This commit moves the inclusion of common-utils.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include common-utils.h.
* defs.h: Do not include common-utils.h.
* common/gdb_assert.h: Likewise.
* darwin-nat.h: Likewise.
* nat/linux-btrace.c: Likewise.
* target/waitstatus.h: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include common-utils.h.
This commit moves the inclusion of ptid.h to common-defs.h and removes
all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include ptid.h.
* defs.h: Do not include ptid.h.
* inferior.h: Likewise.
* infrun.h: Likewise.
* nat/linux-btrace.h: Likewise.
* nat/linux-osdata.h: Likewise.
* target/waitstatus.h: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include ptid.h.
* notif.h: Likewise.
This commit moves the inclusion of gdb_locale.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include gdb_locale.h.
* defs.h: Do not include gdb_locale.h.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include gdb_locale.h.
This commit moves the inclusion of gdb/signals.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include gdb/signals.h.
* defs.h: Do not include gdb/signals.h.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include gdb/signals.h.
* win32-low.c: Likewise.
This commit moves the inclusion of pathmax.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include pathmax.h.
* defs.h: Do not include pathmax.h.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include pathmax.h.
This commit moves the inclusion of libiberty.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include libiberty.h.
* defs.h: Do not include libiberty.h.
* common/queue.h: Likewise.
* cp-name-parser.y: Likewise.
* mi/mi-cmd-catch.c: Likewise.
* python/python.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include libiberty.h.
* linux-bfin-low.c: Likewise.
This commit moves the inclusion of ansidecl.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include ansidecl.h.
* defs.h: Do not include ansidecl.h.
* common/buffer.h: Likewise.
* common/common-utils.h: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include ansidecl.h.
This commit moves the inclusion of stdarg.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include stdarg.h.
* defs.h: Do not include stdarg.h.
* ada-lang.c: Likewise.
* common/common-utils.h: Likewise.
* guile/scm-string.c: Likewise.
* guile/scm-utils.c: Likewise.
* m32c-tdep.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include stdarg.h.
* nto-low.c: Likewise.
I saw this gem of not so legible code in solib-svr4.c (scan_dyntag):
if (dyn_tag == dyntag)
and thought it deserved a small rename.
This just renames variables to be a bit more clear for those who read the
code. I also constified the parameter because, why not. The same was
done in scan_dyntag_auxv as well.
Tested only by rebuilding, since the change was done mechanically.
gdb/Changelog:
2014-08-01 Simon Marchi <simon.marchi@ericsson.com>
* solib-svr4.c (scan_dyntag): Rename dyntag and dyn_tag variables.
(scan_dyntag_auxv): Same.
gdbserver's init_register_cache has some preprocessor conditionals
awkwardly nested around an if..else block. This commit moves the
conditionals inside the braces to make the code more readable.
gdb/gdbserver/
2014-08-06 Gary Benson <gbenson@redhat.com>
* regcache.c (init_register_cache): Move conditionals inside if.
File x86-linux-nat.h is included twice in amd64-linux-nat.c and
i386-linux-nat.c. This patch is to remove one.
gdb:
2014-08-06 Yao Qi <yao@codesourcery.com>
* amd64-linux-nat.c: Remove duplicated include
"x86-linux-nat.h".
* i386-linux-nat.c: Likewise.
This commit replaces a hardwired target-is-async check.
gdb/gdbserver/
2014-08-06 Gary Benson <gbenson@redhat.com>
* linux-low.c (linux_supports_non_stop): Use target_is_async_p.
When I read dwarf_decode_lines_1 comments today, it should be called
"special opcode" rather than "special operand", as said in DWARF spec.
It is obvious to me. I'll push it in if no comments in three days.
gdb:
2014-08-06 Yao Qi <yao@codesourcery.com>
* dwarf2read.c (dwarf_decode_lines_1): Replace "Special
operand" with "Special opcode" in comments.
This commit removes the pointless function initialize_interps.
gdb/
2014-08-05 Gary Benson <gbenson@redhat.com>
* interps.c (initialize_interps): Remove prototype.
(interpreter_initialized): Remove static global.
(interp_add): Do not call initialize_interps.
(initialize_interps): Remove function.
Right now, "set debug target" acts a bit strangely.
Most target APIs only notice that it has changed when the target stack
is changed in some way. This is because many methods implement the
setting using the special debug target. However, a few spots do
change their behavior immediately -- any place explicitly checking
"targetdebug".
Some of this peculiar behavior is documented. However, I think that
it just isn't very useful for it to work this way. So, this patch
changes "set debug target" to take effect immediately in all cases.
This is done by simply calling update_current_target when the setting
is changed.
This required one small change in the test suite. Here a test was
expecting the current behavior.
Built and regtested on x86-64 Fedora 20.
2014-08-04 Tom Tromey <tromey@redhat.com>
* target.c (set_targetdebug): New function.
(initialize_targets): Pass set_targetdebug when creating "set
debug target".
2014-08-04 Tom Tromey <tromey@redhat.com>
* gdb.texinfo (Debugging Output): Update for change to "set debug
target".
2014-08-04 Tom Tromey <tromey@redhat.com>
* gdb.base/sss-bp-on-user-bp-2.exp: Expect output from "set debug
target 0".
This fixes a test suite regession that Yao noticed.
This test checks for some specific "target debug" output
that has changed since the test was written.
2014-08-04 Tom Tromey <tromey@redhat.com>
* gdb.base/sss-bp-on-user-bp-2.exp: Match "to_resume", not
"target_resume".
After applying hash 43662968, gdb.1 and other man pages are not added
target triplet even if we configure with --target=.
It causes conflicts on some distributions.
And uninstall rules requires $(transform) variable.
gdb/doc/ChangeLog:
* Makefile.in (transform): New variable.
(install-man1, install-man5): Apply $(transform) to man file names.
Tested by installing both native and cross debugger.
In Ada, variable-sized field can be located at any position of
a structure. Consider for instance the following declarations:
Dyn_Size : Integer := 1;
type Table is array (Positive range <>) of Integer;
type Inner is record
T1 : Table (1 .. Dyn_Size) := (others => 1);
T2 : Table (1 .. Dyn_Size) := (others => 2);
end record;
type Inner_Array is array (1 .. 2) of Inner;
type Outer is
record
I0 : Integer := 0;
A1 : Inner_Array;
Marker : Integer := 16#01020304#;
end record;
Rt : Outer;
What this does is declare a variable "Rt" of type Outer, which
contains 3 fields where the second (A1) is of type Inner_Array.
type Inner_Array is an array with 2 elements of type Inner.
Because type Inner contains two arrays whose upper bound depend
on a variable, the size of the array, and therefore the size of
type Inner is dynamic, thus making field A1 a dynamically-size
field.
When trying to print the value of Rt, we hit the following limitation:
(gdb) print rt
Attempt to resolve a variably-sized type which appears in the interior of
a structure type
The limitation was somewhat making sense in C, but needs to be lifted
for Ada. This patch mostly lifts that limitation. As a result of this
patch, the type length computation had to be reworked a little bit.
gdb/ChangeLog:
* gdbtypes.c (resolve_dynamic_struct): Do not generate an error
if detecting a variable-sized field that is not the last field.
Fix struct type length computation.
gdb/testsuite/ChangeLog:
* gdb.base/vla-datatypes.c (vla_factory): Add new variable
inner_vla_struct_object_size.
* gdb.base/vla-datatypes.exp: Adjust last test, and mark it
as xfail.
This is a trace which would have been useful when trying to understand
why the debugger was not decoding the stream of unwind codes I was
expecting. This patch adds a trace first informing us that we are
following the unwind info to the next unwind record in that chain.
gdb/ChangeLog:
* amd64-windows-tdep.c (amd64_windows_frame_decode_insns):
Add debug trace.
On x86_64-windows, GDB is unable to unwind past some code in
mswsock.dll. For instance:
(gdb) bt
#0 0x00000000778712fa in ntdll!ZwWaitForSingleObject ()
from C:\Windows\SYSTEM32\ntdll.dll
#1 0x000007fefcfb0f75 in WSPStartup ()
from C:\Windows\system32\mswsock.dll
Backtrace stopped: previous frame inner to this frame (corrupt stack?)
The UNWIND_INFO record for frame #1's PC has a UNW_FLAG_CHAININFO
flag, and so after having decoded this unwind record, GDB's decoder
next tries to locate the next unwind record on the chain. Unfortunately,
the location of that unwind info appears to be miscomputed. This is
the expression used:
chain_vma = cache->image_base + unwind_info
+ sizeof (ex_ui) + ((codes_count + 1) & ~1) * 2 + 8;
The chain-info is expected to be right after the "Unwind codes
array" which is itself after all the fields of ex_ui's struct.
So the "+ 8" offset at the end should not be there.
Because of that extra offset, we were reading no longer processing
correct unwind info, leading the unwinder computing the wrong frame
size, computing the wrong return address, etc.
gdb/ChangeLog:
* amd64-windows-tdep.c (amd64_windows_frame_decode_insns):
Remove "+ 8" offset in computation of CHAIN_VMA.
This commit removes all inclusions of defs.h and server.h from header
files.
gdb/
2014-07-31 Gary Benson <gbenson@redhat.com>
* common/btrace-common.h: Do not include defs.h or server.h.
* nat/mips-linux-watch.h: Likewise.
* gdb-dlfcn.h: Do not include defs.h.
* tracefile.h: Likewise.
gdb/gdbserver/
2014-07-31 Gary Benson <gbenson@redhat.com>
* ax.h: Do not include server.h.
* gdbthread.h: Likewise.
* lynx-low.h: Likewise.
* notif.h: Likewise.
This makes target_ops::to_open take a const string and then fixes the
fallout.
There were a few of these I could not build. However I eyeballed it
and in any case the fixes should generally be trivial.
This is based on the patch to fix up the target debugging for to_open,
because that changes gdb to not directly install to_open as the target
command
2014-07-30 Tom Tromey <tromey@redhat.com>
* bsd-kvm.c (bsd_kvm_open): Constify.
* corelow.c (core_open): Constify.
* ctf.c (ctf_open): Constify.
* dbug-rom.c (dbug_open): Constify.
* exec.c (exec_open): Constify.
* m32r-rom.c (m32r_open, mon2000_open): Constify.
* microblaze-rom.c (picobug_open): Constify.
* nto-procfs.c (procfs_open_1, procfs_open, procfs_native_open):
Constify.
* ppcbug-rom.c (ppcbug_open0, ppcbug_open1): Constify.
* record-btrace.c (record_btrace_open): Constify.
* record-full.c (record_full_core_open_1, record_full_open_1)
(record_full_open): Constify.
* remote-m32r-sdi.c (m32r_open): Constify.
* remote-mips.c (common_open, mips_open, pmon_open, ddb_open)
(rockhopper_open, lsi_open): Constify.
* remote-sim.c (gdbsim_open): Constify.
* remote.c (remote_open, extended_remote_open, remote_open_1):
Constify.
* target.h (struct target_ops) <to_open>: Make "arg" const.
* tracefile-tfile.c (tfile_open): Constify.
This constifies a few functions in cli-utils -- get_number_trailer and
friends -- and then fixes the fallout.
2014-07-30 Tom Tromey <tromey@redhat.com>
* breakpoint.c (map_breakpoint_numbers): Update.
* cli/cli-utils.c (get_number_trailer): Make "pp" const. Update.
(get_number_const): New function.
(get_number): Rewrite using get_number_const.
(init_number_or_range): Make "string" const.
(number_is_in_list): Make "list" const.
* cli/cli-utils.h (get_number_const): Declare.
(struct get_number_or_range_state) <string, end_ptr>: Now const.
(init_number_or_range, number_is_in_list): Update.
* printcmd.c (map_display_numbers): Update.
* value.c (value_from_history_ref): Constify.
* value.h (value_from_history_ref): Update.
This constifies exec_file_attach and updates the rest of gdb.
Insight will need some minor tweaks after this, though it's worth
noting that I think all that hook stuff can actually just go away. I
sent a patch to this effect once, but since the Insight source
repository situation isn't currently resolved there wasn't a
convenient way to test it.
2014-07-30 Tom Tromey <tromey@redhat.com>
* corefile.c (hook_type, call_extra_exec_file_hooks)
(specify_exec_file_hook): Constify.
* exec.c (exec_file_attach): Make "filename" const.
* gdbcore.h (deprecated_exec_file_display_hook)
(specify_exec_file_hook, exec_file_attach): Constify.
* main.c (captured_main): Use catch_command_errors_const.
This is a follow-on to the patch to auto-generate target debug methods.
While working on that patch I noticed that the to_open debug setting
will never work. There is no path by which debug_to_open can be
called.
This patch fixes the problem by using a generic function as the
implementation of the various "target" subcommands, and then putting
the debug printing there.
This is also a tiny step toward fixing PR 7250 (and apparently why
command contexts were introduced).
Built and regtested on x86-64 Fedora 20.
2014-07-30 Tom Tromey <tromey@redhat.com>
* target.c (open_target): New function.
(add_target_with_completer, add_deprecated_target_alias): Use
set_cmd_sfunc, set_cmd_context.
(debug_to_open): Remove.
(setup_target_debug): Update.
Hello,
I happen to read the code and find the comments to operator_check are
incorrect. This patch is to fix the comments per my understanding.
The comments and field operator_check was added by this patch
https://sourceware.org/ml/gdb-patches/2010-04/msg00556.html
but the inconsistency between code and comments wasn't pointed out during
the review.
gdb:
2014-07-30 Yao Qi <yao@codesourcery.com>
* parser-defs.h (struct exp_descriptor) <operator_check>: Update
comments.
* parse.c (exp_iterate): Update comments.
This commit creates a new header, common/common-defs.h, to hold
definitions common to all code under gdb/. Both gdb/defs.h and
gdb/gdbserver/server.h are modified to include common-defs.h as
their first non-comment line; all code under gdb/ includes either
defs.h or server.h as appropriate, so common-defs.h will be the
first actual code the compiler sees.
For this initial commit common-defs.h includes only the two
config.h files. Future commits will move more code currently
duplicated across defs.h and server.h such that shared code in
gdb/{common,target,nat} can be modified to include common-defs.h
rather than defs.h or server.h.
gdb/
2014-07-30 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add common/common-defs.h.
* defs.h: Include common-defs.h.
Do not include config.h or build-gnulib/config.h.
gdb/gdbserver/
2014-07-30 Gary Benson <gbenson@redhat.com>
* server.h: Include common-defs.h.
Do not include config.h or build-gnulib-gdbserver/config.h.
All source files under gdb/ that include headers from gdb/ include
either defs.h or server.h before any other code with the exception
of gdb/gdbserver/gdbreplay.c which seems to be a special case. Both
defs.h and server.h include both our and gnulib's config.h files as
their first non-comment line, so no other file ever needs to directly
include any config.h. This commit removes two such direct config.h
includes.
gdb/
2014-07-30 Gary Benson <gbenson@redhat.com>
* common/common-utils.h: Do not include config.h.
* nat/linux-btrace.h: Likewise.
This commit makes all source files under gdb/ that include headers
from gdb/ include either defs.h or server.h before any other code.
This ensures that definitions and macros from the two config.h files
are always in place for our code. An exception has been made for
gdb/gdbserver/gdbreplay.c which seems to be a special case.
gdb/
2014-07-30 Gary Benson <gbenson@redhat.com>
* btrace.c: Include defs.h.
* common/ptid.c: Include defs.h or server.h as appropriate.
* nat/mips-linux-watch.c: Likewise.
gdb/gdbserver/
2014-07-30 Gary Benson <gbenson@redhat.com>
* hostio-errno.c: Move server.h to top of includes list.
* inferiors.c: Likewise.
* linux-x86-low.c: Likewise.
* notif.c: Include server.h.
While working on target_is_pushed, I noticed that it is written in a
strange way. The code currently keeps an extra indirection, where a
simple linked list traversal is all that is needed. It seems likely
this was done by copying and pasting other code. However, there is no
reason to do this and the more obvious code is simpler to reason
about. So, this patch change the implementation.
2014-07-29 Tom Tromey <tromey@redhat.com>
* target.c (target_is_pushed): Simplify.
As reported in PR 17206, an internal error is triggered when command
until is executed. In infcmd.c:until_next_command, step_range_end is
set to 'pc',
if (!func)
{
struct bound_minimal_symbol msymbol = lookup_minimal_symbol_by_pc (pc);
if (msymbol.minsym == NULL)
error (_("Execution is not within a known function."));
tp->control.step_range_start = BMSYMBOL_VALUE_ADDRESS (msymbol);
tp->control.step_range_end = pc;
}
and later in infrun.c:resume, the assert below is triggered in PR
17206.
if (tp->control.may_range_step)
{
/* If we're resuming a thread with the PC out of the step
range, then we're doing some nested/finer run control
operation, like stepping the thread out of the dynamic
linker or the displaced stepping scratch pad. We
shouldn't have allowed a range step then. */
gdb_assert (pc_in_thread_step_range (pc, tp));
}
In until_next_command, we set step range to [XXX, pc), so pc isn't
within the range. pc_in_thread_step_range returns false and the
assert is triggered. AFAICS, the range we want in until_next_command
is [XXX, pc] instead of [XXX, pc), because we want to program step
until greater than pc. This patch is to set step_range_end to
'pc + 1'. Running until-nodebug.exp with unpatched GDB will get the
following fail,
FAIL: gdb.base/until-nodebug.exp: until 2 (GDB internal error)
and the fail goes away when the fix is applied.
gdb:
2014-07-29 Yao Qi <yao@codesourcery.com>
PR gdb/17206
* infcmd.c (until_next_command): Set step_range_end to PC + 1.
gdb/testsuite:
2014-07-29 Yao Qi <yao@codesourcery.com>
PR gdb/17206
* gdb.base/until-nodebug.exp: New.
* guile/scm-param.c (pascm_parameter_defined_p): New function.
(gdbscm_register_parameter_x): Call it. Raise error for pre-existing
parameters.
testsuite/
* gdb.guile/scm-parameter.exp: Add tests for trying to create
previously existing parameter, and previously ambiguously spelled
parameter.
Recent versions of glibc have assembled the signal trampoline code
as Thumb2, which causes gdb to misinterpret them and a number of
testsuite tests to fail. Educate gdb about these trampolines and
get the tests running again.
gdb/ChangeLog:
2014-07-28 Will Newton <will.newton@linaro.org>
* arm-linux-tdep.c (THUMB2_SET_R7_SIGRETURN1): New define.
(THUMB2_SET_R7_SIGRETURN2): Likewise.
(THUMB2_SET_R7_RT_SIGRETURN1): Likewise.
(THUMB2_SET_R7_RT_SIGRETURN2): Likewise.
(THUMB2_EABI_SYSCALL): Likewise.
(thumb2_eabi_linux_sigreturn_tramp_frame): Create new
struct tramp_frame.
