Running gdb.threads/fork-plus-threads.exp against gdbserver in
extended-remote mode, even though the test passes, we still see broken
behavior:
(gdb) PASS: gdb.threads/fork-plus-threads.exp: set detach-on-fork off
continue &
Continuing.
(gdb) PASS: gdb.threads/fork-plus-threads.exp: continue &
[New Thread 28092.28092]
[Thread 28092.28092] #2 stopped.
[New Thread 28094.28094]
[Inferior 2 (process 28092) exited normally]
[New Thread 28094.28105]
[New Thread 28094.28109]
...
[Thread 28174.28174] #18 stopped.
[New Thread 28185.28185]
[Inferior 10 (process 28174) exited normally]
[New Thread 28185.28196]
[Thread 28185.28185] #20 stopped.
Cannot remove breakpoints because program is no longer writable.
Further execution is probably impossible.
[Inferior 11 (process 28185) exited normally]
[Inferior 1 (process 28091) exited normally]
PASS: gdb.threads/fork-plus-threads.exp: reached breakpoint
info threads
No threads.
(gdb) PASS: gdb.threads/fork-plus-threads.exp: no threads left
info inferiors
Num Description Executable
* 1 <null> /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.threads/fork-plus-threads
(gdb) PASS: gdb.threads/fork-plus-threads.exp: only inferior 1 left
All the "[Thread FOO] #NN stopped." above are bogus, as well as the
"Cannot remove breakpoints because program is no longer writable.",
which is a consequence.
The problem is that when we intercept a fork event, we should report
the event for the parent, only, and leave the child stopped, but not
report its stop event. GDB later decides whether to follow the parent
or the child. But because handle_extended_wait does not set the
child's last_status.kind to TARGET_WAITKIND_STOPPED, a
stop_all_threads/unstop_all_lwps sequence (e.g., from trying to access
memory) by mistake ends up queueing a SIGSTOP on the child, resuming
it, and then when that SIGSTOP is intercepted, because the LWP has
last_resume_kind set to resume_stop, gdbserver reports the stop to
GDB, as GDB_SIGNAL_0:
...
>>>> entering unstop_all_lwps
unstopping all lwps
proceed_one_lwp: lwp 1600
client wants LWP to remain 1600 stopped
proceed_one_lwp: lwp 1828
Client wants LWP 1828 to stop. Making sure it has a SIGSTOP pending
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Sending sigstop to lwp 1828
pc is 0x3615ebc7cc
Resuming lwp 1828 (continue, signal 0, stop expected)
continue from pc 0x3615ebc7cc
unstop_all_lwps done
sigchld_handler
<<<< exiting unstop_all_lwps
handling possible target event
>>>> entering linux_wait_1
linux_wait_1: [<all threads>]
my_waitpid (-1, 0x40000001)
my_waitpid (-1, 0x1): status(137f), 1828
LWFE: waitpid(-1, ...) returned 1828, ERRNO-OK
LLW: waitpid 1828 received Stopped (signal) (stopped)
pc is 0x3615ebc7cc
Expected stop.
LLW: resume_stop SIGSTOP caught for LWP 1828.1828.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...
linux_wait_1 ret = LWP 1828.1828, 1, 0
<<<< exiting linux_wait_1
Writing resume reply for LWP 1828.1828:1
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Tested on x86_64 Fedora 20, extended-remote.
gdb/gdbserver/ChangeLog:
2015-07-30 Pedro Alves <palves@redhat.com>
* linux-low.c (handle_extended_wait): Set the child's last
reported status to TARGET_WAITKIND_STOPPED.
After previous patch, we don't need global variable arm_hwcap. This
patch is to remove it.
gdb/gdbserver:
2015-07-30 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (arm_hwcap): Remove it.
(arm_read_description): New local variable arm_hwcap. Don't
set arm_hwcap to zero.
arm_hwcap is a global variable, and we should avoid using it as much
as we can. Instead of checking arm_hwcap, we can check whether
regcache->tdesc is a certain kind of target description. This is
what this patch does.
gdb/gdbserver:
2015-07-30 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (arm_fill_wmmxregset): Don't use arm_hwcap.
Use regcache->tdesc instead.
(arm_store_wmmxregset): Likewise.
(arm_fill_vfpregset): Likewise.
(arm_store_vfpregset): Likewise.
In order to align with arm-linux-nat.c counterparts, we don't use
arm_num_regs and arm_regmap in functions arm_fill_gregset and
arm_store_gregset. Instead, we use register numbers. With this
patch applied, arm_fill_gregset and arm_store_gregset don't need
arm_num_regs and arm_regmap, and they will be moved to a separate
file shared for both arm and aarch64 in the following patch.
gdb/gdbserver:
2015-07-30 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c: Include arch/arm.h.
(arm_fill_gregset): Don't use arm_num_regs and arm_regmap.
(arm_store_gregset): Likewise.
Since Pedro's ptrace cleanups, the MIPS buildbot compilation fails.
Code in MIPS native uses ptrace with 3 arguments, where ptrace requires
4. When looking at the definition of ptrace in
/usr/include/sys/ptrace.h, it shows that it takes a variable number of
arguments. The wrapper macro in nat/gdb_ptrace.h takes a fixed number
of arguments (4). That would explain why it used to work and stopped.
I am pushing this as obvious, tell me if there is any problem.
I built-tested this with a MIPS toolchain (ct-ng), but I don't have any
setup to test it. At least it should put back the buildbot builder in a
better shape.
gdb/ChangeLog:
* mips-linux-nat.c (write_watchpoint_regs): Add NULL as ptrace's 4th
parameter.
(mips_linux_new_thread): Likewise.
* nat/mips-linux-watch.c (mips_linux_read_watch_registers): Likewise.
gdb/gdbserver/ChangeLog:
* linux-mips-low.c (mips_linux_prepare_to_resume): Add NULL as
ptrace's 4th parameter.
We don't use PTRACE_PEEKUSR/PTRACE_POKEUSR on aarch64-linux, so don't
need to set srv_linux_usrregs. This patch removes that line.
gdb/gdbserver:
2015-07-27 Yao Qi <yao.qi@linaro.org>
* configure.srv (case aarch64*-*-linux*): Don't set
srv_linux_usrregs.
Building in C++ mode issues ~40 warnings like this:
../../src/gdb/linux-nat.c: In function ‘int linux_handle_extended_wait(lwp_info*, int, int)’:
../../src/gdb/linux-nat.c:2016:51: warning: invalid conversion from ‘int’ to ‘__ptrace_request’ [-fpermissive]
ptrace (PTRACE_GETEVENTMSG, pid, 0, &new_pid);
The issue is that in glibc, ptrace's first parameter is an enum.
That's not a problem if we pick the PTRACE_XXX requests from
sys/ptrace.h, as those will be values of the corresponding enum.
