Add support for system registers introduced in ARMv8.3
for pointer authentication.
opcodes/
2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com>
* aarch64-opc.c (aarch64_sys_regs): Add apiakeylo_el1, apiakeyhi_el1,
apibkeylo_el1, apibkeyhi_el1, apdakeylo_el1, apdakeyhi_el1,
apdbkeylo_el1, apdbkeyhi_el1, apgakeylo_el1 and apgakeyhi_el1.
(aarch64_sys_reg_supported_p): Add feature test for new registers.
gas/
2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com>
* testsuite/gas/aarch64/sysreg-3.s: New.
* testsuite/gas/aarch64/sysreg-3.d: New.
* testsuite/gas/aarch64/illegal-sysreg-3.l: New.
* testsuite/gas/aarch64/illegal-sysreg-3.d: New.
This patch adds support for a subset of the ARMv8.3 pointer authentication
instructions: XPACLRI, PACIA1716, PACIB1716, AUTIA1716, AUTIA1716, PACIAZ,
PACIASP, PACIBZ, PACISP, AUTIAZ, AUTIASP, AUTIBZ, AUTIBSP.
These are aliases to HINT #0x7, HINT #0x8, HINT #0xa, HINT #0xc, HINT #0xe,
HINT #0x18, HINT #0x19, ..., HINT #0x1f respectively.
For more details about pointer authentication in ARMv8.3 see
https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions
opcodes/
2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com>
* aarch64-tbl.h (aarch64_feature_v8_3, ARMV8_3, V8_3_INSN): New.
(arch64_opcode_table): Add xpaclri, pacia1716, pacib1716, autia1716,
autib1716, paciaz, paciasp, pacibz, pacibsp, autiaz, autiasp, autibz,
autibsp.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
gas/
2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com>
* testsuite/gas/aarch64/system-3.s: New.
* testsuite/gas/aarch64/system-3.d: New.
* testsuite/gas/aarch64/system.d: Update expected output.
ARMv8.3 can be selected with -march=armv8.3-a command line option.
An overview of the ARMv8.3 architecture extension is at
https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions
gas/
2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com>
* config/tc-aarch64.c (aarch64_archs): Add "armv8.3-a".
* doc/c-aarch64.texi (-march): Likewise.
include/
2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_3): Define.
(AARCH64_ARCH_V8_3): Define.
(AARCH64_ARCH_V8_1, AARCH64_ARCH_V8_2): Simplify.
Since Bad_Opcode and FGRPd9_2 were the same in i386-dis.c, all
Bad_Opcode entries in float_reg were displaced as FGRPd9_2. This
patch adds an entry for Bad_Opcode in fgrps to avoid treating it
as FGRPd9_2.
gas/
PR binutils/20775
* testsuite/gas/i386/i386.exp: Run fpu-bad.
* testsuite/gas/i386/fpu-bad.d: New file.
* testsuite/gas/i386/fpu-bad.s: Likewise.
opcodes/
PR binutils/20775
* i386-dis.c (FGRPd9_2): Replace 0 with 1.
(FGRPd9_4): Replace 1 with 2.
(FGRPd9_5): Replace 2 with 3.
(FGRPd9_6): Replace 3 with 4.
(FGRPd9_7): Replace 4 with 5.
(FGRPda_5): Replace 5 with 6.
(FGRPdb_4): Replace 6 with 7.
(FGRPde_3): Replace 7 with 8.
(FGRPdf_4): Replace 8 with 9.
(fgrps): Add an entry for Bad_Opcode.
When we match against an address type operand within an instruction it
is important that we match exactly the right address type operand early
on, during the opcode selection phase. If we wait until the operand
insertion phase to check that we have the correct address operand, then
it is too late to select an alternative opcode. This becomes important
only when we have multiple opcodes with the same mnemonic, and operand
lists that differ only in the type of the address operands.
This commit fixes this issue, and adds some example instructions that
require this issue to be fixed (the instructions are identical except
for the address type operand).
gas/ChangeLog:
* config/tc-arc.c (find_opcode_match): Use insert function to
validate matching address type operands.
* testsuite/gas/arc/nps400-10.d: New file.
