PR ld/15365
* layout.cc (Layout::finalize): Make __ehdr_start STV_HIDDEN.
ld/
PR ld/15365
* emultempl/elf32.em (gld${EMULATION_NAME}_before_allocation):
Restrict __ehdr_start's export class to no less than STV_HIDDEN.
ld/testsuite/
PR ld/15365
* ld-elf/ehdr_start.d: Expect __ehdr_start to be STB_LOCAL.
* ld-mips-elf/ehdr_start-1.nd: New test.
* ld-mips-elf/ehdr_start-2.nd: New test.
* ld-mips-elf/ehdr_start-1.ld: New test linker script.
* ld-mips-elf/ehdr_start-2.ld: New test linker script.
* ld-mips-elf/ehdr_start-new.s: New test source.
* ld-mips-elf/ehdr_start-o32.s: New test source.
* ld-mips-elf/mips-elf.exp: Run the new tests.
* config.bfd (msp430): Define targ_selvecs.
* configure.in: Add bfd_elf32_msp430_ti_vec.
* cpu-msp430.c: Add some more MSP430 machine numbers.
* elf32-msp430.c Add support for MSP430X relocations.
Add support for TI compiler generated relocations.
Add support for sym_diff relocations.
Add support for relaxing out of range short branches into long
branches.
Add support for MSP430 attribute section.
* reloc.c: Add MSP430X relocations.
* targets.c: Add bfd_elf32_msp430_ti_vec.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* libbfd.h: Regenerate.
* readelf.c: Add support for MSP430X architecture.
* readelf.exp: Expect -wi test to fail for the MSP430.
* config/tc-msp430.c: Add support for the MSP430X architecture.
Add code to insert a NOP instruction after any instruction that
might change the interrupt state.
Add support for the LARGE memory model.
Add code to initialise the .MSP430.attributes section.
* config/tc-msp430.h: Add support for the MSP430X architecture.
* doc/c-msp430.texi: Document the new -mL and -mN command line
options.
* NEWS: Mention support for the MSP430X architecture.
* gas/all/gas.exp: Skip the DIFF1 test for the MSP430.
Expect the FORWARD test to pass for the MSP430.
Skip the REDEF tests for the MSP430.
Expect the 930509A test to fail for the MSP430.
* gas/all/sleb128-4.d: Skip for the MSP430.
* gas/elf/elf.exp: Set target_machine to msp430 for the MSP430.
Skip the EHOPT0 test for the MSP430.
Skip the REDEF and EQU-RELOC tests for the MSP430.
* gas/elf/section2.e-msp430: New file.
* gas/lns/lns-big-delta.d: Remove expectation of 20-bit
addresses.
* gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430.
* gas/msp430/msp430x.s: New test.
* gas/msp430/msp430x.d: Expected disassembly.
* gas/msp430/msp430.exp: Run new test.
* gas/msp430/opcode.d: Update expected disassembly.
* msp430.h: Add MSP430X relocs.
Add some more MSP430 machine numbers.
Add values used by .MSP430.attributes section.
* msp430.h: Add patterns for MSP430X instructions.
* Makefile.am: Add emsp430X.c
* Makefine.in: Regenerate.
* configure.tgt (msp430): Add msp430X emulation.
* ldmain.c (multiple_definition): Only disable relaxation if it
was enabled by the user.
* ldmain.h (RELAXATION_ENABLED_BY_USER): New macro.
* emulparams/msp430all.sh: Add support for MSP430X.
* emultempl/generic.em: (before_parse): Enable relaxation for the
MSP430.
* scripttempl/msp430.sc: Reorganize sections. Add .rodata
section.
* scripttempl/msp430_3.sc: Likewise.
* NEWS: Mention support for MSP430X.
* ld-elf/flags1.d: Expect this test to pass on the MSP430.
* ld-elf/init-fini-arrays.d: Expect this test to fail on the
MSP430.
* ld-elf/merge.d: Expect this test to pass on the MSP430.