However, we have fallback definitions for PTRACE_XXX symbols when the
system headers miss them (such as PTRACE_GETEVENTMSG above), and those
are plain integer constants. E.g., nat/linux-ptrace.h:
#define PTRACE_GETEVENTMSG 0x4201
One idea would be to fix this by defining those fallbacks like:
-#define PTRACE_GETEVENTMSG 0x4201
+#define PTRACE_GETEVENTMSG ((enum __ptrace_request) 0x4201)
However, while glibc's ptrace uses enum __ptrace_request for first
parameter:
extern long int ptrace (enum __ptrace_request __request, ...) __THROW;
other libc's, like e.g., Android's bionic do not -- in that case, the
first parameter is int:
long ptrace(int request, pid_t pid, void * addr, void * data);
So the fix I came up is to make configure/ptrace.m4 also detect the
type of the ptrace's first parameter and defin PTRACE_TYPE_ARG1, as
already does the for parameters 3-4, and then simply wrap ptrace with
a macro that casts the first argument to the detected type. (I'm
leaving adding a nicer wrapper for when we drop building in C).
While this adds the wrapper, GNU/Linux files won't use it until the
next patch, which makes all native GNU/Linux files include
gdb_ptrace.h.
gdb/ChangeLog:
2015-07-24 Pedro Alves <palves@redhat.com>
* ptrace.m4 (ptrace tests): Test in C++ mode. Try with 'enum
__ptrace_request as first parameter type instead of int.
(PTRACE_TYPE_ARG1): Define.
* nat/gdb_ptrace.h [!PTRACE_TYPE_ARG5] (ptrace): Define as wrapper
that casts first argument to PTRACE_TYPE_ARG1.
* config.in: Regenerate.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2015-07-24 Pedro Alves <palves@redhat.com>
* config.in: Regenerate.
* configure: Regenerate.
This factors the ptrace checks out of gdb's configure.ac to a new
ptrace.m4 file, and then makes gdbserver's configure.ac source it too.
gdb/ChangeLog:
2015-07-24 Pedro Alves <palves@redhat.com>
* acinclude.m4: Include ptrace.m4.
* configure.ac: Call GDB_AC_PTRACE and move ptrace checks ...
* ptrace.m4: ... to this new file.
gdb/gdbserver/ChangeLog:
2015-07-24 Pedro Alves <palves@redhat.com>
* acinclude.m4: Include ../ptrace.m4.
* configure.ac: Call GDB_AC_PTRACE.
* config.in, configure: Regenerate.
As the result of the previous patch, new_inferior is no longer used.
This patch is to remove it.
gdb/gdbserver:
2015-07-24 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_create_inferior): Remove setting to
proc->priv->new_inferior.
(linux_attach): Likewise.
(linux_low_filter_event): Likewise.
* linux-low.h (struct process_info_private) <new_inferior>: Remove.
Nowadays, when --wrapper is used, GDBserver skips extra traps/stops
in the wrapper program, and stops at the first instruction of the
program to be debugged. However, GDBserver created target description
in the first stop of inferior, and the executable of the inferior
is the wrapper program rather than the program to be debugged. In
this way, the target description can be wrong if the architectures
of wrapper program and program to be debugged are different. This
is shown by some fails in gdb.server/wrapper.exp on buildbot.
We are testing i686-linux GDB (Fedora-i686) on an x86_64-linux box
(fedora-x86-64-4) in buildbot, such configuration causes fails in
gdb.server/wrapper.exp like this:
spawn /home/gdb-buildbot-2/fedora-x86-64-4/fedora-i686/build/gdb/testsuite/../../gdb/gdbserver/gdbserver --once --wrapper env TEST=1 -- :2346 /home/gdb-buildbot-2/fedora-x86-64-4/fedora-i686/build/gdb/testsuite/outputs/gdb.server/wrapper/wrapper
Process /home/gdb-buildbot-2/fedora-x86-64-4/fedora-i686/build/gdb/testsuite/outputs/gdb.server/wrapper/wrapper created; pid = 8795
Can't debug 64-bit process with 32-bit GDBserver
Exiting
target remote localhost:2346
localhost:2346: Connection timed out.
(gdb) FAIL: gdb.server/wrapper.exp: setting breakpoint at marker
See https://sourceware.org/ml/gdb-testers/2015-q3/msg01541.html
In this case, program to be debugged ("wrapper") is 32-bit but wrapper
program ("/usr/bin/env") is 64-bit, so GDBserver gets the 64-bit
target description instead of 32-bit.
The root cause of this problem is that GDBserver creates target
description too early, and the rationale of fix could be creating
target description once the GDBserver skips extra traps and inferior
stops at the first instruction of the program we want to debug. IOW,
when GDBserver skips extra traps, the inferior's tdesc is NULL, and
mywait and its callees shouldn't use inferior's tdesc, so in this
patch, we skip code that requires register access, see changes in
linux_resume_one_lwp_throw and need_step_over_p.
In linux_low_filter_event, if target description isn't initialised and
GDBserver attached the process, we create target description immediately,
because GDBserver don't have to skip extra traps for attach, IOW, it
makes no sense to use --attach and --wrapper together. Otherwise, the
process is launched by GDBserver, we keep the status pending, and return.
After GDBserver skipped extra traps in start_inferior, we call a
target_ops hook arch_setup to initialise target description there.
gdb/gdbserver:
2015-07-24 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_arch_setup): New function.
(linux_low_filter_event): If proc->tdesc is NULL and
proc->attached is true, call the_low_target.arch_setup.
Otherwise, keep status pending, and return.
(linux_resume_one_lwp_throw): Don't call get_pc if
thread->while_stepping isn't NULL. Don't call
get_thread_regcache if proc->tdesc is NULL.
(need_step_over_p): Return 0 if proc->tdesc is NULL.
(linux_target_ops): Install arch_setup.
* server.c (start_inferior): Call the_target->arch_setup.
* target.h (struct target_ops) <arch_setup>: New field.
(target_arch_setup): New marco.
* lynx-low.c (lynx_target_ops): Update.
* nto-low.c (nto_target_ops): Update.
* spu-low.c (spu_target_ops): Update.
* win32-low.c (win32_target_ops): Update.
Nowadays, we set proc->priv->new_inferior to 1 inside linux_add_process,
and new_inferior is used as a flag to initialise target description later.
linux_add_process is used for the three cases, fork/vfork event
(handle_extended_wait), run the program (linux_create_inferior), and
attach to the process (linux_attach). In the first case, the child's
target description is copied from parent's, so we don't need to initialise
target description again later, which means we don't need to set
proc->priv->new_inferior to 1 in this case. For the rest of two cases,
we need this flag.
This patch move the code setting proc->priv->new_inferior to 1 inside
linux_add_process to linux_create_inferior and linux_attach. No
functionality is changed.
gdb/gdbserver:
2015-07-24 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_add_process): Don't set
proc->priv->new_inferior.
(linux_create_inferior): Set proc->priv->new_inferior to 1.
(linux_attach): Likewise.
This patch is to refactor function start_inferior that signal_pid
is return in one place.
gdb/gdbserver:
2015-07-24 Yao Qi <yao.qi@linaro.org>
* server.c (start_inferior): Code refactor.