* testsuite/gas/arc/nps400-10.s: New file.
opcodes/ChangeLog:
* arc-opc.c (arc_flag_operands): Add F_DI14.
(arc_flag_classes): Add C_DI14.
* arc-nps400-tbl.h: Add new exc instructions.
Since the bpp instruction has been added the 16 bit wide pc relative
relocs might occur at offset 2 as well at offset 4 in an instruction.
With this patch the different adjustment is passed from
md_gather_operand to md_apply_fix via fx_pcrel_adjust field in the fix
data structure.
No regressions on s390x.
gas/ChangeLog:
2016-11-04 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (md_gather_operands): Set fx_pcrel_adjust.
(md_apply_fix): Use/Set fx_pcrel_adjust.
* testsuite/gas/s390/zarch-zEC12.d: Add bpp reloc test pattern.
* testsuite/gas/s390/zarch-zEC12.s: Add bpp reloc test.
2016-11-04 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (cortex-m33): Declare new processor.
* doc/c-arm.texi (-mcpu ARM command line option): Document new
Cortex-M33 processor.
* NEWS: Mention ARM Cortex-M33 support.
2016-11-04 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (cortex-m23): Declare new processor.
* doc/c-arm.texi (-mcpu ARM command line option): Document new
Cortex-M23 processor.
* NEWS: Mention ARM Cortex-M23 support.
The long immediate operand chosen for one of the ldbit tests is
equivalent to a small negative value that would fit inside an s9
operand, leading to the assembler to choose an unexpected (but
legitimate) encoding of the instruction on 32-bit systems, and
therefore causing the test to fail. This commit fixes the test by
changing the offending limm value so that it can no longer be
interpreted as an s9 operand.
gas/ChangeLog:
* testsuite/gas/arc/nps400-6.s: Change ldbit tests so that
limm operands are out of the range of an s9, in order to fix
the test.
* testsuite/gas/arc/nps400-6.d: Updated to match new expected
output.
The current handling for arc instructions longer than 32-bits is all
handled as a special case in both the assembler and disassembler.
The problem with this approach is that it leads to code duplication,
selecting a long instruction is exactly the same process as selecting a
short instruction, except over more bits, in both cases we select based
on bit comparison, and initial operand insertion and extraction.
This commit unifies both the long and short instruction worlds,
converting the core opcodes library from being largely 32-bit focused,
to being largely 64-bit focused.
The changes are, on the whole, not too much. There's obviously a lot of
type changes but otherwise the bulk of the code just works. Most of the
actual functional changes are to code that previously handled the longer
48 or 64 bit instructions. The insert/extract handlers for these have
now been brought into line with the short instruction insert/extract
handlers.
All of the special case handling code that was previously added has now
been removed again. Overall, this commit reduces the amount of code in
the arc assembler and disassembler.
gas/ChangeLog:
* config/tc-arc.c (struct arc_insn): Change type of insn field.
(md_number_to_chars_midend): Support 6- and 8-byte values.
(emit_insn0): Update debug output.
(find_opcode_match): Likewise.
(build_fake_opcode_hash_entry): Delete.
(find_special_case_long_opcode): Delete.
(find_special_case): Remove long format special case handling.
(insert_operand): Change instruction type and update debug print
format.
(assemble_insn): Change instruction type, update debug print
formats, and remove unneeded assert.
include/ChangeLog:
* opcode/arc.h (struct arc_opcode): Change type of opcode and mask
fields.
(struct arc_long_opcode): Delete.
(struct arc_operand): Change types for insert and extract
handlers.
opcodes/ChangeLog:
* arc-dis.c (struct arc_operand_iterator): Remove all fields
relating to long instruction processing, add new limm field.
(OPCODE): Rename to...
(OPCODE_32BIT_INSN): ...this.
(OPCODE_AC): Delete.
(skip_this_opcode): Handle different instruction lengths, update
macro name.
(special_flag_p): Update parameter type.
(find_format_from_table): Update for more instruction lengths.
(find_format_long_instructions): Delete.
(find_format): Update for more instruction lengths.
(arc_insn_length): Likewise.
(extract_operand_value): Update for more instruction lengths.
