These targets use the ELF format according to `bfd/config.bfd'.
binutils/
* testsuite/lib/binutils-common.exp (is_elf_format): Also return
1 for `*-*-lynxos*' and `*-*-symbianelf*' targets.
Fixes these fails:
nds32le-linux +FAIL: binutils-all/strip-14
nds32le-linux +FAIL: binutils-all/strip-15
pru-elf +FAIL: binutils-all/strip-14
pru-elf +FAIL: binutils-all/strip-15
strip-13 fails on nds32 due to an assertion failure and out of bounds
access to nds32_elf_howto_table.
* testsuite/binutils-all/objcopy.exp (strip-14, strip-15): Choose
reloc=11 for pru and reloc=50 for nds32.
* testsuite/binutils-all/strip-15.d: Accept 0xb reloc number.
Verify that `strip' completes successfully and a correct relocation
entry is copied for a relocation encountered with the STN_UNDEF symbol
index.
binutils/
* testsuite/binutils-all/strip-15.d: New test.
* testsuite/binutils-all/strip-15rel.s: New test source.
* testsuite/binutils-all/strip-15rela.s: New test source.
* testsuite/binutils-all/strip-15mips64.s: New test source.
* testsuite/binutils-all/objcopy.exp: Run the new test.
Verify that `strip' terminates gracefully and a correct error message is
produced for a relocation encountered with an invalid symbol index. No
single relocation number is valid across all targets we support, so pick
a few numbers to choose from depending on the target.
binutils/
* testsuite/binutils-all/strip-14.d: New test.
* testsuite/binutils-all/strip-14rel.s: New test source.
* testsuite/binutils-all/strip-14rela.s: New test source.
* testsuite/binutils-all/strip-14mips64.s: New test source.
* testsuite/binutils-all/objcopy.exp: Run the new test.
I happened to notice that objdump was not printing "Rust" when showing
the DW_AT_language for a CU:
<10> DW_AT_language : 28 (Unknown: 1c)
This patch adds all the new language constants from DWARF 5 to
binutils/dwarf.c.
2018-04-06 Tom Tromey <tom@tromey.com>
* dwarf.c (read_and_display_attr_value): Add missing DW_LANG
constants from DWARF 5.
config/plugins.m4 has
if test "$plugins" = "yes"; then
AC_SEARCH_LIBS([dlopen], [dl])
fi
Plugin uses dlsym, but libasan.so only intercepts dlopen, not dlsym:
[hjl@gnu-tools-1 binutils-text]$ nm -D /lib64/libasan.so.4| grep " dl"
0000000000038580 W dlclose
U dl_iterate_phdr
000000000004dc50 W dlopen
U dlsym
U dlvsym
[hjl@gnu-tools-1 binutils-text]$
Testing dlopen for libdl leads to false negative when -fsanitize=address
is used. It results in link failure:
../bfd/.libs/libbfd.a(plugin.o): undefined reference to symbol 'dlsym@@GLIBC_2.16'
dlsym should be used to check if libdl is needed for plugin.
bfd/
PR gas/22318
* configure: Regenerated.
binutils/
PR gas/22318
* configure: Regenerated.
gas/
PR gas/22318
* configure: Regenerated.
gprof/
PR gas/22318
* configure: Regenerated.
ld/
PR gas/22318
* configure: Regenerated.
Fix a typo: `.dc.w' -> `.dc.l' in `strip-13mips64.s', correcting a bug
from commit 2f8ceb3899 ("binutils/testsuite: Support REL and MIPS64
reloc formats with `strip-13'"). For relocation format correctness only
as there is no observable change in test results due to the lack of
connection between the second relocation entry affected and the examined
error message produced.
binutils/
* testsuite/binutils-all/strip-13mips64.s: Use `.dc.l' rather
than `.dc.w' in second relocation.
Avoid false positives and actually verify both that an `unsupported
relocation type 0x8f' message is produced and that no other message is,
except for the final `bad value', in the `strip-13' test. This ensures
that it is a relocation processing error and not a different issue that
has caused `strip' to terminate unsuccessfully, and that the number
representing the unsupported relocation has not been clobbered.
binutils/
* testsuite/binutils-all/strip-13.d: Also expect `unsupported
relocation type 0x8f' error message.
Add source variants for the `strip-13' test that produce relocations in
the REL and MIPS64 formats, fixing a failure for the `mips64el-openbsd'
target. This also corrects output for `i*86-*', `i960-*', `m6812-*' and
`m68hc12-*', o32 `mips*-*', and `score*-*' targets, which however does
not show up as a test result change due to lax error message matching
causing `bad value' previously produced by `strip' as a result of input
file rejection to be accepted as a test pass.