When I run gdb.server/ext-restart.exp, I get the following GDB internal
error,
run^M
The program being debugged has been started already.^M
Start it from the beginning? (y or n) y^M
Sending packet: $vKill;53c5#3d...Packet received: OK^M
Packet vKill (kill) is supported^M
Sending packet: $vFile:close:6#b6...Packet received: F0^M
Sending packet: $vFile:close:3#b3...Packet received: F0^M
Starting program: /scratch/yao/gdb/build-git/x86_64/gdb/testsuite/gdb.server/ext-restart ^M
Sending packet: $QDisableRandomization:1#cf...Packet received: OK^M
Sending packet: $R0#82...Sending packet: $qC#b4...Packet received: QCp53c5.53c5^M <-- [1]
Sending packet: $qAttached:53c5#c9...Packet received: E01^M
warning: Remote failure reply: E01^M
....
0x00002aaaaaaac2d0 in ?? () from target:/lib64/ld-linux-x86-64.so.2^M
/home/yao/SourceCode/gnu/gdb/git/gdb/thread.c:88: internal-error: inferior_thread: Assertion `tp' failed.^M
A problem internal to GDB has been detected,^M
further debugging may prove unreliable.^M
Quit this debugging session? (y or n) FAIL: gdb.server/ext-restart.exp: run to main (GDB internal error)
Resyncing due to internal error.
the test is to restart the program, to make sure GDBserver handles
packet 'R' correctly. From the GDBserver output, we can see,
Remote debugging from host 127.0.0.1^M
Process /scratch/yao/gdb/build-git/x86_64/gdb/testsuite/gdb.server/ext-restart created; pid = 21445^M
GDBserver restarting^M
Process /scratch/yao/gdb/build-git/x86_64/gdb/testsuite/gdb.server/ext-restart created; pid = 21446^M
Killing process(es): 21446
we first start process 21445(0x53c5), kill it and restart a new process
21446. However, in the gdb output above [1], we can see that the reply
of qC is still the old process id rather than the new one. Looks
general_thread isn't up to date after GDBserver receives R packet.
This patch is to update general_thread after call start_inferior.
gdb/gdbserver:
2015-07-24 Yao Qi <yao.qi@linaro.org>
* server.c (process_serial_event): Set general_thread.
gdb/testsuite:
2015-07-24 Yao Qi <yao.qi@linaro.org>
* gdb.server/ext-restart.exp: New file.
There are also some duplication on getting HW watchpoint/breakpoint
registers info between GDB and GDBserver. This patch moves them
to nat/aarch64-linux-hw-point.c.
Note that ENABLE_NLS is not defined in GDBserver, so it should be OK
to use _( markup.
gdb:
2015-07-21 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity):
Move it to nat/aarch64-linux-hw-point.c.
(aarch64_linux_child_post_startup_inferior): Update.
* nat/aarch64-linux-hw-point.c (aarch64_linux_get_debug_reg_capacity):
New function.
* nat/aarch64-linux-hw-point.h (aarch64_linux_get_debug_reg_capacity):
Declare it.
gdb/gdbserver:
2015-07-21 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (aarch64_arch_setup): Remove code and call
aarch64_linux_get_debug_reg_capacity.
When I look at test fails related to watchpoint on aarch64-linux,
I find there are some code duplicates between GDB and GDBserver.
This patch is to move some of them to a nat/aarch64-linux-hw-point.{h,c}.
The only change I do is about the dr_changed_t typedef, which was
ULONGEST in GDB and 'unsigned long long' in GDBserver. Each bit
of dr_changed_t represents a status of each HW breakpoint or
watchpoint register, and the max number of HW breakpoint or watchpoint
registers is 16, so the width of 'unsigned long long' is sufficient.
gdb:
2015-07-17 Yao Qi <yao.qi@linaro.org>
* Makefile.in (HFILES_NO_SRCDIR): Add
nat/aarch64-linux-hw-point.h.
(aarch64-linux-hw-point.o): New rule.
* nat/aarch64-linux-hw-point.h: New file.
* nat/aarch64-linux-hw-point.c: New file.
* aarch64-linux-nat.c: Include nat/aarch64-linux-hw-point.h.
(AARCH64_HBP_MAX_NUM): Move to nat/aarch64-linux-hw-point.h.
(AARCH64_HWP_MAX_NUM, AARCH64_HBP_ALIGNMENT): Likewise.
(AARCH64_HWP_ALIGNMENT): Likewise.
(AARCH64_HWP_MAX_LEN_PER_REG): Likewise.
(AARCH64_DEBUG_NUM_SLOTS, AARCH64_DEBUG_ARCH): Likewise.
(AARCH64_DEBUG_ARCH_V8, DR_MARK_ALL_CHANGED): Likewise.
(DR_MARK_N_CHANGED, DR_CLEAR_CHANGED): Likewise.
(DR_HAS_CHANGED, DR_N_HAS_CHANGE): Likewise.
(aarch64_num_bp_regs, aarch64_num_wp_regs): Likewise.
(struct aarch64_debug_reg_state): Likewise.
(struct arch_lwp_info): Likewise.
(aarch64_linux_set_debug_regs): Likewise.
(aarch64_notify_debug_reg_change): Remove static.
(aarch64_align_watchpoint): Likewise.
(DR_CONTROL_ENABLED, DR_CONTROL_LENGTH): Likewise.
(aarch64_watchpoint_length): Likewise.
(aarch64_point_encode_ctrl_reg): Likewise
(aarch64_point_is_aligned): Likewise.
(aarch64_dr_state_insert_one_point): Likewise.
(aarch64_dr_state_remove_one_point): Likewise.
(aarch64_handle_breakpoint): Likewise.
(aarch64_handle_aligned_watchpoint): Likewise.
(aarch64_handle_unaligned_watchpoint): Likewise.
(aarch64_handle_watchpoint): Likewise.
* config/aarch64/linux.mh (NAT_FILE): Add
aarch64-linux-hw-point.o.
gdb/gdbserver:
2015-07-17 Yao Qi <yao.qi@linaro.org>
* Makefile.in (aarch64-linux-hw-point.o): New rule.
* configure.srv (srv_tgtobj): Append aarch64-linux-hw-point.o.
* linux-aarch64-low.c: Include nat/aarch64-linux-hw-point.h.
(AARCH64_HBP_MAX_NUM): Move to nat/aarch64-linux-hw-point.h.
(AARCH64_HWP_MAX_NUM, AARCH64_HBP_ALIGNMENT): Likewise.
(AARCH64_HWP_ALIGNMENT): Likewise.
(AARCH64_HWP_MAX_LEN_PER_REG): Likewise.
(AARCH64_DEBUG_NUM_SLOTS, AARCH64_DEBUG_ARCH): Likewise.
(aarch64_num_bp_regs, aarch64_num_wp_regs): Likewise.
(AARCH64_DEBUG_ARCH_V8, DR_MARK_ALL_CHANGED): Likewise.
(DR_MARK_N_CHANGED, DR_CLEAR_CHANGED): Likewise.
(DR_HAS_CHANGED, DR_N_HAS_CHANGE): Likewise.
(struct aarch64_debug_reg_state): Likewise.
(struct arch_lwp_info): Likewise.
(aarch64_align_watchpoint): Likewise.
(DR_CONTROL_ENABLED, DR_CONTROL_LENGTH): Likewise.
(aarch64_watchpoint_length): Likewise.
(aarch64_point_encode_ctrl_reg): Likewise
(aarch64_point_is_aligned): Likewise.