* ld-elf/sec64k.exp: Skip these tests for the MSP430.
* ld-gc/pr13683.d: Expect this test to fail on the MSP430.
* ld-srec/srec.exp: Expect these tests to fail on the MSP430.
* ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to
fail on the MSP430.
* msp430-dis.c: Add support for MSP430X instructions.
* config.bfd: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*.
binutils/testsuite/
* lib/binutils-common.exp (is_elf_format): Also exclude
*-*-linux*ecoff*.
gas/
* configure.tgt: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*.
ld/
* configure.tgt: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*. Update the `sed' pattern used to convert
from alpha*-*-linux-* to alpha*-*-linux*ecoff*.
This patch enables x32 for x86_64-*-elf* for embedded target and disables
rex tests since it uses '/' as prefix separator which is `\' for
x86_64-*-elf*.
bfd/
* config.bfd (targ_selvecs): Add bfd_elf32_x86_64_vec for
x86_64-*-elf*.
gas/testsuite/
* gas/i386/rex.d: Skip x86_64-*-elf*.
* gas/i386/ilp32/rex.d: Likewise.
ld/
* configure.tgt (targ_extra_emuls): Adds elf32_x86_64 for
x86_64-*-elf*.
(targ_extra_libpath): Likewise.
(tdir_elf_i386): Replace x86_64 with i386 for x86_64-*-elf*.
* configure.tgt: Add x86_64-*-cygwin* as valid target.
* emultempl/pep.em: Handle different requirements for Cygwin in terms
of start addresses for executables and DLLs, based on memory model in
http://cygwin.com/ml/cygwin-developers/2013-02/msg00027.html
ld/
* ldlang.c (lang_size_sections_1): When given an lma_region align
LMA as per VMA only if lma_region is the same as region.
ld/testsuite/
* ld-scripts/rgn-at6.s, * ld-scripts/rgn-at6.t, * ld-scripts/rgn-at6.d,
* ld-scripts/rgn-at7.t, * ld-scripts/rgn-at7.d: New tests.
argument.
(%union): Add new type bfd_vma as vma.
(VMA): New rule.
(opt_base): Use VMA instead of NUMBER rule to evaluate value.
(def_file_print): Use bfd's fprintf_vma to output base-address.
The "new" dtags options have been around for 14+ years now, so for Linux
and GNU targets, enable them by default.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The "new" dtags options have been around for 14+ years, so there
shouldn't be a need to generate both new & old tags anymore.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* metag.h: New file.
* dis-asm.h (print_insn_metag): New declaration.
* metag.h: New file.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.in: Add Meta.
* disassemble.c: Add Meta support.
* metag-dis.c: New file.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* archures.c (bfd_mach_metag): New.
* bfd-in2.h: Regenerate.
* config.bfd: Add Meta.
* configure: Regenerate.
* configure.in: Add Meta.
* cpu-metag.c: New file.
* elf-bfd.h: Add Meta.
* elf32-metag.c: New file.
* elf32-metag.h: New file.
* libbfd.h: Regenerate.
* reloc.c: Add Meta relocations.
* targets.c: Add Meta.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* config/tc-metag.c: New file.
* config/tc-metag.h: New file.
* configure.tgt: Add Meta.
* doc/Makefile.am: Add Meta.
* doc/Makefile.in: Regenerate.
* doc/all.texi: Add Meta.
* doc/as.texiinfo: Document Meta options.
* doc/c-metag.texi: New file.
* gas/metag/labelarithmetic.d: New file.
* gas/metag/labelarithmetic.s: New file.
* gas/metag/metacore12.d: New file.
* gas/metag/metacore12.s: New file.
* gas/metag/metacore21-invalid.l: New file.
* gas/metag/metacore21-invalid.s: New file.
* gas/metag/metacore21.d: New file.
* gas/metag/metacore21.s: New file.
* gas/metag/metacore21ext.d: New file.
* gas/metag/metacore21ext.s: New file.
* gas/metag/metadsp21-invalid.l: New file.