(operand_iterator_next): Remove code relating to long
instructions.
(arc_opcode_to_insn_type): New function.
(print_insn_arc):Update for more instructions lengths.
* arc-ext.c (extInstruction_t): Change argument type.
* arc-ext.h (extInstruction_t): Change argument type.
* arc-fxi.h: Change type unsigned to unsigned long long
extensively throughout.
* arc-nps400-tbl.h: Add long instructions taken from
arc_long_opcodes table in arc-opc.c.
* arc-opc.c: Update parameter types on insert/extract handlers.
(arc_long_opcodes): Delete.
(arc_num_long_opcodes): Delete.
(arc_opcode_len): Update for more instruction lengths.
In preparation for moving to a world where arc instructions can be 2, 4,
6, or 8 bytes in length, replace the ARC_SHORT macro (which is either
true of false) with an arc_opcode_len function that returns a length in
bytes.
There should be no functional change after this commit.
gas/ChangeLog:
* config/tc-arc.c (assemble_insn): Replace use of ARC_SHORT with
arc_opcode_len.
include/ChangeLog:
* opcode/arc.h (arc_opcode_len): Declare.
(ARC_SHORT): Delete.
opcodes/ChangeLog:
* arc-dis.c (find_format_from_table): Replace use of ARC_SHORT
with arc_opcode_len.
(find_format_long_instructions): Likewise.
* arc-opc.c (arc_opcode_len): New function.
When assembling an instruction replace the short_insn boolean flag with
an integer field for holding the instruction length. This is in
preparation for moving to a world where instructions can be 2, 4, 6, or
8 bytes in length.
gas/ChangeLog:
* config/tc-arc.c (struct arc_insn): Replace short_insn flag with
len field.
(apply_fixups): Update to use len field.
(emit_insn0): Simplify code, making use of len field.
(md_convert_frag): Update to use len field.
(assemble_insn): Update to use len field.
This adds an option for the Qualcomm falkor core, the corresponding
gcc patch is here:
https://gcc.gnu.org/ml/gcc-patches/2016-11/msg00262.html
This was tested with aarch64 and armhf builds and make check and also
by building and running SPEC2006.
* config/tc-aarch64.c (aarch64_cpus): Add falkor.
* config/tc-arm.c (arm_cpus): Likewise.
* doc/c-aarch64.texi: Likewise.
* doc/c-arm.texi: Likewise.
In the ARC assembler, when a cpu type is specified using the .cpu
directive, we rely on the bfd list of arc machine types in order to
validate the cpu name passed in.
This validation is only used in order to check that the cpu type passed
to the .cpu directive matches any machine type selected earlier on the
command line. Once that initial check has passed a full check is
performed using the assemblers internal list of know cpu types.
The problem is that the assembler knows about more cpu types than bfd,
some cpu types known by the assembler are actually aliases for a base
cpu type plus a specific set of assembler extensions. One such example
is NPS400, though more could be added later.
This commit removes the need for the assembler to use the bfd list of
machine types for validation. Instead the error checking, to ensure
that any value passed to a '.cpu' directive matches any earlier command
line selection, is moved into the function arc_select_cpu.
I have taken the opportunity to bundle the 4 separate static globals
that describe the currently selected machine type into a single
structure (called selected_cpu).
gas/ChangeLog:
* config/tc-arc.c (arc_target): Delete.
(arc_target_name): Delete.
(arc_features): Delete.
(arc_mach_type): Delete.
(mach_type_specified_p): Delete.
(enum mach_selection_type): New enum.
(mach_selection_mode): New static global.
(selected_cpu): New static global.
(arc_eflag): Rename to ...
(arc_initial_eflag): ...this, and make const.
(arc_select_cpu): Update comment, new parameter, check how
previous machine type selection was made, and record this
selection. Use selected_cpu instead of old globals.
(arc_option): Remove use of arc_get_mach, instead use
arc_select_cpu to validate machine type selection. Use
selected_cpu over old globals.
(allocate_tok): Use selected_cpu over old globals.
(find_opcode_match): Likewise.
(assemble_tokens): Likewise.
(arc_cons_fix_new): Likewise.