(aarch64_align_watchpoint): Likewise.
(aarch64_linux_set_debug_regs):
(aarch64_dr_state_insert_one_point): Likewise.
(aarch64_dr_state_remove_one_point): Likewise.
(aarch64_handle_breakpoint): Likewise.
(aarch64_handle_aligned_watchpoint): Likewise.
(aarch64_handle_unaligned_watchpoint): Likewise.
(aarch64_handle_watchpoint): Likewise.
Some functions on handling HW watchpoint in GDB and GDBserver looks the
same except the code getting debug register state from current inferior.
In GDB, we get debug register state like this:
state = aarch64_get_debug_reg_state (ptid_get_pid (inferior_ptid));
while in GDBserver, we get debug register state like this:
state = aarch64_get_debug_reg_state ();
This patch is to move two lines above out of some functions, and pass
aarch64_debug_reg_state to these functions, in this way, these functions
are the same, and can be moved to a common place.
gdb:
2015-07-17 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-nat.c (aarch64_handle_breakpoint): Add argument
state and don't call aarch64_get_debug_reg_state. All callers
update.
(aarch64_linux_insert_hw_breakpoint): Call
aarch64_get_debug_reg_state earlier.
(aarch64_linux_remove_hw_breakpoint): Likewise.
(aarch64_handle_aligned_watchpoint): Add argument state and
don't call aarch64_get_debug_reg_state. All callers update.
(aarch64_handle_unaligned_watchpoint): Likewise.
(aarch64_handle_watchpoint): Add argument state.
(aarch64_linux_insert_watchpoint): Call aarch64_get_debug_reg_state
earlier.
(aarch64_linux_remove_watchpoint): Likewise.
gdb/gdbserver:
2015-07-17 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (aarch64_handle_breakpoint): Add argument state
and don't aarch64_get_debug_reg_state. All callers update.
(aarch64_handle_aligned_watchpoint): Likewise.
(aarch64_handle_unaligned_watchpoint): Likewise.
(aarch64_handle_watchpoint): Likewise.
(aarch64_insert_point): Call aarch64_get_debug_reg_state earlier.
(aarch64_remove_point): Likewise.
Some functions in aarch64-linux-nat.c and linux-aarch64-low.c looks
the same except for the code printing debug message. In GDB, we use
fprintf_unfiltered (gdb_stdlog, ...) while in GDBserver, we use
fprintf (stderr, ...). This patch is to change them to use debug_printf
so that these functions are the same, and I can move them to a common
place in the following patch.
gdb:
2015-07-17 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-nat.c (aarch64_show_debug_reg_state): Use
debug_printf.
(aarch64_handle_unaligned_watchpoint): Likewise.
gdb/gdbserver:
2015-07-17 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (aarch64_show_debug_reg_state): Use
debug_printf.
(aarch64_handle_unaligned_watchpoint): Likewise.
Producer part of the new "build-id" XML attribute.
gdb/ChangeLog
2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
Jan Kratochvil <jan.kratochvil@redhat.com>
gdbserver build-id attribute generator.
* features/library-list-svr4.dtd (library-list-svr4): New
'build-id' attribute.
gdb/doc/ChangeLog
2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
Jan Kratochvil <jan.kratochvil@redhat.com>
gdbserver build-id attribute generator.
* gdb.texinfo (Library List Format for SVR4 Targets): Add
'build-id' in description, example, new attribute in dtd.
gdb/gdbserver/ChangeLog
2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
Jan Kratochvil <jan.kratochvil@redhat.com>
gdbserver build-id attribute generator.
* linux-low.c (nat/linux-maps.h, search.h, rsp-low.h): Include.
(ElfXX_Ehdr, ElfXX_Phdr, ElfXX_Nhdr): New.
(ELFXX_FLD, ELFXX_SIZEOF, ELFXX_ROUNDUP, BUILD_ID_INVALID): New.
(find_phdr): New.
(get_dynamic): Use find_pdhr to traverse program headers.
(struct mapping_entry, mapping_entry_s, free_mapping_entry_vec)
(compare_mapping_entry_range, struct find_memory_region_callback_data)
(read_build_id, find_memory_region_callback, lrfind_mapping_entry)
(get_hex_build_id): New.
(linux_qxfer_libraries_svr4): Add optional build-id attribute
to reply XML document.
This should be just a move with no changes.
gdb/ChangeLog
2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
Jan Kratochvil <jan.kratochvil@redhat.com>
Move linux_find_memory_regions_full & co.
* linux-tdep.c (nat/linux-maps.h): Include.
(gdb_regex.h): Remove the include.
(enum filterflags, struct smaps_vmflags, read_mapping, decode_vmflags)
(mapping_is_anonymous_p, dump_mapping_p): Moved to nat/linux-maps.c.
(linux_find_memory_region_ftype): Moved typedef to nat/linux-maps.h.
(linux_find_memory_regions_full): Moved definition to nat/linux-maps.c.
* nat/linux-maps.c: Include ctype.h, target/target-utils.h, gdb_regex.h
and target/target.h.
(struct smaps_vmflags, read_mapping, decode_vmflags)
(mapping_is_anonymous_p, dump_mapping_p): Move from linux-tdep.c.
(linux_find_memory_regions_full): Move from linux-tdep.c.
* nat/linux-maps.h (read_mapping): New declaration.
(linux_find_memory_region_ftype, enum filterflags): Moved from
linux-tdep.c.
(linux_find_memory_regions_full): New declaration.
* target.c (target/target-utils.h): Include.
(read_alloc_pread_ftype): Moved typedef to target/target-utils.h.
(read_alloc, read_stralloc_func_ftype, read_stralloc): Moved
definitions to target/target-utils.c.
* target.h (target_fileio_read_stralloc): Move it to target/target.h.
* target/target-utils.c (read_alloc, read_stralloc): Move definitions
from target.c.
* target/target-utils.h (read_alloc_pread_ftype): New typedef.
(read_alloc): New declaration.
(read_stralloc_func_ftype): New typedef.
(read_stralloc): New declaration.
* target/target.h (target_fileio_read_stralloc): Move it from target.h.
gdb/gdbserver/ChangeLog
2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
Jan Kratochvil <jan.kratochvil@redhat.com>
* target.c: Include target/target-utils.h and fcntl.h.
(target_fileio_read_stralloc_1_pread, target_fileio_read_stralloc_1)
(target_fileio_read_stralloc): New functions.
Later patches need regex support also in gdbserver.
gdb/ChangeLog
2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Change gdb_regex.h to
common/gdb_regex.h.
(COMMON_OBS): Add gdb_regex.o.
(gdb_regex.o): New.
* common/common.m4 (GDB_AC_COMMON): Add gdb_use_included_regex,
--without-included-regex and USE_INCLUDED_REGEX.
* common/gdb_regex.c: New file from utils.c functions.
* common/gdb_regex.h: Move it here from gdb_regex.h, update include
file wrapping define name.
* configure: Rebuilt.
* configure.ac (gdb_use_included_regex, --without-included-regex)
(USE_INCLUDED_REGEX): Move them to common/common.m4.
* gdb_regex.h: Move it to common/gdb_regex.h.
