB is to use
the HAVE_ELF macro.
gdb/ChangeLog:
* rs6000-tdep.c (bfd_uses_spe_extensions): Use bfd_elf_get_obj_attr_int
only if HAVE_ELF is defined.
Stan Shebs <stan@codesourcery.com>
Add base multi-executable/process support to GDB.
gdb/
* Makefile.in (SFILES): Add progspace.c.
(COMMON_OBS): Add progspace.o.
* progspace.h: New.
* progspace.c: New.
* breakpoint.h (struct bp_target_info) <placed_address_space>: New
field.
(struct bp_location) <pspace>: New field.
(struct breakpoint) <pspace>: New field.
(bpstat_stop_status, breakpoint_here_p)
(moribund_breakpoint_here_p, breakpoint_inserted_here_p)
(regular_breakpoint_inserted_here_p)
(software_breakpoint_inserted_here_p, breakpoint_thread_match)
(set_default_breakpoint): Adjust prototypes.
(remove_breakpoints_pid, breakpoint_program_space_exit): Declare.
(insert_single_step_breakpoint, deprecated_insert_raw_breakpoint):
Adjust prototypes.
* breakpoint.c (executing_startup): Delete.
(default_breakpoint_sspace): New.
(breakpoint_restore_shadows): Skip if the address space doesn't
match.
(update_watchpoint): Record the frame's program space in the
breakpoint location.
(insert_bp_location): Record the address space in target_info.
Adjust to pass the symbol space to solib_name_from_address.
(breakpoint_program_space_exit): New.
(insert_breakpoint_locations): Switch the symbol space and thread
when inserting breakpoints. Don't insert breakpoints in a vfork
parent waiting for vfork done if we're not attached to the vfork
child.
(remove_breakpoints_pid): New.
(reattach_breakpoints): Switch to a thread of PID. Ignore
breakpoints of other symbol spaces.
(create_internal_breakpoint): Store the symbol space in the sal.
(create_longjmp_master_breakpoint): Iterate over all symbol
spaces.
(update_breakpoints_after_exec): Ignore breakpoints for other
symbol spaces.
(remove_breakpoint): Rename to ...
(remove_breakpoint_1): ... this. Pass the breakpoints symbol
space to solib_name_from_address.
(remove_breakpoint): New.
(mark_breakpoints_out): Ignore breakpoints from other symbol
spaces.
(breakpoint_init_inferior): Ditto.
(breakpoint_here_p): Add an address space argument and adjust to
use breakpoint_address_match.
(moribund_breakpoint_here_p): Ditto.
(regular_breakpoint_inserted_here_p): Ditto.
(breakpoint_inserted_here_p): Ditto.
(software_breakpoint_inserted_here_p): Ditto.
(breakpoint_thread_match): Ditto.
(bpstat_check_location): Ditto.
(bpstat_stop_status): Ditto.
(print_breakpoint_location): If there's a location to print,
switch the current symbol space.
(print_one_breakpoint_location): Add `allflag' argument.
(print_one_breakpoint): Ditto. Adjust.
(do_captured_breakpoint_query): Adjust.
(breakpoint_1): Adjust.
(breakpoint_has_pc): Also match the symbol space.
(describe_other_breakpoints): Add a symbol space argument and
adjust.
(set_default_breakpoint): Add a symbol space argument. Set
default_breakpoint_sspace.
(breakpoint_address_match): New.
(check_duplicates_for): Add an address space argument, and adjust.
(set_raw_breakpoint): Record the symbol space in the location and
in the breakpoint.
(set_longjmp_breakpoint): Skip longjmp master breakpoints from
other symbol spaces.
(remove_thread_event_breakpoints, remove_solib_event_breakpoints)
(disable_breakpoints_in_shlibs): Skip breakpoints from other
symbol spaces.
(disable_breakpoints_in_unloaded_shlib): Match symbol spaces.
(create_catchpoint): Set the symbol space in the sal.
(disable_breakpoints_before_startup): Skip breakpoints from other
symbol spaces. Set executing_startup in the current symbol space.
(enable_breakpoints_after_startup): Clear executing_startup in the
current symbol space. Skip breakpoints from other symbol spaces.
(clone_momentary_breakpoint): Also copy the symbol space.
(add_location_to_breakpoint): Set the location's symbol space.
(bp_loc_is_permanent): Switch thread and symbol space.
(create_breakpoint): Adjust.