(thumb2_eabi_linux_rt_sigreturn_tramp_frame): Likewise.
(arm_linux_init_abi): Add Thumb2 tramp frame unwinders.
These tests used to fail on ARM but now pass, so remove the KFAIL.
gdb/testsuite/ChangeLog:
2014-07-28 Will Newton <will.newton@linaro.org>
* gdb.base/varargs.exp: Remove KFAILs for ARM.
* acinclude.m4 (GDB_GUILE_PROGRAM_NAMES): New macro.
(GDB_GUILD_TARGET_FLAG, GDB_TRY_GUILD): New macros.
* configure.ac: Try to use guild to compile an scm file, if it fails
then disable guile support.
* configure: Regenerate.
* data-directory/Makefile.in (GUILE_SOURCE_FILES): Renamed from
GUILE_FILE_LIST.
(GUILE_COMPILED_FILES): New variable.
(GUILE_FILES) Update.
(GUILD, GUILD_TARGET_FLAG, GUILD_COMPILE_FLAGS): New variables.
(stamp-guile): Compile scm files.
* guile/guile.c (boot_guile_support): New function.
(standard_throw_args_p): New function.
(print_standard_throw_error, print_throw_error): New functions.
(handle_boot_error): New function.
(initialize_scheme_side): Rewrite to call boot_guile_support.
* guile/lib/gdb/boot.scm: Update %load-compiled-path. Load gdb.go.
* guile/lib/gdb/init.scm (%silence-compiler-warnings%): New function.
* data-directory/Makefile.in (GUILE_FILES): Add support.scm.
* guile/lib/gdb/support.scm: New file.
* guile/guile.c (gdbscm_init_module_name): Change to "gdb".
* guile/lib/gdb.scm: Load gdb/init.scm as an include file.
All uses updated.
* guile/lib/gdb/init.scm (SCM_ARG1, SCM_ARG2): Moved to support.scm.
All uses updated.
(%assert-type): Ditto, and renamed to assert-type.
(%exception-print-style): Delete.
testsuite/
* gdb.guile/types-module.exp: Add tests for wrong type arguments.
Tested with/without guile,python on amd64-linux.
I'm not sure we still have to deal with shells that can't
handle empty for lists, but I played it safe.
Otherwise this patch would be a lot smaller (though a diff -b
will still show the real changes).
PR build/17105
* configure.ac: Add AM_CONDITIONALs for HAVE_PYTHON, HAVE_GUILE.
* configure: Regenerate.
* data-directory/Makefile.in (PYTHON_FILE_LIST): Renamed from
PYTHON_FILES.
(PYTHON_FILES): New variable.
(GUILE_FILE_LIST): Renamed from GUILE_FILES.
(GUILE_FILES): New variable.
(stamp-python, install-python, uninstall-python): Handle empty
file list.
(stamp-guile, install-guile, uninstall-guile): Ditto.
PR 17185 describes a problem with using gdb+guile with libgc 7.4.0.
The symptom is a hang in sigsuspend.
[The thread referenced in the PR has the details.]
It's not clear what the right fix is, or even where the bug is yet.
This patch applies the same workaround Guile has applied.
There is no functionality or real performance loss with this,
and Guile has been using it for awhile.
* configure.ac: Add check for header gc/gc.h.
Add check for function setenv.
* configure: Regenerate.
* config.in: Regenerate.
* guile/guile.c (_initialize_guile): Add workaround for libgc 7.4.0.
This fixes gdbarch matching, making sure one for the opposite compressed
ISA variation is not chosen. That in turn makes "set mips compression"
work; right now the setting sticks to the initial value, either inferred
from the ELF header of the binary first loaded or the default value if
no binary has been used. This only affects debugging with no symbol
table available or no binary chosen at all, as otherwise symbol
annotations determine the compressed ISA variation.
* mips-tdep.c (mips_gdbarch_init): Also check the compressed ISA
variation in gdbarch matching.
This removes the using_exec_ops global from exec.c, in favor of
querying the target stack directly using target_is_pushed. This is
more in keeping with other code in gdb, and is also more future-proof
as it is more multi-target-ready.
Built and regtested on x86-64 Fedora 20.
2014-07-25 Tom Tromey <tromey@redhat.com>
* exec.c (using_exec_ops): Remove.
(exec_close_1): Update. Remove extraneous block, reindent.
(add_target_sections): Use target_is_pushed.
A previous patch added a new parameter to clear_proceed_status, but
forgot to update a few callers.
Tested by building on x86_64 Fedora 20, with --enable-targets=all.
gdb/
2014-07-25 Pedro Alves <palves@redhat.com>
* go32-nat.c (go32_create_inferior): Pass 0 to clear_proceed_status.
* monitor.c (monitor_create_inferior): Likewise.
* remote-m32r-sdi.c (m32r_create_inferior): Likewise.
* remote-sim.c (gdbsim_create_inferior): Likewise.
* solib-irix.c (irix_solib_create_inferior_hook): Likewise.
* solib-osf.c (osf_solib_create_inferior_hook): Likewise.
* windows-nat.c (do_initial_windows_stuff): Likewise.
Currently, GDB can pass a signal to the wrong thread in several
different but related scenarios.
E.g., if thread 1 stops for signal SIGFOO, the user switches to thread
2, and then issues "continue", SIGFOO is actually delivered to thread
2, not thread 1. This obviously messes up programs that use
pthread_kill to send signals to specific threads.
This has been a known issue for a long while. Back in 2008 when I
made stop_signal be per-thread (2020b7ab), I kept the behavior -- see
code in 'proceed' being removed -- wanting to come back to it later.
The time has finally come now.
The patch fixes this -- on resumption, intercepted signals are always
delivered to the thread that had intercepted them.
Another example: if thread 1 stops for a breakpoint, the user switches
to thread 2, and then issues "signal SIGFOO", SIGFOO is actually
delivered to thread 1, not thread 2, because 'proceed' first switches
to thread 1 to step over its breakpoint... If the user deletes the
breakpoint before issuing "signal FOO", then the signal is delivered
to thread 2 (the current thread).
"signal SIGFOO" can be used for two things: inject a signal in the
program while the program/thread had stopped for none, bypassing
"handle nopass"; or changing/suppressing a signal the program had
stopped for. These scenarios are really two faces of the same coin,
and GDB can't really guess what the user is trying to do. GDB might
have intercepted signals in more than one thread even (see the new
signal-command-multiple-signals-pending.exp test). At least in the
inject case, it's obviously clear to me that the user means to deliver
the signal to the currently selected thread, so best is to make the
command's behavior consistent and easy to explain.
Then, if the user is trying to suppress/change a signal the program
had stopped for instead of injecting a new signal, but, the user had
changed threads meanwhile, then she will be surprised that with:
(gdb) continue
Thread 1 stopped for signal SIGFOO.
(gdb) thread 2
(gdb) signal SIGBAR
... GDB actually delivers SIGFOO to thread 1, and SIGBAR to thread 2
(with scheduler-locking off, which is the default, because then
"signal" or any other resumption command resumes all threads).
So the patch makes GDB detect that, and ask for confirmation:
(gdb) thread 1
[Switching to thread 1 (Thread 10979)]
(gdb) signal SIGUSR2
Note:
Thread 3 previously stopped with signal SIGUSR2, User defined signal 2.
Thread 2 previously stopped with signal SIGUSR1, User defined signal 1.
Continuing thread 1 (the current thread) with specified signal will
still deliver the signals noted above to their respective threads.
Continue anyway? (y or n)
All these scenarios are covered by the new tests.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-07-25 Pedro Alves <palves@redhat.com>
* NEWS: Mention signal passing and "signal" command changes.
* gdbthread.h (struct thread_suspend_state) <stop_signal>: Extend
comment.
* breakpoint.c (until_break_command): Adjust clear_proceed_status
call.
* infcall.c (run_inferior_call): Adjust clear_proceed_status call.
* infcmd.c (proceed_thread_callback, continue_1, step_once)
(jump_command): Adjust clear_proceed_status call.
(signal_command): Warn if other thread that are resumed have
signals that will be delivered. Adjust clear_proceed_status call.
(until_next_command, finish_command)
(proceed_after_attach_callback, attach_command_post_wait)
(attach_command): Adjust clear_proceed_status call.
* infrun.c (proceed_after_vfork_done): Likewise.
(proceed_after_attach_callback): Adjust comment.
(clear_proceed_status_thread): Clear stop_signal if not in pass
state.
(clear_proceed_status_callback): Delete.
(clear_proceed_status): New 'step' parameter. Only clear the
proceed status of threads the command being prepared is about to
resume.
(proceed): If passed in an explicit signal, override stop_signal
with it. Don't pass the last stop signal to the thread we're
resuming.
(init_wait_for_inferior): Adjust clear_proceed_status call.
(switch_back_to_stepped_thread): Clear the signal if it should not
be passed.
* infrun.h (clear_proceed_status): New 'step' parameter.
(user_visible_resume_ptid): Add comment.
* linux-nat.c (linux_nat_resume_callback): Don't check whether the
signal is in pass state.
* remote.c (append_pending_thread_resumptions): Likewise.
* mi/mi-main.c (proceed_thread): Adjust clear_proceed_status call.
gdb/doc/
2014-07-25 Pedro Alves <palves@redhat.com>
Eli Zaretskii <eliz@gnu.org>
* gdb.texinfo (Signaling) <signal command>: Explain what happens
with multi-threaded programs.
gdb/testsuite/
2014-07-25 Pedro Alves <palves@redhat.com>
* gdb.threads/signal-command-handle-nopass.c: New file.
* gdb.threads/signal-command-handle-nopass.exp: New file.
* gdb.threads/signal-command-multiple-signals-pending.c: New file.
* gdb.threads/signal-command-multiple-signals-pending.exp: New file.
* gdb.threads/signal-delivered-right-thread.c: New file.
* gdb.threads/signal-delivered-right-thread.exp: New file.
I happened to notice that a couple of macros in target.h weren't
properly using parens and as a result had a strange definition.
This patch adds the parens and then fixes the macros to be written as
must have been intended.
Tested by rebuilding.
I'm pushing this as obvious.
2014-07-25 Tom Tromey <tromey@redhat.com>
* target.h (target_stopped_data_address)
(target_watchpoint_addr_within_range): Use "->", not ".". Fix
parentheses.
This patch adds additional comments about the conversion of addresses to
pointers and vice-versa on AVR.
Special conversion needs to be done when dealing with an address in the
flash address space, where both code and read-only data can be stored.
Code and data pointers to flash are not addressed the same way:
A code pointer is 16 bit addressed. A data pointer is 8 bit addressed,
even if the data is in flash.
2014-07-25 Pierre Langlois <pierre.langlois@embecosm.com>
* avr-tdep.c (avr_address_to_pointer): Clarify the conversion in the
comments.
(avr_pointer_to_address): Likewise.
Jan pointed out in
<https://sourceware.org/ml/gdb-patches/2014-07/msg00553.html> that
these testcases have racy results:
gdb.base/double-prompt-target-event-error.exp
gdb.base/paginate-after-ctrl-c-running.exp
gdb.base/paginate-bg-execution.exp
gdb.base/paginate-execution-startup.exp
gdb.base/paginate-inferior-exit.exp
This is easily reproducible with "read1" from:
[reproducer for races of expect incomplete reads]
http://sourceware.org/bugzilla/show_bug.cgi?id=12649
The '-notransfer -re "<return>" { exp_continue }' trick in the current
tests doesn't actually work.
The issue that led to the -notransfer trick was that
"---Type <return> to continue, or q <return> to quit---"
has two "<return>"s. If one wants gdb_test_multiple to not hit the
built-in "<return>" match that results in FAIL, one has to expect the
pagination prompt in chunks, first up to the first "<return>", then
again, up to the second. Something around these lines:
gdb_test_multiple "" $test {
-re "<return>" {
exp_continue
}
-re "to quit ---" {
pass $test
}
}
The intent was for -notransfer+exp_continue to make expect fetch more
input, and rerun the matches against the now potentially fuller
buffer, and then eventually the -re that includes the full pagination
prompt regex would match instead (because it's listed higher up, it
would match first). But, once that "<return>" -notransfer -re
matches, it keeps re-matching forever. It seems like with
exp_continue, expect immediately retries matching, instead of first
reading in more data into the buffer, if available.
Fix this like I should have done in the first place. There's actually
no good reason for gdb_test_multiple to only match "<return>". We can
make gdb_test_multiple expect the whole pagination prompt text
instead, which is store in the 'pagination_prompt' global (similar to
'gdb_prompt'). Then a gdb_test_multiple caller that doesn't want the
default match to trigger, because it wants to see one pagination
prompt, does simply:
gdb_test_multiple "" $test {
-re "$pagination_prompt$" {
pass $test
}
}
which is just like when we don't want the default $gdb_prompt match
within gdb_test_multiple to trigger, like:
gdb_test_multiple "" $test {
-re "$gdb_prompt $" {
pass $test
}
}
Tested on x86_64 Fedora 20. In addition, I've let the racy tests run
all in parallel in a loop for 30 minutes, and they never failed.
gdb/testsuite/
2014-07-25 Pedro Alves <palves@redhat.com>
* gdb.base/double-prompt-target-event-error.exp
(cancel_pagination_in_target_event): Remove '-notransfer <return>'
match.
(cancel_pagination_in_target_event): Rework double prompt
detection.
* gdb.base/paginate-after-ctrl-c-running.exp
(test_ctrlc_while_target_running_paginates): Remove '-notransfer
<return>' match.
* gdb.base/paginate-bg-execution.exp
(test_bg_execution_pagination_return)
(test_bg_execution_pagination_cancel): Remove '-notransfer
<return>' matches.
* gdb.base/paginate-execution-startup.exp
(test_fg_execution_pagination_return)
(test_fg_execution_pagination_cancel): Remove '-notransfer
<return>' matches.
* gdb.base/paginate-inferior-exit.exp
(test_paginate_inferior_exited): Remove '-notransfer <return>'
match.
* lib/gdb-utils.exp (string_to_regexp): Move here from lib/gdb.exp.
* lib/gdb.exp (pagination_prompt): Run text through
string_to_regexp.
(gdb_test_multiple): Match $pagination_prompt instead of
"<return>".
(string_to_regexp): Move to lib/gdb-utils.exp.
This constifies deprecate_cmd and the "replacement" field in struct
cmd_list_element.
2014-07-24 Tom Tromey <tromey@redhat.com>
* cli/cli-decode.c (deprecate_cmd): Make "replacement" const.
* cli/cli-decode.h (struct cmd_list_element) <replacement>: Now
const.
* command.h (deprecate_cmd): Update.
* maint.c (maintenance_do_deprecate): Add casts.
This constifies a couple of functions in stack.c.
2014-07-24 Tom Tromey <tromey@redhat.com>
* stack.c (up_silently_base, down_silently_base): Make argument
const.
This constifies the "pattern" argument to solib_add.
2014-07-24 Tom Tromey <tromey@redhat.com>
* solib.c (solib_add): Make "pattern" const.
* solib.h (solib_add): Update.
This does some more constification in remote.c.
2014-07-24 Tom Tromey <tromey@redhat.com>
* remote.c (remote_serial_open, print_packet, putpkt)
(putpkt_binary): Constify.
* remote.h (putpkt): Update.
This constifies an argument to monitor_open.
2014-07-24 Tom Tromey <tromey@redhat.com>
* monitor.c (monitor_open): Make "args" const.
* monitor.h (monitor_open): Update.
This does a bit of constification in maint.c, making
print_bfd_section_info a bit cleaner in the process.
2014-07-24 Tom Tromey <tromey@redhat.com>
* maint.c (match_bfd_flags): Make "string" const.
(print_bfd_section_info): Remove casts.
(print_objfile_section_info): Make "string" const.
This constifies an argument to inf_child_open_target.
2014-07-24 Tom Tromey <tromey@redhat.com>
* inf-child.c (inf_child_open_target): Make "arg" const.
* inf-child.h (inf_child_open_target): Update.
This constifies an argument to unset_in_environ.
2014-07-24 Tom Tromey <tromey@redhat.com>
* environ.c (unset_in_environ): Make "var" const.
* environ.h (unset_in_environ): Update.
This does some minor constification in cli-dump.c.
2014-07-24 Tom Tromey <tromey@redhat.com>
* cli/cli-dump.c (scan_expression_with_cleanup): Return const.
Make "cmd" const.
(scan_filename_with_cleanup): Likewise.
(dump_memory_to_file, dump_value_to_file, restore_binary_file):
Make arguments const.
(restore_command): Update.
The TUI currently crashes when the user types <return> in response to
a pagination prompt:
$ gdb --tui ...
*the TUI is now active*
(gdb) set height 2
(gdb) help
List of classes of commands:
Program received signal SIGSEGV, Segmentation fault.
strlen () at ../sysdeps/x86_64/strlen.S:106
106 movdqu (%rax), %xmm12
(top-gdb) bt
#0 strlen () at ../sysdeps/x86_64/strlen.S:106
#1 0x000000000086be5f in xstrdup (s=0x0) at ../src/libiberty/xstrdup.c:33
#2 0x00000000005163f9 in tui_prep_terminal (notused1=1) at ../src/gdb/tui/tui-io.c:296
#3 0x000000000077a7ee in _rl_callback_newline () at ../src/readline/callback.c:82
#4 0x000000000077a853 in rl_callback_handler_install (prompt=0x0, linefunc=0x618b60 <command_line_handler>) at ../src/readline/callback.c:102
#5 0x0000000000718a5c in gdb_readline_wrapper_cleanup (arg=0xfd14d0) at ../src/gdb/top.c:788
#6 0x0000000000596d08 in do_my_cleanups (pmy_chain=0xcf0b38 <cleanup_chain>, old_chain=0x1043d10) at ../src/gdb/cleanups.c:155
#7 0x0000000000596d75 in do_cleanups (old_chain=0x1043d10) at ../src/gdb/cleanups.c:177
#8 0x0000000000718bd9 in gdb_readline_wrapper (prompt=0x7fffffffcfa0 "---Type <return> to continue, or q <return> to quit---")
at ../src/gdb/top.c:835
#9 0x000000000071cf74 in prompt_for_continue () at ../src/gdb/utils.c:1894
#10 0x000000000071d434 in fputs_maybe_filtered (linebuffer=0x1043db0 "List of classes of commands:\n\n", stream=0xf72e20, filter=1)
at ../src/gdb/utils.c:2111
#11 0x000000000071da0f in vfprintf_maybe_filtered (stream=0xf72e20, format=0x89aef8 "List of classes of %scommands:\n\n", args=0x7fffffffd118, filter=1)
at ../src/gdb/utils.c:2339
#12 0x000000000071da4a in vfprintf_filtered (stream=0xf72e20, format=0x89aef8 "List of classes of %scommands:\n\n", args=0x7fffffffd118)
at ../src/gdb/utils.c:2347
#13 0x000000000071dc72 in fprintf_filtered (stream=0xf72e20, format=0x89aef8 "List of classes of %scommands:\n\n") at ../src/gdb/utils.c:2399
#14 0x00000000004f90ab in help_list (list=0xe6d100, cmdtype=0x89ad8c "", class=all_classes, stream=0xf72e20)
at ../src/gdb/cli/cli-decode.c:1038
#15 0x00000000004f8dba in help_cmd (arg=0x0, stream=0xf72e20) at ../src/gdb/cli/cli-decode.c:946
Git 0017922 added:
@@ -776,6 +777,12 @@ gdb_readline_wrapper_cleanup (void *arg)
gdb_assert (input_handler == gdb_readline_wrapper_line);
input_handler = cleanup->handler_orig;
+
+ /* Reinstall INPUT_HANDLER in readline, without displaying a
+ prompt. */
+ if (async_command_editing_p)
+ rl_callback_handler_install (NULL, input_handler);
and tui_prep_terminal simply misses handling the case of a NULL
rl_prompt.
