This changes a couple of spots in remote.c to use gdb::byte_vector,
allowing for some cleanup removal.
ChangeLog
2018-05-25 Tom Tromey <tom@tromey.com>
* remote.c (remote_target::remote_file_get): Use
gdb::byte_vector.
(remote_target::remote_file_put): Likewise.
This removes cleanups from coff-pe-read.c, using std::string,
std::vector, and gdb::def_vector.
Tested by the buildbot, though I'm not sure these code paths are
exercised there.
ChangeLog
2018-05-25 Tom Tromey <tom@tromey.com>
* coff-pe-read.c (struct read_pe_section_data) <section_name>: Now
a std::string.
(get_pe_section_index, add_pe_exported_sym): Update.
(read_pe_exported_syms): Use gdb::def_vector.
This changes remove_prev_frame to use TRY/CATCH instead of a cleanup.
TRY/CATCH seemed appropriate here because the cleanup is only needed
in the case where an exception is thrown.
Tested by the buildbot.
ChangeLog
2018-05-25 Tom Tromey <tom@tromey.com>
* frame.c (remove_prev_frame): Remove.
(get_prev_frame_if_no_cycle): Use TRY/CATCH.
Our interpretation of the layout of floating-point general registers
(FGRs) in o32 MIPS/Linux core files is different from how the kernel
makes them, affecting the CP0 Status.FR=0 aka FP32 mode (we don't
currently support the CP0 Status.FR=1 aka FP64 mode with the o32 ABI).
In the FP32 mode pairs of consecutive even/odd-numbered 32-bit registers
are placed together as 64-bit values in even-indexed 64-bit slots
corresponding to the even index, leaving the odd-indexed 64-bit slots
unused. These 64-bit values are stored according to the endianness in
effect, which is how the MIPS II SDC1 instruction would store them.
It has always been like that with the Linux kernel for MIPS II and
higher ISA processors, which are the vast majority ever supported, as it
is indeed SDC1 that the kernel uses to store FGRs in a floating-point
context.
With MIPS I processors, which lack the SDC1 instruction, a layout that
we expect used to be used long ago, but it was corrected for consistency
with newer processors back in 2002, with `linux-mips.org' (LMO) commit
42533948caac ("Major pile of FP emulator changes."), the fix corrected
with LMO commit 849fa7a50dff ("R3k FPU ptrace() handling fixes."), and
then broken and fixed over and over again, until last time fixed with
commit 80cbfad79096 ("MIPS: Correct MIPS I FP context layout").
Consequently the values we see in FP32 core files or produce with the
`gcore' command are different from those obtained from the same FP
context of a live process, e.g. with a big-endian configuration these
live values:
(gdb) info registers float
f0: 0x4b5c6d7e flt: 14445950 dbl: 1.7446153562345001e-274
f1: 0x0718293a flt: 1.14473244e-34
f2: 0xc3d4e5f6 flt: -425.79657 dbl: -1.046160437414959e-233
f3: 0x8f90a1b2 flt: -1.42617791e-29
f4: 0x4c5d6e7f flt: 58046972 dbl: 1.1908587841220294e-269
f5: 0x08192a3b flt: 4.60914044e-34
f6: 0xc4d5e6f7 flt: -1711.21765 dbl: -6.2784661835068965e-306
f7: 0x8091a2b3 flt: -1.33745124e-38
f8: 0x45566778 flt: 3430.4668 dbl: 1.6530355595710607e-303
f9: 0x01122334 flt: 2.68412219e-38
f10: 0xcddeeff0 flt: -467533312 dbl: -2.1174864564135575e-262
f11: 0x899aabbc flt: -3.72356497e-33
f12: 0x46576879 flt: 13786.1182 dbl: 1.143296486773654e-298
f13: 0x02132435 flt: 1.08102453e-37
f14: 0xcedfe0f1 flt: -1.87803046e+09 dbl: -1.4399511533369862e-257
f15: 0x8a9bacbd flt: -1.4990934e-32
f16: 0x4758697a flt: 55401.4766 dbl: 7.8856820439568725e-294
f17: 0x03142536 flt: 4.3536007e-37
f18: 0xcfd0e1f2 flt: -7.00893696e+09 dbl: -9.7791926757340559e-253
f19: 0x8b9cadbe flt: -6.03504325e-32
f20: 0x48596a7b flt: 222633.922 dbl: 5.4255001483306113e-289
f21: 0x04152637 flt: 1.75324132e-36
f22: 0xc0d1e2f3 flt: -6.55895376 dbl: -6.6332401002310683e-248
f23: 0x8c9daebf flt: -2.42948516e-31
f24: 0x495a6b7c flt: 894647.75 dbl: 3.7244369058749787e-284
f25: 0x05162738 flt: 7.06016945e-36
f26: 0xc1d2e3f4 flt: -26.3613052 dbl: -4.4941535759306202e-243
f27: 0x8d9eafb0 flt: -9.77979703e-31
f28: 0x4a5b6c7d flt: 3595039.25 dbl: 2.5514593711161396e-279
f29: 0x06172839 flt: 2.84294945e-35
f30: 0xc2d3e4f5 flt: -105.947182 dbl: -3.035646690850097e-238
f31: 0x8e9fa0b1 flt: -3.93512664e-30
fcsr: 0x0
fir: 0xf30000
(gdb)
show up in a core file as these:
(gdb) info registers float
f0: 0x0718293a flt: 1.14473244e-34 dbl: nan
f1: 0x7ff80000 flt: nan
f2: 0x8f90a1b2 flt: -1.42617791e-29 dbl: nan
f3: 0x7ff80000 flt: nan
f4: 0x08192a3b flt: 4.60914044e-34 dbl: nan
f5: 0x7ff80000 flt: nan
f6: 0x8091a2b3 flt: -1.33745124e-38 dbl: nan
f7: 0x7ff80000 flt: nan
