2015-07-30 Sandra Loosemore <sandra@codesourcery.com>
gdb/
* nios2-tdep.c (nios2_analyze_prologue): Update comments to
reflect how current GCC emits stack overflow checks. Match
both trap and break instructions for backward compatibility.
Disallow other trap and break instructions in the prologue.
Running gdb.threads/fork-plus-threads.exp against gdbserver in
extended-remote mode, even though the test passes, we still see broken
behavior:
(gdb) PASS: gdb.threads/fork-plus-threads.exp: set detach-on-fork off
continue &
Continuing.
(gdb) PASS: gdb.threads/fork-plus-threads.exp: continue &
[New Thread 28092.28092]
[Thread 28092.28092] #2 stopped.
[New Thread 28094.28094]
[Inferior 2 (process 28092) exited normally]
[New Thread 28094.28105]
[New Thread 28094.28109]
...
[Thread 28174.28174] #18 stopped.
[New Thread 28185.28185]
[Inferior 10 (process 28174) exited normally]
[New Thread 28185.28196]
[Thread 28185.28185] #20 stopped.
Cannot remove breakpoints because program is no longer writable.
Further execution is probably impossible.
[Inferior 11 (process 28185) exited normally]
[Inferior 1 (process 28091) exited normally]
PASS: gdb.threads/fork-plus-threads.exp: reached breakpoint
info threads
No threads.
(gdb) PASS: gdb.threads/fork-plus-threads.exp: no threads left
info inferiors
Num Description Executable
* 1 <null> /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.threads/fork-plus-threads
(gdb) PASS: gdb.threads/fork-plus-threads.exp: only inferior 1 left
All the "[Thread FOO] #NN stopped." above are bogus, as well as the
"Cannot remove breakpoints because program is no longer writable.",
which is a consequence.
The problem is that when we intercept a fork event, we should report
the event for the parent, only, and leave the child stopped, but not
report its stop event. GDB later decides whether to follow the parent
or the child. But because handle_extended_wait does not set the
child's last_status.kind to TARGET_WAITKIND_STOPPED, a
stop_all_threads/unstop_all_lwps sequence (e.g., from trying to access
memory) by mistake ends up queueing a SIGSTOP on the child, resuming
it, and then when that SIGSTOP is intercepted, because the LWP has
last_resume_kind set to resume_stop, gdbserver reports the stop to
GDB, as GDB_SIGNAL_0:
...
>>>> entering unstop_all_lwps
unstopping all lwps
proceed_one_lwp: lwp 1600
client wants LWP to remain 1600 stopped
proceed_one_lwp: lwp 1828
Client wants LWP 1828 to stop. Making sure it has a SIGSTOP pending
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Sending sigstop to lwp 1828
pc is 0x3615ebc7cc
Resuming lwp 1828 (continue, signal 0, stop expected)
continue from pc 0x3615ebc7cc
unstop_all_lwps done
sigchld_handler
<<<< exiting unstop_all_lwps
handling possible target event
>>>> entering linux_wait_1
linux_wait_1: [<all threads>]
my_waitpid (-1, 0x40000001)
my_waitpid (-1, 0x1): status(137f), 1828
LWFE: waitpid(-1, ...) returned 1828, ERRNO-OK
LLW: waitpid 1828 received Stopped (signal) (stopped)
pc is 0x3615ebc7cc
Expected stop.
LLW: resume_stop SIGSTOP caught for LWP 1828.1828.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...
linux_wait_1 ret = LWP 1828.1828, 1, 0
<<<< exiting linux_wait_1
Writing resume reply for LWP 1828.1828:1
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Tested on x86_64 Fedora 20, extended-remote.
gdb/gdbserver/ChangeLog:
2015-07-30 Pedro Alves <palves@redhat.com>
* linux-low.c (handle_extended_wait): Set the child's last
reported status to TARGET_WAITKIND_STOPPED.
