This removes the SHORT_FIRST_MESSAGE case from complaints, leaving
only a single case. This allows for the removal of the last argument
to clear_complaints, and also simplifies complaint_internal, removing
an extra allocation in the process.
After this, the "./gdb -iex 'set complaint 1' -nx ./gdb" example will
show:
Reading symbols from ./gdb...
During symbol reading: .debug_ranges entry has start address of zero [in module /home/tromey/gdb/build/gdb/gdb]
During symbol reading: DW_AT_low_pc 0x0 is zero for DIE at 0x17116c1 [in module /home/tromey/gdb/build/gdb/gdb]
During symbol reading: .debug_line address at offset 0xa22f5 is 0 [in module /home/tromey/gdb/build/gdb/gdb]
During symbol reading: unsupported tag: 'DW_TAG_unspecified_type'
During symbol reading: const value length mismatch for 'std::ratio<1, 1000000000>::num', got 8, expected 0
This is a bit wordier but, I think, a bit more clear, as the form of
the message no longer depends on precisely when it was emitted. In
particular if you compare to the output from the 'Clean up "Reading
symbols" output' patch, you can see that earlier gdb would switch from
the prefix-less form to the "During symbol reading" form at a point
that is meaningless to the user (specifically, after psymtab reading
is done and gdb tries to expand a CU).
2018-10-04 Tom Tromey <tom@tromey.com>
* symfile.c (syms_from_objfile_1, finish_new_objfile)
(reread_symbols): Update.
* complaints.h (clear_complaints): Remove argument.
* complaints.c (enum complaint_series): Remove.
(series): Remove global.
(complaint_internal): Update.
(clear_complaints): Remove argument.
gdb/testsuite/ChangeLog
2018-10-04 Tom Tromey <tom@tromey.com>
* gdb.cp/maint.exp (test_invalid_name): Update expected output.
* gdb.gdb/complaints.exp (test_short_complaints): Remove.
(test_initial_complaints, test_empty_complaints): Update.
* gdb.dwarf2/dw2-stack-boundary.exp: Update.
This patch is another attempt to fix PR cli/19551. Unlike my previous
attempt, it doesn't print progress. Instead, it just changes some
messages and adds newlines to make the output a bit nicer.
It also removes the "done." text that was previously emitted. The
idea here is that it is obvious when gdb is done reading debug info,
as it starts then doing something else; and that while this message
did not provide much benefit to users, it did make it harder to make
the output clean.
After this change the output from "./gdb -iex 'set complaint 1' -nx ./gdb"
reads:
Reading symbols from ./gdb...
.debug_ranges entry has start address of zero [in module /home/tromey/gdb/build/gdb/gdb]
DW_AT_low_pc 0x0 is zero for DIE at 0x17116c1 [in module /home/tromey/gdb/build/gdb/gdb]
.debug_line address at offset 0xa22f5 is 0 [in module /home/tromey/gdb/build/gdb/gdb]
During symbol reading, unsupported tag: 'DW_TAG_unspecified_type'.
During symbol reading, const value length mismatch for 'std::ratio<1, 1000000000>::num', got 8, expected 0.
gdb/ChangeLog
2018-10-04 Tom Tromey <tom@tromey.com>
PR cli/19551:
* symfile.c (symbol_file_add_with_addrs): Update output.
* psymtab.c (require_partial_symbols): Update output.
gdb/testsuite/ChangeLog
2018-10-04 Tom Tromey <tom@tromey.com>
PR cli/19551:
* lib/mi-support.exp (mi_gdb_file_cmd): Update.
* lib/gdb.exp (gdb_file_cmd): Update.
* gdb.stabs/weird.exp (print_weird_var): Update.
* gdb.server/solib-list.exp: Update.
* gdb.multi/remove-inferiors.exp (test_remove_inferiors): Update.
* gdb.mi/mi-cli.exp: Update.
* gdb.linespec/linespec.exp: Update.
* gdb.dwarf2/dw2-stack-boundary.exp: Update.
* gdb.dwarf2/dw2-objfile-overlap.exp: Update.
* gdb.cp/cp-relocate.exp: Update.
* gdb.base/sym-file.exp: Update.
* gdb.base/relocate.exp: Update.
* gdb.base/readnever.exp: Update.
* gdb.base/print-symbol-loading.exp (test_load_core): Update.
* gdb.base/kill-detach-inferiors-cmd.exp: Update.
* gdb.base/dbx.exp (gdb_file_cmd): Update.
* gdb.base/code_elim.exp: Update.
* gdb.base/break-unload-file.exp (test_break): Update.
* gdb.base/break-interp.exp (test_attach_gdb): Update.
* gdb.base/break-idempotent.exp (force_breakpoint_re_set):
Update.
* gdb.base/attach.exp (do_attach_tests): Update.
* gdb.base/sepdebug.exp: Update.
* gdb.python/py-section-script.exp: Update.
Currently complaints are not always printed with a newline. For
example, when I run gdb on itself, I see output like:
(gdb) set complaints 5
(gdb) file ./gdb/gdb
Reading symbols from ./gdb/gdb...DW_AT_low_pc 0x0 is zero for DIE at 0x437dd4 [in module /home/tromey/gdb/build/gdb/gdb]....debug_line address at offset 0x21bf9 is 0 [in module /home/tromey/gdb/build/gdb/gdb]...DW_AT_low_pc 0x0 is zero for DIE at 0x5a85dd [in module /home/tromey/gdb/build/gdb/gdb]....debug_line address at offset 0x2dc2d is 0 [in module /home/tromey/gdb/build/gdb/gdb]...DW_AT_low_pc 0x0 is zero for DIE at 0xab6033 [in module /home/tromey/gdb/build/gdb/gdb]....debug_line address at offset 0x4f683 is 0 [in module /home/tromey/gdb/build/gdb/gdb]...DW_AT_low_pc 0x0 is zero for DIE at 0x10028f0 [in module /home/tromey/gdb/build/gdb/gdb]....debug_line address at offset 0x75edf is 0 [in module /home/tromey/gdb/build/gdb/gdb]...DW_AT_low_pc 0x0 is zero for DIE at 0x1021364 [in module /home/tromey/gdb/build/gdb/gdb]....debug_line address at offset 0x76f62 is 0 [in module /home/tromey/gdb/build/gdb/gdb]...done.
That's one very long line. I find it quite difficult to read that,
and I thought it would be better with some newlines, which is what
this patch does. Now the output looks like:
(gdb) file ./gdb
Reading symbols from ./gdb...
DW_AT_low_pc 0x0 is zero for DIE at 0x437dd4 [in module /home/tromey/gdb/build/gdb/gdb]
.debug_line address at offset 0x21bf9 is 0 [in module /home/tromey/gdb/build/gdb/gdb]
DW_AT_low_pc 0x0 is zero for DIE at 0x5a85dd [in module /home/tromey/gdb/build/gdb/gdb]
.debug_line address at offset 0x2dc2d is 0 [in module /home/tromey/gdb/build/gdb/gdb]
done.
gdb/ChangeLog
2018-10-04 Tom Tromey <tom@tromey.com>
PR cli/22234:
* complaints.c: Emit \n.
gdb/testsuite/ChangeLog
2018-10-04 Tom Tromey <tom@tromey.com>
PR cli/22234:
* gdb.dwarf2/dw2-stack-boundary.exp: Update expected output.
* gdb.gdb/complaints.exp (test_short_complaints): Update expected
output.
While re-testing the complaint series, I saw some unresolved tests in
attach.exp. In particular, the tests were failing because the pager
was active.