f8: 0x01122334 flt: 2.68412219e-38 dbl: nan
f9: 0x7ff80000 flt: nan
f10: 0x899aabbc flt: -3.72356497e-33 dbl: nan
f11: 0x7ff80000 flt: nan
f12: 0x02132435 flt: 1.08102453e-37 dbl: nan
f13: 0x7ff80000 flt: nan
f14: 0x8a9bacbd flt: -1.4990934e-32 dbl: nan
f15: 0x7ff80000 flt: nan
f16: 0x03142536 flt: 4.3536007e-37 dbl: nan
f17: 0x7ff80000 flt: nan
f18: 0x8b9cadbe flt: -6.03504325e-32 dbl: nan
f19: 0x7ff80000 flt: nan
f20: 0x04152637 flt: 1.75324132e-36 dbl: nan
f21: 0x7ff80000 flt: nan
f22: 0x8c9daebf flt: -2.42948516e-31 dbl: nan
f23: 0x7ff80000 flt: nan
f24: 0x05162738 flt: 7.06016945e-36 dbl: nan
f25: 0x7ff80000 flt: nan
f26: 0x8d9eafb0 flt: -9.77979703e-31 dbl: nan
f27: 0x7ff80000 flt: nan
f28: 0x06172839 flt: 2.84294945e-35 dbl: nan
f29: 0x7ff80000 flt: nan
f30: 0x8e9fa0b1 flt: -3.93512664e-30 dbl: nan
f31: 0x7ff80000 flt: nan
(gdb)
Notice how values from odd-numbered registers are shown in corresponding
even-numbered registers and how dummy 0x7ff80000 NaN values, which the
kernel places in unused slots, are reported in odd-numbered registers.
Correct our intepretation then, to match the kernel's. As it happens
the o32 FGR core file representation matches that used by the `ptrace'
PTRACE_GETFPREGS request, which means our 64-bit handlers can be readily
used, as they already correctly handle the differences between o32 FP32
mode vs n32/n64 representations.
Adjust comments accordingly throughout, in particular remove a reference
to the r3000/tx39 MIPS I processor peculiarity, long irrelevant.
Add a test case to verify correctness. Avoid GCC bugs and limitations
in the test case where possible; the test case still fails to build with
GCC 8 and the o32 FP64 mode (i.e. with `-mips32r2 -mfp64' options)
giving:
mips-fpregset-core.c: In function 'main':
mips-fpregset-core.c:66:3: error: inconsistent operand constraints in an 'asm'
asm (
^~~
(GCC PR target/85909), but that is not a concern for us as yet, because
as noted above we do not currently support the o32 FP64 mode anyway.
gdb/
* mips-linux-tdep.h (mips_supply_fpregset, mips_fill_fpregset):
Remove prototypes.
* mips-linux-nat.c (supply_fpregset): Always call
`mips64_supply_fpregset' rather than `mips_supply_fpregset'.
(fill_fpregset): Always call `mips64_fill_fpregset' rather than
`mips_fill_fpregset'.
* mips-linux-tdep.c (mips_supply_fpregset)
(mips_supply_fpregset_wrapper, mips_fill_fpregset)
(mips_fill_fpregset_wrapper): Remove functions.
(mips64_supply_fpregset, mips64_fill_fpregset): Update comments.
(mips_linux_fpregset): Remove variable.
(mips_linux_iterate_over_regset_sections): Use
`mips64_linux_fpregset' in place of `mips_linux_fpregset'.
(mips_linux_o32_sigframe_init): Remove comment.
gdb/testsuite/
* gdb.arch/mips-fpregset-core.exp: New test.
* gdb.arch/mips-fpregset-core.c: New test source.
The only reason remote_target::m_remote_state is a pointer is that
struct remote_state is incomplete when struct remote_target is
defined.
This commit thus moves struct remote_state (and its dependencies)
higher up and makes remote_target::m_remote_state an object instead of
a pointer.
gdb/ChangeLog:
2018-05-25 Pedro Alves <palves@redhat.com>
* remote.c (struct vCont_action_support, MAXTHREADLISTRESULTS)
(struct readahead_cache, struct packet_reg, struct
remote_arch_state, class remote_state): Move higher up in the
file.
(remote_target::m_remote_state): Now an object instead of a pointer.
(remote_target::get_remote_state): Adjust.
This patch regenerates a number of files that either were edited by
hand or not regenerated when s12z support was added to binutils.
bfd/
* Makefile.in: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
gas/
* po/POTFILES.in: Regenerate.
ld/
* po/BLD-POTFILES.in: Regenerate.
opcodes/
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
Warnings from configure tests aren't usually checked. gcc's
"visibility attribute not supported in this configuration" warning is
enabled by default so we don't need to add any warning flag except
-Werror.
* configure.ac (bfd_cv_hidden): Run test with -Werror in CFLAGS.
* configure: Regenerate.
The func_command function is used to emulate the dbx 'func' command.
However, finding a stack frame based on function name might be a useful
feature, and so the core of func_command is now split out into a
separate function.
gdb/ChangeLog:
* stack.c (select_and_print_frame): Delete.
(struct function_bounds): Move struct within function.
(func_command): Most content moved into new function
find_frame_for_function, use new function, print result, add
function comment.