The new gdb.threads/fork-plus-threads.exp test exposes one more
problem. When one types "info inferiors" after running the program,
one see's a couple inferior left still, while there should only be
inferior #1 left. E.g.:
(gdb) info inferiors
Num Description Executable
4 process 8393 /home/pedro/bugs/src/test
2 process 8388 /home/pedro/bugs/src/test
* 1 <null> /home/pedro/bugs/src/test
(gdb) info threads
Calling prune_inferiors() manually at this point (from a top gdb) does
not remove them, because they still have inf->pid != 0 (while they
shouldn't). This suggests that we never mourned those inferiors.
Enabling logs (master + previous patch) we see:
...
WL: waitpid Thread 0x7ffff7fc2740 (LWP 9513) received Trace/breakpoint trap (stopped)
WL: Handling extended status 0x03057f
LHEW: Got clone event from LWP 9513, new child is LWP 9579
[New Thread 0x7ffff37b8700 (LWP 9579)]
WL: waitpid Thread 0x7ffff7fc2740 (LWP 9508) received 0 (exited)
WL: Thread 0x7ffff7fc2740 (LWP 9508) exited.
^^^^^^^^
[Thread 0x7ffff7fc2740 (LWP 9508) exited]
WL: waitpid Thread 0x7ffff7fc2740 (LWP 9499) received 0 (exited)
WL: Thread 0x7ffff7fc2740 (LWP 9499) exited.
[Thread 0x7ffff7fc2740 (LWP 9499) exited]
RSRL: resuming stopped-resumed LWP Thread 0x7ffff37b8700 (LWP 9579) at 0x3615ef4ce1: step=0
...
(gdb) info inferiors
Num Description Executable
5 process 9508 /home/pedro/bugs/src/test
^^^^
4 process 9503 /home/pedro/bugs/src/test
3 process 9500 /home/pedro/bugs/src/test
2 process 9499 /home/pedro/bugs/src/test
* 1 <null> /home/pedro/bugs/src/test
(gdb)
...
Note the "Thread 0x7ffff7fc2740 (LWP 9508) exited." line.
That's this in wait_lwp:
/* Check if the thread has exited. */
if (WIFEXITED (status) || WIFSIGNALED (status))
{
thread_dead = 1;
if (debug_linux_nat)
fprintf_unfiltered (gdb_stdlog, "WL: %s exited.\n",
target_pid_to_str (lp->ptid));
}
}
That was the leader thread reporting an exit, meaning the whole
process is gone. So the problem is that this code doesn't understand
that an WIFEXITED status of the leader LWP should be reported to
infrun as process exit.
gdb/ChangeLog:
2015-07-30 Pedro Alves <palves@redhat.com>
PR threads/18600
* linux-nat.c (wait_lwp): Report to the core when thread group
leader exits.
gdb/testsuite/ChangeLog:
2015-07-30 Pedro Alves <palves@redhat.com>
PR threads/18600
* gdb.threads/fork-plus-threads.exp: Test that "info inferiors"
only shows inferior 1.
When a program forks and another process start threads while gdb is
handling the fork event, newly created threads are left stuck stopped
by gdb, even though gdb presents them as "running", to the user.
This can be seen with the test added by this patch. The test has the
inferior fork a certain number of times and waits for all children to
exit. Each fork child spawns a number of threads that do nothing and
joins them immediately. Normally, the program should run unimpeded
(from the point of view of the user) and exit very quickly. Without
this fix, it doesn't because of some threads left stopped by gdb, so
inferior 1 never exits.
The program triggers when a new clone thread is found while inside the
linux_stop_and_wait_all_lwps call in linux-thread-db.c:
linux_stop_and_wait_all_lwps ();
ALL_LWPS (lp)
if (ptid_get_pid (lp->ptid) == pid)
thread_from_lwp (lp->ptid);
linux_unstop_all_lwps ();
Within linux_stop_and_wait_all_lwps, we reach
linux_handle_extended_wait with the "stopping" parameter set to 1, and
because of that we don't mark the new lwp as resumed. As consequence,
the subsequent resume_stopped_resumed_lwps, called from
linux_unstop_all_lwps, never resumes the new LWP.
