For GNU_PROPERTY_X86_COMPAT_ISA_1_USED and GNU_PROPERTY_X86_UINT32_OR_AND
properties, a bit in the output pr_data field is set if it is set in any
relocatable input pr_data fields and this property is present in all
relocatable input files. A missing property implies that its bits have
unknown values. When all bits in the the output pr_data field are zero,
this property should not be removed from output to indicate it has zero
in all bits.
bfd/
PR ld/23372
* elfxx-x86.c (_bfd_x86_elf_merge_gnu_properties): Don't remove
empty properties for GNU_PROPERTY_X86_COMPAT_ISA_1_USED and
GNU_PROPERTY_X86_UINT32_OR_AND.
(_bfd_x86_elf_link_fixup_gnu_properties): Likewise.
ld/
PR ld/23372
* testsuite/ld-i386/pr23372a.d: Updated.
* testsuite/ld-i386/pr23372c.d: Likewise.
* testsuite/ld-x86-64/pr23372a-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372a.d: Likewise.
* testsuite/ld-x86-64/pr23372c-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372c.d: Likewise.
Delay setting its alignment until we know it is non-empty. Otherwise an
empty iplt section may change vma and lma of the following sections, which
triggers moving dot of the following section backwards, resulting in a
warning and section lma not being set properly. It later leads to a
"File truncated" error.
bfd/
PR ld/23930
* elfxx-x86.c (_bfd_x86_elf_size_dynamic_sections): Update
the iplt section alignment if it is non-empty.
(_bfd_x86_elf_link_setup_gnu_properties): Set plt.iplt_alignment
and delay setting the iplt section alignment.
* elfxx-x86.h (elf_x86_plt_layout): Add iplt_alignment.
ld/
PR ld/23930
* testsuite/ld-i386/i386.exp: Run pr23930.
* testsuite/ld-i386/pr23930.d: New file.
* testsuite/ld-x86-64/pr23930-32.t: Likewise.
* testsuite/ld-x86-64/pr23930-x32.d: Likewise.
* testsuite/ld-x86-64/pr23930.d: Likewise.
* testsuite/ld-x86-64/pr23930.t: Likewise.
* testsuite/ld-x86-64/pr23930a.s: Likewise.
* testsuite/ld-x86-64/pr23930b.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr23930 and pr23930-x32.
IFUNC resolvers must always be called via their global entry point.
They will be called from ld.so rather than from the local executable.
PR 23937
bfd/
* elf64-ppc.c (write_plt_relocs_for_local_syms): Don't add local
entry offset for ifuncs.
ld/
* testsuite/ld-powerpc/pr23937.d,
* testsuite/ld-powerpc/pr23937.s: New test.
* testsuite/ld-powerpc/powerpc.exp: Run it.
When discovering the statement lists via their header variable
statement_list, file_chain and input_file_chain it can be confusing to
figure out what they are for. They can point to the same initial
statement and the relation between the next field they use is not
obvious from the name.
This commit adds comment for each of those statement list header to
explain what they are for and what next field they use. It also rewrite
the comment for the next fields to simply redirect the reader to the
list header to avoid duplication of documentation.
2018-11-29 Thomas Preud'homme <thomas.preudhomme@linaro.org>
ld/
* ldlang.c (statement_list): Document purpose and what next field it
uses.
(file_chain): Likewise.
(input_file_chain): Likewise.
* ldlang.h (lang_statement_header_type): Document statement list header
the next pointer correspond to.
(lang_statement_header_type): Replace comment for next and
next_real_file field to refer the reader to their corresponding
statement list header.
Accept R_MIPS_HI16, R_MIPS_HIGHER and R_MIPS_HIGHEST relocations and
their compressed counterparts in PIC code where the symbol referred is
absolute. Such an operation is meaningful, because an absolute symbol
effectively is a constant the calculation of the value of which has been
deferred to the static link time, and which is not going to change any
further at the dynamic load time. Therefore there is no need ever to
refuse the use of these relocations with such symbols, as the resulting
run-time value observed by the program will be correct even in PIC code.
This is not the case with R_MIPS_26 and its compressed counterparts,
because the run-time value calculated by the instructions these
relocations are used with depends on the address of the instruction
itself, and that can change according to the base address used by the
dynamic loader. Therefore these relocations have to continue being
rejected in PIC code even with absolute symbols.
This allows successful linking of code that relies on previous linker
behavior up to commit 861fb55ab5 ("Defer allocation of R_MIPS_REL32
GOT slots"), <https://sourceware.org/ml/binutils/2008-08/msg00096.html>,
which introduced the problematic check missing this special exception
for absolute symbols.
bfd/
* elfxx-mips.c (_bfd_mips_elf_check_relocs) <R_MIPS16_HI16>
<R_MIPS_HI16, R_MIPS_HIGHER, R_MIPS_HIGHEST, R_MICROMIPS_HI16>
<R_MICROMIPS_HIGHER, R_MICROMIPS_HIGHEST>: Also accept an
absolute symbol in PIC code.
ld/
* testsuite/ld-mips-elf/pic-reloc-0.d: New test.
* testsuite/ld-mips-elf/pic-reloc-1.d: New test.
* testsuite/ld-mips-elf/pic-reloc-2.d: New test.
* testsuite/ld-mips-elf/pic-reloc-3.d: New test.
* testsuite/ld-mips-elf/pic-reloc-4.d: New test.
* testsuite/ld-mips-elf/pic-reloc-absolute-hi.ld: New test
linker script.
* testsuite/ld-mips-elf/pic-reloc-absolute-lo.ld: New test
linker script.
* testsuite/ld-mips-elf/pic-reloc-ordinary.ld: New test linker
script.
* testsuite/ld-mips-elf/pic-reloc-j.s: New test source.
* testsuite/ld-mips-elf/pic-reloc-lui.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Similarly to commit 174d0a74a2 ("PowerPC/BFD: Convert `%P: %H:' to
`%H:' in error messages") convert linker relocation error messages to
use `%H:' rather `%P: %H:', removing inconsistent message composition
like:
$ cat reloc-j.s
.text
.globl foo
.ent foo
foo:
j bar
j bar
.end foo
$ cat reloc-j.ld
SECTIONS
{
bar = 0x12345678;
.text : { *(.text) }
/DISCARD/ : { *(*) }
}
$ as -o reloc-j.o reloc-j.s
$ ld -T reloc-j.ld -o reloc-j reloc-j.o
ld: tmpdir/reloc-j.o: in function `foo':
(.text+0x0): relocation truncated to fit: R_MIPS_26 against `bar'
ld: (.text+0x8): relocation truncated to fit: R_MIPS_26 against `bar'
$
where subsequent lines referring to issues within a single function have
the name of the linker executable prepended, but the first one does not.