(arc_extinsn): Likewise.
(arc_extcorereg): Likewise.
(md_begin): Update default machine type selection, use
selected_cpu over old globals.
(md_parse_option): Update machine type selection option handling,
use selected_cpu over old globals.
* testsuite/gas/arc/nps400-0.s: Add .cpu directive.
bfd/ChangeLog:
* cpu-arc.c (arc_get_mach): Delete.
This reverts commit 95e61695c1. People
still want to use older versions of bison, apparently.
Revert 2016-10-06 Alan Modra <amodra@gmail.com>
* config/rl78-parse.y: Do use old %name-prefix syntax.
* config/rx-parse.y: Likewise.
In 32-bit, the REX_B bit in the 3-byte VEX prefix is ignored and the
the highest bit in VEX.vvvv is either 1 or ignored. In 64-bit, we
need to check invalid mask registers.
gas/
PR binutis/20705
* testsuite/gas/i386/i386.exp: Run x86-64-opcode-bad.
* testsuite/gas/i386/x86-64-opcode-bad.d: New file.
* testsuite/gas/i386/x86-64-opcode-bad.s: Likewise.
opcodes/
PR binutis/20705
* i386-dis.c (get_valid_dis386): Ignore the REX_B bit and
the highest bit in VEX.vvvv for the 3-byte VEX prefix in
32-bit mode. Don't check vex.register_specifier in 32-bit
mode.
(OP_E_register): Check invalid mask registers.
(OP_G): Likewise.
(OP_VEX): Likewise.
The disassember was generating invXXX instructions for cases when in reality we
had llockd or scondd instrutions.
opcodes/ChangeLog:
Cupertino Miranda <cmiranda@synopsys.com>
arc-tbl.h: Removed any "inv.+" instructions from the table.
gas/ChangeLog:
Cupertino Miranda <cmiranda@synopsys.com>
testsuite/arc/dis-inv.s: Test to validate patch.
testsuite/arc/dis-inv.d: Likewise.
The ARC (short) instructions are using a special register number to
indicate is the instruction uses a long immediate (LIMM). In the case
of short instruction, this LIMM indicator depends on the ISA version
used. Thus, for ARCv1 processors, the LIMM indicator is 0x3E, the same
value used in "long" instructions. However, for the ARCv2 processors,
this LIMM indicator is 0x1E.
This patch fixes the LIMM detection for ARCv1 ISA and adds two tests.
gas/
2016-10-13 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/shortlimm_a7.d: New file.
* testsuite/gas/arc/shortlimm_a7.s: Likewise.
* testsuite/gas/arc/shortlimm_hs.d: Likewise.
* testsuite/gas/arc/shortlimm_hs.s: Likewise.
include/
2016-10-13 Claudiu Zissulescu <claziss@synopsys.com>
* opcode/arc.h (ARC_OPCODE_ARCV2): New define.
opcodes/
2016-10-13 Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (find_format_from_table): Discriminate LIMM indicator
usage on ISA basis.
The CFI* testcases fail on MIPS64 because the augmentation string does
not match the regexp. This is because MIPS64 doesn't use the default of
4 for DWARF2_FDE_RELOC_SIZE which ends up as "b" in the augmentation
string. MIPS64 uses the address size which is 8 resulting in "c".
Adding c to the regexp fixes a couple of them. Others also need
adjustments in the FDE header lines due to different
sizes/offsets.
gas/ChangeLog:
2016-10-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* testsuite/gas/cfi/cfi-common-1.d: Adjust regexps for mips64.
* testsuite/gas/cfi/cfi-common-2.d: Likewise.
* testsuite/gas/cfi/cfi-common-3.d: Likewise.
* testsuite/gas/cfi/cfi-common-4.d: Likewise.
* testsuite/gas/cfi/cfi-common-5.d: Likewise.
* testsuite/gas/cfi/cfi-common-7.d: Likewise.
* testsuite/gas/cfi/cfi-common-8.d: Likewise.
* testsuite/gas/cfi/cfi-common-9.d: Likewise.
* testsuite/gas/cfi/cfi-mips-1.d: Likewise.
