This patch moves the enum definition out of the scope of struct, and
fixes the following error.
gdb/gdbserver/linux-aarch64-low.c:681:18: error: 'OPERAND_REGISTER' was not declared in this scope
operand.type = OPERAND_REGISTER;
^
gdb/gdbserver:
2015-11-19 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (enum aarch64_operand_type): New.
(struct aarch64_operand): Move enum out.
bfd/ChangeLog:
2015-11-19 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
PR ld/19263
* elf32-s390.c (elf_s390_gc_sweep_hook): Add null ptr check.
* elf64-s390.c (elf_s390_check_relocs): Port the GOTOFF handling
over from the 32 bit code.
(elf_s390_relocate_section): Likewise.
ARMv8.2 is an architectural extension of ARMv8. This patch adds an
architecture feature macro for ARMv8.2 to the binutils ARM target
with GAS command line option -march=armv8.2-a.
gas/
2015-11-19 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-arm.c (arm_archs): Add "armv8.2-a".
* doc/c-arm.texi (-march): Add "armv8.2-a".
include/opcode/
2015-11-19 Matthew Wahab <matthew.wahab@arm.com>
* arm.h (ARM_EXT2_V8_2A): New.
(ARM_ARCH_V8_2A): New.
Change-Id: I9e0f50e3c6cea24e6b87b8b862fd4e1cdcc1052e
ARMv8.2 is an architectural extension of ARMv8. This patch adds an
architecture feature macro for ARMv8.2 to the binutils AArch64 target
with GAS command line option -march=armv8.2-a.
gas/
2015-11-19 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_archs): Add "armv8.2-a".
* doc/c-aarch64.texi (-march): Likewise.
include/opcode/
2015-11-19 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (AARCH64_FEATURE_V8_2): New.
(AARCH64_ARCH_V8_2): New.
Change-Id: I129232ab00234a07d18ce4b619607344acb3cbaf
On powerpcle-cygwin a couple of tests fail due to alignment.
* gas/ppc/altivec3.d: Allow for padding at end of section.
* gas/testsuite/gas/ppc/power9.d: Likewise.
Defining this to zero for COFF and PE meant that code sections were
padded with zeros. The fact that no one has complained since 2006
says these targets are dead, I guess.
* config/tc-ppc.h (SUB_SEGMENT_ALIGN): Define only for ELF.
Another option might be to not bump "dot" for .tbss alignment in the
main section sizing loop, but that could leak some of the following
section into the TLS segment. Leakage shouldn't matter since it will
be to bytes past the end of .tdata, but for now this is a safer
option.
PR ld/19264
* ldlang.c (lang_size_sections): Don't ignore .tbss when
adjusting start of relro region.
If we constify value_cstring, we might as well constify this one.
gdb/ChangeLog:
* valops.c (value_string): Constify 'ptr' parameter.
* value.h (value_string): Constify 'ptr' parameter.
bfd/
* mach-o.h (bfd_mach_o_swap_in_non_scattered_reloc)
(bfd_mach_o_canonicalize_non_scattered_reloc)
(bfd_mach_o_pre_canonicalize_one_reloc): Declare.
(bfd_mach_o_backend_data): Rename field
_bfd_mach_o_swap_reloc_in to _bfd_mach_o_canonicalize_one_reloc.
* mach-o.c (bfd_mach_o_swap_in_non_scattered_reloc): Now public.
(bfd_mach_o_canonicalize_non_scattered_reloc): Renames from
bfd_mach_o_canonicalize_one_reloc.
(bfd_mach_o_pre_canonicalize_one_reloc): New function.
(bfd_mach_o_canonicalize_relocs): Adjust.
(bfd_mach_o_canonicalize_relocs): Rename define from
bfd_mach_o_swap_reloc_in.
* mach-o-target.c (TARGET_NAME_BACKEND): Use
bfd_mach_o_canonicalize_one_reloc instead of
bfd_mach_o_swap_reloc_in.