This is partly a new problem, introduced because that series changes
some prints from unfiltered to filtered. However, it is also a latent
bug, which you can see by shrinking your window very small and then
running the test.
This patch avoids the problem by passing -quiet to gdb and arranging
to set the window height and width in one other test.
Arguably instead of -quiet we should disable the pager during gdb's
welcome message. I can do that if it seems desirable; but meanwhile
this patch is safe.
gdb/testsuite/ChangeLog
2018-10-04 Tom Tromey <tom@tromey.com>
* gdb.base/attach.exp (test_command_line_attach_run): Use -quiet;
set width and height to 0.
(test_command_line_attach_run): Use -quiet.
As reported by Jan here:
https://sourceware.org/ml/gdb-patches/2018-09/msg00831.html
the check that sets the number of available registers is backwards.
gdb/testsuite/ChangeLog:
* gdb.arch/i386-avx512.exp: Fix setting of nr_regs based on
is_amd64_regs_target.
Add Aarch64 test to check register values of a previous frame
can be shown correctly across a signal.
gdb/testsuite/ChangeLog:
* gdb.arch/aarch64-sighandler-regs.c: New test.
* gdb.arch/aarch64-sighandler-regs.exp: New file.
* lib/gdb.exp (skip_aarch64_sve_tests): New proc.
Commit
c221b2f Testsuite: Add gdb_can_simple_compile
changed the source file name extension of the test program from .s to .c
resulting in compile fails. This, in turn, causes is_amd64_regs_target
checks to fail. In gdb.btrace/tailcall.exp and others, this causes the
wrong source file to be picked and the test to fail on 64-bit targets.
Change the test source from an assembly program to a C program using
inline assembly.
testsuite/
* lib/gdb.exp (is_amd64_regs_target): Change assembly to C inline
assembly.
The 'frame' command, and thanks to code reuse the 'info frame' and
'select-frame' commands, currently have an overloaded mechanism for
selecting a frame.
These commands take one or two parameters, if it's one parameter then
we first try to use the parameter as an integer to select a frame by
level (or depth in the stack). If that fails then we treat the
parameter as an address and try to select a stack frame by
stack-address. If we still have not selected a stack frame, or we
initially had two parameters, then GDB allows the user to view a stack
frame that is not part of the current backtrace. Internally, a new
frame is created with the given stack and pc addresses, and this is
shown to the user.
The result of this is that a typo by the user, entering the wrong stack
frame level for example, can result in a brand new frame being viewed
rather than an error.
The purpose of this commit is to remove this overloading, while still
offering the same functionality through some new sub-commands. By
making the default behaviour of 'frame' (and friends) be to select a
stack frame by level index, it is hoped that enough
backwards-compatibility is maintained that users will not be overly
inconvenienced.
The 'frame', 'select-frame', and 'info frame' commands now all take a
frame specification string as an argument, this string can be any of the
following:
(1) An integer. This is treated as a frame level. If a frame for
that level does not exist then the user gets an error.
(2) A string like 'level <LEVEL>', where <LEVEL> is a frame level
as in option (1) above.
(3) A string like 'address <STACK-ADDRESS>', where <STACK-ADDRESS>
is a stack-frame address. If there is no frame for this address
then the user gets an error.
(4) A string like 'function <NAME>', where <NAME> is a function name,
the inner most frame for function <NAME> is selected. If there is no
frame for function <NAME> then the user gets an error.
(5) A string like 'view <STACK-ADDRESS>', this views a new frame
with stack address <STACK-ADDRESS>.
(6) A string like 'view <STACK-ADDRESS> <PC-ADDRESS>', this views
a new frame with stack address <STACK-ADDRESS> and the pc <PC-ADDRESS>.
This change assumes that the most common use of the commands like
'frame' is to select a frame by frame level, it is for this reason
that this is the behaviour that is kept for backwards compatibility.
Any of the alternative behaviours, which are assumed to be less used,
now require a change in user behaviour.
The MI command '-stack-select-frame' has not been changed. This
ensures that we maintain backwards compatibility for existing
frontends.
gdb/ChangeLog:
(NEWS): Mention changes to frame related commands.
* cli/cli-decode.c (add_cmd_suppress_notification): New function.
(add_prefix_cmd_suppress_notification): New function.
(add_com_suppress_notification): Call
add_cmd_suppress_notification.
* command.h (add_cmd_suppress_notification): Declare.
(add_prefix_cmd_suppress_notification): Declare.
* mi/mi-cmd-stack.c: Add 'safe-ctype.h' include.
(parse_frame_specification): Moved from stack.c, with
simplification to handle a single argument.
(mi_cmd_stack_select_frame): Use parse_frame_specification, the
switch to the selected frame. Add a header comment.
* stack.c: Remove 'safe-ctype.h' include.
(find_frame_for_function): Add declaration.
(find_frame_for_address): New function.
(parse_frame_specification): Moved into mi/mi-cmd-stack.c.
(frame_selection_by_function_completer): New function.
(info_frame_command): Rename to...
(info_frame_command_core): ...this, and update parameter types.
(select_frame_command): Rename to...
(select_frame_command_core): ...this, and update parameter types.
(frame_command): Rename to...
(frame_command_core): ...this, and update parameter types.
(class frame_command_helper): New class to wrap implementations of
frame related sub-commands.
(frame_apply_cmd_list): New static global.
(frame_cmd_list): Make static.
(select_frame_cmd_list): New global for sub-commands.
(info_frame_cmd_list): New global for sub-commands.
(_initialize_stack): Register sub-commands for 'frame',
'select-frame', and 'info frame'. Update 'frame apply' commands
to use frame_apply_cmd_list. Move function local static
frame_apply_list to file static frame_apply_cmd_list for
consistency.
* stack.h (select_frame_command): Delete declarationn.
(select_frame_for_mi): Declare new function.
gdb/doc/ChangeLog:
* gdb.texinfo (Frames): Rewrite the description of 'frame number'
to highlight that the number is also the frame's level.
(Selection): Rewrite documentation for 'frame' and 'select-frame'
commands.
(Frame Info): Rewrite documentation for 'info frame' command.
gdb/testsuite/ChangeLog:
* gdb.base/frame-selection.exp: New file.
* gdb.base/frame-selection.c: New file.
It is possible for the created thread to reach the breakpoint before
the main thread has set errno to 23.
Prevent this using a pthread barrier.
* gdb.threads/check-libthread-db.c (thread_routine): Use a
pthread barrier.
(main): Likewise.
This commit improves the prologue scanning stack unwinder, to better
support AUIPC, LUI, and more variants of ADD and ADDI.
This allows unwinding over frames containing large local variables,
where the frame size does not fit into a single instruction immediate,
and is first loaded into a temporary register, before being added to
the stack pointer.
A new test is added that tests this behaviour. As there's nothing
truely RiscV specific about this test I've added it into gdb.base, but
as this depends on target specific code to perform the unwind it is
possible that some targets might fail this new test.
gdb/ChangeLog:
* riscv-tdep.c (riscv_insn::decode): Decode c.lui.
(riscv_scan_prologue): Split handling of AUIPC, LUI, ADD, ADDI,
and NOP.
gdb/testsuite/ChangeLog:
* gdb.base/large-frame-1.c: New file.
* gdb.base/large-frame-2.c: New file.
* gdb.base/large-frame.exp: New file.
* gdb.base/large-frame.h: New file.
When opening a BFD for update, as gdb --write does, modifications to
anything but the contents of sections is restricted.
