gdbserver's write_inferior_memory uses a static variable to avoid
memory leaks, and has a comment referring to the lack of cleanups.
This patch removes this comment and the code in favor of a
straightforward use of std::vector.
gdb/gdbserver/ChangeLog
2019-08-15 Tom Tromey <tromey@adacore.com>
* target.c (write_inferior_memory): Use std::vector.
A customer program had a DWARF CU that consisted of just a CU DIE,
without any children. In this situation, scan_unit_for_symbols will
try to read past the end of the current CU, and will take use the
first bytes of the next CU as an abbrev, printing an error message.
This patch fixes the bug by changing scan_unit_for_symbols to stop at
the end of the CU rather than the end of the .debug_info section.
bfd/ChangeLog
2019-08-15 Tom Tromey <tromey@adacore.com>
* dwarf2.c (scan_unit_for_symbols): Check for end of CU, not end
of section.
When compiling for mips64-linux, we get:
...
src/gdb/linux-nat-trad.c:139:12: error: ‘gdbarch_num_regs’ was not declared \
in this scope
139 | regnum < gdbarch_num_regs (regcache->arch ());
...
Fix this by including gdbarch.h in linux-nat-trad.c, similar to commit
b1c896b365 "Fix gdb build on macOS".
Build on mips64-linux.
gdb/ChangeLog:
2019-08-15 Tom de Vries <tdevries@suse.de>
* linux-nat-trad.c: Include gdbarch.h.
When saving registers to the stack at the start of a function, not all state
needs to be saved. For example, only the first 64bits of float registers need
saving. However, a program may choose to store extra state if it wishes,
there is nothing preventing it doing so.
The aarch64_analyze_prologue will error if it detects extra state being
stored. Relex this restriction.
Tested via aarch64-prologue test.
gdb/ChangeLog:
* aarch64-tdep.c (aarch64_analyze_prologue): Allow any valid
register sizes.
gdb/testsuite/ChangeLog:
* gdb.arch/aarch64-prologue.c: New test.
* gdb.arch/aarch64-prologue.exp: New file.
Internal testing showed that the macOS port did not build. The
breakage was caused by the patch to remove the gdbarch.h include from
defs.h. This patch fixes the problem.
gdb/ChangeLog
2019-08-14 Tom Tromey <tromey@adacore.com>
* darwin-nat.c: Include gdbarch.h.
* darwin-nat-info.c: Include gdbarch.h.
PR 24623
* dwarf2.c (stash_comp_unit): New function, extracted from..
(_bfd_dwarf2_find_nearest_line): ..here.
(find_abstract_instance): Parse comp units and decode line info
as needed.
This parameter might appear to be used to set up offset_size, but
since git commit 024b2372f5 offset_size is either set from the
debug_info data or is set to 4.
* dwarf2.c (_bfd_dwarf2_find_nearest_line): Remove addr_size parameter.
* libbfd-in.h (_bfd_dwarf2_find_nearest_line): Update prototype.
* coffgen.c (coff_find_nearest_line_with_names): Adjust
_bfd_dwarf2_find_nearest_line calls.
* elf.c (_bfd_elf_find_nearest_line, _bfd_elf_find_line): Likewise.
* elf32-arm.c (elf32_arm_find_nearest_line): Likewise.
* elf64-alpha.c (elf64_alpha_find_nearest_line): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_find_nearest_line): Likewise.
* elfxx-mips.c (_bfd_mips_elf_find_nearest_line): Likewise.
* mach-o.c (bfd_mach_o_find_nearest_line): Likewise.
* libbfd.h: Regenerate.
The last_visible_line field of tui_gen_win_info is not used, so remove
it.
gdb/ChangeLog
2019-08-13 Tom Tromey <tom@tromey.com>
* tui/tui-data.h (struct tui_gen_win_info) <last_visible_line>:
Remove.
* tui/tui-data.c (tui_initialize_static_data): Update.