* mach-o-i386.c (bfd_mach_o_i386_canonicalize_one_reloc): Renames
from bfd_mach_o_i386_swap_reloc_in and adjust.
(bfd_mach_o_canonicalize_one_reloc): Renames from
bfd_mach_o_i386_canonicalize_one_reloc.
* mach-o-x86_64.c (bfd_mach_o_x86_64_canonicalize_one_reloc): Renames
from bfd_mach_o_x86_64_swap_reloc_in and adjust.
(bfd_mach_o_canonicalize_one_reloc): Renames from
bfd_mach_o_x86_64_canonicalize_one_reloc.
Commit 91ee7171d0 (MinGW and attribute format(printf/gnu_printf))
made common/common-defs.h depend on gnulib's substitute headers.
Turns out that that broke the gdbserver/ipa build (as the buildbots
discovered) because nothing is making sure that gnulib is built before
the ipa is.
gdb/gdbserver/ChangeLog:
2015-11-18 Pedro Alves <palves@redhat.com>
* Makefile.in (all_object_files): Add $IPA_OBJS.
Hi,
I build GDB with -fsanitize=address, and run testsuite. In
gdb.base/callfuncs.exp, I see the following error,
p t_float_values(0.0,0.0)
=================================================================
==8088==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x6020000cb650 at pc 0x6e195c bp 0x7fff164f9770 sp 0x7fff164f9768
READ of size 16 at 0x6020000cb650 thread T0^
#0 0x6e195b in regcache_raw_write /home/yao/SourceCode/gnu/gdb/git/gdb/regcache.c:912
#1 0x6e1e52 in regcache_cooked_write /home/yao/SourceCode/gnu/gdb/git/gdb/regcache.c:945
#2 0x466d69 in pass_in_v /home/yao/SourceCode/gnu/gdb/git/gdb/aarch64-tdep.c:1101
#3 0x467512 in pass_in_v_or_stack /home/yao/SourceCode/gnu/gdb/git/gdb/aarch64-tdep.c:1196
#4 0x467d7d in aarch64_push_dummy_call /home/yao/SourceCode/gnu/gdb/git/gdb/aarch64-tdep.c:1335
The code in pass_in_v read contents from V registers (128 bit), but the
data passed through V registers can be less than 128 bit. In this case,
float is passed. So writing V registers contents into contents buff
will cause overflow. In this patch, we add an array reg[V_REGISTER_SIZE],
which is to hold the contents from V registers, and then copy useful
bits to buf.
gdb:
2015-11-18 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (pass_in_v): Add argument len. Add local array
reg. Callers updated.
Having this be a config option doesn't make sense: the code size is
pretty much the same (as all the logic is still active), and if it's
disabled, the sim throws an error if you try to use it. That means
we can't break sims that weren't using it before by enabling it all
the time.
Building a gdb that includes the PPC sim in C++ mode fails to link with:
(...)s.o compile-object-load.o compile-object-run.o compile-loc2c.o compile-c-support.o inflow.o init.o \
../sim/ppc/libsim.a ../readline/libreadline.a ../opcodes/libopcodes.a ../bfd/libbfd.a -lz ../libiberty/libiberty.a ../libdecnumber/libdecnumber.a -ldl -ldl -lncurses -lm -ldl -lguile-2.0 -lgc -lpthread -ldl -lutil -lm -lpython2.7 -Xlinker -export-dynamic -lexpat -llzma -lbabeltrace -lbabeltrace-ctf ../libiberty/libiberty.a build-gnulib/import/libgnu.a
../sim/ppc/libsim.a(sim_calls.o): In function `sim_open':
/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:73: undefined reference to `printf_filtered'
/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:73: undefined reference to `printf_filtered'
../sim/ppc/libsim.a(sim_calls.o): In function `sim_close':
/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:93: undefined reference to `printf_filtered'
/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:93: undefined reference to `printf_filtered'
../sim/ppc/libsim.a(sim_calls.o): In function `sim_load':
/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:102: undefined reference to `printf_filtered'
../sim/ppc/libsim.a(sim_calls.o):/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:102: more undefined references to `printf_filtered' follow
collect2: error: ld returned 1 exit status
The undefined references come from TRACE macro calls, which expand to
calls to printf_filtered.