Do not try to write back any ELF headers in this case.
bfd/ChangeLog
2018-09-24 Jozef Lawrynowicz <jozef.l@mittosystems.com>
PR gdb/20948
* elf.c (_bfd_elf_write_object_contents): Return from function
early if abfd->direction == both_direction.
gdb/testsuite/ChangeLog
2018-09-24 Jozef Lawrynowicz <jozef.l@mittosystems.com>
PR gdb/20948
* gdb.base/write_mem.exp: New test.
* gdb.base/write_mem.c: Likewise.
A convention in the Python layer is that raising a gdb.GdbError will
not print the Python stack -- instead the exception is treated as any
other gdb exception.
PR python/18852 asks that this treatment be extended the the
get_set_value method of gdb.Parameter. This makes sense, because it
lets Python-created parameters act like gdb parameters.
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/18852:
* python/py-param.c (get_set_value): Use gdbpy_handle_exception.
gdb/doc/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/18852:
* python.texi (Parameters In Python): Document exception behavior
of get_set_string.
gdb/testsuite/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/18852:
* gdb.python/py-parameter.exp: Add test for parameter that throws
on "set".
typy_template_argument did not check if the template argument was
non-negative. A negative value could cause a gdb crash.
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/17284:
* python/py-type.c (typy_template_argument): Check for negative
argument number.
gdb/testsuite/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/17284:
* gdb.python/py-template.exp (test_template_arg): Add test for
negative template argument number.
PR python/14062 points out that errors coming from the gdb.post_event
callback are not reported. This can make it hard to understand why
your Python code in gdb isn't working.
Because users have control over whether exceptions are printed at all,
it seems good to simply have post_event report errors in the usual
way.
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/14062:
* python/python.c (gdbpy_run_events): Do not ignore exceptions.
gdb/testsuite/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/14062:
* gdb.python/python.exp: Add test for post_event error.
PR python/18170 questions why it's not possible to convert a pointer
value to a Python int.
Digging a bit shows that the Python 2.7 int() constructor will happily
return a long in some cases. And, it seems gdb already understands
this in other places -- this is what gdb_py_object_from_longest
handles.
So, this patch simply extends valpy_int to allow pointer conversions,
as valpy_long does.
gdb/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/18170:
* python/py-value.c (valpy_int): Allow conversion from pointer
type.
gdb/testsuite/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/18170:
* gdb.python/py-value.exp (test_value_numeric_ops): Add tests to
convert pointers to int and long.
PR python/20126 points out that sometimes the conversion of a
gdb.Value can result in a negative Python integer. This happens
because valpy_int does not examine the signedness of the value's type.
gdb/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/20126:
* python/py-value.c (valpy_int): Respect type sign.
gdb/testsuite/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/20126:
* gdb.python/py-value.exp (test_value_numeric_ops): Add
signed-ness conversion tests.
PR python/18352 points out that the gdb Python code can't convert an
integer-valued gdb.Value to a Python float. While writing the test I
noticed that, similarly, converting integer gdb.Values to float does
not work. However, all of these cases seem reasonable.
gdb/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/18352;
* python/py-value.c (valpy_float): Allow conversions from int or
char.
(valpy_int, valpy_long): Allow conversions from float.
gdb/testsuite/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/18352;
* gdb.python/py-value.exp (test_float_conversion): New proc.
Use it.
I was looking at GDB testcase results for arm-eabi target with qemu and
noticed that register groups returned by the qemu can have '_' in the
name e.g. 'cp_regs'. The reggroups.exp fails to recognize that as group
name. Fixed by adding '_' in the pattern.
2018-09-20 Hafiz Abid Qadeer <abidh@codesourcery.com>
gdb.base/reggroups.exp (fetch_reggroups): Add '_' in match pattern.
When evaluating Fortran expressions such as the following:
print truth_table(1,1) .OR. truth_table(2,1)
where truth_table(1,1) evaluates to true, the debugger would report that
it could not perform substring operations on this type. This patch
addresses this issue.
Investigation revealed that EVAL_SKIP was not being handled correctly
for all types serviced by the OP_F77_UNDETERMINED_ARGLIST case in
evaluate_subexp_standard. While skipping an undetermined argument list
the type is resolved to be an integer (as this is what evaluate_subexp
returns when skipping) and so it was not possible to delegate to the
appropriate case (e.g. array, function call).
The solution implemented here updates OP_VAR_VALUE to return correct
type information when skipping. This way OP_F77_UNDETERMINED_ARGLIST
can delegate the skipping to the appropriate case or routine, which
should know how to skip/evaluate the type in question.
koenig.exp was updated to include a testcase which exercises the
modified skip logic in OP_VAR_VALUE, as it falls through from
OP_ADL_FUNC.
This patch has been tested for regressions with GCC 7.3 on aarch64,
ppc64le and x86_64.
gdb/ChangeLog:
* eval.c (skip_undetermined_arglist): Skip argument list helper.
(evaluate_subexp_standard): Return a dummy type when
honoring EVAL_SKIP in OP_VAR_VALUE and handle skipping in the
OP_F77_UNDETERMINED_ARGLIST case.
* expression.h (enum noside): Update comment.
gdb/testsuite/ChangeLog:
* gdb.cp/koenig.exp: Extend to test logical short circuiting.
* gdb.fortran/short-circuit-argument-list.exp: New file.
* gdb.fortran/short-circuit-argument-list.f90: New test.
Another case of incomplete regexp. The problem is very similar to the
one happening with gdb.arch/amd64-invalid-stack-middle.exp.
The output when GDB is compiled with "--enable-targets" is:
(gdb) interpreter-exec mi "-stack-list-frames"
^done,stack=[frame={level="0",addr="0x00000000004005e7",func="func2",arch="i386:x86-64"}]
While the output when "--enable-targets" is not specified is:
(gdb) interpreter-exec mi "-stack-list-frames"
^done,stack=[frame={level="0",addr="0x00000000004005e7",func="func2"}]
The fix is, again, to extend the current regexp and expect for the
optional "arch=" part. With this patch, the test now passes on both
scenarios.
OK?
gdb/testsuite/ChangeLog:
2018-09-18 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.arch/amd64-invalid-stack-top.exp: Expect optional
"arch=" keyword when executing "-stack-list-frames".