There's lots of cruft in linux_handle_extended_wait that no longer
makes sense. On systems with CLONE events support, we don't rely on
libthread_db for thread listing anymore, so the code that preserves
stop_requested and the handling of last_resume_kind is all dead.
So the fix is to remove all that, and simply always mark the new LWP
as resumed, so that resume_stopped_resumed_lwps re-resumes it.
gdb/ChangeLog:
2015-07-30 Pedro Alves <palves@redhat.com>
Simon Marchi <simon.marchi@ericsson.com>
PR threads/18600
* linux-nat.c (linux_handle_extended_wait): On CLONE event, always
mark the new thread as resumed. Remove STOPPING parameter.
(wait_lwp): Adjust call to linux_handle_extended_wait.
(linux_nat_filter_event): Adjust call to
linux_handle_extended_wait.
(resume_stopped_resumed_lwps): Add debug output.
gdb/testsuite/ChangeLog:
2015-07-30 Simon Marchi <simon.marchi@ericsson.com>
Pedro Alves <palves@redhat.com>
PR threads/18600
* gdb.threads/fork-plus-threads.c: New file.
* gdb.threads/fork-plus-threads.exp: New file.
This patch removes the isize output argument from the
fast_tracepoint_valid_at gdbarch hook. It was used to return the size
of the instruction that needs to be replaced when installing a fast
tracepoint. Instead of getting this value from the
fast_tracepoint_valid_at hook, we can call the gdb_insn_length function.
If we do not do this, then architectures which do not have a restriction
on where to install the fast tracepoint will send uninitialized memory
off to GDBserver. See remote_download_tracepoint:
~~~
int isize;
if (gdbarch_fast_tracepoint_valid_at (target_gdbarch (),
tpaddr, &isize, NULL))
xsnprintf (buf + strlen (buf), BUF_SIZE - strlen (buf), ":F%x",
isize);
~~~
The default implementation of fast_tracepoint_valid_at will not set
isize resulting in uninitialized memory being sent. Later on, GDBserver
could use this information to compute a jump offset.
gdb/ChangeLog:
* arch-utils.c (default_fast_tracepoint_valid_at): Remove unused
isize argument.
* arch-utils.h (default_fast_tracepoint_valid_at): Likewise.
* breakpoint.c (check_fast_tracepoint_sals): Adjust call to
gdbarch_fast_tracepoint_valid_at.
* gdbarch.sh (fast_tracepoint_valid_at): Remove isize argument.
* gdbarch.h: Regenerate.
* gdbarch.c: Regenerate.
* i386-tdep.c (i386_fast_tracepoint_valid_at): Remove isize
argument. Do not set it.
* remote.c (remote_download_tracepoint): Adjust call to
gdbarch_fast_tracepoint_valid_at. Call gdb_insn_length to get
the instruction length.
After previous patch, we don't need global variable arm_hwcap. This
patch is to remove it.
gdb/gdbserver:
2015-07-30 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (arm_hwcap): Remove it.
(arm_read_description): New local variable arm_hwcap. Don't
set arm_hwcap to zero.
arm_hwcap is a global variable, and we should avoid using it as much
as we can. Instead of checking arm_hwcap, we can check whether
regcache->tdesc is a certain kind of target description. This is
what this patch does.
gdb/gdbserver:
2015-07-30 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (arm_fill_wmmxregset): Don't use arm_hwcap.
Use regcache->tdesc instead.
(arm_store_wmmxregset): Likewise.
(arm_fill_vfpregset): Likewise.
(arm_store_vfpregset): Likewise.
In order to align with arm-linux-nat.c counterparts, we don't use
arm_num_regs and arm_regmap in functions arm_fill_gregset and
arm_store_gregset. Instead, we use register numbers. With this
patch applied, arm_fill_gregset and arm_store_gregset don't need
arm_num_regs and arm_regmap, and they will be moved to a separate
file shared for both arm and aarch64 in the following patch.
gdb/gdbserver:
2015-07-30 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c: Include arch/arm.h.
(arm_fill_gregset): Don't use arm_num_regs and arm_regmap.
(arm_store_gregset): Likewise.