As noted with the commit referred this breaks a GNU Coding Standard's
requirement that error messages from compilers should look like this:
source-file-name:lineno: message
also quoted in `vfinfo' code handling these specifiers.
Remove the linker name prefix then, making the messages now look like:
$ ld -T reloc-j.ld -o reloc-j reloc-j.o
tmpdir/reloc-j.o: in function `foo':
(.text+0x0): relocation truncated to fit: R_MIPS_26 against `bar'
(.text+0x8): relocation truncated to fit: R_MIPS_26 against `bar'
$
instead.
ld/
* ldmain.c (reloc_overflow): Use `%H:' rather than `%P: %H:'
with `einfo'.
(reloc_dangerous): Likewise.
(unattached_reloc): Likewise.
The fix for PR ld/22263 causes TLS relocations using ADRP to be relaxed
into MOVZ, however this causes issues for the erratum code.
The erratum code scans the input sections looking for ADRP instructions
and notes their location in the stream.
It then later tries to find them again in order to generate the linker
stubs. Due to the relaxation it instead finds a MOVZ and hard aborts.
Since this relaxation is a valid one, and in which case the erratum no
longer applies, it shouldn't abort but instead just continue.
This changes the TLS relaxation code such that when it finds an ADRP and
it relaxes it, it removes the erratum entry from the work list by changing
the stub type into none so the stub is ignored.
The entry is not actually removed as removal is a more expensive operation
and we have already allocated the memory anyway.
The clearing is done for IE->LE and GD->LE relaxations, and a testcase is
added for the IE case. The GD case I believe to be impossible to get together
with the erratum sequence due to the required BL which would break the sequence.
However to cover all basis I have added the guard there as well.
build on native hardware and regtested on
aarch64-none-elf, aarch64-none-elf (32 bit host),
aarch64-none-linux-gnu, aarch64-none-linux-gnu (32 bit host)
Cross-compiled and regtested on
aarch64-none-linux-gnu, aarch64_be-none-linux-gnu
Testcase in PR23940 tested and works as expected now and benchmarks ran on A53
showing no regressions and no issues.
bfd/ChangeLog:
PR ld/23904
* elfnn-aarch64.c (_bfd_aarch64_adrp_p): Use existing constants.
(_bfd_aarch64_erratum_843419_branch_to_stub): Use _bfd_aarch64_adrp_p.
(struct erratum_835769_branch_to_stub_clear_data): New.
(_bfd_aarch64_erratum_843419_clear_stub): New.
(clear_erratum_843419_entry): New.
(elfNN_aarch64_tls_relax): Use it.
(elfNN_aarch64_relocate_section): Pass input_section.
(aarch64_map_one_stub): Handle branch type none as valid.
ld/ChangeLog:
PR ld/23904
* testsuite/ld-aarch64/aarch64-elf.exp: Add erratum843419_tls_ie.
* testsuite/ld-aarch64/erratum843419_tls_ie.d: New test.
* testsuite/ld-aarch64/erratum843419_tls_ie.s: New test.
Glibc commit:
commit a15529fda8d132621328c3fe32997a3d9c55aef4
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Mon May 14 09:23:55 2018 -0700
i386: Replace PREINIT_FUNCTION@PLT with *%eax in call
Since we have loaded address of PREINIT_FUNCTION into %eax, we can
avoid extra branch to PLT slot.
changed __gmon_start__ relocations in crt1.o from
00000015 0000092b R_386_GOT32X 00000000 __gmon_start__
0000001e 00000904 R_386_PLT32 00000000 __gmon_start__
to
00000015 00000a2b R_386_GOT32X 00000000 __gmon_start__
As the result, .plt.sec section may be generated instead of .plt.got
section, depending on __gmon_start__ relocations.
* testsuite/ld-i386/plt-main-ibt.dd: Accept both .plt.got and
.plt.sec sections.
Add --enable-x86-feature and --disable-x86-feature options to elfedit
to set and clear the IBT and SHSTK bits in program property in ELF
executables and shared objects.
binutils/
* doc/binutils.texi: Document --enable-x86-feature and
--disable-x86-feature options for elfedit.
* elfedit.c: Include "config.h" and <sys/mman.h>.
(enable_x86_features): New.
(disable_x86_features): Likewise.
(update_gnu_property): Likewise.
(elf_x86_feature): Likewise.
(process_file): Call update_gnu_property on ET_EXEC or ET_DYN
file.
(command_line_switch): Add OPTION_ENABLE_X86_FEATURE and
OPTION_DISABLE_X86_FEATURE.
(options): Add--enable-x86-feature and --disable-x86-feature.
(usage): Likewise.
(main): Handle OPTION_ENABLE_X86_FEATURE and
OPTION_DISABLE_X86_FEATURE.
ld/
* testsuite/config/default.exp (ELFEDIT): New.
* testsuite/ld-elf/linux-x86.exp (elfedit_test): New proc.
Run elfedit tests.
* testsuite/ld-elf/x86-feature-1a.rd: New file.
* testsuite/ld-elf/x86-feature-1b.rd: Likewise.
* testsuite/ld-elf/x86-feature-1c.rd: Likewise.
* testsuite/ld-elf/x86-feature-1d.rd: Likewise.
* testsuite/ld-elf/x86-feature-1e.rd: Likewise.
commit e60f4d3bda
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Mon Nov 5 09:01:26 2018 -0800
x86: Disable GOT relaxation with data prefix
Since linker GOT relaxation isn't valid for 16-bit GOT access, we should
disable GOT relaxation with data prefix.
run_dump_test proposes an ld action but when trying to make use of it in
a gas test it gave me some Tcl error. It turns out that it references
the check_shared_lib_support procedure and ld_elf_shared_opt variable
both only available in ld-lib.exp. I've thus moved the procedure in
binutils-common.exp and defined the variable needed in the various
default.exp of testsuite that seem to be using run_dump_test.