The curses library keeps track of the contents of each window, and can
redraw the screen as needed. This means that in most cases is no need
for the TUI windows to also keep track of their contents. This patch
removes content tracking from the execution window, leaving that to
curses.
gdb/ChangeLog
2019-08-13 Tom Tromey <tom@tromey.com>
* tui/tui-winsource.h (struct tui_exec_info_window)
<~tui_exec_info_window, maybe_allocate_content, get_content,
m_content>: Remove.
(struct tui_source_window_base) <set_exec_info_content,
show_exec_info_content>: Don't declare.
* tui/tui-winsource.c
(tui_exec_info_window::maybe_allocate_content): Remove.
(tui_source_window_base::update_exec_info): Rename from
set_exec_info_content.
(tui_source_window_base::show_exec_info_content)
(tui_source_window_base::update_exec_info): Remove.
After the previous patch, all calls to tui_clear_exec_info_content
come just after a call to tui_clear_source_content. Because these two
windows are linked, I think it makes sense to have
tui_clear_source_content simply do the work. So, this patch removes
tui_clear_exec_info_content.
gdb/ChangeLog
2019-08-13 Tom Tromey <tom@tromey.com>
* tui/tui-winsource.h (tui_clear_exec_info_content): Don't
declare.
* tui/tui-winsource.c (tui_update_source_window_as_is)
(tui_update_source_windows_with_addr, tui_erase_source_content):
Update.
(tui_clear_exec_info_content): Remove.
One call to tui_erase_exec_info_content can be removed. This call is
not needed because the function in question then immediately sets the
execution info window contents.
Once this is done, tui_clear_exec_info_content is just a wrapper for
the only call to tui_erase_exec_info_content, so
tui_erase_exec_info_content can be renamed and the wrapper function
removed.
gdb/ChangeLog
2019-08-13 Tom Tromey <tom@tromey.com>
* tui/tui-winsource.h (tui_erase_exec_info_content): Don't
declare.
* tui/tui-winsource.c (tui_source_window_base::refresh_all): Don't
call tui_erase_exec_info_content.
(tui_clear_exec_info_content): Rename from
tui_erase_exec_info_content.
(tui_clear_exec_info_content): Delete.
This changes tui_show_exec_info_content to be a method on
tui_source_window_base. As it is only called by other methods on this
class, it can be private.
gdb/ChangeLog
2019-08-13 Tom Tromey <tom@tromey.com>
* tui/tui-winsource.h (struct tui_source_window_base)
<show_exec_info_content>: Declare.
(tui_show_exec_info_content): Don't declare.
* tui/tui-winsource.c
(tui_source_window_base::show_exec_info_content): Rename from
tui_show_exec_info_content.
(tui_source_window_base::update_exec_info): Update.
This moves code related to the execution info window from tui-data.h
to tui-winsource.h. It fits better here because the execution info is
conceptually part of the source and disassembly windows, and
tui-winsource.h is where this common class lives.
gdb/ChangeLog
2019-08-13 Tom Tromey <tom@tromey.com>
* tui/tui-data.h (enum tui_bp_flag, tui_bp_flags, struct tui_source_element)
(TUI_BP_HIT_POS, TUI_BP_BREAK_POS, TUI_EXEC_POS)
(TUI_EXECINFO_SIZE, tui_exec_info_content): Move ...
* tui/tui-winsource.h (enum tui_bp_flag, tui_bp_flags, struct
tui_source_element, TUI_BP_HIT_POS, TUI_BP_BREAK_POS)
(TUI_EXEC_POS, TUI_EXECINFO_SIZE, tui_exec_info_content):
... here.
This changes tui_check_and_display_highlight_if_needed to be a method
on tui_win_info. This makes it clear that the NULL check in that
function is not needed, so it is removed here.
gdb/ChangeLog
2019-08-13 Tom Tromey <tom@tromey.com>
* tui/tui-winsource.c (tui_erase_source_content)
(tui_show_source_content, tui_source_window_base::refresh_all):
Update.
* tui/tui-wingeneral.h
(tui_check_and_display_highlight_if_needed): Don't declare.
