Various warnings are emitted during startup and option-parsing using
fprintf_unfiltered. One warning is prefixed with the command name,
the others are not. This commit replaces these hardwired warnings
with calls to warning. It also sets warning_pre_print to prefix all
warnings with the command name until option parsing is complete.
gdb/ChangeLog:
* main.c (captured_main): Use warning during startup.
Prefix startup warning messages with command name.
This commit replaces the hardwired fprintf/exit error handlers
for usage errors with calls to error.
gdb/ChangeLog:
* main.c (captured_main): Handle usage errors with error.
go32_create_inferior invokes a hardwired fprintf/exit error handler
if v2loadimage fails. I could find no reason for this other than that
the block seems to have been copy-and-pasted from v2loadimage's
manpage. This commit replaces the hardwired handler with a call to
error.
gdb/ChangeLog:
* go32-nat.c (go32_create_inferior): Replace a fprintf/
exit pair with a call to error. Wrap the message with _().
If the requested interpreter cannot be set captured_main reports the
error with a hardwired fprintf/exit pair. A fprintf/exit pair on the
previous line was replaced with a call to error in March 2003
(https://sourceware.org/ml/gdb-patches/2003-03/msg00444.html) but I
found no documentation as to why this particular hardwired handler
was left untouched. I was also unable to come up with a situation
where error would not be suitable, so I have replaced it with a call
to error.
gdb/ChangeLog:
* main.c (captured_main): Replace a fprintf/exit
pair with a call to error. Wrap the message with _().
tui_initialize_io contains a pair of hardwired fprintf/exit error
handlers. I was unable to find any documentation as to why they're
hardwired (the code appeared in a monolithic block back in 2001:
https://sourceware.org/ml/gdb-patches/2001-07/msg00490.html) and I
was also unable to come up with a situation where error would not
be suitable, so I have replaced both handlers with calls to error.
gdb/ChangeLog:
* tui/tui-io.c (tui_initialize_io): Replace two fprintf/exit
pairs with calls to error. Wrap the message with _().
warning will crash if called before the first call to set_width. This
commit makes the warning usable from the moment gdb_stderr is set up.
gdb/ChangeLog:
* utils.c (vwarning): Protect calls to target_terminal_ours
and wrap_here.
error (and other exception-throwing functions) are callable from the
first line of captured_main, but the exception printing code will
crash if called before the first call to set_width. This commit makes
the exception printing code usable from the moment gdb_stderr is set
up.
gdb/ChangeLog:
* exceptions.c (print_flush): Protect calls to
target_terminal_ours and wrap_here.
internal_vproblem can be called (via malloc_failure) from almost the
first line of captured_main, but it will crash if called before the
first call to set_width. This commit makes internal_vproblem work
at any time.
There are two parts to this. If called before gdb_stderr is set up,
internal_vproblem will fall back to printing the message on regular
stderr and aborting. If called after gdb_stderr is set up but before
filtered printing is set up, internal_vproblem will operate as usual
except that it can not query whether to quit and/or dump core so it
defaults to doing both.
gdb/ChangeLog:
* utils.h (filtered_printing_initialized): New declaration.
* utils.c (abort_with_message): New function.
(internal_vproblem): Use abort_with_message for first level
recursive internal problems, and if gdb_stderr is not set up.
Protect calls to target_terminal_ours, begin_line and query.
clang was using eax to construct %0 here:
asm ("mov %%eax, 0(%0)\n\t"
"mov %%ebx, 4(%0)\n\t"
"mov %%ecx, 8(%0)\n\t"
"mov %%edx, 12(%0)\n\t"
"mov %%esi, 16(%0)\n\t"
"mov %%edi, 20(%0)\n\t"
: /* no output operands */
: "r" (data)
: "eax", "ebx", "ecx", "edx", "esi", "edi");
which caused amd64-word.exp (and others similarly) to fail.
It's a perfectly legit thing for clang to do given the available data.
The patch fixes this by marking the registers as live from the
time of the preceding breakpoint.
gdb/testsuite/ChangeLog:
* gdb.arch/amd64-pseudo.c (main): Rewrite to better specify when
eax,etc. are live with values set by gdb and thus the compiler can't
use them.
* gdb.arch/i386-pseudo.c (main): Ditto.
This commit removes the now-unused fatal function and prototype.
gdb/gdbserver/ChangeLog:
* utils.h (fatal): Remove declaration.
* utils.c (fatal): Remove function.
This commit converts four calls to fatal into calls to
perror_with_name. perror_with_name calls error, which
in IPA terminates with exit (1) rather than longjmp, so
there is no functional change here.
gdb/gdbserver/ChangeLog:
* tracepoint.c (gdb_agent_init): Replace fatal with
perror_with_name.
(initialize_tracepoint): Likewise.
This commit converts a call to fatal in remote_prepare with a call to
error. remote_prepare is called precisely once, from main, at a point
where jumping to toplevel will call exit (1), so error and fatal are
functionally equivalent at this point. Note that remote_prepare calls
perror_with_name (which calls error) so callers of remote_prepare must
already handle the fact that it may exit via longjmp.
gdb/gdbserver/ChangeLog:
* remote-utils.c (remote_prepare): Replace fatal with error.
This commit downgrades a fatal error to a warning in linux_async.
linux_async is called from two different places in gdbserver:
Via target_async from handle_accept_event. The argument
is always zero, so the warning will never be printed here.
Via start_non_stop from handle_general_set. This prints
its own error message to stderr on failure, which will
be preceded by the warning if it is emitted.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_async): Replace fatal with warning.
Tidy up and return.
(linux_start_non_stop): Return -1 if linux_async failed.
This commit converts if..fatal checks in both i386_dr_low_set_addr
implementations to gdb_asserts. It's not obvious from the context,
but the conditional in both cases is changed to match the equivalent
conditional in the i386_dr_low_get_addr implementations. Nothing
fundamental has changed because DR_FIRSTADDR is zero. This commit
also removes a vague comment in Linux i386_dr_low_get_addr. I could
have reworded the comment (and replicated it three times for the other
identical assertions) but I think the existence of specific functions
for the status and control registers makes it fairly obvious what is
going on.
gdb/gdbserver/ChangeLog:
* linux-x86-low.c (i386_dr_low_set_addr): Replace check with
gdb_assert.
(i386_dr_low_get_addr): Remove vague comment.
* win32-i386-low.c (i386_dr_low_set_addr): Replace check with
gdb_assert.
Hi,
This patch is to handle a software watchpoint case that program returns
to caller's epilogue, and it causes the fail in thumb mode,
finish^M
Run till exit from #0 func () at gdb/testsuite/gdb.base/watchpoint-cond-gone.c:26^M
0x000001f6 in jumper ()^M
(gdb) FAIL: gdb.base/watchpoint-cond-gone.exp: Catch the no longer valid watchpoint
In the test, jumper calls func, and programs returns from func to
jumper's epilogue, IOW, the branch instruction is the last instruction
of jumper's function body.
jumper:
.....
