for the structure's type. All callers changed.
* valops.c (call_function_by_hand): Check REG_STRUCT_HAS_ADDR
for each structure argument rather than assuming it's either
true or false for all structure arguments.
* config/pa/tm-hppa.h (REG_STRUCT_HAS_ADDR): Depend only
on the length structure passed, not the compiler used.
* config/sparc/tm-sparc.h (REG_STRUCT_HAS_ADDR): Accept additional
argument for the structure's type.
(mips_pic): Change from int to enum mips_pic_level. Change all
uses (0 becomes NO_PIC, 2 becomes SVR4_PIC).
(load_address): Handle EMBEDDED_PIC.
(macro): Handle EMBEDDED_PIC in all PIC cases.
(md_parse_option): Accept -membedded-pic to use EMBEDDED_PIC. If
OBJ_ELF, accept -KPIC and -call_shared to use SVR4_PIC and accept
-non_shared to use NO_PIC (this is how the Irix 5 assembler
works). Do not permit -G with SVR4_PIC.
(s_abicalls): Warn if -G was used, and force -G 0.
(tc_gen_reloc): Set reloc->addend to 0 for a PC relative reloc for
anything but a.out, not just for ELF. For ECOFF, don't generate a
BFD_RELOC_16_PCREL_S2 reloc unless using EMBEDDED_PIC.
reloc, used in embedded PIC code.
(mips_adjust_reloc_in): Change sanity check to permit new reloc.
(mips_bfd_reloc_type_lookup): Turn BFD_RELOC_16_PCREL_S2 into
MIPS_R_PCREL16.
counting relocs. Set SEC_RELOC flag for any section which has
relocs.
* linker.c (_bfd_default_link_order): Handle bfd_data_link_order.
* linker.c (_bfd_generic_link_add_symbols): Just call
generic_link_add_symbols.
(_bfd_generic_link_add_symbols_collect): New function, like
_bfd_generic_link_add_symbols but also collect constructors and
destructors by name as collect2 does.
(generic_link_add_symbols): New function, like old
_bfd_generic_link_add_symbols but with collect argument.
(generic_link_add_object_symbols): Take collect argument.
(generic_link_check_archive_element_no_collect): New function.
(generic_link_check_archive_element_collect): New function.
(generic_link_check_archive_element): Take collect argument.
(generic_link_add_symbol_list): Take collect argument.
(_bfd_generic_link_add_one_symbol): Rename constructor argument to
collect.
* libbfd-in.h (_bfd_generic_link_add_symbols_collect): Declare.
* libbfd.h: Rebuilt.
for first character in an extended name.
(_bfd_write_archive_contents): If ar_padchar == '/', then use
"//" as the name of the special archive member holding the
extended name table.
support -Ur in the linker.
* linker.c (generic_link_add_symbol_list): Remove bitsize argument
from call to _bfd_generic_link_add_one_symbol.
(_bfd_generic_link_add_one_symbol): Remove bitsize argument.
Don't pass bitsize to constructor call back. Pass BFD_RELOC_CTOR
instead of bitsize to add_to_set call back.
(_bfd_generic_final_link): Account for link_order relocs when
allocating space for relocations. Handle them in link_order loop.
(_bfd_generic_reloc_link_order): New function.
(_bfd_default_link_order): If a reloc_link_order is seen here,
abort.
(_bfd_count_link_order_relocs): New function.
* libbfd-in.h (_bfd_generic_link_add_one_symbol): Remove bitsize
argument from declaration.
(_bfd_generic_reloc_link_order): Declare.
(_bfd_count_link_order_relocs): Declare.
* libbfd.h: Rebuilt.
* aoutx.h (aout_link_add_symbols): Remove bitsize argument from
call to _bfd_generic_link_add_one_symbol.
(NAME(aout,final_link)): Account for link_order relocs when
allocating space for relocations. Handle them after handling all
input BFDs.
(aout_link_reloc_link_order): New function.