Since check_shared_lib_support itself references the ld variable not
defined in binutils-common I've defined it from LD in run_dump_test and
fixed LD and LDFLAGS to be defined as expected by run_dump_test in the
various default.exp of testsuite using run_dump_test.
2018-11-01 Thomas Preud'homme <thomas.preudhomme@linaro.org>
binutils/
* testsuite/config/default.exp: Define LD, LDFLAGS and
ld_elf_shared_opt.
* testsuite/lib/binutils-common.exp (check_shared_lib_support): Moved
from ld-lib.exp.
(run_dump_test): Set ld to $LD.
gas/
* testsuite/config/default.exp: Define LD, LDFLAGS and
ld_elf_shared_opt.
ld/
* testsuite/lib/ld-lib.exp (check_shared_lib_support): Moved to
binutils-common.exp.
The idea of this change is to make -t output useful for users wanting
to package all the object files involved in linking for a bug report.
Something like the following should do the trick.
gcc hello.c -save-temps -Wl,-t | xargs realpath | sort | uniq > files
tar cJf test.tar.xz `cat files`
* ldlang.c (load_symbols): When -t, print file names for script
files and archives.
* ldmain.c (trace_files): Make an int.
(add_archive_element): Print archive elements only with multiple
-t options, or when archive is thin.
* ldmain.h (trace_files): Update.
* ldmisc.c (vfinfo): Don't print both original path and path in
sysroot.
* lexsup.c (parse_args <t>): Increment trace_files.
This output really belongs in ld --verbose.
* ldmain.c (main): Print emulation mode and "deleting executable"
for --verbose, not --trace.
(add_archive_element): Only print "no new IR symbols" for --verbose.
Prepending '/' to absolute paths doesn't gain us much, and results in
the current implementation of --trace emitting silly path-in-sysroot
output, eg.
/lib/ld-linux-x86-64.so.2 (//lib/ld-linux-x86-64.so.2)
* ldmain.c (get_sysroot): Return "" for "--sysroot=/".
For ld -r, we generally set the VMA of sections to zero. This is done
to make the output of ld -r most similar to that output by the
assembler, which generally has sections starting at VMA zero. In some
cases that covers for backend bugs which would mis-handle relocatable
object files with non-zero section VMAs.
This patch fixes a few sections that didn't have zero VMAs for ld -r.
A missing zero on .note.gnu.build-id and .eh_frame_hdr doesn't matter
much since these are linker generated symbols only output on final
link, but it's good to be consistent.
* Makefile.am (ei386beos.c, ei386go32.c): Correct dependencies.
* Makefile.in: Regenerate.
* scripttempl/elf.sc (.note.gnu.build-id, .eh_frame_hdr): Set
address with ${RELOCATING-0}.
* scripttempl/arclinux.sc: Likewise.
* scripttempl/armbpabi.sc: Likewise.
* scripttempl/avr.sc: Likewise.
* scripttempl/elf64hppa.sc: Likewise.
* scripttempl/elf_chaos.sc: Likewise.
* scripttempl/elfarc.sc: Likewise.
* scripttempl/elfxtensa.sc: Likewise.
* scripttempl/mep.sc: Likewise.
* scripttempl/nds32elf.sc: Likewise.
* scripttempl/pru.sc: Likewise.
* scripttempl/elf32msp430.sc: Likewise, and for other sections.
* scripttempl/epiphany_4x4.sc: Similarly.
Commit 91ae256e33 fixes the behavior of ld when `--gc-sections` and
`--gc-keep-exported` are both given on the linker command line. This
updates the ld documentation to suit.
* ld.texi (--gc-sections): Update.
When assigning symbol version, we should hide debug symbols defined in
discarded sections from IR objects so that they can be removed later.
bfd/
PR ld/23818
* elflink.c (_bfd_elf_link_assign_sym_version): Hide symbols
defined in discarded input sections.
ld/
PR ld/23818
* testsuite/ld-plugin/lto.exp: Run PR ld/23818 test.
* testsuite/ld-plugin/pr23818.d: New file.
* testsuite/ld-plugin/pr23818.t: Likewise.
* testsuite/ld-plugin/pr23818a.c: Likewise.
* testsuite/ld-plugin/pr23818b.c: Likewise.
Fixes a couple of ERROR results due to .set difference on alpha.
* testsuite/ld-elf/shared.exp: Don't build pr19073 test on alpha.
* testsuite/ld-elf/pr18720b.c: Don't use .set on alpha.
A symbol root is not needed if --gc-keep-exported is also given.
* ldlang.c (lang_end): Don't error if no --entry or --undefined
is given with -r -gc-sections if --gc-keep-exported.
This patch performs a run-time test that a shared libbfd.so has been
compiled with the same size bfd_vma as that of apps using the library.
On a 32-bit host it is easily possible to have one libbfd.so compiled
to support 64-bit targets (or configured with --enable-64-bit-bfd)
while another only supports 32-bit targets. The two libraries will
have differently sized bfd_vma types, and if the wrong one is loaded
all sorts of weird behaviour might be seen.
bfd/
PR 23534
* init.c (BFD_INIT_MAGIC): Define.
(bfd_init): Return BFD_INIT_MAGIC.
bfd-in2.h: Regenerate.
binutils/
PR 23534
* addr2line.c (main): Exit with fatal error if bfd_init
returns an unexpected value.
* ar.c (main): Likewise.
* dlltool.c (identify_dll_for_implib): Likewise.
* nm.c (main): Likewise.
* objcopy.c (main): Likewise.
* objdump.c (main): Likewise.
* size.c (main): Likewise.
* strings.c (main): Likewise.
* windmc.c (main): Likewise.
* windres.c (main): Likewise.
gas/
PR 23534
* as.c (main): Exit with fatal error if bfd_init returns an
unexpected value.
ld/
PR 23534
* ldmain.c (main): Exit with fatal error if bfd_init returns
an unexpected value.