* gas/metag/metadsp21-invalid.s: New file.
* gas/metag/metadsp21.d: New file.
* gas/metag/metadsp21.s: New file.
* gas/metag/metadsp21ext.d: New file.
* gas/metag/metadsp21ext.s: New file.
* gas/metag/metafpu21.d: New file.
* gas/metag/metafpu21.s: New file.
* gas/metag/metafpu21ext.d: New file.
* gas/metag/metafpu21ext.s: New file.
* gas/metag/metag.exp: New file.
* gas/metag/tls.d: New file.
* gas/metag/tls.s: New file.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* configure.tgt: Add Meta.
* emulparams/elf32metag.sh: New file.
* emultempl/metagelf.em: New file.
* ld-elf/merge.d: Mark Meta as xfail.
* ld-gc/start.d: Skip this test on Meta.
* ld-gc/personality.d: Skip this test on Meta.
* ld-metag/external.s: New file.
* ld-metag/metag.exp: New file.
* ld-metag/pcrel.d: New file.
* ld-metag/pcrel.s: New file.
* ld-metag/shared.d: New file.
* ld-metag/shared.r: New file.
* ld-metag/shared.s: New file.
* ld-metag/stub.d: New file.
* ld-metag/stub.s: New file.
* ld-metag/stub_pic_app.d: New file.
* ld-metag/stub_pic_app.r: New file.
* ld-metag/stub_pic_app.s: New file.
* ld-metag/stub_pic_shared.d: New file.
* ld-metag/stub_pic_shared.s: New file.
* ld-metag/stub_shared.d: New file.
* ld-metag/stub_shared.r: New file.
* ld-metag/stub_shared.s: New file.
* binutils/readelf.c: (guess_is_rela): Add EM_METAG.
(dump_relocations): Add EM_METAG.
(get_machine_name): Correct case for Meta.
(is_32bit_abs_reloc): Add support for Meta ADDR32 reloc.
(is_none_reloc): Add support for Meta NONE reloc.
Correct ordering of M68HC11 entry.
* doc/binutils.texi: Fix ordering of top level nodes.
Replace erroneous uses of @itemx with @item.
* bfd.texinfo: Replace @ with @@ when it is part of the text.
* bfd-in2.h: Add support for MIPS r5900
* config.bfd: Add support for Sony Playstation 2
* cpu-mips.c: Add support for MIPS r5900
* elfxx-mips.c: Add support for MIPS r5900 (extension of r4000)
* config/tc-mips.c: Add support for MIPS r5900
Add M_LQ_AB and M_SQ_AB to support large values for instructions lq and sq.
* config/tc-mips.c (can_swap_branch_p, get_append_method): Detect some conditional short loops to fix a bug on the r5900 by NOP in the branch delay slot.
* config/tc-mips.c (M_MUL): Support 3 operands in multu on r5900.
* config/tc-mips.c (M_TRUNCWS): Support trunc.w.s on r5900 in MIPS ISA I.
* config/tc-mips.c (s_mipsset): Force 32 bit floating point on r5900.
* configure.in: Detect CPU type when target string contains r5900 (e.g. mips64r5900el-linux-gnu).
* config/tc-mips.c (mips_ip): Check parameter range of instructions mfps and mtps on r5900.
* elf/mips.h: Add MIPS machine variant number for r5900 which is compatible with old Playstation 2 software.
* opcode/mips.h: Add support for r5900 instructions including lq and sq.
* configure.tgt: Support ELF files for Sony Playstation 2 (for ps2dev and ps2sdk).
* emulparams/elf32lr5900n32.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI n32.
* emulparams/elf32lr5900.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI o32.
* Makefile.am: Add linker scripts for Sony Playstation 2 ELF files.
* opcodes/mips-dis.c: Add names for CP0 registers of r5900.
* opcodes/mips-opc.c: Add M_SQ_AB and M_LQ_AB to support larger range for instructions sq and lq.
* opcodes/mips-opc.c: Add support for MIPS r5900 CPU.