For `m6811-*' aka `m68hc11-*' targets this causes a phantom regression,
because they use 16-bit addressing and therefore `.dc.a' emits 16-bit
quantities causing relocation data constructed in assembly not to be as
expected. Previously input was rejected by `strip' with a `bad value'
message and now it is accepted, however due to the relocation data error
the relocation number is not one of the unsupported ones and the tool
completes successfully, which scores as a test failure.
Disable the test case for `m6811-*' and `m68hc11-*' targets then, as it
is a test case bug rather than a problem with the relevant backend. A
separate change to the test case is required to correct this problem, at
which point the test case can be enabled for the affected targets.
binutils/
* testsuite/binutils-all/strip-13.s: Rename to...
* testsuite/binutils-all/strip-13rela.s: ... this.
* testsuite/binutils-all/strip-13rel.s: New test source.
* testsuite/binutils-all/strip-13mips64.s: New test source.
* testsuite/binutils-all/strip-13.d: Remove `arm-*', `d10v-*',
`dlx-*' and `xgate-*' from `not-target' list. Add `m6811-*' and
`m68hc11-*' to `not-target' list.
* testsuite/binutils-all/objcopy.exp: Switch between sources for
`strip-13'.
Based on relocations defined in include/elf/*.h files we have relocation
numbers: 143, 159, 214 and 215 currently not used by any of our ELF
targets. Use 143 then instead of 241 to enable the `strip-13' test for
`hppa*-*' targets. It has a side effect with some targets of verifying
that unused relocations whose numbers are below the respective R_*_max
value are handled correctly.
binutils/
* testsuite/binutils-all/strip-13.s: Use 143 (0x8f) rather than
241 (0xf1) for the relocation number and RELA addend.
* testsuite/binutils-all/strip-13.d: Remove `hppa*-*' from the
`not-target' list.
* readelf.c (get_symbol_for_build_attribute): Skip ARM mapping
symbols.
(print_gnu_build_attribute_description): If no file start symbol
could be found, look for one two bytes into the file.
* testsuite/binutils-all/note-4-64.s: Set the address of the file
start symbol to two bytes into the file.
* testsuite/binutils-all/note-4-32.s: Likewise.
The following bits in DT_FLAGS_1 are used by Solaris:
#define DF_1_KMOD 0x10000000 /* kernel module */
#define DF_1_WEAKFILTER 0x20000000 /* apply weak binding to DT_FILTER */
#define DF_1_NOCOMMON 0x40000000 /* no COMMON symbols exist */
binutils/
* readelf.c (process_dynamic_section): Also dump DF_1_KMOD,
DF_1_WEAKFILTER and DF_1_NOCOMMON.
include/
* elf/common.h (DF_1_KMOD): New.
(DF_1_WEAKFILTER): Likewise.
(DF_1_NOCOMMON): Likewise.
PR 22955
* stabs.c (parse_number): Add p_end parameter and use it to check
the validity of the pp parameter. Add checks to prevent walking
off the end of the string buffer.
(parse_stab_string): Likewise.
(parse_stab_type): Likewise.
(parse_stab_type_number): Likewise.
(parse_stab_range_type): Likewise.
(parse_stab_sun_builtin_type): Likewise.
(parse_stab_sun_floating_type): Likewise.
(parse_stab_enum_type): Likewise.
(parse_stab_struct_type): Likewise.
(parse_stab_baseclasses): Likewise.
(parse_stab_struct_fields): Likewise.
(parse_stab_cpp_abbrev): Likewise.
(parse_stab_one_struct_field): Likewise.
(parse_stab_members): Likewise.
(parse_stab_tilde_field): Likewise.
(parse_stab_array_type): Likewise.
* parse_stab: Compute the end of the string and then pass it on to
individual parser functions.
xcoff (32-bit) objdump accepted but ignored -M options unless
-mpowerpc was also given. This patch fixes that, leaving the default
as -Mpwr for xcoff. I've also enabled more tests for xcoff targets.
binutils/
* configure.ac: Add objdump_private_desc_xcoff for rs6000.
* configure: Regenerate.
gas/
* testsuite/gas/ppc/aix.exp: Run for rs6000 too.
* testsuite/gas/ppc/ppc.exp: Run more tests for non-ELF targets.
* testsuite/gas/ppc/machine.d: Don't run for PE targets.
opcodes/
* disassemble.c (disassembler): Use bfd_arch_powerpc entry for
bfd_arch_rs6000.
* disassemble.h (print_insn_rs6000): Delete.
* ppc-dis.c (powerpc_init_dialect): Handle rs6000.
(disassemble_init_powerpc): Call powerpc_init_dialect for rs6000.
(print_insn_rs6000): Delete.
