PR9605
gdb/
* breakpoint.c (insert_bp_location): If inserting the read
watchpoint failed, fallback to an access watchpoint.
(bpstat_check_watchpoint): Stop for read watchpoint triggers even
if the value changed, if not watching the same memory for writes.
(watchpoint_locations_match): Add comment.
(update_global_location_list): Copy the location's watchpoint type.
* i386-nat.c (i386_length_and_rw_bits): It's an internal error to
handle read watchpoints here.
(i386_insert_watchpoint): Read watchpoints aren't supported.
* remote.c (remote_insert_watchpoint): Return 1 for unsupported
packets.
* target.h (target_insert_watchpoint): Update description.
2010-02-22 Pedro Alves <pedro@codesourcery.com>
PR9605
gdbserver/
* i386-low.c (i386_length_and_rw_bits): Throw a fatal error if
handing a read watchpoint.
(i386_low_insert_watchpoint): Read watchpoints aren't supported.
2010-02-22 Pedro Alves <pedro@codesourcery.com>
PR9605
gdb/testsuite/
* gdb.base/watch-read.c, gdb.base/watch-read.exp: New files.
* inferiors.c (find_inferior): Add function documentation.
(unloaded_dll): Handle the case where the unloaded dll has not
been previously registered in the dll list.
(arm_linux_thumb2_le_breakpoint): New constants.
(arm_linux_init_abi): Set thumb2_breakpoint and
thumb2_breakpoint_size.
* arm-tdep.c (thumb_insn_size, thumb_advance_itstate): New functions.
(thumb_get_next_pc): Add a comment. Rename IT to ITSTATE.
Implement support for single stepping through IT blocks if
a 32-bit Thumb breakpoint instruction is available.
(arm_breakpoint_from_pc): If a 32-bit Thumb breakpoint instruction
is available, use it when needed.
(arm_remote_breakpoint_from_pc): New function.
(arm_gdbarch_init): Register arm_remote_breakpoint_from_pc.
* arm-tdep.h (struct gdbarch_tdep): Correct thumb_breakpoint
comment. Add thumb2_breakpoint and thumb2_breakpoint_size.
gdbserver/
* linux-arm-low.c (thumb_breakpoint_len): Delete.
(thumb2_breakpoint): New.
(arm_breakpoint_at): Check for Thumb-2 breakpoints.
testsuite/
* gdb.arch/thumb2-it.S, gdb.arch/thumb2-it.exp: New files.
match a breakpoint.
(handle_inferior_event): Move the check for unusual breakpoint
signals earlier.
gdbserver/
* linux-low.c (get_stop_pc): Check for SIGTRAP.
(linux_wait_for_event_1): Handle SIGILL and SIGSEGV as possible
breakpoints.
parameter. Don't release/detach from thread_db here.
(linux_kill): Release/detach from thread_db here, ...
(linux_detach): ... and here, before actually detaching.
(linux_wait_1): ... and here, when a process exits.
* thread-db.c (any_thread_of): New.
(thread_db_free): Switch the current inferior to a thread of the
passed in process.
* linux-nat.c (kill_lwp): Minor cleanup, move definition of
tkill_failed into ifdef HAVE_TKILL_SYSCALL. Move setting of errno
there too. Delete unnecessary resetting of errno after syscall.
Minor comment changes to match gdbserver/linux-low.c:kill_lwp.
gdbserver/
* linux-low.c (kill_lwp): Use __NR_tkill instead of SYS_tkill.
Move definition of tkill_failed to ifdef __NR_tkill to avoid gcc
warning ifndef __NR_tkill. Move setting of errno there too.
Delete unnecessary resetting of errno after syscall.
Minor comment changes to match gdb/linux-nat.c:kill_lwp.
* gdb_proc_service.h (psaddr_t): Fix type.
* linux-thread-db.c (thread_db_info.td_thr_tls_get_addr_p): Fix
signature to match glibc.
(thread_db_get_thread_local_address): Use psaddr_t for type of
address to match parameter of td_thr_tls_get_addr_p.
Cast through psaddr_t instead of (void*) to match parameter of
td_thr_tls_get_addr_p.
gdbserver/
* gdb_proc_service.h (psaddr_t): Fix type.