While regression-testing GDB on Fedora Rawhide, I saw the following
output when running gdb.arch/amd64-invalid-stack-middle.exp's
"-stack-list-frames" test:
(gdb) interpreter-exec mi "-stack-list-frames"
^done,stack=[frame={level="0",addr="0x000000000040115a",func="breakpt",file="amd64-invalid-stack-middle.c",fullname="/home/sergio/fedora/gdb/master/gdb-8.2.50.20180917/gdb/testsuite/gdb.arch/amd64-invalid-stack-middle.c",line="27",arch="i386:x86-64"},frame={level="1",addr="0x000000000040116a",func="func5",file="amd64-invalid-stack-middle.c",fullname="/home/sergio/fedora/gdb/master/gdb-8.2.50.20180917/gdb/testsuite/gdb.arch/amd64-invalid-stack-middle.c",line="32",arch="i386:x86-64"},frame={level="2",addr="0x000000000040117a",func="func4",file="amd64-invalid-stack-middle.c",fullname="/home/sergio/fedora/gdb/master/gdb-8.2.50.20180917/gdb/testsuite/gdb.arch/amd64-invalid-stack-middle.c",line="38",arch="i386:x86-64"},frame={level="3",addr="0x000000000040118a",func="func3",file="amd64-invalid-stack-middle.c",fullname="/home/sergio/fedora/gdb/master/gdb-8.2.50.20180917/gdb/testsuite/gdb.arch/amd64-invalid-stack-middle.c",line="44",arch="i386:x86-64"}]
This test is currently failing on Rawhide. However, this output is
almost the same as I get on my local Fedora 28 machine (where the test
is passing):
(gdb) interpreter-exec mi "-stack-list-frames"
^done,stack=[frame={level="0",addr="0x00000000004005da",func="breakpt",file="amd64-invalid-stack-middle.c",fullname="/home/sergio/work/src/git/binutils-gdb/binutils-gdb/gdb/testsuite/gdb.arch/amd64-invalid-stack-middle.c",line="27"},frame={level="1",addr="0x00000000004005ea",func="func5",file="amd64-invalid-stack-middle.c",fullname="/home/sergio/work/src/git/binutils-gdb/binutils-gdb/gdb/testsuite/gdb.arch/amd64-invalid-stack-middle.c",line="32"},frame={level="2",addr="0x00000000004005fa",func="func4",file="amd64-invalid-stack-middle.c",fullname="/home/sergio/work/src/git/binutils-gdb/binutils-gdb/gdb/testsuite/gdb.arch/amd64-invalid-stack-middle.c",line="38"},frame={level="3",addr="0x000000000040060a",func="func3",file="amd64-invalid-stack-middle.c",fullname="/home/sergio/work/src/git/binutils-gdb/binutils-gdb/gdb/testsuite/gdb.arch/amd64-invalid-stack-middle.c",line="44"}]
With the exception that there's an "arch=" keyword on Fedora Rawhide's
version. This is because, on Rawhide, I've compiled GDB with
"--enable-targets=xyz,kqp,etc.", while locally I haven't.
This is easy to fix: we just have to extend the regexp and expect for
the optional "arch=" keyword there. It's what this patch does. With
it applied, the test now passes everywhere.
OK?
gdb/testsuite/ChangeLog:
2018-09-18 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.arch/amd64-invalid-stack-middle.exp: Expect optional
"arch=" keyword when executing "-stack-list-frames".
Currently, gdb.ada/complete.exp's "complete break ada" test fails
because the regexp used to match the command's output doesn't expect
"@", but we have an output like:
...
complete break ada
break ada.assertions.assert
break ada.calendar.arithmetic.difference
break ada.calendar.arithmetic_operations.add
break ada.calendar.arithmetic_operations.add.cold
break ada.calendar.arithmetic_operations.add@plt
break ada.calendar.arithmetic_operations.difference
break ada.calendar.arithmetic_operations.difference@plt
...
This patch adds "@" to the regexp, unbreaking the test.
OK?
gdb/testsuite/ChangeLog:
2018-09-18 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.ada/complete.exp: Expect for "@" when doing "complete
break ada".
Since commit
56bcdbea2b ("Let gdb.execute handle multi-line commands")
trying to use a command like gdb.execute("show commands") in Python
fails. GDB ends up trying to run the "commands" command.
The reason is that GDB gets confused with the special "commands"
command. In process_next_line, the lookup_cmd_1 function returns the
cmd_list_element representing the "commands" sub-command of "show".
Lower, we check the cmd_list_element to see if it matches various
control commands by name, including the "commands" command. This is
where we wrongfully conclude that the executed command must be
"commands", when in reality it was "show commands".
The fix proposed in this patch removes the comparisons by name, instead
comparing the cmd_list_element object by pointer with the objects
created at initialization time.
Tested on the buildbot, though on a single builder (Fedora-x86_64-m64).
gdb/ChangeLog:
PR python/23669
* breakpoint.c (commands_cmd_element): New.
(_initialize_breakpoint): Assign commands_cmd_element.
* breakpoint.h (commands_cmd_element): New.
* cli/cli-script.c (while_cmd_element, if_command,
define_cmd_element): New.
(command_name_equals): Remove.
(process_next_line): Compare commands by pointer, not by name.
(_initialize_cli_script): Assign the various cmd_list_element
variables.
* compile/compile.c (compile_cmd_element): New.
(_initialize_compile): Assign compile_cmd_element.
* compile/compile.h (compile_cmd_element): New.
* guile/guile.c (guile_cmd_element): New.
(install_gdb_commands): Assign guile_cmd_element.
* guile/guile.h (guile_cmd_element): New.
* python/python.c (python_cmd_element): New.
(_initialize_python): Assign python_cmd_element.
* python/python.h (python_cmd_element): New.
* tracepoint.c (while_stepping_cmd_element): New.
(_initialize_tracepoint): Assign while_stepping_cmd_element.
* tracepoint.h (while_stepping_cmd_element): New.
gdb/testsuite/ChangeLog:
PR python/23669
* gdb.python/python.exp: Test gdb.execute("show commands").
I searched for other spots that did not use the GNU style for
metasyntactic syntactic variables. This patch fixes most of the ones
I found in gdb proper. There are a few remaining in MI, but I was
unsure whether those should be touched.
gdb/ChangeLog
2018-09-16 Tom Tromey <tom@tromey.com>
* top.c (new_ui_command): Use GNU style for metasyntactic
variables.
* breakpoint.c (stopat_command): Use GNU style for metasyntactic
variables.
* maint.c (maintenance_translate_address): Remove "<>" around
text.
* interps.c (interpreter_exec_cmd): Use GNU style for
metasyntactic variables.
* nto-procfs.c (nto_procfs_target_info): Use GNU style for
metasyntactic variables.
* tracepoint.c (tfind_range_command): Use GNU style for
metasyntactic variables.
(tfind_outside_command): Likewise.
(_initialize_tracepoint): Likewise.
* remote.c (extended_remote_target::create_inferior): Use GNU
style for metasyntactic variables.
* sparc64-tdep.c (adi_examine_command): Use GNU style for
metasyntactic variables.
(adi_assign_command): Likewise.
gdb/testsuite/ChangeLog
2018-09-16 Tom Tromey <tom@tromey.com>
* gdb.base/new-ui.exp (do_execution_tests): Update.
* gdb.base/dbx.exp (test_breakpoints): Update.
Simplfy gdb.exp by adding a function that will attempt to
compile a piece of code, then clean up, leaving the created
object.
gdb/testsuite
* lib/gdb.exp (gdb_simple_compile): Add proc.
(is_elf_target): Use gdb_simple_compile.
(skip_altivec_tests): Likewise.
(skip_vsx_tests): Likewise.
(skip_tsx_tests): Likewise.
(skip_btrace_tests): Likewise.
(skip_btrace_pt_tests): Likewise.
(gdb_can_simple_compile): Likewise.
(gdb_has_argv0): Likewise.
(gdb_target_symbol_prefix): Likewise.
(target_supports_scheduler_locking): Likewise.
I noticed that the TAGS target in gdb/testsuite/Makefile does not pick
up Tcl procs defined with proc_with_prefix or gdb_caching_proc. This
patch fixes this by updating the regexp.
Tested in Emacs.
gdb/testsuite/ChangeLog
2018-09-13 Tom Tromey <tom@tromey.com>
* Makefile.in (TAGS): Recognize proc_with_prefix and
gdb_caching_proc.
This patch adds an objfiles method to the Progspace object, which
returns a sequence of the objfiles associated to that program space. I
chose a method rather than a property for symmetry with gdb.objfiles().
gdb/ChangeLog:
* python/py-progspace.c (PSPY_REQUIRE_VALID): New macro.
(pspy_get_objfiles): New function.
(progspace_object_methods): New.
(pspace_object_type): Add tp_methods callback.
* python/python-internal.h (build_objfiles_list): New
declaration.
* python/python.c (build_objfiles_list): New function.
(gdbpy_objfiles): Implement using build_objfiles_list.