(find_frame_for_function): New function, now returns a result.
iterate_over_block_arg_vars is a void function, so does
not return 1 or 0.
print_frame_arg_vars tells it prints on STREAM,
so pass STREAM in the cb_data, not gdb_stdout.
gdb/ChangeLog
2018-05-24 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* stack.c (iterate_over_block_arg_vars): Fix comment.
(print_frame_arg_vars): Pass stream in cb_data, not gdb_stdout.
This updates some help text in record.c to conform to GNU standards.
I also added a "Usage" line to "record save".
2018-04-29 Tom Tromey <tom@tromey.com>
* record.c (_initialize_record): Update help text.
This updates some help text in linux-fork.c to conform to GNU
standards.
2018-04-29 Tom Tromey <tom@tromey.com>
* linux-fork.c (_initialize_linux_fork): Update help text.
This updates the help text in record-btrace.c to conform to GNU
standards.
2018-04-29 Tom Tromey <tom@tromey.com>
* record-btrace.c (_initialize_record_btrace): Update help text.
This changes the help text of a couple of commands in tracepoint.c to
follow the GNU style.
ChangeLog
2018-04-29 Tom Tromey <tom@tromey.com>
* tracepoint.c (_initialize_tracepoint): Update help text.
testsuite/ChangeLog
2018-04-30 Tom Tromey <tom@tromey.com>
* gdb.trace/tfind.exp: Update help tests.
This changes some help text in disasm.c to follow the GNU style.
2018-04-29 Tom Tromey <tom@tromey.com>
* disasm.c (_initialize_disasm): Update help text.
This updates the usage text for the "jump" command to conform to the
GNU style.
2018-04-29 Tom Tromey <tom@tromey.com>
* infcmd.c (_initialize_infcmd): Update help text.
This updates some text in dcache.c to follow GNU standards.
Here, I found a couple of spots needing an update.
2018-04-29 Tom Tromey <tom@tromey.com>
* dcache.c (dcache_info_1): Update usage text.
(_initialize_dcache): Update help text.
This updates some help strings in the TUI to more closely follow GNU
standards. In this case I chose to reuse some existing "usage" macros
in the help text. Also, I found that XDBWIN_HEIGHT_USAGE is unused,
so I removed it.
ChangeLog
2018-04-29 Tom Tromey <tom@tromey.com>
* tui/tui-layout.c (_initialize_tui_layout): Update help text.
* tui/tui-win.c (WIN_HEIGHT_USAGE, FOCUS_USAGE): Update
(XDBWIN_HEIGHT_USAGE): Remove.
(_initialize_tui_win): Use macros. Update help text.
This changes memattr.c to use the GNU style for help strings.
2018-04-29 Tom Tromey <tom@tromey.com>
* memattr.c (_initialize_mem): Update help string.
This updates some help strings in corefile.c and gcore.c.
2018-04-27 Tom Tromey <tom@tromey.com>
* corefile.c (_initialize_core): Update help string.
* gcore.c (_initialize_gcore): Update help string.
This changes help strings in skip.c to follow the GNU style.
2018-04-27 Tom Tromey <tom@tromey.com>
* skip.c (_initialize_step_skip): Update help strings.
This changes inferior.c to add Usage lines for all commands, and to
change how "metasyntactic variables" are written to conform to GNU
style.
While doing this I noticed that the manual doesn't document the
argument to "info inferiors", so I've added that as well.
ChangeLog
2018-04-27 Tom Tromey <tom@tromey.com>
* inferior.c (initialize_inferiors): Update help strings.
doc/ChangeLog
2018-04-27 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Inferiors and Programs): Document argument to "info
inferiors".
PR gdb/23203 reports 'bt full' causing the currently selected frame to
change, this issue is fixed in this commit.
Add a new class scoped_restore_selected_frame that saves and restores
the selected frame. Make use of this in print_frame_local_vars to
restore the selected frame on exit.
gdb/ChangeLog:
PR gdb/23203
* frame.c
(scoped_restore_selected_frame::scoped_restore_selected_frame):
Define.
(scoped_restore_selected_frame::~scoped_restore_selected_frame):
Define.
* frame.h (class scoped_restore_selected_frame): New class.
* stack.c (print_frame_local_vars): Remove catching and rethrowing
of any exception, use scoped_restore_selected_frame to restore the
frame instead.
gdb/testsuite/ChangeLog:
PR gdb/23203
* gdb.base/bt-selected-frame.c: New file.
* gdb.base/bt-selected-frame.exp: New file.
* lib/gdb.exp (get_current_frame_number): New function.
Complementing commit 280ca31f4d ("Add test for fetching TLS from
core file") extend gdb.threads/tls-core.exp with an OS-generated dump
where supported.
This verifies not only that our core dump interpreter is consistent
with our producer, but that it matches the OS verified as well,
avoiding a possible case where our interpreter would be bug-compatible
with our producer but not the OS and it would go unnoticed in testing.
This results in:
PASS: gdb.threads/tls-core.exp: native: load core file
PASS: gdb.threads/tls-core.exp: native: print thread-local storage variable
PASS: gdb.threads/tls-core.exp: gcore: load core file
PASS: gdb.threads/tls-core.exp: gcore: print thread-local storage variable
with local testing and:
UNSUPPORTED: gdb.threads/tls-core.exp: native: load core file
UNSUPPORTED: gdb.threads/tls-core.exp: native: print thread-local storage variable
PASS: gdb.threads/tls-core.exp: gcore: load core file
PASS: gdb.threads/tls-core.exp: gcore: print thread-local storage variable
with remote testing, or for testing on ports that don't supports
cores.
gdb/testsuite/ChangeLog:
2018-05-24 Maciej W. Rozycki <macro@mips.com>
Pedro Alves <palves@redhat.com>
* gdb.threads/tls-core.c: Include <stdlib.h>
(thread_proc): Call `abort'.