0x000001f2 <+10>: bl 0x200 [1] <---- indirect call to func
0x000001f6 <+14>: mov sp, r7 [2] <---- start of the epilogue
0x000001f8 <+16>: add sp, #8
0x000001fa <+18>: pop {r7}
0x000001fc <+20>: pop {r0}
0x000001fe <+22>: bx r0
When the inferior returns from func back to jumper, it is expected
that an expression of a software watchpoint becomes out-of-scope.
GDB validates the expression by checking the corresponding frame,
but this check is guarded by gdbarch_in_function_epilogue_p. See
breakpoint.c:watchpoint_check.
It doesn't work in this case, because program returns from func's
epilogue back to jumper's epilogue [2], GDB thinks the program is
still within the epilogue, but in fact it goes to a different one.
When PC points at [2], the sp-restore instruction is to be
executed, so the stack frame isn't destroyed yet and we can still
use the frame mechanism reliably.
Note that when PC points to the first instruction of restoring SP,
it is part of epilogue, but we still return zero. When goes to
the next instruction, the backward scan will still match the
epilogue sequence correctly. The reason for doing this is to
handle the "return-to-epilogue" case.
What this patch does is to restrict the epilogue matching that let
GDB think the first SP restore instruction isn't part of the epilogue,
and fall back to use frame mechanism. We set 'found_stack_adjust'
zero before backward scan, and we've done this for arm mode
counterpart (arm_in_function_epilogue_p) too.
The patch is tested in arm-none-eabi and arm-none-linux-gnueabi with
various multilibs. OK to apply?
gdb:
2014-08-28 Yao Qi <yao@codesourcery.com>
* arm-tdep.c (thumb_in_function_epilogue_p): Don't set
found_stack_adjust in forward scan. Remove condition check
on found_stack_adjust which is always true. Indent the code.
Hi,
dwarf_decode_lines is called in two functions,
dwarf2_build_include_psymtabs and handle_DW_AT_stmt_list, in which, 1
is passed to argument 'want_line_info' and 'want_line_info' is a
conditional variable in dwarf_decode_lines. We can simplify it by
removing 'want_line_info' and propagating the constant 1 into
dwarf_decode_lines. This is what this patch does. This patch also
remove one line comment about WANT_LINE_INFO in
handle_DW_AT_stmt_list, as handle_DW_AT_stmt_list doesn't have such
argument.
gdb:
2014-08-28 Yao Qi <yao@codesourcery.com>
* dwarf2read.c (dwarf_decode_lines): Update declaration.
(handle_DW_AT_stmt_list): Remove comment about WANT_LINE_INFO.
(dwarf_decode_lines): Remove argument
want_line_info. Remove condition check on want_line_info.
Callers update.
The TUI terminal state becomes corrupted (e.g. key sequences such as
Alt_F and Alt_B no longer work) when one attaches to an inferior process
(via "run" or "attach") from within TUI. This terminal corruption
remains until you switch out of TUI mode.
This happens because the terminal state is not properly saved when
switching to and out from TUI mode. Although the functions tui_enable()
and tui_disable() both call the function target_terminal_save_ours() to
save the terminal state, this function is a no-op unless GDB has already
attached to an inferior process. This is because only the "native"
target has a useful implementation of target_terminal_save_ours()
(namely child_terminal_save_ours()) and we only have the "native" target
in our target vector if GDB has already attached to an inferior process.
So without an inferior process, switching to and from TUI mode does not
actually save the terminal state. Therefore when you attach to an
inferior process from within TUI mode, the proper terminal state is not
restored (after swapping from the inferior's terminal back to the GDB
terminal).
To fix this we just have to ensure that the terminal state is always
being properly saved when switching from and to TUI mode. To achieve
this, this patch removes the polymorphic function
target_terminal_save_ours() and replaces it with a regular function
gdb_save_tty_state() that always saves the terminal state.
Tested on x86_64-unknown-linux-gnu by running "make check", no new
regressions.
gdb/ChangeLog:
* target.h (struct target_ops::to_terminal_save_ours): Remove
declaration.
(target_terminal_save_ours): Remove macro.
* target-delegates.c: Regenerate.
* inf-child.c (inf_child_target): Don't set the nonexistent
field to_terminal_save_ours.
* inferior.h (child_terminal_save_ours): Remove declaration.
* terminal.h (gdb_save_tty_state): New declaration.
* inflow.c (child_terminal_save_ours): Rename to ...
(gdb_save_tty_state): ... this.
* tui/tui.c: Include terminal.h.
(tui_enable): Use gdb_save_tty_state instead of
target_terminal_save_ours.
(tui_disable): Likewise.
I read comment of scan_partial_symbols about NEED_PC and how *LOWPC
and *HIGHPC are updated:
DW_AT_ranges). If NEED_PC is set, then this function will set
*LOWPC and *HIGHPC to the lowest and highest PC values found in CU
and record the covered ranges in the addrmap.
NEED_PC is only used in the callee of scan_partial_symbols,
add_partial_subprogram,
if (pdi->tag == DW_TAG_subprogram)
{
if (pdi->has_pc_info)
{
if (pdi->lowpc < *lowpc)
*lowpc = pdi->lowpc;
if (pdi->highpc > *highpc)
*highpc = pdi->highpc;
if (need_pc)
*LOWPC and *HIGHPC is updated regardless of NEED_PC. When NEED_PC is
true, addrmap is updated. It would be clear to rename NEED_PC to
SET_ADDRMAP. That is what this patch does. Beside this, this patch
also adjust comments in related functions.
gdb:
2014-08-24 Yao Qi <yao@codesourcery.com>
* dwarf2read.c (scan_partial_symbols): Update comments.
Rename argument 'need_pc' with 'set_addrmap'.
（add_partial_namespace): Rename argument 'need_pc' with
'set_addrmap'.
(add_partial_module): Likewise.
(add_partial_subprogram): Likewise. Update comments.
(dwarf2_name): Fix typo.
I see the following fails on arm-none-eabi target,
print sn^M
$14 = 0x0 <_ftext>^M
(gdb) FAIL: gdb.python/py-value.exp: print sn
print sn^M
$14 = 0x0 <_ftext>^M
(gdb) FAIL: gdb.guile/scm-value.exp: print sn
as <_ftext> is unexpected. This patch is to set print symbol off to
avoid printing this.
gdb/testsuite:
2014-08-24 Yao Qi <yao@codesourcery.com>
* gdb.guile/scm-value.exp (test_lazy_strings): Set print
symbol off.
* gdb.python/py-value.exp (test_lazy_strings): Likewise.
See the description here:
https://sourceware.org/ml/gdb-patches/2014-08/msg00283.html
This patch keeps track of whether the current line has seen a
non-zero discriminator, and if so coalesces consecutive entries
for the same line (by ignoring all entries after the first).
gdb/ChangeLog:
PR 17276
* dwarf2read.c (dwarf_record_line_p): New function.
(dwarf_decode_lines_1): Ignore subsequent line number entries
for the same line if any entry had a non-zero discriminator.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-single-line-discriminators.S: New file.
