Thiago Jung Bauermann <bauerman@br.ibm.com>
Support for hw accelerated condition watchpoints in booke powerpc.
* breakpoint.c (fetch_watchpoint_value): Rename to fetch_subexp_value
and move to eval.c. Change callers.
(insert_bp_location): Pass watchpoint condition in
target_insert_watchpoint.
(remove_breakpoint_1) Pass watchpoint condition in
target_remove_watchpoint.
(watchpoint_locations_match): Call
target_can_accel_watchpoint_condition.
* eval.c: Include wrapper.h.
(fetch_subexp_value): Moved from breakpoint.c.
* ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint):
Formatting fix.
(can_use_watchpoint_cond_accel): New function.
(calculate_dvc): Likewise.
(num_memory_accesses): Likewise.
(check_condition): Likewise.
(ppc_linux_can_accel_watchpoint_condition): Likewise
(ppc_linux_insert_watchpoint): Call can_use_watchpoint_cond_accel,
check_condition and calculate_dvc.
(ppc_linux_remove_watchpoint): Likewise.
(_initialize_ppc_linux_nat): Set to_can_accel_watchpoint_condition to
ppc_linux_can_accel_watchpoint_condition
* target.c (debug_to_insert_watchpoint): Add argument for watchpoint
condition.
(debug_to_remove_watchpoint): Likewise.
(debug_to_can_accel_watchpoint_condition): New function.
(update_current_target): Set to_can_accel_watchpoint_condition.
(setup_target_debug): Set to_can_accel_watchpoint_condition.
* target.h: Add opaque declaration for struct expression.
(struct target_ops) <to_insert_watchpoint>,
<to_remove_watchpoint>: Add new arguments to pass the watchpoint
<to_can_accel_watchpoint_condition>: New member.
condition. Update all callers and implementations.
(target_can_accel_watchpoint_condition): New macro.
* value.c (free_value_chain): New function.
* value.h (fetch_subexp_value): New prototype.
(free_value_chain): Likewise.
This is on GNU/Linux.
GDBserver does not exit properly when the inferior exits, as demonstrated
with any program using the procedure below:
% gdbserver-head :4444 simple_main
Process simple_main created; pid = 25681
Listening on port 4444
Then, in another terminal, start GDB, connect to GDBserver, and run
the program to completion:
% gdb-head simple_main
(gdb) tar rem :4444
(gdb) cont
Continuing.
Program exited normally.
Going back to the terminal where GDBserver is running, we see the following
output:
Child exited with status 0
readchar: Got EOF
Remote side has terminated connection. GDBserver will reopen the connection.
Listening on port 4444
The problem is that we're missing a call to mourn_inferior. As a result,
after we've handled the vCont packet, we fail to notice that there are
no process left to debug (target_running() returns true), and thus try
to continue reading from the remote socket. However, since GDB just
disconnected after having received the "exit with status 0" reply to the
vCont request, the read triggers the EOF exception.
gdb/gdbserver/ChangeLog:
* server.c (handle_v_cont): Call mourn_inferior if process
just exited.
(myresume): Likewise.
from gdbarch_core_regset_sections also for .reg if present.
* amd64-linux-tdep.c (amd64_linux_regset_sections): Fix incorrect
section size for .reg.
* ppc-linux-tdep.c (ppc_linux_vsx_regset_sections): Likewise.
(ppc_linux_vmx_regset_sections): Likewise.
(ppc_linux_fp_regset_sections): Likewise.
(ppc64_linux_vsx_regset_sections): New variable.
(ppc64_linux_vmx_regset_sections): Likewise.
(ppc64_linux_fp_regset_sections): Likewise.
(ppc_linux_init_abi): Install core_regset_section lists appropriate
for current word size.
I just happened to notice that this function was exclusively used in
server.c, and thus could be made static.
2010-07-06 Joel Brobecker <brobecker@adacore.com>
* server.c (myresume): Make static.
2010-07-06 Ken Werner <ken.werner@de.ibm.com>
* floatformat.h (floatformat_ieee_half_big): Add declaration.
(floatformat_ieee_half_little): Likewise.
libiberty/ChangeLog:
2010-07-06 Ken Werner <ken.werner@de.ibm.com>
* floatformat.c (floatformat_ieee_half_big): New variable.
(floatformat_ieee_half_little): Likewise.
gdb/ChangeLog:
2010-07-06 Ken Werner <ken.werner@de.ibm.com>
* gdbtypes.h (floatformats_ieee_half): Add declaration.
* gdbtypes.c (floatformats_ieee_half): New variable.
* doublest.c (floatformat_from_length): Set format to
gdbarch_half_format if length matches.
* gdbarch.sh (half_bit): New architecture method.
(half_format): Likewise.
* gdbarch.h: Regenerate.
* gdbarch.c: Likewise.