* thread-db.c (thread_db_info.td_thr_tls_get_addr_p): Fix
signature to match glibc.
(OUTMSG): Output to stderr.
(OUTMSG2): Conditionalize on `debug_threads' variable, instead of
on compile time LOG macro.
(win32_wait): Fix debug output.
2009-11-17 Vladimir Prus <vladimir@codesourcery.com>
* Makefile.in (reg-cf.o, reg-cf.c): New targets.
* configure.ac: Check for __mcoldfire__ and set
gdb_cv_m68k_is_coldfire.
* configure.srv: Use gdb_cv_m68k_is_coldfire to select between
reg-cf.o and reg-m68k.o.
* configure: Regenerated.
2009-11-17 Nathan Sidwell <nathan@codesourcery.com>
* regformats/reg-cf.dat: New file.
Pass it to thread_db_free.
(linux_kill, linux_detach, linux_wait_1): Adjust to pass the
proper `detaching' argument to linux_remove_process.
* linux-low.h (thread_db_free): Add `detaching' parameter.
* thread-db.c (thread_db_init): Pass false as `detaching' argument
to thread_db_free.
(thread_db_free): Add `detaching' parameter. Only
call td_ta_clear_event if detaching from process.
PR gdb/10757
* thread-db.c (attach_thread): New function.
(maybe_attach_thread): Return success/failure.
(find_new_threads_callback): Adjust.
(thread_db_find_new_threads): Loop until no new threads.
* linux-nat.c: Include <sys/vfs.h>.
(SPUFS_MAGIC): Define.
(spu_enumerate_spu_ids): New function.
(linux_proc_xfer_spu): New function.
(linux_xfer_partial): Handle TARGET_OBJECT_SPU.
(iterate_over_spus): New function.
(struct linux_spu_corefile_data): New data type.
(linux_spu_corefile_callback): New function.
(linux_spu_make_corefile_notes): New function.
(linux_nat_make_corefile_notes): Call it.
* corelow.c (struct spuid_list): New data type.
(add_to_spuid_list): New function.
(core_xfer_partial): Handle TARGET_OBJECT_SPU.
gdbserver/ChangeLog:
* linux-low.c: Include <sys/stat.h> and <sys/vfs.h>.
(SPUFS_MAGIC): Define.
(spu_enumerate_spu_ids): New function.
(linux_qxfer_spu): New function.
(linux_target_ops): Install linux_qxfer_spu.
* configure: Regenerated.
* configure.ac: Add case for srv_qnx and set LIBS accordingly.
* configure.srv (i[34567]86-*-nto*): New target.
* nto-low.c, nto-low.h, nto-x86-low.c: New files.
* remote-utils.c [__QNX__]: Include sys/iomgr.h
(nto_comctrl) [__QNX__]: New function.
(enable_async_io, disable_async_io) [__QNX__]: Call nto_comctrl.
Pedro Alves <pedro@codesourcery.com>
* target.h (struct target_ops) <supports_multi_process>: New
callback.
(target_supports_multi_process): New.
* server.c (handle_query): Even if GDB reports support, only
enable multi-process if the target also supports it. Report
multi-process support only if the target backend supports it.
* linux-low.c (linux_supports_multi_process): New function.
(linux_target_ops): Install it as target_supports_multi_process
callback.
Global renaming of find_thread_pid to find_thread_ptid.
* gdbthread.h (find_thread_ptid): Renamed from find_thread_pid.
* thread.c (find_thread_ptid): Renamed from find_thread_pid.
All callers updated.
gdbserver:
Global renaming of find_thread_pid to find_thread_ptid.
* server.h (find_thread_ptid): Renamed from find_thread_pid.
* inferiors.c (find_thread_ptid): Renamed from find_thread_pid.
All callers updated.
* linux-low.c (must_set_ptrace_flags): Delete.
(linux_create_inferior): Set `lwp->must_set_ptrace_flags' instead
of the global.
(linux_attach_lwp_1): Don't set PTRACE_SETOPTIONS here. Set
`lwp->must_set_ptrace_flags' instead.
(linux_wait_for_event_1): If ptrace options here.
(linux_wait_1): ... not here.
(attached_inferior_callback): New function.
(have_started_inferiors_p, have_attached_inferiors_p): New functions.