* NEWS: Mention the Progspace.objfiles method.
gdb/doc/ChangeLog:
* python.texi (Program Spaces In Python): Document the
Progspace.objfiles method.
(Objfiles In Python): Mention that gdb.objfiles() is identical
to gdb.selected_inferior().progspace.objfiles().
gdb/testsuite/ChangeLog:
* gdb.python/py-progspace.exp: Test the Progspace.objfiles
method.
This patch adds a progspace property to the gdb.Inferior type, which
allows getting the gdb.Progspace object associated to that inferior.
In conjunction with the following patch, this will allow scripts iterate
on objfiles associated with a particular inferior.
gdb/ChangeLog:
* python/py-inferior.c (infpy_get_progspace): New function.
(inferior_object_getset): Add progspace property.
* NEWS: Mention the new property.
gdb/doc/ChangeLog:
* python.texi (Inferiors In Python): Document
Inferior.progspace.
(Program Spaces In Python): Document that
gdb.current_progspace() is the same as
gdb.selected_inferior().progspace.
gdb/testsuite/ChangeLog:
* gdb.python/py-inferior.exp: Add tests for Inferior.progspace
and a few other Inferior properties when the Inferior is no
longer valid.
I noticed a spot in rust-lang.c where the placeholder "foo" was used
instead of the actual field name. This patch fixes the bug.
gdb/ChangeLog
2018-09-13 Tom Tromey <tom@tromey.com>
PR rust/23650:
* rust-lang.c (rust_evaluate_subexp): Use field name, not "foo".
gdb/testsuite/ChangeLog
2018-09-13 Tom Tromey <tom@tromey.com>
PR rust/23650:
* gdb.rust/simple.exp: Add test for enum field access error.
While testing my Rust compiler patch to fix the DWARF representation
of Rust enums (https://github.com/rust-lang/rust/pull/54004), I found
a gdb crash coming from one of the Rust test cases.
The bug here is that the new variant support in gdb does not handle
the case where there are no variants in the enum.
This patch fixes the problem in a straightforward way. Note that the
new tests are somewhat lax because I did not want to try to fully fix
this corner case for older compilers. If you think that's
unacceptable, let meknow.
Tested on x86-64 Fedora 28 using several versions of the Rust
compiler. I intend to push this to the 8.2 branch as well.
gdb/ChangeLog
2018-09-13 Tom Tromey <tom@tromey.com>
PR rust/23626:
* rust-lang.c (rust_enum_variant): Now static.
(rust_empty_enum_p): New function.
(rust_print_enum, rust_evaluate_subexp, rust_print_struct_def):
Handle empty enum.
gdb/testsuite/ChangeLog
2018-09-13 Tom Tromey <tom@tromey.com>
PR rust/23626:
* gdb.rust/simple.rs (EmptyEnum): New type.
(main): Use it.
* gdb.rust/simple.exp (test_one_slice): Add empty enum test.
Printing a GDB Python object is notoriously not helpful:
>>> print(gdb.selected_inferior())
<gdb.Inferior object at 0x7fea59aed198>
>>> print(gdb.objfiles())
[<gdb.Objfile object at 0x7fea59b57c90>]
This makes printing debug traces more difficult than it should be. This
patch provides some repr() implementation for these two types (more to
come if people agree with the idea, but I want to test the water first).
Here's the same example as above, but with this patch:
>>> print(gdb.selected_inferior())
<gdb.Inferior num=1>
>>> print(gdb.objfiles())
[<gdb.Objfile filename=/home/emaisin/build/binutils-gdb-gcc-git/gdb/test>]
I implemented repr rather than str, because when printing a list (or
another container I suppose), Python calls the repr method of the
elements. This is useful when printing a list of inferiors or objfiles.
The print(gdb.objfiles()) above would not have worked if I had
implemented str.
I found this post useful to understand the difference between repr and
str:
https://stackoverflow.com/questions/1436703/difference-between-str-and-repr
gdb/ChangeLog:
* python/py-inferior.c (infpy_repr): New.
(inferior_object_type): Register infpy_repr.
* python/py-objfile.c (objfpy_repr): New.
(objfile_object_type): Register objfpy_repr.
gdb/testsuite/ChangeLog:
* gdb.python/py-inferior.exp: Test repr() of gdb.Inferior.
* gdb.python/py-objfile.exp: Test repr() of gdb.Objfile.
* gdb.python/py-symtab.exp: Update test printing an objfile.
gdb/doc/ChangeLog:
* python.texi (Basic Python): Mention the string representation
of GDB Python objects.
This patch adds tests for trying to use property or methods on a
gdb.Inferior object that represents an inferior that does not exist
anymore. We expect an exception to be thrown.
gdb/testsuite/ChangeLog:
* gdb.python/py-inferior.exp: Test using an invalid gdb.Inferior
object.
Simplfy gdb.exp by adding a function that will attempt to
compile a piece of code, then clean up.
gdb/testsuite
* lib/gdb.exp (gdb_can_simple_compile): Add proc.
(support_complex_tests): Use gdb_can_simple_compile.
(is_ilp32_target): Likewise.
(is_lp64_target): Likewise.
(is_64_target): Likewise.
(is_amd64_regs_target): Likewise.
(is_aarch32_target): Likewise.
(gdb_int128_helper): Likewise.
There was a typo in patch:
commit 5a6996172e
Author: Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
Date: Mon Aug 6 16:05:16 2018 +0200
Update dg-extract-results.* from gcc
gdb/testsuite/ChangeLog
2018-09-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* Makefile.in (check-parallel-racy): Fix dg-extract-results.sh path.
ada_value_struct_elt is used when displaying a component (say, 'N') of
a record object (say, 'Obj') of type, say, 't1'. Now if Obj is tagged
(Ada parlance: "tagged types" are what other object-oriented languages
call "classes"), then 'N' may not be visible in the current view and
we need to look for it in its actual type. We do that at the same time
as resolving variable-length fields. This would typically be done by
the following call to ada_value_struct_elt, with the last parameter
check_tag set to 1:
t1 = ada_to_fixed_type (ada_get_base_type (t1), NULL,
address, NULL, 1);
This is the general logic, but recently we introduced a special case
to handle homonyms. Different components may have the same name in a
tagged type. For instance:
type Top_T is tagged record
N : Integer := 1;
end record;
type Middle_T is new Top.Top_T with record
N : Character := 'a';
end record;
Middle_T extends Top_T and both define a (different) component with
the same name ('N'). In such a case, using the actual type of a
Middle_T object would create a confusion, since we would have two
component 'N' in this actual type.
So, to handle homonyms, we convert t1 to the actual type *if
and only if* N cannot be found in the current view. For example, if Obj
has been created as a Middle_T but is seen as a Top_T'Class at our
point of execution, then "print Obj.N" will display the integer field
defined in Top_T's declaration.
Now, even if we find N in the current view, we still have to get a
fixed type: for instance, the record can be unconstrained and we still
need a fixed type to get the proper offset to each field. That is
to say, in this case:
type Dyn_Top_T (Disc : Natural) is tagged record
S : Integer_Array (1 .. Disc) := (others => Disc);
N : Integer := 1;
end record;
type Dyn_Middle_T is new Dyn_Top.Dyn_Top_T with record
N : Character := 'a';
U : Integer := 42;
end record;
If we have an object Obj of type Dyn_Middle_T and we want to display
U, we don't need to build, from its tag, a real type with all its real
fields. In other words, we don't need to add the parent components:
Disc, S, and the integer N. We only need to access U and it is
directly visible in Dyn_Middle_T. So no tag handling. However, we do
need to build a fixed-size type to have the proper offset to U (since
this offset to U depends on the size of Obj.S, which itself is dynamic
and depends on the value of Obj.Disc).