But note that the sim's 'printf_filtered' is actually a #define to
'sim_io_printf_filtered', in sim_callbacks.h :
#define printf_filtered sim_io_printf_filtered
AFAICS, this is not meant to call gdb's printf_filtered function. The
ChangeLog entry that added the printf_filtered macro reads:
Tue Jul 30 21:12:24 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
* sim_callbacks.h (sim_io_printf_filtered): Replace
printf_filtered with a local simulator specific version. Add
#define printf_filtered to simplify updating of existing code.
That is, just another incomplete/partial transition. Maybe prior to
1996 this was really meant to call gdb's printf_filtered version.
The reference to printf_filtered appears because sim_calls.c, the
compilation unit that fails to link, has this at the top:
#undef printf_filtered /* blow away the mapping */
presumably so that this further below:
void
sim_io_printf_filtered(const char *fmt,
...)
{
(...)
callbacks->printf_filtered(callbacks, "%s", message);
}
works. So those TRACE macros instances in sim_calls.c just happen to
work because gdb is linked in, which satisfies the 'printf_filtered'
reference, when GDB is built in C mode. When built in C++ mode, the
problem is exposed, as GDB's printf_filtered is mangled.
The fix here is to make the TRACE macro call sim_io_printf_filtered
directly.
(Standalone "run" doesn't fail to link simply because the offending
routines are not part of its link.)
sim/ppc/ChangeLog
2015-11-17 Pedro Alves <palves@redhat.com>
* debug.h (TRACE, ITRACE, DTRACE, DITRACE, PTRACE): Call
sim_io_printf_filtered instead of printf_filtered.
Hi,
Some tests in gdb.threads/multiple-step-overs.exp fail on arm target
when the displaced stepping on, but they pass when displaced stepping
is off.
FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
when displaced stepping is on,
Sending packet: $vCont;c#a8...infrun: infrun_async(1)^M <--- [1]
infrun: prepare_to_wait^M
infrun: target_wait (-1.0.0, status) =^M
infrun: -1.0.0 [Thread 0],^M
infrun: status->kind = ignore^M
infrun: TARGET_WAITKIND_IGNORE^M
infrun: prepare_to_wait^M
Packet received: T05swbreak:;0b:f8faffbe;0d:409ee7b6;0f:d0880000;thread:p635.636;core:0;^M
infrun: target_wait (-1.0.0, status) =^M
infrun: 1589.1590.0 [Thread 1590],^M
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP^M
infrun: TARGET_WAITKIND_STOPPED^M
infrun: stop_pc = 0x88d0^M
infrun: context switch^M
infrun: Switching context from Thread 1591 to Thread 1590^
GDB resumes the whole process (all threads) rather than the specific
thread for which GDB wants to step over the breakpoint (as shown in [1]).
That is wrong because we resume a single thread and leave others stopped
when doing a normal step over where we temporarily remove the breakpoint,
single-step, reinsert the breakpoint, is that if we let other threads run
in the period while the breakpoint is removed, then these other threads
could miss the breakpoint. Since with displaced stepping, we don't ever
remove the breakpoint, it should be fine to let other threads run. However,
there's another reason that we should not let other threads run: that is
the case where some of those threads are also stopped for a breakpoint that
itself needs to be stepped over. If we just let those threads run, then
they immediately re-trap their breakpoint again.
when displaced stepping is off, GDB behaves correctly, only resumes
the specific thread (as shown in [2]).