(expand_line_sal_maybe): Expand comment to mention symbol spaces.
Switch thread and symbol space when reading memory.
(parse_breakpoint_sals): Set the symbol space in the sal.
(break_command_really): Ditto.
(skip_prologue_sal): Switch and space.
(resolve_sal_pc): Ditto.
(watch_command_1): Record the symbol space in the sal.
(create_ada_exception_breakpoint): Adjust.
(clear_command): Adjust. Match symbol spaces.
(update_global_location_list): Use breakpoint_address_match.
(breakpoint_re_set_one): Switch thread and space.
(breakpoint_re_set): Save symbol space.
(breakpoint_re_set_thread): Also reset the symbol space.
(deprecated_insert_raw_breakpoint): Add an address space argument.
Adjust.
(insert_single_step_breakpoint): Ditto.
(single_step_breakpoint_inserted_here_p): Ditto.
(clear_syscall_counts): New.
(_initialize_breakpoint): Install it as inferior_exit observer.
* exec.h: Include "progspace.h".
(exec_bfd, exec_bfd_mtime): New defines.
(exec_close): Declare.
* exec.c: Include "gdbthread.h" and "progspace.h".
(exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete.
(using_exec_ops): New.
(exec_close_1): Rename to exec_close, and make public.
(exec_close): Rename to exec_close_1, and adjust all callers. Add
description. Remove target sections and close executables from
all program spaces.
(exec_file_attach): Add comment.
(add_target_sections): Check on `using_exec_ops' to check if the
target should be pushed.
(remove_target_sections): Only unpush the target if there are no
more target sections in any symbol space.
* gdbcore.h: Include "exec.h".
(exec_bfd, exec_bfd_mtime): Remove declarations.
* frame.h (get_frame_program_space, get_frame_address_space)
(frame_unwind_program_space): Declare.
* frame.c (struct frame_info) <pspace, aspace>: New fields.
(create_sentinel_frame): Add program space argument. Set the
pspace and aspace fields of the frame object.
(get_current_frame, create_new_frame): Adjust.
(get_frame_program_space): New.
(frame_unwind_program_space): New.
(get_frame_address_space): New.
* stack.c (print_frame_info): Adjust.
(print_frame): Use the frame's program space.
* gdbthread.h (any_live_thread_of_process): Declare.
* thread.c (any_live_thread_of_process): New.
(switch_to_thread): Switch the program space as well.
(restore_selected_frame): Don't warn if trying to restore frame
level 0.
* inferior.h: Include "progspace.h".
(detach_fork): Declare.
(struct inferior) <removable, aspace, pspace>
<vfork_parent, vfork_child, pending_detach>
<waiting_for_vfork_done>: New fields.
<terminal_info>: Remove field.
<data, num_data>: New fields.
(register_inferior_data, register_inferior_data_with_cleanup)
(clear_inferior_data, set_inferior_data, inferior_data): Declare.
(exit_inferior, exit_inferior_silent, exit_inferior_num_silent)
(inferior_appeared): Declare.
(find_inferior_pid): Typo.
(find_inferior_id, find_inferior_for_program_space): Declare.
(set_current_inferior, save_current_inferior, prune_inferiors)
(number_of_inferiors): Declare.
(inferior_list): Declare.
* inferior.c: Include "gdbcore.h" and "symfile.h".
(inferior_list): Make public.
(delete_inferior_1): Always delete thread silently.
(find_inferior_id): Make public.
(current_inferior_): New.
(current_inferior): Use it.
(set_current_inferior): New.
(restore_inferior): New.
(save_current_inferior): New.
(free_inferior): Free the per-inferior data.
(add_inferior_silent): Allocate per-inferior data.
Call inferior_appeared.
(delete_threads_of_inferior): New.
(delete_inferior_1): Adjust interface to take an inferior pointer.
(delete_inferior): Adjust.
(delete_inferior_silent): Adjust.
(exit_inferior_1): New.
(exit_inferior): New.
(exit_inferior_silent): New.
(exit_inferior_num_silent): New.
(detach_inferior): Adjust.
(inferior_appeared): New.
(discard_all_inferiors): Adjust.
(find_inferior_id): Make public. Assert pid is not zero.
(find_inferior_for_program_space): New.
(have_inferiors): Check if we have any inferior with pid not zero.
(have_live_inferiors): Go over all pushed targets looking for
process_stratum.
(prune_inferiors): New.
(number_of_inferiors): New.