I also checked that readline's sources do similar checks.
gdb/
2014-07-24 Pedro Alves <palves@redhat.com>
* tui/tui-io.c (tui_prep_terminal): Handle NULL rl_prompt.
This patch removes some GDBSERVER checks from nat/linux-ptrace.c.
Currently the code uses a compile-time check to decide whether some
flags should be used. This changes the code to instead let users of
the module specify an additional set of flags; and then changes gdb's
linux-nat.c to call this function. At some later date, when the back
ends are fully merged, we will be able to remove this function again.
gdb/
2014-07-24 Tom Tromey <tromey@redhat.com>
Gary Benson <gbenson@redhat.com>
* nat/linux-ptrace.c (additional_flags): New global.
(linux_test_for_tracesysgood, linux_test_for_tracefork): Use
additional_flags; don't check GDBSERVER.
(linux_ptrace_set_additional_flags): New function.
* nat/linux-ptrace.h (linux_ptrace_set_additional_flags):
Declare.
* linux-nat.c (_initialize_linux_nat): Call
linux_ptrace_set_additional_flags.
gdbserver defines CORE_ADDR to be signed. This seems erroneous to
me; and furthermore likely to cause problems in common/, as it is
different from gdb's definition.
gdb/gdbserver/
2014-07-24 Tom Tromey <tromey@redhat.com>
Gary Benson <gbenson@redhat.com>
* server.h (CORE_ADDR): Now unsigned.
The target debug methods are inconsistently maintained. Most to_*
methods have some kind of targetdebug awareness, but not all of them
do. The ones that do vary in the quantity and quality of output they
generate.
This patch changes most of the target debug methods to be
automatically generated. All the arguments are printed, and separate
lines are printed for entering and existing the outermost call to the
target stack.
For example now you'd see:
-> multi-thread->to_terminal_ours (...)
-> multi-thread->to_is_async_p (...)
<- multi-thread->to_is_async_p (0x1ebb580) = 1
<- multi-thread->to_terminal_ours (0x1ebb580)
-> multi-thread->to_thread_address_space (...)
<- multi-thread->to_thread_address_space (0x1ebb580, 26802) = 1
In this case you can see nested calls. The "multi-thread" on the left
hand side is the topmost target's shortname.
There are some oddities with this patch. I'm on the fence about it
all, I really just wrote it on a whim.
It's not simple to convert every possible method, since a few don't
participate in target delegation.
Printing is done by type, so I introduced some new
debug-printing-specific typedefs to handle cases where it is nicer to
do something else.
On the plus side, this lays the groundwork for making targetdebug
affect every layer of the target stack. The idea would be to wrap
each target_ops in the stack with its own debug_target, and then you
could see calls propagate down the stack and back up; I suppose with
indentation to make it prettier. (That said there are some gotchas
lurking in this idea due to target stack introspection.)
Regtested on x86-64 Fedora 20.
2014-07-24 Tom Tromey <tromey@redhat.com>
* make-target-delegates (munge_type, write_debugmethod): New
functions.
(debug_names): New global.
($TARGET_DEBUG_PRINTER): New global.
(write_function_header): Strip TARGET_DEBUG_PRINTER from the type
name.
Write debug methods. Generate init_debug_target.
* target-debug.h: New file.
* target-delegates.c: Rebuild.
* target.c: Include target-debug.h.
(debug_target): Hoist definition.
(target_kill, target_get_section_table, target_memory_map)
(target_flash_erase, target_flash_done, target_detach)
(target_disconnect, target_wait, target_resume)
(target_pass_signals, target_program_signals, target_follow_fork)
(target_mourn_inferior, target_search_memory)
(target_thread_address_space, target_close)
(target_find_new_threads, target_core_of_thread)
(target_verify_memory, target_insert_mask_watchpoint)
(target_remove_mask_watchpoint): Remove targetdebug code.
(debug_to_post_attach, debug_to_prepare_to_store)
(debug_to_files_info, debug_to_insert_breakpoint)
(debug_to_remove_breakpoint, debug_to_can_use_hw_breakpoint)
(debug_to_region_ok_for_hw_watchpoint)
(debug_to_can_accel_watchpoint_condition)
(debug_to_stopped_by_watchpoint, debug_to_stopped_data_address)
(debug_to_watchpoint_addr_within_range)
(debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint)
(debug_to_insert_watchpoint, debug_to_remove_watchpoint)
(debug_to_terminal_init, debug_to_terminal_inferior)
(debug_to_terminal_ours_for_output, debug_to_terminal_ours)
(debug_to_terminal_save_ours, debug_to_terminal_info)
(debug_to_load, debug_to_post_startup_inferior)
(debug_to_insert_fork_catchpoint)
(debug_to_remove_fork_catchpoint)
(debug_to_insert_vfork_catchpoint)
(debug_to_remove_vfork_catchpoint)
(debug_to_insert_exec_catchpoint)
(debug_to_remove_exec_catchpoint, debug_to_has_exited)
(debug_to_can_run, debug_to_thread_architecture, debug_to_stop)
(debug_to_rcmd, debug_to_pid_to_exec_file): Remove.
(setup_target_debug): Call init_debug_target.
* target.h (TARGET_DEBUG_PRINTER): New macro.
(struct target_ops) <to_resume, to_wait, to_pass_signals,
to_program_signals>: Use TARGET_DEBUG_PRINTER.
GDB and gdbserver have functions named "fatal" that are used in
completely different ways. In gdbserver "fatal" is used to handle
critical errors: it differs from "error" in that "fatal" causes
gdbserver to exit whereas "error" does not. In GDB "fatal" is used
to abort the current operation and return to the command level.
This is implemented by throwing a non-error "RETURN_QUIT" exception.
This commit removes GDB's "fatal" and "vfatal" functions entirely.
The exception-throwing function "throw_vfatal" is renamed as
"throw_vquit", and a new convenience function "throw_quit" is added.
The small number of calls to "fatal" are replaced with calls to
"throw_quit", making what is happening more obvious.
This commit also modifies GDB's "throw_error" to call "throw_verror"
rather than calling "throw_it" directly. This change means the
assignment of RETURN_ERROR as the exception type now happens in
precisely one place in GDB rather than two.
gdb/
2014-07-24 Gary Benson <gbenson@redhat.com>
* exceptions.h (throw_vfatal): Renamed to...
(throw_vquit): New declaration.
(throw_quit): Likewise.
* exceptions.c (throw_vfatal): Renamed to...
(throw_vquit): New function.
(throw_quit): Likewise.
(throw_error): Call throw_verror rather than throw_it.
* utils.h (vfatal): Removed.
(fatal): Likewise.
* utils.c (vfatal): Removed.
(fatal): Likewise.
(internal_verror): Replaced call to fatal with call to throw_quit.
(quit): Replaced calls to fatal with calls to throw_quit.
microblaze_fetch instruction in order to use cache memory accesses
requested in target_read_code.
ChangeLog:
2014-06-17 Ajit Agarwal <ajitkum@xilinx.com>
* microblaze-tdep.c (microblaze_fetch_instruction): Use of
target_read_code.
also check whether less than zero -- for 'reg' is type 'int', and sizeof
(dwarf2_to_reg_map) is less than 0x7fff.
It is quoted in gdb_assert(), so need check 'reg' whether less than zero.
And the related warning (with '-W'):
../../binutils-gdb/gdb/microblaze-tdep.c:667:3: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare]
ChangeLog:
* microblaze-tdep.c (microblaze_dwarf2_reg_to_regnum): Check whether
less tha zero in conditional expression.
This patch rewrites the make-target-delegates matching code a little
bit. The result is functionally the same (the output has some small
whitespace differences), but the new code is more forgiving regarding
the formatting of target.h. In particular now there's no need to
ensure that the return type and the method name appear on the same
line.
2014-07-23 Tom Tromey <tromey@redhat.com>
* make-target-delegates ($ARGS_PART): Match trailing close paren.
($INTRO_PART): Don't match whitespace.
($METHOD_TRAILER): Move earlier. Remove trailing semicolon and
argument matching.
($METHOD): Add $METHOD_TRAILER.
(trim): Rewrite.
(scan_target_h): New sub.
Change main loop not to collect state.
* target-delegates.c: Rebuild.
This commit fixes the build on systems without sigaltstack.
gdb/
2014-07-23 Gary Benson <gbenson@redhat.com>
* cp-support.c (gdb_demangle): Fix build on systems without
sigaltstack.
I cannot reproduce any wrong case having the code removed.
I just do not find it correct to have it disabled. But at the same time I do
like much / I do not find correct the code myself. It is a bit problematic to
have struct value describing a memory content which is no longer present
there.
What happens there:
------------------------------------------------------------------------------
volatile int vv;
static __attribute__((noinline)) int
bar (int &ref) {
ref = 20;
vv++; /* break-here */
return ref;
}
int main (void) {
int var = 10;
return bar (var);
}
------------------------------------------------------------------------------
<4><c7>: Abbrev Number: 13 (DW_TAG_GNU_call_site_parameter)
<c8> DW_AT_location : 1 byte block: 55 (DW_OP_reg5 (rdi))
<ca> DW_AT_GNU_call_site_value: 2 byte block: 91 74 (DW_OP_fbreg: -12)
<cd> DW_AT_GNU_call_site_data_value: 1 byte block: 3a (DW_OP_lit10)
------------------------------------------------------------------------------
gdb -ex 'b value_addr' -ex r --args ../gdb ./1 -ex 'watch vv' -ex r -ex 'p &ref@entry'
->
6 return ref;
bar (ref=@0x7fffffffd944: 20, ref@entry=@0x7fffffffd944: 10) at 1.C:25
------------------------------------------------------------------------------
At /* break-here */ struct value variable 'ref' is TYPE_CODE_REF.
With FSF GDB HEAD:
(gdb) x/gx arg1.contents
0x6004000a4ad0: 0x00007fffffffd944
(gdb) p ((struct value *)arg1.location.computed.closure).lval
$1 = lval_memory
(gdb) p/x ((struct value *)arg1.location.computed.closure).location.address
$3 = 0x7fffffffd944
With your #if0-ed code:
(gdb) x/gx arg1.contents
0x6004000a4ad0: 0x00007fffffffd944
(gdb) p ((struct value *)arg1.location.computed.closure).lval
$8 = not_lval
(gdb) p/x ((struct value *)arg1.location.computed.closure).location.address
$9 = 0x0
I do not see how to access
((struct value *)arg1.location.computed.closure).location.address
from GDB CLI. Trying
(gdb) p &ref@entry
will invoke value_addr()'s:
if (TYPE_CODE (type) == TYPE_CODE_REF)
/* Copy the value, but change the type from (T&) to (T*). We
keep the same location information, which is efficient, and
allows &(&X) to get the location containing the reference. */
and therefore the address gets fetched already from
arg1.contents
and not from
((struct value *)arg1.location.computed.closure).location.address
.
And for any other type than TYPE_CODE_REF this code you removed does not get
executed at all. This DW_AT_GNU_call_site_data_value DWARF was meant
primarily for Fortran but with -O0 entry values do not get produced
and with -Og and higher Fortran always optimizes out the passing by reference.
If you do not like the removed code there I am OK with removing it as I do not
know how to make it's use reproducible for user anyway. In the worst case
- if there really is some way how to exploit it - one should just get
Attempt to take address of value not located in memory.
instead of some wrong value and it may be easy to fix then.
gdb/
2014-07-22 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf2loc.c (value_of_dwarf_reg_entry): Remove setting value address
for reference entry value target data value.
Message-ID: <20140720150727.GA18488@host2.jankratochvil.net>
The tests at
<https://sourceware.org/ml/gdb-patches/2014-07/msg00277.html> show
that comparing a fully optimized out value's contents with a value
that has not been optimized out, or is partially optimized out crashes
GDB:
(gdb) bt
#0 __memcmp_sse4_1 () at ../sysdeps/x86_64/multiarch/memcmp-sse4.S:816
#1 0x00000000005a1914 in memcmp_with_bit_offsets (ptr1=0x202b2f0 "\n", offset1_bits=0, ptr2=0x0, offset2_bits=0, length_bits=32)
at /home/pedro/gdb/mygit/build/../src/gdb/value.c:678
#2 0x00000000005a1a05 in value_available_contents_bits_eq (val1=0x2361ad0, offset1=0, val2=0x23683b0, offset2=0, length=32)
at /home/pedro/gdb/mygit/build/../src/gdb/value.c:717
#3 0x00000000005a1c09 in value_available_contents_eq (val1=0x2361ad0, offset1=0, val2=0x23683b0, offset2=0, length=4)
at /home/pedro/gdb/mygit/build/../src/gdb/value.c:769
#4 0x00000000006033ed in read_frame_arg (sym=0x1b78d20, frame=0x19bca50, argp=0x7fff4aba82b0, entryargp=0x7fff4aba82d0)
at /home/pedro/gdb/mygit/build/../src/gdb/stack.c:416
#5 0x0000000000603abb in print_frame_args (func=0x1b78cb0, frame=0x19bca50, num=-1, stream=0x1aea450) at /home/pedro/gdb/mygit/build/../src/gdb/stack.c:671
#6 0x0000000000604ae8 in print_frame (frame=0x19bca50, print_level=0, print_what=SRC_AND_LOC, print_args=1, sal=...)
at /home/pedro/gdb/mygit/build/../src/gdb/stack.c:1205
#7 0x0000000000604050 in print_frame_info (frame=0x19bca50, print_level=0, print_what=SRC_AND_LOC, print_args=1, set_current_sal=1)
at /home/pedro/gdb/mygit/build/../src/gdb/stack.c:857
#8 0x00000000006029b3 in print_stack_frame (frame=0x19bca50, print_level=0, print_what=SRC_AND_LOC, set_current_sal=1)
at /home/pedro/gdb/mygit/build/../src/gdb/stack.c:169
#9 0x00000000005fc4b8 in print_stop_event (ws=0x7fff4aba8790) at /home/pedro/gdb/mygit/build/../src/gdb/infrun.c:6068
#10 0x00000000005fc830 in normal_stop () at /home/pedro/gdb/mygit/build/../src/gdb/infrun.c:6214
The 'ptr2=0x0' in frame #1 is val2->contents, and since git 4f14910f:
gdb/ChangeLog
2013-11-26 Andrew Burgess <aburgess@broadcom.com>
* value.c (allocate_optimized_out_value): Mark value as non-lazy.
... a fully optimized-out value can have it's value contents buffer
NULL.
As a spotgap fix, revert 4f14910f, with a comment. A full fix would
be too invasive for 7.8.
gdb/
2014-07-22 Pedro Alves <palves@redhat.com>
* value.c (allocate_optimized_out_value): Don't mark value as
non-lazy.
TERNOP_SLICE was added for language Chill, but it is used for Ada and D later.
Since language Chill was removed from GDB, TERNOP_SLICE is only used for
Ada and D. This patch is to update its comments.
gdb:
2014-07-20 Yao Qi <yao@codesourcery.com>
* std-operator.def: Update comments to TERNOP_SLICE.
BINOP_RANGE was added by the following commit for chill language.
commit badefd2800
Author: Per Bothner <per@bothner.com>
Date: Wed Nov 29 22:59:31 1995 +0000
* expression.h (enum exp_opcode): Add BINOP_RANGE.
* expprint.c (dump_expression): Support BINOP_RANGE.
* eval.c (evaluate_subexp_standard): Handle BINOP_RANGE (as error).
(case MULTI_SUBSCRIPT): Fix broken f77 value->int ad hoc conversion.
* ch-lang.c (chill_op_print_tab): Support BINOP_RANGE.
(evaluate_subexp_chill): Error on BINOP_COMMA.
Chill language is no longer supported, so we can remove BINOP_RANGE too.
This patch is to remove BINOP_RANGE.
gdb:
2014-07-20 Yao Qi <yao@codesourcery.com>
* std-operator.def: Remove BINOP_RANGE.
* breakpoint.c (watchpoint_exp_is_const): Update.
* expprint.c (dump_subexp_body_standard): Likewise.
* eval.c (init_array_element): Remove dead code.
(evaluate_subexp_standard): Likewise.
Chill language support was removed several years ago, and BINOP_IN
isn't used for Pascal. This patch is to remove BINOP_IN.
gdb:
2014-07-20 Yao Qi <yao@codesourcery.com>
* std-operator.def: Remove BINOP_IN.
* breakpoint.c (watchpoint_exp_is_const): Update.
* eval.c (evaluate_subexp_standard): Likewise.
* expprint.c (dump_subexp_body_standard): Likewise.
Prior to version MicroBlaze v8.10.a,EDK 13.1, XMD's gdbserver stub returned 57
registers in response to GDB's G request. Starting with version MicroBlaze
v8.10.a, EDK 13.1, XMD added the slr and shr register, for a count of 59
registers. This patch adds these registers to the expected G response. This patch
fixes the above problem for baremetal and also supports the backward compatibility.
ChangeLog:
2014-07-02 Ajit Agarwal <ajitkum@xilinx.com>
* microblaze-tdep.c (microblaze_register_names): Add
the rshr and rslr register names.
(microblaze_gdbarch_init): Use of tdesc_has_registers.
Use of tdesc_find_feature. Use of tdesc_data_alloc.
Use of tdesc_numbered_register. Use of
microblaze_register_g_packet_guesses. Use of
tdesc_use_registers. Use of set_gdbarch_register_type.
(microblaze_register_g_packet_guesses): New.
* microblaze-tdep.h (microblaze_reg_num): Add
field MICROBLAZE_SLR_REGNUM MICROBLAZE_SHR_REGNUM
MICROBLAZE_NUM_REGS and MICROBLAZE_NUM_CORE_REGS.
(microblaze_frame_cache): Use of MICROBLAZE_NUM_REGS.
* features/microblaze-core.xml: New file.
* features/microblaze-stack-protect.xml: New file.
* features/microblaze-with-stack-protect.c: New file.