We accidentally lost some of this treatment when we introduced the
resolution of homonyms. This patch re-install this part by uncoupling
the tag resolution from the "fixing" of variable-length components.
This change also slightly simplifies the non-tagged case: in the
non-tagged case, no need to set check_tag to 1, since we already know
that there is no tag.
gdb/ChangeLog:
* ada-lang.c (ada_value_struct_elt): Call ada_to_fixed_type
with check_tag to 1 if and only if the type is tagged and the
component being searched cannot been found in the current
view. Otherwise, always call ada_to_fixed_type with
check_tag to 0.
gdb/testsuite/ChangeLog:
* gdb.ada/same_component_name: Add test for case of tagged record
with variable-length fields.
Using this Ada code:
type String_Access is access String;
type Array_Of_String is array (1 .. 2) of String_Access;
Aos : Array_Of_String := (new String'("ab"), new String'("cd"));
When debugging with GDB, printing each Aos element displays:
(gdb) print Aos(1)
$2 = "ab"
(gdb) print Aos(2)
$3 = "cd"
Whereas it should display:
(gdb) print Aos(1)
$2 = (foo_r118_024.string_access) 0x635018
(gdb) print Aos(2)
$3 = (foo_r118_024.string_access) 0x635038
Notice that printing the entire array works:
(gdb) print Aos
$1 = (0x635018, 0x635038)
The problem was located in ada_value_print function and due to the fact
that the value_type used in this function was based on
value_enclosing_type rather than value_type itself.
In our example, the difference between the value_type and the
value_enclosing_type of the value is that the value_type contains an
additional typedef layer which is not present in the value_enclosing_type.
This typedef layer is GNAT's way to specify that the element is, at the
source level, an access to the unconstrained array, rather than the
unconstrained array.
Moreover, the value_enclosing_type is not really needed in that case and
the value_type can be used instead in this function, and this patch fixes
this.
gdb/ChangeLog:
* ada-valprint.c (ada_value_print): Use type instead of
enclosing type.
testsuite/ChangeLog:
* gdb.ada/access_to_unbounded_array.exp: New testcase.
* gdb.ada/access_to_unbounded_array/foo.adb: New file.
* gdb.ada/access_to_unbounded_array/pack.adb: New file.
* gdb.ada/access_to_unbounded_array/pack.ads: New file.
Tested: x86_64-linux
Using this Ada code:
type String_Access is access String;
type Array_Of_String is array (1 .. 2) of String_Access;
Aos : Array_Of_String := (new String'("ab"), new String'("cd"));
In GDB/MI mode, create a variable which type is Aos, evaluate it:
(gdb) -var-create var1 * Aos
^done,name="var1",numchild="2",value="[2]",type="bar.array_of_string",thread-id="1",has_more="0"
Now print it:
(gdb) -var-list-children 1 var1
^done,numchild="2",children=[child={name="var1.1",exp="1",numchild="1",value="[2] \"ab\"", type="bar.string_access",thread-id="1"},child={name="var1.2",exp="2",numchild="1",value="[2] \"cd\"", type="bar.string_access",thread-id="1"}],has_more="0"
But printed fields "value" are wrong, since it should be:
^done,numchild="2",children=[child={name="var1.1",exp="1",numchild="1",value="0x634018",type="bar.string_access",thread-id="1"},child={name="var1.2",exp="2",numchild="1",value="0x634038",type="bar.string_access",thread-id="1"}],has_more="0"^M
Print each child of var1:
(gdb) -var-evaluate-expression var1.1
^done,value="[2] \"ab\""
(gdb) -var-evaluate-expression var1.2
^done,value="[2] \"cd\""
Whereas it should be
(gdb) -var-evaluate-expression var1.1
^done,value="0x635018"
(gdb) -var-evaluate-expression var1.2
^done,value="0x635038"
This patch fixes this.
gdb/ChangeLog:
* ada-lang.c (ada_value_subscript): Handle case when parameter is
an array of access to unconstrained array.
testsuite/ChangeLog
* gdb.ada/mi_string_access.exp: New testcase.
* gdb.ada/mi_string_access/bar.adb: New file.
* gdb.ada/mi_string_access/pck.adb: New file.
* gdb.ada/mi_string_access/pck.asd: New file.
Tested on x86_64-linux.
Using this Ada code:
type Union_Type (A : Boolean := False) is record
case A is
when True => B : Integer;
when False => C : Float;
end case;
end record;
pragma Unchecked_Union (Union_Type);
Ut : Union_Type := (A => True, B => 3);
In GDB/MI mode, once creating a varobj from variable "Ut" as follow:
(gdb) -var-create var1 * ut
^done,name="var1",numchild="2",value="{...}",type="foo.union_type",thread-id="1",has_more="0"
Printing the list of its children displays:
(gdb) -var-list-children 1 var1
^error,msg="Duplicate variable object name"
Whereas it should be
(gdb) -var-list-children 1 var1
^done,numchild="2",children=[child={name="var1.b",exp="b",numchild="0",value="3",type="integer",thread-id="1"},child={name="var1.c",exp="c",numchild="0",value="4.20389539e-45",type="float",thread-id="1"}],has_more="0"
The problem occurs because ada_varobj_describe_struct_child wasn't
handling unions. This patch fixes this.
gdb/ChangeLog:
* ada-varobj.c (ada_varobj_describe_struct_child)
(ada_varobj_describe_child): Handle union case like struct one.
testsuite/ChangeLog
* gdb.ada/mi_var_union.exp: New testcase.
* gdb.ada/mi_var_union/bar.adb: New file.
* gdb.ada/mi_var_union/pck.adb: New file.
* gdb.ada/mi_var_union/pck.asd: New file.
Tested on x86_64-linux.
I noticed that the py-prettyprint.exp test names were not unique.
This patch fixes the problem via with_test_prefix.
gdb/testsuite/ChangeLog
2018-09-08 Tom Tromey <tom@tromey.com>
* gdb.python/py-prettyprint.exp: Use with_test_prefix.
PR python/16047 points out that, while the documentation says that the
to_string method is optional for a pretty-printer, the code disagrees
and throws an exception. This patch fixes the problem. varobj is
already ok here.
Tested on x86-64 Fedora 26.
gdb/ChangeLog
2018-09-08 Tom Tromey <tom@tromey.com>
PR python/16047:
* python/py-prettyprint.c (pretty_print_one_value): Check for
to_string method.
gdb/testsuite/ChangeLog
2018-09-08 Tom Tromey <tom@tromey.com>
PR python/16047:
* gdb.python/py-prettyprint.py (pp_int_typedef3): New class.
(register_pretty_printers): Register new printer.
* gdb.python/py-prettyprint.exp (run_lang_tests): Add int_type3
test.
* gdb.python/py-prettyprint.c (int_type3): New typedef.
(an_int_type3): New global.
Consider the following function, which takes no parameter and returns
an integer:
function Something return Integer;
For the purpose of this discussion, our function has been implemented
to always return 124:
function Something return Integer is
begin
return 124;
end Something;
In Ada, such function can been called without using the parentheses.
For instance, in the statement below, variable My_Value is assigned
the returned value from the call to Something:
My_Value := Something;
The Ada expression interpeter in GDB supports this case, as we can
see below:
(gdb) print something
$1 = 124
However, we get fairly strange results when trying to use this feature
as part of a larger expression. For instance:
(gdb) print something + 1
$2 = 248
The problem occurs while doing the resolution pass of the expression.