* server.c (print_started_pid, print_attached_pid): New functions.
(detach_or_kill_for_exit): New function.
(main): Call it instead of for_each_inferior (kill_inferior_callback).
* server.h (have_started_inferiors_p): Declare.
(have_attached_inferiors_p): Declare.
* server.h (get_thread_process): Add prototype.
* thread-db.c (find_one_thread): Use get_thread_process
instead of current_process.
(thread_db_get_tls_address): Do not crash if called when
thread layer is not yet initialized.
Implement the multiprocess extensions, and add linux multiprocess
support.
* server.h (ULONGEST): Declare.
(struct ptid, ptid_t): New.
(minus_one_ptid, null_ptid): Declare.
(ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp)
(ptid_get_tid, ptid_equal, ptid_is_pid): Declare.
(struct inferior_list_entry): Change `id' type from unsigned from
to ptid_t.
(struct sym_cache, struct breakpoint, struct
process_info_private): Forward declare.
(struct process_info): Declare.
(current_process): Declare.
(all_processes): Declare.
(initialize_inferiors): Declare.
(add_thread): Adjust to use ptid_t.
(thread_id_to_gdb_id, thread_to_gdb_id, gdb_id_to_thread_id): Ditto.
(add_process, remove_process, find_thread_pid): Declare.
(find_inferior_id): Adjust to use ptid_t.
(cont_thread, general_thread, step_thread): Change type to ptid_t.
(multi_process): Declare.
(push_event): Adjust to use ptid_t.
(read_ptid, write_ptid): Declare.
(prepare_resume_reply): Adjust to use ptid_t.
(clear_symbol_cache): Declare.
* inferiors.c (all_processes): New.
(null_ptid, minus_one_ptid): New.
(ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp)
(ptid_get_tid, ptid_equal, ptid_is_pid): New.
(add_thread): Change unsigned long to ptid. Remove gdb_id
parameter. Adjust.
(thread_id_to_gdb_id, thread_to_gdb_id): Change unsigned long to ptid.
(gdb_id_to_thread): Rename to ...
(find_thread_pid): ... this. Change unsigned long to ptid.
(gdb_id_to_thread_id, find_inferior_id): Change unsigned long to ptid.
(loaded_dll, pull_pid_from_list): Adjust.
(add_process, remove_process, find_process_pid)
(get_thread_process, current_process, initialize_inferiors): New.
* target.h (struct thread_resume) <thread>: Change type to ptid_t.
(struct target_waitstatus) <related_pid>: Ditto.
(struct target_ops) <kill, detach>: Add `pid' argument. Change
return type to int.
(struct target_ops) <join>: Add `pid' argument.
(struct target_ops) <thread_alive>: Change pid's type to ptid_t.
(struct target_ops) <wait>: Add `ptid' field. Change return type
to ptid.
(kill_inferior, detach_inferior, join_inferior): Add `pid' argument.
(mywait): Add `ptid' argument. Change return type to ptid_t.
(target_pid_to_str): Declare.
* target.c (set_desired_inferior): Adjust to use ptids.
(mywait): Add new `ptid' argument. Adjust.
(target_pid_to_str): New.
* mem-break.h (free_all_breakpoints): Declare.
* mem-break.c (breakpoints): Delelete.
(set_breakpoint_at, delete_breakpoint, find_breakpoint_at)
(check_mem_read, check_mem_write, delete_all_breakpoints): Adjust
to use per-process breakpoint list.
(free_all_breakpoints): New.
* remote-utils.c (struct sym_cache) <name>: Drop `const'.
(symbol_cache, all_symbols_looked_up): Delete.
(hexchars): New.
(ishex, unpack_varlen_hex, write_ptid, hex_or_minus_one,
read_ptid): New.
(prepare_resume_reply): Change ptid argument's type from unsigned
long to ptid_t. Adjust. Implement W;process and X;process.
(free_sym_cache, clear_symbol_cache): New.
(look_up_one_symbol): Adjust to per-process symbol cache. *
* server.c (cont_thread, general_thread, step_thread): Change type
to ptid_t.
(attached): Delete.
(multi_process): New.
(last_ptid): Change type to ptid_t.
(struct vstop_notif) <ptid>: Change type to ptid_t.