Sending packet: $vCont;c:p611.613#b2...infrun: infrun_async(1)^M <-- [2]
infrun: prepare_to_wait^M
infrun: target_wait (-1.0.0, status) =^M
infrun: -1.0.0 [Thread 0],^M
infrun: status->kind = ignore^M
infrun: TARGET_WAITKIND_IGNORE^M
infrun: prepare_to_wait^M
Packet received: T05swbreak:;0b:f8faffbe;0d:409e67b6;0f:48880000;thread:p611.613;core:1;^M
infrun: target_wait (-1.0.0, status) =^M
infrun: 1553.1555.0 [Thread 1555],^M
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP^M
infrun: TARGET_WAITKIND_STOPPED^M
infrun: clear_step_over_info^M
infrun: stop_pc = 0x8848
The current logic in GDB on deciding the set of threads to resume is:
/* Decide the set of threads to ask the target to resume. */
if ((step || thread_has_single_step_breakpoints_set (tp))
&& tp->control.trap_expected)
{
/* We're allowing a thread to run past a breakpoint it has
hit, by single-stepping the thread with the breakpoint
removed. In which case, we need to single-step only this
thread, and keep others stopped, as they can miss this
breakpoint if allowed to run. */
resume_ptid = inferior_ptid;
}
else
resume_ptid = internal_resume_ptid (user_step);
it doesn't handle the case correctly that GDB continue (instead of
single step) the thread for displaced stepping.
I also update the comment below to reflect the code. I remove the
"with the breakpoint removed" comment, because GDB doesn't remove
breakpoints in displaced stepping, so we don't have to worry that
other threads may miss the breakpoint.
Patch is regression tested on both x86_64-linux and arm-linux.
gdb:
2015-11-17 Yao Qi <yao.qi@linaro.org>
* infrun.c (resume): Check control.trap_expected only
when deciding the set of threads to resume.
We currently throw exceptions from signal handlers (e.g., for
Quit/ctrl-c). But throwing C++ exceptions from signal handlers is
undefined. (That doesn't restore signal masks, like siglongjmp does,
and, because asynchronous signals can arrive at any instruction, we'd
have to build _everything_ with -fasync-unwind-tables to make it
reliable.) It happens to work on x86_64 GNU/Linux at least, but it's
likely broken on other ports.
Until we stop throwing from signal handlers, use setjmp/longjmp based
exceptions in C++ mode as well.
gdb/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
* common/common-exceptions.h (GDB_XCPT_SJMP, GDB_XCPT_TRY)
(GDB_XCPT_RAW_TRY, GDB_XCPT): Define.
Replace __cplusplus checks with GDB_XCPT checks throughout.
* common/common-exceptions.c: Replace __cplusplus checks with
GDB_XCPT checks throughout.
Cross building gdbserver for --host=x86_64-w64-mingw32 with gcc 4.8.4
20141219 (Fedora MinGW 4.8.4-1.fc20), I get:
src/gdb/gdbserver/tracepoint.c: In function 'cmd_qtdp':
src/gdb/gdbserver/tracepoint.c:2577:7: error: unknown conversion type character 'l' in format [-Werror=format=]
trace_debug ("Defined %stracepoint %d at 0x%s, "
^
src/gdb/gdbserver/tracepoint.c:2577:7: error: unknown conversion type character 'l' in format [-Werror=format=]
src/gdb/gdbserver/tracepoint.c:2577:7: error: too many arguments for format [-Werror=format-extra-args]
src/gdb/gdbserver/tracepoint.c: In function 'stop_tracing':
src/gdb/gdbserver/tracepoint.c:3447:7: error: unknown conversion type character 'l' in format [-Werror=format=]
trace_debug ("Stopping the trace because "
^
src/gdb/gdbserver/tracepoint.c:3447:7: error: too many arguments for format [-Werror=format-extra-args]
src/gdb/gdbserver/tracepoint.c: In function 'collect_data_at_tracepoint':
src/gdb/gdbserver/tracepoint.c:4651:3: error: unknown conversion type character 'l' in format [-Werror=format=]
trace_debug ("Making new traceframe for tracepoint %d at 0x%s, hit %" PRIu64,
^
src/gdb/gdbserver/tracepoint.c:4651:3: error: too many arguments for format [-Werror=format-extra-args]
src/gdb/gdbserver/tracepoint.c: In function 'collect_data_at_step':
src/gdb/gdbserver/tracepoint.c:4687:3: error: unknown conversion type character 'l' in format [-Werror=format=]
trace_debug ("Making new step traceframe for "
^
trace_debug is a macro that calls:
static void trace_vdebug (const char *, ...) ATTRIBUTE_PRINTF (1, 2);
The calls that fail checking use PRIu64, etc., like:
trace_debug ("Defined %stracepoint %d at 0x%s, "
"enabled %d step %" PRIu64 " pass %" PRIu64,
tpoint->type == fast_tracepoint ? "fast "
: tpoint->type == static_tracepoint ? "static " : "",
tpoint->number, paddress (tpoint->address), tpoint->enabled,
tpoint->step_count, tpoint->pass_count);
gnulib's stdio/printf module replacements may make %llu, etc. work on
mingw, instead of the MS-specific %I64u, and thus may make PRIu64
expand to %llu. However, gcc isn't aware of that, because libiberty's
ansidecl.h defines ATTRIBUTE_PRINTF as using attribute format(printf).