Add support for 128 bit MMI (Multimedia Instructions).
Add support for EE instructions (Emotion Engine).
Disable unsupported floating point instructions (64 bit and undefined compare operations).
Enable instructions of MIPS ISA IV which are supported by r5900.
Disable 64 bit co processor instructions.
Disable 64 bit multiplication and division instructions.
Disable instructions for co-processor 2 and 3, because these are not supported (preparation for later VU0 support (Vector Unit)).
Disable cvt.w.s because this behaves like trunc.w.s and the correct execution can't be ensured on r5900.
Add trunc.w.s using the opcode encoding of cvt.w.s on r5900. This will confuse less developers and compilers.
binutils/
2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
* version.c (print_version): Update copyright year to 2013.
gas/
2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
* as.c (parse_args): Update copyright year to 2013.
ld/
2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
* ldver.c (ldversion): Update copyright year to 2013.
opcodes/
2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (process_copyright): Update copyright year to 2013.
* ldexp.h (struct ldexp_control): Add "assign_name".
* ldexp.c (fold_name <NAME>): Compare and clear assign_name on match.
(exp_fold_tree_1): Remove existing code testing for self assignment.
Instead set and test expld.assign_name.
* ldlang.c (scan_for_self_assignment): Delete.
(print_assignment): Instead set and test expld.assign_name.
* emulparams/elf_nacl.sh (nacl_rodata_addr): New shell function.
(RODATA_ADDR, SHLIB_RODATA_ADDR): Use it to base the calculation
on SEGMENT_START("text-segment", ...) rather than ... alone.
* Makefile.am (earmelf_nacl.c, earmelfb_nacl.c): Add missing
dependency on $(srcdir)/emulparams/elf_nacl.sh.
* Makefile.in: Regenerate.
ld/
PR ld/14915
* emultempl/elf32.em (gld${EMULATION_NAME}_after_open): Also
check DT_NEEDED entries when creating shared object with
--copy-dt-needed-entries.
ld/testsuite/
PR ld/14915
* ld-elf/shared.exp (build_tests): Test --add-needed,
--copy-dt-needed-entries, --no-add-needed and
--no-copy-dt-needed-entries with -shared.
Add tests for --no-add-needed and --no-copy-dt-needed-entries
with -shared.
ld/
PR ld/14904
* ldmain.c (main): Don't check plugin_load_plugins return.
* lexsup.c (parse_args): Don't check plugin_opt_plugin return.
* plugin.c (dlerror): New. Defined if HAVE_DLFCN_H isn't
defined.
(plugin_opt_plugin): Change return type to void. Stop on
dlopen error and report error with dlerror ().
(plugin_load_plugins): Change return type to void. Stop on
dlsym error and report error with dlerror (). Don't use
set_plugin_error.
(plugin_call_cleanup): Issue an error for each plugin.
* plugin.h (plugin_opt_plugin): Change return type to void.
(plugin_load_plugins): Likewise.
ld/testsuite/
PR ld/14904
* ld-plugin/plugin-2.d: Update expected error message.
* ld-plugin/plugin-4.d: Likewise.
* ld.h (ld_config_type): New flag member separate_code.
* emultempl/elf32.em
(gld${EMULATION_NAME}_before_parse): Set it based on $SEPARATE_CODE.
* ldlang.c (ldlang_override_segment_assignment): If it's set, then
always return TRUE when SEC_CODE differs between the sections.
* elf32-rx.c (describe_flags): New function. Returns a buffer
containing a description of the E_FLAG_RX_... values set.
(rx_elf_merge_private_bfd_data): Use it.
(rx_elf_print_private_bfd_data): Likewise.
(elf32_rx_machine): Skip EF_RX_CPU_RX check.
(elf32_rx_special_sections): Define.
(elf_backend_special_sections): Define.
2012-11-09 Nick Clifton <nickc@redhat.com>
* readelf.c (get_machine_flags): Add support for E_FLAG_RX_ABI.