After prefixying the expression, we obtain the following expression:
0 BINOP_ADD
1 OP_VAR_VALUE Block @0x2021550, symbol @0x20213a0 (pck.something)
5 OP_LONG Type @0x1e3c170 (int), value 1 (0x1)
The resolution pass is then expected to remove the OP_VAR_VALUE
entry, and replace it with an OP_FUNCALL. This is what the call
to replace_operator_with_call in ada-lang.c::resolve_subexp is
expected to do:
if (deprocedure_p
&& (TYPE_CODE (SYMBOL_TYPE (exp->elts[pc + 2].symbol))
== TYPE_CODE_FUNC))
{
replace_operator_with_call (expp, pc, 0, 0,
exp->elts[pc + 2].symbol,
exp->elts[pc + 1].block);
exp = expp->get ();
}
The problem is that we're passing OPLEN (zero -- 4th parameter in
the call), and so replace_operator_with_call ends up removing zero
element from our expression, and inserting the corresponding OP_FUNCALL
instead. As a result, instead of having the OP_LONG (1) as the second
argument of the BINOP_ADD, it is now the OP_VAR_VALUE that we were
meant to replace. That OP_VAR_VALUE then itself gets transformed into
an OP_FUNCALL, with the same issue, and eventually, the resolved
expression now looks like this:
0 BINOP_ADD
1 OP_FUNCALL Number of args: 0
4 OP_VAR_VALUE Block @0x2021550, symbol @0x20213a0 (pck.something)
8 OP_FUNCALL Number of args: 0
11 OP_VAR_VALUE Block @0x2021550, symbol @0x20213a0 (pck.something)
15 OP_VAR_VALUE Block @0x2021550, symbol @0x20213a0 (pck.something)
19 OP_LONG Type @0x1e3c170 (int), value 1 (0x1)
This explains why we get twice the result of the function call
instead of its value plus one. The extra entries in the expression
at the end are just ignored.
This patch fixes the issue by calling replace_operator_with_call
with the correct OPLEN equal to the size of an OP_VAR_VALUE (4).
gdb/ChangeLog:
* ada-lang.c (resolve_subexp): Pass correct OPLEN in call to
replace_operator_with_call.
gdb/testsuite/ChangeLog:
* gdb.ada/expr_with_funcall: New testcase.
Consider a variable "PRA" defined as a packed array of packed
records as follow:
subtype Int is Integer range 0 .. 7;
type Packed_Rec is record
X, Y : Int;
W : Integer;
end record;
pragma Pack (Packed_Rec);
type Packed_RecArr is array (Integer range <>) of Packed_Rec;
pragma Pack (Packed_RecArr);
PRA : Packed_RecArr (1 .. 3);
Consider also a variable "PR", which is a Packed_Rec record,
declared as follow:
PR : Packed_Rec := (2, 2, 2);
Trying to assign a new value to PRA using an aggregate expression
where one of the components is our variable PR yields the wrong
result on big-endian machines (e.g. on ppc-linux):
(gdb) p pra := (pr, (2,2,2), (2,2,2))
$6 = ((x => 1, y => 0, w => 8), [...]
On the other hand, replacing "pr" by "(2,2,2)" does work.
I tracked the issue down to the bit offset we use to extract
the value of "PR" and copy it inside PRA. in value_assign_to_component,
we have:
if (gdbarch_bits_big_endian (get_type_arch (value_type (container))))
move_bits ([target buffer], [bit offset in target buffer],
[source buffer where PR is stored],
TYPE_LENGTH (value_type (component)) * TARGET_CHAR_BIT - bits,
bits, 1);
The issue is with the third-to-last argument, which provides the bit
offset where the value of PR is stored relative to its start address,
and therefore the bit offset relative to the start of the source
buffer passed as the previous argument.
In our case, component is a 38bit packed record whose TYPE_LENGTH
is 5 bytes, so the bit-offset that gets calculated is 2 (bits).
However, that formula only really applies to scalars, whereas
in our case, we have a record (struct). The offset in the non-scalar
case should be zero.
gdb/ChangeLog:
* ada-lang.c (value_assign_to_component): In the case of
big-endian targets, extract the bits of the given VAL
using an src_offset of zero if container is not a scalar.
gdb/testsuite/ChangeLog:
* gdb.ada/packed_array_assign: New testcase.
Extend test names and add test name prefixes to make test names
unique.
gdb/testsuite/ChangeLog:
* gdb.base/watchpoint.exp (test_complex_watchpoint): Extend test
names, and add test prefixes to make test names unique.
Consider a vla variable 'a' in function f1:
...
<2><1a7>: Abbrev Number: 11 (DW_TAG_variable)
<1a8> DW_AT_description : a
<1aa> DW_AT_abstract_origin: <0x311>
...
with abstract origin 'a':
...
<2><311>: Abbrev Number: 3 (DW_TAG_variable)
<312> DW_AT_name : a
<317> DW_AT_type : <0x325>
...
and inherited abstract vla type:
...
<1><325>: Abbrev Number: 9 (DW_TAG_array_type)
<326> DW_AT_type : <0x33a>
<2><32e>: Abbrev Number: 10 (DW_TAG_subrange_type)
<32f> DW_AT_type : <0x2ea>
<333> DW_AT_upper_bound : 5 byte block: fd 1b 3 0 0
(DW_OP_GNU_variable_value: <0x31b>)
...
where the upper bound refers to this artificial variable D.1922 without location
attribute:
...
<2><31b>: Abbrev Number: 8 (DW_TAG_variable)
<31c> DW_AT_description : (indirect string, offset: 0x39a): D.1922
<320> DW_AT_type : <0x2ea>
<324> DW_AT_artificial : 1
...
Currently, when we execute "p sizeof (a)" in f1, the upper bound is calculated
by evaluating the DW_OP_GNU_variable_value expression referring to D.1922, but
since that die doesn't have a location attribute, we get:
...
value has been optimized out
...
However, there's also artificial variable D.4283 that is sibling of vla
variable 'a', has artificial variable D.1922 as abstract origin, and has a
location attribute:
...
<2><1ae>: Abbrev Number: 12 (DW_TAG_variable)
<1af> DW_AT_description : (indirect string, offset: 0x1f8): D.4283
<1b3> DW_AT_abstract_origin: <0x31b>
<1b7> DW_AT_location : 11 byte block: 75 1 8 20 24 8 20 26 31 1c 9f
(DW_OP_breg5 (rdi):1; DW_OP_const1u: 32;
DW_OP_shl; DW_OP_const1u: 32; DW_OP_shra;
DW_OP_lit1; DW_OP_minus; DW_OP_stack_value)
...
The intended behaviour for DW_OP_GNU_variable_value is to find a die that
refers to D.1922 as abstract origin, has a location attribute and is
'in scope', so the expected behaviour is:
...
$1 = 6
...
The 'in scope' concept can be thought of as variable D.1922 having name
attribute "D.1922", and variable D.4283 inheriting that attribute, resulting
in D.4283 being declared with name "D.1922" alongside vla a in f1, and when we
lookup "DW_OP_GNU_variable_value D.1922", it should work as if we try to find
the value of a variable named "D.1922" on the gdb command line using
"p D.1922", and we should return the value of D.4283.
This patch fixes the case described above, by:
- adding a field abstract_to_concrete to struct dwarf2_per_objfile,
- using that field to keep track of which concrete dies are instances of an
abstract die, and
- using that information when getting the value DW_OP_GNU_variable_value.
Build and reg-tested on x86_64-linux.
2018-09-05 Tom de Vries <tdevries@suse.de>
* dwarf2loc.c (sect_variable_value): Call indirect_synthetic_pointer
with resolve_abstract_p == true.
