2001-11-04 Chris Demetriou <cgd@broadcom.com>
* configure.in (mips-*-netbsd*): Add support for target.
* configure: Regenerate.
[ gas/testsuite/ChangeLog ]
2001-11-04 Chris Demetriou <cgd@broadcom.com>
* gas/mips/mips.exp (svr4pic): Set if target is *-*-netbsd*.
(aout): Don't set if *-*-netbsd*.
[ ld/ChangeLog ]
2001-11-04 Chris Demetriou <cgd@broadcom.com>
* configure.tgt (mips*el-*-netbsd*, mips*-*-netbsd*):
Add support for targets.
2001-10-31 Chris Demetriou <cgd@demetriou.com>
* elf32-mips.c (_bfd_mips_elf_hi16_reloc): Handle PC-relative
relocations properly.
[ gas/ChangeLog ]
2001-10-31 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (HAVE_32BIT_ADDRESSES): If compiling embedded
PIC code, assume pointers the same size as GPRs.
(macro): In M_LA_AB handling for embedded PIC code, support
"la $treg,foo-bar($breg)". In load/store handling
(label ld_st) support "<op> $treg,<sym>-<local_sym>($breg)"
which is used by the compiler for switch statements.
In load/store double multi-instruction macro handling
(label ldd_std) add a comment that no special handling
is currently done for embedded PIC.
(mips_ip): In 'o' (16-bit offset) case, only accept 16
bit offsets.
[ gas/testsuite/ChangeLog ]
2001-10-31 Chris Demetriou <cgd@broadcom.com>
* gas/mips/empic.s: Undo damage inflicted on 2000-12-02.
* gas/mips/empic.d: Likewise.
* gas/mips/elempic.d: Likewise (it was copied into other files).
* gas/mips/telempic.d: Likewise.
* gas/mips/tempic.d: Likewise.
* gas/mips/empic2.s: New test to check new 'la' and 'lw' (and
related ops) syntax, test loads with large offsets.
* gas/mips/emcic2.d: Likewise.
* gas/mips/mips.exp: Run the new test on ELF platforms.
2001-10-21 Chris Demetriou <cgd@broadcom.com>
* mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
"bltzall" as writing GPR 31 (since they do).
* mips-dis.c (print_insn_arg): Calculate info->target
where appropriate.
(print_insn_mips): Fill in instruction info.
(print_mips16_insn_arg): Remove unneded variable 'val'.
Removed duplicated instruction target calculations,
calculate once and print that result. Use same idiom for
masking the jump segment bits as is used in print_insn_arg.
[gas/testsuite/ChangeLog]
2001-10-21 Chris Demetriou <cgd@broadcom.com>
* gas/mips/beq.s: Add zero words at end of instructions so
that objdump will print "..." when disassembling.
* gas/mips/beq.d: Update for disassembler changes which force
branch delay-slot nops to be printed.
* gas/mips/bge.d: Ditto.
* gas/mips/bgeu.d: Ditto.
* gas/mips/blt.d: Ditto.
* gas/mips/bltu.d: Ditto.
* gas/mips/jal-svr4pic.d: Ditto.
* gas/mips/jal-xgot.d: Ditto.
2001-10-17 Chris Demetriou <cgd@broadcom.com>
* gas/mips/mips.exp (sb1-ext-ps): New test to test
SB-1 core's paired-single extensions to the MIPS64 ISA.
* gas/mips/sb1-ext-ps.d: New file.
* gas/mips/sb1-ext-ps.s: New file.
[include/opcode/ChangeLog]
2001-10-17 Chris Demetriou <cgd@broadcom.com>
* mips.h (INSN_SB1): New cpu-specific instruction bit.
(OPCODE_IS_MEMBER): Allow instructions matching INSN_SB1
if cpu is CPU_SB1.
[opcodes/ChangeLog]
2001-10-17 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_isa_type): Make the ISA used to disassemble
SB-1 binaries include instructions specific to the SB-1.
* mips-opc.c (SB1): New definition.
(mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
"recip.ps", "rsqrt.ps", and "sqrt.ps".
* gas/ppc/booke.s (rfci, wrtee, wrteei, mfdcrx, mfdcr, mtdcrx,
mtdcr, msync, dcba, mbar): New BookE tests.
* gas/ppc/booke.d: Update for new BookE tests.
[opcodes/ChangeLog]
* ppc-opc.c (MO): New macro for MO field of mbar instruction.
(powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
* config/tc-ppc.c (md_parse_option): New -m7410, -m7450 and -m7455
flags, equivalent to -m7400. New -maltivec to enable AltiVec
instructions. New -mbook64 and -mbooke/-mbooke32 flags to enable
64-bit and 32-bit BookE support, respectively. Change -m403 and
-m405 to set PPC403 option.
(md_show_usage): Adjust for new options.