I noticed a while ago that the rx-elf gas gprel test regressed for no
apparent reason. It turns out that the problem was rx-parse.y using
BFD_RELOC_RX_* values, which may change when other targets add new
relocs. If rx-parse.o doesn't depend on bfd.h, it won't be recompiled.
* Makefile.am (EXTRA_as_new_SOURCES): Add config/rl78-parse.y and
config/rx-parse.y. Move config/bfin-parse.y.
(bfin-parse.@OBJEXT@, rl78-parse.@OBJEXT@, rx-parse.@OBJEXT@): Delete.
($(srcdir)/config/rl78-defs.h): New rule.
* Makefile.in: Regenerate.
The comment logically belongs inside the preprocessor conditional,
but gcc's -Wimplicit-fallthrough loses track of it. Revert when/if
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=77817 is fixed.
* app.c (do_scrub_chars): Move fall through comment.
* expr.c (operand): Likewise.
The .cfi_sections directive can be safely used multiple times
with different sections named at any time unless the compact form
of exception handling is requested after CFI information has
been emitted. Only the compact form of CFI information changes
the way in which CFI is generated and therefore cannot be
retrospectively requested after generating CFI information.
gas/
PR gas/20648
* dw2gencfi.c (dot_cfi_sections): Refine the check for
inconsistent .cfi_sections to only consider compact vs non
compact forms.
* testsuite/gas/cfi/cfi-common-9.d: New file.
* testsuite/gas/cfi/cfi-common-9.s: New file.
* testsuite/gas/cfi/cfi.exp: Run new test.
opcode/
PR target/20553
* aarch64-tbl.h (fmla, fmls, fmul, fmulx): Fix opcode mask field.
gas/
* testsuite/gas/aarch64/advsimd-fp16.s (indexed_elem): New high index
testcases for H and S variants. New low index testcases for D variant.
* testsuite/gas/aarch64/advsimd-fp16.d: Update expected results.
This patch adds support for .cfi_val_offset GAS pseudo command which
maps to DW_CFA_val_offset and DW_CFA_val_offset_sf.
gas/ChangeLog:
2016-09-29 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* doc/as.texinfo: Add docu for .cfi_val_offset.
* dw2gencfi.c (cfi_add_CFA_val_offset): New function.
(dot_cfi): Add case for DW_CFA_val_offset.
(output_cfi_insn): Likewise.
(cfi_pseudo_table): Add entry for cfi_val_offset.
* dw2gencfi.h: Add prototype for cfi_add_CFA_val_offset.
* testsuite/gas/cfi/cfi-common-8.d: New test.
* testsuite/gas/cfi/cfi-common-8.s: New test.
* testsuite/gas/cfi/cfi.exp: Run cfi-common-8 testcase.
binutils/ChangeLog:
2016-09-29 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* dwarf.c (display_debug_frames): Adjust output line.
cmp[l][o] get an optional L field only when generating 32-bit code.
dcbf, tlbie and tlbiel keep their optional L field, ditto for R field
of tbegin. cmprb, tsr., wlcr[all] and mtsle all change to a
compulsory L field.
L field of dcbf and wclr is 2 bits.
PR 20641
include/
* opcode/ppc.h (PPC_OPERAND_OPTIONAL32): Define.
opcodes/
* ppc-opc.c (L): Make compulsory.
(LOPT): New, optional form of L.
(HTM_R): Define as LOPT.
(L0, L1): Delete.
(L32OPT): New, optional for 32-bit L.
(L2OPT): New, 2-bit L for dcbf.
(SVC_LEC): Update.
(L2): Define.
(insert_l0, extract_l0, insert_l1, extract_l2): Delete.
(powerpc_opcodes <cmpli, cmpi, cmpl, cmp>): Use L32OPT.
<dcbf>: Use L2OPT.
<tlbiel, tlbie>: Use LOPT.
<wclr, wclrall>: Use L2.
gas/
* config/tc-ppc.c (md_assemble): Handle PPC_OPERAND_OPTIONAL32.
* testsuite/gas/ppc/power8.s: Provide tbegin. operand.
* testsuite/gas/ppc/power9.d: Update cmprb disassembly.