With
commit 64029e9368
Author: Alan Modra <amodra@gmail.com>
Date: Fri Oct 5 11:40:54 2018 +0930
Separate header PT_LOAD for -z separate-code
there is no need to add a GNU_PROPERTY_X86_ISA_1_USED note to force
program header in in non-code PT_LOAD segment when -z separate-code
is used.
bfd/
PR ld/23428
* elfxx-x86.c (_bfd_x86_elf_link_setup_gnu_properties): Don't
add GNU_PROPERTY_X86_FEATURE_2_NEEDED to force program header
in non-code PT_LOAD segment.
ld/
PR ld/23428
* testsuite/ld-i386/property-x86-4a.d: Updated.
* testsuite/ld-x86-64/property-x86-4a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-4a.d: Likewise.
Properly group orphan note sections. When placing orphan note section
as the first note section, place it after the section before all note
sections.
PR ld/23658
* ldlang.c (lang_insert_orphan): Properly group and place orphan
note sections. Properly handle orphan note section before all
note sections.
* testsuite/ld-elf/pr23658-1.d: Renamed to ...
* testsuite/ld-elf/pr23658-1a.d: This. Updated.
* testsuite/ld-elf/pr23658-1b.d: New test.
* testsuite/ld-elf/pr23658-1c.d: Likewise.
This patch, along with previous patches in the series, supports
putting the ELF file header and program headers in a PT_LOAD without
sections.
Logic governing whether headers a loaded has changed a little: The
primary reason to include headers is now the presence of
SIZEOF_HEADERS in a linker script. However, to support scripts that
may have reserved space for headers by hand, we continue to add
headers whenever the first section address is past the end of headers
modulo page size.
include/
* bfdlink.h (struct bfd_link_info): Add load_phdrs field.
bfd/
* elf-nacl.c (nacl_modify_segment_map): Cope with header PT_LOAD
lacking sections.
* elf.c (_bfd_elf_map_sections_to_segments): Assume file and
program headers are required when info->load_phdrs. Reorganize
code handling program headers. Generate a mapping without
sections just for file and program headers when -z separate-code
would indicate they should be on a different page to the first
section.
ld/
* ldexp.c (fold_name <SIZEOF_HEADERS>): Set link_info.load_phdrs.
* testsuite/ld-elf/loadaddr1.d: Pass -z noseparate-code.
* testsuite/ld-elf/loadaddr2.d: Likewise.
* testsuite/ld-i386/vxworks2.sd: Adjust expected output.
* testsuite/ld-powerpc/vxworks2.sd: Likewise.
* testsuite/ld-elf/overlay.d: Remove spu xfail.
* testsuite/ld-spu/ovl.lnk: Don't use SIZEOF_HEADERS.
* testsuite/ld-tic6x/dsbt-be.ld: Likewise.
* testsuite/ld-tic6x/dsbt-inrange.ld: Likewise.
* testsuite/ld-tic6x/dsbt-overflow.ld: Likewise.
* testsuite/ld-tic6x/dsbt.ld: Likewise.
Some time ago the pr19593 test was xfailed for alpha. This turned out
to be the wrong course of action since the test exposed a bug in
orphan section placement. On alpha, orphan sections were being
inserted before ". = SIZEOF_HEADERS" due to the test having two
assignments, and on alpha, an output section statement from
-Ttext-segment being passed to ld.
* ldlang.c (insert_os_after): Clear ignore_first on assignment to
dot, not any assignment. Clear ignore_first on output section
statement contents too.
* testsuite/ld-elf/pr19539.d: Remove alpha xfail.
Some targets don't set a default interpreter, resulting in an empty
.interp section unless --dynamic-linker is passed to ld. A PT_INTERP
without a path is rather useless.
The testsuite change fixes a failure on microblaze-linux.
bfd/
* elf.c (get_program_header_size): Don't count PT_INTERP if
.interp is empty.
(_bfd_elf_map_sections_to_segments): Don't create PT_INTERP if
.interp is empty.
ld/
* testsuite/ld-elf/pr22423.d: Pass --dynamic-linker to ld.
This patch adds the new instruction and relocation as per proposal:
https://openrisc.io/proposals/ladrp
This is to be added to the spec in an upcoming revision. The new instruction
l.adrp loads the page offset of the current instruction offset by
a 21-bit immediate shifted left 13-bits. This is meant to be used with
a 13-bit lower bit page offset. This allows us to free up the got
register r16.
l.adrp r3, foo
l.ori r4, r3, po(foo)
l.lbz r5, po(foo)(r3)
l.sb po(foo)(r3), r6
The relocations we add are:
- BFD_RELOC_OR1K_PLTA26 For PLT jump relocation with PLT entry
asm: plta() implemented using l.ardp, meaning
no need for r16 (the GOT reg)
- BFD_RELOC_OR1K_GOT_PG21 Upper 21-bit Page offset got address
asm: got()
- BFD_RELOC_OR1K_TLS_GD_PG21 Upper 21-bit Page offset with TLS General
asm: tlsgd() Dynamic calculation
- BFD_RELOC_OR1K_TLS_LDM_PG21 Upper 21-bit Page offset with TLS local
asm: tlsldm() dynamic calculation
- BFD_RELOC_OR1K_TLS_IE_PG21 Upper 21-bit Page offset with TLS Initial
asm: gottp() Executable calculation
- BFD_RELOC_OR1K_PCREL_PG21 Default relocation for disp21 (l.adrp
instructions)
- BFD_RELOC_OR1K_LO13 low 13-bit page offset relocation
asm: po() i.e. mem loads, addi etc
- BFD_RELOC_OR1K_SLO13 low 13-bit page offset relocation
asm: po() i.e. mem stores, with split immediate
- BFD_RELOC_OR1K_GOT_LO13, low 13-bit page offset with GOT calcs
asm: gotpo()
- BFD_RELOC_OR1K_TLS_GD_LO13 Lower 13-bit offset with TLS GD calcs
asm: tlsgdpo()
- BFD_RELOC_OR1K_TLS_LDM_LO13 Lower 13-bit offset with TLS LD calcs
asm: tlsldmpo()
- BFD_RELOC_OR1K_TLS_IE_LO13 Lower 13-bit offset with TLS IE calcs
asm: gottppo()
bfd/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* bfd-in2.h: Regenerated.
* elf32-or1k.c: (or1k_elf_howto_table): Fix formatting for
R_OR1K_PLT26, Add R_OR1K_PCREL_PG21, R_OR1K_GOT_PG21,
R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21,
R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13,
R_OR1K_TLS_IE_LO13, R_OR1K_SLO13, R_OR1K_PLTA26.