* gdb.threads/tls-core.exp: Generate a core with core_find too.
(tls_core_test): New procedure, bits factored out from ...
(top level): ... here. Test both native cores and gcore cores.
Fixes:
In file included from ../../src/gdb/darwin-nat.c:63:0:
../../src/gdb/darwin-nat.h:28:8: error: 'virtual void darwin_nat_target::create_inferior(const char*, const string&, char**, int)' can be marked override [-Werror=suggest-override]
void create_inferior (const char *exec_file,
^
gdb/ChangeLog:
2018-05-24 Pedro Alves <palves@redhat.com>
* darwin-nat.h (darwin_nat_target::create_inferior): Mark with
override.
struct complaints now just holds a single enum value, so remove it and
symfile_complaint_book and replace it with a global variable.
gdb/ChangeLog
2018-05-23 Tom Tromey <tom@tromey.com>
* complaints.c (struct complaints): Remove.
(symfile_complaint_book): Remove.
(series): New global.
(complaint_internal): Update.
(clear_complaints): Update.
At this point, struct complain is just holds a key, a value, and a
"next" pointer to form a linked list. It's simpler to replace this
with an unordered map.
gdb/ChangeLog
2018-05-23 Tom Tromey <tom@tromey.com>
* complaints.c (counters): New global.
(struct complain): Remove.
(struct complaints) <root>: Remove.
(complaint_sentinel): Remove.
(symfile_complaint_book): Update.
(find_complaint) Remove.
(complaint_internal, clear_complaints): Update.
gdb/testsuite/ChangeLog
2018-05-23 Tom Tromey <tom@tromey.com>
* gdb.gdb/complaints.exp (test_initial_complaints): Simplify.
The file and line handling in complaints.c wasn't used once
internal_complaint was removed. This patch removes all the related
code.
gdb/ChangeLog
2018-05-23 Tom Tromey <tom@tromey.com>
* complaints.c (struct complain) <file, line>: Remove.
(find_complaint): Remove file, line parameters.
(complaint_internal): Update.
vcomplaint now has a single caller, so merge it with that caller.
gdb/ChangeLog
2018-05-23 Tom Tromey <tom@tromey.com>
* complaints.c (vcomplaint): Remove.
(complaint_internal) Merge in contents of vcomplaint.
Now that there's only a single reason for a complaint to be emitted,
this removes "struct explanation" and changes vcomplaint to emit the
desired messages directly.
gdb/ChangeLog
2018-05-23 Tom Tromey <tom@tromey.com>
* complaints.c (struct complaints) <explanation>: Remove.
(symfile_explanations): Remove.
(symfile_complaint_book): Update.
(vcomplaint): Update.
(struct explanation): Remove.
After the previous patch, the "noisy" parameter to clear_complaints is
no longer used, so this patch removes it.
gdb/ChangeLog
2018-05-23 Tom Tromey <tom@tromey.com>
* complaints.c (clear_complaints): Remove "noisy" parameter.
* complaints.h (clear_complaints): Update.
* symfile.c (syms_from_objfile_1, finish_new_objfile)
(reread_symbols): Update.
gdb/testsuite/ChangeLog
2018-05-23 Tom Tromey <tom@tromey.com>
* gdb.gdb/complaints.exp (test_empty_complaints): Update.
I couldn't find a way to get complaints to use a couple of cases, and
the difference between the actual printed output for these cases was
minimal anyway. So, this patch removes a couple of constants from
complaint_series, plus the associated code.
gdb/ChangeLog
2018-05-23 Tom Tromey <tom@tromey.com>
* complaints.c (enum complaint_series): Remove FIRST_MESSAGE,
SUBSEQUENT_MESSAGE.
(vcomplaint, clear_complaints): Update.
(symfile_explanations): Remove some messages.
gdb/testsuite/ChangeLog
2018-05-23 Tom Tromey <tom@tromey.com>
* gdb.gdb/complaints.exp (test_serial_complaints): Remove.
(test_short_complaints): Update.
I happened to notice that gdb has both complaint_internal and
internal_complaint. The latter is unused, so this patch removes it.
gdb/ChangeLog
2018-05-23 Tom Tromey <tom@tromey.com>
* complaints.c (internal_complaint): Remove.
* complaints.h (internal_complaint): Remove.
Currently, the function used by gdbserver to parse integers from
received File I/O commands will detect overflow and fail for any value
over 0xfffffff. Among other things, this has the effect of limiting
the file offsets for reading or writing to about 268MB which can be
insufficient for particularly large libraries.
This change allows the parsing of integers up to the true maximum
positive value of 0x7fffffff, increasing the file size limit to about
2GB.
gdb/gdbserver/ChangeLog:
2018-05-23 Erik Kurzinger <ekurzinger@nvidia.com>
PR server/23198
* hostio.c (require_int): Do not report overflow for integers
between 0xfffffff and 0x7fffffff.
This fixes gdb.base/remote.exp regressions caused by the previous
commit to the testcase, when tested with
--target_board=native-extended-gdbserver. For example:
...
show remote memory-write-packet-size
The memory-write-packet-size is 0 (default). Packets are limited to 16383 bytes.