2012-11-09 Nick Clifton <nickc@redhat.com>
* config/obj-elf.c (obj_elf_change_section): Allow init array
sections to have the SHF_EXECINSTR attribute for the RX target.
* config/tc-rx.c (elf_flags): Initialise with E_FLAG_RX_ABI.
(enum options): Add OPTION_USES_GCC_ABI and OPTION_USES_RX_ABI.
(md_longopts): Add -mgcc-abi and -mrx-abi.
(md_parse_option): Add support for OPTION_USES_GCC_ABI and
OPTION_USES_RX_ABI.
* doc/as.texinfo (RX Options): Add mention of remaining RX
options.
* doc/c-rx.texi: Document -mgcc-abi and -mrx-abi.
2012-11-09 Nick Clifton <nickc@redhat.com>
* rx.h (EF_RX_CPU_RX): Add comment.
(E_FLAG_RX_ABI): Define.
2012-11-09 Nick Clifton <nickc@redhat.com>
* emultempl/rxelf.em (no_flag_mismatch_warnings): Initialise to
true.
(PARSE_AND_LIST_LONGOPTS): Add flag-mismatch-warnings.
(PARSE_AND_LIST_ARG_CASES): Add support for
--flag-mismatch-warnings.
2012-10-18 Kai Tietz <ktietz@redhat.com>
PR binutils/14067
* coff-i386.c (bfd_target): Add section flag SEC_EXCLUDE.
Allow BFD_COMPRESS and BFD_DECOMPRESS flags.
* coff-x86_64.c: Likewise.
* coffcode.h (DOT_ZDEBUG): New define.
(sec_to_styp_flags): Check for .zdebug.
(styp_to_sec_flags): Likewise.
* coffgen.c (make_a_section): Handle .debug_* section
compression/decompression flags.
* cofflink.c (mark_relocs): Ignore relocations
for a section, which isn't marked as used.
(_bfd_coff_link_input_bfd): Add support of compressed
debug sections.
* compress.c (decompress_contents): Loop as long
as there is input available and there is room for
output.
* bfd/pe-arm.c: Add .zdebug_ partial match entry.
* pe-i386.c: Likewise.
* pe-x86_64.c: Likewise.
* peXXigen.c (_bfd_XXi_swap_aouthdr_out): Don't clear all
data-directories as this might destroy content.
* coff-i386.c (_bfd_generic_find_nearest_line_discriminator):
define as coff_find_nearest_line_discriminator.
* libcoff-in.h (coff_find_nearest_line_discriminator): New
* libcoff.h: Regenerated.
* coff-x86_64.c: Likewise.
* coffgen.c (coff_find_nearest_line_discriminator): New function.
prototype.
ChangeLog binutils
2012-10-18 Kai Tietz <ktietz@redhat.com>
* objdump.c (dump_bfd): Call dump headers after
call of slurp_symtab.
ChangeLog ld
2012-10-18 Kai Tietz <ktietz@redhat.com>
PR binutils/14067
* NEWS: Menition new feature.
* scripttempl/pep.sc: Add zdebug sections.
* scripttempl/pe.sc: L
orphan sections to .data and .bss output sections, not just .text.
When giving up on finding a suitable output section, attach to any
output section other than .MMIX.reg_contents, if it exists.
* scripttempl/mmo.sc: Move output debug sections to just before
.MMIX.reg_contents. Add .gnu.attributes. Add new . = . NOP
assignments and move end-of-section provide-symbols after them
to force the end-of-section symbols to the address after orphan
placement. Add SORT_NONE to .init and .fini sections.
* emulparams/elf32bmip.sh: Make _gp hidden.
* emulparams/elf32bmipn32-defs.sh: Likewise.
* emulparams/elf32mipswindiss.sh: Likewise.
* scripttempl/mips.sc: Likewise.
ld/testsuite/
* ld-mips-elf/rel32-o32.d: Adjust section VMAs after the removal
of _gp from the global scope.
* ld-mips-elf/rel32-n32.d: Likewise.
* ld-mips-elf/rel64.d: Likewise.