(or1k_reloc_map): Add BFD_RELOC_OR1K_PCREL_PG21,
BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_TLS_GD_PG21,
BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_IE_PG21,
BFD_RELOC_OR1K_LO13, BFD_RELOC_OR1K_GOT_LO13,
BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_GD_LO13,
BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_LO13,
BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_PLTA26.
(elf_or1k_link_hash_table): Add field saw_plta.
(or1k_final_link_relocate): Add value calculations for new relocations.
(or1k_elf_relocate_section): Add section relocations for new
relocations.
(or1k_write_plt_entry): New function.
(or1k_elf_finish_dynamic_sections): Add support for PLTA relocations
using new l.adrp instruction. Cleanup PLT relocation code generation.
* libbfd.h: Regenerated.
* reloc.c: Add BFD_RELOC_OR1K_PCREL_PG21, BFD_RELOC_OR1K_LO13,
BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_GOT_LO13,
BFD_RELOC_OR1K_PLTA26, BFD_RELOC_OR1K_TLS_GD_PG21,
BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21,
BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21,
BFD_RELOC_OR1K_TLS_IE_LO13.
cpu/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* or1k.opc (parse_disp26): Add support for plta() relocations.
(parse_disp21): New function.
(or1k_rclass): New enum.
(or1k_rtype): New enum.
(or1k_imm16_relocs): Define new PO and SPO relocation mappings.
(parse_reloc): Add new po(), gotpo() and gottppo() for LO13 relocations.
(parse_imm16): Add support for the new 21bit and 13bit relocations.
* or1korbis.cpu (f-disp26): Don't assume SI.
(f-disp21): New pc-relative 21-bit 13 shifted to right.
(insn-opcode): Add ADRP.
(l-adrp): New instruction.
gas/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* config/tc-or1k.c (or1k_apply_fix): Add BFD_RELOC_OR1K_TLS_GD_PG21,
BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21,
BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21,
BFD_RELOC_OR1K_TLS_IE_LO13.
* testsuite/gas/or1k/allinsn.s: Add test for l.adrp.
* testsuite/gas/or1k/allinsn.d: Add test results for new
instructions.
* testsuite/gas/or1k/reloc-1.s: Add tests to generate
R_OR1K_PLTA26, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21,
R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13,
R_OR1K_TLD_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_LO13, R_OR1K_SLO13
relocations.
* testsuite/gas/or1k/reloc-1.d: Add relocation results for
tests.
* testsuite/gas/or1k/reloc-2.s: Add negative tests for store to
gotpo().
* testsuite/gas/or1k/reloc-2.l: Add expected error test results.
ld/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* testsuite/ld-or1k/or1k.exp: Add test cases for plt generation.
* testsuite/ld-or1k/plt1.dd: New file.
* testsuite/ld-or1k/plt1.s: New file.
* testsuite/ld-or1k/plt1.x.dd: New file.
* testsuite/ld-or1k/plta1.dd: New file.
* testsuite/ld-or1k/plta1.s: New file.
* testsuite/ld-or1k/pltlib.s: New file.
include/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* elf/or1k.h (elf_or1k_reloc_type): Add R_OR1K_PCREL_PG21,
R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21,
R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13,
R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13, R_OR1K_TLS_IE_LO13,
R_OR1K_SLO13, R_OR1K_PLTA26.
opcodes/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* or1k-asm.c: Regenerated.
* or1k-desc.c: Regenerated.
* or1k-desc.h: Regenerated.
* or1k-dis.c: Regenerated.
* or1k-ibld.c: Regenerated.
* or1k-opc.c: Regenerated.
* or1k-opc.h: Regenerated.
* or1k-opinst.c: Regenerated.
This patch adds the following target relocations:
- BFD_RELOC_HI16_S High 16-bit relocation, for used with signed
asm: ha() lower.
- BFD_RELOC_HI16_S_GOTOFF High 16-bit GOT offset relocation for local
asm: gotoffha() symbols, for use with signed lower.
- BFD_RELOC_OR1K_TLS_IE_AHI16 High 16-bit TLS relocation with initial
asm: gottpoffha() executable calculation, for use with signed
lower.
- BFD_RELOC_OR1K_TLS_LE_AHI16 High 16-bit TLS relocation for local executable
asm: tpoffha() variables, for use with signed lower.
- BFD_RELOC_OR1K_SLO16 Split lower 16-bit relocation, used with
asm: lo() OpenRISC store instructions.
- BFD_RELOC_OR1K_GOTOFF_SLO16 Split lower 16-bit GOT offset relocation for
asm: gotofflo() local symbols, used with OpenRISC store
instructions.
- BFD_RELOC_OR1K_TLS_LE_SLO16 Split lower 16-bit relocation for TLS local
asm: tpofflo() executable variables, used with OpenRISC store
instructions.
bfd/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
Stafford Horne <shorne@gmail.com>
* bfd-in2.h: Regenerated.
* elf32-or1k.c (N_ONES): New macro.
(or1k_elf_howto_table): Fix R_OR1K_PLT26 to complain on overflow.
Add definitions for R_OR1K_TLS_TPOFF, R_OR1K_TLS_DTPOFF,
R_OR1K_TLS_DTPMOD, R_OR1K_AHI16, R_OR1K_GOTOFF_AHI16,
R_OR1K_TLS_IE_AHI16, R_OR1K_TLS_LE_AHI16, R_OR1K_SLO16,
R_OR1K_GOTOFF_SLO16, R_OR1K_TLS_LE_SLO16.
(or1k_reloc_map): Add entries for BFD_RELOC_HI16_S,
BFD_RELOC_LO16_GOTOFF, BFD_RELOC_HI16_GOTOFF, BFD_RELOC_HI16_S_GOTOFF,
BFD_RELOC_OR1K_TLS_IE_AHI16, BFD_RELOC_OR1K_TLS_LE_AHI16,
BFD_RELOC_OR1K_SLO16, BFD_RELOC_OR1K_GOTOFF_SLO16,
BFD_RELOC_OR1K_TLS_LE_SLO16.
(or1k_reloc_type_lookup): Change search loop to start ad index 0 and
also check results before returning.