(gdb) FAIL: gdb.base/remote.exp: write-packet default
...
With that board, GDB connects to GDBserver at gdb_start time, so GDB
is showing the actual remote/gdbserver packet size limits.
Fix it using the usual "disconnect" pattern. While at it, there's no
need to start GDB before compiling the testcase.
gdb/testsuite/ChangeLog:
2018-05-22 Pedro Alves <palves@redhat.com>
* gdb.base/remote.exp: Only gdb_start after compiling the
testcase. Issue "disconnect" before testing "set remote" command
defaults. Issue clean_restart before running to main.
Make `i' defined within `i387_collect_xsave' unsigned, removing a
`-Werror=strict-overflow' compilation error:
.../gdb/i387-tdep.c: In function 'void i387_collect_xsave(const regcache*, int, void*, int)':
.../gdb/i387-tdep.c:1348:1: error: assuming signed overflow does not occur when assuming that (X + c) < X is always false [-Werror=strict-overflow]
i387_collect_xsave (const struct regcache *regcache, int regnum,
^
cc1plus: all warnings being treated as errors
Makefile:1610: recipe for target 'i387-tdep.o' failed
make: *** [i387-tdep.o] Error 1
seen with GCC 5.4.0, a commit 8ee22052f6 ("gdb/x86: Handle kernels
using compact xsave format") regression. While `regnum' can be -1 on
entry to the function, to mean all registers, `i' is only used with
non-negative register numbers.
gdb/
* i387-tdep.c (i387_collect_xsave): Make `i' unsigned.
Fix an issue with `gdbserver' on big-endian n64 MIPS targets, where
$dspctl is 32-bit while the `ptrace' transfer data type is 64-bit.
Such register data is held in the low order 32 bits of the 64-bit data
quantity exchanged with the buffer used by `fetch_register' and
`store_register', however `supply_register' and `collect_register'
access the same data as a 32-bit quantity. Consequently the register is
presented and written as all-zeros held in the most-significant part of
the big-endian 64-bit data quantity represented in the buffer:
(gdb) info registers
zero at v0 v1
R0 0000000000000000 0000000000000001 0000000000000001 0000000000000000
a0 a1 a2 a3
R4 00000001200212b0 0000000000000000 0000000000000021 000000012001a260
a4 a5 a6 a7
R8 000000012001a260 0000000000000004 800000010c60c000 fffffffffffffff8
t0 t1 t2 t3
R12 0000000000000000 000000fff7edab68 0000000000000001 0000000000000000
s0 s1 s2 s3
R16 000000fff7ee2068 0000000120008b80 0000000000000000 0000000000000000
s4 s5 s6 s7
R20 000000000052e5c8 000000000052f008 0000000000000000 0000000000000000
t8 t9 k0 k1
R24 0000000000000000 00000001200027c0 0000000000000000 0000000000000000
gp sp s8 ra
R28 00000001200212b0 000000ffffffc850 000000ffffffc850 0000000120005ee8
status lo hi badvaddr
0000000000109cf3 0000000000943efe 000000000000000e 000000012001a008
cause pc
0000000000800024 0000000120005ee8
fcsr fir hi1 lo1
0e800000 00f30000 0000000000000000 0101010101010101
hi2 lo2 hi3 lo3
0202020202020202 0303030303030303 0404040404040404 0505050505050505
dspctl restart
00000000 0000000000000000
(gdb)
Correct this problem then by using the `mips_supply_register'
`mips_collect_register' accessors for 32-bit registers where the
`ptrace' data type is 64-bit. These accessors already operate on 32-bit
data quantities held in 64-bit containers:
(gdb) info registers
zero at v0 v1
R0 0000000000000000 0000000000000001 0000000000000001 0000000000000000
a0 a1 a2 a3
R4 00000001200212b0 0000000000000000 0000000000000021 000000012001a260
a4 a5 a6 a7
R8 000000012001a260 0000000000000004 800000010d82e900 fffffffffffffff8
t0 t1 t2 t3
R12 0000000000000000 000000fff7edab68 0000000000000001 0000000000000000
s0 s1 s2 s3
R16 000000fff7ee2068 0000000120008b80 0000000000000000 0000000000000000
s4 s5 s6 s7
R20 000000000052e5c8 000000000052f008 0000000000000000 0000000000000000
t8 t9 k0 k1
R24 0000000000000000 00000001200027c0 0000000000000000 0000000000000000
gp sp s8 ra
R28 00000001200212b0 000000ffffffc850 000000ffffffc850 0000000120005ee8
status lo hi badvaddr
0000000000109cf3 0000000000943efe 000000000000000e 000000012001a008
cause pc
0000000000800024 0000000120005ee8
fcsr fir hi1 lo1
0e800000 00f30000 0000000000000000 0101010101010101
hi2 lo2 hi3 lo3
0202020202020202 0303030303030303 0404040404040404 0505050505050505
dspctl restart
55aa33cc 0000000000000000
(gdb)
gdb/gdbserver/
* linux-mips-low.c [HAVE_PTRACE_GETREGS] (mips_collect_register)
(mips_supply_register): Move outside HAVE_PTRACE_GETREGS.
(mips_collect_ptrace_register, mips_supply_ptrace_register): New
functions.
(the_low_target): Wire them.
'struct remote_state' today contains per-connection state, however
there's only a single global instance of that type. In order to
support multiple connections, we must have one such object per
connection.
Thus this patch eliminates the 'remote_state' global in favor of
having a remote_state instance per remote_target instance.
The get_remote_state free function is eliminated as well, by making it
a remote_target method instead.