* utils.c: Remove include gdb_regex.h.
(do_regfree_cleanup, make_regfree_cleanup, get_regcomp_error)
(compile_rx_or_error): Move them to common/gdb_regex.c.
gdb/gdbserver/ChangeLog
2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com>
* Makefile.in (OBS): Add gdb_regex.o.
(gdb_regex.o): New.
* config.in: Rebuilt.
* configure: Rebuilt.
If the process disappears (e.g., killed with "kill -9" from the shell)
while it was stopped under GDBserver's control, and the GDBserver
tries to kill it, GDBserver asserts:
(gdb) shell kill -9 23084
(gdb) kill
...
Killing process(es): 23084
/home/pedro/gdb/mygit/src/gdb/gdbserver/linux-low.c:972: A problem internal to GDBserver has been detected.
kill_wait_lwp: Assertion `res > 0' failed.
...
gdb/gdbserver/ChangeLog:
2015-07-14 Pedro Alves <palves@redhat.com>
* linux-low.c (kill_wait_lwp): Don't assert if waitpid fails.
Instead, ignore ECHILD, and throw an error for other errnos.
Building with C++ catches a buglet here:
../../../src/gdb/gdbserver/event-loop.c:205:19: warning: invalid conversion from ‘gdb_client_data {aka void*}’ to ‘void**’ [-fpermissive]
event_ptr->data = data;
^
This works in practice because gdb_client_data is a pointer already
(hence in C we get an implicit conversion), and nothing deferences the
pointer. It's passed from client at event registration/creation time,
only to pass straight back to client callback.
Well, that and nothing in gdbserver uses the event data anyway.
gdb/gdbserver/ChangeLog:
2015-07-10 Pedro Alves <palves@redhat.com>
* event-loop.c (struct callback_event) <data>: Change type to
gdb_client_data instance instead of gdb_client_data pointer.
(append_callback_event): Adjust.
This patch cleans up the comments for each linux_target_ops methods. We
should mention which method each function implements but there is no
need to duplicate information already mentionned in the base target_ops
or linux_target_ops definitions.
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c: Add comments for each linux_target_ops
method. Remove comments already covered in target_ops and
linux_target_ops definitions.
(the_low_target): Add comments for each unimplemented method.
Hi,
I happen to read the comments in regs_info below,
struct regs_info
{
...
/* Info used when accessing registers with PTRACE_PEEKUSER /
PTRACE_POKEUSER. This can be NULL if all registers are
transferred with regsets .*/
struct usrregs_info *usrregs;
that usrregs can be NULL if all registers are transferred with
regsets, which is exactly what aarch64-linux does. This patch
is to set usrregs to NULL in regs_info and remove
aarch64_usrregs_info and aarch64_regmap.
gdb/gdbserver:
2015-07-09 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (aarch64_regmap): Remove.
(aarch64_usrregs_info): Remove.
(regs_info): Set field usrregs to NULL.
Adds a new command "record btrace pt" to configure the kernel to use
Intel(R) Processor Trace instead of Branch Trace Strore.
The "record btrace" command chooses the tracing format automatically.
Intel(R) Processor Trace support requires Linux 4.1 and libipt.
gdb/
* NEWS: Announce new commands "record btrace pt" and "record pt".
Announce new options "set|show record btrace pt buffer-size".
* btrace.c: Include "rsp-low.h".
Include "inttypes.h".
(btrace_add_pc): Add forward declaration.
(pt_reclassify_insn, ftrace_add_pt, btrace_pt_readmem_callback)
(pt_translate_cpu_vendor, btrace_finalize_ftrace_pt)
(btrace_compute_ftrace_pt): New.
(btrace_compute_ftrace): Support BTRACE_FORMAT_PT.
(check_xml_btrace_version): Update version check.
(parse_xml_raw, parse_xml_btrace_pt_config_cpu)
(parse_xml_btrace_pt_raw, parse_xml_btrace_pt)
(btrace_pt_config_cpu_attributes, btrace_pt_config_children)
(btrace_pt_children): New.
(btrace_children): Add support for "pt".
(parse_xml_btrace_conf_pt, btrace_conf_pt_attributes): New.
(btrace_conf_children): Add support for "pt".
* btrace.h: Include "intel-pt.h".
(btrace_pt_error): New.
* common/btrace-common.c (btrace_format_string, btrace_data_fini)
(btrace_data_empty): Support BTRACE_FORMAT_PT.
* common/btrace-common.h (btrace_format): Add BTRACE_FORMAT_PT.
(struct btrace_config_pt): New.
(struct btrace_config)<pt>: New.
(struct btrace_data_pt_config, struct btrace_data_pt): New.
(struct btrace_data)<pt>: New.
* features/btrace-conf.dtd (btrace-conf)<pt>: New.
(pt): New.
* features/btrace.dtd (btrace)<pt>: New.
(pt, pt-config, cpu): New.
* nat/linux-btrace.c (perf_event_read, perf_event_read_all)
(perf_event_pt_event_type, kernel_supports_pt)
(linux_supports_pt): New.
(linux_supports_btrace): Support BTRACE_FORMAT_PT.
(linux_enable_bts): Free tinfo on error.
(linux_enable_pt): New.
(linux_enable_btrace): Support BTRACE_FORMAT_PT.
(linux_disable_pt): New.
(linux_disable_btrace): Support BTRACE_FORMAT_PT.
(linux_fill_btrace_pt_config, linux_read_pt): New.
(linux_read_btrace): Support BTRACE_FORMAT_PT.
* nat/linux-btrace.h (struct btrace_tinfo_pt): New.
(struct btrace_target_info)<pt>: New.
* record-btrace.c (set_record_btrace_pt_cmdlist)
(show_record_btrace_pt_cmdlist): New.
(record_btrace_print_pt_conf): New.
(record_btrace_print_conf): Support BTRACE_FORMAT_PT.
(btrace_ui_out_decode_error): Support BTRACE_FORMAT_PT.
(cmd_record_btrace_pt_start): New.
(cmd_record_btrace_start): Support BTRACE_FORMAT_PT.
(cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): New.
(_initialize_record_btrace): Add new commands.
* remote.c (PACKET_Qbtrace_pt, PACKET_Qbtrace_conf_pt_size): New.
(remote_protocol_features): Add "Qbtrace:pt".
Add "Qbtrace-conf:pt:size".
(remote_supports_btrace): Support BTRACE_FORMAT_PT.
(btrace_sync_conf): Support PACKET_Qbtrace_conf_pt_size.
(remote_enable_btrace): Support BTRACE_FORMAT_PT.
(_initialize_remote): Add new commands.
gdbserver/
* linux-low.c: Include "rsp-low.h"
(linux_low_encode_pt_config, linux_low_encode_raw): New.
(linux_low_read_btrace): Support BTRACE_FORMAT_PT.
(linux_low_btrace_conf): Support BTRACE_FORMAT_PT.
(handle_btrace_enable_pt): New.
(handle_btrace_general_set): Support "pt".
(handle_btrace_conf_general_set): Support "pt:size".
doc/
* gdb.texinfo (Process Record and Replay): Spell out that variables
and registers are not available during btrace replay.