* gdb.dwarf2/dw2-single-line-discriminators.c: New file.
* gdb.dwarf2/dw2-single-line-discriminators.exp: New file.
gdb/ChangeLog:
* buildsym.h (record_line_ftype): New typedef.
(record_line): Use it.
* dwarf2read.c (dwarf_record_line, dwarf_finish_line): New functions.
(dwarf_decode_lines_1): Call them.
Some gdb.python/*.exp tests fail because the .py files aren't copied
to the (remote) host. This patch is to copy needed .py files to host.
Most of gdb.python/*.exp tests do this.
As it is still controversial to delete *.py files on host, we don't do
that in this patch.
gdb/testsuite:
2014-08-22 Yao Qi <yao@codesourcery.com>
* gdb.python/py-finish-breakpoint.exp: Copy .py file to host.
* gdb.python/py-finish-breakpoint2.exp: Likewise.
* gdb.python/python.exp: Likewise. Use .py file on the host
instead of the build.
When GDB uses recent version of babeltrace, such as 1.2.x, we'll see
such error emitted from babeltrace library,
(gdb) target ctf .../gdb/testsuite/gdb.trace/actions.ctf
[error] Invalid CTF stream: content size is smaller than packet headers.
[error] Stream index creation error.
[error] Open file stream error.
The problem can be reproduce out of GDB too, using babeltrace,
$ babeltrace ./fake-packet.ctf/
[error] Invalid CTF stream: content size is smaller than packet headers.
[error] Stream index creation error.
[error] Open file stream error.
Recent babeltrace library becomes more strict on CTF, and complains
about one "faked packet" GDB adds, when saving trace data in ctf
format from GDB. babeltrace 1.1.0 has a bug that it can't read trace
data smaller than a certain size (see https://bugs.lttng.org/issues/450).
We workaround it in GDB to append some meaningless data in a faked
packet to make sure trace file is large enough (see ctf.c:ctf_end).
The babeltrace issue was fixed in 1.1.1 release. However, babeltrace
recent release (since 1.1.2) starts to complain about such faked
packet. Here is a table shows that whether faked packet or no faked
packet is "supported" by various babeltrace releases,
faked packet no faked packet
1.1.0 Yes No
1.1.1 Yes Yes
1.1.2 No Yes
1.2.0 No Yes
We decide to get rid of this workaround in GDB, and people can build GDB
with libbabeltrace >= 1.1.1. In this way, both configure and ctf.c is
simpler.
Run gdb.trace/* tests in the following combinations:
wo/ this pattch 1.1.0
w/ this patch 1.1.1
w/ this patch 1.1.2
w/ this patch 1.2.0
No test results change.
gdb:
2014-08-22 Yao Qi <yao@codesourcery.com>
* ctf.c (CTF_FILE_MIN_SIZE): Remove.
(ctf_end): Remove code.
Program received signal SIGABRT, Aborted.
[...]
(gdb) gcore foobar
Couldn't get registers: No such process.
(gdb) info threads
[...]
(gdb) gcore foobar
Saved corefile foobar
(gdb)
gcore tries to access the exited thread:
[Thread 0x7ffff7fce700 (LWP 6895) exited]
ptrace(PTRACE_GETREGS, 6895, 0, 0x7fff18167dd0) = -1 ESRCH (No such process)
Without the TRY_CATCH protection testsuite FAILs for:
gcore .../gdb/testsuite/gdb.threads/gcore-thread0.test
Cannot find new threads: debugger service failed
(gdb) FAIL: gdb.threads/gcore-thread.exp: save a zeroed-threads corefile
+
core .../gdb/testsuite/gdb.threads/gcore-thread0.test
".../gdb/testsuite/gdb.threads/gcore-thread0.test" is not a core dump: File format not recognized
(gdb) FAIL: gdb.threads/gcore-thread.exp: core0file: re-load generated corefile (bad file format)
Maybe the TRY_CATCH could be more inside update_thread_list().
Similar update_thread_list() call is IMO missing in procfs_make_note_section()
but I do not have where to verify that change.
gdb/ChangeLog
2014-08-21 Jan Kratochvil <jan.kratochvil@redhat.com>
* linux-tdep.c (linux_corefile_thread_callback): Ignore THREAD_EXITED.
(linux_make_corefile_notes): call update_thread_list, protected against
exceptions.
gdb/testsuite/ChangeLog
2014-08-21 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.threads/gcore-stale-thread.c: New file.
* gdb.threads/gcore-stale-thread.exp: New file.
This TODO has been stale for over 2 years. In bd5635a1 (1991), we
already see the comment, when we only had a bare attach_command:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/*
* TODO:
* Should save/restore the tty state since it might be that the
* program to be debugged was started on this tty and it wants
* the tty in some state other than what we want. If it's running
* on another terminal or without a terminal, then saving and
* restoring the tty state is a harmless no-op.
* This only needs to be done if we are attaching to a process.
*/
/*
* attach_command --
* takes a program started up outside of gdb and ``attaches'' to it.
* This stops it cold in its tracks and allows us to start tracing it.
* For this to work, we must be able to send the process a
* signal and we must have the same effective uid as the program.
*/
void
attach_command (args, from_tty)
char *args;
int from_tty;
{
target_attach (args, from_tty);
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Later in b5a3d2aa (1992) target_terminal_init, etc. calls are added to
attach_command, and in 7e97eb28 (1992) we see:
+ /* If we attached to the process, we might or might not be sharing
+ a terminal. Avoid printing error msg if we are unable to set our
+ terminal's process group to his process group ID. */
+ if (!attach_flag) {
+ OOPSY ("ioctl TIOCSPGRP");
Clearly the TODO has been stale for a long while.
I considered preserving the text elsewhere, but then thought the
comments in inflow.c already have all the necessary info.
gdb/ChangeLog:
* infcmd.c (attach_command): Remove comment.
Checking whether the gcore command is included in the GDB build as
proxy for checking whether core dumping is supported by the target is
useless, as gcore.o has been in COMMON_OBS since git 9b4eba8e:
2009-10-26 Michael Snyder <msnyder@vmware.com>
Hui Zhu <teawater@gmail.com>
* Makefile.in (SFILES): Add gcore.c.
(COMMON_OBS): Add gcore.o.
* config/alpha/alpha-linux.mh (NATDEPFILES): Delete gcore.o.
* config/alpha/fbsd.mh (NATDEPFILES): Ditto.
...
IOW, the command is always included in the build.
Instead, nowadays, tests bail out if actually trying to generate a
core fails with an indication the target doesn't support it. See
gdb_gcore_cmd and callers.
Tested on x86_64 Fedora 20.
gdb/testsuite/ChangeLog:
* gdb.base/gcore-buffer-overflow.exp: Remove "help gcore" test.
* gdb.base/gcore-relro-pie.exp: Likewise.
* gdb.base/gcore-relro.exp: Likewise.
* gdb.base/gcore.exp: Likewise.