But, with that format, gcc checks for MS-style format strings (%I64u).
In order to have gcc expect gnu/standard formats, we need to use
gnu_printf format instead. Which version to use (printf/gnu_printf)
depends on msvcrt and mingw version, and so gnulib has a
configure-time check, and defines _GL_ATTRIBUTE_FORMAT_PRINTF
accordingly.
Since _GL_ATTRIBUTE_FORMAT_PRINTF is compatible with ATTRIBUTE_PRINTF,
the fix is simply to make use of the former.
gdb/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
* common/common-defs.h (ATTRIBUTE_PRINTF): Redefine in terms of
_GL_ATTRIBUTE_FORMAT_PRINTF after including ansidecl.h.
With some toolchains, building in C++ mode stumbles on many instances
of:
In file included from ../../src/gdb/../include/splay-tree.h:43:0,
from ../../src/gdb/dcache.c:26:
build-gnulib/import/inttypes.h:61:3: error: #error "This file assumes that 'int' has exactly 32 bits. Please report your platform and compiler to <bug-gnulib@gnu.org>."
# error "This file assumes that 'int' has exactly 32 bits. Please report your platform and compiler to <bug-gnulib@gnu.org>."
^
make: *** [dcache.o] Error 1
That's:
#if !(INT_MIN == INT32_MIN && INT_MAX == INT32_MAX)
# error "This file assumes that 'int' has exactly 32 bits. Please report your platform and compiler to <bug-gnulib@gnu.org>."
#endif
I see it when cross building for --host=x86_64-w64-mingw32 using
Fedora 20's g++ (gcc version 4.8.4 20141219 (Fedora MinGW
4.8.4-1.fc20)), Simon reports seeing this on several cross compilers
too.
The issue is that on some hosts that predate C++11, when using C++ one
must define __STDC_CONSTANT_MACROS/__STDC_LIMIT_MACROS to make visible
the definitions of INTMAX_C / INTMAX_MAX etc.
This was a C99 requirement that later C++11 -- the first to define
stdint.h -- removed, and then C11 removed it as well.
https://www.gnu.org/software/gnulib/manual/html_node/stdint_002eh.html
says that gnulib's stdint.h fixes this, but because we run gnulib's
configure tests with a C compiler, gnulib determines that mingw's
stdint.h is C99-compliant, and doesn't actually replace it. Actually,
even though configuring gnulib with a C++ compiler does result in
gnulib replacing stdint.h, the resulting replacement is broken for
mingw, because it defines uintptr_t incorrectly. I sent a gnulib
patch upstream to fix that, here:
https://lists.gnu.org/archive/html/bug-gnulib/2015-11/msg00004.html
but then even with that, gnulib still stumbles on other
configured-with-C++-compiler problems.