Replace linear search with binary search on dynamic relocations. After
finding a match, scan backward to the first matching relocation, then
scan forward for a matching relocation with non-absolute symbol.
On Fedora 27 x86-64, time for "objdump -d" on libxul.so from RHEL 7.4
x86-64 went from
134.46user 0.12system 2:15.03elapsed
to
8.49user 0.14system 0:08.64elapsed
PR binutils/22911
* objdump.c (is_significant_symbol_name): Return TRUE for all
.plt* sections.
(find_symbol_for_address): Replace linear search with binary
search on dynamic relocations.
This fixes the case where all of a group is removed with ld -r, the
situation in the PR, and failures where part of a group is removed
that contain relocs.
bfd/
PR 22836
* elf.c (_bfd_elf_fixup_group_sections): Account for removed
relocation sections. If size reduces to just the flag word,
remove that too and mark with SEC_EXCLUDE.
* elflink.c (bfd_elf_final_link): Strip empty group sections.
binutils/
* testsuite/binutils-all/group-7.s,
* testsuite/binutils-all/group-7a.d,
* testsuite/binutils-all/group-7b.d,
* testsuite/binutils-all/group-7c.d: New tests.
* testsuite/binutils-all/objcopy.exp: Run them.
ld/
* testsuite/ld-elf/pr22836-2.d,
* testsuite/ld-elf/pr22836-2.s: New test.
PR 22793
* readelf.c (find_section): Replace assertion with test and return
of NULL.
(find_section_by_address): Add test of section header table
existance.
(find_section_by_type): Likewise.
(find_section_in_set): Likewise.
Report an error when an unsupported `.reginfo' section size is found in
`_bfd_mips_elf_section_processing', removing an assertion that triggers
at elfxx-mips.c:7105 in GAS when assembling input like:
.section .reginfo
.word 0xdeadbeef
and in `objcopy --rename-section' when renaming an incorrectly sized
section to `.reginfo'.
bfd/
* elfxx-mips.c (_bfd_mips_elf_section_processing): For
SHT_MIPS_REGINFO sections don't assert the correct size and
report an error instead.
binutils/
* testsuite/binutils-all/mips/mips-reginfo.d: New test.
* testsuite/binutils-all/mips/mips-reginfo-n32.d: New test.
* testsuite/binutils-all/mips/mips-reginfo.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
gas/
* testsuite/gas/mips/reginfo-2.d: New test.
* testsuite/gas/mips/reginfo-2-n32.d: New test.
* testsuite/gas/mips/reginfo-2.l: New test stderr output.
* testsuite/gas/mips/reginfo-2.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Add support for the `error', `error_output', `warning' and
`warning_output' options for `run_dump_test' input files, based on the
version of the procedure in ld/testsuite/lib/ld-lib.exp and providing
compatible semantics. These options apply to PROG under test and let
test cases specify output expected on stderr as well as express a
requirement for PROG to exit unsuccessfully. Messages to match against
can be supplied either inline or fetched from a named file. Update
procedure description in the introductory comment accordingly.
As the exit status from `remote_exec' is regrettably lost in our default
implementation of `binutils_run', which is user-overridable, avoid
changing this procedure's API and use a global `binutils_run_status'
variable to pass the status up to the caller, similarly to how
`binutils_run_failed' is handled. Document the new variable in the
respective introductory comments.
binutils/
* testsuite/config/default.exp (binutils_run): Document
`binutils_run_status'.
* testsuite/lib/utils-lib.exp (default_binutils_run): Likewise,
and set it.
(run_dump_test): Add `error', `error_output', `warning' and
`warning_output' options. Update documentation accordingly.
Adds a register name table for RiscV so that objdump and readelf can
both use better register names.
binutils/ChangeLog:
* dwarf.c (dwarf_regnames_riscv): New register name table.
(init_dwarf_regnames_riscv): New function.
(init_dwarf_regnames): Add call to initialise RiscV register
names.
* dwarf.h (init_dwarf_regnames_riscv): Declare.
* objdump.c (dump_dwarf): Add call to initialise RiscV register
names.
PR 22734
* doc/binutils.texi (nm): Update description to point out that
zero-initialized values can also be shown as type B, b, S or s
since they can be stored in the BSS section.
Following my recent transition from Imagination Technologies to the
reincarnated MIPS company update MAINTAINERS entries accordingly.
binutils/
* MAINTAINERS: Update my company e-mail address.
gdb/
* MAINTAINERS: Update my company e-mail address.
sim/
* MAINTAINERS: Update my company e-mail address.
Alan Modra
Nick Clifton
Maciej W. Rozycki
Tom Tromey
H.J. Lu
John David Anglin
Paul Pluzhnikov
Ronald Hoogenboom
Matthias Klose
Andrew Burgess
Joel Brobecker