* elf32-ppc.c (ppc_elf_relax_section): Insert branch around
trampolines only for .init and .fini sections.
ld/testsuite/
* ld-powerpc/relax.s: Add branch back to _start.
* ld-powerpc/relax.d: Update.
* ld-powerpc/relaxr.d: Update.
* config/tc-mips.c (mips_frob_file): Use symbol_same_p to match
symbols.
gas/testsuite/
* gas/mips/elf-rel27.d: New test for HI16/LO16 relocation
pairing.
* gas/mips/elf-rel27.s: Source for the new test.
* gas/mips/mips.exp: Create "mips16" architecture. Adjust
conditions involving negated properties throughout to require
"mips1" as appropriate. Run the new test.
(mips_arch_destroy): New procedure.
branch-likely instructions and place them...
* gas/mips/mips4-branch-likely.d, gas/mips/mips4-branch-likely.s:
... in this new test.
* gas/mips/mips4-fp.l: Update accordingly.
* gas/mips/mips4-branch-likely.l: New stderr output for the new
test.
* gas/mips/mips.exp (mips4-branch-likely): Run a dump test and
a list test with mips4-branch-likely similarly to mips4-fp.
branch-likely instructions.
* gas/mips/bge.d, gas/mips/bge.s: Likewise.
* gas/mips/bgeu.d, gas/mips/bgeu.s: Likewise.
* gas/mips/blt.d, gas/mips/blt.s: Likewise.
* gas/mips/bltu.d, gas/mips/bltu.s: Likewise.
* gas/mips/branch-likely.d, gas/mips/branch-likely.s: New test,
collecting checks for branch-likely instructions removed from
the above.
* gas/mips/mips.exp: Run the new test and update the
constraints for the updated tests to include MIPS I.
Fix re-run of PIE executable, PR shlibs/11776.
* solib-svr4.c (svr4_relocate_main_executable) <symfile_objfile>: Remove
the part of pre-set SYMFILE_OBJFILE->SECTION_OFFSETS.
gdb/testsuite/
Fix re-run of PIE executable, PR shlibs/11776.
* gdb.base/break-interp.exp (test_ld): Turn off "disable-randomization".
Remove $displacement_main to match the solib-svr4.c change. New "kill"
and re-"run" of the inferior.
Cope with missing /usr/sbin/prelink.
* lib/prelink-support.exp (prelink_no):
<result == 1 && $output is "no such file or directory">: New.
(prelink_yes): Likewise. Return on failed prelink_no.
* gdb.base/attach-pie-misread.exp: Load prelink-support.exp. Replace
build_executable by build_executable_own_libs. Replace "prelink -R"
execution by a call of prelink_yes. Comment why "prelink -r" needs no
change.
* gdb.base/break-interp.exp: Load prelink-support.exp. Rename calls of
copy to file_copy. Move setting opts --dynamic-linker and -rpath,
mkdir $dir and ldd its parsing and copying to lib/prelink-support.exp.
Replace build_executable by build_executable_own_libs's function
build_executable_own_libs.
(prelinkNO): Create new stub to call prelink_no.
(prelinkYES): Create new stub to call prelink_yes.
(test_attach): Rename calls of copy to file_copy.
(section_get, prelinkNO_run, prelinkNO, prelinkYES, symlink_resolve)
(copy): Move to ...
* lib/prelink-support.exp: ... a new file. Rename prelinkNO to
prelink_no, prelinkYES to prelink_yes, copy to file_copy.
* gdb.base/prelink.exp: Disable testcase also for is_remote and
skip_shlib_tests. Load prelink-support.exp. Replace gdb_compile with
special flags by gdb_compile_shlib. Replace second gdb_compile by
build_executable_own_libs. Replace "prelink -R" execution by a call of
prelink_yes. Replace "prelink -u" and second "prelink -R" execution by
a second call of prelink_yes. Replace restart commands by
clean_restart.
(prelink): Rename to ...
(seen displacement message): ... this test. Extend its expectation
strictness.
Fix attaching to PIEs prelinked on the disk after the process was
started.
* solib-svr4.c (svr4_exec_displacement): New variable arch_size.
Verify it against bfd_get_arch_size. Try to match arbitrary
displacement for the phdrs comparison.
gdb/testsuite/
* gdb.base/break-interp.exp: Run $binpie with new value "ATTACH", new
code for it. New variable relink_args.
(prelinkYES): Call prelinkNO.
(test_attach): Accept new parameter relink_args. Re-prelink the binary
in such case. Move the core code to ...
(test_attach_gdb): ... a new function. Send GDB command "file".
Extend expected "Attaching to " string.
Joel Brobecker
Nathan Sidwell
Alan Modra
gdbadmin
Kevin Buettner
Doug Evans
Tom Tromey
Thiago Jung Bauermann
Ulrich Weigand
H.J. Lu
Andreas Schwab
Maciej W. Rozycki
Jan Kratochvil
Jan Beulich