(or1k_reloc_name_lookup): Simplify loop to use R_OR1K_max as index
limit.
(or1k_final_link_relocate): New function.
(or1k_elf_relocate_section): Add support for new AHI and SLO
relocations. Use or1k_final_link_relocate instead of generic
_bfd_final_link_relocate.
(or1k_elf_check_relocs): Add support for new AHI and SLO relocations.
* reloc.c: Add new enums for BFD_RELOC_OR1K_SLO16,
BFD_RELOC_OR1K_GOTOFF_SLO16, BFD_RELOC_OR1K_TLS_IE_AHI16,
BFD_RELOC_OR1K_TLS_IE_AHI16, BFD_RELOC_OR1K_TLS_LE_AHI16,
BFD_RELOC_OR1K_TLS_LE_SLO16. Remove unused BFD_RELOC_OR1K_GOTOFF_HI16
and BFD_RELOC_OR1K_GOTOFF_LO16.
* libbfd.h: Regenerated.
cpu/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* or1k.opc: Add RTYPE_ enum.
(INVALID_STORE_RELOC): New string.
(or1k_imm16_relocs): New array array.
(parse_reloc): New static function that just does the parsing.
(parse_imm16): New static function for generic parsing.
(parse_simm16): Change to just call parse_imm16.
(parse_simm16_split): New function.
(parse_uimm16): Change to call parse_imm16.
(parse_uimm16_split): New function.
* or1korbis.cpu (simm16-split): Change to use new simm16_split.
(uimm16-split): Change to use new uimm16_split.
gas/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* testsuite/gas/or1k/allinsn.d (l_ha): Add result for ha() relocation.
* testsuite/gas/or1k/allinsn.s (l_ha): Add test for ha() relocations.
* testsuite/gas/or1k/allinsn.exp: Renamed to or1k.exp.
* testsuite/gas/or1k/or1k.exp: Add reloc-2 list test.
* testsuite/gas/or1k/reloc-1.d: New file.
* testsuite/gas/or1k/reloc-1.s: New file.
* testsuite/gas/or1k/reloc-2.l: New file.
* testsuite/gas/or1k/reloc-2.s: New file.
include/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* elf/or1k.h (elf_or1k_reloc_type): Add R_OR1K_AHI16,
R_OR1K_GOTOFF_AHI16, R_OR1K_TLS_IE_AHI16, R_OR1K_TLS_LE_AHI16,
R_OR1K_SLO16, R_OR1K_GOTOFF_SLO16, R_OR1K_TLS_LE_SLO16.
ld/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* testsuite/ld-or1k/offsets1.d: New file.
* testsuite/ld-or1k/offsets1.s: New file.
* testsuite/ld-or1k/or1k.exp: New file.
opcodes/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* or1k-asm.c: Regenerate.
Since ft32-* and xgate-* use generic linker, SHT_NOTE sections aren't
grouped nor sorted.
PR ld/23658
* testsuite/ld-elf/pr23658-1.d: Also xfail ft32-* and xgate-*.
Add testcases to verify that all SHT_NOTE sections with the same section
alignment are placed in a single PT_NOTE segment.
PR ld/23658
* testsuite/ld-elf/pr23658-1.d: New file.
* testsuite/ld-elf/pr23658-1a.s: Likewise.
* testsuite/ld-elf/pr23658-1b.s: Likewise.
* testsuite/ld-elf/pr23658-1c.s: Likewise.
* testsuite/ld-elf/pr23658-1d.s: Likewise.
* testsuite/ld-elf/pr23658-2.rd: Likewise.
* testsuite/ld-elf/pr23658-3.d: Likewise.
* testsuite/ld-elf/pr23658-3.s: Likewise.
* testsuite/ld-elf/pr23658-3.t: Likewise.
* testsuite/ld-elf/shared.exp: Run PR ld/23658 tests.
To support putting all adjacent SHT_NOTE sections with the same section
alignment into a single PT_NOTE segment, lang_insert_orphan must group
and sort output note sections by section alignments in both output
section list as well as output section statement list.
PR ld/23658
* ldlang.c (lang_insert_orphan): Group and sort output note
sections by section alignments.
This gets rid of the couple of linker failures for visium-elf:
FAIL: ld-elf/pr14156b
FAIL: ld-elf/pr22677
by tweaking the respective testcases. The first tweak is the same as the
one made to the sibling testcase ld-elf/pr14156a.d about one year ago and
the second tweak adds the usual main/start/_start/__start symbols.
ld/
* testsuite/ld-elf/pr14156b.d: Adjust for extra symbols.
* testsuite/ld-elf/pr22677.s: Define main/start/_start/__start.
bfd/
* elfnn-riscv.c (riscv_resolve_pcrel_lo_relocs): Add check for reloc
overflow with addend. Use reloc_dangerous instead of reloc_overflow.
Add strings for the two errors handled here.
(riscv_elf_relocate_section) In case R_RISCV_PCREL_LO12_I, rewrite
comment. Only give error with addend when used with section symbol.
In case bfd_reloc_dangerous, update error string.
ld/
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Run pcrel-lo-addend-2.
* testsuite/ld-riscv/elf/ld-riscv-elf/pcrel-lo-addend-2.d: New.
* testsuite/ld-riscv/elf/ld-riscv-elf/pcrel-lo-addend-2.s: New.
* testsuite/ld-riscv/elf/ld-riscv-elf/pcrel-lo-addend.d: Update name
and error string.
We have not only removed all unsupported and obsolete code, but also supported lost of new features,
including better link-time relaxations and TLS implementations. Besides, the files generated by the
newly assembler and linker usually get higher performance and more optimized code size.
ld * emultempl/nds32elf.em (hyper_relax): New variable.
(nds32_elf_create_output_section_statements):
the parameters of bfd_elf32_nds32_set_target_option
(PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Add new option --mhyper-relax.
* emultempl/nds32elf.em (nds32_elf_after_open): Updated.
* emultempl/nds32elf.em (tls_desc_trampoline): New variable.
* (nds32_elf_create_output_section_statements): Updated.
* (nds32_elf_after_parse): Disable relaxations when PIC is enable.
* (PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Add new option --m[no-]tlsdesc-trampoline.
include * elf/nds32.h: Remove the unused target features.