The patch then fixes the fallout by making all free functions that
refer to get_remote_state() directly or indirectly be methods of
remote_target too.
Likewise, remote-fileio.c and remote-notif.c routines are
parameterized with a remote_target pointer too, so they can call into
the right remote_target instance.
References to the global 'get_remote_state ()->remote_desc' to tell
whether the remote target is open (!= nullptr) must be replaced with
something else:
- Command implementations use a new get_current_remote_target free
function.
- remote_target::open_1 checks the exception type instead.
Finally, remote_target and extended_remote_target are made
heap-allocated targets. As with the earlier core target patches, it
still won't be possible to have more than one remote_target instance
in practice, but this puts us closer.
gdb/ChangeLog:
2018-05-22 Pedro Alves <palves@redhat.com>
* remote-fileio.c (remote_fileio_reply, remote_fileio_ioerror)
(remote_fileio_badfd, remote_fileio_return_errno)
(remote_fileio_return_success, remote_fileio_func_open)
(remote_fileio_func_open, remote_fileio_func_close)
(remote_fileio_func_read, remote_fileio_func_write)
(remote_fileio_func_lseek, remote_fileio_func_rename)
(remote_fileio_func_unlink, remote_fileio_func_stat)
(remote_fileio_func_fstat, remote_fileio_func_gettimeofday)
(remote_fileio_func_isatty, remote_fileio_func_system): Add
remote_target parameter.
(remote_fio_func_map) <func>: Add remote_target parameter.
(do_remote_fileio_request, remote_fileio_request):
* remote-fileio.h (remote_fileio_request):
* remote-notif.c (remote_notif_ack, remote_notif_parse, ): Add
remote_target parameter.
(remote_notif_process, handle_notification): Adjust to pass down
the remote.
(remote_notif_state_allocate): Add remote_target parameter. Save
it.
* remote-notif.h (struct remote_target): Forward declare.
(struct notif_client) <parse, ack, can_get_pending_events>: Add
remote_target parameter.
(struct remote_notif_state) <remote>: New field.
(remote_notif_ack, remote_notif_parse): Add remote_target
parameter.
(remote_notif_state_allocate, remote_notif_state_allocate): Add
remote_target parameter.
* remote.c (OPAQUETHREADBYTES, threadref, gdb_ext_thread_info)
(threads_listing_context, rmt_thread_action, protocol_feature)
(packet_reg, stop_reply, stop_reply_p, enum packet_support)
(packet_result, struct threads_listing_context, remote_state):
Move definitions and declarations higher up.
(remote_target) <~remote_target>: Declare.
(remote_download_command_source, remote_file_put, remote_file_get)
(remote_file_delete, remote_hostio_pread, remote_hostio_pwrite)
(remote_hostio_pread_vFile, remote_hostio_send_command)
(remote_hostio_set_filesystem, remote_hostio_open)
(remote_hostio_close, remote_hostio_unlink, remote_state)
(get_remote_state, get_remote_packet_size, get_memory_packet_size)
(get_memory_write_packet_size, get_memory_read_packet_size)
(append_pending_thread_resumptions, remote_detach_1)
(append_resumption, remote_resume_with_vcont)
(add_current_inferior_and_thread, wait_ns, wait_as)
(process_stop_reply, remote_notice_new_inferior)
(process_initial_stop_replies, remote_add_thread)
(btrace_sync_conf, remote_btrace_maybe_reopen)
(remove_new_fork_children, kill_new_fork_children)
(discard_pending_stop_replies, stop_reply_queue_length)
(check_pending_events_prevent_wildcard_vcont)
(discard_pending_stop_replies_in_queue, stop_reply)
(remote_notif_remove_queued_reply, stop_reply *queued_stop_reply)
(peek_stop_reply, remote_parse_stop_reply, remote_stop_ns)
(remote_interrupt_as, remote_interrupt_ns)
(remote_get_noisy_reply, remote_query_attached)
(remote_add_inferior, remote_current_thread, get_current_thread)
(set_thread, set_general_thread, set_continue_thread)
(set_general_process, write_ptid)
(remote_unpack_thread_info_response, remote_get_threadinfo)
(parse_threadlist_response, remote_get_threadlist)
(remote_threadlist_iterator, remote_get_threads_with_ql)
(remote_get_threads_with_qxfer)
(remote_get_threads_with_qthreadinfo, extended_remote_restart)
(get_offsets, remote_check_symbols, remote_supported_packet)
(remote_query_supported, remote_packet_size)
(remote_serial_quit_handler, remote_detach_pid)
(remote_vcont_probe, remote_resume_with_hc)
(send_interrupt_sequence, interrupt_query)
(remote_notif_get_pending_events, fetch_register_using_p)
(send_g_packet, process_g_packet, fetch_registers_using_g)
(store_register_using_P, store_registers_using_G)
(set_remote_traceframe, check_binary_download)
(remote_write_bytes_aux, remote_write_bytes, remote_read_bytes_1)
(remote_xfer_live_readonly_partial, remote_read_bytes)
(remote_send_printf, remote_flash_write, readchar)
(remote_serial_write, putpkt, putpkt_binary, skip_frame)
(read_frame, getpkt, getpkt_or_notif_sane_1, getpkt_sane)
(getpkt_or_notif_sane, remote_vkill, remote_kill_k)
(extended_remote_disable_randomization, extended_remote_run)
(send_environment_packet, extended_remote_environment_support)
(extended_remote_set_inferior_cwd, remote_write_qxfer)
(remote_read_qxfer, push_stop_reply, vcont_r_supported)
(packet_command): Now methods of ...