* features/microblaze-with-stack-protect.xml: New file.
* features/microblaze.xml: New file.
* features/microblaze.c: New file.
* features/Makefile (microblaze-with-stack-protect): Add
microblaze-with-stack-protect microblaze and
microblaze-expedite.
* regformats/microblaze-with-stack-protect.dat: New file.
* regformats/microblaze.dat: New file.
* doc/gdb.texinfo (MicroBlaze Features): New.
Signed-off-by:Ajit Agarwal ajitkum@xilinx.com
While working on some target stack changes, I noticed that exec_ops is
only used from exec.c. This patch makes it "static". This is cleaner
and makes it simpler to reason about the use of the target.
Tested by rebuilding.
I'm checking this in as obvious.
2014-07-18 Tom Tromey <tromey@redhat.com>
* exec.c (exec_ops): Now static.
* exec.h (exec_ops): Don't declare.
A long time ago Pedro pointed out that there are some calls to
find_target_beneath that pass in an explicit target_ops; but which
should instead use the ops provided to the method in question. See:
https://sourceware.org/ml/gdb-patches/2014-01/msg00429.html
This patch is just a minor cleanup to fix all such calls. There were
only three.
2014-07-18 Tom Tromey <tromey@redhat.com>
* spu-multiarch.c (spu_region_ok_for_hw_watchpoint): Pass "self"
to find_target_beneath.
* ravenscar-thread.c (ravenscar_prepare_to_store): Pass "ops" to
find_target_beneath.
(ravenscar_mourn_inferior): Pass "self" to find_target_beneath.
This fixes PR gdb/17130.
The bug is that some code in utils.c was not updated during the target
delegation change:
if (job_control
/* If there is no terminal switching for this target, then we can't
possibly get screwed by the lack of job control. */
|| current_target.to_terminal_ours == NULL)
fatal ("Quit");
else
fatal ("Quit (expect signal SIGINT when the program is resumed)");
After the delegation change, to_terminal_ours will never be NULL.
I think this bug can be seen before the target delegation change by
enabling target debugging -- this would also cause to_terminal_ours to
be non-NULL.
The fix is to introduce a new target_supports_terminal_ours function,
that properly checks the target stack. This is not perhaps ideal, but
I think is a reasonable-enough approach, and in keeping with some
other existing code of the same form.
This patch also fixes a similar bug in target_supports_delete_record.
2014-07-18 Tom Tromey <tromey@redhat.com>
PR gdb/17130:
* utils.c (quit): Use target_supports_terminal_ours.
* target.h (target_supports_terminal_ours): Declare.
* target.c (target_supports_delete_record): Don't check
to_delete_record against NULL.
(target_supports_terminal_ours): New function.
This patch cleans up some minor inconsistencies in target delegation.
It's primary purpose is to avoid confusion in the code. A few spots
were checking the "beneath" target; however this can only be NULL for
the dummy target, so such tests are not needed. Some other spots were
iterating over the beneath targets, looking for a method
implementation. This is not needed for methods handled by
make-target-delegates, as there is always an implementation.
2014-07-18 Tom Tromey <tromey@redhat.com>
PR gdb/17130:
* spu-multiarch.c (spu_region_ok_for_hw_watchpoint)
(spu_fetch_registers, spu_store_registers, spu_xfer_partial)
(spu_search_memory, spu_mourn_inferior): Simplify delegation.
* linux-thread-db.c (thread_db_pid_to_str): Always delegate.
* windows-nat.c (windows_xfer_partial): Always delegate.
* record-btrace.c (record_btrace_xfer_partial): Simplify
delegation.
(record_btrace_fetch_registers, record_btrace_store_registers)
(record_btrace_prepare_to_store, record_btrace_resume)
(record_btrace_wait, record_btrace_find_new_threads)
(record_btrace_thread_alive): Likewise.
* procfs.c (procfs_xfer_partial): Always delegate.
* corelow.c (core_xfer_partial): Always delegate.
* sol-thread.c (sol_find_new_threads): Simplify delegation.
This patch moves exec_make_note_section a bit earlier in exec.c. This
lets us remove an otherwise unnecessary forward declaration and it
also makes the file a bit more in line with other code, as now
_initialize_exec is the final function in the file.
Tested by rebuilding.
I'm committing this as obvious.
2014-07-18 Tom Tromey <tromey@redhat.com>
* exec.c (exec_make_note_section): Move earlier.
Since we use tkill everywhere, using kill to try to kill each lwp
individually looks suspiciously odd. We should really be using tgkill
everywhere, but at least while we don't get there this makes us
consistent.
gdb/gdbserver/
2014-07-16 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_kill_one_lwp): Use kill_lwp, not kill.
gdb/
2014-07-16 Pedro Alves <palves@redhat.com>
* linux-nat.c (kill_callback): Use kill_lwp, not kill.
I noticed that the existing code casts a function's address to 'long',
but that doesn't work correctly on some ABIs, like Win64, where long
is 32-bit and while pointers are 64-bit:
func_addr = (long) &write_basic_trace_file;
Fixing that showed there's actually another place in the file that
writes a function address to file, and therefore should clear the
Thumb bit. This commit adds a macro+function pair to centralize the
Thumb bit handling, and uses it in both places.
The rest is just enough changes to make the file build without
warnings with "-Wall -Wextra" with x86_64-w64-mingw32-gcc and
i686-w64-mingw32-gcc cross compilers, and with -m32/-m64 on x86_64
GNU/Linux. Currently with x86_64-w64-mingw32-gcc we get:
$ x86_64-w64-mingw32-gcc tfile.c -Wall -DTFILE_DIR=\"\"
tfile.c: In function 'start_trace_file':
tfile.c:51:23: error: 'S_IRGRP' undeclared (first use in this function)
S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH);
^
tfile.c:51:23: note: each undeclared identifier is reported only once for each function it appears in
tfile.c:51:31: error: 'S_IROTH' undeclared (first use in this function)
S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH);
^
tfile.c: In function 'add_memory_block':
tfile.c:79:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
ll_x = (unsigned long) addr;
^
tfile.c: In function 'write_basic_trace_file':
tfile.c:113:15: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
func_addr = (long) &write_basic_trace_file;
^
tfile.c:137:3: warning: passing argument 1 of 'add_memory_block' from incompatible pointer type [enabled by default]
add_memory_block (&testglob, sizeof (testglob));
^
tfile.c:72:1: note: expected 'char *' but argument is of type 'int *'
add_memory_block (char *addr, int size)
^
tfile.c:139:3: warning: passing argument 1 of 'add_memory_block' from incompatible pointer type [enabled by default]
add_memory_block (&testglob2, 1);
^
tfile.c:72:1: note: expected 'char *' but argument is of type 'int *'
add_memory_block (char *addr, int size)
^
tfile.c: In function 'write_error_trace_file':
tfile.c:185:3: warning: implicit declaration of function 'alloca' [-Wimplicit-function-declaration]
char *hex = alloca (len * 2 + 1);
^
tfile.c:185:15: warning: incompatible implicit declaration of built-in function 'alloca' [enabled by default]
char *hex = alloca (len * 2 + 1);
^
tfile.c:211:6: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
(long) &write_basic_trace_file);
^
Tested on x86_64 Fedora 20, -m64 and -m32.
Tested by Yao on arm targets.
gdb/testsuite/
2014-07-16 Pedro Alves <palves@redhat.com>
* gdb.trace/tfile.c: Include unistd.h and stdint.h.
(start_trace_file): Guard S_IRGRP and S_IROTH uses behind #ifdef.
(tfile_write_64, tfile_write_16, tfile_write_8, tfile_write_addr)
(tfile_write_buf): New functions.
(add_memory_block): Rewrite using the above.
(adjust_function_address): New function.
(FUNCTION_ADDRESS): New macro.
(write_basic_trace_file): Remove short_x local, and use
tfile_write_16. Change type of func_addr local to unsigned long
long. Use FUNCTION_ADDRESS instead of handling the Thumb bit
here. Cast argument of add_memory_block to char pointer.
(write_error_trace_file): Avoid alloca. Use FUNCTION_ADDRESS.
(main): Remove parameters.
* gdb.trace/tfile.exp: Remove nowarnings.
As Joel pointed out in...
https://sourceware.org/ml/gdb-patches/2014-07/msg00391.html
...it would be nice to add a test for that.
Tested on Linux x86_64 (Ubuntu 14.10).
gdb/testsuite/ChangeLog
2014-07-15 Simon Marchi <simon.marchi@ericsson.com>
* gdb.base/debug-expr.exp: Test string evaluation with
"debug expression" on.
A comment in target.h went past the column limit. This patch
reformats it. I'm pushing this as obvious.
2014-07-16 Tom Tromey <tromey@redhat.com>
* target.h (struct target_ops) <to_delete_record>: Reformat
comment.
target-delegates.c was out of date. This patch rebuilds it.
Built and regtested on x86-64 Fedora 20.
Committed as obvious.
2014-07-16 Tom Tromey <tromey@redhat.com>
* target-delegates.c: Rebuild.
The other day I noticed that default_gdb_start reuses the GDB process
if it has been spawned already:
proc default_gdb_start { } {
...
if [info exists gdb_spawn_id] {
return 0
}
I was a bit surprised, and so I hacked in an error to check whether
anything is relying on it:
+ if [info exists gdb_spawn_id] {
+ error "GDB already spawned"
+ }
And lo, that tripped on a funny buglet (see below). The comment in
reread.exp says "Restart GDB entirely", but in reality, due to the
above, that's not what is happening, as a gdb_exit call is missing.
The test is proceeding with the previous GDB process...
I don't really want to go hunt for whether there's an odd setup out
there that assumes this in its board file or something, so for now,
I'm taking the simple route of just making the test do what it says it
does. I think this much makes it an obvious fix.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(gdb) PASS: gdb.base/reread.exp: run to foo() second time
ERROR: tcl error sourcing ../src/gdb/testsuite/gdb.base/reread.exp.
ERROR: GDB already spawned
while executing
"error "GDB already spawned""
invoked from within
"if [info exists gdb_spawn_id] {
error "GDB already spawned"
}"
(procedure "default_gdb_start" line 22)
invoked from within
"default_gdb_start"
(procedure "gdb_start" line 2)
invoked from within
"gdb_start"
invoked from within
"if [is_remote target] {
unsupported "second pass: GDB should check for changes before running"
} else {
# Put the older executable back in pl..."
(file "../src/gdb/testsuite/gdb.base/reread.exp" line 114)
invoked from within
"source ../src/gdb/testsuite/gdb.base/reread.exp"
("uplevel" body line 1)
invoked from within
"uplevel #0 source ../src/gdb/testsuite/gdb.base/reread.exp"
invoked from within
"catch "uplevel #0 source $test_file_name""
testcase ../src/gdb/testsuite/gdb.base/reread.exp completed in 1 seconds
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gdb/testsuite/
2014-07-15 Pedro Alves <palves@redhat.com>
* gdb.base/reread.exp: Use clean_restart.
The __flash qualifier is part of the named address spaces for AVR [1]. It
allows putting read-only data in the flash memory, normally reserved for
code.
When used together with a pointer, the DW_AT_address_class attribute is set
to 1 and allows GDB to detect that when it will be dereferenced, the data
will be loaded from the flash memory (with the LPM instruction).
We can now properly debug the following code:
~~~
const __flash char data_in_flash = 0xab;
int
main (void)
{
const __flash char *pointer_to_flash = &data_in_flash;
}
~~~
~~~
(gdb) print pointer_to_flash
$1 = 0x1e8 <data_in_flash> "\253"
(gdb) print/x *pointer_to_flash
$2 = 0xab
(gdb) x/x pointer_to_flash
0x1e8 <data_in_flash>: 0xXXXXXXab
~~~
Whereas previously, GDB would revert to the default address space which is
RAM and mapped in higher memory:
~~~
(gdb) print pointer_to_flash
$1 = 0x8001e8 ""
~~~
[1] https://gcc.gnu.org/onlinedocs/gcc/Named-Address-Spaces.html
2014-07-15 Pierre Langlois <pierre.langlois@embecosm.com>
gdb/
* avr-tdep.c (AVR_TYPE_ADDRESS_CLASS_FLASH): New macro.
(AVR_TYPE_INSTANCE_FLAG_ADDRESS_CLASS_FLASH): Likewise.
(avr_address_to_pointer): Check for AVR_TYPE_ADDRESS_CLASS_FLASH.
(avr_pointer_to_address): Likewise.
(avr_address_class_type_flags): New function.
(avr_address_class_type_flags_to_name): Likewise.
(avr_address_class_name_to_type_flags): Likewise.
(avr_gdbarch_init): Set address_class_type_flags,
address_class_type_flags_to_name and
address_class_name_to_type_flags.
gdb/testsuite/
* gdb.arch/avr-flash-qualifer.c: New.
* gdb.arch/avr-flash-qualifer.exp: New.
The fix that went into GDBserver is also needed on the GDB side.
Although most compilers follow right-to-left evaluation order, the
order of evaluation of a function call's arguments is really
unspecified. target_pid_to_str may well clobber errno when we get to
evaluate the third argument to fprintf_unfiltered.
gdb/
2014-07-15 Pedro Alves <palves@redhat.com>
* linux-nat.c (kill_callback): Save errno and work with saved
copy.
For some reason, OP_STRING is not handled in dump_subexp_body_standard.
This makes the output of "set debug expression 1" very bad when a string
is involved. Example:
(gdb) set debug expression 1
(gdb) print "hello"
... (random garbage, possibly segfault)
This commit handles OP_STRING and skips the appropriate number of exp
elements. The line corresponding to the string now looks like:
0 OP_STRING Language-specific string type: 0
gdb/ChangeLog:
2014-07-15 Simon Marchi <simon.marchi@ericsson.com>
* expprint.c (dump_subexp_body_standard): Handle OP_STRING.
Although most compilers follow right-to-left evaluation order, the
order of evaluation of a function call's arguments is really
unspecified. target_pid_to_str or ptid_of may well clobber errno when
we get to evaluate the third argument to debug_printf.
gdb/gdbserver/
2014-07-15 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_kill_one_lwp): Save errno and work with saved
copy.
Put GDB's terminal settings into effect when paginating
gdb/
2014-07-14 Pedro Alves <palves@redhat.com>
* utils.c (prompt_for_continue): Call target_terminal_ours.
gdb/testsuite/
2014-07-14 Pedro Alves <palves@redhat.com>
* gdb.base/paginate-after-ctrl-c-running.c: New file.
* gdb.base/paginate-after-ctrl-c-running.exp: New file.
When the target is resumed in the foreground, we put the inferior's
terminal settings into effect, and remove stdin from the event loop.
When the target stops, we put GDB's terminal settings into effect
again, and re-register stdin in the event loop, ready for user input.
The former is done by target_terminal_inferior, and the latter by
target_terminal_ours.
There's an intermediate -- target_terminal_ours_for_output -- that is
called when printing output related to target events, and we don't
know yet whether we'll stop the program. That puts our terminal
settings into effect, enough to get proper results from our output,
but leaves input wired into the inferior.
If such output paginates, then we need the full target_terminal_ours
in order for the user to be able to provide input to answer the
pagination query.
The test in this commit hangs in async-capable targets without the fix
(as the user/test can't answer the pagination query). It doesn't hang
on sync targets because on those we don't unregister stdin from the
event loop while the target is running (because we block in
target_wait instead of in the event loop in that case).
gdb/
2014-07-14 Pedro Alves <palves@redhat.com>
* utils.c (prompt_for_continue): Call target_terminal_ours.
gdb/testsuite/
2014-07-14 Pedro Alves <palves@redhat.com>
* gdb.base/paginate-after-ctrl-c-running.c: New file.
* gdb.base/paginate-after-ctrl-c-running.exp: New file.
If an error is thrown while handling a target event (within
fetch_inferior_event), and, the interpreter is not async (but the
target is), then GDB prints the prompt twice.
One way to see that in action is throw a QUIT while in a pagination
prompt issued from within fetch_inferior_event (or one of its
callees). E.g. from the test:
---Type <return> to continue, or q <return> to quit---
^CQuit
(gdb) (gdb) p 1
^^^^^^^^^^^
$1 = 1
(gdb)
The issue is that inferior_event_handler swallows errors and notifies
the observers (the interpreters) about the command error, even if the
interpreter is forced sync while we're handling a nested event loop
(for execute_command). The observers print a prompt, and then when we
get back to the top event loop, we print another (in
start_event_loop).
I see no reason the error should be swallowed here. Just cancel the
execution related bits and let the error propagate to the top level
(start_event_loop), which re-enables stdin and notifies observers.
gdb/
2014-07-14 Pedro Alves <palves@redhat.com>
* inf-loop.c (inferior_event_handler): Use TRY_CATCH instead of
catch_errors. Don't re-enable stdin or notify observers where,
and rethrow error.
(fetch_inferior_event_wrapper): Delete.
gdb/testsuite/
2014-07-14 Pedro Alves <palves@redhat.com>
* gdb.base/double-prompt-target-event-error.c: New file.
* gdb.base/double-prompt-target-event-error.exp: New file.
If a pagination prompt triggers while the target is running, and the
target exits before the user responded to the pagination query, this
happens:
Starting program: foo
---Type <return> to continue, or q <return> to quit---No unwaited-for children left.
Couldn't get registers: No such process.
Couldn't get registers: No such process.
Couldn't get registers: No such process.
(gdb) Couldn't get registers: No such process.
(gdb)
To reiterate, the user hasn't replied to the pagination prompt above.
A pagination query nests an event loop (in gdb_readline_wrapper). In
async mode, in addition to stdin and signal handlers, we'll have the
target also installed in the event loop still. So if the target
reports an event, that wakes up the nested event loop, which calls
into fetch_inferior_event etc. to handle the event which generates
further output, all while we should be waiting for pagination
confirmation...
(TBC, any target event that generates output ends up spuriously waking
up the pagination, though exits seem to be the worse kind.)
I've played with a couple different approaches to fixing this, while
at the same time trying to avoid being invasive. Both revolve around
not listening to target events while in a pagination prompt (doing
anything else I think would be a much bigger change).
The approach taken just removes the target from the event loop while
within gdb_readline_wrapper. The other approach used gdb_select
directly, with only input_fd installed, but that had the issue that it
didn't handle the async signal handlers, and turned out to be a bit
more code than the first version.
gdb/
2014-07-14 Pedro Alves <palves@redhat.com>
PR gdb/17072
* top.c: Include "inf-loop.h".
(struct gdb_readline_wrapper_cleanup) <target_is_async_orig>: New
field.
(gdb_readline_wrapper_cleanup): Make the target async again, if it
was async before.
(gdb_readline_wrapper): Store whether the target is async, and
make it sync.
gdb/testsuite/
2014-07-14 Pedro Alves <palves@redhat.com>
PR gdb/17072
* gdb.base/paginate-inferior-exit.c: New file.