* tui/tui-wingeneral.c
(tui_win_info::check_and_display_highlight_if_needed): Rename from
check_and_display_highlight_if_needed.
* tui/tui-win.c (tui_rehighlight_all)
(tui_win_info::make_visible_with_new_height): Update.
* tui/tui-regs.c (tui_data_window::display_registers_from_line)
(tui_data_window::erase_data_content)
(tui_data_window::display_all_data): Update.
* tui/tui-data.h (struct tui_win_info)
<check_and_display_highlight_if_needed>: Declare.
This changes the TUI so that when the layout changes, any windows that
are invisible are now deleted. This makes it simpler to understand
window lifetimes.
gdb/ChangeLog
2019-08-13 Tom Tromey <tom@tromey.com>
* tui/tui-win.c (tui_resize_all): Call
tui_delete_invisible_windows.
* tui/tui-layout.c (show_layout): Call
tui_delete_invisible_windows.
* tui/tui-data.h (tui_delete_invisible_windows): Declare.
* tui/tui-data.c (tui_delete_invisible_windows): New function.
tui_show_disassem does not need to call tui_add_win_to_layout, because
the callers that could change the layout have already ensured that it
exists.
gdb/ChangeLog
2019-08-13 Tom Tromey <tom@tromey.com>
* tui/tui-disasm.c (tui_show_disassem): Add assertion. Don't call
tui_add_win_to_layout.
tui_default_win_height is only used in tui-layout.c, so make it static.
gdb/ChangeLog
2019-08-13 Tom Tromey <tom@tromey.com>
* tui/tui-layout.h (tui_default_win_height): Don't declare.
* tui/tui-layout.c (tui_default_win_height): Now static.
This patch simplifies some code in tui-layout.c.
In show_layout, all the layout settings can be handled by a single
switch statement. In show_source_disasm_command and
show_source_or_disasm_and_command, there is no need to check the
current layout, as the caller has already done so.
gdb/ChangeLog
2019-08-13 Tom Tromey <tom@tromey.com>
* tui/tui-layout.c (show_layout): Unify all layout cases into a
single switch.
(show_source_disasm_command, show_source_or_disasm_and_command):
Don't check current layout.
This simplifies the implementation of tui_make_all_invisible. Also,
because show_data is only called by show_layout, this hoists the call
to tui_make_all_invisible and removes the call from show_data.
gdb/ChangeLog
2019-08-13 Tom Tromey <tom@tromey.com>
* tui/tui-wingeneral.c (make_all_visible): Remove.
(tui_make_all_invisible): Simplify.
* tui/tui-layout.c (tui_make_all_invisible): Move from
tui-wingeneral.c; simplify.
(show_layout): Hoist call to tui_make_all_invisible.
(show_data): Don't call tui_make_all_invisible.
The function tui_make_all_visible is not used, so remove it.
gdb/ChangeLog
2019-08-13 Tom Tromey <tom@tromey.com>
* tui/tui-wingeneral.h (tui_make_all_visible): Don't declare.
* tui/tui-wingeneral.c (tui_make_all_visible): Remove.
This moves the current_layout global to tui-layout.c. This allows for
the removal of an accessor function; but also it just seems clearer to
have it here.
gdb/ChangeLog
2019-08-13 Tom Tromey <tom@tromey.com>
* tui/tui-layout.c (current_layout, tui_current_layout): Move from
tui-data.c.
(show_source_disasm_command, show_data)
(show_source_or_disasm_and_command): Don't use
tui_set_current_layout_to.
* tui/tui-data.h (tui_set_current_layout_to): Don't declare.
* tui/tui-data.c (current_layout, tui_current_layout): Move to
tui-layout.c.
(tui_set_current_layout_to): Remove.
The clear_detail method can only be called on source windows, so
remove definitions from the base of the class hierarchy, leaving only
a single non-virtual method.
gdb/ChangeLog
2019-08-13 Tom Tromey <tom@tromey.com>
* tui/tui-winsource.h (struct tui_source_window_base)
<clear_detail>: No longer "override".
* tui/tui-regs.h (struct tui_data_window) <clear_detail>: Remove.