* dis-asm.h (disassemble_init_nds32): Declared.
* elf/nds32.h (E_NDS32_NULL): Removed.
(E_NDS32_HAS_DSP_INST, E_NDS32_HAS_ZOL): New.
* opcode/nds32.h: Ident.
(N32_SUB6, INSN_LW): New macros.
(enum n32_opcodes): Updated.
* elf/nds32.h: Doc fixes.
* elf/nds32.h: Add R_NDS32_LSI.
* elf/nds32.h: Add new relocations for TLS.
gas * config/tc-nds32.c: Remove the unused target features.
(nds32_relax_relocs, md_pseudo_table, nds32_elf_record_fixup_exp,
nds32_set_elf_flags_by_insn, nds32_insert_relax_entry,
nds32_apply_fix): Likewise.
(nds32_no_ex9_begin): Removed.
* config/tc-nds32.c (add_mapping_symbol_for_align,
make_mapping_symbol, add_mapping_symbol): New functions.
* config/tc-nds32.h (enum mstate): New.
(nds32_segment_info_type): Likewise.
* configure.ac (--enable-dsp-ext, --enable-zol-ext): New options.
* config.in: Regenerated.
* configure: Regenerated.
* config/tc-nds32.c (nds32_dx_regs):
Set the value according to the configuration.
(nds32_perf_ext, nds32_perf_ext2, nds32_string_ext, nds32_audio_ext):
Likewise.
(nds32_dsp_ext): New variable. Set the value according to the
configuration.
(nds32_zol_ext): Likewise.
(asm_desc, nds32_pseudo_opcode_table): Make them static.
(nds32_set_elf_flags_by_insn): Updated.
(nds32_check_insn_available): Updated.
(nds32_str_tolower): New function.
* config/tc-nds32.c (relax_table): Updated.
(md_begin): Updated.
(md_assemble): Use XNEW macro to allocate space for `insn.info',
and then remember to free it.
(md_section_align): Cast (-1) to ValueT.
(nds32_get_align): Cast (~0U) to addressT.
(nds32_relax_branch_instructions): Updated.
(md_convert_frag): Add new local variable `final_r_type'.
(invalid_prev_frag): Add new bfd_boolean parameter `relax'.
All callers changed.
* config/tc-nds32.c (struct nds32_relocs_pattern): Add `insn' field.
(struct nds32_hint_map): Add `option_list' field.
(struct suffix_name, suffix_table): Remove the unused `pic' field.
(do_pseudo_b, do_pseudo_bal): Remove the suffix checking.
(do_pseudo_la_internal, do_pseudo_pushpopm): Indent.
(relax_hint_bias, relax_hint_id_current): New static variables.
(reset_bias, relax_hint_begin): New variables.
(nds_itoa): New function.
(CLEAN_REG, GET_OPCODE): New macros.
(struct relax_hint_id): New.
(nds32_relax_hint): For .relax_hint directive, we can use `begin'
and `end' to mark the relax pattern without giving exactly id number.
(nds32_elf_append_relax_relocs): Handle the case that the .relax_hint
directives are attached to pseudo instruction.
(nds32_elf_save_pseudo_pattern): Change the second parameter from
instruction's opcode to byte code.
(nds32_elf_build_relax_relation): Add new bfd_boolean parameter
`pseudo_hint'.
(nds32_lookup_pseudo_opcode): Fix the overflow issue.
(enum nds32_insn_type): Add N32_RELAX_ALU1 and N32_RELAX_16BIT.
(nds32_elf_record_fixup_exp, relax_ls_table, hint_map,
nds32_find_reloc_table, nds32_match_hint_insn, nds32_parse_name):
Updated.
* config/tc-nds32.h (MAX_RELAX_NUM): Extend it to 6.
(enum nds32_relax_hint_type): Merge NDS32_RELAX_HINT_LA and
NDS32_RELAX_HINT_LS into NDS32_RELAX_HINT_LALS. Add
NDS32_RELAX_HINT_LA_PLT, NDS32_RELAX_HINT_LA_GOT and
NDS32_RELAX_HINT_LA_GOTOFF.
* config/tc-nds32.h (relax_ls_table): Add floating load/store
to gp relax pattern.
(hint_map, nds32_find_reloc_table): Likewise.
* configure.ac: Define NDS32_LINUX_TOOLCHAIN.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-nds32.h (enum nds32_ramp): Updated.
(enum nds32_relax_hint_type): Likewise.
* config/tc-nds32.c: Include "errno.h" and "limits.h".
(relax_ls_table): Add TLS relax patterns.
(nds32_elf_append_relax_relocs): Attach BFD_RELOC_NDS32_GROUP on
each instructions of TLS patterns.
(nds32_elf_record_fixup_exp): Updated.
(nds32_apply_fix): Likewise.
(suffix_table): Add TLSDESC suffix.
binutils* testsuite/binutils-all/objcopy.exp: Set the unsupported reloc number
from 215 to 255 for NDS32.
bfd * elf32-nds32.c (nds32_elf_relax_loadstore):
Remove the unused target features.
(bfd_elf32_nds32_set_target_option): Remove the unused parameters.
(nds32_elf_relax_piclo12, nds32_elf_relax_letlslo12,
nds32_elf_relax_letlsadd, nds32_elf_relax_letlsls,
nds32_elf_relax_pltgot_suff, nds32_elf_relax_got_suff
nds32_elf_relax_gotoff_suff, calculate_plt_memory_address,
calculate_plt_offset, calculate_got_memory_address,
nds32_elf_check_dup_relocs): Removed.
All callers changed.
* elf32-nds32.h: Remove the unused macros and defines.
(elf_nds32_link_hash_table): Remove the unused variable.
(bfd_elf32_nds32_set_target_option): Update prototype.
(nds32_elf_ex9_init): Removed.
* elf32-nds32.c (nds32_convert_32_to_16): Updated.
* elf32-nds32.c (HOWTO2, HOWTO3): Define new HOWTO macros
to initialize array nds32_elf_howto_table in any order
without lots of EMPTY_HOWTO.
(nds32_reloc_map): Updated.
* reloc.c: Add BFD_RELOC_NDS32_LSI.
* bfd-in2.h: Regenerated.
* bfd/libbfd.h: Regenerated.