So for now, until gnulib + C++ is fixed upstream and then gdb's copy
is updated, which may take a while, I think it's best to keep
configuring gnulib in C, and define
__STDC_LIMIT_MACROS/__STDC_CONSTANT_MACROS ourselves, just like C99
intended.
gdb/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
* common/common-defs.h (__STDC_CONSTANT_MACROS)
(__STDC_LIMIT_MACROS): Define before including stdint.h.
Building in C++ errors out with:
../../src/gdb/windows-nat.c: In function 'int get_windows_debug_event(target_ops*, int, target_waitstatus*)':
../../src/gdb/windows-nat.c:1503:13: warning: invalid conversion from 'int' to 'gdb_signal' [-fpermissive]
last_sig = 1;
^
../../src/gdb/windows-nat.c:1533:43: warning: invalid conversion from 'int' to 'gdb_signal' [-fpermissive]
windows_resume (ops, minus_one_ptid, 0, 1);
^
../../src/gdb/windows-nat.c:1228:1: warning: initializing argument 4 of 'void windows_resume(target_ops*, ptid_t, int, gdb_signal)' [-fpermissive]
windows_resume (struct target_ops *ops,
^
Looking at the code, I can't figure out why we treat first chance
exceptions any different here.
AFAICS, we set last_sig to 1, and then call windows_resume passing
signal==1, so the DBG_EXCEPTION_NOT_HANDLED code path in win32_resume
is taken:
~~~
if (sig != GDB_SIGNAL_0)
{
if (current_event.dwDebugEventCode != EXCEPTION_DEBUG_EVENT)
{
OUTMSG (("Cannot continue with signal %d here.\n", sig));
}
else if (sig == last_sig)
continue_status = DBG_EXCEPTION_NOT_HANDLED;
else
OUTMSG (("Can only continue with recieved signal %d.\n", last_sig));
}
~~~
Fix this by removing this special casing. gdbserver also goes
straight to continuing with DBG_EXCEPTION_NOT_HANDLED, AFAICS.
gdb/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
* windows-nat.c (handle_exception): Return 0 for first chance
exceptions.
(get_windows_debug_event): Adjust.
Building in C++ caught a buglet here:
../../../src/gdb/gdbserver/win32-low.c: In function 'void win32_resume(thread_resume*, size_t)':
../../../src/gdb/gdbserver/win32-low.c:929:11: error: invalid conversion from 'int' to 'gdb_signal' [-fpermissive]
sig = resume_info[0].sig;
^
../../../src/gdb/gdbserver/win32-low.c:934:11: error: invalid conversion from 'int' to 'gdb_signal' [-fpermissive]
sig = 0;
^
Signals in the "struct thread_resume" structure are host signals, not
gdb signals. The current code happens to work because the only
signals that the Windows port supports have the same number as the gdb
equivalent (see handle_exception for the win32 exception -> gdb signal
mapping).
gdb/gdbserver/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
* win32-low.c (win32_resume): Use gdb_signal_from_host,
GDB_SIGNAL_0 and gdb_signal_to_string.
Fixes:
../../src/gdb/windows-nat.c:287:11: error: invalid conversion from 'int' to 'gdb_signal' [-fpermissive]
{-1, -1}};
^
The signal number here doesn't really matter.
gdb/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
* windows-nat.c (xslate): Use GDB_SIGNAL_UNKNOWN instead of -1 as
signal number for terminator.
Fixes:
../../../src/gdb/gdbserver/win32-low.c: In function 'int win32_kill(int)':
../../../src/gdb/gdbserver/win32-low.c:823:46: error: invalid conversion from 'int' to 'target_waitkind' [-fpermissive]
struct target_waitstatus our_status = { 0 };
^
handle_output_debug_string doesn't use the parameter for anything
(it's an output parameter in the gdb version), so just remove it.
gdb/gdbserver/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
* win32-low.c (handle_output_debug_string): Remove parameter.
(win32_kill): Remove our_status local and adjust call to
handle_output_debug_string.
(get_child_debug_event): Adjust call to
handle_output_debug_string.