* gdb.base/print-symbol-loading.exp: Likewise.
* gdb.threads/gcore-thread.exp: Likewise.
* lib/gdb.exp (gdb_gcore_cmd): Don't expect "Undefined command".
Recent gdb code refactor changes LONGEST from a macro to a typedef,
thus the use of it in aarch64-linux-nat.c is no longer valid.
2014-08-21 Bin Cheng <bin.cheng@arm.com>
* aarch64-linux-nat.c (dr_changed_t): Change the type from
unsigned LONGEST to ULONGEST.
This integrates Jan Kratochvil's nice race reproducer from PR
testsuite/12649 into the testsuite infrustructure directly.
With this, one only has to do either 'make check-read1' or 'make check
READ1="1"' to preload the read1.so library into expect.
Currently only enabled for glibc/GNU systems, and if
build==host==target.
gdb/testsuite/ChangeLog:
* Makefile.in (EXTRA_RULES, CC): New variables, get from
configure.
(EXPECT): Handle READ1 being set.
(all): Depend on EXTRA_RULES.
(check-read1, expect-read1, read1.so, read1): New rules.
* README (Testsuite Parameters): Document the READ1 make variable.
(Race detection): New section.
* configure: Regenerate.
* configure.ac: If build==host==target, and running under a
GNU/glibc system, add read1 to the extra Makefile rules.
(EXTRA_RULES): AC_SUBST it.
* lib/read1.c: New file.
gdb/ChangeLog:
* Makefile.in (check-read1): New rule.
Consider an array described in the debugging information as being
a typedef of an array type for which there is a DW_AT_data_location
attribute. Trying to print the value of that array currently yields
incorrect element values. For instance:
(gdb) print foo.three_tdef
$1 = (6293760, 0, 6293772)
The problem occurs because we check for the data_location attribute
only on the typedef type, whereas we should be checking for the
typedef's target type. As a result, GDB erroneously thinks that
there is no data_location, and therefore starts reading the array's
content from the address of the descriptor instead of the data_location
address.
gdb/ChangeLog:
* value.c (value_from_contents_and_address): Strip resolved_type's
typedef layers before checking its TYPE_DATA_LOCATION.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/data-loc.exp: Add additional tests exercising
the handling of variables declared as a typedef to an array
which a DW_AT_data_location attribute.
We would like to wrap examples, output or code snippet in comments with
blank lines, and move */ to a new line if the comment is ended with the
example.
gdb:
2014-08-20 Yao Qi <yao@codesourcery.com>
* amd64-tdep.c (amd64_classify): Add a blank line after the
example. Move "*/" to a new line.
* arm-tdep.c (arm_vfp_cprc_sub_candidate): Likewise.
* arm-wince-tdep.c (arm_pe_skip_trampoline_code): Likewise.
* dwarf2read.c (psymtab_include_file_name): Likewise.
This fixes PR symtab/14604, PR symtab/14605, and Jan's test at
https://sourceware.org/ml/gdb-patches/2014-07/msg00158.html, in a tree
with bddbbed reverted:
2014-07-22 Pedro Alves <palves@redhat.com>
* value.c (allocate_optimized_out_value): Don't mark value as
non-lazy.
The PRs are about variables described by the DWARF as being split over
multiple registers using DWARF piece information, but some of those
registers being marked as optimised out (not saved) by a later frame.
GDB currently incorrectly mishandles these partially-optimized-out
values.
Even though we can usually tell from the debug info whether a local or
global is optimized out, handling the case of a local living in a
register that was not saved in a frame requires fetching the variable.
GDB also needs to fetch a value to tell whether parts of it are
"<unavailable>". Given this, it's not worth it to try to avoid
fetching lazy optimized-out values based on debug info alone.
So this patch makes GDB track which chunks of a value's contents are
optimized out like it tracks <unavailable> contents. That is, it
makes value->optimized_out be a bit range vector instead of a boolean,
and removes the struct lval_funcs check_validity and check_any_valid
hooks.
Unlike Andrew's series which this is based on (at
https://sourceware.org/ml/gdb-patches/2013-08/msg00300.html, note some
pieces have gone in since), this doesn't merge optimized out and
unavailable contents validity/availability behind a single interface,
nor does it merge the bit range vectors themselves (at least yet).
While it may be desirable to have a single entry point that returns
existence of contents irrespective of what may make them
invalid/unavailable, several places want to treat optimized out /
unavailable / etc. differently, so each spot that potentially could
use it will need to be careful considered on case-by-case basis, and
best done as a separate change.
This fixes Jan's test, because value_available_contents_eq wasn't
considering optimized out value contents. It does now, and because of
that it's been renamed to value_contents_eq.
A new intro comment is added to value.h describing "<optimized out>",
"<not saved>" and "<unavailable>" values.
gdb/
PR symtab/14604
PR symtab/14605
* ada-lang.c (coerce_unspec_val_to_type): Use
value_contents_copy_raw.
* ada-valprint.c (val_print_packed_array_elements): Adjust.
* c-valprint.c (c_val_print): Use value_bits_any_optimized_out.
* cp-valprint.c (cp_print_value_fields): Let the common printing
code handle optimized out values.
(cp_print_value_fields_rtti): Use value_bits_any_optimized_out.
* d-valprint.c (dynamic_array_type): Use
value_bits_any_optimized_out.
* dwarf2loc.c (entry_data_value_funcs): Remove check_validity and
check_any_valid fields.
(check_pieced_value_bits): Delete and inline ...
(check_pieced_synthetic_pointer): ... here.
(check_pieced_value_validity): Delete.
(check_pieced_value_invalid): Delete.
(pieced_value_funcs): Remove check_validity and check_any_valid
fields.
(read_pieced_value): Use mark_value_bits_optimized_out.
(write_pieced_value): Switch to use
mark_value_bytes_optimized_out.
(dwarf2_evaluate_loc_desc_full): Copy the value contents instead
of assuming the whole value is optimized out.
* findvar.c (read_frame_register_value): Remove special handling
of optimized out registers.
(value_from_register): Use mark_value_bytes_optimized_out.
* frame-unwind.c (frame_unwind_got_optimized): Use
mark_value_bytes_optimized_out.
* jv-valprint.c (java_value_print): Adjust.
(java_print_value_fields): Let the common printing code handle
optimized out values.
* mips-tdep.c (mips_print_register): Remove special handling of
optimized out registers.
* opencl-lang.c (lval_func_check_validity): Delete.
(lval_func_check_any_valid): Delete.
(opencl_value_funcs): Remove check_validity and check_any_valid
fields.
* p-valprint.c (pascal_object_print_value_fields): Let the common
printing code handle optimized out values.
* stack.c (read_frame_arg): Remove special handling of optimized
out values. Fetch both VAL and ENTRYVAL before comparing
contents. Adjust to value_available_contents_eq rename.
* valprint.c (valprint_check_validity)
(val_print_scalar_formatted): Use value_bits_any_optimized_out.
(val_print_array_elements): Adjust.