* doc/all.texi: Set PPC.
* doc/as.texinfo: Add PPC support and pull in c-ppc.texi.
* doc/c-ppc.texi: New file.
* doc/Makefile.am (CPU_DOCS): Add c-ppc.texi.
* doc/Makefile.in: Regenerate.
[gas/testsuite/ChangeLog]
* gas/ppc/booke.s: New test for Motorola BookE.
* gas/ppc/booke.d: New file.
* gas/ppc/ppc.exp: Test booke.s.
[include/opcode/ChangeLog]
* ppc.h (PPC_OPCODE_BOOKE, PPC_OPCODE_403): New opcode flags for
BookE and PowerPC403 instructions.
[opcodes/ChangeLog]
* ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
instruction field instruction/extraction functions for new BookE
DE form instructions.
(CT): New macro for CT field in an X form instruction.
(DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
instructions.
(PPC64): Don't include PPC_OPCODE_PPC.
(403): New opcode macro for PPC403 processors.
(BOOKE): New opcode macro for BookE processors.
(bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
(bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
(dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
(stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
(mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
(subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
(subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
(addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
(lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
(stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
(tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
(lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
(stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
(lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
* ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
for a disassembler option of `booke', `booke32' or `booke64' to enable
BookE support in the disassembler.
(MACRO_LITERAL, MACRO_BASE, MACRO_BYTOFF, MACRO_JSR): Remove.
(alpha_macros): Remove occurrences of same.
(O_lituse_addr, O_gprel): New.
(DUMMY_RELOC_LITUSE_*): New.
(s_alpha_ucons, s_alpha_arch): Prototype.
(alpha_reloc_op): Construct elements via DEF macro.
(ALPHA_RELOC_SEQUENCE_OK): Remove.
(struct alpha_reloc_tag): Rename from alpha_literal_tag; rename
members to not be literal specific.
(next_sequence_num): New.
(md_apply_fix3): Cope with missing GPDISP_LO16. Adjust for
added/removed BFD relocations.
(alpha_force_relocation, alpha_fix_adjustable): Likewise.
(alpha_adjust_symtab_relocs): Handle GPDISP relocs as well.
(tokenize_arguments): Parse ! relocations properly.
(find_macro_match): Delete unused macro argument types.
(assemble_insn): Add reloc parameter; emit that instead of the
default as appropriate.
(get_alpha_reloc_tag): New. Split from ...
(emit_insn): ... here. Allocate a reloc tag for GPDISP.
(assemble_tokens): Don't search macros if user relocation present.
Copy reloc sequence number to insn struct.
(emit_ldgp): Remove user reloc handling.
(load_expression, emit_lda, emit_ldah, emit_ir_load): Likewise.
(emit_loadstore, emit_ldXu, emit_ldil, emit_stX): Likewise.
(emit_sextX, emit_division, emit_jsrjmp, emit_retjcr): Likewise.
* config/tc-alpha.h (tc_adjust_symtab): Always define.
(struct alpha_fix_tag): Name members less literal specific.
* gas/alpha/alpha.exp: New file.
* gas/alpha/elf-reloc-1.[sd]: New test.
* gas/alpha/elf-reloc-2.[sl]: New test.
* gas/alpha/elf-reloc-3.[sl]: New test.
* gas/alpha/elf-reloc-4.[sd]: New test.
* gas/alpha/fp.exp: Remove file.
* gas/alpha/fp.s: Output to .data not .rdata.
* gas/alpha/fp.d: Adjust to match.
* gas/all/gas.exp (930509a): Expect failure on the H8/300 ELF port.
* gas/h8300/ffxx1-elf.d: Update due to recent changes to H8/300
ELF toolchain.
* gas/h8300/h8300-elf.exp: Likewise.
* gas/macros/macros.exp: Expect failure on all H8/300 ports.
* gas/vtable/vtable.exp: Do not run tests on H8/300 ELF ports.
mips.
* gas/mips/mips.exp: Likewise. Use traditional testcases for
mips${el}16-f if needed.
* gas/mips/elempic.d: New file, testcase for little endian empic.
* gas/mips/elfel-rel2.d: Don't test trailing zeroes in dump.
* gas/mips/mips16-f.d: Use non-traditional symbol sorting.
* gas/mips/mipsel16-f.d: Likewise.
* gas/mips/mipsel16-e.d: New file, testcase for little endian MIPS16
relocations.
* gas/mips/tmipsel16-f.d: New file, testcase for little endian MIPS16
relocations, traditional variant.
Hans-Peter Nilsson
Chris Demetriou
Nick Clifton
Stephane Carrez
H.J. Lu
Matthew Green
Aldy Hernandez
Thiemo Seufer
Eric Christopher
Richard Henderson
Jeff Law
Joern Rennecke
Alan Modra
Richard Sandiford