(queue_stop_reply, push_event): Change `ptid' argument's type to
ptid_t.
(discard_queued_stop_replies): Add `pid' argument.
(start_inferior): Adjust to use ptids. Adjust to mywait interface
changes. Don't reference the `attached' global.
(attach_inferior): Adjust to mywait interface changes.
(handle_query): Adjust to use ptids. Parse GDB's qSupported
features. Handle and report "multiprocess+". Handle
"qAttached:PID".
(handle_v_cont): Adjust to use ptids. Adjust to mywait interface
changes.
(handle_v_kill): New.
(handle_v_stopped): Adjust to use target_pid_to_str.
(handle_v_requests): Allow multiple attaches and runs when
multiprocess extensions are in effect. Handle "vKill".
(myresume): Adjust to use ptids.
(queue_stop_reply_callback): Add `arg' parameter. Handle it.
(handle_status): Adjust to discard_queued_stop_replies interface
change.
(first_thread_of, kill_inferior_callback)
(detach_or_kill_inferior_callback, join_inferiors_callback): New.
(main): Call initialize_inferiors. Adjust to use ptids, killing
and detaching from all inferiors. Handle multiprocess packet
variants.
* linux-low.h: Include gdb_proc_service.h.
(struct process_info_private): New.
(struct linux_target_ops) <pid_of>: Use ptid_get_pid.
<lwpid_of>: Use ptid_get_lwp.
(get_lwp_thread): Adjust.
(struct lwp_info): Add `dead' member.
(find_lwp_pid): Declare.
* linux-low.c (thread_db_active): Delete.
(new_inferior): Adjust comment.
(inferior_pid): Delete.
(linux_add_process): New.
(handle_extended_wait): Adjust.
(add_lwp): Change unsigned long to ptid.
(linux_create_inferior): Add process to processes table. Adjust
to use ptids. Don't set new_inferior here.
(linux_attach_lwp): Rename to ...
(linux_attach_lwp_1): ... this. Add `initial' argument. Handle
it. Adjust to use ptids.
(linux_attach_lwp): New.
(linux_attach): Add process to processes table. Don't set
new_inferior here.
(struct counter): New.
(second_thread_of_pid_p, last_thread_of_process_p): New.
(linux_kill_one_lwp): Add `args' parameter. Handle it. Adjust to
multiple processes.
(linux_kill): Add `pid' argument. Handle it. Adjust to multiple
processes. Remove process from process table.
(linux_detach_one_lwp): Add `args' parameter. Handle it. Adjust
to multiple processes.
(any_thread_of): New.
(linux_detach): Add `pid' argument, and handle it. Remove process
from processes table.
(linux_join): Add `pid' argument. Handle it.
(linux_thread_alive): Change unsighed long argument to ptid_t.
Consider dead lwps as not being alive.
(status_pending_p): Rename `dummy' argument to `arg'. Filter out
threads we're not interested in.
(same_lwp, find_lwp_pid): New.
(linux_wait_for_lwp): Change `pid' argument's type from int to
ptid_t. Adjust.
(linux_wait_for_event): Rename to ...
(linux_wait_for_event_1): ... this. Change `pid' argument's type
from int to ptid_t. Adjust.
(linux_wait_for_event): New.
(linux_wait_1): Add `ptid' argument. Change return type to
ptid_t. Adjust. Use last_thread_of_process_p. Remove processes
that exit from the process table.
(linux_wait): Add `ptid' argument. Change return type to ptid_t.
Adjust.
(mark_lwp_dead): New.
(wait_for_sigstop): Adjust to use ptids. If a process exits while
stopping all threads, mark its main lwp as dead.
(linux_set_resume_request, linux_resume_one_thread): Adjust to use
ptids.
(fetch_register, usr_store_inferior_registers)
(regsets_fetch_inferior_registers)
(regsets_store_inferior_registers, linux_read_memory)
(linux_write_memory): Inline `inferior_pid'.
(linux_look_up_symbols): Adjust to use per-process
`thread_db_active'.
(linux_request_interrupt): Adjust to use ptids.
(linux_read_auxv): Inline `inferior_pid'.
(initialize_low): Don't reference thread_db_active.