* value.c (struct value) <optimized_out>: Now a VEC(range_s).
(value_bits_any_optimized_out): New function.
(value_entirely_covered_by_range_vector): New function, factored
out from value_entirely_unavailable.
(value_entirely_unavailable): Reimplement.
(value_entirely_optimized_out): New function.
(insert_into_bit_range_vector): New function, factored out from
mark_value_bits_unavailable.
(mark_value_bits_unavailable): Reimplement.
(struct ranges_and_idx): New struct.
(find_first_range_overlap_and_match): New function, factored out
from value_available_contents_bits_eq.
(value_available_contents_bits_eq): Rename to ...
(value_contents_bits_eq): ... this. Check both unavailable
contents and optimized out contents.
(value_available_contents_eq): Rename to ...
(value_contents_eq): ... this.
(allocate_value_lazy): Remove reference to the old optimized_out
boolean.
(allocate_optimized_out_value): Use
mark_value_bytes_optimized_out.
(require_not_optimized_out): Adjust to check whether the
optimized_out vec is empty.
(ranges_copy_adjusted): New function, factored out from
value_contents_copy_raw.
(value_contents_copy_raw): Also copy the optimized out ranges.
Assert the destination ranges aren't optimized out.
(value_contents_copy): Update comment, remove call to
require_not_optimized_out.
(value_contents_equal): Adjust to check whether the optimized_out
vec is empty.
(set_value_optimized_out, value_optimized_out_const): Delete.
(mark_value_bytes_optimized_out, mark_value_bits_optimized_out):
New functions.
(value_entirely_optimized_out, value_bits_valid): Delete.
(value_copy): Take a VEC copy of the 'optimized_out' field.
(value_primitive_field): Remove special handling of optimized out.
(value_fetch_lazy): Assert that lazy values have no unavailable
regions. Use value_bits_any_optimized_out. Remove some special
handling for optimized out values.
* value.h: Add intro comment about <optimized out> and
<unavailable>.
(struct lval_funcs): Remove check_validity and check_any_valid
fields.
(set_value_optimized_out, value_optimized_out_const): Remove.
(mark_value_bytes_optimized_out, mark_value_bits_optimized_out):
New declarations.
(value_bits_any_optimized_out): New declaration.
(value_bits_valid): Delete declaration.
(value_available_contents_eq): Rename to ...
(value_contents_eq): ... this, and extend comments.
gdb/testsuite/
PR symtab/14604
PR symtab/14605
* gdb.dwarf2/dw2-op-out-param.exp: Remove kfail branches and use
gdb_test.
echo 'void f(char *s){}main(){f((char *)1);}'|gcc -g -x c -;../gdb ./a.out -ex 'b f' -ex r
====ERROR: AddressSanitizer: heap-buffer-overflow on address 0x6020000aaccf at pc 0x96eea7 bp 0x7fff75bdbc90 sp 0x7fff75bdbc80
READ of size 1 at 0x6020000aaccf thread T0
#0 0x96eea6 in extract_unsigned_integer .../gdb/findvar.c:108
#1 0x9df02b in val_print_string .../gdb/valprint.c:2513
[...]
0x6020000aaccf is located 1 bytes to the left of 8-byte region [0x6020000aacd0,0x6020000aacd8)
allocated by thread T0 here:
#0 0x7f45fad26b97 in malloc (/lib64/libasan.so.1+0x57b97)
#1 0xdb3409 in xmalloc common/common-utils.c:45
#2 0x9d8cf9 in read_string .../gdb/valprint.c:1845
#3 0x9defca in val_print_string .../gdb/valprint.c:2502
[..]
====ABORTING
gdb/
2014-08-18 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix -fsanitize=address on unreadable inferior strings.
* valprint.c (val_print_string): Fix access before BUFFER.
This comment is no longer true for watchpoints since commit 31e77af2
(PR breakpoints/7143 - Watchpoint does not trigger when first set).
gdb/testsuite/
* gdb.base/watchpoint-hw-hit-once.c (main): Update comment.
I thought that this home made implementation of a vector could be
replaced by the more standard VEC. The implementation seems to predate
the introduction of vec.h, so that would explain why it exists.
Ran make check before and after, no new failures.
gdb/ChangeLog:
2014-08-19 Simon Marchi <simon.marchi@ericsson.com>
* target.c (target_struct_size): Remove.
(target_struct_allocsize): Remove.
(DEFAULT_ALLOCSIZE): Remove.
(target_ops_p): New typedef.
(DEF_VEC_P (target_ops_p)): New vector type.
(target_structs): Change type to VEC (target_ops_p).
(add_target_with_completer): Replace "push" code by VEC_safe_push.
(find_default_run_target): Rewrite for loop following changes to
target_structs.
The given type is expected to always be a TYPE_CODE_PTR, for which
resolve_dynamic_type does nothing. So this patch removes this call.
gdb/ChangeLog:
* value.c (value_from_pointer): Remove use of resolve_dynamic_type.
Adjust code accordingly. Adjust function description comment.
In gdb.base/watchpoint-hw-hit-once.exp, test scans source and set
breakpoint on the line having "break-at-exit",
gdb_breakpoint [gdb_get_line_number "break-at-exit"]
However, in watchpoint-hw-hit-once.c, there are two lines having
this key word:
dummy = 1; /* Stub to catch break-at-exit after WATCHEE has been hit. */
dummy = 2; /* break-at-exit */
so the test sets breakpoint on the first one, while I think it is
expected to set breakpoint on the second one, as far as I can tell
from the comments in watchpoint-hw-hit-once.c:
/* Stub lines are present as no breakpoints/watchpoint gets hit if current PC
already stays on the line PC while entering "step"/"continue". */
This patch is to change the source matching pattern so that test
can correctly set breakpoint on the right line. This patch fixes
a fail we found on arm-none-eabi target.
(gdb) PASS: gdb.base/watchpoint-hw-hit-once.exp: continue
continue^M
Continuing.^M
^M
*** EXIT code 0^M
[Inferior 1 (Remote target) exited normally]^M
(gdb) FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue to break-at-exit (the program exited)
Run it again on x86_64-linux, no result changes.
gdb/testsuite:
2014-08-19 Yao Qi <yao@codesourcery.com>
* gdb.base/watchpoint-hw-hit-once.exp: Set breakpoint on the
right line.