(remote_target): ... this class.
(m_remote_state) <remote_target>: New field.
(struct remote_state) <stop_reply_queue,
remote_async_inferior_event_token, wait_forever_enabled_p>: New
fields.
(remote_state::remote_state): Allocate stop_reply_queue.
(remote_state): Delete global.
(get_remote_state_raw): Delete.
(remote_target::get_remote_state): Allocate m_remote_state on
demand.
(get_current_remote_target): New.
(remote_ops, extended_remote_ops): Delete.
(wait_forever_enabled_p, remote_async_inferior_event_token):
Delete, moved to struct remote_state.
(remote_target::close): Delete self. Destruction bits split to
...
(remote_target::~remote_target): ... this.
(show_memory_packet_size): Adjust to use
get_current_remote_target.
(struct protocol_feature) <func>: Add remote_target parameter.
All callers adjusted.
(curr_quit_handler_target): New.
(remote_serial_quit_handler): Reimplement.
(remote_target::open_1): Adjust to use get_current_remote_target.
Heap-allocate remote_target/extended_remote_target instances.
(vcont_builder::vcont_builder): Add remote_target parameter, and
save it in m_remote. All callers adjusted.
(vcont_builder::m_remote): New field.
(vcont_builder::restart, vcont_builder::flush)
(vcont_builder::push_action): Use it.
(remote_target::commit_resume): Use it.
(struct queue_iter_param) <remote>: New field.
(remote_target::remove_new_fork_children): Fill in 'remote' field.
(check_pending_event_prevents_wildcard_vcont_callback_data): New.
(check_pending_event_prevents_wildcard_vcont_callback)
(remote_target::check_pending_events_prevent_wildcard_vcont)
(remote_target::discard_pending_stop_replies)
(remote_target::discard_pending_stop_replies_in_queue)
(remote_target::remote_notif_remove_queued_reply): Fill in
'remote' field.
(remote_notif_get_pending_events): New.
(remote_target::readchar, remote_target::remote_serial_write):
Save/restore curr_quit_handler_target.
(putpkt): New.
(kill_new_fork_children): Fill in 'remote' field.
(packet_command): Use get_current_remote_target, defer to
remote_target method of same name.
(scoped_remote_fd::scoped_remote_fd): Add 'remote_target'
parameter, and save it in m_remote. All callers adjusted.
(scoped_remote_fd::release): Use m_remote.
(scoped_remote_fd::m_remote): New field.
(remote_file_put, remote_file_get, remote_file_delete): Use
get_current_remote_target, defer to remote_target method of same
name.
(remote_btrace_reset): Add remote_state paremeter. Update all
callers.
(remote_async_inferior_event_handler). Pass down 'data'.
(remote_new_objfile): Use get_current_remote_target.
(remote_target::vcont_r_supported): New.
(set_range_stepping): Use get_current_remote_target and
remote_target::vcont_r_supported.
(_initialize_remote): Don't allocate 'remote_state' and
'stop_reply_queue' globals.
* remote.h (struct remote_target): Forward declare.
(getpkt, putpkt, remote_notif_get_pending_events): Add
'remote_target' parameter.
gdb/ChangeLog:
2018-05-22 Pedro Alves <palves@redhat.com>
* remote.c (vcont_builder): Now a class. Make all data members
private.
(vcont_builder) <vcont_builder, restart, flush, push_action>:
Declare methods.
(vcont_builder_restart): Rename to ...
(vcont_builder::restart): ... this.
(vcont_builder_flush): Rename to ...
(vcont_builder::flush): ... this.
(vcont_builder_push_action): Rename to ...
(vcont_builder::push_action): ... this.
(remote_target::commit_resume): Adjust.
Currently "show remote memory-write-packet-size" says that the packet
size is limited to whatever is stored in the remote_state global, even
if not connected to a target.
When we get to support multiple instances of remote targets, there
won't be a remote_state global anymore, so that must be replaced by
something else.
Since it doesn't make sense to print the limit of the packet size of a
non-existing connection, this patch makes us say that the limit will
be further reduced when we connect.
The text is taken from the command's online help, which says:
"The actual limit is further reduced dependent on the target."
Note that a value of "0" is special, as per "help set remote
memory-write-packet-size":
~~~
Specify the number of bytes in a packet or 0 (zero) for the
default packet size.
~~~
I've tweaked "show remote memory-write-packet-size" to include
"(default)" in the output in that case, like this:
(gdb) show remote memory-write-packet-size
The memory-write-packet-size is 0 (default). The actual limit will be further reduced dependent on the target.
While working on this, I noticed that an explicit "set remote
write-packet-size 0" does not makes GDB go back to the exact same
state as the default state when GDB starts up:
(gdb) show remote memory-write-packet-size
The memory-write-packet-size is 0. [...]
^^
(gdb) set remote memory-write-packet-size 0
(gdb) show remote memory-write-packet-size
The memory-write-packet-size is 16384. [...]
^^^^^
The "16384" number comes from DEFAULT_MAX_MEMORY_PACKET_SIZE.
This happens because git commit a5c0808e22 ("gdb: remove packet size
limit") at
<https://sourceware.org/ml/gdb-patches/2015-08/msg00743.html>, added
this:
/* So that the query shows the correct value. */
if (size <= 0)
size = DEFAULT_MAX_MEMORY_PACKET_SIZE;
to set_memory_packet_size, but despite what the comment suggests, that
also has the side-effect of recording DEFAULT_MAX_MEMORY_PACKET_SIZE
in config->size.