* gdb.base/paginate-inferior-exit.exp: New file.
If pagination occurs as result of output sent as response to a target
event while the target is executing in the background, subsequent
input aborts readline/gdb:
$ gdb program
...
(gdb) continue&
Continuing.
(gdb)
---Type <return> to continue, or q <return> to quit---
*return*
---Type <return> to continue, or q <return> to quit---
Breakpoint 2, after_sleep () at paginate-bg-execution.c:21
---Type <return> to continue, or q <return> to quit---
21 return; /* after sleep */
p 1
readline: readline_callback_read_char() called with no handler!
*abort/SIGABRT*
$
gdb_readline_wrapper_line removes the handler after a line is
processed. Usually, we'll end up re-displaying the prompt, and that
reinstalls the handler. But if the output is coming out of handling
a stop event, we don't re-display the prompt, and nothing restores the
handler. So the next input wakes up the event loop and calls into
readline, which aborts.
We should do better with the prompt handling while the target is
running (I think we should coordinate with readline, and
hide/redisplay it around output), but that's a more invasive change
better done post 7.8, so this patch is conservative and just
reinstalls the handler as soon as we're out of the readline line
callback.
gdb/
2014-07-14 Pedro Alves <palves@redhat.com>
PR gdb/17072
* top.c (gdb_readline_wrapper_line): Tweak comment.
(gdb_readline_wrapper_cleanup): If readline is enabled, reinstall
the input handler callback.
gdb/testsuite/
2014-07-14 Pedro Alves <palves@redhat.com>
PR gdb/17072
* gdb.base/paginate-bg-execution.c: New file.
* gdb.base/paginate-bg-execution.exp: New file.
This fixes:
$ ./gdb program -ex "set height 2" -ex "start"
...
Reading symbols from /home/pedro/gdb/tests/threads...done.
---Type <return> to continue, or q <return> to quit---^CQuit << ctrl-c triggers a Quit
*type something*
readline: readline_callback_read_char() called with no handler!
Aborted
$
Usually, if an error propagates all the way to the top level, we'll
re-enable stdin, in case the command that was running was a
synchronous command. That's done in the event loop's actual loop
(event-loop.c:start_event_loop). However, if a foreground execution
command is run before the event loop starts and throws, nothing is
presently reenabling stdin, which leaves sync_execution set.
When we do start the event loop, because sync_execution is still
(mistakenly) set, display_gdb_prompt removes the readline input
callback, even though stdin is registered in the event loop. Any
input from here on results in readline aborting.
Such commands are run through catch_command_errors,
catch_command_errors_const, so add the tweak there.
gdb/
2014-07-14 Pedro Alves <palves@redhat.com>
PR gdb/17072
* main.c: Include event-top.h.
(handle_command_errors): New function.
(catch_command_errors, catch_command_errors_const): Use it.
gdb/testsuite/
2014-07-14 Pedro Alves <palves@redhat.com>
PR gdb/17072
* gdb.base/paginate-execution-startup.c: New file.
* gdb.base/paginate-execution-startup.exp: New file.
* lib/gdb.exp (pagination_prompt): New global.
(default_gdb_spawn): New procedure, factored out from
default_gdb_spawn.
(default_gdb_start): Adjust to call default_gdb_spawn.
(gdb_spawn): New procedure.
Often we'll do something like:
if {$ok} {
fail "whatever"
} else {
pass "whatever"
}
This adds a helper procedure for that, and converts one random place
to use it, as an example.
2014-07-14 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (gdb_assert): New procedure.
* gdb.trace/backtrace.exp (gdb_backtrace_tdp_4): Use it.
We'll need to add error handling code to commands run before the event
loop starts (commands in .gdbinit, -ex commands, etc.). Turns out
those are run through catch_command_errors, and, catch_command_errors
is used nowhere else. Move it (and the _const variant) to main.c, so
that we can further specialize it freely.
gdb/
2014-07-14 Pedro Alves <palves@redhat.com>
* exceptions.c (catch_command_errors, catch_command_errors_const):
Moved to main.c.
* exceptions.h (catch_command_errors_ftype)
(catch_command_errors_const_ftype): Moved to main.c.
(catch_command_errors, catch_command_errors_const): Delete
declarations.
* main.c (catch_command_errors_ftype)
(catch_command_errors_const_ftype): Moved here from exceptions.h.
(catch_command_errors, catch_command_errors_const)): Moved here
from exceptions.c and make static.
exception_print and exception_fprintf call print_flush, which does all the
same flushing and annotation things that print_any_exception does, and more.
gdb/
2014-07-14 Pedro Alves <palves@redhat.com>
* exceptions.c (print_any_exception): Delete.
(catch_exceptions_with_msg): Use exception_print instead of
print_any_exception.
(catch_errors): Use exception_fprintf instead of
print_any_exception.
(catch_command_errors, catch_command_errors_const): Use
exception_print instead of print_any_exception.
The "call" and "print" commands presently always run synchronously, in
the foreground, but GDB currently forgets to put the inferior's
terminal settings into effect while running them, on async-capable
targets, resulting in:
(gdb) print func ()
hello world
Program received signal SIGTTOU, Stopped (tty output).
0x000000373bceb8d0 in __libc_tcdrain (fd=1) at ../sysdeps/unix/sysv/linux/tcdrain.c:29
29 return INLINE_SYSCALL (ioctl, 3, fd, TCSBRK, 1);
The program being debugged was signaled while in a function called from GDB.
GDB remains in the frame where the signal was received.
To change this behavior use "set unwindonsignal on".
Evaluation of the expression containing the function
(func) will be abandoned.
When the function is done executing, GDB will silently stop.
(gdb)
That's because target_terminal_inferior skips actually doing anything
if running in the background, and, nothing is setting sync_execution
while running infcalls:
void
target_terminal_inferior (void)
{
/* A background resume (``run&'') should leave GDB in control of the
terminal. Use target_can_async_p, not target_is_async_p, since at
this point the target is not async yet. However, if sync_execution
is not set, we know it will become async prior to resume. */
if (target_can_async_p () && !sync_execution)
return;
This would best be all cleaned up by making GDB not even call
target_terminal_inferior and try to pass the terminal to the inferior
if running in the background, but that's a more invasive fix that is
better done post-7.8.
This was originally caught by a patch later in this series that makes
catch_command_errors use exception_print instead of
print_any_exception. Note that print_flush calls serial_drain_output
while print_any_exception doesnt't have that bit. And,
gdb.gdb/python-selftest.exp does:
gdb_test "call catch_command_errors(execute_command, \"python print 5\", 0, RETURN_MASK_ALL)" \
"Python not initialized.* = 0"
which without this fix results in SIGTTOU...
gdb/
2014-07-14 Pedro Alves <palves@redhat.com>
* infcall.c (run_inferior_call): Set 'sync_execution' while
running the inferior call.
gdb/testsuite/
2014-07-14 Pedro Alves <palves@redhat.com>
* gdb.base/execution-termios.c: New file.
* gdb.base/execution-termios.exp: New file.
Hasn't been used in years.
gdb/
2014-07-14 Pedro Alves <palves@redhat.com>
* value.c (value_contents_equal): Delete function.
* value.h (value_contents_equal): Delete declaration.
This fixes PR 17106, a regression in printing.
The bug is that resolve_dynamic_type follows struct members and
references, but doesn't consider the possibility of infinite
recursion.
This patch fixes the problem by limiting reference following to the
topmost layer of calls -- that is, reference-typed struct members are
never considered as being VLAs.
Built and regtested on x86-64 Fedora 20.
New test case included.
2014-07-14 Tom Tromey <tromey@redhat.com>
PR exp/17106:
* gdbtypes.c (is_dynamic_type_internal): New function, from
is_dynamic_type.
(is_dynamic_type): Rewrite.
(resolve_dynamic_union): Use resolve_dynamic_type_internal.
(resolve_dynamic_struct): Likewise.
(resolve_dynamic_type_internal): New function, from
resolve_dynamic_type.
(resolve_dynamic_type): Rewrite.
2014-07-14 Tom Tromey <tromey@redhat.com>
* gdb.cp/vla-cxx.cc: New file.
* gdb.cp/vla-cxx.exp: New file.
This fixes the record "run" regression pointed out by Marc Khouzam:
https://sourceware.org/ml/gdb/2014-06/msg00096.html
The bug is that target_require_runnable must agree with the handling
of the "run" target, but currently it is out of sync. This patch
fixes the problem by changing target_require_runnable to also ignore
the record_stratum.
Built and regtested on x86-64 Fedora 20.
New test case included.
2014-07-14 Tom Tromey <tromey@redhat.com>
* target.c (target_require_runnable): Also check record_stratum.
Update comment.
2014-07-14 Tom Tromey <tromey@redhat.com>
* gdb.reverse/rerun-prec.c: New file.
* gdb.reverse/rerun-prec.exp: New file.
Right now we provide a board info entry, `gdb_init_command', that allows
one to send a single command to GDB before the program to be debugged is
started. This is useful e.g. for slow remote targets to change the
default "remotetimeout" setting. Occasionally I found a need to send
multiple commands instead, however this cannot be achieved with
`gdb_init_command'.
This change therefore extends the mechanism by adding a TCL list of GDB
commands to send, via a board info entry called `gdb_init_commands'.
There is no limit as to the number of commands put there. The old
`gdb_init_command' mechanism remains supported for compatibility with
existing people's environments.
* lib/gdb-utils.exp: New file.
* lib/gdb.exp (gdb_run_cmd): Call gdb_init_commands, replacing
inline `gdb_init_command' processing.
(gdb_start_cmd): Likewise.
* lib/mi-support.exp (mi_run_cmd): Likewise.
* README: Document `gdb_init_command' and `gdb_init_commands'.
We see a fail in gdb.trace/entry-values.exp on armv4t thumb,
bt^M
#0 0x000086fc in foo (i=0, i@entry=<optimized out>, j=2, j@entry=<optimized out>)^M
#1 0x00000002 in ?? ()^M
Backtrace stopped: previous frame identical to this frame (corrupt stack?)^M
(gdb) FAIL: gdb.trace/entry-values.exp: bt (1) (pattern 1)
The fail is caused by incorrect prologue analysis, which can be illustrated by
setting a breakpoint on function foo,
(gdb) disassemble foo
Dump of assembler code for function foo:
0x000086e8 <+0>: push {r7, lr}
0x000086ea <+2>: sub sp, #8
0x000086ec <+4>: add r7, sp, #0
0x000086ee <+6>: str r0, [r7, #4]
0x000086f0 <+8>: str r1, [r7, #0]
0x000086f2 <+10>: movs r3, #0
0x000086f4 <+12>: adds r0, r3, #0
0x000086f6 <+14>: mov sp, r7
0x000086f8 <+16>: add sp, #8
0x000086fa <+18>: pop {r7}
0x000086fc <+20>: pop {r1}
0x000086fe <+22>: bx r1
End of assembler dump.
(gdb) b foo
Breakpoint 1 at 0x86fc
As we can see, GDB analyzes the prologue and skip the prologue to the last
instruction but one. The breakpoint is set within the epilogue, and GDB
skips too many instruction for prologue. This patch teaches GDB to stop
prologue analysis when goes into the epilogue. With this patch applied,
GDB is able to unwind correctly,
(gdb) bt
#0 0x000086f6 in foo (i=0, i@entry=2, j=2, j@entry=3)
#1 0x00008718 in bar (i=<optimized out>)
#2 0x00008758 in main ()
gdb:
2014-07-11 Yao Qi <yao@codesourcery.com>
* arm-tdep.c (thumb_analyze_prologue): Break the loop if
thumb_instruction_restores_sp return true.
This is a refactor patch, that moves matching instructions adjusting
SP into a new function, thumb_instruction_restores_sp. The second
call to thumb_instruction_restores_sp in thumb_in_function_epilogue_p
is a little different from the original. The original code matches
'POP <registers> without PC', but thumb_in_function_epilogue_p matches
'POP <registers> (with and without PC)'. However, GDB found one
instruction about return and is scanning the previous instruction,
which should be an instruction about return too, so the code change
doesn't affect the functionality.
gdb:
2014-07-11 Yao Qi <yao@codesourcery.com>
* arm-tdep.c (thumb_instruction_restores_sp): New function.
(thumb_in_function_epilogue_p): Call
thumb_instruction_restores_sp.
Currently, GDB matches both add/sub sp, #imm in prologue and epilogue,
which is not very precise. On the instruction level, the immediate
number in both instruction can't be negative, so 'sub sp, #imm' only
appears in prologue while 'add sp, #imm' only appears in epilogue.
Note that on assembly level, we can write 'add sp, -8', but gas will
translate to 'sub sp, 8' instruction.
This patch is to only match 'sub sp, #imm' in prologue and match
'add sp, #immm' in epilogue. It paves the way for the following
patch.
gdb:
2014-07-11 Yao Qi <yao@codesourcery.com>
* arm-tdep.c (thumb_analyze_prologue): Don't match instruction
'add sp, #imm'.
(thumb_in_function_epilogue_p): Don't match 'sub sp, #imm'.
This commit merges the comments and whitespace in the common
parts of i386-linux-nat.c and amd64-linux-nat.c.
gdb/
2014-07-11 Gary Benson <gbenson@redhat.com>
* amd64-linux-nat.c: Comment and whitespace changes.
* i386-linux-nat.c: Comment and whitespace changes.
This commit adds two new helpers, x86_linux_create_target and
x86_linux_add_target, to hold the parts of _initialize_i386_linux_nat
and _initialize_amd64_linux_nat which are common.
gdb/
2014-07-11 Gary Benson <gbenson@redhat.com>
* amd64-linux-nat.c (x86_linux_create_target): New function.
(x86_linux_add_target): Likewise.
(_initialize_amd64_linux_nat): Delegate to the above new functions.
* i386-linux-nat.c (x86_linux_create_target): New function.
(x86_linux_add_target): Likewise.
(_initialize_i386_linux_nat): Delegate to the above new functions.
This commit adds a new helper, x86_linux_get_thread_area, to
hold the common parts of the ps_get_thread_area functions in
i386-linux-nat.c and amd64-linux-nat.c.
gdb/
2014-07-11 Gary Benson <gbenson@redhat.com>
* amd64-linux-nat.c (x86_linux_get_thread_area): New function.
(ps_get_thread_area): Delegate to the above in 32-bit mode.
* i386-linux-nat.c (x86_linux_get_thread_area): New function.
(ps_get_thread_area): Delegate to the above.
This commit merges i386_ and amd64_linux_read_description, renaming
both to x86_linux_read_description.
gdb/
2014-07-11 Gary Benson <gbenson@redhat.com>
* amd64-linux-nat.c (amd64_linux_read_description): Renamed to
x86_linux_read_description. All uses updated. amd64-specific
code conditionalized. Conditionalized i386-specific code added.
Redundant cast removed.
* i386-linux-nat.c (i386_linux_read_description): Renamed to
x86_linux_read_description. All uses updated. i386-specific
code conditionalized. Conditionalized amd64-specific code added.
One sizeof replaced with the actual type it is describing.
amd64-linux-nat.c and i386-linux-nat.c contain a number of functions
which are identical but for prefix on their names. This commit
renames all such functions to have the prefix x86_ instead of the
prefixes amd64_ or i386_ and updates all uses of those functions.
The now-identical x86_ functions will be pulled out to a separate
shared file in a later commit.
gdb/
2014-07-11 Gary Benson <gbenson@redhat.com>
* amd64-linux-nat.c (amd64_linux_dr_get): Renamed to
x86_linux_dr_get. All uses updated.
(amd64_linux_dr_set): Renamed to
x86_linux_dr_set. All uses updated.
(amd64_linux_dr_get_addr): Renamed to
x86_linux_dr_get_addr. All uses updated.
(amd64_linux_dr_get_control): Renamed to
x86_linux_dr_get_control. All uses updated.
(amd64_linux_dr_get_status): Renamed to
x86_linux_dr_get_status. All uses updated.
(amd64_linux_dr_set_control): Renamed to
x86_linux_dr_set_control. All uses updated.
(amd64_linux_dr_set_addr): Renamed to
x86_linux_dr_set_addr. All uses updated.
(amd64_linux_prepare_to_resume): Renamed to
x86_linux_prepare_to_resume. All uses updated.
(amd64_linux_new_thread): Renamed to
x86_linux_new_thread. All uses updated.
(amd64_linux_new_fork): Renamed to
x86_linux_new_fork. All uses updated.
(amd64_linux_child_post_startup_inferior): Renamed to
x86_linux_child_post_startup_inferior. All uses updated.
(amd64_linux_enable_btrace): Renamed to
x86_linux_enable_btrace. All uses updated.
(amd64_linux_disable_btrace): Renamed to
x86_linux_disable_btrace. All uses updated.
(amd64_linux_teardown_btrace): Renamed to
x86_linux_teardown_btrace. All uses updated.
(amd64_linux_read_btrace): Renamed to
x86_linux_read_btrace. All uses updated.
* i386-linux-nat.c (i386_linux_dr_get): Renamed to
x86_linux_dr_get. All uses updated.
(i386_linux_dr_set): Renamed to
x86_linux_dr_set. All uses updated.
(i386_linux_dr_get_addr): Renamed to
x86_linux_dr_get_addr. All uses updated.
(i386_linux_dr_get_control): Renamed to
x86_linux_dr_get_control. All uses updated.
(i386_linux_dr_get_status): Renamed to
x86_linux_dr_get_status. All uses updated.
(i386_linux_dr_set_control): Renamed to
x86_linux_dr_set_control. All uses updated.
(i386_linux_dr_set_addr): Renamed to
x86_linux_dr_set_addr. All uses updated.
(i386_linux_prepare_to_resume): Renamed to
x86_linux_prepare_to_resume. All uses updated.
(i386_linux_new_thread): Renamed to
x86_linux_new_thread. All uses updated.
(i386_linux_new_fork): Renamed to
x86_linux_new_fork. All uses updated.
(i386_linux_child_post_startup_inferior): Renamed to
x86_linux_child_post_startup_inferior. All uses updated.
(i386_linux_enable_btrace): Renamed to
x86_linux_enable_btrace. All uses updated.
(i386_linux_disable_btrace): Renamed to
x86_linux_disable_btrace. All uses updated.
(i386_linux_teardown_btrace): Renamed to
x86_linux_teardown_btrace. All uses updated.
(i386_linux_read_btrace): Renamed to
x86_linux_read_btrace. All uses updated.
We see the following fails on arm-none-eabi target,
print (void*)v_signed_char^M
$190 = (void *) 0x0 <_ftext>^M
(gdb) FAIL: gdb.base/exprs.exp: print (void*)v_signed_char (print
(void*)v_signed_char)
GDB behaves correctly but the test assumes there is no symbol on
address 0x0. This patch is set print symbol off, so that tests below
can match the address only.
gdb/testsuite:
2014-07-11 Yao Qi <yao@codesourcery.com>
* gdb.base/exprs.exp: "set print symbol off".