* ecoff.c (ecoff_link_add_externals): Remove bitsize argument from
call to _bfd_generic_link_add_one_symbol.
(ecoff_bfd_final_link): Account for link_order relocs when
allocating space for relocations. Handle them in link_order loop.
(ecoff_link_write_external): Set the storage class of a defined
linker created symbol based on the section it is in. Correct
bfd_link_hash_weak case to use .sc rather than .st.
(ecoff_reloc_link_order): New function.
* coff-alpha.c (alpha_bfd_reloc_type_lookup): Handle
BFD_RELOC_CTOR.
* coff-mips.c (mips_bfd_reloc_type_lookup): Likewise.
* ldmain.c (add_to_set): Now takes reloc argument rather than
bitsize. Check config.build_constructors here. If an new hash
table entry is created, mark it as undefined.
(constructor_callback): No longer takes bitsize argument. Pass
BFD_RELOC_CTOR to ldctor_add_set_entry, but first make sure the
BFD backend supports it.
(reloc_overflow): Handle a NULL abfd argument.
(reloc_dangerous, unattached_reloc): Likewise.
* ldctor.c: Include ldmain.h.
(struct set_info): Change bitsize field to reloc.
(ldctor_add_set_entry): Now takes reloc argument rather than
bitsize. Don't bother to check config.build_constructors here.
(ldctor_build_sets): Get the size from the reloc howto. If
generating relocateable output, call lang_add_reloc rather than
lang_add_data.
* ldctor.h (ldctor_add_set_entry): Change declaration to use reloc
instead of bitsize.
* ldlang.h (statement_enum): Add lang_reloc_statement_enum.
(lang_reloc_statement_type): New structure.
(lang_statement_union_type): Add reloc_statement field.
(lang_add_reloc): Declare new function.
* ldlang.c (lang_for_each_statement_worker): Handle
lang_reloc_statement_enum.
(map_input_to_output_sections, print_statement): Likewise.
(lang_size_sections, lang_do_assignments): Likewise.
(print_reloc_statement): New function.
(lang_add_reloc): New function.
* ldwrite.c (build_link_order): Handle lang_reloc_statement_enum.
to add_to_set to reloc. Remove bitsize argument from constructor.
Comment that reloc_overflow, reloc_dangerous and unattached_reloc
must handle NULL pointers for reloc location.
(enum bfd_link_order_type): Add bfd_section_reloc_link_order and
bfd_symbol_reloc_link_order.
(struct bfd_link_order): Add reloc field to union.
(struct bfd_link_order_reloc): Define.
* alpha-tdep.c: Gobs of changes (many imported from mips-tdep) to
improve remote debugging efficiency. Also fixed problems with
doing function calls for programs with no entry points.
* infcmd.c (run_stack_dummy): Use CALL_DUMMY_ADDRESS instead of
entry_point_address.
* inferior.h (PC_IN_CALL_DUMMY): ditto.
* mdebugread.c (parse_symbol, parse_procedure, parse_external,
parse_lines): Pass section_offsets info to these routines so that
we can relocate symbol table entries upon readin.
* (psymtab_to_symtab_1): Set symtab->primary to tell
objfile_relocate to do relocations for our symbols.
* (ecoff_relocate_efi): New routine to relocate adr field of PDRs
(which hang off of the symbol table).
* Use prim_record_minimal_symbols_and_info instead of
prim_record_minimal_symbols to supply section info to make minimal
symbol relocations work.
* minsyms.c (prim_record_minimal_symbols_and_info): If section is
-1, try to deduce it from ms_type.
* objfiles.c (objfile_relocate): Use ALL_OBJFILE_SYMTABS where
appropriate. Handle relocation of MIPS_EFI symbols special. Also,
add code to relocate objfile->sections data structure.
* remote.c (get_offsets): Use new protocol message to acquire
section offsets from the target.
* (remote_wait): Get rid of relocation stuff. That's all handled
by objfile_relocate now.