Describe the new "record btrace pt" command.
Describe the new "set|show record btrace pt buffer-size" options.
(General Query Packets): Describe the new Qbtrace:pt and
Qbtrace-conf:pt:size packets.
Expand "bts" to "Branch Trace Store".
Update the branch trace DTD.
This patch lets GDBServer handle software breakpoints instead of relying
on GDB.
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (aarch64_supports_z_point_type): Enable for
Z_PACKET_SW_BP.
GDB uses a "brk #0" instruction to perform a software breakpoint while
GDBServer uses an illegal instruction. Both instructions should match.
When enabling support for the 'Z0' packet, we let GDBServer insert the
breakpoint instruction instead of GDB. And in case of permanent
breakpoints for example, GDB will check if a breakpoint is inserted in the
inferior with `program_breakpoint_here_p (gdbarch, address)', and
compare the instruction read from the inferior with the breakpoint
instruction.
On AArch64, instructions are always little endian so we need to
represent it as an array of bytes, as done in aarch64-tdep.c.
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c: Remove comment about endianness.
(aarch64_breakpoint): Change type to gdb_byte[]. Set to "brk #0".
(aarch64_breakpoint_at): Change type of insn to gdb_byte[]. Use
memcmp.
stdint.h was added to common-defs.h some months ago and should
no longer be included directly by any file.
gdb_assert.h was added to common-defs.h nearly a year ago, but
three includes have crept in since then.
This commit removes all such redundant include directives.
gdb/ChangeLog:
* common/buffer.c (stdint.h): Do not include.
* common/print-utils.c (stdint.h): Likewise.
* compile/compile-c-symbols.c (gdb_assert.h): Likewise.
* compile/compile-c-types.c (gdb_assert.h): Likewise.
* ft32-tdep.c (gdb_assert.h): Likewise.
* guile/scm-utils.c (stdint.h): Likewise.
* i386-linux-tdep.c (stdint.h): Likewise.
* i386-tdep.c (stdint.h): Likewise.
* nat/linux-btrace.c (stdint.h): Likewise.
* nat/linux-btrace.h (stdint.h): Likewise.
* nat/linux-ptrace.c (stdint.h): Likewise.
* nat/mips-linux-watch.h (stdint.h): Likewise.
* ppc-linux-nat.c (stdint.h): Likewise.
* python/python-internal.h (stdint.h): Likewise.
* stub-termcap.c (stdlib.h): Likewise.
* target/target.h (stdint.h): Likewise.
* xtensa-linux-nat.c (stdint.h): Likewise.
gdb/gdbserver/ChangeLog:
* linux-i386-ipa.c (stdint.h): Do not include.
* lynx-i386-low.c (stdint.h): Likewise.
* lynx-ppc-low.c (stdint.h): Likewise.
* mem-break.c (stdint.h): Likewise.
* thread-db.c (stdint.h): Likewise.
* tracepoint.c (stdint.h): Likewise.
* win32-low.c (stdint.h): Likewise.
Adapt code in remote.c to take into account addressable unit size when
reading/writing memory.
A few variables are renamed and suffixed with _bytes or _units. This
way, it's more obvious if there is any place where we add or compare
values of different kinds (which would be a mistake).
gdb/ChangeLog:
* common/rsp-low.c (needs_escaping): New.
(remote_escape_output): Add unit_size parameter. Refactor to
support multi-byte addressable units. Rename parameters.
* common/rsp-low.h (remote_escape_output): Add unit_size
parameter and rename others. Update doc.
* remote.c (align_for_efficient_write): New.
(remote_write_bytes_aux): Add unit_size parameter and use it.
Rename some variables. Update doc.
(remote_xfer_partial): Get unit size and use it.
(remote_read_bytes_1): Add unit_size parameter and use it.
Rename some variables. Update doc.
(remote_write_bytes): Same.
(remote_xfer_live_readonly_partial): Same.
(remote_read_bytes): Same.
(remote_flash_write): Update call to remote_write_bytes_aux.
(remote_write_qxfer): Update call to remote_escape_output.
(remote_search_memory): Same.
(remote_hostio_pwrite): Same.
gdb/gdbserver/ChangeLog:
* server.c (write_qxfer_response): Update call to
remote_escape_output.
While reimplementing <library-list/> I found from expat-2.0.1-11.fc15.x86_64:
warning: while parsing target library list (at line 1): Required attribute "version" of <library-list-svr4> not specified
I believe the same bug has to apply for existing FSF gdbserver but I do not
have any <library-list/> platform to test it (I did not try to build MinGW).
features/library-list.dtd:
<!ATTLIST library-list version CDATA #FIXED "1.0">
http://www.xml.com/pub/a/98/10/guide0.html?page=3 says:
In this case, the attribute is not required, but if it occurs, it must
have the specified value.
Which would suggest gdbserver is right but solib-target.c is wrong. One could
also make gdbserver explicit for the version (if those 14 bytes are not of
a concern).
gdb/ChangeLog
2015-06-10 Jan Kratochvil <jan.kratochvil@redhat.com>
* solib-target.c (library_list_start_list): Do not dereference
variable version in its initialization. Make the VERSION check handle
NULL.
(library_list_attributes): Make "version" GDB_XML_AF_OPTIONAL.
gdb/gdbserver/ChangeLog
2015-06-10 Jan Kratochvil <jan.kratochvil@redhat.com>
* server.c (handle_qxfer_libraries): Set `version' attribute for
<library-list>.
This commit implements the "vFile:setfs" packet in gdbserver.
gdb/gdbserver/ChangeLog:
* target.h (struct target_ops) <multifs_open>: New field.
<multifs_unlink>: Likewise.
<multifs_readlink>: Likewise.
* linux-low.c (nat/linux-namespaces.h): New include.
(linux_target_ops): Initialize the_target->multifs_open,
the_target->multifs_unlink and the_target->multifs_readlink.
* hostio.h (hostio_handle_new_gdb_connection): New declaration.
* hostio.c (hostio_fs_pid): New static variable.
(hostio_handle_new_gdb_connection): New function.
(handle_setfs): Likewise.
(handle_open): Use the_target->multifs_open as appropriate.
(handle_unlink): Use the_target->multifs_unlink as appropriate.
(handle_readlink): Use the_target->multifs_readlink as
appropriate.
(handle_vFile): Handle vFile:setfs packets.
* server.c (handle_query): Call hostio_handle_new_gdb_connection
after target_handle_new_gdb_connection.
inf_child_fileio_open and its gdbserver equivalent both assume that
the mode_t bits defined in gdb/fileio.h are the same as those used
by the open system call, but there is no mechanism to ensure this is
the case. This commit adds a conversion function to handle systems
where the File-I/O definitions do not align with the host's.
gdb/ChangeLog:
* common/fileio.h (fileio_to_host_mode): New declaration.
* common/fileio.c (fileio_to_host_mode): New Function.
* inf-child.c (inf_child_fileio_open): Process mode argument
with fileio_to_host_mode.
gdb/gdbserver/ChangeLog:
* hostio.c (handle_open): Process mode argument with
fileio_to_host_mode.