Finally, DEFAULT_MAX_MEMORY_PACKET_SIZE only makes sense for "set
remote memory-write-packet-size fixed", so I've renamed it
accordingly, to make it a little bit clearer.
gdb/ChangeLog:
2018-05-22 Pedro Alves <palves@redhat.com>
* remote.c (DEFAULT_MAX_MEMORY_PACKET_SIZE): Rename to ...
(DEFAULT_MAX_MEMORY_PACKET_SIZE_FIXED): ... this.
(get_fixed_memory_packet_size): New.
(get_memory_packet_size): Use it.
(set_memory_packet_size): Don't override the config size with
DEFAULT_MAX_MEMORY_PACKET_SIZE.
(show_memory_packet_size): Use get_fixed_memory_packet_size.
Don't refer to get_memory_packet_size if not connected to a remote
target. Show "(default)" if configured size is 0.
gdb/testsuite/ChangeLog:
2018-05-22 Pedro Alves <palves@redhat.com>
* gdb.base/remote.exp: Adjust expected output of "show remote
memory-write-packet-size". Add tests for "set remote
memory-write-packet-size 0" and "set remote
memory-write-packet-size fixed/limit".
This helps because discard_pending_stop_replies will later become a
method of remote_target. Otherwise, when we have multiple instances
of remote_target, we'd have to make discard_pending_stop_replies find
the inferior's target_ops, and upcast it to remote_target (if indeed a
remote) to find the pending stop replies queue to clear.
gdb/ChangeLog:
2018-05-22 Pedro Alves <palves@redhat.com>
* remote.c (remote_target::mourn_inferior): Move
discard_pending_stop_replies call here from ...
(_initialize_remote): ... here.
The set_general_process call in compare_sections_command isn't
actually needed. remote_target::verify_memory and
remote_target::xfer_partial already handle making sure the remote is
pointing at the right process or thread.
Getting this out of the way helps a bit with further elimination of
the remote_state global, because we have to handle the case of a user
invoking the command even if not connect to a remote target.
gdb/ChangeLog:
2018-05-22 Pedro Alves <palves@redhat.com>
* remote.c (compare_section_command): Remove set_general_process
call.
The previous patch made the map store pointers to remote_arch_state
instead of objects directly, simply because struct remote_arch_state
is still incomplete where struct remote_state is declared. This patch
thus moves the remote_arch_state declaration higher up in the file,
and makes the map store remote_arch_state objects directly instead of
pointers to objects.
gdb/ChangeLog:
2018-05-22 Pedro Alves <palves@redhat.com>
* remote.c (struct packet_reg, struct remote_arch_state):
Move higher up in the file.
(remote_state) <m_arch_states>: Store remote_arch_state values
instead of remote_arch_state pointers.
(remote_state::get_remote_arch_state): Adjust.
Currently, we associate gdbarch-related remote protocol state on a
per-gdbarch data object. Things like the size of the g/G packet, and
the max remote packet size. If we'll support being connected to
different remote servers at the same time, then we need to cope with
each having their own packet sizes, even if they are each debugging
programs of the same architecture. I.e., a single instance of
remote_arch_state per arch is not sufficient.
This patch moves the remote_arch_state object to a map of
gdbarch-to-remote_arch_state saved in the remote_state structure.
Usually there will only be one entry in the map, though we may see
more with stubs that support multi-process and/or archs with multiple
ABIs (e.g, one remote_arch_state for 64-bit inferiors and another for
32-bit inferiors).
gdb/ChangeLog:
2018-05-22 Pedro Alves <palves@redhat.com>
* remote.c: Include <unordered_map>.
(remote_state): Now a class.
(remote_state) <get_remote_arch_state>: Declare method.
<get_remote_arch_state>: New field.
(remote_arch_state) <remote_arch_state>: Declare ctor.
<regs>: Now a unique_ptr.
(remote_gdbarch_data_handle): Delete.
(get_remote_arch_state): Delete.
(remote_state::get_remote_arch_state): New.
(get_remote_state): Adjust to call remote_state's
get_remote_arch_state method.
(init_remote_state): Delete, bits factored out to ...
(remote_arch_state::remote_arch_state): ... this new method.
(get_remote_packet_size, get_memory_packet_size)
(process_g_packet, remote_target::fetch_registers)
(remote_target::prepare_to_store, store_registers_using_G)
(remote_target::store_registers, remote_target::get_trace_status):
Adjust to call remote_state's method.
(_initialize_remote): Remove reference to
remote_gdbarch_data_handle.
The idea here is eliminate the get_remote_state calls from within
readahead_cache_invalidate, readahead_cache_invalidate_fd,
remote_hostio_pread_from_cache by making those functions be class
methods instead. Later on we'll have one readahead_cache instance per
remote connection, and this change makes that easier.
gdb/ChangeLog:
2018-05-22 Pedro Alves <palves@redhat.com>
* remote.c (struct readahead_cache) <invalidate, invalidate_fd,
pread>: New method declarations.
(remote_target::open_1): Adjust.
(readahead_cache_invalidate): Rename to ...
(readahead_cache::invalidate): ... this, and adjust to be a class
method.
(readahead_cache_invalidate_fd): Rename to ...
(readahead_cache::invalidate_fd): ... this, and adjust to be a
class method.
(remote_hostio_pwrite): Adjust.
(remote_hostio_pread_from_cache): Rename to ...
(readahead_cache::pread): ... this, and adjust to be a class
method.
(remote_hostio_close): Adjust.