This patch moves ARM register numbers enum to arch/arm.h, so that it
can used by GDBserver too.
This patch also creates a new directory gdb/arch in which arch-specific
or target-specific files are placed.
gdb:
2015-07-30 Yao Qi <yao.qi@linaro.org>
* arm-tdep.h (enum gdb_regnum): Move it to ...
* arch/arm.h: ... here. New file.
* Makefile.in (HFILES_NO_SRCDIR): Add arch/arm.h.
This patch cleans up the decoding functions using booleans when they can
decode two instructions. The boolean argument is used to know which of
the two instructions was decoded.
The instructions affected are BR/BLR, B/BL, CBZ/CBNZ and TBZ/TBNZ.
These arguments would be named after a named bit in the instruction
encoding, this patch renames them to 'is_XXX'. Furthermore, the
'unsigned' type would be used to describe a boolean while
aarch64_decode_cb would use 'int' (see the 'is64' argument). This patch
makes all booleans be 'int' and decoded bitfields be 'unsigned'.
gdb/ChangeLog:
* aarch64-tdep.c (decode_b): Rename link argument to is_bl.
Change its type to int *.
(decode_br): Rename link argument to is_blr. Change its type to
int *.
(decode_cb): Rename op argument to is_cbnz. Change its type to
int *.
(decode_tb): Rename op argument to is_tbnz. Change its type to
int *. Set is_tbnz to either 1 or 0.
(aarch64_analyze_prologue): Change type of is_link to int. Add
new variables is_cbnz and is_tbnz. Adjust call to
aarch64_decode_cb and aarch64_decode_tb.
gas/testsuite/
PR binutils/13571
* gas/i386/i386.exp: Run i386-intel and x86_64-intel.
* gas/i386/i386-intel.d: New file.
* gas/i386/x86_64-intel.d: Likewise.
opcodes/
PR binutils/13571
* i386-dis.c (MOD_0FC3): New.
(PREFIX_0FC3): Renamed to ...
(PREFIX_MOD_0_0FC3): This.
(dis386_twobyte): Replace PREFIX_0FC3 with MOD_0FC3.
(prefix_table): Replace Ma with Ev on movntiS.
(mod_table): Add MOD_0FC3.
We should change the default symbol for the versioned symbol only when
not performing a relocatable link.
bfd/
PR ld/18735
* elflink.c (_bfd_elf_add_default_symbol): Add the default
symbol if not performing a relocatable link.
(elf_link_add_object_symbols): Adjust the default symbol if
not performing a relocatable link.
ld/testsuite/
PR ld/18735
* ld-elf/pr18735.d: New file.
* ld-elf/pr18735.s: Likewise.
Since Pedro's ptrace cleanups, the MIPS buildbot compilation fails.
Code in MIPS native uses ptrace with 3 arguments, where ptrace requires
4. When looking at the definition of ptrace in
/usr/include/sys/ptrace.h, it shows that it takes a variable number of
arguments. The wrapper macro in nat/gdb_ptrace.h takes a fixed number
of arguments (4). That would explain why it used to work and stopped.
I am pushing this as obvious, tell me if there is any problem.
I built-tested this with a MIPS toolchain (ct-ng), but I don't have any
setup to test it. At least it should put back the buildbot builder in a
better shape.
gdb/ChangeLog:
* mips-linux-nat.c (write_watchpoint_regs): Add NULL as ptrace's 4th
parameter.
(mips_linux_new_thread): Likewise.
* nat/mips-linux-watch.c (mips_linux_read_watch_registers): Likewise.
gdb/gdbserver/ChangeLog:
* linux-mips-low.c (mips_linux_prepare_to_resume): Add NULL as
ptrace's 4th parameter.
Just a slight cleanup. Committed as obvious.
gdb/testsuite/ChangeLog:
* gdb.base/batch-preserve-term-settings.exp
(test_terminal_settings_preserved_after_cli_exit): Use
send_quit_command.
noclone attribute was added to GCC 4.5. We should check GCC version
before using it.
* ld-elf/pr18718.c (bar): Use noclone attribute only for GCC
4.5 or newer.