(print_inferior): Add executable column. Print vfork parent/child
relationships.
(inferior_command): Adjust to cope with not running inferiors.
(remove_inferior_command): New.
(add_inferior_command): New.
(clone_inferior_command): New.
(struct inferior_data): New.
(struct inferior_data_registration): New.
(struct inferior_data_registry): New.
(inferior_data_registry): New.
(register_inferior_data_with_cleanup): New.
(register_inferior_data): New.
(inferior_alloc_data): New.
(inferior_free_data): New.
(clear_inferior_data): New.
(set_inferior_data): New.
(inferior_data): New.
(initialize_inferiors): New.
(_initialize_inferiors): Register "add-inferior",
"remove-inferior" and "clone-inferior" commands.
* objfiles.h: Include "progspace.h".
(struct objfile) <pspace>: New field.
(symfile_objfile, object_files): Don't declare.
(ALL_PSPACE_OBJFILES): New.
(ALL_PSPACE_OBJFILES_SAFE): New.
(ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust.
(ALL_PSPACE_SYMTABS): New.
(ALL_PRIMARY_SYMTABS): Adjust.
(ALL_PSPACE_PRIMARY_SYMTABS): New.
(ALL_PSYMTABS): Adjust.
(ALL_PSPACE_PSYMTABS): New.
* objfiles.c (object_files, symfile_objfile): Delete.
(struct objfile_sspace_info): New.
(objfiles_pspace_data): New.
(objfiles_pspace_data_cleanup): New.
(get_objfile_pspace_data): New.
(objfiles_changed_p): Delete.
(allocate_objfile): Set the objfile's program space. Adjust to
reference objfiles_changed_p in pspace data.
(free_objfile): Adjust to reference objfiles_changed_p in pspace
data.
(objfile_relocate): Ditto.
(update_section_map): Add pspace argument. Adjust to iterate over
objfiles in the passed in pspace.
(find_pc_section): Delete sections and num_sections statics.
Adjust to refer to program space's objfiles_changed_p. Adjust to
refer to sections and num_sections store in the objfile's pspace
data.
(objfiles_changed): Adjust to reference objfiles_changed_p in
pspace data.
(_initialize_objfiles): New.
* linespec.c (decode_all_digits, decode_dollar): Set the sal's
program space.
* source.c (current_source_pspace): New.
(get_current_source_symtab_and_line): Set the sal's program space.
(set_current_source_symtab_and_line): Set current_source_pspace.
(select_source_symtab): Ditto. Use ALL_OBJFILES.
(forget_cached_source_info): Iterate over all program spaces.
* symfile.c (clear_symtab_users): Adjust.
* symmisc.c (print_symbol_bcache_statistics): Iterate over all
program spaces.
(print_objfile_statistics): Ditto.
(maintenance_print_msymbols): Ditto.
(maintenance_print_objfiles): Ditto.
(maintenance_info_symtabs): Ditto.
(maintenance_info_psymtabs): Ditto.
* symtab.h (SYMTAB_PSPACE): New.
(struct symtab_and_line) <pspace>: New field.
* symtab.c (init_sal): Clear the sal's program space.
(find_pc_sect_symtab): Set the sal's program space. Switch thread
and space.
(append_expanded_sal): Add program space argument. Iterate over
all program spaces.
(expand_line_sal): Iterate over all program spaces. Switch
program space.
* target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New.
(struct target_ops) <to_thread_address_space>: New field.
(target_thread_address_space): Define.
* target.c (target_detach): Only remove breakpoints from the
inferior we're detaching.
(target_thread_address_space): New.
* defs.h (initialize_progspace): Declare.
* top.c (gdb_init): Call it.
* solist.h (struct so_list) <sspace>: New field.
* solib.h (struct program_space): Forward declare.
(solib_name_from_address): Adjust prototype.
* solib.c (so_list_head): Replace with a macro referencing the
program space.
(update_solib_list): Set the so's program space.
(solib_name_from_address): Add a program space argument and adjust.
* solib-svr4.c (struct svr4_info) <pid>: Delete field.
<interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low>
<interp_plt_sect_high>: New fields.
(svr4_info_p, svr4_info): Delete.
(solib_svr4_sspace_data): New.
(get_svr4_info): Rewrite.
(svr4_sspace_data_cleanup): New.
(open_symbol_file_object): Adjust.
(svr4_default_sos): Adjust.
(svr4_fetch_objfile_link_map): Adjust.
(interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low)
(interp_plt_sect_high): Delete.
(svr4_in_dynsym_resolve_code): Adjust.
(enable_break): Adjust.
(svr4_clear_solib): Revert bit that removed the svr4_info here,
and reinstate clearing debug_base, debug_loader_offset_p,
debug_loader_offset and debug_loader_name.
(_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't
install an inferior_exit observer anymore.
* printcmd.c (struct display) <pspace>: New field.
(display_command): Set the display's sspace.
(do_one_display): Match the display's sspace.
(display_uses_solib_p): Ditto.
* linux-fork.c (detach_fork): Moved to infrun.c.
(_initialize_linux_fork): Moved "detach-on-fork" command to
infrun.c.
* infrun.c (detach_fork): Moved from linux-fork.c.
(proceed_after_vfork_done): New.
(handle_vfork_child_exec_or_exit): New.
(follow_exec_mode_replace, follow_exec_mode_keep)
(follow_exec_mode_names, follow_exec_mode_string)
(show_follow_exec_mode_string): New.
(follow_exec): New. Reinstate the mark_breakpoints_out call.
Remove shared libraries before attaching new executable. If user
wants to keep the inferior, keep it.
(displaced_step_fixup): Adjust to pass an address space to the
breakpoints module.
(resume): Ditto.
(clear_proceed_status): In all-stop mode, always clear the proceed
status of all threads.
(prepare_to_proceed): Adjust to pass an address space to the
breakpoints module.
(proceed): Ditto.
(adjust_pc_after_break): Ditto.
(handle_inferior_event): When handling a process exit, switch the
program space to the inferior's that had exited. Call
handle_vfork_child_exec_or_exit. Adjust to pass an address space
to the breakpoints module. In non-stop mode, when following a
fork and detach-fork is off, also resume the other branch. Handle
TARGET_WAITKIND_VFORK_DONE. Set the program space in sals.
(normal_stop): Prune inferiors.
(_initialize_infrun): Install the new "follow-exec-mode" command.
"detach-on-fork" moved here.
* regcache.h (get_regcache_aspace): Declare.
* regcache.c (struct regcache) <aspace>: New field.
(regcache_xmalloc): Clear the aspace.
(get_regcache_aspace): New.
(regcache_cpy): Copy the aspace field.
(regcache_cpy_no_passthrough): Ditto.
(get_thread_regcache): Fetch the thread's address space from the
target, and store it in the regcache.
* infcall.c (call_function_by_hand): Set the sal's pspace.
* arch-utils.c (default_has_shared_address_space): New.
* arch-utils.h (default_has_shared_address_space): Declare.
* gdbarch.sh (has_shared_address_space): New.
* gdbarch.h, gdbarch.c: Regenerate.
* linux-tdep.c: Include auxv.h, target.h, elf/common.h.
(linux_has_shared_address_space): New.
(_initialize_linux_tdep): Declare.
* arm-tdep.c (arm_software_single_step): Pass the frame's address
space to insert_single_step_breakpoint.
* arm-linux-tdep.c (arm_linux_software_single_step): Pass the
frame's pspace to breakpoint functions.
* cris-tdep.c (crisv32_single_step_through_delay): Ditto.
(cris_software_single_step): Ditto.
* mips-tdep.c (deal_with_atomic_sequence): Add frame argument.
Pass the frame's pspace to breakpoint functions.
(mips_software_single_step): Adjust.
(mips_single_step_through_delay): Adjust.
* rs6000-aix-tdep.c (rs6000_software_single_step): Adjust.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust.
* solib-irix.c (enable_break): Adjust to pass the current frame's
address space to breakpoint functions.
* sparc-tdep.c (sparc_software_single_step): Ditto.
* spu-tdep.c (spu_software_single_step): Ditto.
* alpha-tdep.c (alpha_software_single_step): Ditto.
* record.c (record_wait): Adjust to pass an address space to the
breakpoints module.
* fork-child.c (fork_inferior): Set the new inferior's program and
address spaces.
* inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program
and address spaces.
(inf_ptrace_attach): Set the inferior's program and address spaces.
* linux-nat.c: Include "solib.h".
(linux_child_follow_fork): Manage parent and child's program and
address spaces. Clone the parent's program space if necessary.
Don't wait for the vfork to be done here. Refuse to resume if
following the vfork parent while leaving the child stopped.
(resume_callback): Don't resume a vfork parent.