Fixes a set of errors like:
../../src/gdb/windows-nat.c: In function 'void _initialize_loadable()':
../../src/gdb/windows-nat.c:2778:30: error: invalid conversion from 'void*' to 'BOOL (*)(DWORD) {aka int (*)(long unsigned int)}' [-fpermissive]
DebugActiveProcessStop = (void *)
^
gdb/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
* windows-nat.c (AdjustTokenPrivileges_ftype)
(DebugActiveProcessStop_ftype, DebugBreakProcess_ftype)
(DebugSetProcessKillOnExit_ftype, EnumProcessModules_ftype)
(GetCurrentConsoleFont_ftype, GetModuleInformation_ftype)
(LookupPrivilegeValueA_ftype, OpenProcessToken_ftype)
(GetConsoleFontSize_ftype): New typedefs.
(AdjustTokenPrivileges, DebugActiveProcessStop)
(DebugBreakProcess, DebugSetProcessKillOnExit, EnumProcessModules)
(GetConsoleFontSize, GetCurrentConsoleFont, GetModuleInformation)
(LookupPrivilegeValueA, OpenProcessToken, GetConsoleFontSize):
Adjust.
(GetModuleFileNameEx_ftype): New typedef.
(GetModuleFileNameEx): Use it.
(_initialize_loadable): Define GPA macro and use it.
c_string_type contains values meant to be OR'ed together (even though
some bits are mutually exclusive), so it makes sense to make it an
enum flags type.
gdb/ChangeLog:
2015-11-17 Simon Marchi <simon.marchi@ericsson.com>
* c-exp.y (exp): Adjust, change enum c_string_type to
c_string_type.
(parse_string_or_char): Likewise.
* c-lang.c (charset_for_string_type): Likewise.
(classify_type): Likewise.
(c_printchar): Likewise.
(c_printstr): Likewise.
(evaluate_subexp_c): Likewise. And change cast to enum
c_string_type_values.
* c-lang.h: Include "common/enum_flags.h".
(enum c_string_type): Rename to...
(enum c_string_type_values): ...this.
(c_string_type): Define new enum flags type.
This patch fixes C++ build errors like this:
/home/pedro/gdb/mygit/cxx-convertion/src/gdb/linux-tdep.c:1126:35: error: invalid conversion from ‘int’ to ‘filterflags’ [-fpermissive]
| COREFILTER_HUGETLB_PRIVATE);
^
This is a case of enums used as bit flags. Unlike "regular" enums,
these values are supposed to be or'ed together. However, in C++, the
type of "(ENUM1 | ENUM2)" is int, and you then can't assign an int to
an enum variable without a cast. That means that this:
enum foo_flags flags = 0;
if (...)
flags |= FOO_FLAG1;
if (...)
flags |= FOO_FLAG2;
... would have to be written as:
enum foo_flags flags = (enum foo_flags) 0;
if (...)
flags = (enum foo_flags) (flags | FOO_FLAG1);
if (...)
flags = (enum foo_flags) (flags | FOO_FLAG2);
which is ... ugly. Alternatively, we'd have to use an int for the
variable's type, which isn't ideal either.
This patch instead adds an "enum flags" class. "enum flags" are
exactly the enums where the values are bits that are meant to be ORed
together.
This allows writing code like the below, while with raw enums this
would fail to compile without casts to enum type at the assignments to
'f':
enum some_flag
{
flag_val1 = 1 << 1,
flag_val2 = 1 << 2,
flag_val3 = 1 << 3,
flag_val4 = 1 << 4,
};
DEF_ENUM_FLAGS_TYPE(enum some_flag, some_flags)
some_flags f = flag_val1 | flag_val2;
f |= flag_val3;
It's also possible to assign literal zero to an enum flags variable
(meaning, no flags), dispensing either adding an awkward explicit "no
value" value to the enumeration or the cast to assignments from 0.