Macros PTRACE_GETREGSET and PTRACE_SETREGSET are defined locally in
some places in GDB and GDBserver. This patch is to move them to
nat/linux-ptrace.h to avoid duplication.
gdb:
2015-06-01 Yao Qi <yao.qi@linaro.org>
* amd64-linux-nat.c: Include "nat/linux-ptrace.h".
* i386-linux-nat.c: Likewise.
* nat/linux-ptrace.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Define.
* s390-linux-nat.c: Include "nat/linux-ptrace.h".
(PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
* x86-linux-nat.c: Include "nat/linux-ptrace.h".
* x86-linux-nat.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
gdb/gdbserver:
2015-06-01 Yao Qi <yao.qi@linaro.org>
* linux-s390-low.c (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
* linux-x86-low.c: Likewise.
This patch fixes some intermittent test failures in
gdb.base/foll-vfork.exp where a vfork child would be (incorrectly)
resumed when handling the vfork event. In this case the result
was a subsequent event reported to the client side as a SIGTRAP
delivered to the as-yet-unknown child thread.
The new thread was resumed (incorrectly) in linux-low.c when
resume_stopped_resumed_lwps was called from
linux_wait_for_event_filtered after the vfork event had been
handled in handle_extended_wait.
Gdbserver/linux-low.c's add_thread function creates threads with
last_resume_kind == resume_continue by default. This field is
used by resume_stopped_resumed_lwps to decide whether to perform
the resume:
static void
resume_stopped_resumed_lwps (struct inferior_list_entry *entry) {
struct thread_info *thread = (struct thread_info *) entry;
struct lwp_info *lp = get_thread_lwp (thread);
if (lp->stopped
&& !lp->status_pending_p
&& thread->last_resume_kind != resume_stop
&& thread->last_status.kind == TARGET_WAITKIND_IGNORE)
{
So the fix is to make sure to set thread->last_resume_kind to
resume_stop. Here we do that for new fork children in
gdbserver/linux-low.c:handle_extended_wait.
In addition, it seemed prudent to initialize lwp_info.status_pending_p
for the new fork child. I also rearranged the initialization code
so that all of the lwp_info initialization was together, rather than
intermixed with thread_info and process_info initialization.
Tested native, native-gdbserver, native-extended-gdbserver on
x86_64 GNU/Linux.
gdb/gdbserver/
* linux-low.c (handle_extended_wait): Initialize
thread_info.last_resume_kind for new fork children.
Fixes:
In file included from ../../../binutils-gdb/gdb/gdbserver/server.h:61:0,
from ../../../binutils-gdb/gdb/gdbserver/server.c:19:
../../../binutils-gdb/gdb/gdbserver/target.h:442:50: error: second operand to the conditional operator is of type 'void', but the third operand is neither a throw-expression nor of type 'void'
(*the_target->handle_new_gdb_connection) () : 0)
^
Reported by Yuanhui Zhang.
gdb/gdbserver/ChangeLog:
2015-05-15 Pedro Alves <palves@redhat.com>
* target.h (target_handle_new_gdb_connection): Rewrite using if
wrapped in do/while.
Fix build errors introduced by
https://sourceware.org/ml/gdb-patches/2015-05/msg00281.html, which
didn't account for the change of the name of the struct process_info
field 'private' to 'priv' made in
https://sourceware.org/ml/gdb-patches/2015-02/msg00829.html.
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (aarch64_linux_new_fork): Change reference
to process_info.private to process_info.priv.
* linux-arm-low.c (arm_new_fork): Likewise.
* linux-mips-low.c (mips_linux_new_fork): Likewise.
The following patch...
| proc-service, extern "C"
|
| libthread_db.so calls symbols in the client (GDB), through the
| proc-service interface. These routines must have extern "C" linkage
| so their symbol names are not mangled when GDB is built as a C++
| program. On the GDBserver side, we were missing fallback declarations for
| all these symbols.
|
| gdb/ChangeLog:
|
| * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
|
| gdb/gdbserver/ChangeLog:
| 2015-02-27 Pedro Alves <palves@redhat.com>
|
| * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
| [!HAVE_PROC_SERVICE_H] (struct ps_prochandle): Forward declare.
| [!HAVE_PROC_SERVICE_H] (ps_pdread, ps_pdwrite, ps_ptread)
| ps_ptwrite, ps_lgetregs, ps_lsetregs, ps_lgetfpregs)
| (ps_lsetfpregs, ps_getpid)
| (ps_get_thread_area, ps_pglobal_lookup, ps_pstop, ps_pcontinue)
| (ps_lstop, ps_lcontinue, ps_lgetxregsize, ps_lgetxregs)
| (ps_lsetxregs, ps_plog): Declare.
... added a number of declarations which do not compile when cross-
compiling GDBserver on arm-android. The problem comes from type
prfpregset_t not being declared:
/[...]/gdbserver/gdb_proc_service.h:98:47:
error: unknown type name 'prfpregset_t'
After searching through the includes of the install we have,
I could not find that type being declared anywhere. So I did
the same as for prgregset_t, and created the typedef if the
type isn't declared.
gdb/gdbserver/ChangeLog:
* configure.ac: Add prfpregset_t BFD_HAVE_SYS_PROCFS_TYPE check.
* configure, config.in: Regenerate.
* gdb_proc_service.h [HAVE_PRFPREGSET_T] (prfpregset_t):
Declare typedef.
This patch implements follow-fork for vfork on extended-remote Linux targets.
The implementation follows the native implementation as much as possible.
Most of the work is done on the GDB side in the existing code now in
infrun.c. GDBserver just has to report the events and do a little
bookkeeping.
Implementation includes:
* enabling VFORK events by adding ptrace options for VFORK and VFORK_DONE
to linux-low.c:linux_low_ptrace_options.
* handling VFORK and VFORK_DONE events in linux-low.c:handle_extended_wait
and reporting them to GDB.
* including VFORK and VFORK_DONE events in the predicate
linux-low.c:extended_event_reported.
* adding support for VFORK and VFORK_DONE events in RSP by adding stop
reasons "vfork" and "vforkdone" to the 'T' Stop Reply Packet in both
gdbserver/remote-utils.c and gdb/remote.c.
Tested on x64 Ubuntu Lucid, native, remote, extended-remote.
gdb/gdbserver/ChangeLog:
* linux-low.c (handle_extended_wait): Handle PTRACE_EVENT_FORK and
PTRACE_EVENT_VFORK_DONE.
(linux_low_ptrace_options, extended_event_reported): Add vfork
events.
* remote-utils.c (prepare_resume_reply): New stop reasons "vfork"
and "vforkdone" for RSP 'T' Stop Reply Packet.
* server.h (report_vfork_events): Declare
global variable.
gdb/ChangeLog:
* remote.c (remove_vfork_event_p): New function.
(remote_follow_fork): Add vfork event type to event checking.
(remote_parse_stop_reply): New stop reasons "vfork" and
"vforkdone" for RSP 'T' Stop Reply Packet.
This patch implements the architecture-specific pieces of follow-fork
for remote and extended-remote Linux targets, which in the current
implementation copyies the parent's debug register state into the new
child's data structures. This is required for x86, arm, aarch64, and
mips.