(linux_nat_resume): Also check for pending events in the
lp->waitstatus field.
(linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE
events to the core.
(stop_wait_callback): Don't wait for SIGSTOP on vfork parents.
(cancel_breakpoint): Adjust.
* linux-thread-db.c (thread_db_wait): Don't remove thread event
breakpoints here.
(thread_db_mourn_inferior): Don't mark breakpoints out here.
Remove thread event breakpoints after mourning.
* corelow.c: Include progspace.h.
(core_open): Set the inferior's program and address spaces.
* remote.c (remote_add_inferior): Set the new inferior's program
and address spaces.
(remote_start_remote): Update address spaces.
(extended_remote_create_inferior_1): Don't init the thread list if
we already debugging other inferiors.
* darwin-nat.c (darwin_attach): Set the new inferior's program and
address spaces.
* gnu-nat.c (gnu_attach): Ditto.
* go32-nat.c (go32_create_inferior): Ditto.
* inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto.
* monitor.c (monitor_open): Ditto.
* nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto.
* procfs.c (do_attach): Ditto.
* windows-nat.c (do_initial_windows_stuff): Ditto.
* inflow.c (inferior_process_group)
(terminal_init_inferior_with_pgrp, terminal_inferior,
(terminal_ours_1, inflow_inferior_exit, copy_terminal_info)
(child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust
to use per-inferior data instead of inferior->terminal_info.
(inflow_inferior_data): New.
(inflow_new_inferior): Delete.
(inflow_inferior_data_cleanup): New.
(get_inflow_inferior_data): New.
* mi/mi-interp.c (mi_new_inferior): Rename to...
(mi_inferior_appeared): ... this.
(mi_interpreter_init): Adjust.
* tui/tui-disasm.c: Include "progspace.h".
(tui_set_disassem_content): Pass an address space to
breakpoint_here_p.
* NEWS: Mention multi-program debugging support. Mention new
commands "add-inferior", "clone-inferior", "remove-inferior",
"maint info program-spaces", and new option "set
follow-exec-mode".
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* observer.texi (new_inferior): Rename to...
(inferior_appeared): ... this.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/testsuite/
* gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork".
* gdb.base/foll-exec.exp: Adjust to expect a process id before
"Executing new program".
* gdb.base/foll-fork.exp: Adjust to spell out "follow-fork".
* gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being
left listed after having been killed.
* gdb.base/attach.exp: Adjust to spell out "symbol-file".
* gdb.base/maint.exp: Adjust test.
* Makefile.in (ALL_SUBDIRS): Add gdb.multi.
* gdb.multi/Makefile.in: New.
* gdb.multi/base.exp: New.
* gdb.multi/goodbye.c: New.
* gdb.multi/hangout.c: New.
* gdb.multi/hello.c: New.
* gdb.multi/bkpt-multi-exec.c: New.
* gdb.multi/bkpt-multi-exec.exp: New.
* gdb.multi/crashme.c: New.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* gdb.texinfo (Inferiors): Rename node to ...
(Inferiors and Programs): ... this. Mention running multiple
programs in the same debug session.
<info inferiors>: Mention the new 'Executable' column if "info
inferiors". Update examples. Document the "add-inferior",
"clone-inferior", "remove-inferior" and "maint info
program-spaces" commands.
(Process): Rename node to...
(Forks): ... this. Document "set|show follow-exec-mode".
* gdbarch.c, gdbarch.h: Regenerate.
* arch-utils.c (default_displaced_step_hw_singlestep): New function.
* arch-utils.h (default_displaced_step_hw_singlestep): Add prototype.
* ppc-linux-tdep.c (ppc_displaced_step_hw_singlestep): New function.
(rs6000_gdbarch_init): Install it.
* infrun.c (displaced_step_fixup): Use new callback to determine
whether to "step" or "continue" displaced copy.
(resume): Likewise. Do not call maybe_software_singlestep
for displaced stepping.
(maybe_software_singlestep): Do not handle displaced stepping.
Tom Tromey
Sanimir Agovic
Ulrich Weigand
Joel Brobecker
Alan Modra
Luis Machado
Andreas Tobler
Joel Brobecker
Edjunior Barbosa Machado
Sergio Durigan Junior
Doug Evans
Jan Kratochvil
Pedro Alves
Thiago Jung Bauermann
Michael Snyder
Nathan Froyd
Ulrich Weigand
Jerome Guitton