For example:
some_flags f = 0;
f |= flag_val3 | flag_val4;
Note that literal integers other than zero do fail to compile:
some_flags f = 1; // error
C is still supported -- DEF_ENUM_FLAGS_TYPE is just a typedef in that
case.
gdb/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
* btrace.h: Include common/enum-flags.h.
(btrace_insn_flags): Define.
(struct btrace_insn) <flags>: Change type.
(btrace_function_flags): Define.
(struct btrace_function) <flags>: Change type.
(btrace_thread_flags): Define.
(struct btrace_thread_info) <flags>: Change type.
* c-exp.y (token_flags): Rename to ...
(token_flag): ... this.
(token_flags): Define.
(struct token) <flags>: Change type.
* common/enum-flags.h: New file.
* compile/compile-c-types.c (convert_qualified): Change type of
'quals' local.
* compile/compile-internal.h: Include "common/enum-flags.h".
(gcc_qualifiers_flags): Define.
* completer.c (enum reg_completer_targets): Rename to ...
(enum reg_completer_target): ... this.
(reg_completer_targets): Define.
(reg_or_group_completer_1): Change type of 'targets' parameter.
* disasm.c (do_mixed_source_and_assembly_deprecated): Change type
of 'psl_flags' local.
(do_mixed_source_and_assembly): Change type of 'psl_flags' local.
* infrun.c: Include "common/enum-flags.h".
(enum step_over_what): Rename to ...
(enum step_over_what_flag): ... this.
(step_over_what): Change type.
(start_step_over): Change type of 'step_what' local.
(thread_still_needs_step_over): Now returns a step_over_what.
Adjust.
(keep_going_pass_signal): Change type of 'step_what' local.
* linux-tdep.c: Include "common/enum-flags.h".
(enum filterflags): Rename to ...
(enum filter_flag): ... this.
(filter_flags): Define.
(dump_mapping_p): Change type of 'filterflags' parameter.
(linux_find_memory_regions_full): Change type of 'filterflags'
local.
(linux_find_memory_regions_full): Pass the address of an unsigned
int to sscanf instead of the address of an enum.
* record-btrace.c (btrace_print_lines): Change type of local
'psl_flags'.
(btrace_call_history): Replace 'flags' parameter
with 'int_flags' parameter. Adjust.
(record_btrace_call_history, record_btrace_call_history_range)
(record_btrace_call_history_from): Rename 'flags' parameter to
'int_flags'. Use record_print_flags.
* record.h: Include "common/enum-flags.h".
(record_print_flags): Define.
* source.c: Include "common/enum-flags.h".
(print_source_lines_base, print_source_lines): Change type of
flags parameter.
* symtab.h: Include "common/enum-flags.h".
(enum print_source_lines_flags): Rename to ...
(enum print_source_lines_flag): ... this.
(print_source_lines_flags): Define.
(print_source_lines): Change prototype.
Instead of adding a cast at the memory_error call, as needed for C++,
and have the reader understand the indirection, make it simple and
hardcode the generic memory error at the memory_error call site.
gdb/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
* guile/scm-disasm.c (gdbscm_disasm_read_memory): Return -1 on
error instead of TARGET_XFER_E_IO.
(gdbscm_disasm_memory_error): Always pass TARGET_XFER_E_IO to
memory_error.
This patch fixes all occurences of left-shifting negative constants in C cod
which is undefined by the C standard.
gdb/testsuite/ChangeLog:
* lib/dwarf.exp (_note): Fix left shift of negative value.
* gdb.trace/trace-condition.exp: Likewise.
This patch fixes all occurences of left-shifting negative constants in C cod
which is undefined by the C standard.
gdb/ChangeLog:
* hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend)
(prologue_inst_adjust_sp, hppa_frame_cache): Fix left shift of negative
value.
* dwarf2read.c (read_subrange_type): Likewise.
This code tries to shift an integer 31 bits which triggers a werror:
gas/config/tc-microblaze.c:742:21: error: integer overflow in expression [-Werror=overflow]
e->X_add_number |= -(1 << 31);
Cast the 1 to offsetT to match X_add_number to fix things.