Here's an example, with the new test:
gdbserver :9999 gdb.threads/kill
gdb gdb.threads/kill
(gdb) b 52
Breakpoint 1 at 0x4007f4: file kill.c, line 52.
Continuing.
Breakpoint 1, main () at kill.c:52
52 return 0; /* set break here */
(gdb) k
Kill the program being debugged? (y or n) y
gdbserver :9999 gdb.threads/kill
Process gdb.base/watch_thread_num created; pid = 9719
Listening on port 1234
Remote debugging from host 127.0.0.1
Killing all inferiors
Segmentation fault (core dumped)
Backtrace:
(gdb) bt
#0 0x00000000004068a0 in find_inferior (list=0x66b060 <all_threads>, func=0x427637 <kill_one_lwp_callback>, arg=0x7fffffffd3fc) at src/gdb/gdbserver/inferiors.c:199
#1 0x00000000004277b6 in linux_kill (pid=15708) at src/gdb/gdbserver/linux-low.c:966
#2 0x000000000041354d in kill_inferior (pid=15708) at src/gdb/gdbserver/target.c:163
#3 0x00000000004107e9 in kill_inferior_callback (entry=0x6704f0) at src/gdb/gdbserver/server.c:2934
#4 0x0000000000406522 in for_each_inferior (list=0x66b050 <all_processes>, action=0x4107a6 <kill_inferior_callback>) at src/gdb/gdbserver/inferiors.c:57
#5 0x0000000000412377 in process_serial_event () at src/gdb/gdbserver/server.c:3767
#6 0x000000000041267c in handle_serial_event (err=0, client_data=0x0) at src/gdb/gdbserver/server.c:3880
#7 0x00000000004189ff in handle_file_event (event_file_desc=4) at src/gdb/gdbserver/event-loop.c:434
#8 0x00000000004181c6 in process_event () at src/gdb/gdbserver/event-loop.c:189
#9 0x0000000000418f45 in start_event_loop () at src/gdb/gdbserver/event-loop.c:552
#10 0x0000000000411272 in main (argc=3, argv=0x7fffffffd8d8) at src/gdb/gdbserver/server.c:3283
The problem is that linux_wait_for_event deletes lwps that have exited
(even those not passed in as lwps of interest), while the lwp/thread
list is being walked on with find_inferior. find_inferior can handle
the current iterated inferior being deleted, but not others.
When killing lwps, we don't really care about any of the pending
status handling of linux_wait_for_event. We can just waitpid the lwps
directly, which is also what GDB does (see
linux-nat.c:kill_wait_callback). This way the lwps are not deleted
while we're walking the list. They'll be deleted by linux_mourn
afterwards.
This crash triggers several times when running the testsuite against
GDBserver with the native-gdbserver board (target remote), but as GDB
can't distinguish between GDBserver crashing and "kill" being
sucessful, as in both cases the connection is closed (the 'k' packet
doesn't require a reply), and the inferior is gone, that results in no
FAIL.
The patch adds a generic test that catches the issue with
extended-remote mode (and works fine with native testing too). Here's
how it fails with the native-extended-gdbserver board without the fix:
(gdb) info threads
Id Target Id Frame
6 Thread 15367.15374 0x000000373bcbc98d in nanosleep () at ../sysdeps/unix/syscall-template.S:81
5 Thread 15367.15373 0x000000373bcbc98d in nanosleep () at ../sysdeps/unix/syscall-template.S:81
4 Thread 15367.15372 0x000000373bcbc98d in nanosleep () at ../sysdeps/unix/syscall-template.S:81
3 Thread 15367.15371 0x000000373bcbc98d in nanosleep () at ../sysdeps/unix/syscall-template.S:81
2 Thread 15367.15370 0x000000373bcbc98d in nanosleep () at ../sysdeps/unix/syscall-template.S:81
* 1 Thread 15367.15367 main () at .../gdb.threads/kill.c:52
(gdb) kill
Kill the program being debugged? (y or n) y
Remote connection closed
^^^^^^^^^^^^^^^^^^^^^^^^
(gdb) FAIL: gdb.threads/kill.exp: kill
Extended remote should remain connected after the kill.
gdb/gdbserver/
2014-07-11 Pedro Alves <palves@redhat.com>
* linux-low.c (kill_wait_lwp): New function, based on
kill_one_lwp_callback, but use my_waitpid directly.
(kill_one_lwp_callback, linux_kill): Use it.
gdb/testsuite/
2014-07-11 Pedro Alves <palves@redhat.com>
* gdb.threads/kill.c: New file.
* gdb.threads/kill.exp: New file.
When debugging a remote bare-metal target with "target
extended-remote" + attach, GDB won't send a qSymbol packet to initiate
symbol lookup. This happens because all the previous places in which
GDB might have done this are guarded by conditions that don't hold in
the said scenario: there are no shared libraries, no vsyscall page and
the binary file didn't change in the time passed between the "file"
and the "attach" commands.
To solve this problem remote_check_symbols is called in the
target_post_attach hook.
gdb/
2014-07-11 Adrian Sendroiu <adrian.sendroiu@freescale.com>
* remote.c (extended_remote_post_attach): New function.
(init_extended_remote_ops): Install it as to_post_attach method.
We see the fail below happens on thumb related multi-libs
(-mthumb -march={armv4t,armv7-a}),
target tfile tfile-basic.tf ^M
warning: Uploaded tracepoint 1 has no source location, using raw address^M
warning: Breakpoint address adjusted from 0x00008959 to 0x00008958.^M
Tracepoint 3 at 0x8958: file /scratch/yqi/arm-none-linux-gnueabi/src/gdb-trunk/gdb/testsuite/gdb.trace/tfile.c, line 91.^M
Created tracepoint 3 for target's tracepoint 1 at 0x8959.^M
warning: Breakpoint address adjusted from 0x00008959 to 0x00008958.^M
warning: Breakpoint address adjusted from 0x00008959 to 0x00008958.^M
warning: Breakpoint address adjusted from 0x00008959 to 0x00008958.^M
(gdb) FAIL: gdb.trace/tfile.exp: complete-command 'target tfile'
The address of write_basic_trace_file is two-bytes aligned,
(gdb) p write_basic_trace_file
$1 = {void (void)} 0x8958 <write_basic_trace_file>
but the ld sets the LSB of every reference to the function address
(indicating the address is in thumb mode), so "&write_basic_trace_file"
in the program becomes 0x8959, which is saved in the trace file. That
is why the warnnings are emitted.
This patch is to clear the LSB of the function address written to trace
file in thumb and thumb2 mode. This patch fixes the fail above.
gdb/testsuite:
2014-07-10 Yao Qi <yao@codesourcery.com>
* gdb.trace/tfile.c (write_basic_trace_file)
[__thumb__||__thumb2__]: Clear the Thumb bit of the function
address written to trace file.
On async targets, a synchronous attach is done like this:
#1 - target_attach is called (PTRACE_ATTACH is issued)
#2 - a continuation is installed
#3 - we go back to the event loop
#4 - target reports stop (SIGSTOP), event loop wakes up, and
attach continuation is called
#5 - among other things, the continuation calls
target_terminal_inferior, which removes stdin from the event
loop
Note that in #3, GDB is still processing user input. If the user is
fast enough, e.g., with something like:
echo -e "attach PID\nset xxx=1" | gdb
... then the "set" command is processed before the attach completes.
We get worse behavior even, if input is a tty and therefore
readline/editing is enabled, with e.g.,:
(gdb) attach PID\nset xxx=1
we then crash readline/gdb, with:
Attaching to program: attach-wait-input, process 14537
readline: readline_callback_read_char() called with no handler!
Aborted
$
Fix this by calling target_terminal_inferior before #3 above.
The test covers both scenarios by running with editing/readline forced
to both on and off.
gdb/
2014-07-09 Pedro Alves <palves@redhat.com>
* infcmd.c (attach_command_post_wait): Don't call
target_terminal_inferior here.
(attach_command): Call it here instead.
gdb/testsuite/
2014-07-09 Pedro Alves <palves@redhat.com>
* gdb.base/attach-wait-input.exp: New file.
* gdb.base/attach-wait-input.c: New file.
https://sourceware.org/ml/gdb-patches/2014-05/msg00383.html
The MI command -var-info-path-expression currently does not handle
non-anonymous structs / unions nested within other structs / unions,
it will skip parts of the expression. Consider this example:
## START EXAMPLE ##
$ cat ex.c
#include <string.h>
int
main ()
{
struct s1
{
int a;
};
struct ss
{
struct s1 x;
};
struct ss an_ss;
memset (&an_ss, 0, sizeof (an_ss));
return 0;
}
$ gcc -g -o ex.x ex.c
$ gdb ex.x
(gdb) break 18
Breakpoint 1 at 0x80483ba: file ex.c, line 18.
(gdb) run
Starting program: /home/user/ex.x
Breakpoint 1, main () at ex.c:18
18 return 0;
(gdb) interpreter-exec mi "-var-create an_ss * an_ss"
(gdb) interpreter-exec mi "-var-list-children an_ss"
^done,numchild="1",children=[child={name="an_ss.x",exp="x",numchild="1",type="struct s1",thread-id="1"}],has_more="0"
(gdb) interpreter-exec mi "-var-list-children an_ss.x"
^done,numchild="1",children=[child={name="an_ss.x.a",exp="a",numchild="0",type="int",thread-id="1"}],has_more="0"
(gdb) interpreter-exec mi "-var-list-children an_ss.x.a"
^done,numchild="0",has_more="0"
(gdb) interpreter-exec mi "-var-info-path-expression an_ss.x.a"
^done,path_expr="(an_ss).a"
(gdb) print (an_ss).a
There is no member named a.
## END EXAMPLE ##
Notice that the path expression returned is wrong, and as a result
the print command fails.
This patch adds a new method to the varobj_ops structure called
is_path_expr_parent, to allow language specific control over finding
the parent varobj, the current logic becomes the C/C++ version and is
extended to handle the nested cases. No other language currently uses
this code, so all other languages just get a default method.
With this patch, the above example now finishes like this:
## START EXAMPLE ##
$ gdb ex.x
(gdb) break 18
Breakpoint 1 at 0x80483ba: file ex.c, line 18.
(gdb) run
Starting program: /home/user/ex.x
Breakpoint 1, main () at ex.c:18
18 return 0;
(gdb) interpreter-exec mi "-var-list-children an_ss"
^done,numchild="1",children=[child={name="an_ss.x",exp="x",numchild="1",type="struct s1",thread-id="1"}],has_more="0"
(gdb) interpreter-exec mi "-var-list-children an_ss.x"
^done,numchild="1",children=[child={name="an_ss.x.a",exp="a",numchild="0",type="int",thread-id="1"}],has_more="0"
(gdb) interpreter-exec mi "-var-list-children an_ss.x.a"
^done,numchild="0",has_more="0"
(gdb) interpreter-exec mi "-var-info-path-expression an_ss.x.a"
^done,path_expr="((an_ss).x).a"
(gdb) print ((an_ss).x).a
$1 = 0
## END EXAMPLE ##
Notice that the path expression is now correct, and the print is a
success.
gdb/ChangeLog:
* ada-varobj.c (ada_varobj_ops): Fill in is_path_expr_parent
field.
* c-varobj.c (c_is_path_expr_parent): New function, moved core
from varobj.c, with additional checks.
(c_varobj_ops): Fill in is_path_expr_parent field.
(cplus_varobj_ops): Fill in is_path_expr_parent field.
* jv-varobj.c (java_varobj_ops): Fill in is_path_expr_parent
field.
* varobj.c (is_path_expr_parent): Call is_path_expr_parent varobj
ops method.
(varobj_default_is_path_expr_parent): New function.
* varobj.h (lang_varobj_ops): Add is_path_expr_parent field.
(varobj_default_is_path_expr_parent): Declare new function.
gdb/testsuite/ChangeLog:
* gdb.mi/var-cmd.c (do_nested_struct_union_tests): New function
setting up test structures.
(main): Call new test function.
* gdb.mi/mi2-var-child.exp: Create additional breakpoint in new
test function, continue into test function and walk test
structures.
We see some fails in gdb.trace/entry-values.exp in thumb mode
(-mthumb -march={armv4t,armv7-a}).
In thumb mode, the lsb of references to 'foo' and 'bar' in the assembly
(produced by dwarf assember) is set, so the generated debug
information is incorrect.
This patch copies the approach used by
[PATCH 4/4] Fix dw2-ifort-parameter.exp on PPC64
https://sourceware.org/ml/gdb-patches/2014-03/msg00202.html
to introduce new labels 'foo_start' and 'bar_start' which are about
the correct function address (without lsb set). This patch fixes
these fails we've seen.
gdb/testsuite:
2014-07-08 Yao Qi <yao@codesourcery.com>
* gdb.trace/entry-values.c: Define labels 'foo_start' and
'bar_start' at the beginning of functions 'foo' and 'bar'
respectively.
* gdb.trace/entry-values.exp: Use 'foo_start' and 'bar_start'
instead of 'foo' and 'bar'.
The reverse-finish command results in an internal error if it cannot determine
the current function.
(gdb) c
Continuing.
Program received signal SIGSEGV, Segmentation fault.
0x0000000000000000 in ?? ()
(gdb) reverse-finish
Run back to call of #0 0x0000000000000000 in ?? ()
gdb/infcmd.c:1576: internal-error: Finish: couldn't find function.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) y
This is not an internal error case since the command may be used in scenarios
where there is no function at the current PC, e.g. after calling through a bad
function pointer.
Turn this into a normal error.
gdb/
* infcmd.c (finish_backward): Turn internal error into normal error.
testsuite/
* gdb.btrace/segv.c: New.
* gdb.btrace/segv.exp: New.
On Windows, with "maint set target-async on" (the default since
a09dd441), Ctrl-C fails to stop a remote target.
With maint target-async on, the SIGINT signal handler doesn't send the
remote interrupt request immediately. Instead, it marks an async
handler as ready, and then the main event loop wakes up and notices
that the SIGINT async signal handler token was set, and calls the
corresponding event handler, which sends the remote interrupt request.
On POSIX-like systems, the SIGINT signal makes the select/poll in the
main event loop wake up / return with EINTR. However, on Windows,
signal handlers run on a separate thread, and Windows doesn't really
have a concept of EINTR. So, just marking the async handler
(effectively just setting a flag) does not wake up gdb_select.
Instead, we need to call gdb_call_async_signal_handler from the signal
handler. The Windows version (in mingw-hdep.c) sets a Windows event
that gdb_select's WaitForMultipleObjects is waiting for.
Confirmed that with this, Ctrl-C interrupts the remote target on
Windows. Also regression tested on x86_64 Fedora 20 against
GDBserver.
gdb/
2014-07-07 Pedro Alves <palves@redhat.com>
* remote.c (async_handle_remote_sigint)
(async_handle_remote_sigint_twice): Call
gdb_call_async_signal_handler instead of
mark_async_signal_handler.
This changes to_info_record to use target delegation.
Also, target_info_record was unused, so this patch removes it.
2014-07-07 Tom Tromey <tromey@redhat.com>
* target-delegates.c: Rebuild.
* target.c (target_info_record): Remove.
* record.c (info_record_command): Unconditionally call
to_info_record.
* target.h (struct target_ops) <to_info_record>: Use
TARGET_DEFAULT_IGNORE.
(target_info_record): Remove.
This converts to_get_thread_local_address to use
TARGET_DEFAULT_NORETURN. One possible oddity is that this changes the
text of the kind of exception thrown in some cases. This doesn't seem
to be a problem; in fact perhaps the final call to 'error' in
target_translate_tls_address should be changed to call
generic_tls_error.
2014-07-07 Tom Tromey <tromey@redhat.com>
* target.h (struct target_ops) <to_get_thread_local_address>: Use
TARGET_DEFAULT_NORETURN.
* target.c (generic_tls_error): New function.
(target_translate_tls_address): Don't search target stack.
* target-delegates.c: Rebuild.
* ppc-linux-tdep.c (ppc_linux_spe_context): Don't search target
stack.
* linux-thread-db.c (thread_db_get_thread_local_address):
Unconditionally call beneath target.
does in a way, because the arm/aarch64 branch instruction is the
same as powerpc's, but the target triplet pattern is not there.
In summary, the testcase fails to locate the branch offset and causes
a failure and the early termination of the test.
The following patch adds a separate conditional block for powerpc (to keep
things organized), allowing the testcase to continue.
2014-07-02 Luis Machado <lgustavo@codesourcery.com>
* gdb.trace/entry-values.exp: Handle powerpc-specific branch
instruction.
gdb/proc-service.c includes several libthread_db callbacks that do not
exist in gdb/gdbserver/proc-service.c. Other than in proc_service.h,
there is no reference to any of these callbacks in any revision of
nptl_db or linuxthreads_db in glibc's git repo so it seems likely that
these functions have never been called. This commit removes them.
gdb/
2014-07-02 Gary Benson <gbenson@redhat.com>
* proc-service.c (ps_xfer_memory): Update comment.
(ps_pstop): Remove unused function.
(ps_pcontinue): Likewise.
(ps_lstop): Likewise.
(ps_lcontinue): Likewise.
(ps_lgetxregsize): Likewise.
(ps_lgetxregs): Likewise.
(ps_lsetxregs): Likewise.
(ps_plog): Likewise.
(ps_ptread): Likewise.
(ps_ptwrite): Likewise.
read_tag_const_type propagates the cv-qualifier to the array element type,
but read_tag_volatile_type didn't. Make sure that both cv-qualifiers that
apply to array types are handled the same.
gdb/ChangeLog
* dwarf2read.c (add_array_cv_type): New function.
(read_tag_const_type): Call add_array_cv_type for TYPE_CODE_ARRAY.
(read_tag_volatile_type): Likewise.
gdb/testsuite/ChangeLog
* gdb.base/constvars.c (violent, violet, vips, virgen, vulgar,
vulture, vilify, villar): New volatile array constants.
(vindictive, vegetation): New const volatile array constants.
* gdb.base/volatile.exp: Test volatile and const volatile array
types.
This patch changes a few more spots to use either cmd_sfunc_ftype or
cmd_cfunc_ftype, as appropriate. This is a bit cleaner.
Tested by rebuilding.
2014-07-01 Tom Tromey <tromey@redhat.com>
* breakpoint.c (add_catch_command): Use cmd_sfunc_ftype.
* breakpoint.h (add_catch_command): Use cmd_sfunc_ftype.
* cli/cli-decode.c (cmd_cfunc_eq, add_cmd, add_prefix_cmd)
(add_abbrev_prefix_cmd, add_info, add_com): Use cmd_cfunc_ftype.
* command.h (cmd_cfunc_ftype): Move earlier.
(add_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, cmd_cfunc_eq)
(add_com, add_info): Use cmd_cfunc_ftype.