* tui/tui-regs.c (tui_data_window::clear_detail): Remove.
* tui/tui-data.h (struct tui_win_info) <clear_detail>: Remove.
* tui/tui-command.h (struct tui_cmd_window) <clear_detail>:
Remove.
* tui/tui-command.c (tui_cmd_window::clear_detail): Remove.
S_ISLNK should not be called outside of an #ifdef.
However, this specific call is actually unnecessary, because
linkok can only be 0 if S_ISLNK is true, per the code above.
I have sent a bug report to bug-readline, though it does not show
up in the online archive yet.
2019-08-13 Christian Biesinger <cbiesinger@google.com>
* colors.c (_rl_print_color_indicator): Remove unnecessary
S_ISLNK check to fix compilation on MinGW.
I was curious why updating readline caused so much to be to rebuilt,
so I look at all the uses of the readline headers. Most are included
for valid reasons (either readline directory or for tilde_expand); but
the includes in tracepoint.c didn't seem to be used.
This patch removes them. Tested by rebuilding.
gdb/ChangeLog
2019-08-13 Tom Tromey <tromey@adacore.com>
* tracepoint.c: Don't include readline.h or history.h.
With gdb.gdb/selftest.exp, we get:
...
(xgdb) PASS: gdb.gdb/selftest.exp: send SIGINT signal to child process
^M
Thread 1 "xgdb" received signal SIGINT, Interrupt.^M
0x00007ffff5bf01db in poll () from /lib64/libc.so.6^M
(gdb) FAIL: gdb.gdb/selftest.exp: send ^C to child process again
...
The failure is due to gdb printing 'Thread 1 "xgdb" received signal SIGINT',
but the regexp in the test-case expecting 'Program received signal SIGINT'.
Fix this by updating the regexp, similar to how that is done earlier in the
test-case.
gdb/testsuite/ChangeLog:
2019-08-13 Tom de Vries <tdevries@suse.de>
* gdb.gdb/selftest.exp (send ^C to child process again): Accept also
Thread.
This patch fixes several test ERRORs and FAILs seen from running
gdb.python tests on a remote Windows host. The problems fixed
generally fall into these categories:
- Failure to copy the .py script to the host.
- Confusion between build and host pathnames.
- Assuming pathnames printed on the host include "/" as a directory
separator.
- Tests that need to be conditionally disabled due to missing features
on the host, etc.
2019-08-13 Sandra Loosemore <sandra@codesourcery.com>
gdb/testsuite/
* gdb.python/py-completion.exp: Download the .py file to the host
and use its host pathname. Conditionalize tests that use
tab completion and manipulate files on the build machine.
* gdb.python/py-events.exp: Download the .py file to the host
and use its host pathname.
* gdb.python/py-evsignal.exp: Likewise.
* gdb.python/py-evthreads.exp: Likewise.
* gdb.python/py-framefilter-invalidarg.exp: Match Windows
pathname syntax.
* gdb.python/py-framefilter.exp: Download the .py file to the right
place on the host. Match Windows pathname syntax.
* gdb.python/py-mi-var-info-path-expression.exp: Download the
.py file to the host and use its host pathname.
* gdb.python/py-objfile-script.exp: Match Windows pathname syntax.
* gdb.python/py-objfile.exp: Expect a host pathname, not a
build pathname. Skip symlink test on Windows host. Add missing
newline at end of file.
* gdb.python/py-pp-maint.exp: Download the .py file to the host
and use its host pathname.
* gdb.python/py-pp-registration.exp: Match Windows pathname syntax.
* gdb.python/py-section-script.exp: Use host location of binfile
on safe-path. Use correct path separator on Windows host.
Reorder alternatives in gdb_test_multiple to prevent matching
the wrong alternative on success.
* gdb.python/py-symtab.exp: Match Windows pathname syntax.