* gdb_proc_service.h (struct ps_prochandle) <pid>: Remove.
* proc-service.c (ps_lgetregs): Use find_lwp_pid.
(ps_getpid): Return the pid of the current inferior.
* thread-db.c (proc_handle, thread_agent): Delete.
(thread_db_create_event, thread_db_enable_reporting): Adjust to
per-process data.
(find_one_thread): Change argument type to ptid_t. Adjust to
per-process data.
(maybe_attach_thread): Adjust to per-process data and ptids.
(thread_db_find_new_threads): Ditto.
(thread_db_init): Ditto.
* spu-low.c (spu_create_inferior, spu_attach): Add process to
processes table. Adjust to use ptids.
(spu_kill, spu_detach): Adjust interface. Remove process from
processes table.
(spu_join, spu_thread_alive): Adjust interface.
(spu_wait): Adjust interface. Remove process from processes
table. Adjust to use ptids.
* win32-low.c (current_inferior_tid): Delete.
(current_inferior_ptid): New.
(debug_event_ptid): New.
(thread_rec): Take a ptid. Adjust.
(child_add_thread): Add `pid' argument. Adjust to use ptids.
(child_delete_thread): Ditto.
(do_initial_child_stuff): Add `attached' argument. Add process to
processes table.
(child_fetch_inferior_registers, child_store_inferior_registers):
Adjust.
(win32_create_inferior): Pass 0 to do_initial_child_stuff.
(win32_attach): Pass 1 to do_initial_child_stuff.
(win32_kill): Adjust interface. Remove process from processes
table.
(win32_detach): Ditto.
(win32_join): Adjust interface.
(win32_thread_alive): Take a ptid.
(win32_resume): Adjust to use ptids.
(get_child_debug_event): Ditto.
(win32_wait): Adjust interface. Remove exiting process from
processes table.
* server.h (non_stop): Declare.
(gdb_client_data, handler_func): Declare.
(delete_file_handler, add_file_handler, start_event_loop):
Declare.
(handle_serial_event, handle_target_event, push_event)
(putpkt_notif): Declare.
* target.h (enum resume_kind): New.
(struct thread_resume): Replace `step' field by `kind' field.
(TARGET_WNOHANG): Define.
(struct target_ops) <wait>: Add `options' argument.
<supports_non_stop, async, start_non_stop>: New fields.
(target_supports_non_stop, target_async): New.
(start_non_stop): Declare.
(mywait): Add `options' argument.
* target.c (mywait): Add `options' argument. Print child exit
notifications here.
(start_non_stop): New.
* server.c (non_stop, own_buf, mem_buf): New globals.
(struct vstop_notif): New.
(notif_queue): New global.
(queue_stop_reply, push_event, discard_queued_stop_replies)
(send_next_stop_reply): New.
(start_inferior): Adjust to use resume_kind. Adjust to mywait
interface changes.
(attach_inferior): In non-stop mode, don't wait for the target
here.
(handle_general_set): Handle QNonStop.
(handle_query): When handling qC, return the current general
thread, instead of the first thread of the list.
(handle_query): If the backend supports non-stop mode, include
QNonStop+ in the qSupported query response.
(handle_v_cont): Adjust to use resume_kind. Handle resume_stop
and non-stop mode.
(handle_v_attach, handle_v_run): Handle non-stop mode.
(handle_v_stopped): New.
(handle_v_requests): Report support for vCont;t. Handle vStopped.
(myresume): Adjust to use resume_kind. Handle non-stop.
(queue_stop_reply_callback): New.
(handle_status): Handle non-stop mode.
(main): Clear non_stop flag on reconnection. Use the event-loop.
Refactor serial protocol handling from here ...
(process_serial_event): ... to this new function. When GDB
selects any thread, select one here. In non-stop mode, wait until
GDB acks all pending events before exiting.
(handle_serial_event, handle_target_event): New.
* remote-utils.c (remote_open): Install remote_desc in the event
loop.
(remote_close): Remove remote_desc from the event loop.
(putpkt_binary): Rename to...
(putpkt_binary_1): ... this. Add `is_notic' argument. Handle it.
(putpkt_binary): New as wrapper around putpkt_binary_1.
(putpkt_notif): New.