This follows the native implementation as closely as possible by
implementing a new linux_target_ops function 'new_fork', which is
analogous to 'linux_nat_new_fork' in linux-nat.c. In gdbserver, the debug
registers are stored in the process list, instead of an
architecture-specific list, so the function arguments are process_info
pointers instead of an lwp_info and a pid as in the native implementation.
In the MIPS implementation the debug register mirror is stored differently
from x86, ARM, and aarch64, so instead of doing a simple structure assignment
I had to clone the list of watchpoint structures.
Tested using gdb.threads/watchpoint-fork.exp on x86, and ran manual tests
on a MIPS board and an ARM board. Aarch64 hasn't been tested.
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (aarch64_linux_new_fork): New function.
(the_low_target) <new_fork>: Initialize new member.
* linux-arm-low.c (arm_new_fork): New function.
(the_low_target) <new_fork>: Initialize new member.
* linux-low.c (handle_extended_wait): Call new target function
new_fork.
* linux-low.h (struct linux_target_ops) <new_fork>: New member.
* linux-mips-low.c (mips_add_watchpoint): New function
extracted from mips_insert_point.
(the_low_target) <new_fork>: Initialize new member.
(mips_linux_new_fork): New function.
(mips_insert_point): Call mips_add_watchpoint.
* linux-x86-low.c (x86_linux_new_fork): New function.
(the_low_target) <new_fork>: Initialize new member.
This patch implements basic support for follow-fork and detach-on-fork on
extended-remote Linux targets. Only 'fork' is supported in this patch;
'vfork' support is added n a subsequent patch. This patch depends on
the previous patches in the patch series.
Sufficient extended-remote functionality has been implemented here to pass
gdb.base/multi-forks.exp, as well as gdb.base/foll-fork.exp with the
catchpoint tests commented out. Some other fork tests fail with this
patch because it doesn't provide the architecture support needed for
watchpoint inheritance or fork catchpoints.
The implementation follows the same general structure as for the native
implementation as much as possible.
This implementation includes:
* enabling fork events in linux-low.c in initialize_low and
linux_enable_extended_features
* handling fork events in gdbserver/linux-low.c:handle_extended_wait
- when a fork event occurs in gdbserver, we must do the full creation
of the new process, thread, lwp, and breakpoint lists. This is
required whether or not the new child is destined to be
detached-on-fork, because GDB will make target calls that require all
the structures. In particular we need the breakpoint lists in order
to remove the breakpoints from a detaching child. If we are not
detaching the child we will need all these structures anyway.
- as part of this event handling we store the target_waitstatus in a new
member of the parent lwp_info structure, 'waitstatus'. This
is used to store extended event information for reporting to GDB.
- handle_extended_wait is given a return value, denoting whether the
handled event should be reported to GDB. Previously it had only
handled clone events, which were never reported.
* using a new predicate in gdbserver to control handling of the fork event
(and eventually all extended events) in linux_wait_1. The predicate,
extended_event_reported, checks a target_waitstatus.kind for an
extended ptrace event.
* implementing a new RSP 'T' Stop Reply Packet stop reason: "fork", in
gdbserver/remote-utils.c and remote.c.
* implementing new target and RSP support for target_follow_fork with
target extended-remote. (The RSP components were actually defined in
patch 1, but they see their first use here).
- remote target routine remote_follow_fork, which just sends the 'D;pid'
detach packet to detach the new fork child cleanly. We can't just
call target_detach because the data structures for the forked child
have not been allocated on the host side.
Tested on x64 Ubuntu Lucid, native, remote, extended-remote.
gdb/gdbserver/ChangeLog:
* linux-low.c (handle_extended_wait): Implement return value,
rename argument 'event_child' to 'event_lwp', handle
PTRACE_EVENT_FORK, call internal_error for unrecognized event.
(linux_low_ptrace_options): New function.
(linux_low_filter_event): Call linux_low_ptrace_options,
use different argument fo linux_enable_event_reporting,
use return value from handle_extended_wait.
(extended_event_reported): New function.
(linux_wait_1): Call extended_event_reported and set
status to report fork events.
(linux_write_memory): Add pid to debug message.
(reset_lwp_ptrace_options_callback): New function.
(linux_handle_new_gdb_connection): New function.
(linux_target_ops): Initialize new structure member.
* linux-low.h (struct lwp_info) <waitstatus>: New member.
* lynx-low.c: Initialize new structure member.
* remote-utils.c (prepare_resume_reply): Implement stop reason
"fork" for "T" stop message.
* server.c (handle_query): Call handle_new_gdb_connection.
* server.h (report_fork_events): Declare global flag.
* target.h (struct target_ops) <handle_new_gdb_connection>:
New member.
(target_handle_new_gdb_connection): New macro.
* win32-low.c: Initialize new structure member.
gdb/ChangeLog:
* linux-nat.c (linux_nat_ptrace_options): New function.
(linux_init_ptrace, wait_lwp, linux_nat_filter_event):
Call linux_nat_ptrace_options and use different argument to
linux_enable_event_reporting.
(_initialize_linux_nat): Delete call to
linux_ptrace_set_additional_flags.
* nat/linux-ptrace.c (current_ptrace_options): Rename to
supported_ptrace_options.
(additional_flags): Delete variable.
(linux_check_ptrace_features): Use supported_ptrace_options.
(linux_test_for_tracesysgood, linux_test_for_tracefork):
Likewise, and remove additional_flags check.
(linux_enable_event_reporting): Change 'attached' argument to
'options'. Use supported_ptrace_options.
(ptrace_supports_feature): Change comment. Use
supported_ptrace_options.
(linux_ptrace_set_additional_flags): Delete function.
* nat/linux-ptrace.h (linux_ptrace_set_additional_flags):
Delete function prototype.
* remote.c (remote_fork_event_p): New function.
(remote_detach_pid): New function.
(remote_detach_1): Call remote_detach_pid, don't mourn inferior
if doing detach-on-fork.
(remote_follow_fork): New function.
(remote_parse_stop_reply): Handle new "T" stop reason "fork".
(remote_pid_to_str): Print "process" strings for pid/0/0 ptids.
(init_extended_remote_ops): Initialize to_follow_fork.
This patch implements gdbserver routines to clone the breakpoint lists of a
process, duplicating them for another process. In gdbserver, each process
maintains its own independent breakpoint list. When a fork call creates a
child, all of the breakpoints currently inserted in the parent process are
also inserted in the child process, but there is nothing to describe them
in the data structures related to the child. The child must have a
breakpoint list describing them so that they can be removed (if detaching)
or recognized (if following). Implementation is a mechanical process of
just cloning the lists in several new functions in gdbserver/mem-break.c.
Tested by building, since none of the new functions are called yet. This
was tested with another patch in the series that implements follow-fork.
gdb/gdbserver/ChangeLog:
* mem-break.c (APPEND_TO_LIST): Define macro.
(clone_agent_expr): New function.
(clone_one_breakpoint): New function.
(clone_all_breakpoints): New function.
* mem-break.h: Declare new functions.
Pedro Alves
Yao Qi
Simon Marchi
H.J. Lu
Jan Kratochvil
Pierre Langlois
Markus Metzger
Gary Benson
Don Breazeal
Joel Brobecker