Tested on x86_64 Debian Stretch, native, gdbserver and
extended-gdbserver. Also tested that the various error paths, like if
$PPID is empty or if SIGTERM did not not kill GDB, function correctly.
gdb/testsuite/ChangeLog:
* gdb.base/batch-preserve-term-settings.exp (send_quit_command):
New proc.
(test_terminal_settings_preserved_after_sigterm): New test.
This patch changes "ld -r" not to set link_info.executable. It
removes !info->relocatable check for info->executable and adds it
for !info->executable in elflink.c.
bfd/
* elflink.c (elf_link_add_object_symbols): Remove
!info->relocatable check for info->executable. Add
!info->relocatable check for !info->executable.
(elf_link_output_extsym): Remove
!info->relocatable check for info->executable.
ld/
* lexsup.c (parse_args): Don't set link_info.executable to
TRUE for link_info.relocatable.
Now that we can expect inferior output with the gdbserver boards, this
is all it takes to have the test pass against extended-remote
gdbserver.
Don Breazeal originally wrong something like this:
https://sourceware.org/ml/gdb-patches/2015-03/msg00506.html
which was what originally inspired the introduction of
$inferior_spawn_id.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
Don Breazeal <donb@codesourcery.com>
* gdb.base/multi-forks.exp (continue_to_exit_bp_loc): Expect
output from both inferior_spawn_id and gdb_spawn_id.
Hi,
While examining BuildBot's logs, I noticed:
<https://sourceware.org/ml/gdb-testers/2015-q3/msg03767.html>
gdb.threads/attach-into-signal.exp has two nested loops and don't use
unique messages. This commit fixes that. Pushed under the obvious
rule.
gdb/testsuite/ChangeLog:
2015-07-29 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.threads/attach-into-signal.exp (corefunc): Use
with_test_prefix on nested loops, uniquefying the test messages.
My last commit d60a92216e introduced a
regression caused by a typo. This fixes it. Checked in as obvious.
Thanks to Pedro for reporting.
gdb/testsuite/ChangeLog:
2015-07-29 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.python/py-objfile.exp: Fix typo that snuck in from my last
commit.
When exiting GDB -- whether it's via the "quit" command, via a SIGTERM,
or otherwise -- we should leave the terminal in the state we acquired
it. To that end, we have to undo any modifications that may have been
made by the TUI (ncurses) or by the CLI (readline).
Tested on x86_64 Debian Stretch.
gdb/ChangeLog:
* top.c: Include "tui/tui.h".
(undo_terminal_modifications_before_exit): New static function.
(quit_force): Use it.
gdb/testsuite/ChangeLog:
* gdb.base/batch-preserve-term-settings.exp
(test_terminal_settings_preserved_after_cli_exit): New test.
Right now this variable is initialized to 0 i.e. terminal_is_inferior
and does not get set to terminal_is_ours until target_terminal_init() is
called. This function however only gets called when an inferior is
first created. In the meantime, terminal_state would wrongly remain set
to terminal_is_inferior.
Tested on x86_64 Debian Stretch -- native, gdbserver and
extended-gdbserver.
gdb/ChangeLog:
* target.c (terminal_state): Initialize to terminal_is_ours.
See ChangeLog for details. No functional change intended.
Tested on x86_64 Debian Stretch by verifying that the gdb.log output
remains unchanged for native, gdbserver and extended-gdbserver.
gdb/testsuite/ChangeLog:
* gdb.base/batch-preserve-term-settings.exp: Remove top-level
manipulation of saved_gdbflags.
(test_terminal_settings_preserved): Remove global declaration of
the unused variable pagination_prompt. Remove manipulation of
saved_gdbflags. Use a local variable EXTRA_GDBFLAGS instead of
GDBFLAGS.