* elf32-nds32.c (nds32_elf_relax_howto_table): Add R_NDS32_LSI.
(nds32_reloc_map): Likewise.
(nds32_elf_relax_flsi): New function.
(nds32_elf_relax_section): Support floating load/store relaxation.
* elf32-nds32.c (NDS32_GUARD_SEC_P, elf32_nds32_local_gp_offset):
New macro.
(struct elf_nds32_link_hash_entry): New `offset_to_gp' field.
(struct elf_nds32_obj_tdata): New `offset_to_gp' and `hdr_size' fields.
(elf32_nds32_allocate_local_sym_info, nds32_elf_relax_guard,
nds32_elf_is_target_special_symbol, nds32_elf_maybe_function_sym):
New functions.
(nds32_info_to_howto_rel): Add BFD_ASSERT.
(bfd_elf32_bfd_reloc_type_table_lookup, nds32_elf_link_hash_newfunc,
nds32_elf_link_hash_table_create, nds32_elf_relocate_section,
nds32_elf_relax_loadstore, nds32_elf_relax_lo12, nds32_relax_adjust_label,
bfd_elf32_nds32_set_target_option, nds32_fag_mark_relax): Updated.
(nds32_elf_final_sda_base): Improve it to find the better gp value.
(insert_nds32_elf_blank): Must consider `len' when inserting blanks.
* elf32-nds32.h (bfd_elf32_nds32_set_target_option): Update prototype.
(struct elf_nds32_link_hash_table): Add new variable `hyper_relax'.
* elf32-nds32.c (elf32_nds32_allocate_dynrelocs): New function.
(create_got_section): Likewise.
(allocate_dynrelocs, nds32_elf_size_dynamic_sections,
nds32_elf_relocate_section, nds32_elf_finish_dynamic_symbol): Updated.
(nds32_elf_check_relocs): Fix the issue that the shared library may
has TEXTREL entry in the dynamic section.
(nds32_elf_create_dynamic_sections): Enable to call readonly_dynrelocs
since the TEXTREL issue is fixed in the nds32_elf_check_relocs.
(nds32_elf_finish_dynamic_sections): Update and add DT_RELASZ
dynamic entry.
(calculate_offset): Remove the unused parameter `pic_ext_target' and
related codes.
All callers changed.
(elf_backend_dtrel_excludes_plt): Disable it temporarily since it
will cause some errors for our test cases.
* elf32-nds32.c (nds32_elf_merge_private_bfd_data): Allow to link the
generic object.
* reloc.c: Add TLS relocations.
* libbfd.h: Regenerated.
* bfd-in2.h: Regenerated.
* elf32-nds32.h (struct section_id_list_t): New.
(elf32_nds32_lookup_section_id, elf32_nds32_check_relax_group,
elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model):
New prototypes.
(elf32_nds32_compute_jump_table_size, elf32_nds32_local_tlsdesc_gotent):
New macro.
(nds32_insertion_sort, bfd_elf32_nds32_set_target_option,
elf_nds32_link_hash_table): Updated.
* elf32-nds32.c (enum elf_nds32_tls_type): New.
(struct elf32_nds32_relax_group_t, struct relax_group_list_t): New.
(elf32_nds32_add_dynreloc, patch_tls_desc_to_ie, get_tls_type,
fls, ones32, list_insert, list_insert_sibling, dump_chain,
elf32_nds32_check_relax_group, elf32_nds32_lookup_section_id,
elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model): New functions.
(elf_nds32_obj_tdata): Add new fields.
(elf32_nds32_relax_group_ptr, nds32_elf_local_tlsdesc_gotent): New macros.
(nds32_elf_howto_table): Add TLS relocations.
(nds32_reloc_map): Likewise.
(nds32_elf_copy_indirect_symbol, nds32_elf_size_dynamic_sections,
nds32_elf_finish_dynamic_symbol, elf32_nds32_allocate_local_sym_info,
nds32_elf_relocate_section, bfd_elf32_nds32_set_target_option,
nds32_elf_check_relocs, allocate_dynrelocs): Updated.
(nds32_elf_relax_section): Call nds32_elf_unify_tls_model.
(dtpoff_base): Rename it to `gottpof' and then update it.
opcodes * nds32-asm.c (operand_fields): Remove the unused fields.
(nds32_opcodes): Remove the unused instructions.
* nds32-dis.c (nds32_ex9_info): Removed.
(nds32_parse_opcode): Updated.
(print_insn_nds32): Likewise.
* nds32-asm.c (config.h, stdlib.h, string.h): New includes.
(LEX_SET_FIELD, LEX_GET_FIELD): Update defines.
(nds32_asm_init, build_operand_hash_table, build_keyword_hash_table,
build_opcode_hash_table): New functions.
(nds32_keyword_table, nds32_keyword_count_table, nds32_field_table,
nds32_opcode_table): New.
(hw_ktabs): Declare it to a pointer rather than an array.
(build_hash_table): Removed.
* nds32-asm.h (enum): Add SYN_INPUT, SYN_OUTPUT, SYN_LOPT,
SYN_ROPT and upadte HW_GPR and HW_INT.
* nds32-dis.c (keywords): Remove const.
(match_field): New function.
(nds32_parse_opcode): Updated.
* disassemble.c (disassemble_init_for_target):
Add disassemble_init_nds32.
* nds32-dis.c (eum map_type): New.
(nds32_private_data): Likewise.
(get_mapping_symbol_type, is_mapping_symbol, nds32_symbol_is_valid,
nds32_add_opcode_hash_table, disassemble_init_nds32): New functions.
(print_insn_nds32): Updated.
* nds32-asm.c (parse_aext_reg): Add new parameter.
(parse_re, parse_re2, parse_aext_reg): Only reduced registers
are allowed to use.
All callers changed.
* nds32-asm.c (keyword_usr, keyword_sr): Updated.
(operand_fields): Add new fields.
(nds32_opcodes): Add new instructions.
(keyword_aridxi_mx): New keyword.
* nds32-asm.h (enum): Add NASM_ATTR_DSP_ISAEXT, HW_AEXT_ARIDXI_MX
and NASM_ATTR_ZOL.
(ALU2_1, ALU2_2, ALU2_3): New macros.
* nds32-dis.c (nds32_filter_unknown_insn): Updated.