2012-08-01 James Lemke <jwlemke@codesourcery.com>
* gas/dwarf2dbg.c (out_set_addr): Allow for non-constant value of
DWARF2_LINE_MIN_INSN_LENGTH
* gas/config/tc-ppc.c (ppc_dwarf2_line_min_insn_length): Declare
and initialize.
(md_apply_fix): Branch addr can be a multiple of 2 or 4.
* gas/config/tc-ppc.h (DWARF2_LINE_MIN_INSN_LENGTH): Now a
variable reference.
gas/testsuite/ChangeLog:
2012-08-01 James Lemke <jwlemke@codesourcery.com>
* gas/cfi/cfi-ppc-1.d: Allow for code alignment of 2 or 4.
ld/ChangeLog:
2012-08-01 James Lemke <jwlemke@codesourcery.com>
* ld/testsuite/ld-gc/pr13683.d: XFAIL for powerpc*-*-eabivle.
Move the package name/version from AM_INIT_AUTOMAKE to AC_INIT per recent
autotools guidelines. We use recent versions of both, so it shouldn't be
a problem.
This sets PACKAGE_xxx variables correctly, and makes the output of:
./configure --version
actually useful:
bfd configure 2.22.52
Changing the other dirs to use AC_INIT would require a bit of m4 trickery
that I don't feel like getting into, and they all use BFD_VERSION anyways,
so there isn't much point.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* elf64-s390.c: Include elf-s390-common.c.
(R_390_IRELATIVE): New reloc.
(elf_s390_reloc_type_lookup): Support R_390_IRELATIVE.
(RELA_ENTRY_SIZE): New macro.
(elf_s390_link_hash_entry): New fields ifunc_resolver_address and
*ifunc_resolver_section.
(struct plt_entry): New struct.
(struct elf_s390_obj_tdata): New field local_plt.
(elf_s390_local_plt): New macro.
(struct elf_s390_link_hash_table): New field irelifunc.
(ELF64): New macro.
(link_hash_newfunc): Initialize new fields.
(elf_s390_check_relocs): Handle IFUNC symbols.
(elf_s390_adjust_dynamic_symbol): Don't do anything for IFUNC
symbols.
(allocate_dynrelocs): Call s390_elf_allocate_ifunc_dyn_relocs for
IFUNC symbols.
(elf_s390_size_dynamic_sections): Handle IFUNC symbols.
(elf_s390_relocate_section): Likewise.
(elf_s390_finish_dynamic_symbol): Likewise.
(elf_s390_finish_dynamic_sections): Handle local IFUNC symbols.
(elf_s390_finish_ifunc_symbol): New function.
(elf_s390_gc_sweep_hook): Handle local plt entries.
(elf_backend_add_symbol_hook): Define.
* elf32-s390.c: See elf64-s390.c changes.
* elf-s390-common.c: New file.
* bfd-in2.h (BFD_RELOC_390_IRELATIVE): New enum field.
* libbfd.h (BFD_RELOC_390_IRELATIVE): New entry for
BFD_RELOC_390_IRELATIVE.
* reloc.c (BFD_RELOC_390_IRELATIVE): Document new relocation.
2012-07-13 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* elf/s390.h (START_RELOC_NUMBERS): Define R_390_IRELATIVE reloc.
2012-07-13 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* emulparams/elf_s390.sh (IREL_IN_PLT): Define.
* emulparams/elf64_s390.sh (IREL_IN_PLT): Define.
* elf.c (assign_file_positions_for_non_load_sections): Define
__ehdr_start symbol if it's referenced and there's a PT_LOAD
segment that covers both the file and program headers.
ld/
* NEWS: Mention __ehdr_start.
ld/testsuite/
* ld-elf/ehdr_start.s: New file.
* ld-elf/ehdr_start.d: New file.
"section_relative_symbol" field to "update_dot".
* ldlang.c: Update all uses.
(strip_excluded_output_sections): Don't test update_dot_tree here..
(lang_leave_overlay): ..set update_dot here.