(prepare_resume_reply): In non-stop mode, don't change the
general_thread.
* event-loop.c: New.
* Makefile.in (OBJ): Add event-loop.o.
(event-loop.o): New rule.
* linux-low.h (pid_of): Moved here.
(lwpid_of): New.
(get_lwp_thread): Use lwpid_of.
(struct lwp_info): Delete `lwpid' field. Add `suspended' field.
* linux-low.c (pid_of): Delete.
(inferior_pid): Use lwpid_of.
(linux_event_pipe): New.
(target_is_async_p): New.
(delete_lwp): New.
(handle_extended_wait): Use lwpid_of.
(add_lwp): Don't set lwpid field.
(linux_attach_lwp): Adjust debug output. Use lwpid_of.
(linux_kill_one_lwp): If killing a running lwp, stop it first.
Use lwpid_of. Adjust to linux_wait_for_event interface changes.
(linux_detach_one_lwp): If detaching from a running lwp, stop it
first. Adjust to linux_wait_for_event interface changes. Use
lwpid_of.
(linux_detach): Don't delete the main lwp here.
(linux_join): Use my_waitpid. Avoid signal_pid. Use lwpid_of.
(status_pending_p): Don't consider explicitly suspended lwps.
(linux_wait_for_lwp): Take an integer pid instead of a lwp_info
pointer. Add OPTIONS argument. Change return type to int. Use
my_waitpid instead of sleeping. Handle WNOHANG. Use lwpid_of.
(linux_wait_for_event): Take an integer pid instead of a lwp_info
pointer. Add status pointer argument. Return a pid instead of a
status. Use lwpid_of. Adjust to linux_wait_for_lwp interface
changes. In non-stop mode, don't switch to a random thread.
(linux_wait): Rename to...
(linux_wait_1): ... this. Add target_options argument, and handle
it. Adjust to use resume_kind. Use lwpid_of. In non-stop mode,
don't handle the continue thread. Handle TARGET_WNOHANG. Merge
clean exit and signal exit code. Don't stop all threads in
non-stop mode. In all-stop mode, only stop all threads when
reporting a stop to GDB. Handle explicit thread stop requests.
(async_file_flush, async_file_mark): New.
(linux_wait): New.
(send_sigstop): Use lwpid_of.
(wait_for_sigstop): Use lwpid_of. Adjust to linux_wait_for_event
interface changes. In non-stop mode, don't switch to a random
thread.
(linux_resume_one_lwp): Use lwpid_of.
(linux_continue_one_thread, linux_queue_one_thread): Merge into ...
(linux_resume_one_thread): ... this. Handle resume_stop. In
non-stop mode, don't look for pending flag in all threads.
(resume_status_pending_p): Don't consider explicitly suspended
threads.
(my_waitpid): Reimplement. Emulate __WALL.
(linux_request_interrupt, linux_read_offsets, linux_xfer_siginfo):
Use lwpid_of.
(sigchld_handler, linux_supports_non_stop, linux_async)
(linux_start_non_stop): New.
(linux_target_ops): Register linux_supports_non_stop, linux_async
and linux_start_non_stop.
(initialize_low): Install SIGCHLD handler.
* thread-db.c (thread_db_create_event, find_one_thread)
(thread_db_get_tls_address): Use lwpid_of.
* win32-low.c (win32_detach): Adjust to use resume_kind.
(win32_wait): Add `options' argument.
* spu-low.c (spu_resume): Adjust to use resume_kind.
(spu_wait): Add `options' argument.
* target.h (enum target_waitkind): New.
(struct target_waitstatus): New.
(struct target_ops) <wait>: Return an unsigned long. Take a
target_waitstatus pointer instead of a char pointer.
(mywait): Likewise.
* target.c (mywait): Change prototype to return an unsigned long.
Take a target_waitstatus pointer instead of a char pointer. Adjust.
* server.h (thread_from_wait, old_thread_from_wait): Delete
declarations.
(prepare_resume_reply): Change prototype to take a
target_waitstatus.
* server.c (thread_from_wait, old_thread_from_wait): Delete.
(last_status, last_ptid): New.
(start_inferior): Remove "statusptr" argument. Adjust. Return a
pid instead of a signal.
(attach_inferior): Remove "status" and "signal" parameters.