(indirect_synthetic_pointer): Add resolve_abstract_p parameter,
defaulting to false. Propagate resolve_abstract_p to
dwarf2_fetch_die_loc_sect_off.
* dwarf2loc.h (dwarf2_fetch_die_loc_sect_off): Add resolve_abstract_p
parameter, defaulting to false.
* dwarf2read.c (read_variable): Add variable to abstract_to_concrete.
(dwarf2_fetch_die_loc_sect_off): Add and handle resolve_abstract_p
parameter.
* dwarf2read.h (struct die_info): Forward-declare.
(die_info_ptr): New typedef.
(struct dwarf2_per_objfile): Add abstract_to_concrete field.
* gdb.dwarf2/varval.exp: Add test.
This commit adds calls to remote_close and clear_gdb_spawn_id to
gdb.base/batch-exit-status.exp, fixing failures reported by buildbot
on Fedora 28 where gdb_spawn_id not being reset by the previous test
caused default_gdb_spawn to return without spawning.
This commit also changes the test to use detect GDB's exit using
gdb_test_multiple expecting 'eof', rather than using 'wait -i' alone.
This means the testcase won't hang forever on failure as fixed in
gdb.base/quit.exp by commit 15763a09d4 ("Fix 'gdb.base/quit.exp
hangs forever' if the test fails").
gdb/testsuite/ChangeLog:
* gdb.base/batch-exit-status.exp: Use gdb_test_multiple and expect
'eof' before 'wait -i'. Use remote_close and clear_gdb_spawn_id.
I noticed that gdb.rust/simple.rs had two local variables named "v".
This didn't previous cause problems, but with a newer rust compiler
this resulted in a test failure. (It should have failed all along, so
I suppose earlier passes were due to a compiler bug.)
This patch renames the second variable.
gdb/testsuite/ChangeLog
2018-08-31 Tom Tromey <tom@tromey.com>
* gdb.rust/simple.rs: Rename second variable "v".
In the test gdb.base/funcargs.exp, there's this function:
void recurse (SVAL a, int depth)
{
a.s = a.i = a.l = --depth;
if (depth == 0)
hitbottom ();
else
recurse (a, depth);
}
The test script places a breakpoint in hitbottom, and runs the
executable which calls recurse with an initial depth of 4.
When GDB hits the breakpoint in hitbottom the testscript performs a
backtrace, and examines 'a' at each level.
The problem is that 'a' is not live after either the call to
'hitbottom' or the call to 'recurse', and as a result the test fails.
In the particular case I was looking at GCC for RISC-V 32-bit, the
variable 'a' is on the stack and GCC selects the register $ra (the
return address register) to hold the pointer to 'a'. This is fine,
because, by the time the $ra register is needed to hold a return
address (calling hitbottom or recurse) then 'a' is dead.
In this patch I propose that a use of 'a' is added after the calls to
hitbottom and recurse, this should cause the compiler to keep 'a'
around, which should ensure GDB can find it.
gdb/testsuite/ChangeLog:
* gdb.base/funcargs.c (use_a): New function.
(recurse): Call use_a.
This patch adds *basic* support for C++ to the compile feature. It does
most simple type conversions, including everything that C compile does and
your basic "with-classes" type of C++.
I've written a new compile-support.exp support file which adds a new test
facility for automating and simplifying "compile print" vs "compile code"
testing. See testsuite/lib/compile-support.exp and CompileExpression
for more on that. The tests use this facility extensively.
This initial support has several glaring omissions:
- No template support at all
I have follow-on patches for this, but they add much complexity
to this "basic" support. Consequently, they will be submitted separately.
- Cannot print functions
The code template needs tweaking, and I simply haven't gotten to it yet.
- So-called "special function" support is not included
Using constructors, destructors, operators, etc will not work. I have
follow-on patches for that, but they require some work because of the
recent churn in symbol searching.
- There are several test suite references to "compile/1234" bugs.
I will file bugs and update the test suite's bug references before pushing
these patches.
The test suite started as a copy of the original C-language support, but
I have written tests to exercise the basic functionality of the plug-in.
I've added a new option for outputting debug messages for C++ type-conversion
("debug compile-cplus-types").
gdb/ChangeLog:
* Makefile.in (SUBDIR_GCC_COMPILE_SRCS): Add compile-cplus-symbols.c
and compile-cplus-types.c.
(HFILES_NO_SRCDIR): Add gcc-cp-plugin.h.
* c-lang.c (cplus_language_defn): Set C++ compile functions.
* c-lang.h (cplus_get_compile_context, cplus_compute_program):
Declare.
* compile/compile-c-support.c: Include compile-cplus.h.
(load_libcompile): Templatize.
(get_compile_context): "New" function.
(c_get_compile_context): Use get_compile_context.
(cplus_get_compile_context): New function.
(cplus_push_user_expression, cplus_pop_user_expression)
(cplus_add_code_header, cplus_add_input, cplus_compile_program)
(cplus_compute_program): Define new structs/functions.
* compile/compile-cplus-symmbols.c: New file.
* compile/compile-cplus-types.c: New file.
* compile/compile-cplus.h: New file.
* compile/compile-internal.h (debug_compile_oracle, GCC_TYPE_NONE):
Declare.
* compile/compile-object-load.c (get_out_value_type): Use
strncmp_iw when comparing symbol names.
(compile_object_load): Add mst_bss and mst_data.
* compile/compile.c (_initialize_compile): Remove
-Wno-implicit-function-declaration from `compile_args'.
* compile/gcc-cp-plugin.h: New file.
* NEWS: Mention C++ compile support and new debug options.
gdb/testsuite/ChangeLog:
* gdb.compile/compile-cplus-anonymous.cc: New file.
* gdb.compile/compile-cplus-anonymous.exp: New file.
* gdb.compile/compile-cplus-array-decay.cc: New file.
* gdb.compile/compile-cplus-array-decay.exp: New file.
* gdb.compile/compile-cplus-inherit.cc: New file.
* gdb.compile/compile-cplus-inherit.exp: New file.
* gdb.compile/compile-cplus-member.cc: New file.
* gdb.compile/compile-cplus-member.exp: New file.
* gdb.compile/compile-cplus-method.cc: New file.
* gdb.compile/compile-cplus-method.exp: New file.
* gdb.compile/compile-cplus-mod.c: "New" file.
* gdb.compile/compile-cplus-namespace.cc: New file.
* gdb.compile/compile-cplus-namespace.exp: New file.
* gdb.compile/compile-cplus-nested.cc: New file.
* gdb.compile/compile-cplus-nested.exp: New file.
* gdb.compile/compile-cplus-print.c: "New" file.
* gdb.compile/compile-cplus-print.exp: "New" file.
* gdb.compile/compile-cplus-virtual.cc: New file.
* gdb.compile/compile-cplus-virtual.exp: New file.
* gdb.compile/compile-cplus.c: "New" file.
* gdb.compile/compile-cplus.exp: "New" file.
* lib/compile-support.exp: New file.
doc/ChangeLog:
* gdb.texinfo (Compiling and injecting code in GDB): Document
set/show "compile-oracle" and "compile-cplus-types" commands.
Tom Tromey
Sandra Loosemore
Simon Marchi
Alan Hayward
Markus Metzger
Andrew Burgess
Jozef Lawrynowicz
Hafiz Abid Qadeer
Richard Bunt
Sergio Durigan Junior
Simon Marchi
Jan Kratochvil
Jerome Guitton
Xavier Roirand
Joel Brobecker
Tom de Vries
Gary Benson
Keith Seitz