We see the following regressions in testing on x86_64-linux,
reverse-step^M
Cannot access memory at address 0x2aaaaaed26c0^M
(gdb) FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function one
when GDB reverse step into a function, GDB wants to skip prologue so
it requests TARGET_OBJECT_CODE_MEMORY to read some code memory in
memory_xfer_partial_1. However in dcache_read_memory_partial, the object
becomes TARGET_OBJECT_MEMORY
return ops->to_xfer_partial (ops, TARGET_OBJECT_MEMORY, NULL,
myaddr, NULL, memaddr, len,
xfered_len);
in reverse debugging, ops->to_xfer_partial is record_full_core_xfer_partial
and it will return TARGET_XFER_E_IO because it can't find any records.
The test fails.
At this moment, the delegate relationship is like
dcache -> record-core -> core -> exec
and we want to GDB read memory across targets, which means if the
requested memory isn't found in record-core, GDB can read memory from
core, and exec even further if needed. I find raw_memory_xfer_partial
is exactly what I want.
gdb:
2015-07-29 Yao Qi <yao.qi@linaro.org>
PR record/18691
* dcache.c (dcache_read_memory_partial): Call
raw_memory_xfer_partial.
* target.c (raw_memory_xfer_partial): Make it non-static.
* target.h (raw_memory_xfer_partial): Declare.
As all tests that check gdb,noinferiorio have been adjusted to expect
inferior output with "-i $inferior_spawn_id", we can remove this now,
and thus enable those tests against gdbserver.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* boards/gdbserver-base.exp: Don't set gdb,noinferiorio.
The following patch will remove the gdb,noinferiorio setting from the
gdbserver boards, so this bit can be reverted.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/interrupt.exp: Revert back to checking gdb,noinferiorio
at the top.
This forces all tests that rely on stdio to be unbuffered, like
interrupt.exp was adjusted in 6f98576f.
To recap, in some scenarios, GDB or GDBserver can be spawned with
input _not_ connected to a tty, and then tests that rely on stdio fail
with timeouts, because the inferior's stdout and stderr streams end up
fully buffered. Calling gdb_unbuffer_output forces output to be
unbuffered.
See https://sourceware.org/ml/gdb-patches/2015-02/msg00809.html and
https://sourceware.org/ml/gdb-patches/2015-02/msg00819.html.
Tested on x86_64 Fedora 20, native, and against a remote gdbserver
board file that connects to the target with ssh, with and without -t
(create pty).
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/call-ar-st.c: Include "../lib/unbuffer_output.c".
(main): Call gdb_unbuffer_output.
* gdb.base/call-rt-st.c: Include "../lib/unbuffer_output.c".
(main): Call gdb_unbuffer_output.
* gdb.base/call-strs.c: Include "../lib/unbuffer_output.c".
(main): Call gdb_unbuffer_output.
* gdb.base/call-strs.exp: Adjust to step over the
gdb_unbuffer_output call.
* gdb.base/catch-gdb-caused-signals.c: Include
"../lib/unbuffer_output.c".
(main): Call gdb_unbuffer_output.
* gdb.base/dprintf.c: Include "../lib/unbuffer_output.c".
(main): Call gdb_unbuffer_output.
* gdb.base/ending-run.c: Include "../lib/unbuffer_output.c".
(main): Call gdb_unbuffer_output.
* gdb.base/run.c: Include "../lib/unbuffer_output.c".
(main): Call gdb_unbuffer_output.
* gdb.base/shlib-call.exp: Adjust to step over the
gdb_unbuffer_output call.
* gdb.base/shmain.c: Include "../lib/unbuffer_output.c".
(main): Call gdb_unbuffer_output.
* gdb.base/sizeof.c: Include "../lib/unbuffer_output.c".
(main): Call gdb_unbuffer_output.
* gdb.base/varargs.c: Include "../lib/unbuffer_output.c".
(main): Rename to ...
(test): ... this.
(main): Reimplement.
* gdb.base/varargs.exp: Run to test instead of to main.
* gdb.mi/mi-dprintf.c: Include "../lib/unbuffer_output.c".
(main): Call gdb_unbuffer_output.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-dprintf.exp (mi_expect_dprintf): New procedure,
factore out from mi_continue_dprintf. For call-style dprintfs,
expect dprintf output out of $inferior_spawn_id.
(mi_continue_dprintf): Use mi_expect_dprintf.