As discussed on gdb-patches, this removes the readline hack from the
mingw-hdep.c version of gdb_select. It's believed that this is not
needed any more. See:
https://sourceware.org/ml/gdb-patches/2019-03/msg00465.html
gdb/ChangeLog
2019-08-12 Tom Tromey <tom@tromey.com>
* mingw-hdep.c (gdb_select): Remove readline hack.
After the sync there is one testsuite regression, the test
"signal SIGINT" in gdb.gdb/selftest.exp which now FAILs. Previously,
the readline 6.2 SIGINT handler would temporarily reinstall the
underlying application's SIGINT handler and immediately re-raise SIGINT
so that the orginal handler gets invoked. But now (since readline 6.3)
its SIGINT handler does not re-raise SIGINT or directly invoke the
original handler; it now sets a flag marking that SIGINT was raised, and
waits until readline explicitly has control to call the application's
SIGINT handler. Anyway, because SIGINT is no longer re-raised from
within readline's SIGINT handler, doing "signal SIGINT" with a stopped
inferior gdb process will no longer resume and then immediately stop the
process (since there is no 2nd SIGINT to immediately catch). Instead,
the inferior gdb process will now just print "Quit" and continue to run.
So with this commit, this particular test case is adjusted to reflect
this change in behavior (we now have to send a 2nd SIGINT manually to
stop it).
gdb/testsuite/ChangeLog
2019-08-12 Patrick Palka <patrick@parcs.ath.cx>
* gdb.gdb/selftest.exp (test_with_self): Update test to now
expect the GDB inferior to no longer immediately stop after
being resumed with "signal SIGINT".
There is a gdb-local patch to deal with interrupts during completion.
The original thread adding this patch is here:
https://sourceware.org/ml/gdb-patches/2011-06/msg00147.html
I believe readline now implements the approach suggested by
Chet Ramey:
https://sourceware.org/ml/gdb-patches/2011-06/msg00493.html
So, I believe this patch can be removed.
readline/ChangeLog.gdb
2018-10-07 Tom Tromey <tom@tromey.com>
* Makefile.in (xfree.o): Don't depend on readline.h.
* xfree.c (xfree): Remove gdb workaround.
* xmalloc.h (xfree): Remove #define.
There is a gdb-local patch in readline/emacs_keymap.c that says:
/* Temporary - this is a bug in readline 5.1 that should be fixed in
readline 5.2. */
So, I think this can be removed now. I have no way to test this, as
the patch was specific to mingw.
readline/ChangeLog.gdb
2018-10-07 Tom Tromey <tom@tromey.com>
* emacs_keymap.c: Remove gdb workaround.
This removes a gdb-local patch from readline's get_y_or_n. The code
references a gdb test that continues to work when I remove this patch.
So, I think it is not needed any more.
readline/ChangeLog.gdb
2018-10-07 Tom Tromey <tom@tromey.com>
* complete.c (get_y_or_n): Remove gdb workaround.
This imports readline 7.0 (up to patch 5) while preserving all
gdb-local changes.
This was done by checking out the readline git repository, making a
branch based on the gdb baseline revision, applying the gdb changes to
that branch, and then merging from readline 7.
readline/ChangeLog.gdb
2019-08-12 Tom Tromey <tom@tromey.com>
* Imported readline 7.0 patch 5.
This is a change to the first published specifications [1][a] but since there is no hardware
out there that uses the old instructions we do not want to support the old variant.
This changes are done based on the latest published specifications [1][b].
[1] https://developer.arm.com/architectures/cpu-architecture/m-profile/docs/ddi0553/latest/armv81-m-architecture-reference-manual
[a] version bf
[b] version bh
gas * config/tc-arm.c (enum operand_parse_code): Add the entry OP_I48_I64.
(po_imm1_or_imm2_or_fail): Marco to check the immediate is either of
48 or 64.
(parse_operands): Add case OP_I48_I64.
(do_mve_scalar_shift1): Add function to encode the MVE shift
instructions with 4 arguments.
* testsuite/gas/arm/mve-shift-bad.l: Modify.
* testsuite/gas/arm/mve-shift-bad.s: Likewise.
* testsuite/gas/arm/mve-shift.d: Likewise.