Hi,
When we pass "-mfloat-abi=hard" flag in the GDB testing, we see the
following fails,
FAIL: gdb.base/callfuncs.exp: p t_float_complex_values(fc1, fc2)
FAIL: gdb.base/callfuncs.exp: p t_float_complex_many_args(fc1, fc2, fc3, fc4, fc1, fc2, fc3, fc4, fc1, fc2, fc3, fc4, fc1, fc2, fc3, fc4)
FAIL: gdb.base/callfuncs.exp: p t_double_complex_values(dc1, dc2)
FAIL: gdb.base/callfuncs.exp: p t_double_complex_many_args(dc1, dc2, dc3, dc4, dc1, dc2, dc3, dc4, dc1, dc2, dc3, dc4, dc1, dc2, dc3, dc4)
FAIL: gdb.base/callfuncs.exp: p t_long_double_complex_values(ldc1, ldc2)
FAIL: gdb.base/callfuncs.exp: p t_long_double_complex_many_args(ldc1, ldc2, ldc3, ldc4, ldc1, ldc2, ldc3, ldc4, ldc1, ldc2, ldc3, ldc4, ldc1, ldc2, ldc3, ldc4)
FAIL: gdb.base/callfuncs.exp: call inferior func with struct - returns float _Complex
FAIL: gdb.base/callfuncs.exp: call inferior func with struct - returns double _Complex
The hard-VFP ABI was supported by GDB overal, done by this patch
https://sourceware.org/ml/gdb-patches/2009-07/msg00686.html but
"vectors and complex types are not currently supported", mentioned in
the patch. As a result, these tests fail.
This patch is to support _Complex types in hard-VFP abi. As specified
in "7.1.1, Procedure Call Standard for the ARM Arch", the layout of
_Complex types is a struct, which is identical to the layout on amd64,
so I copy Mark's comments to amd64 support.
Regression tested on arm-none-eabi target. OK to apply?
gdb:
2014-08-19 Yao Qi <yao@codesourcery.com>
* arm-tdep.c (arm_vfp_cprc_sub_candidate): Handle _Complex
types.
Directories that don't use libtool need to add -ldl (on most *nix
hosts) to provide dlopen for libbfd.
config/
* plugins.m4 (AC_PLUGINS): If plugins are enabled, add -ldl to
LIBS via AC_SEARCH_LIBS.
gdb/
* acinclude.m4 (GDB_AC_CHECK_BFD): Don't add -ldl.
* config.in: Regenerate.
sim/ppc/
* configure.ac: Invoke AC_PLUGINS.
* config.in: Regenerate.
and regen lots of configure files.
This introduces common-debug.h. This holds the functions debug_printf
and debug_vprintf, two functions that the common code can use to print
debugging messages. Clients of the common code are expected to
implement debug_vprintf; a debug_vprintf function is written from
scratch for GDB, and gdbserver's existing debug_printf is repurposed
as debug_vprintf.
common/agent.c is changed to use debug_vprintf rather than
defining the macro DEBUG_AGENT depending on GDBSERVER.
nat/i386-dregs.c is changed to use the externally-implemented
debug_printf, rather than defining it itself.
gdb/ChangeLog:
* common/common-debug.h: New file.
* common/common-debug.c: Likewise.
* debug.c: Likewise.
* Makefile.in (SFILES): Add common/common-debug.c.
(HFILES_NO_SRCDIR): Add common/common-debug.h.
(COMMON_OBS): Add common-debug.o and debug.o.
(common-debug.o): New rule.
* common/common-defs.h: Include common-debug.h.
* common/agent.c (debug_agent_printf): New function.
(DEBUG_AGENT): Redefine.
* nat/i386-dregs.c (debug_printf): Undefine.
gdb/gdbserver/ChangeLog:
* Makefile.in (SFILES): Add common/common-debug.c.
(OBS): Add common-debug.o.
(common-debug.o): New rule.
* debug.h (debug_printf): Don't declare.
* debug.c (debug_printf): Renamed and rewritten as...
(debug_vprintf): New function.
This commit moves the inclusion of print-utils.h to common-defs.h
and removes all other inclusions.
gdb/ChangeLog:
* common/common-defs.h: Include print-utils.h.
* utils.h: Do not include print-utils.h.
gdb/gdbserver/ChangeLog:
* utils.h: Do not include print-utils.h.
This introduces common-types.h. This file defines various standard
types used by gdb and gdbserver.
Currently these types are conditionally defined based on GDBSERVER.
The long term goal is to remove all such tests; however, this is
difficult as currently gdb uses definitions from BFD. In the meantime
this is still a step in the right direction.
gdb/ChangeLog:
* common/common-types.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add common/common-types.h.
* common/common-defs.h: Include common-types.h.
* defs.h (gdb_byte, CORE_ADDR, CORE_ADDR_MAX, LONGEST)
(ULONGEST): Remove.
gdb/gdbserver/ChangeLog:
* server.h: Add static assertion.
(gdb_byte, CORE_ADDR, LONGEST, ULONGEST): Remove.
This introduces common/errors.h. This holds some error- and warning-
related declarations that can be used by the code in common, nat and
target. Some of the declared functions must be provided by the client
as documented by the header file comments.
gdb/ChangeLog:
* common/errors.h: New file.
* common/errors.c: Likewise.
* Makefile.in (SFILES): Add common/errors.c.
(HFILES_NO_SRCDIR): Add common/errors.h.
(COMMON_OBS): Add errors.o.
(errors.o): New rule.
* common/common-defs.h: Include errors.h.
* utils.h (perror_with_name, error, verror, warning, vwarning):
Don't declare.
* common/common-utils.h: (malloc_failure, internal_error):
Likewise.
gdb/gdbserver/ChangeLog:
* Makefile.in (SFILES): Add common/errors.c.
(OBS): Add errors.o.
(IPA_OBS): Add errors-ipa.o.
(errors.o): New rule.
(errors-ipa.o): Likewise.
* utils.h (perror_with_name, error, warning): Don't declare.
* utils.c (warning): Renamed and rewritten as...
(vwarning): New function.
(error): Renamed and rewritten as...
(verror): New function.
(internal_error): Renamed and rewritten as...
(internal_verror): New function.
While working on internal_vproblem I noticed that the error/warning
message is suppressed if problem->should_quit is internal_problem_yes
or internal_problem_no. This behaviour seems wrong. This commit
modifies internal_vproblem to emit the message regardless of the
user's settings.
gdb/
2014-08-19 Gary Benson <gbenson@redhat.com>
* utils.c (internal_vproblem): Always print the message.
The testcase generates an assembly file where a second DW_AT_upper_bound
attribute gets generated in the array range. This was definitely
unintentional, and I only noticed this after pushing the testcase,
when dumping one more time the DWARF data using readelf.
This patch fixes it.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/data-loc.exp: Remove second DW_AT_upper bound
attribute in array range.
This testcase allows us to test the proper processing of both
DW_AT_data_location and DW_OP_push_object_address using a hand-crafted
testcase duplicating how we expect the Ada compiler to represent
unbounded arrays.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/data-loc.c, gdb.dwarf2/data-loc.exp: New files.
Consider an Ada array type where the DWARF debugging info for
at least one of the bounds involves an expression containing
a DW_OP_push_object_address operation. Trying to "ptype" that
type currently yields:
(gdb) ptype foo.array_type
type = array (Location address is not set.
This patch improves ada-typeprint by adding handling of the situation
where an array range type has dynamic bounds. In that case, it prints
the array bounds using Ada's typical syntax for unbounded ranges "<>":
(gdb) ptype array_type
type = array (<>) of integer
gdb/ChangeLog:
* ada-typeprint.c (type_is_full_subrange_of_target_type):
Return 0 if TYPE is dynamic.