* gdb.mi/mi-dprintf.c: Include "../lib/unbuffer_output.c".
(main): Call gdb_unbuffer_output.
Rather than trying to determine where (which spawn id) the inferior
output comes out from, which depends on e.g., remote that supports
file i/o remote protocol extension, vs remote that sends inferior
output through a separate $inferior_spawn_id, vs native debugging,
which sends output through $gdb_spawn_id, vs native debugging with a
test that uses "separate-inferior-tty" (like mi-console.exp does),
always expect inferior output from both $inferior_spawn_id and
$gdb_spawn_id.
mi-console.exp itself already copes with different possible outputs in
a similar way:
# Combine both outputs in a single pattern.
set output "($semihosted_output|$native_output)"
Fixes:
FAIL: gdb.mi/mi-console.exp: Testing console output inferior output (timeout)
when testing against local gdbserver with gdb,noinferiorio removed
from the board file.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* lib/mi-support.exp (mi_inferior_spawn_id): Delete.
(default_mi_gdb_start): Set inferior_spawn_id instead of
mi_inferior_spawn_id. If $inferior_spawn_id is not set, set it to
gdb_spawn_id.
(mi_gdb_test): Always expect inferior output from both
$inferior_spawn_id and $gdb_spawn_id.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.gdb/selftest.exp (test_with_self): Update comment. Use
send_inferior and $inferior_spawn_id.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/call-rt-st.exp (print_struct_call): Split "result"
parameter into two new parameters, "inf_result" and "gdb_result".
Expect inferior output and gdb output from $inferior_spawn_id and
$gdb_spawn_id, respectively. Adjust all callers.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/call-ar-st.exp: Use gdb_test_stdio+multi_line instead
of gdb_test_sequence.
This one is a little more complicated than the other patches in this
series, because of the exit status wrapper handling, requiring a
little state machine.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/a2-run.exp (saw_usage, saw_exit_wrapper)
(saw_spurious_output): Expect inferior output from
$inferior_spawn_id. Use gdb_test_stdio.
This one needed a larger revamp. The issue is that the "info
breakpoints" test at the bottom of the file is broken on targets that
can do both server-side dprintf, and inferior I/O, because then
neither the breakpoint numbers match nor the "already hit N times"
output.
Address that by making the test restart gdb from scratch when
switching between dprintf styles. Test groups are factored into
procedures, and we now use with_test_prefix. While we're changing
test messages, lowercase a few test messages, and then while at it,
modernize a couple things here and there.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/dprintf.exp: Use standard_testfile. Change
prepare_for_testing call.
(srcfile): Don't set.
(restart): New procedure.
(test_dprintf): New procecure, use to continue over dprintfs.
(test_call, test_agent): New procedures, tests moved here.
Restart gdb and recreate dprintfs. Adjust expected output.
This adds a new helper procedure to be used by tests that rely on
stdio.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (gdb_test_stdio): New procedure.
There seems to be no point in relying on stdio here. Simply use
gdb_continue_to_end instead.
(not removing the printf calls, as the .c file is half generated.)
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/restore.exp (restore_tests): Use gdb_continue_to_end.
These tests rely on inferior I/O, but that seems pointless and
unrelated here. Simply remove the printf calls, and don't expect
them.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/call-signal-resume.exp: Remove check for
gdb,noinferiorio. Don't expect "no signal". Use gdb_test.
* gdb.base/unwindonsignal.exp: Likewise.
* gdb.base/call-signals.c (gen_signal): Remove printf call.
* gdb.base/unwindonsignal.c (gen_signal): Likewise.
No point in relying on stdio in this test. Simply run to a breakpoint
instead.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/siginfo-addr.c (pass): New function.
(handler): Call it iff si_addr is correct.
* gdb.base/siginfo-addr.exp: Remove gdb_skip_stdio_test check.
Set a breakpoint at "pass" and continue to it.
Sandra Loosemore
Pedro Alves
Pierre Langlois
Yao Qi
H.J. Lu
GDB Administrator
Simon Marchi
Patrick Palka
Sergio Durigan Junior
Hans-Peter Nilsson