* config/alpha/alpha-nw.mt (TM_FILE): Use tm-alphanw.h.
* config/alpha/tm-alpha.h: Define CALL_DUMMY_ADDRESS, and
VM_MIN_ADDRESS.
* config/alpha/tm-alphanw.h: DECR_PC_AFTER_BREAK=0, VM_MIN_ADDRESS=0.
improve remote debugging efficiency. Also fixed problems with
doing function calls for programs with no entry points.
* infcmd.c (run_stack_dummy): Use CALL_DUMMY_ADDRESS instead of
entry_point_address.
* inferior.h (PC_IN_CALL_DUMMY): ditto.
* mdebugread.c (parse_symbol, parse_procedure, parse_external,
parse_lines): Pass section_offsets info to these routines so that
we can relocate symbol table entries upon readin.
* (psymtab_to_symtab_1): Set symtab->primary to tell
objfile_relocate to do relocations for our symbols.
* (ecoff_relocate_efi): New routine to relocate adr field of PDRs
(which hang off of the symbol table).
* Use prim_record_minimal_symbols_and_info instead of
prim_record_minimal_symbols to supply section info to make minimal
symbol relocations work.
* minsyms.c (prim_record_minimal_symbols_and_info): If section is
-1, try to deduce it from ms_type.
* objfiles.c (objfile_relocate): Use ALL_OBJFILE_SYMTABS where
appropriate. Handle relocation of MIPS_EFI symbols special. Also,
add code to relocate objfile->sections data structure.
* remote.c (get_offsets): Use new protocol message to acquire
section offsets from the target.
* (remote_wait): Get rid of relocation stuff. That's all handled
by objfile_relocate now.
* config/alpha/alpha-nw.mt (TM_FILE): Use tm-alphanw.h.
* config/alpha/tm-alpha.h: Define CALL_DUMMY_ADDRESS, and
VM_MIN_ADDRESS.
* config/alpha/tm-alphanw.h: DECR_PC_AFTER_BREAK=0, VM_MIN_ADDRESS=0.
prototype. Change vardiff from int to bfd_signed_vma. Correct
binary search termination condition. When looking for same
section symbol in relocatable file, handle final symbol correctly.
(TM_CLIBS): Define to -lm, the simulator uses the sqrt() function.
* config/sparc/tm-sp64.h (FPS_REGNUM, CPS_REGNUM): Define (so
sparc-tdep.c compiles).
(TARGET_PTR_BIT): Must be a constant now, fix at 64.
som_section_from_subspace_index. Pass in a native SOM symbol.
For executables, iterate through the sections to find out
which contains the symbol's address rather than using the
symbol_info field. (symbol_info has a different meaning for
dynamicly linked executables.)
in output relocations.
(mark_symbols_used_in_relocations): New function. Mark symbols
used in output relocations with BSF_KEEP.
(filter_symbols): Do not strip symbols marked with BSF_KEEP.
(copy_object): Reorder actions. First setup sections, then
build the output symbol table, then copy the section contents.
find, to locate TM_FILE, XM_FILE, and NAT_FILE. This is faster
and means that these filenames no longer need be unique across all
the config/* directories.
* configure.in: Put the config/*/ into TM_FILE, etc.
* m68k-stub.c (computeSignal): Return SIGFPE, not SIGURG, for chk
and trapv exceptions.
* target.h (struct section_table), objfiles.h (struct obj_section):
Change name of field sec_ptr to the_bfd_section. More mnemonic
and avoids the (sort of, for the ptx compiler) name clash with
the name of the typedef.
* exec.c, xcoffexec.c, sparc-tdep.c, rs6000-nat.c, osfsolib.c,
solib.c, irix5-nat.c, objfiles.c, remote.c: Change users.
* utils.c: Include readline.h.
* Makefile.in (utils.o): Add dependency.
* remote.c (getpkt): Add support for run-length encoding.