(print_range): Add handling of dynamic ranges.
gdb/ChangeLog:
* gdbtypes.h (struct main_type): Add field "data_location".
(TYPE_DATA_LOCATION, TYPE_DATA_LOCATION_BATON)
(TYPE_DATA_LOCATION_ADDR, TYPE_DATA_LOCATION_KIND): New macros.
* gdbtypes.c (is_dynamic_type): Return 1 if the type has
a dynamic data location.
(resolve_dynamic_type): Add DW_AT_data_location handling.
(copy_recursive, copy_type): Copy the data_location information
when present.
* dwarf2read.c (set_die_type): Add DW_AT_data_location handling.
* value.c (value_from_contents_and_address): Add
DW_AT_data_location handling.
Now that the OP_VAR_VALUE section of this function has been reorganized
a bit, we can fall-back on standard evaluation when static fixing is
not required. This patch does that, but being exclusive about when
static fixing has to be used, rather than doing it all the time when
noside is EVAL_AVOID_SIDE_EFFECTS.
This will pave the way for later when we want to evaluate entities
that have no GNAT encodings related to them but dynamic properties
instead. In that case, we expect the standard evaluation to resolve
those dynamic properties for us, even in no-side-effect mode.
gdb/ChangeLog:
* ada-lang.c (ada_evaluate_subexp) <OP_VAR_VALUE>:
When noside is EVAL_AVOID_SIDE_EFFECTS, only return a statically
fixed value for records and unions for which some GNAT encodings
are present.
The OP_VAR_VALUE branch in ada_evaluate_subexp is written with
multiple "if ... else if ... else if ... else ..." block. But
in practice, these blocks all either goto out of that block of
code, or return.
This patch rewrites this code slightly by replacing the "else if"-s
by simple "if"s. This should better reflect the ideal processing
where we try to do a standard eval whenever possible, and only
do something else when the standard eval does not work. On a pratical
level, this patch makes it easier to fall through to the default
processing when none of the special situations are detected, thus
making it easier to add more handlers of those special situations;
or to remove them as they no longer become necessary!
gdb/ChangeLog:
* ada-lang.c (ada_evaluate_subexp) <OP_VAR_VALUE>: Slight code
rewrite to avoid "else if" and "else" constructs. Should be
a no-op in practice.
I just happen to notice that a lexical block was missing one
indentation level.
gdb/ChangeLog:
* ada-lang.c (ada_evaluate_subexp) <OP_VAR_VALUE>: Fix identation
of lexical block.
This is a fix for PR c++/17132.
If this new argument is set to EVAL_AVOID_SIDE_EFFECTS, then the object's
memory will not be read while picking the best overload match.
gdb/
* eval.c: Update all calls to find_overload_match.
* valarith.c: Likewise.
(value_user_defined_cpp_op, value_user_defined_op): New
argument NOSIDE. Update all callers.
* valops.c (find_overload_match): New argument NOSIDE.
* value.h (find_overload_match): Update signature.
gdb/testsuite
* gdb.cp/pr17132.cc: New file.
* gdb.cp/pr17132.exp: New file.
gdb/
* python/lib/gdb/command/xmethods.py (set_xm_status1): Use the
'items' methods instead of 'iteritems' method on dictionaries.
gdb/testsuite/
* gdb.python/py-xmethods.py (A_getarrayind)
(E_method_char_worker.__call__, E_method_int_worker.__call__):
Use 'print' with function call syntax.
(E_method_matcher.match): Fix tab vs space indentation mixup.
This include is needed because gdbarch_dummy_id needs the full
definition of struct frame_id.
gdb/ChangeLog:
* gdbarch.sh: #include "frame.h" in gdbarch.h. Delete "struct
frame_info" partial declaration.
* gdbarch.h: Regenerate.
Tested on x86_64-linux by rebuilding GDB.
I added proc generate_tracefile in this patch
https://sourceware.org/ml/gdb-patches/2014-03/msg00591.html but
tfile.exp isn't skipped as changelog entry said:
* gdb.trace/tfile.exp: Skip the test if generate_tracefile
return 0.
it is a mistake I made at the last minute. Patch below fixed it.
gdb/testsuite:
2014-08-15 Yao Qi <yao@codesourcery.com>
* gdb.trace/tfile.exp: Return -1 if generate_tracefile returns
false.
GDB in default prints the symbol associated on an address, and tests
assume that there is no symbol on address zero. However, on bare
metal target, address may be mapped to zero and there may be a
symbol. Then, some tests fail as below:
print const_cast<void *> (0)^M
$8 = (void *) 0x0 <_ftext>^M
(gdb) FAIL: gdb.cp/casts.exp: const_cast of 0
p acp->c1^M
$9 = (A *) 0x0 <_ftext>^M
(gdb) FAIL: gdb.cp/class2.exp: p acp->c1
This patch is to set print symbol off in these tests, like what
I did previously https://sourceware.org/ml/gdb-patches/2014-07/msg00257.html
gdb/testsuite:
2014-08-15 Yao Qi <yao@codesourcery.com>
* gdb.cp/casts.exp: Set print symbol off.
* gdb.cp/class2.exp: Likewise.
* gdb.cp/overload.exp: Likewise.
* gdb.cp/templates.exp: Likewise.
Hi,
Parameter 'pst' of function dwarf_decode_lines_1 isn't used except
to compute decode_for_pst_p, which has been got in the caller
dwarf_decode_lines. I wonder it would be good if we just pass
'decode_for_pst_p'.
gdb:
2014-08-15 Yao Qi <yao@codesourcery.com>
* dwarf2read.c (dwarf_decode_lines_1): Remove parameter 'pst'.
Add parameter 'decode_for_pst_p'. Callers update.
This patch is to fix the build error when GDB is configured as:
CFLAGS=-Wall ./configure --with-babeltrace; make
This patch adds one line of code in configure test to use local
variable 'pos'.
Note that we append -Werror to CFLAGS to catch the warning related to
assignment to scope. See more in this thread
https://sourceware.org/ml/gdb-patches/2014-08/msg00045.html
2014-08-13 Yao Qi <yao@codesourcery.com>
PR build/17104
* configure.ac: Use local variable 'pos'.
* configure: Regenerated.
* solib.c (solib_read_symbols): Delete "Loaded symbols for ..."
message, it is redundant with "Reading symbols from ..." message.
testsuite/
* gdb.base/print-symbol-loading.exp (test_load_core): Update.
(test_load_shlib): Update.
The code becomes dead as GDB evolves. In 2003, Andrew Cagney post patch
https://sourceware.org/ml/gdb-patches/2003-10/msg00511.html to add target
read/write partial methods. They support query buffer size when both
OFFSET and LEN is zero, and it was used in avr-tdep.c and kod.c. Then,
Daniel added target_read_object_alloc and avr-tdep.c switches to use that
in patch https://sourceware.org/ml/gdb-patches/2006-07/msg00009.html
From then on, GDB on longer queries the buffer size, so the code
returning packet size in remote_xfer_partial became dead.