This constifies the parameters to search_symbols and fixes up the
fallout.
Tested by rebuilding.
2014-06-30 Tom Tromey <tromey@redhat.com>
* symtab.c (operator_chars): Make parameters and return type
const.
(file_matches): Make "files" const.
(struct search_symbols_data) <files>: Now const.
(search_symbols): Make "regexp" and "files" parameters const.
Update.
(symtab_symbol_info): Remove cast.
(rbreak_command): Update.
* symtab.h (search_symbols): Update.
The test case "watchpoint-reuse-slot.exp" yields a lot of failures on
s390/s390x: all instances of awatch, rwatch, and hbreak are performed
even though they aren't supported on these targets. This is because
the test case ignores non-support error messages when probing for
support of these commands, like:
(gdb) rwatch buf.byte[0]
Target does not support this type of hardware watchpoint.
The patch adds handling for this case in the appropriate
gdb_test_multiple invocations.
gdb/testsuite/
* gdb.base/watchpoint-reuse-slot.exp: Handle the case that the
target lacks support for awatch, rwatch, or hbreak.
This patch is to add ptid into dummy_frame and extend frame_id to
dummy_frame_id (which has a ptid field). With this change, GDB uses
dummy_frame_id (thread ptid and frame_id) to find the dummy frames.
Currently, dummy frames are looked up by frame_id, which isn't
accurate in non-stop or multi-process mode. The test case
gdb.multi/dummy-frame-restore.exp shows the problem and this patch can
fix it.
Test dummy-frame-restore.exp makes two inferiors stop at
different functions, say, inferior 1 stops at f1 while inferior 2
stops at f2. Set a breakpoint to a function, do the inferior call
in two inferiors, and GDB has two dummy frames of the same frame_id.
When the inferior call is finished, GDB will look up a dummy frame
from its stack/list and restore the inferior's regcache. Two
inferiors are finished in different orders, the inferiors' states are
restored differently, which is wrong. Running dummy-frame-restore.exp
under un-patched GDB, we'll get two fails:
FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: after infcall: bt in inferior 2
FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: after infcall: bt in inferior 1
With this patch applied, GDB will choose the correct dummy_frame to
restore for a given inferior, because ptid is considered when looking up
dummy frames. Two fails above are fixed.
Regression tested on x86_64-linux, both native and gdbserver.
gdb:
2014-06-27 Yao Qi <yao@codesourcery.com>
* breakpoint.c (check_longjmp_breakpoint_for_call_dummy):
Change parameter type to 'struct thread_info *'. Caller
updated.
* breakpoint.h (check_longjmp_breakpoint_for_call_dummy):
Update declaration.
* dummy-frame.c (struct dummy_frame_id): New.
(dummy_frame_id_eq): New function.
(struct dummy_frame) <id>: Change its type to 'struct
dummy_frame_id'.
(dummy_frame_push): Add parameter ptid and save it in
dummy_frame_id.
(pop_dummy_frame_bpt): Use ptid of dummy_frame instead of
inferior_ptid.
(pop_dummy_frame): Assert that the ptid of dummy_frame equals
to inferior_ptid.
(lookup_dummy_frame): Change parameter type to 'struct
dummy_frame_id *'. Callers updated. Call dummy_frame_id_eq
instead of frame_id_eq.
(dummy_frame_pop): Add parameter ptid. Callers updated.
Update comments. Compose dummy_frame_id and pass it to
lookup_dummy_frame.
(dummy_frame_discard): Add parameter ptid.
(dummy_frame_sniffer): Compose dummy_frame_id and call
dummy_frame_id_eq instead of frame_id_eq.
(fprint_dummy_frames): Print ptid.
* dummy-frame.h: Remove comments.
(dummy_frame_push): Add ptid in declaration.
(dummy_frame_pop, dummy_frame_discard): Likewise.
gdb/testsuite:
2014-06-27 Yao Qi <yao@codesourcery.com>
* gdb.multi/dummy-frame-restore.exp: New.
* gdb.multi/dummy-frame-restore.c: New.
gdb/doc:
2014-06-27 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (Maintenance Commands): Update the output of
'maint print dummy-frames' command.
This is a trivial patch to make error_no_arg take a const argument.
2014-06-26 Tom Tromey <tromey@redhat.com>
* cli/cli-cmds.c (error_no_arg): Make "why" const.
* command.h (error_no_arg): Update.
This changes do_set_command and do_show_command to take const
arguments.
2014-06-26 Tom Tromey <tromey@redhat.com>
* cli/cli-setshow.c (do_set_command): Make "arg" const.
(do_show_command): Make "arg" const.
* cli/cli-setshow.h (do_set_command, do_show_command): Update.
This makes arguments to to_get_bookmark and to_goto_bookmark const and
fixes the fallout. Tested by rebuilding. The only thing of note is
the new split between cmd_record_goto and record_goto -- basically
separating the CLI function from a new internal API, to allow const
propagation.
2014-06-26 Tom Tromey <tromey@redhat.com>
* record-full.c (record_full_get_bookmark): Make "args" const.
(record_full_goto_bookmark): Make "raw_bookmark" const.
* record.c (record_goto): New function.
(cmd_record_goto): Use it. Now static.
* record.h (record_goto): Declare.
(cmd_record_goto): Remove declaration.
* target-delegates.c: Rebuild.
* target.h (struct target_ops) <to_get_bookmark,
to_goto_bookmark>: Make parameter const.
This makes the argument to the target_ops to_load method "const", and
fixes up the fallout. Tested by rebuilding all the affected files.
2014-06-26 Tom Tromey <tromey@redhat.com>
* defs.h (generic_load): Update.
* m32r-rom.c (m32r_load_gen): Make "filename" const.
* monitor.c (monitor_load): Make "args" const.
* remote-m32r-sdi.c (m32r_load): Make "args" const.
* remote-mips.c (mips_load_srec, pmon_load_fast): Make "args"
const.
(mips_load): Make "file" const.
* remote-sim.c (gdbsim_load): Make "args" const.
* remote.c (remote_load): Make "name" const.
* symfile.c (generic_load): Make "args" const.
* target-delegates.c: Rebuild.
* target.c (target_load): Make "arg" const.
(debug_to_load): Make "args" const.
* target.h (struct target_ops) <to_load>: Make parameter const.
(target_load): Update.
This fixes a regression that Jan pointed out.
The bug is that some names were allocated by dwarf2read on the objfile
obstack, but then passed to SYMBOL_SET_NAMES with copy_name=0. This
violates the invariant that the names must have a lifetime tied to the
lifetime of the BFD.
The fix is to allocate names on the per-BFD obstack.
I looked at all callers, direct or indirect, of SYMBOL_SET_NAMES that
pass copy_name=0. Note that only the ELF and DWARF readers do this;
other symbol readers were never updated (and perhaps cannot be,
depending on the details of the formats). This is why the patch is
relatively small.
Built and regtested on x86-64 Fedora 20.
2014-06-26 Tom Tromey <tromey@redhat.com>
PR symtab/16902:
* dwarf2read.c (fixup_go_packaging, dwarf2_compute_name)
(dwarf2_physname, read_partial_die)
(guess_partial_die_structure_name, fixup_partial_die)
(guess_full_die_structure_name, anonymous_struct_prefix)
(dwarf2_name): Use per-BFD obstack.
dummy_frame_sniffer has two local variables dummyframe and this_id,
but they are only used in the if block below. This patch is to move
them into the inner block.
gdb:
2014-06-26 Yao Qi <yao@codesourcery.com>
* dummy-frame.c (dummy_frame_sniffer): Move local variables
dummyframe and this_id into inner block below.
When I read the code, I happen to see this:
signal_pass = (unsigned char *)
xmalloc (sizeof (signal_program[0]) * numsigs);
^^^^^^^^^^^^^^
It is a typo, and this patch is to fix it.
gdb:
2014-06-26 Yao Qi <yao@codesourcery.com>
* infrun.c (_initialize_infrun): Replace "signal_program[0]"
with "signal_pass[0]" in the initialization of signal_pass.
When generating a core file using the "generate-core-file" command while
replaying with the btrace record target, we won't be able to access all
registers and all memory. This leads to the following assertion:
gdb/regcache.c:1034: internal-error: regcache_raw_supply: Assertion `regnum >= 0 && regnum < regcache->descr->nr_raw_registers' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.btrace/gcore.exp: generate-core-file core (GDB internal error)
Resyncing due to internal error.
Pretend that we are not replaying while generating a core file. This will
forward fetch and store registers as well as xfer memory calls to the target
beneath.
gdb/
* record-btrace.c (record_btrace_generating_corefile)
(record_btrace_prepare_to_generate_core)
(record_btrace_done_generating_core): New.
(record_btrace_xfer_partial, record_btrace_fetch_registers)
(record_btrace_store_registers, record_btrace_prepare_to_store):
Forward request when generating a core file.
(record_btrace_open): Set record_btrace_generating_corefile to zero.
(init_record_btrace_ops): Set to_prepare_to_generate_core and
to_done_generating_core.
testsuite/
* gdb.btrace/gcore.exp: New.
Add new target functions to_prepare_to_generate_core and
to_done_generating_core that are called before and after generating a core
file, respectively.
This allows targets to prepare for core file generation and to clean up
afterwards.
gdb/
* target.h (target_ops) <to_prepare_to_generate_core>
<to_done_generating_core>: New.
(target_prepare_to_generate_core, target_done_generating_core): New.
* target.c (target_prepare_to_generate_core)
(target_done_generating_core): New.
* target-delegates.c: Regenerate.
* gcore.c: (write_gcore_file): Rename to ...
(write_gcore_file_1): ...this.
(write_gcore_file): Call target_prepare_to_generate_core
and target_done_generating_core.
The various make_corefile_notes implementations for gdbarch as well as target
currently make an xfree cleanup on the data they return. This causes problems
when trying to put a TRY_CATCH around the make_corefile_notes call.
Specifically, we get a stale cleanup error in restore_my_cleanups.
Omit the make_cleanup and have the caller free the memory.
gdb/
* fbsd-nat.c (fbsd_make_corefile_notes): Remove make_cleanup call.
* gcore.c (write_gcore_file): Free memory returned from
make_corefile_notes.
* linux-tdep.c (linux_make_corefile_notes): Remove make_cleanup call.
* procfs.c (procfs_make_note_section): Remove make_cleanup call.
In arm-tdep.c, arm_skip_stub is installed to gdbarch
skip_trampoline_code, but in arm-linux-tdep.c,
find_solib_trampoline_target is installed to skip_trampoline_code.
That means gdb configured for arm-linux target doesn't recognize some
arm specific trampolines or stubs. Beside handling generic solib
trampoline, gdb for arm-linux target should be able to handle arm
specific trampolines. This patch is to skip arm specific stubs, if
any, and as a fallback, skip the generic solib trampoline.
gdb:
2014-06-24 Yao Qi <yao@codesourcery.com>
* arm-linux-tdep.c (arm_linux_skip_trampoline_code): New.
(arm_linux_init_abi): Set skip_trampoline_code with
gdbarch_skip_trampoline_code instead of
find_solib_trampoline_target.
In target arm-none-eabi, prologue unwinder is used for trampoline
'bx reg'. However, in target arm-linux, exidx unwinder is selected for
trampoline at first, which is not expected. The main function and the
trampoline is,
0x00009dfc <main+0>: push {r4, r5, r6, r7, lr}
......
0x0000ac30 <main+3636>: ldrdeq r3, [r1], -r8
0x0000ac34: bx r2
0x0000ac36: bx r4
and .ARM.exidx is:
0x9dfc <main>: @0xb404
Compact model index: 1
0x97 vsp = r7
0x20 vsp = vsp + 132
0x3f vsp = vsp + 256
0x80 0xf0 pop {r8, r9, r10, r11}
0xab pop {r4, r5, r6, r7, r14}
0xac38 <__aeabi_drsub>: 0x1 [cantunwind]
Trampolines 'bx r2' and 'bx r4' doesn't belong to main, but the exidx
for main is still selected form them because there is no end address
of each exidx entry.
Instead of teaching exidx unwinder ignore this trampoline (which looks
complicated and error prone), I decide to let stub unwinder to handle
trampoline, because stub undwinder is installed before exidx unwinder,
and this trampoline can be regarded as a stub too.
This patch is to add the code to match 'bx reg' trampoline in the
sniffer of stub unwinder.
gdb:
2014-06-24 Yao Qi <yao@codesourcery.com>
* arm-tdep.c (arm_stub_unwind_sniffer): Return 1 if
arm_skip_bx_reg returns non-zero.
After this patch
<https://gcc.gnu.org/ml/gcc-patches/2005-01/msg00813.html> applied to
GCC, a new trampoline is generated but GDB doesn't recognize it. This
patch is to teach GDB to understand this trampoline. See details
about this trampoline and the heuristics in the comments.
gdb:
2014-06-24 Yao Qi <yao@codesourcery.com>
* arm-tdep.c (arm_skip_bx_reg): New function.
(arm_skip_stub): Call arm_skip_bx_reg.
This patch fixes this on x86 Linux:
(gdb) watch *buf@2
Hardware watchpoint 8: *buf@2
(gdb) si
0x00000000004005a7 34 for (i = 0; i < 100000; i++); /* stepi line */
(gdb) del
Delete all breakpoints? (y or n) y
(gdb) watch *(buf+1)@1
Hardware watchpoint 9: *(buf+1)@1
(gdb) si
0x00000000004005a7 in main () at ../../../src/gdb/testsuite/gdb.base/watchpoint-reuse-slot.c:34
34 for (i = 0; i < 100000; i++); /* stepi line */
Couldn't write debug register: Invalid argument.
(gdb)
In the example above the debug registers are being switched from this
state:
CONTROL (DR7): 0000000000050101 STATUS (DR6): 0000000000000000
DR0: addr=0x0000000000601040, ref.count=1 DR1: addr=0x0000000000000000, ref.count=0
DR2: addr=0x0000000000000000, ref.count=0 DR3: addr=0x0000000000000000, ref.count=0
to this:
CONTROL (DR7): 0000000000010101 STATUS (DR6): 0000000000000000
DR0: addr=0x0000000000601041, ref.count=1 DR1: addr=0x0000000000000000, ref.count=0
DR2: addr=0x0000000000000000, ref.count=0 DR3: addr=0x0000000000000000, ref.count=0
That is, before, DR7 was setup for watching a 2 byte region starting
at what's in DR0 (0x601040).
And after, DR7 is setup for watching a 1 byte region starting at
what's in DR0 (0x601041).
We always write DR0..DR3 before DR7, because if we enable a slot's
bits in DR7, you need to have already written the corresponding
DR0..DR3 registers -- the kernel rejects the DR7 write with EINVAL
otherwise.
The error shown above is the opposite scenario. When we try to write
0x601041 to DR0, DR7's bits still indicate intent of watching a 2-byte
region. That DR0/DR7 combination is invalid, because 0x601041 is
unaligned. To watch two bytes, we'd have to use two slots. So the
kernel errors out with EINVAL.
Fix this by always first clearing DR7, then writing DR0..DR3, and then
setting DR7's bits.
A little optimization -- if we're disabling the last watchpoint, then
we can clear DR7 just once. The changes to nat/i386-dregs.c make that
easier to detect, and as bonus, they make it a little easier to make
sense of DR7 in the debug logs, as we no longer need to remember we're
seeing stale bits.
Tested on x86_64 Fedora 20, native and GDBserver.
This adds an exhaustive test that switches between many different
combinations of watchpoint types and addresses and widths.
gdb/
2014-06-23 Pedro Alves <palves@redhat.com>
* amd64-linux-nat.c (amd64_linux_prepare_to_resume): Clear
DR_CONTROL before setting DR0..DR3.
* i386-linux-nat.c (i386_linux_prepare_to_resume): Likewise.
* nat/i386-dregs.c (i386_remove_aligned_watchpoint): Clear all
bits of DR_CONTROL related to the debug register slot being
disabled. If all slots are vacant, clear local slowdown as well,
and assert DR_CONTROL is 0.
gdb/gdbserver/
2014-06-23 Pedro Alves <palves@redhat.com>
* linux-x86-low.c (x86_linux_prepare_to_resume): Clear DR_CONTROL
before setting DR0..DR3.
gdb/testsuite/
2014-06-23 Pedro Alves <palves@redhat.com>
* gdb.base/watchpoint-reuse-slot.c: New file.
* gdb.base/watchpoint-reuse-slot.exp: New file.
Currently, the xmethod commands lookup xmethod matchers in the current
progspace even if the locus regular expression matches the progspace's
filename. Pretty printer commands do not match the current progspace's
filename.
gdb/
* python/lib/gdb/command/xmethods.py
(get_method_matchers_in_loci): Lookup xmethod matchers in the
current progspace only if the string "progspace" matches LOCUS_RE.
gdb/testsuite
* gdb.python/py-xmethods.exp: Use "progspace" instead of the
progspace's filename in 'info', 'enable' and 'disable' command
tests.
On x86_64 with -m32 or on i686 it will:
Running ./gdb.arch/amd64-stap-special-operands.exp ...
gdb compile failed, amd64-stap-triplet.c: Assembler messages:
amd64-stap-triplet.c:35: Error: bad register name `%rbp'
amd64-stap-triplet.c:38: Error: bad register name `%rsp'
amd64-stap-triplet.c:40: Error: bad register name `%rbp)'
amd64-stap-triplet.c:41: Error: bad register name `%rsi'
amd64-stap-triplet.c:42: Error: bad register name `%rbp)'
/tmp/ccjOdmpl.s:63: Error: bad register name `%rbp'
2014-06-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.arch/amd64-stap-special-operands.exp: Use is_lp64_target.
* gdb.arch/amd64-stap-optional-prefix.exp: Likewise.
* gdb.dwarf2/dw2-error.exp: Use istarget and is_lp64_target.
Message-ID: <20140622211401.GA3716@host2.jankratochvil.net>
I have filed now:
--with-system-readline uses bundled readline include files
https://sourceware.org/bugzilla/show_bug.cgi?id=17077
To see any effect of the patch below you have to do:
rm -rf readline
Otherwise readline include files get used the bundled ones from GDB which are
currently 6.2 while system readline may be 6.3 already.