* testsuite/gas/arm/mve-shift.s: Likewise.
opcodes * arm-dis.c (struct mopcode32 mve_opcodes): Modify the mask for
cases MVE_SQRSHRL and MVE_UQRSHLL.
(print_insn_mve): Add case for specifier 'k' to check
specific bit of the instruction.
Half precision floating point numbers will be encoded using the IEEE 754
half precision floating point format - 16 bits in total, 1 for sign, 5
for exponent and 10 bits of mantissa.
This patch implements the float16 directive for both the IEEE 754 format
and the Arm alternative format for the Arm backend.
The syntax of the directive is:
.float16 <0-n decimal numbers>
e.g.
.float16 12.0
.float16 0.23, 433.1, 0.06
The Arm alternative format is almost identical to the IEEE 754 format,
except that it doesn't encode for NaNs or Infinity (instead an exponent
of 0x1F represents a normalized number in the range 65536 to 131008).
The alternative format is documented in the reference manual:
https://static.docs.arm.com/ddi0487/db/DDI0487D_b_armv8_arm.pdf?_ga=2.72318806.49764181.1561632697-999473562.1560847439
Which format is used is controlled by the .float16_format <format>
directive, where if <format> = ieee, then use the IEEE 754
half-precision format else if <format> = alternative, then use the
Arm alternative format
Or the format can be set on the command line via the -mfp16-format
option that has a similar syntax. -mfp16-format=<ieee|alternative>.
This also fixes the format and it cannot be changed by any directives.
Once the format has been set (either by the command line option or a directive) it cannot be changed,
and any attempts to change it (i.e. with the float16_format directive) will result in a warning and the
line being ignored.
For ELF targets the appropriate EABI attribute will be written out at the end of assembling
if the format has been explicitly specified. If no format has been explicitly specified then no
EABI attributes will be written.
If the format is not explicitly specified then any float16 directives are encoding using the IEEE 754-2008
format by default until the format is fixed or changed with the float16_format directive.
gas * config/tc-arm.c (enum fp_16bit_format): Add enum to represent the 2 float16 encodings.
(md_atof): Set precision for float16 type.
(arm_is_largest_exponent_ok): Check for whether to encode with the IEEE or alternative
format.
(set_fp16_format): Parse a float16_format directive.
(arm_parse_fp16_opt): Parse the fp16-format command line option.
(aeabi_set_public_attributes): For ELF encode the FP16 format EABI attribute.
* config/tc-arm.h (TC_LARGEST_EXPONENT_IS_NORMAL): Macro that expands to
arm_is_largest_exponent_ok.
(arm_is_largest_exponent_ok): Add prototype for arm_is_largest_exponent_ok function.
* doc/c-arm.texi: Add documentation for .float16, .float16_format and -mfp16-format=
* testsuite/gas/arm/float16-bad.d: New test.
* testsuite/gas/arm/float16-bad.l: New test.
* testsuite/gas/arm/float16-bad.s: New test.
* testsuite/gas/arm/float16-be.d: New test.
* testsuite/gas/arm/float16-format-bad.d: New test.
* testsuite/gas/arm/float16-format-bad.l: New test.
* testsuite/gas/arm/float16-format-bad.s: New test.
* testsuite/gas/arm/float16-format-opt-bad.d: New test.
* testsuite/gas/arm/float16-format-opt-bad.l: New test.
* testsuite/gas/arm/float16-le.d: New test.
* testsuite/gas/arm/float16.s: New test.
* testsuite/gas/arm/float16-eabi-alternative-format.d: New test.
* testsuite/gas/arm/float16-eabi-ieee-format.d: New test.
* testsuite/gas/arm/float16-eabi-no-format.d: New test.
* testsuite/gas/arm/float16-eabi.s: New test.
* config/atof-ieee.c (H_PRECISION): Macro for precision of float16
type.
(atof_ieee): Set precision and exponent bits for encoding float16
types.
(gen_to_words): NaN and Infinity encoding for float16.
(ieee_md_atof): Set precision for encoding float16 type.