PR 17060 is duplicated of PR 9053, so I mention the latter in the
ChangeLog entry. Rebuild GDB with this patch. OK to apply?
I'll mark PR 17060 as duplicated once the patch is applied.
gdb:
2014-08-09 Yao Qi <yao@codesourcery.com>
PR remote/9053
* remote.c (remote_xfer_partial): Remove dead code.
I find some gdb.python tests fail on arm-none-eabi target, because the
tests assume that memory on address 0x is inaccessible. Some tests
(in gdb.base) are aware of this, so do a "x 0" check first. However,
the code is copy-n-paste.
This patch is to move the "x 0" check to a procedure in lib/gdb.exp,
and get needed tests call it. The original code matches pattern
"0x0:\[ \t\]*Error accessing memory address 0x0\r\n$gdb_prompt $", but
I remove it from the new proc is_address_zero_readable, because GDB
doesn't emit such message any more.
gdb/testsuite:
2014-08-09 Yao Qi <yao@codesourcery.com>
* gdb.base/display.exp: Invoke is_address_zero_readable.
* gdb.guile/scm-value.exp (test_value_in_inferior): Likewise.
* gdb.python/py-value.exp (test_value_in_inferior): Likewise.
* gdb.base/hbreak-unmapped.exp: Return if
is_address_zero_readable returns true.
* gdb.base/signest.exp: Likewise.
* gdb.base/signull.exp: Likewise.
* gdb.base/sigbpt.exp: Likewise.
* gdb.guile/scm-disasm.exp: Do the test if
is_address_zero_readable returns false.
* gdb.guile/scm-pretty-print.exp (run_lang_tests): Likewise.
* gdb.python/py-arch.exp: Likewise.
* gdb.python/py-prettyprint.exp (run_lang_tests): Likewise.
* lib/gdb.exp (is_address_zero_readable): New proc.
When I fix a bug in gdb.mi/mi-var-display.exp, I find its test
messages aren't unique, which makes some confusions for me.
$ cat testsuite/gdb.sum | grep "PASS" | sort | uniq -c | sort -n
...
2 PASS: gdb.mi/mi-var-display.exp: set format variable bar
2 PASS: gdb.mi/mi-var-display.exp: set format variable foo
2 PASS: gdb.mi/mi-var-display.exp: set format variable weird.func_ptr
2 PASS: gdb.mi/mi-var-display.exp: set format variable weird.func_ptr_ptr
2 PASS: gdb.mi/mi-var-display.exp: show format variable foo
3 PASS: gdb.mi/mi-var-display.exp: eval variable foo
This patch is to make test messages in mi-var-display.exp unique.
gdb/testsuite:
2014-08-09 Yao Qi <yao@codesourcery.com>
PR testsuite/13443
* gdb.mi/mi-var-display.exp: Make test messages unique.
Also rewrite the 'supply_regset' method, making it platform
independent. To avoid code duplication, move the logic for both to a
register map in regcache_map_entry format.
In order to provide 'collect_regset' support, the generic function
regcache_collect_regset is exploited. Since this requires writing
appropriate register maps, these can be used for supply_regset as
well.
Rather than supplying own supply/collect functions, use the generic
functions regcache_supply_regset and regcache_collect_regset instead.
The register maps are rewritten accordingly and become much shorter
(and better readable) than before.
These functions are intended to suit all targets that don't require too
special logic in their regset supply/collect methods. Having such
generic functions helps reducing target-specific complexity.
The regset structure's 'descr' field is intended to represent some
kind of "register map". Thus, before making more use of it, this
change renames it to 'regmap' and adjusts the comment appropriately.
(See: https://sourceware.org/ml/gdb-patches/2014-05/msg00664.html)
I run splint in gdb source and get the following warnings:
../../../git/gdb/corelow.c:740: Return value type int does not match declared type enum target_xfer_status: 0
'TARGET_XFER_EOF' (enum target_xfer_status) is expected to be returned,
but 0 is returned. This patch is to replace 0 with TARGET_XFER_EOF
in the implementations of to_xfer_partial.
gdb:
2014-08-07 Yao Qi <yao@codesourcery.com>
* corelow.c (core_xfer_partial): Replace 0 with TARGET_XFER_EOF.
* remote-m32r-sdi.c (m32r_xfer_memory): Likewise.
* remote.c (remote_read_bytes): Likewise.
When I read the comments to field 'u' of struct dwarf2_per_cu_data,
I don't think the comments say anything useful. I update it per
my understanding.
gdb:
2014-08-07 Yao Qi <yao@codesourcery.com>
* dwarf2read.c (struct dwarf2_per_cu_data) <u>: Tweak comments.
This patch is to fix PR remote/17230, which is a leftover of the
to_xfer_partial interface change. I tried splint and it reprots this
problem like this,
../../../git/gdb/remote-mips.c:2236: Return value type unsigned long long does not match declared type enum target_xfer_status: len
and this problem only exists in remote-mips.c.
gdb:
2014-08-07 Yao Qi <yao@codesourcery.com>
PR remote/17230
* remote-mips.c (mips_xfer_memory): Set *xfered_len and return
TARGET_XFER_OK instead of 0.
This commit moves the inclusion of errno.h to common-defs.h and
removes all other inclusions. Note that prior to this commit
server.h included errno.h protected by "#ifdef HAVE_ERRNO_H".
This protection was added with the Windows CE port, which is
currently broken. Since no other platform needs this, I have
removed the protection and the configury to support it.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include errno.h.
* defs.h: Do not include errno.h.
* ada-typeprint.c: Likewise.
* c-typeprint.c: Likewise.
* core-regset.c: Likewise.
* corefile.c: Likewise.
* corelow.c: Likewise.
* event-loop.c: Likewise.
* f-typeprint.c: Likewise.
* gnu-nat.c: Likewise.
* go32-nat.c: Likewise.
* i386gnu-nat.c: Likewise.
* m2-typeprint.c: Likewise.
* nat/linux-btrace.c: Likewise.
* p-typeprint.c: Likewise.
* procfs.c: Likewise.
* remote-sim.c: Likewise.
* rs6000-nat.c: Likewise.
* target.c: Likewise.
* typeprint.c: Likewise.
* ui-file.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* configure.ac (AC_CHECK_HEADERS): Remove errno.h.
* configure: Regenerate.
* config.in: Likewise.
* server.h: Do not include errno.h.
* event-loop.c: Likewise.
* hostio-errno.c: Likewise.
* linux-low.c: Likewise.
* remote-utils.c: Likewise.
* spu-low.c: Likewise.
* utils.c: Likewise.
* gdbreplay.c: Unconditionally include errno.h.
Gary Benson
Doug Evans
Yao Qi
Sergio Durigan Junior
Patrick Palka
Jan Kratochvil
Pedro Alves
Will Newton
Joel Brobecker
Simon Marchi
Alan Modra
David Blaikie
Siva Chandra
Eli Zaretskii
Doug Evans
Andreas Arnez