Adjust.
(handle_query): For qGetTLSAddr, parse the thread id with strtol,
not as an address.
(handle_v_cont, handle_v_attach, handle_v_run, handle_v_kill)
(handle_v_requests, myresume): Remove "status" and "signal"
parameters. Adjust.
(handle_status): New.
(main): Delete local `status'. Adjust.
* remote-utils.c: Include target.h.
(prepare_resume_reply): Change prototype to take a
target_waitstatus. Adjust.
* linux-low.c (linux_wait): Adjust to new target_ops->wait
interface.
* spu-low.c (spu_wait): Adjust.
* win32-low.c (enum target_waitkind, struct target_waitstatus):
Delete.
(win32_wait): Adjust.
(struct target_ops): Add a `n' argument to the `resume' callback.
* server.c (start_inferior): Adjust.
(handle_v_cont, myresume): Adjust.
* linux-low.c (check_removed_breakpoint): Adjust to resume
interface change, and to removed leave_stopped field.
(resume_ptr): Delete.
(struct thread_resume_array): New.
(linux_set_resume_request): Add new `arg' parameter. Adjust to
resume interface change.
(linux_continue_one_thread, linux_queue_one_thread)
(resume_status_pending_p): Check if the resume field is NULL
instead of checking the leave_stopped member.
(linux_resume): Adjust to the target resume interface change.
* spu-low.c (spu_resume): Adjust to the target resume interface
change.
* win32-low.c (win32_detach, win32_resume): Ditto.
* linux-low.c (linux_wait_for_event): Don't clear the `stepping'
flag.
(wait_for_sigstop): Don't leave a finished single-step SIGTRAP
pending.
(linux_continue_one_thread): Only preserve the stepping flag if
there's a pending breakpoint.
gdb/testsuite/
* gdb.threads/pending-step.c, gdb.threads/pending-step.exp: New.
Fix size of FPSCR in Power 7 processors.
* ppc-linux-nat.c (PPC_FEATURE_ARCH_2_05): Remove #define.
(PPC_FEATURE_HAS_DFP): New #define.
(ppc_linux_read_description): Check for DFP feature instead of
ISA 2.05 to decide on size of the FPSCR.
gdbserver/
Fix size of FPSCR in Power 7 processors.
* linux-ppc-low.c (PPC_FEATURE_ARCH_2_05): Remove #define.
(PPC_FEATURE_HAS_DFP): New #define.
(ppc_arch_setup): Check for DFP feature instead of ISA 2.05 to decide on
size of the FPSCR.
gdb/
* remote.c (PACKET_qAttached): New.
(remote_query_attached): New.
(remote_add_inferior): Add new `attached' argument. Handle it.
(remote_notice_new_inferior, remote_start_remote): Adjust to pass
-1 to remote_add_inferior in new parameter.
(extended_remote_attach_1): Adjust to pass 1 to
remote_add_inferior in the new parameter.
(extended_remote_create_inferior_1): Adjust to pass 0 to
remote_add_inferior in the new parameter.
(_initialize_remote): Add "set/show remote query-attached-packet"
commands.
2009-03-14 Pedro Alves <pedro@codesourcery.com>
gdb/gdbserver/
* server.c (handle_query): Handle "qAttached".
2009-03-14 Pedro Alves <pedro@codesourcery.com>
gdb/doc/
* gdb.texinfo (Remote Configuration): Document query-attached.
(General Query Packets): Document qAttached.
* server.c (handle_search_memory): Back out calls to xmalloc,
result is checked and error is returned to user upon failure.
(handle_query): Ditto. Add more checks for result of malloc.
(handle_v_cont): Check result of malloc, report error back to
user upon failure.
(handle_v_run): Ditto. Call freeargv.
* server.h (freeargv): Declare.
* utils.c (freeargv): New fn.
Pedro Alves
Doug Evans
H.J. Lu
Joel Brobecker
Jan Kratochvil
Daniel Jacobowitz
Vladimir Prus
Ulrich Weigand
Maxim Kuvyrkov
Paul Pluzhnikov
Nathan Sidwell
Sandra Loosemore
Ralf Wildenhues
Aleksandar Ristovski
Pierre Muller
Thiago Jung Bauermann