You also have to use system readline-6.3 including its upstream patch:
[Bug-readline] Readline-6.3 Official Patch 5
http://lists.gnu.org/archive/html/bug-readline/2014-04/msg00018.html
Message-ID: <140415125618.AA57598.SM@caleb.ins.cwru.edu>
In short it happens on Fedora Rawhide since:
readline-6.3-1.fc21
https://koji.fedoraproject.org/koji/buildinfo?buildID=538941
The error is:
../../gdb/tui/tui-io.c:132:1: error: 'Function' is deprecated [-Werror=deprecated-declarations]
static Function *tui_old_rl_getc_function;
^
../../gdb/tui/tui-io.c:133:1: error: 'VFunction' is deprecated [-Werror=deprecated-declarations]
static VFunction *tui_old_rl_redisplay_function;
^
../../gdb/tui/tui-io.c:134:1: error: 'VFunction' is deprecated [-Werror=deprecated-declarations]
static VFunction *tui_old_rl_prep_terminal;
^
../../gdb/tui/tui-io.c:135:1: error: 'VFunction' is deprecated [-Werror=deprecated-declarations]
static VFunction *tui_old_rl_deprep_terminal;
^
It is since bash change:
lib/readline/rltypedefs.h
- remove old Function/VFunction/CPFunction/CPPFunction typedefs as
suggested by Tom Tromey <tromey@redhat.com>
The new typedefs used below are present in readline/rltypedefs.h since:
git://git.savannah.gnu.org/bash.git
commit 28ef6c316f1aff914bb95ac09787a3c83c1815fd
Date: Fri Apr 6 19:14:31 2001 +0000
gdb/
2014-06-20 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix --with-system-readline with readline-6.3 patch 5.
* tui/tui-io.c (tui_old_rl_getc_function, tui_old_rl_redisplay_function)
(tui_old_rl_prep_terminal, tui_old_rl_deprep_terminal): Use rl_*_t
types.
Message-ID: <20140620105004.GA22236@host2.jankratochvil.net>
This changes OBSTACK_ZALLOC and OBSTACK_CALLOC to cast their value to
the correct type. This is more type-safe and also is more in line
with the other object-allocation macros in libiberty.h.
Making this change revealed one trivial error in dwarf2read.c.
On the whole that seems pretty good to me.
Tested by rebuilding.
2014-06-20 Tom Tromey <tromey@redhat.com>
* dwarf2read.c (dw2_get_real_path): Use correct type in
OBSTACK_CALLOC.
* gdb_obstack.h (OBSTACK_ZALLOC, OBSTACK_CALLOC): Cast result.
This commit makes gdbserver access the x86 debug register accessor
functions via the same function vector as GDB proper. This removes
a chunk of conditional code that was previously in i386-{nat,low}.h
and leaves a single macro as the only GDB/gdbserver difference in
nat/i386-dregs.c.
gdb/
2014-06-20 Gary Benson <gbenson@redhat.com>
* i386-nat.h (debug_hw_points): Moved to nat/i386-dregs.c.
(i386_dr_low_type): Moved to nat/i386-dregs.h.
(i386_dr_low): Likewise.
(i386_dr_low_can_set_addr): Moved to nat/i386-dregs.c.
(i386_dr_low_set_addr): Likewise.
(i386_dr_low_get_addr): Likewise.
(i386_dr_low_can_set_control): Likewise.
(i386_dr_low_set_control): Likewise.
(i386_dr_low_get_control): Likewise.
(i386_dr_low_get_status): Likewise.
(i386_get_debug_register_length): Likewise.
* nat/i386-dregs.h (i386_dr_low_type): Moved from i386-nat.h.
(i386_dr_low): Likewise.
* nat/i386-dregs.c (i386-low.h): Remove include.
(i386-nat.h): Likewise.
(nat/i386-dregs.h): New include.
(i386_dr_low_can_set_addr): Moved from i386-nat.h.
(i386_dr_low_set_addr): Likewise.
(i386_dr_low_get_addr): Likewise.
(i386_dr_low_can_set_control): Likewise.
(i386_dr_low_set_control): Likewise.
(i386_dr_low_get_control): Likewise.
(i386_dr_low_get_status): Likewise.
(i386_get_debug_register_length): Likewise.
(debug_hw_points): Likewise.
gdb/gdbserver/
2014-06-20 Gary Benson <gbenson@redhat.com>
* i386-low.h (i386_dr_low_can_set_addr): Removed.
(i386_dr_low_set_addr): Likewise.
(i386_dr_low_get_addr): Likewise.
(i386_dr_low_can_set_control): Likewise.
(i386_dr_low_set_control): Likewise.
(i386_dr_low_get_control): Likewise.
(i386_dr_low_get_status): Likewise.
(i386_get_debug_register_length): Likewise.
* linux-x86-low.c (i386_dr_low_set_addr):
Changed signature. Made static.
(i386_dr_low_get_addr): Likewise.
(i386_dr_low_set_control): Likewise.
(i386_dr_low_get_control): Likewise.
(i386_dr_low_get_status): Likewise.
(i386_dr_low): New global variable.
* win32-i386-low.c (i386_dr_low_set_addr):
Changed signature. Made static.
(i386_dr_low_get_addr): Likewise.
(i386_dr_low_set_control): Likewise.
(i386_dr_low_get_control): Likewise.
(i386_dr_low_get_status): Likewise.
(i386_dr_low): New global variable.
The recent libiberty patch caused issues when cross building
gdbserver. The Makefile ends invoking the build machine's "ar"
instead of the --host version:
ar ./libiberty.a \
./regex.o (...)
ar: illegal option -- .
Usage: ar [emulation options] [-]{dmpqrstx}[abcfilNoPsSuvV] [member-name] [count] archive-file file...
ar -M [<mri-script]
The libiberty configure script does probe for and finds an appropriate
AR. However, gdbserver's configure does not probe for AR and
overrides the AR used in the libiberty build by explicitly passing AR
to the sub-builds.
gdb/gdbserver/
2014-06-20 Marcus Shawcroft <marcus.shawcroft@arm.com>
* configure.ac: Invoke. AC_CHECK_TOOL(AR, ar).
* Makefile.in (AR, AR_FLAGS): Define.
* configure: Regenerate.
gdb/
2014-06-05 Iain Buclaw <ibuclaw@gdcproject.org>
* Makefile.in (SFILES): Add d-exp.y.
(YYFILES): Add d-exp.c.
(YYOBJ): Add d-exp.o.
(local-maintainer-clean): Delete d-exp.c.
* d-exp.y: New file.
* d-lang.h (d_parse): New declaration.
(d_error): New declaration.
* d-lang.c (d_op_print_tab): Add entry for BINOP_CONCAT and BINOP_EXP.
Set BINOP_EQUAL and BINOP_NOTEQUAL to same precedence as other
PREC_ORDER operators.
(d_language_defn): Use d_parse, d_error instead of c_parse, c_error.
gdb/testsuite/
2014-06-05 Iain Buclaw <ibuclaw@gdcproject.org>
* gdb.dlang/expression.exp: New file.
Function any_running isn't used. This patch is to remove it.
Rebuild GDB for linux and mingw.
gdb:
2014-06-19 Yao Qi <yao@codesourcery.com>
* gdbthread.h (any_running): Remove the declaration.
* thread.c (any_running): Remove.
This patch is to change field state's type to 'enum thread_state', and
replace RUNNING with THREAD_RUNNING and STOPPED with THREAD_STOPPED
respectively in comments.
gdb:
2014-06-19 Yao Qi <yao@codesourcery.com>
* gdbthread.h (struct thread_info) <state>: Change its type to
'enum thread_state'. Update comments.
Running gdb.threads/thread-execl.exp with scheduler-locking set to
"step" reveals a problem:
(gdb) next^M
[Thread 0x7ffff7fda700 (LWP 27168) exited]^M
[New LWP 27168]^M
[Thread 0x7ffff74ee700 (LWP 27174) exited]^M
process 27168 is executing new program: /home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.threads/thread-execl^M
[Thread debugging using libthread_db enabled]^M
Using host libthread_db library "/lib64/libthread_db.so.1".^M
infrun.c:5225: internal-error: switch_back_to_stepped_thread: Assertion `!schedlock_applies (1)' failed.^M
A problem internal to GDB has been detected,^M
further debugging may prove unreliable.^M
Quit this debugging session? (y or n) FAIL: gdb.threads/thread-execl.exp: schedlock step: get to main in new image (GDB internal error)
The assertion is correct. The issue is that GDB is mistakenly trying
to switch back to an exited thread, that was previously stepping when
it exited. This is exactly the sort of thing the test wants to make
sure doesn't happen:
# Now set a breakpoint at `main', and step over the execl call. The
# breakpoint at main should be reached. GDB should not try to revert
# back to the old thread from the old image and resume stepping it
We don't see this bug with schedlock off only because a different
sequence of events makes GDB manage to delete the thread instead of
marking it exited.
This particular internal error can be fixed by making the loop over
all threads in switch_back_to_stepped_thread skip exited threads.
But, looking over other ALL_THREADS users, all either can or should be
skipping exited threads too. So for simplicity, this patch replaces
ALL_THREADS with a new macro that skips exited threads itself, and
updates everything to use it.
Tested on x86_64 Fedora 20.
gdb/
2014-06-19 Pedro Alves <palves@redhat.com>
* gdbthread.h (ALL_THREADS): Delete.
(ALL_NON_EXITED_THREADS): New macro.
* btrace.c (btrace_free_objfile): Use ALL_NON_EXITED_THREADS
instead of ALL_THREADS.
* infrun.c (find_thread_needs_step_over)
(switch_back_to_stepped_thread): Use ALL_NON_EXITED_THREADS
instead of ALL_THREADS.
* record-btrace.c (record_btrace_open)
(record_btrace_stop_recording, record_btrace_close)
(record_btrace_is_replaying, record_btrace_resume)
(record_btrace_find_thread_to_move, record_btrace_wait): Likewise.
* remote.c (append_pending_thread_resumptions): Likewise.
* thread.c (thread_apply_all_command): Likewise.
gdb/testsuite/
2014-06-19 Pedro Alves <palves@redhat.com>
* gdb.threads/thread-execl.exp (do_test): New procedure, factored
out from ...
(top level): ... here. Iterate running tests under different
scheduler-locking settings.
Three target_ops functions in i386-nat.c call other local target_ops
functions. This commit changes those functions to call the functions
in i386-dregs.c directly.
gdb/
2014-06-19 Gary Benson <gbenson@redhat.com>
* i386-nat.c (i386_stopped_by_watchpoint):
Use i386_dr_stopped_by_watchpoint.
(i386_insert_hw_breakpoint): Use i386_dr_insert_watchpoint.
(i386_remove_hw_breakpoint): Use i386_dr_remove_watchpoint.
This commit refactors i386_{insert,remove}_hw_breakpoint
to call i386_{insert,remove}_watchpoint rather than
duplicating functionality.
gdb/
2014-06-19 Gary Benson <gbenson@redhat.com>
* i386-nat.c (i386_insert_hw_breakpoint): Use
i386_insert_watchpoint.
(i386_remove_hw_breakpoint): Use i386_remove_watchpoint.
The above commit did two things:
1) A number of functions were renamed and made nonstatic.
2) A number of other functions were renamed only.
This commit reverts #1 but not #2. In addition, prototypes for
functions now remade static have been removed from i386-dregs.h.
gdb/
2014-06-19 Gary Benson <gbenson@redhat.com>
* i386-nat.c (i386_dr_show): Renamed to
i386_show_dr and made static. All uses updated.
(i386_dr_length_and_rw_bits): Renamed to
i386_length_and_rw_bits and made static.
All uses updated.
(i386_dr_insert_aligned_watchpoint): Renamed to
i386_insert_aligned_watchpoint and made static.
All uses updated.
(i386_dr_remove_aligned_watchpoint): Renamed to
i386_remove_aligned_watchpoint and made static.
All uses updated.
(i386_dr_update_inferior_debug_regs): Renamed to
i386_update_inferior_debug_regs and made static.
All uses updated.
* nat/i386-dregs.h (i386_dr_show): Removed.
(i386_dr_length_and_rw_bits): Likewise.
(i386_dr_insert_aligned_watchpoint): Likewise.
(i386_dr_remove_aligned_watchpoint): Likewise.
(i386_dr_update_inferior_debug_regs): Likewise.
gdb/gdbserver/
2014-06-19 Gary Benson <gbenson@redhat.com>
* i386-low.c (i386_dr_show): Renamed to
i386_show_dr and made static. All uses updated.
(i386_dr_length_and_rw_bits): Renamed to
i386_length_and_rw_bits and made static.
All uses updated.
(i386_dr_insert_aligned_watchpoint): Renamed to
i386_insert_aligned_watchpoint and made static.
All uses updated.
(i386_dr_remove_aligned_watchpoint): Renamed to
i386_remove_aligned_watchpoint and made static.
All uses updated.
(i386_dr_update_inferior_debug_regs): Renamed to
i386_update_inferior_debug_regs and made static.
All uses updated.
This commit wraps calls to the demangler with a segmentation fault
handler. The first time a segmentation fault is caught a core file
is generated and the user is prompted to file a bug and offered the
choice to exit or to continue their GDB session. A maintainence
option is provided to allow the user to disable the crash handler
if required.
gdb/
2014-06-19 Gary Benson <gbenson@redhat.com>
* configure.ac [AC_CHECK_FUNCS] <sigaltstack>: New check.
* configure: Regenerate.
* config.in: Likewise.
* main.c (signal.h): New include.
(setup_alternate_signal_stack): New function.
(captured_main): Call the above.
* cp-support.c (signal.h): New include.
(catch_demangler_crashes): New flag.
(SIGJMP_BUF): New define.
(SIGSETJMP): Likewise.
(SIGLONGJMP): Likewise.
(gdb_demangle_jmp_buf): New static global.
(gdb_demangle_attempt_core_dump): Likewise.
(gdb_demangle_signal_handler): New function.
(gdb_demangle): If catch_demangler_crashes is set, install the
above signal handler before calling bfd_demangle, and restore
the original signal handler afterwards. Display the offending
symbol and call demangler_warning the first time a segmentation
fault is caught.
(_initialize_cp_support): New maint set/show command.
gdb/doc/
2014-06-19 Gary Benson <gbenson@redhat.com>
* gdb.texinfo (Maintenance Commands): Document new
"maint set/show catch-demangler-crashes" option.
This commit exposes the functions that dump core outside utils.c.
can_dump_core gains a new parameter, "limit_kind", to allow either
the soft or hard limit to be checked, and its printing has separated
into the new function warn_cant_dump_core. The new function
can_dump_core_warn does what can_dump_core previously did (print and
warn).
gdb/
2014-06-19 Gary Benson <gbenson@redhat.com>
* utils.h (resource_limit_kind): New enum.
(can_dump_core): New declaration.
(warn_cant_dump_core): Likewise.
(dump_core): Likewise.
* utils.c (dump_core): Made nonstatic. Added new
parameter "limit_kind".
(can_dump_core): Made nonstatic. Moved printing code to...
(warn_cant_dump_core): New function.
(can_dump_core_warn): Likewise.
(internal_vproblem): Replace calls to can_dump_core with
calls to can_dump_core_warn. Supply new argument to each.
This commit adds a new category of internal problem for demangler
warnings. Demangler warnings behave in much the same way as internal
warnings except that they do not create core files and no option to
change this is presented to the user.
gdb/
2014-06-19 Gary Benson <gbenson@redhat.com>
* utils.h (demangler_vwarning): New declaration.
(demangler_warning): Likewise.
* utils.c (struct internal_problem)
<user_settable_should_quit>: New field.
<user_settable_should_dump_core>: Likewise
(internal_error_problem): Add values for above new fields.
(internal_warning_problem): Likewise.
(demangler_warning_problem): New static global.
(demangler_vwarning): New function.
(demangler_warning): Likewise.
(add_internal_problem_command): Selectively add commands.
(_initialize_utils): New internal problem command.
* maint.c (maintenance_demangler_warning): New function.
(_initialize_maint_cmds): New command.
gdb/doc/
2014-06-19 Gary Benson <gbenson@redhat.com>
* gdb.texinfo (Maintenance Commands): Document new
"maint demangler-warning" command and new
"maint set/show demangler-warning" option.
with type DW_FORM_string, which is wrong.
GDB was using that information to load data as strings, and then
proceeded to use the string pointers as addresses.
Even then, the test was passing just fine, because we were lucky
enough to have the low_pc string pointer smaller than the high_pc
string pointer.
Two issues are fixed. The first one is the DW_FORM_string type. The
second one is adjusting the addresses so that they are non-zero,
since GDB doesn't like seeing 0 in these fields due to a check
contained in dwarf2_get_pc_bounds:
if (low == 0 && !dwarf2_per_objfile->has_section_at_zero)
return 0;
With both fixes, the testcase passes deterministically.
2014-06-19 Luis Machado <lgustavo@codesourcery.com>
* gdb.cp/nsalias.exp: Set type of low_pc and high_pc entries
to DW_FORM_addr and use non-zero addresses.
This changes general_symbol_info to make "common_block" const.
2014-06-18 Tom Tromey <tromey@redhat.com>
* f-valprint.c (info_common_command_for_block): Update.
* symtab.h (struct general_symbol_info) <common_block>: Now
const.
Generally, the blockvector ought to be readonly. So, this patch makes
the blockvector const in the symtab, and also changes various
blockvector APIs to be const.
This patch has a couple of spots that cast away const. I consider
these to be ok because they occur in mdebugread and are used while
constructing the blockvector. I have added comments at these spots.
2014-06-18 Tom Tromey <tromey@redhat.com>
* symtab.h (struct symtab) <blockvector>: Now const.
* ada-lang.c (ada_add_global_exceptions): Update.
* buildsym.c (augment_type_symtab): Update.
* dwarf2read.c (dw2_lookup_symbol): Update.
* jit.c (finalize_symtab): Update.
* jv-lang.c (add_class_symtab_symbol): Update.
* mdebugread.c (parse_symbol, add_block, sort_blocks, new_symtab):
Update.
* objfiles.c (objfile_relocate1): Update.
* psymtab.c (lookup_symbol_aux_psymtabs)
(maintenance_check_psymtabs): Update.
* python/py-symtab.c (stpy_global_block, stpy_static_block):
Update.
* spu-tdep.c (spu_catch_start): Update.
* symmisc.c (dump_symtab_1): Update.
* symtab.c (lookup_global_symbol_from_objfile)
(lookup_symbol_aux_objfile, lookup_symbol_aux_quick)
(basic_lookup_transparent_type_quick)
(basic_lookup_transparent_type, find_pc_sect_symtab)
(find_pc_sect_line, search_symbols): Update.
* block.c (find_block_in_blockvector): Make "bl" const.
(blockvector_for_pc_sect, blockvector_for_pc): Make return type
const.
(blockvector_contains_pc): Make "bv" const.
(block_for_pc_sect): Update.
* block.h (blockvector_for_pc, blockvector_for_pc_sect)
(blockvector_contains_pc): Update.
* breakpoint.c (resolve_sal_pc): Update.
* inline-frame.c (block_starting_point_at): Update.
This changes complete_line to take a const parameter.
2014-06-18 Tom Tromey <tromey@redhat.com>
* completer.c (complete_line): Make "line_buffer" const.
* completer.h (complete_line): Update.
This removes an unneeded const cast from symtab.c:add_macro_name.
2014-06-18 Tom Tromey <tromey@redhat.com>
* symtab.c (add_macro_name): Remove unneeded cast.